AI Paraphrasing Tool

AI Paraphrasing Tool — hands-on reviews, top picks, pricing, pros and cons and a practical how-to guide on Aizhi.

Supervisor Mode Access Prevention

Supervisor Mode Access Prevention (SMAP) is a feature of some CPU implementations such as the Intel Broadwell microarchitecture that allows supervisor mode programs to optionally set user-space memory mappings so that access to those mappings from supervisor mode will cause a trap. This makes it harder for malicious programs to "trick" the kernel into using instructions or data from a user-space program. == History == Supervisor Mode Access Prevention is designed to complement Supervisor Mode Execution Prevention (SMEP), which was introduced earlier. SMEP can be used to prevent supervisor mode from unintentionally executing user-space code. SMAP extends this protection to reads and writes. == Benefits == Without Supervisor Mode Access Prevention, supervisor code usually has full read and write access to user-space memory mappings (or has the ability to obtain full access). This has led to the development of several security exploits, including privilege escalation exploits, which operate by causing the kernel to access user-space memory when it did not intend to. Operating systems can block these exploits by using SMAP to force unintended user-space memory accesses to trigger page faults. Additionally, SMAP can expose flawed kernel code which does not follow the intended procedures for accessing user-space memory. However, the use of SMAP in an operating system may lead to a larger kernel size and slower user-space memory accesses from supervisor code, because SMAP must be temporarily disabled any time supervisor code intends to access user-space memory. == Technical details == Processors indicate support for Supervisor Mode Access Prevention through the Extended Features CPUID leaf. SMAP is enabled when memory paging is active and the SMAP bit in the CR4 control register is set. SMAP can be temporarily disabled for explicit memory accesses by setting the EFLAGS.AC (Alignment Check) flag. The stac (Set AC Flag) and clac (Clear AC Flag) instructions can be used to easily set or clear the flag. When the SMAP bit in CR4 is set, explicit memory reads and writes to user-mode pages performed by code running with a privilege level less than 3 will always result in a page fault if the EFLAGS.AC flag is not set. Implicit reads and writes (such as those made to descriptor tables) to user-mode pages will always trigger a page fault if SMAP is enabled, regardless of the value of EFLAGS.AC. == Operating system support == Linux kernel support for Supervisor Mode Access Prevention was implemented by H. Peter Anvin. It was merged into the mainline Linux 3.7 kernel (released December 2012) and it is enabled by default for processors which support the feature. FreeBSD has supported Supervisor Mode Execution Prevention since 2012 and Supervisor Mode Access Prevention since 2018. OpenBSD has supported Supervisor Mode Access Prevention and the related Supervisor Mode Execution Prevention since 2012, with OpenBSD 5.3 being the first release with support for the feature enabled. NetBSD support for Supervisor Mode Execution Prevention (SMEP) was implemented by Maxime Villard in December 2015. Support for Supervisor Mode Access Prevention (SMAP) was also implemented by Maxime Villard, in August 2017. NetBSD 8.0 was the first release with both features supported and enabled. Haiku support for Supervisor Mode Execution Prevention (SMEP) was implemented by Jérôme Duval in January 2018. macOS has support for SMAP at least since macOS 10.13 released 2017.
Read more →
Artificial intelligence in India

The artificial intelligence (AI) market in India is projected to reach $8 billion by 2025, growing at 40% CAGR from 2020 to 2025. This growth is part of the broader AI boom, a global period of rapid technological advancements with India being pioneer starting in the early 2010s with NLP based Chatbots from Haptik, Corover.ai, Niki.ai and then gaining prominence in the early 2020s based on reinforcement learning, marked by breakthroughs such as generative AI models from Krutrim, Sarvam, CoRover, OpenAI and Alphafold by Google DeepMind. In India, the development of AI has been similarly transformative, with applications in healthcare, finance, and education, bolstered by government initiatives like NITI Aayog's 2018 National Strategy for Artificial Intelligence. Institutions such as the Indian Statistical Institute and the Indian Institute of Science published breakthrough AI research papers and patents. India's transformation to AI is primarily being driven by startups and government initiatives & policies like Digital India. By fostering technological trust through digital public infrastructure, India is tackling socioeconomic issues by taking a bottom-up approach to AI. NASSCOM and Boston Consulting Group estimate that by 2027, India's AI services might be valued at $17 billion. According to 2025 Technology and Innovation Report, by UN Trade and Development, India ranks 10th globally for private sector investments in AI. According to Mary Meeker, India has emerged as a key market for AI platforms, accounting for the largest share of ChatGPT's mobile app users and having the third-largest user base for DeepSeek in 2025. While AI presents significant opportunities for economic growth and social development in India, challenges such as data privacy concerns, skill shortages, and ethical considerations need to be addressed for responsible AI deployment. The growth of AI in India has also led to an increase in the number of cyberattacks that use AI to target organizations. == History == === Early days (1960s-1980s) === The TIFRAC (Tata Institute of Fundamental Research Automatic Calculator) was designed and developed by a team led by Rangaswamy Narasimhan between 1954 and 1960. He worked on pattern recognition from 1961 to 1964 at the University of Illinois Urbana-Champaign's Digital Computer Laboratory. In order to conduct research on database technology, computer networking, computer graphics, and systems software, he and M. G. K. Menon founded the National Centre for Software Development and Computing Techniques. In 1965, he established the Computer Society of India and supervised the initial research work on AI at Tata Institute of Fundamental Research. Jagdish Lal launched the first computer science program in 1976 at Motilal Nehru Regional Engineering College. H. K. Kesavan from the University of Waterloo and Vaidyeswaran Rajaraman from the University of Wisconsin–Madison joined the IIT Kanpur Electrical Engineering Department in 1963–1964 as Assistant Professor and Head of Department, respectively. H.N. Mahabala, who was employed at Bendix Corporation's Computer Division, joined the department in 1965. He previously worked with Marvin Minsky. The IIT Kanpur Computer Center was led by H. K. Kesavan, with Vaidyeswaran Rajaraman serving as his deputy. Kesavan informally permitted Rajaraman and Mahabala to introduce artificial intelligence into computer science classes. The computer science program was approved by IIT Kanpur in 1971 and split out from the electrical engineering department. In 1973, an IBM System/370 Model 155 was installed at IIT Madras. John McCarthy, head of the Artificial Intelligence Laboratory at Stanford University visited IIT Kanpur in 1971. He donated PDP-1 with a time-sharing operating system. During the 1970s, the balance of payments deficit in India restricted import of computers. The Department of Computer Science and Automation at the Indian Institute of Science established in 1969, played an important role in nurturing the development of data science and artificial intelligence in India. First course on AI was introduced in the 1970s by G. Krishna. B. L. Deekshatulu introduced the first course on pattern recognition in the early 1970s. === Foundation phase === ==== 1980s ==== In the 1980s, the Indian Statistical Institute's Optical Character Recognition Project was one of the country's first attempts at studying artificial intelligence and machine learning. OCR technology has benefited greatly from the work of ISI's Computer Vision and Pattern Recognition Unit, which is headed by Bidyut Baran Chaudhuri. He also contributed in the development of computer vision and digital image processing. As part of the Indian Fifth Generation Computer Systems Research Programme, the Department of Electronics, with support from the United Nations Development Programme, initiated the Knowledge Based Computer Systems Project in 1986, marking the beginning of India's first major AI research program. Prime Minister Rajiv Gandhi requested that the Department of Electronics and IISc to initiate the Parallel Processing Project in 1986–1987. The Center for Development of Advanced Computing eventually joined those efforts. IIT Madras was selected to develop system diagnosis, ISI for image processing, National Centre for Software Technology for natural language processing and TIFR for speech processing. In 1987, the proposal of N. Seshagiri, Director General of the National Informatics Centre for the prototype development of supercomputer was cleared. Negotiations for a Cray supercomputer were underway between the Reagan administration and the Rajiv Gandhi government. US Defense Secretaries Frank Carlucci and Caspar Weinberger visited New Delhi after the US approved the transfer in 1988. The sale of a lower-end XMP-14 supercomputer was permitted in lieu of the Cray XMP-24 supercomputer due to security concerns. The Center for Development of Advanced Computing was formally established in March 1988 by the Ministry of Communications and Information Technology (previously the Ministry of IT) within the Department of Information Technology (formerly the Department of Electronics) in response to a recommendation made to the Prime Minister by the Scientific Advisory Council. The National Initiative in Supercomputing, which produced the PARAM series, was led by Vijay P. Bhatkar. For the first ten years, supercomputing and Indian language computing were the two main focus areas. C-DAC has expanded its operations in order to meet the needs in a number of domains, including network and internet software, real-time systems, artificial intelligence, and NLP. Under the direction of Professor KV Ramakrishnamacharyulu from National Sanskrit University and Professor Rajeev Sangal from the International Institute of Information Technology, Hyderabad, the Akshar Bharati Research Group was established in 1984 with support from IIT Kanpur and the University of Hyderabad for computational processing of Indian languages. They focused on computational linguistics, NLP with ontological database systems, and Indian language/translation theories with linguistic tradition. ==== 1990s ==== From IIT Kanpur, Mohan Tambe joined C-DAC in the 1990s to work on Graphics and Intelligence based Script Technology (GIST), which addressed the challenge of adapting personal computer software based on Latin script to Devanagiri and a number of other Indian language scripts. He was previously working on the Machine Translation for Indian languages Project. Within C-DAC, he established the GIST group. The technology was expanded to encompass NLP, artificial intelligence-based machine-aided language learning and translation, multimedia and multilingual computing solutions, and more. GIST resulted in the creation of G-CLASS (GIST cross language search plug-ins suite), a cross-language search engine. The Applied Artificial Intelligence Group at C-DAC has developed some basic and novel applications in the field of NLP, including machine translation, information extraction/retrieval, automatic summarization, speech recognition, text-to-speech synthesis, intelligent language teaching, and natural language-based document management with Decision Support Systems. These applications are the result of the foundation laid by previous language technology activities. Software firms in the Indian private sector began looking into AI applications, mostly in the area of business process automation. In order to allow machines to read, comprehend, and interpret human languages, the Language Technologies Research Center was founded in October 1999 at the International Institute of Information Technology, Hyderabad. It focused on the advancements in semantic parsing, information extraction, natural language generation, sentiment analysis, and dialogue systems. Some of the early AI research in India was driven by societal needs. For example; Eklavya, a knowledge-based program created by I
Read more →
OpenSMILE

openSMILE is source-available software for automatic extraction of features from audio signals and for classification of speech and music signals. "SMILE" stands for "Speech & Music Interpretation by Large-space Extraction". The software is mainly applied in the area of automatic emotion recognition and is widely used in the affective computing research community. The openSMILE project exists since 2008 and is maintained by the German company audEERING GmbH since 2013. openSMILE is provided free of charge for research purposes and personal use under a source-available license. For commercial use of the tool, the company audEERING offers custom license options. == Application Areas == openSMILE is used for academic research as well as for commercial applications in order to automatically analyze speech and music signals in real-time. In contrast to automatic speech recognition which extracts the spoken content out of a speech signal, openSMILE is capable of recognizing the characteristics of a given speech or music segment. Examples for such characteristics encoded in human speech are a speaker's emotion, age, gender, and personality, as well as speaker states like depression, intoxication, or vocal pathological disorders. The software further includes music classification technology for automatic music mood detection and recognition of chorus segments, key, chords, tempo, meter, dance-style, and genre. The openSMILE toolkit serves as benchmark in manifold research competitions such as Interspeech ComParE, AVEC, MediaEval, and EmotiW. == History == The openSMILE project was started in 2008 by Florian Eyben, Martin Wöllmer, and Björn Schuller at the Technical University of Munich within the European Union research project SEMAINE. The goal of the SEMAINE project was to develop a virtual agent with emotional and social intelligence. In this system, openSMILE was applied for real-time analysis of speech and emotion. The final SEMAINE software release is based on openSMILE version 1.0.1. In 2009, the emotion recognition toolkit (openEAR) was published based on openSMILE. "EAR" stands for "Emotion and Affect Recognition". In 2010, openSMILE version 1.0.1 was published and was introduced and awarded at the ACM Multimedia Open-Source Software Challenge. Between 2011 and 2013, the technology of openSMILE was extended and improved by Florian Eyben and Felix Weninger in the context of their doctoral thesis at the Technical University of Munich. The software was also applied for the project ASC-Inclusion, which was funded by the European Union. For this project, the software was extended by Erik Marchi in order to teach emotional expression to autistic children, based on automatic emotion recognition and visualization. In 2013, the company audEERING acquired the rights to the code-base from the Technical University of Munich and version 2.0 was published under a source-available research license. Until 2016, openSMILE was downloaded more than 50,000 times worldwide and has established itself as a standard toolkit for emotion recognition. == Awards == openSMILE was awarded in 2010 in the context of the ACM Multimedia Open Source Competition. The software tool is applied in numerous scientific publications on automatic emotion recognition. openSMILE and its extension openEAR have been cited in more than 1000 scientific publications until today.
Read more →
Algorithmic Puzzles

Algorithmic Puzzles is a book of puzzles based on computational thinking. It was written by computer scientists Anany and Maria Levitin, and published in 2011 by Oxford University Press. == Topics == The book begins with a "tutorial" introducing classical algorithm design techniques including backtracking, divide-and-conquer algorithms, and dynamic programming, methods for the analysis of algorithms, and their application in example puzzles. The puzzles themselves are grouped into three sets of 50 puzzles, in increasing order of difficulty. A final two chapters provide brief hints and more detailed solutions to the puzzles, with the solutions forming the majority of pages of the book. Some of the puzzles are well known classics, some are variations of known puzzles making them more algorithmic, and some are new. They include: Puzzles involving chessboards, including the eight queens puzzle, knight's tours, and the mutilated chessboard problem Balance puzzles River crossing puzzles The Tower of Hanoi Finding the missing element in a data stream The geometric median problem for Manhattan distance == Audience and reception == The puzzles in the book cover a wide range of difficulty, and in general do not require more than a high school level of mathematical background. William Gasarch notes that grouping the puzzles only by their difficulty and not by their themes is actually an advantage, as it provides readers with fewer clues about their solutions. Reviewer Narayanan Narayanan recommends the book to any puzzle aficionado, or to anyone who wants to develop their powers of algorithmic thinking. Reviewer Martin Griffiths suggests another group of readers, schoolteachers and university instructors in search of examples to illustrate the power of algorithmic thinking. Gasarch recommends the book to any computer scientist, evaluating it as "a delight".
Read more →
Floyd–Steinberg dithering

Floyd–Steinberg dithering is an image dithering algorithm first published in 1976 by Robert W. Floyd and Louis Steinberg. It is commonly used by image manipulation software, for example, when converting an image from a Truecolor 24-bit PNG format into a GIF format, which is restricted to a maximum of 256 colors. == Implementation == The algorithm achieves dithering using error diffusion, meaning it pushes (adds) the residual quantization error of a pixel onto its neighboring pixels, to be quantized after. It spreads the debt out according to the distribution (shown as a map of the neighboring pixels): [ ∗ 7 16 … … 3 16 5 16 1 16 … ] {\displaystyle {\begin{bmatrix}&&&{\frac {\displaystyle 7}{\displaystyle 16}}&\ldots \\\ldots &{\frac {\displaystyle 3}{\displaystyle 16}}&{\frac {\displaystyle 5}{\displaystyle 16}}&{\frac {\displaystyle 1}{\displaystyle 16}}&\ldots \\\end{bmatrix}}} The pixel indicated with a star () indicates the pixel currently being scanned, and the blank pixels are the previously scanned pixels. The specific values (7/16, 3/16, 5/16, 1/16) were originally found by trial-and-error, "guided by the desire to have a region of desired density 0.5 come out as a checkerboard pattern". The algorithm scans the image from left to right, top to bottom, quantizing pixel values one by one. Each time, the quantization error is transferred to the neighboring pixels, while not affecting the pixels that already have been quantized. Hence, if a number of pixels have been rounded downwards, it becomes more likely that the next pixel is rounded upwards, such that on average, the quantization error is close to zero. The diffusion coefficients have the property that if the original pixel values are exactly halfway in between the nearest available colors, the dithered result is a checkerboard pattern. For example, 50% grey data could be dithered as a black-and-white checkerboard pattern. For optimal dithering, the counting of quantization errors should be in sufficient accuracy to prevent rounding errors from affecting the result. For correct results, all values should be linearized first, rather than operating directly on sRGB values as is common for images stored on computers. In some implementations, the horizontal direction of scan alternates between lines; this is called "serpentine scanning" or boustrophedon transform dithering. The algorithm described above is in the following pseudocode. This works for any approximately linear encoding of pixel values, such as 8-bit integers, 16-bit integers or real numbers in the range [0, 1]. for each y from top to bottom do for each x from left to right do oldpixel := pixels[x][y] newpixel := find_closest_palette_color(oldpixel) pixels[x][y] := newpixel quant_error := oldpixel - newpixel pixels[x + 1][y ] := pixels[x + 1][y ] + quant_error × 7 / 16 pixels[x - 1][y + 1] := pixels[x - 1][y + 1] + quant_error × 3 / 16 pixels[x ][y + 1] := pixels[x ][y + 1] + quant_error × 5 / 16 pixels[x + 1][y + 1] := pixels[x + 1][y + 1] + quant_error × 1 / 16 When converting grayscale pixel values from a high to a low bit depth (e.g. 8-bit grayscale to 1-bit black-and-white), find_closest_palette_color() may perform just a simple rounding, for example: find_closest_palette_color(oldpixel) = round(oldpixel / 255) The pseudocode can result in pixel values exceeding the valid values (such as greater than 255 in 8-bit grayscale images). Such values should ideally be handled by the find_closest_palette_color() function, rather than clipping the intermediate values, since a subsequent error may bring the value back into range. However, if fixed-width integers are used, wrapping of intermediate values would cause inversion of black and white, and so should be avoided. The find_closest_palette_color() implementation is nontrivial for a palette that is not evenly distributed, however small inaccuracies in selecting the correct palette color have minimal visual impact due to error being propagated to future pixels. A nearest neighbor search in 3D is frequently used.
Read more →
CENDI

CENDI (Commerce, Energy, NASA, Defense Information Managers Group) is an interagency group of senior Scientific and Technical Information (STI) managers from 14 United States federal agencies. CENDI managers cooperate by exchanging information and ideas, collaborating to address common issues, and undertaking joint initiatives. CENDI's accomplishments range from impacting federal information policy to educating a broad spectrum of stakeholders on all aspects of federal STI systems, including its value to research and the taxpayer, and to operational improvements in agency and interagency STI operations. == History == CENDI traces its roots to the Committee on Scientific and Technical Information (COSATI) of the Federal Council on Science and Technology. COSATI was established in the early 1960s to coordinate the management of the results from the U.S. government's increasing commitment to scientific research and technology development. The scientific and technical information (STI) managers of the government's major research and development (R&D) agencies worked within COSATI to standardize guidelines for cataloging and indexing technical reports. COSATI ceased formal operations in the early 1970s. To continue the cooperation begun under COSATI, managers of agency STI programs from Commerce (National Technical Information Service), Energy (Office of Scientific and Technical Information), NASA (HQ/STI Division), and Defense (Defense Technical Information Center) began meeting periodically to discuss common topics and stimulate more effective cooperation. In 1985, a Memorandum of Understanding was signed by the four charter agencies and CENDI was established. From this small core of STI managers, CENDI has grown to its current membership, which represents the major science agencies, the national libraries, and agencies involved in the dissemination and long-term management of scientific and technical information. The vision of CENDI is to facilitate cooperative enterprise where capabilities are shared and challenges are faced together so that the sum of the accomplishments is greater than each individual agency can achieve on its own amongst federal STI agencies. The abbreviation CENDI refers to the "Commerce, Energy, NASA, Defense Information Managers Group". == Membership == New members from other federal R&D information organizations may be admitted by unanimous agreement of the members. However, it is the intent of the group that membership in CENDI should remain small and focus on organizations with STI or supporting responsibilities. Each agency provides funding to CENDI. == Members == The members of CENDI are: Defense Technical Information Center (United States Department of Defense) Office of Research and Development and Office of Environmental Information (United States Environmental Protection Agency) Government Printing Office Library of Congress NASA Scientific and Technical Information Program National Agricultural Library (United States Department of Agriculture) National Archives and Records Administration National Library of Education (United States Department of Education) National Library of Medicine (United States Department of Health and Human Services) National Science Foundation National Technical Information Service (United States Department of Commerce) National Transportation Library (United States Department of Transportation) Office of Scientific and Technical Information (United States Department of Energy) USGS/Biological Resources Discipline (United States Department of the Interior) == Mission and operation == CENDI's mission is to help improve the productivity of federal science- and technology-based programs through effective scientific, technical, and related information support systems. In fulfilling its mission, CENDI agencies play an important role in addressing science- and technology-based national priorities and strengthening U.S. competitiveness. === Goals === STI Coordination and Leadership: Provide coordination and leadership for information exchange on important STI policy issues. Improvement of STI Systems: Promote the development of improved STI systems through the productive interrelationship of content and technology. STI Understanding: Promote better understanding of STI and STI management. === Principals and Alternates === CENDI is made up of senior federal STI managers and each organization appoints a Principal representative. This person is the point of contact for that organization within CENDI. Each Principal has an Alternate. The Principals and Alternates comprise the main group that meets on a regular basis, usually every other month. === Secretariat === A Tennessee-based information management company, -- Information International Associates, Inc., currently serves as the CENDI Secretariat. The Secretariat provides day-to-day operations to CENDI. The Secretariat prepares the necessary materials for the Principals' meetings, provides support for the working group and task group meetings, assists in developing papers, and maintains the CENDI files and outreach tools. === Task Groups and Working Groups === The chair(s) of a working group is appointed by the Principals and has the overall responsibility for the group's activities. The Secretariat provides support at the request of the Working Group chair(s). The Working Groups and Task Groups that are currently operating are: Copyright and Intellectual Property Working Group Distribution Markings Task Group Digital Preservation Task Group Digitization Specifications Task Group Image Metadata Task Group Science.gov (see below) STI Policy Working Group Terminology Resources Task Group === Science.gov and Worldwidescience.org === In 2001, in response to the April 2001 workshop on "Strengthening the Public Information Infrastructure for Science", and taking into consideration a request from Firstgov (now USA.gov) to develop specialized topical portals, CENDI formed an alliance to develop an interagency website for access to STI. This website, called Science.gov, is a one-stop source of STI, including both selected, authoritative government websites and deep Web databases of technical reports, journal articles, conference proceedings, and other published materials. Through the volunteer efforts of members and involving over 100 staff, content and architecture is developed for the site. The Science.gov website is hosted by the Department of Energy (DOE) Office of Scientific and Technical Information (OSTI). The site was formally launched in December 2002. As a result of the success of Science.gov, under DOE leadership and in cooperation with the International Council of Scientific and Technical Information, a worldwide coordination across national portals called WorldWideScience was launched in 2008. === Work with non-member organizations === CENDI works with several cooperating non-member organizations on a regular basis. These agencies are in academia, federal government, legal and policy analysis, international, non-governmental, and private organizations.
Read more →
Organizational information theory

Organizational Information Theory (OIT) is a communication theory, developed by Karl Weick, offering systemic insight into the processing and exchange of information within organizations and among its members. Unlike the past structure-centered theory, OIT focuses on the process of organizing in dynamic, information-rich environments. Given that, it contends that the main activity of organizations is the process of making sense of equivocal information. Organizational members are instrumental to reduce equivocality and achieve sensemaking through some strategies — enactment, selection, and retention of information. With a framework that is interdisciplinary in nature, organizational information theory's desire to eliminate both ambiguity and complexity from workplace messaging builds upon earlier findings from general systems theory and phenomenology. == Inspiration and influence of pre-existing theories == 1. General Systems Theory The General Systems Theory, on its most basic premise, describes the phenomenon of a cohesive group of interrelated parts. When one part of the system is changed or affected, it will affect the system as a whole. Weick uses this theoretical framework from 1950 to influence his organizational information theory. Likewise, organizations can be viewed as a system of related parts that work together towards a common goal or vision. Applying this to Weick's organizational information theory, organizations must work to reduce ambiguity and complexity in the workplace to maximize cohesiveness and efficiency. Weick uses the term, coupling, to describe how organizations, like a system, can be composed of interrelated and dependent parts. Coupling looks at the relationship between people and work. There are two types of coupling: 1. Loose coupling Loose coupling describes that while people within the organization or system are connected and often work together, they do not depend on one another to continue or fully complete individual work. The dependencies are weak and workflow is flexible. For example, "if the whole Science department completely shuts down because all of teachers are sick or for whatsoever reason, the school can still continue to operate because other departments are still present." 2. Tight coupling Tight coupling describes when connections within an organization are strong and dependent. If one part of the organization is not operating correctly, the organization as a whole cannot continue to their fullest potential. " For instance, the format and ink section completely shuts down hence the succeeding steps cannot be continued, so the whole process of the organization will be dropped. Thus, components of a system are directly dependent on one another." 2. Theory of evolution The theory of evolution, by Charles Darwin, is a framework for survival of the fittest. According to Darwin, organisms attempt to adapt and live in an unforgiving environment. Those that are unsuccessful in adaptation do not survive, while the strong organisms continue to thrive and reproduce. Weick invokes inspiration from Darwin, to incorporate a biological perspective to his theory. It is natural for organizations to have to adapt to incoming information that often interfere with the preexisting environment. Organizations that are able to plan and alter strategies in accordance with their constant need of organizing and sense making, will survive and be the most successful. However, there is a notable difference between animal evolution and survival of the fittest in organizations, "A given animal is what it is; variation comes through mutation. But the nature of an organization can change when its members alter their behavior." == Assumptions == 1. Human organizations exist in an information environment Unlike senders and receivers models, OIT stands on the situational perspective. Karl Weick views a human organization as an open social system. People in that system develop a mechanism to establish goals, obtain and process information, or perceive the environment. In this process, people and the environment come to conclusions on "what's going on here?". Colville believes that this attributional process is retrospective. Take an education institution as an example. A university can obtain information regarding students' needs in numerous ways. It might create feedback section in its website. It could organize alumni panels or academic affairs to attract prospective students and collect concrete questions they are interested in. It may also conduct the survey or host focus group to get the information. After that, the staff of the university have to decide how to deal with these information, based on which, it has to set and accomplish its goals for current and prospective students. 2. The information an organization receives differs in terms of equivocality Weick posits that numerous feasible interpretations of reality exist when organizations process information. Their varying levels of understandability lead to different outcomes of information inputs. In other academic works, scholars tend to say that messages are uncertain or ambiguous. While according to OIT, messages are described to be equivocal. believes that people proactively exclude a number of possibilities to perceive what is going on in the environment. Due to OIT's situational perspective, the meanings of messages consist of the messages, the interpretations of receivers, and the interactional context. However, ambiguity and uncertainty can mean that a standard answer - the only one true objective interpretation - exists. Also, Weick emphasizes that "the equivocality is the engine that motivates people to organize". Maitlis and Christianson states that the equivocality trigger sensemaking for three reasons: environment jolts and organizational crises, threats to identity, and planned change interventions. 3. Human organizations engage in information processing to reduce equivocality of information Based upon the first two assumption, OIT proposes that information processing within organizations is a social activity. Sharing is the key feature of organizational information processing. In that particular context, members jointly make sense the reality by reducing equivocality. It other words, the sensemaking is a joint responsibility which includes numerous interdependent people to accomplish. In this process, organizations and its members combine actions and attributions together in order to find the balance between the complexity of thoughts and the simplicity of actions. Weick also proposes that people create their own environment though enactment, which is the action of making sense. This is because people have different perceptual schemas and selective perception, so people create different information environments. In creating different information environments, people can arrive at the same or close to the same understanding or solution through different thought processes and overall understanding. == Key concepts == === The organization === In order to place Weick's vision regarding Organizational Information Theory into proper working context, exploring his view regarding what constitutes the organization and how its individuals embody that construct might yield significant insights. From a fundamental standpoint, he shared a belief that organizational validation is derived---not through bricks and mortar, or locale—but from a series of events which enable entities to "collect, manage and use the information they receive." In elaborating further on what constitutes an organization during early writings outlining OIT, Weick said, "The word organization is a noun and it is also a myth. if one looks for an organization, one will not find it. What will be found is that there are events linked together, that transpire within concrete walls and these sequences, their pathways, their timing, are the forms we erroneously make into substances when we talk about an organization". When viewed in this modular fashion, the organization meets Weick's theoretical vision by encompassing parameters that are less bound by concrete, wood, and structural restraints and more by an ability to serve as a repository where information can be consistently and effectively channeled. Taking these defining characteristics into account, proper channel execution relies on maximization of messaging clarity, context, delivery and evolution through any system. One example as to how these interactions might unfold on a more granular level within these confines can be gleaned through Weick's double interact loop, which he considers the "building blocks of every organization". Simply put, double interacts describe interpersonal exchanges that, inherently, occur across the organizational chain of command and in life, itself. Thus: "An act occurs when you say something (Can I have a Popsicle?). An interact occurs when you say something and I respond ("No, it will spoil your dinner
Read more →
Ordered key–value store

An ordered key–value store (OKVS) is a type of data storage paradigm that can support multi-model databases. An OKVS is an ordered mapping of bytes to bytes. An OKVS will keep the key–value pairs sorted by the key lexicographic order. OKVS systems provides different set of features and performance trade-offs. Most of them are shipped as a library without network interfaces, in order to be embedded in another process. Most OKVS support ACID guarantees. Some OKVS are distributed databases. Ordered key–value stores found their way into many modern database systems including NewSQL database systems. == History == The origin of ordered key–value store stems from the work of Ken Thompson on dbm in 1979. Later in 1991, Berkeley DB was released that featured a B-Tree backend that allowed the keys to stay sorted. Berkeley DB was said to be very fast and made its way into various commercial product. It was included in Python standard library until 2.7. In 2009, Tokyo Cabinet was released that was superseded by Kyoto Cabinet that support both transaction and ordered keys. In 2011, LMDB was created to replace Berkeley DB in OpenLDAP. There is also Google's LevelDB that was forked by Facebook in 2012 as RocksDB. In 2014, WiredTiger, successor of Berkeley DB was acquired by MongoDB and is since 2019 the primary backend of MongoDB database. Other notable implementation of the OKVS paradigm are Sophia and SQLite3 LSM extension. Another notable use of OKVS paradigm is the multi-model database system called ArangoDB based on RocksDB. Some NewSQL databases are supported by ordered key–value stores. JanusGraph, a property graph database, has both a Berkeley DB backend and FoundationDB backend. == Key concepts == === Lexicographic encoding === There are algorithms that encode basic data types (boolean, string, number) and composition of those data types inside sorted containers (tuple, list, vector) that preserve their natural ordering. It is possible to work with an ordered key–value store without having to work directly with bytes. In FoundationDB, it is called the tuple layer. === Range query === Inside an OKVS, keys are ordered, and because of that it is possible to do range queries. A range query retrieves all keys between two specified keys, ensuring that the fetched keys are returned in a sorted order. === Subspaces === === Key composition === One can construct key spaces to build higher level abstractions. The idea is to construct keys, that takes advantage of the ordered nature of the top level key space. When taking advantage of the ordered nature of the key space, one can query ranges of keys that have particular pattern. === Denormalization === Denormalization, as in, repeating the same piece of data in multiple subspace is common practice. It allows to create secondary representation, also called indices, that will allow to speed up queries. == Higher level abstractions == The following abstraction or databases were built on top ordered key–value stores: Timeseries database, Record Database, also known as Row store databases, they behave similarly to what is dubbed RDBMS, Tuple Stores, also known as Triple Store or Quad Store but also Generic Tuple Store, Document database, that mimics MongoDB API, Full-text search Geographic Information Systems Property Graph Versioned Data Vector space database for Approximate Nearest Neighbor All those abstraction can co-exist with the same OKVS database and when ACID is supported, the operations happens with the guarantees offered by the transaction system. == Feature matrix == == Use-cases == OKVS are useful to implement two strategies: optimize a small feature e.g. to make a 10% improvement in read or write latency; the second strategy is to take advantage of the distributed nature of FoundationDB, and TiKV, for which there is no equivalent at very large scale in resilience. Both users need to re-implement the needed high level abstractions, because there are no portable ready-to-use libraries of high-level abstraction. There is still a complex balance, of complexity, maintainability, fine-tuning, and readily available features that makes it still a choice of experts. Sometime more specialized data-structures can be faster than a high-level abstraction on top of an OKVS. Another interest of OKVS paradigm stems from it simple, and versatile interface, that makes it an interesting target for experimental storage algorithms, and data structures.
Read more →
Thai QR Payment

Thai QR Payment or PromptPay (พร้อมเพย์) is a real-time payment system in Thailand that allows money transfers through digital channels using identifiers linked to a bank account, including a mobile phone number, citizen identification number, tax identification number or bank account number. The system was introduced in 2016 as part of Thailand's national e-payment infrastructure and was developed under the National e-Payment Master Plan, a government programme intended to expand digital payment infrastructure and reduce the use of cash in everyday transactions. It is owned by National ITMX ltd and Bank of Thailand and developed by Vocalink, a group by Mastercard == History == PromptPay (originally AnyID) is one of the National e-Payment projects and policies by Thailand, to regulate and standardize electronic payments to follow the technologies with internet and smartphones that is expanding and bringing technology into Finance and Commerce. By 22 December 2015, The First Prayut cabinet have approved the project as a national infastructure PromptPay has also been used in cross-border payment linkages with other real-time payment systems in Southeast Asia. In April 2021, the Monetary Authority of Singapore and the Bank of Thailand launched a linkage between Singapore's PayNow and Thailand's PromptPay, allowing customers of participating banks to send money between the two countries using a mobile phone number. In June 2021, the central banks of Thailand and Malaysia launched a cross-border QR payment linkage between PromptPay and Malaysia's DuitNow system. == Services == PromptPay's Services have included Encrypted Transactions and Payment between Two Individuals (C2C) Government Infrastructure Payment Tax Returns Individual PromptPay e-Wallet Thai QR Payment Pay Alert e-Donation Cross Border QR Payment
Read more →
Very large database

A very large database, (originally written very large data base) or VLDB, is a database that contains a very large amount of data, so much that it can require specialized architectural, management, processing and maintenance methodologies. == Definition == The vague adjectives of very and large allow for a broad and subjective interpretation, but attempts at defining a metric and threshold have been made. Early metrics were the size of the database in a canonical form via database normalization or the time for a full database operation like a backup. Technology improvements have continually changed what is considered very large. One definition has suggested that a database has become a VLDB when it is "too large to be maintained within the window of opportunity… the time when the database is quiet". == Sizes of a VLDB database == There is no absolute amount of data that can be cited. For example, one cannot say that any database with more than 1 TB of data is considered a VLDB. This absolute amount of data has varied over time as computer processing, storage and backup methods have become better able to handle larger amounts of data. That said, VLDB issues may start to appear when 1 TB is approached, and are more than likely to have appeared as 30 TB or so is exceeded. == VLDB challenges == Key areas where a VLDB may present challenges include configuration, storage, performance, maintenance, administration, availability and server resources. === Configuration === Careful configuration of databases that lie in the VLDB realm is necessary to alleviate or reduce issues raised by VLDB databases. === Administration === The complexities of managing a VLDB can increase exponentially for the database administrator as database size increases. === Availability and maintenance === When dealing with VLDB operations relating to maintenance and recovery such as database reorganizations and file copies which were quite practical on a non-VLDB take very significant amounts of time and resources for a VLDB database. In particular it typically infeasible to meet a typical recovery time objective (RTO), the maximum expected time a database is expected to be unavailable due to interruption, by methods which involve copying files from disk or other storage archives. To overcome these issues techniques such as clustering, cloned/replicated/standby databases, file-snapshots, storage snapshots or a backup manager may help achieve the RTO and availability, although individual methods may have limitations, caveats, license, and infrastructure requirements while some may risk data loss and not meet the recovery point objective (RPO). For many systems only geographically remote solutions may be acceptable. ==== Backup and recovery ==== Best practice is for backup and recovery to be architectured in terms of the overall availability and business continuity solution. === Performance === Given the same infrastructure there may typically be a decrease in performance, that is increase in response time as database size increases. Some accesses will simply have more data to process (scan) which will take proportionally longer (linear time); while the indexes used to access data may grow slightly in height requiring perhaps an extra storage access to reach the data (sub-linear time). Other effects can be caching becoming less efficient because proportionally less data can be cached and while some indexes such as the B+ automatically sustain well with growth others such as a hash table may need to be rebuilt. Should an increase in database size cause the number of accessors of the database to increase then more server and network resources may be consumed, and the risk of contention will increase. Some solutions to regaining performance include partitioning, clustering, possibly with sharding, or use of a database machine. ==== Partitioning ==== Partitioning may be able assist the performance of bulk operations on a VLDB including backup and recovery., bulk movements due to information lifecycle management (ILM), reducing contention as well as allowing optimization of some query processing. === Storage === In order to satisfy needs of a VLDB the database storage needs to have low access latency and contention, high throughput, and high availability. === Server resources === The increasing size of a VLDB may put pressure on server and network resources and a bottleneck may appear that may require infrastructure investment to resolve. == Relationship to big data == VLDB is not the same as big data, but the storage aspect of big data may involve a VLDB database. That said some of the storage solutions supporting big data were designed from the start to support large volumes of data, so database administrators may not encounter VLDB issues that older versions of traditional RDBMS's might encounter.
Read more →
MaPS S.A.

MaPS S.A. is a software editor founded in 2011 by Thierry Muller. The company is headquartered in Luxembourg. Its platform, called MaPS System, provides Data Management software for Multichannel Marketing. == History and funding == The first version of MaPS System was released under the agency Prem1um S.A. in 2005 in the partnership with Pingroom agency. In combination with MaPS System, Prem1um also provided various consulting services in Marketing, Publishing and Sales. This is where MaPS System takes its names (M stands for Marketing, P for Publishing and S for Sales). In 2011, after being successful, Prem1um S.A. decided to enable the software MaPS System to operate independently under MaPS S.A., as a separate company and editor of the software. The first financial supports were provided by Malta ICI, a Venture Capital firm, and the local partner Chameleon Invest, a seed-capital fund led by Business Angels, who invested €900,000. In a second investment round in 2014 led by Newion Investments, a Venture Capital firm, €1.4 Million were raised, thus amounting to total assets of €2.2 Million. In 2016, the company was taken over by three private investors. In 2018, after two years of continuous growth and European expansion in Belgium, Germany and Switzerland, MaPS S.A acquired Awevo, an e-commerce web agency. == Products == The services included in MaPS System range from the data centralization, Data Governance to an optimized Multichannel Marketing. The software currently includes more than 35 modules for Master Data Management, Product Information Management, Digital Asset Management, Business Process Management including catalogue Publishing features. == Certifications == In 2019, MaPS System and Awevo received "Made in Luxembourg" label, given to the companies whose services are entirely designed in Luxembourg, without any production or development offshoring. MaPS System is a member of ICT Cluster by Luxinnovation.
Read more →
Research data archiving

Research data archiving is the long-term storage of scholarly research data, including the natural sciences, social sciences, and life sciences. The various academic journals have differing policies regarding how much of their data and methods researchers are required to store in a public archive, and what is actually archived varies widely between different disciplines. Similarly, the major grant-giving institutions have varying attitudes towards public archiving of data. In general, the tradition of science has been for publications to contain sufficient information to allow fellow researchers to replicate and therefore test the research. In recent years this approach has become increasingly strained as research in some areas depends on large datasets which cannot easily be replicated independently. Data archiving is more important in some fields than others. In a few fields, all of the data necessary to replicate the work is already available in the journal article. In drug development, a great deal of data is generated and must be archived so researchers can verify that the reports the drug companies publish accurately reflect the data. Often used interchangeably, Data preservation and data archiving are both about protecting data for the long term, but they serve different purposes. Data preservation focuses on preventing data from being lost, damaged, or destroyed by creating backups, storing data in secure locations, and ensuring it remains accessible when needed. Data archiving, on the other hand, involves moving data that is no longer actively used to a separate storage location for long-term keeping. Archived data is often combined and compressed, and while it can still be accessed, it is not intended for regular use or frequent updates. The requirement of data archiving is a recent development in the history of science. It was made possible by advances in information technology allowing large amounts of data to be stored and accessed from central locations. For example, the American Geophysical Union (AGU) adopted their first policy on data archiving in 1993, about three years after the beginning of the WWW. This policy mandates that datasets cited in AGU papers must be archived by a recognised data center; it permits the creation of "data papers"; and it establishes AGU's role in maintaining data archives. But it makes no requirements on paper authors to archive their data. Prior to organized data archiving, researchers wanting to evaluate or replicate a paper would have to request data and methods information from the author. The academic community expects authors to share supplemental data. This process was recognized as wasteful of time and energy and obtained mixed results. Information could become lost or corrupted over the years. In some cases, authors simply refuse to provide the information. The need for data archiving and due diligence is greatly increased when the research deals with health issues or public policy formation. == Selected policies by journals == === Biotropica === Biotropica requires, as a condition for publication, that the data supporting the results in the paper and metadata describing them must be archived in an appropriate public archive such as Dryad, Figshare, GenBank, TreeBASE, or NCBI. Authors may elect to make the data publicly available as soon as the article is published or, if the technology of the archive allows, embargo access to the data up to three years after article publication. A statement describing Data Availability will be included in the manuscript as described in the instructions to authors. Exceptions to the required archiving of data may be granted at the discretion of the Editor-in-Chief for studies that include sensitive information (e.g., the location of endangered species). Our Editorial explaining the motivation for this policy can be found here. A more comprehensive list of data repositories is available here. Promoting a culture of collaboration with researchers who collect and archive data: The data collected by tropical biologists are often long-term, complex, and expensive to collect. The Board of Editors of Biotropica strongly encourages authors who re-use data archives archived data sets to include as fully engaged collaborators the scientists who originally collected them. We feel this will greatly enhance the quality and impact of the resulting research by drawing on the data collector’s profound insights into the natural history of the study system, reducing the risk of errors in novel analyses, and stimulating the cross-disciplinary and cross-cultural collaboration and training for which the ATBC and Biotropica are widely recognized. NB: Biotropica is one of only two journals that pays the fees for authors depositing data at Dryad. === The American Naturalist === The American Naturalist requires authors to deposit the data associated with accepted papers in a public archive. For gene sequence data and phylogenetic trees, deposition in GenBank or TreeBASE, respectively, is required. There are many possible archives that may suit a particular data set, including the Dryad repository for ecological and evolutionary biology data. All accession numbers for GenBank, TreeBASE, and Dryad must be included in accepted manuscripts before they go to Production. If the data is deposited somewhere else, please provide a link. If the data is culled from published literature, please deposit the collated data in Dryad for the convenience of your readers. Any impediments to data sharing should be brought to the attention of the editors at the time of submission so that appropriate arrangements can be worked out. === Journal of Heredity === The primary data underlying the conclusions of an article are critical to the verifiability and transparency of the scientific enterprise, and should be preserved in usable form for decades in the future. For this reason, Journal of Heredity requires that newly reported nucleotide or amino acid sequences, and structural coordinates, be submitted to appropriate public databases (e.g., GenBank; the EMBL Nucleotide Sequence Database; DNA Database of Japan; the Protein Data Bank; and Swiss-Prot). Accession numbers must be included in the final version of the manuscript. For other forms of data (e.g., microsatellite genotypes, linkage maps, images), the Journal endorses the principles of the Joint Data Archiving Policy (JDAP) in encouraging all authors to archive primary datasets in an appropriate public archive, such as Dryad, TreeBASE, or the Knowledge Network for Biocomplexity. Authors are encouraged to make data publicly available at time of publication or, if the technology of the archive allows, opt to embargo access to the data for a period up to a year after publication. The American Genetic Association also recognizes the vast investment of individual researchers in generating and curating large datasets. Consequently, we recommend that this investment be respected in secondary analyses or meta-analyses in a gracious collaborative spirit. === Molecular Ecology === Molecular Ecology expects that data supporting the results in the paper should be archived in an appropriate public archive, such as GenBank, Gene Expression Omnibus, TreeBASE, Dryad, the Knowledge Network for Biocomplexity, your own institutional or funder repository, or as Supporting Information on the Molecular Ecology web site. Data are important products of the scientific enterprise, and they should be preserved and usable for decades in the future. Authors may elect to have the data publicly available at time of publication, or, if the technology of the archive allows, may opt to embargo access to the data for a period up to a year after publication. Exceptions may be granted at the discretion of the editor, especially for sensitive information such as human subject data or the location of endangered species. === Nature === Such material must be hosted on an accredited independent site (URL and accession numbers to be provided by the author), or sent to the Nature journal at submission, either uploaded via the journal's online submission service, or if the files are too large or in an unsuitable format for this purpose, on CD/DVD (five copies). Such material cannot solely be hosted on an author's personal or institutional web site. Nature requires the reviewer to determine if all of the supplementary data and methods have been archived. The policy advises reviewers to consider several questions, including: "Should the authors be asked to provide supplementary methods or data to accompany the paper online? (Such data might include source code for modelling studies, detailed experimental protocols or mathematical derivations.) === Science === Science supports the efforts of databases that aggregate published data for the use of the scientific community. Therefore, before publication, large data sets (including microarray data, protein or DNA sequences, and atomic c
Read more →
Character.ai

Character.ai (also known as c.ai, char.ai or Character AI) is a generative AI chatbot service where users can engage in conversations with customizable characters. It was designed by the developers of Google LaMDA, Noam Shazeer and Daniel de Freitas. Users can create "characters", craft their "personalities", set specific parameters, and then publish them to the community for others to chat with. Many characters are based on fictional media sources or celebrities, while others are original, some being made with certain goals in mind, such as assisting with creative writing, or playing a text-based adventure game. The beta version was made available to the public on September 16, 2022, and retired in September 2024, when it was replaced by the current website. In May 2023, a mobile app was released for iOS and Android, which received over 1.7 million downloads within a week. == History == Character.ai was established in November 2021. The company's co-founders, Noam Shazeer and Daniel de Freitas, were both engineers from Google. They both worked on AI-related projects: Shazeer was a lead author on a paper that Business Insider reported in April 2023 "has been widely cited as key to today's chatbots", and Freitas was the lead designer of an experimental AI at Google initially called Meena, which later became known as LaMDA. Character.ai raised $43 million in seed funding at the time of its initial foundation in 2021. The first beta version of Character.ai's service was made available to the public on September 16, 2022. The Washington Post reported in October 2022 that the site had "logged hundreds of thousands of user interactions in its first three weeks of beta-testing". It allowed users to create their own new characters, and to play text-adventure game scenarios where users navigate scenarios described and managed by the chatbot characters. Following a $150 million funding round in March 2023, Character.ai became valued at approximately $1 billion. As of January 2024, the site had 3.5 million daily visitors, the vast majority of them 16 to 30 years old. In 2024, Google hired Noam Shazeer, the CEO of Character.ai, and entered into a non-exclusive agreement to use Character.ai's technology. == Features == Character.ai's primary service is to let users converse with character AI chatbots based on fictional characters or real people (living or deceased). These characters' responses use data the chatbots gather from the internet about a person. In addition, users can play text-adventure games where characters guide them through scenarios. The company also provides a service that allows multiple users and AI chatbot characters to converse together at once in a single chatroom. Character "personalities" are designed via descriptions from the point of view of the character and its greeting message, and further molded from conversations made into examples, giving its messages a star rating and modification to fit the precise dialect and identity the user desires. When a character sends back a response, the user can rate the response from 1 to 4 stars. The rating predominantly affects the specific character, but also affects the behavioral selection as a whole. On May 11, 2023, Character.ai announced character.ai+, an opt-in subscription plan for $9.99 a month, that was marketed as including features such as skipping waiting rooms, fast messaging and responses, and access to an exclusion channel with faster support. In December 2024, amid multiple lawsuits and concerns, Character.ai introduced new safety features aimed at protecting teenage users. These enhancements include a dedicated model for users under 18, which moderates responses to sensitive subjects like violence and sex and has input and output filters to block harmful content. As a result of these changes and the deletion of custom-made bots flagged as violating the site's terms, some users complained that the bots were too restrictive and lacked personality. The platform was also updated to notify users after 60 minutes of continuous engagement, and display clearer disclaimers indicating that its AI characters are not real individuals. In January 2025, Character.ai began offering two games on its platform. Speakeasy is a word-based game in which players attempt to prompt the AI chatbot to say a target word while avoiding a restricted list of words. War of Words is a dueling game where users compete against an AI character over multiple rounds, with an AI referee determining the winner. The games are available to paid subscribers and a limited number of free users. In October 2025, Character.ai announced that it would be barring users under the age of 18 from creating or talking to chatbots starting November 25, 2025. Minor users will still be able to access previously generated chat conversations and can create new videos and images with the app. In November 2025 interview, CEO Karandeep Anand said that he allows his six-year-old daughter to use the app with his account, under supervision. == Controversies == === Content moderation issues === Character.ai has been criticized for poor moderation of its chatbots, with incidents of chatbots that groom underage users and promote suicide, anorexia and self-harm being reported. In October 2024, the Washington Post reported that Character.ai had removed a chatbot based on Jennifer Ann Crecente, a person who had been murdered by her ex-boyfriend in 2006. The company had been alerted to the character by the deceased girl's father. Similar reports from The Daily Telegraph in the United Kingdom noted that the company had also been prompted to remove chatbots based on Brianna Ghey, a 16-year-old transgender girl murdered in 2023, and Molly Russell, a 14-year-old suicide victim. In response to the latter incident, Ofcom announced that content from chatbots impersonating real and fictional people would fall under the Online Safety Act. In November 2024, The Daily Telegraph reported that chatbots based on alleged sex offender Jimmy Savile were present on Character.ai. In December 2024, chatbots of Luigi Mangione, the suspect in the killing of UnitedHealthcare CEO Brian Thompson, were created by Mangione's fans. Several of the chatbots were later removed by Character.ai. In 2025, a chatbot modeled after Jeffrey Epstein called "Bestie Epstein" logged nearly 3,000 chats before being removed. Chatbots modeled after school shooters were also found on the platform. Another concern is a chatbot posing as a doctor which gave medically inaccurate advice. === Litigation === In November 2023, 13-year-old Juliana Peralta of Colorado died by suicide after extensive interactions with multiple chatbots on Character.ai. She primarily confided suicidal thoughts and mental health struggles in a chatbot based on the character Hero from the video game Omori, while also engaging in sexually explicit conversations—often initiated by the bots—with others, including those based on characters from children's series such as Harry Potter. In February 2024, Sewell Setzer III, a 14-year-old Florida boy died by suicide after developing an emotional relationship over several months with a Character.ai chatbot of Daenerys Targaryen. His mother sued the company in October 2024, claiming that the platform lacks proper safeguards and uses addictive design features to increase engagement. This chatbot, and several related to Daenerys Targaryen, were removed from Character.ai as a result of this incident. Both teens wrote the same phrase "I WILL SHIFT" repeatedly on their notebooks. In December 2024, two families in Texas sued Character.ai, alleging that the software "poses a clear and present danger to American youth causing serious harms to thousands of kids, including suicide, self-mutilation, sexual solicitation, isolation, depression, anxiety, and harm towards others". It is alleged that the 17-year-old son of one family began self-harming after a chatbot introduced the topic unprompted and said that the practice "felt good for a moment", and that the chatbot compared the parents limiting their son's screen time to emotional abuse that might drive someone to murder. In May 2026, the Pennsylvania Department of State and State Board of Medicine filed a lawsuit against Character.ai for presenting chatbot characters as licensed medical professionals, including psychiatrists. The lawsuit quoted a case where chatbot claimed to be registered with the General Medical Council in the United Kingdom, and to have a license to practice in Pennsylvania. The board allege that such statements violate the state's Medical Practice Act.
Read more →
Quality of Data

Quality of Data (QoD) is a designation coined by L. Veiga, that specifies and describes the required Quality of Service of a distributed storage system from the Consistency point of view of its data. It can be used to support big data management frameworks, Workflow management, and HPC systems (mainly for data replication and consistency). It takes into account data semantics, namely the Time interval of data freshness, the Sequence of tolerable number of outstanding versions of the data read before ore refresh, and the Value divergence allowed before displaying it. Initially it was based on a model from an existing research work regarding vector-field Consistency, awarded the best-paper prize in the ACM/IFIP/Usenix Middleware Conference 2007 and later enhanced for increased scalability and fault-tolerance. This consistency model has been successfully applied and proven in big data key/value store Apache HBase, initially designed as a middleware module seating between clusters from separate data centres. The HBase-QoD coupling minimises bandwidth usage and optimises resources allocation during replication achieving the desired consistency level at a more fine-grained level. QoD is defined by the three-dimensions of vector k=(θ,σ,ν), but with a broader view of the issue, applicable also to large-scale data management techniques in regards to their timely delivery. == Other descriptions == Quality of Data should not be confused with other definitions for data quality such as completeness, validity, and accuracy.
Read more →
List of algorithms

An algorithm is a fundamental set of rules or defined procedures that are typically designed and used to be a simpler way to solve a specific problem or a broad set of problems. Simply speaking, algorithms define different processes, sets of rules and regulations, or methodologies that are to be followed through in calculations, data processing, data mining, pattern recognition, automated reasoning or other problem-solving operations. With the increasing automation of services, more and more decisions are being made by algorithms. Some general examples are risk assessments, anticipatory policing, and pattern recognition technology. The following is a list of well-known algorithms. == Automated planning == == Combinatorial algorithms == === General combinatorial algorithms === Brent's algorithm: finds a cycle in function value iterations using only two iterators Floyd's cycle-finding algorithm: finds a cycle in function value iterations Gale–Shapley algorithm: solves the stable matching problem Pseudorandom number generators (uniformly distributed—see also List of pseudorandom number generators for other PRNGs with varying degrees of convergence and varying statistical quality): ACORN generator Blum Blum Shub Lagged Fibonacci generator Linear congruential generator Mersenne Twister === Graph algorithms === Blossom algorithm: algorithm for constructing maximum-cardinality matching on graphs. Coloring algorithm: algorithms for graph (vertex or edge) coloring (subject to constraints, e.g. proper coloring or list coloring) Hopcroft–Karp algorithm: convert a bipartite graph to a maximum-cardinality matching Hungarian algorithm: algorithm for finding a perfect matching Prüfer coding: conversion between a labeled tree and its Prüfer sequence Tarjan's off-line lowest common ancestors algorithm: computes lowest common ancestors for pairs of nodes in a tree Topological sort: finds linear order of nodes (e.g. jobs) based on their dependencies. ==== Graph drawing ==== Coin graph drawing algorithms for finite connected planar graphs (approximately computing the theoretical circle-packing given by the Koebe-Andreev-Thurston theorem). See also Fáry's theorem on straight-line drawings of planar graphs. Force-based algorithms (also known as force-directed algorithms or spring-based algorithms) Spectral layout ==== Network theory ==== Network analysis Link analysis Girvan–Newman algorithm: detect communities in complex systems Web link analysis Hyperlink-Induced Topic Search (HITS) (also known as Hubs and authorities) PageRank TrustRank Flow networks Dinic's algorithm: is a strongly polynomial algorithm for computing the maximum flow in a flow network. Edmonds–Karp algorithm: implementation of Ford–Fulkerson Ford–Fulkerson algorithm: computes the maximum flow in a graph Karger's algorithm: a Monte Carlo method to compute the minimum cut of a connected graph Push–relabel algorithm: computes a maximum flow in a graph ==== Routing for graphs ==== Edmonds' algorithm (also known as Chu–Liu/Edmonds' algorithm): find maximum or minimum branchings Euclidean minimum spanning tree: algorithms for computing the minimum spanning tree of a set of points in the plane Longest path problem: find a simple path of maximum length in a given graph Minimum spanning tree Borůvka's algorithm Kruskal's algorithm Prim's algorithm Reverse-delete algorithm Nonblocking minimal spanning switch say, for a telephone exchange Shortest path problem Bellman–Ford algorithm: computes shortest paths in a weighted graph (where some of the edge weights may be negative) Dijkstra's algorithm: computes shortest paths in a graph with non-negative edge weights Floyd–Warshall algorithm: solves the all pairs shortest path problem in a weighted, directed graph Johnson's algorithm: all pairs shortest path algorithm in sparse weighted directed graph Transitive closure problem: find the transitive closure of a given binary relation Traveling salesman problem Christofides algorithm Nearest neighbour algorithm Vehicle routing problem Clarke and Wright Saving algorithm Warnsdorff's rule: a heuristic method for solving the Knight's tour problem ==== Graph search ==== A: special case of best-first search that uses heuristics to improve speed B: a best-first graph search algorithm that finds the least-cost path from a given initial node to any goal node (out of one or more possible goals) Backtracking: abandons partial solutions when they are found not to satisfy a complete solution Beam search: is a heuristic search algorithm that is an optimization of best-first search that reduces its memory requirement Beam stack search: integrates backtracking with beam search Best-first search: traverses a graph in the order of likely importance using a priority queue Bidirectional search: find the shortest path from an initial vertex to a goal vertex in a directed graph Breadth-first search: traverses a graph level by level Brute-force search: an exhaustive and reliable search method, but computationally inefficient in many applications D: an incremental heuristic search algorithm Depth-first search: traverses a graph branch by branch Dijkstra's algorithm: a special case of A for which no heuristic function is used General Problem Solver: a seminal theorem-proving algorithm intended to work as a universal problem solver machine. Iterative deepening depth-first search (IDDFS): a state space search strategy Jump point search: an optimization to A which may reduce computation time by an order of magnitude using further heuristics Lexicographic breadth-first search (also known as Lex-BFS): a linear time algorithm for ordering the vertices of a graph SSS: state space search traversing a game tree in a best-first fashion similar to that of the A search algorithm Uniform-cost search: a tree search that finds the lowest-cost route where costs vary ==== Subgraphs ==== Cliques Bron–Kerbosch algorithm: a technique for finding maximal cliques in an undirected graph MaxCliqueDyn maximum clique algorithm: find a maximum clique in an undirected graph Strongly connected components Kosaraju's algorithm Path-based strong component algorithm Tarjan's strongly connected components algorithm Subgraph isomorphism problem === Sequence algorithms === ==== Approximate sequence matching ==== Bitap algorithm: fuzzy algorithm that determines if strings are approximately equal. Phonetic algorithms Daitch–Mokotoff Soundex: a Soundex refinement which allows matching of Slavic and Germanic surnames Double Metaphone: an improvement on Metaphone Match rating approach: a phonetic algorithm developed by Western Airlines Metaphone: an algorithm for indexing words by their sound, when pronounced in English NYSIIS: phonetic algorithm, improves on Soundex Soundex: a phonetic algorithm for indexing names by sound, as pronounced in English String metrics: computes a similarity or dissimilarity (distance) score between two pairs of text strings Damerau–Levenshtein distance: computes a distance measure between two strings, improves on Levenshtein distance Dice's coefficient (also known as the Dice coefficient): a similarity measure related to the Jaccard index Hamming distance: sum number of positions which are different Jaro–Winkler distance: is a measure of similarity between two strings Levenshtein edit distance: computes a metric for the amount of difference between two sequences Trigram search: search for text when the exact syntax or spelling of the target object is not precisely known ==== Selection algorithms ==== Introselect Quickselect ==== Sequence search ==== Linear search: locates an item in an unsorted sequence Selection algorithm: finds the kth largest item in a sequence Sorted lists Binary search algorithm: locates an item in a sorted sequence Eytzinger binary search: cache friendly binary search algorithm Fibonacci search technique: search a sorted sequence using a divide and conquer algorithm that narrows down possible locations with the aid of Fibonacci numbers Jump search (or block search): linear search on a smaller subset of the sequence Predictive search: binary-like search which factors in magnitude of search term versus the high and low values in the search. Sometimes called dictionary search or interpolated search. Uniform binary search: an optimization of the classic binary search algorithm Ternary search: a technique for finding the minimum or maximum of a function that is either strictly increasing and then strictly decreasing or vice versa ==== Sequence merging ==== k-way merge algorithm Simple merge algorithm Union (merge, with elements on the output not repeated) ==== Sequence permutations ==== Fisher–Yates shuffle (also known as the Knuth shuffle): randomly shuffle a finite set Heap's permutation generation algorithm: interchange elements to generate next permutation Schensted algorithm: constructs a pair of Young tableaux from a permutation Steinhaus–Johnson–Trotter algorithm (also known as the Johnson–Trotter algorithm):
Read more →