Best AI Writing Tools

Best AI Writing Tools — hands-on reviews, top picks, pricing, pros and cons and a practical how-to guide on Aizhi.

  • Spreading activation

    Spreading activation

    Spreading activation is a method for searching associative networks, biological and artificial neural networks, or semantic networks. The search process is initiated by labeling a set of source nodes (e.g. concepts in a semantic network) with weights or "activation" and then iteratively propagating or "spreading" that activation out to other nodes linked to the source nodes. Most often these "weights" are real values that decay as activation propagates through the network. When the weights are discrete this process is often referred to as marker passing. Activation may originate from alternate paths, identified by distinct markers, and terminate when two alternate paths reach the same node. However brain studies show that several different brain areas play an important role in semantic processing. Spreading activation in semantic networks as a model were invented in cognitive psychology to model the fan out effect. Spreading activation can also be applied in information retrieval, by means of a network of nodes representing documents and terms contained in those documents. == Cognitive psychology == As it relates to cognitive psychology, spreading activation is the theory of how the brain iterates through a network of associated ideas to retrieve specific information. The spreading activation theory presents the array of concepts within our memory as cognitive units, each consisting of a node and its associated elements or characteristics, all connected together by edges. A spreading activation network can be represented schematically, in a sort of web diagram with shorter lines between two nodes meaning the ideas are more closely related and will typically be associated more quickly to the original concept. In memory psychology, the spreading activation model holds that people organize their knowledge of the world based on their personal experiences, which in turn form the network of ideas that is the person's knowledge of the world. When a word (the target) is preceded by an associated word (the prime) in word recognition tasks, participants seem to perform better in the amount of time that it takes them to respond. For instance, subjects respond faster to the word "doctor" when it is preceded by "nurse" than when it is preceded by an unrelated word like "carrot". This semantic priming effect with words that are close in meaning within the cognitive network has been seen in a wide range of tasks given by experimenters, ranging from sentence verification to lexical decision and naming. As another example, if the original concept is "red" and the concept "vehicles" is primed, they are much more likely to say "fire engine" instead of something unrelated to vehicles, such as "cherries". If instead "fruits" was primed, they would likely name "cherries" and continue on from there. The activation of pathways in the network has everything to do with how closely linked two concepts are by meaning, as well as how a subject is primed. == Algorithm == A directed graph is populated by Nodes[ 1...N ] each having an associated activation value A [ i ] which is a real number in the range [0.0 ... 1.0]. A Link[ i, j ] connects source node[ i ] with target node[ j ]. Each edge has an associated weight W [ i, j ] usually a real number in the range [0.0 ... 1.0]. Parameters: Firing threshold F, a real number in the range [0.0 ... 1.0] Decay factor D, a real number in the range [0.0 ... 1.0] Steps: Initialize the graph setting all activation values A [ i ] to zero. Set one or more origin nodes to an initial activation value greater than the firing threshold F. A typical initial value is 1.0. For each unfired node [ i ] in the graph having an activation value A [ i ] greater than the node firing threshold F: For each Link [ i, j ] connecting the source node [ i ] with target node [ j ], adjust A [ j ] = A [ j ] + (A [ i ] W [ i, j ] D) where D is the decay factor. If a target node receives an adjustment to its activation value so that it would exceed 1.0, then set its new activation value to 1.0. Likewise maintain 0.0 as a lower bound on the target node's activation value should it receive an adjustment to below 0.0. Once a node has fired it may not fire again, although variations of the basic algorithm permit repeated firings and loops through the graph. Nodes receiving a new activation value that exceeds the firing threshold F are marked for firing on the next spreading activation cycle. If activation originates from more than one node, a variation of the algorithm permits marker passing to distinguish the paths by which activation is spread over the graph The procedure terminates when either there are no more nodes to fire or in the case of marker passing from multiple origins, when a node is reached from more than one path. Variations of the algorithm that permit repeated node firings and activation loops in the graph, terminate after a steady activation state, with respect to some delta, is reached, or when a maximum number of iterations is exceeded. == Examples ==

    Read more →
  • Tumblr

    Tumblr

    Tumblr ( TUM-blər) is a microblogging and social media platform founded by David Karp in 2007 and operated by American company Tumblr, Inc., a subsidiary of Automattic. The service allows users to post multimedia and other content to a short-form blog. It has attracted significant attention and controversy for hosting a wide range of progressive user-generated content. == History == === Beginnings (2006–2012) === Development of Tumblr began in 2006 during a two-week gap between contracts at David Karp's software consulting company, Davidville. Karp had been interested in tumblelogs (short-form blogs, hence the name Tumblr) for some time and was waiting for one of the established blogging platforms to introduce their own tumblelogging platform. As none had done so after a year of waiting, Karp and developer Marco Arment began working on their own platform. Tumblr was launched in February 2007, and within two weeks had gained 75,000 users. Arment left the company in September 2010 to work on Instapaper. In June 2012, Tumblr featured its first major brand advertising campaign in collaboration with Adidas, who launched an official soccer Tumblr blog and bought ad placements on the user dashboard. This launch came only two months after Tumblr announced it would be moving towards paid advertising on its site. === Ownership by Yahoo! (2013–2018) === On May 20, 2013, it was announced that Yahoo and Tumblr had reached an agreement for Yahoo! Inc. to acquire Tumblr for $1.1 billion in cash. Many of Tumblr's users were unhappy with the news, causing some to start a petition, achieving nearly 170,000 signatures. David Karp remained CEO and the deal was finalized on June 20, 2013. Advertising sales goals were not met and in 2016 Yahoo wrote down $712 million of Tumblr's value. Verizon Communications acquired Yahoo in June 2017, and placed Yahoo and Tumblr under its Oath subsidiary. Karp announced in November 2017 that he would be leaving Tumblr by the end of the year. Jeff D'Onofrio, Tumblr's president and COO, took over leading the company. The site, along with the rest of the Oath division (renamed Verizon Media Group in 2019), continued to struggle under Verizon. In March 2019, Similarweb estimated Tumblr had lost 30% of its user traffic since December 2018, when the site had introduced a stricter content policy with heavier restrictions on adult content (which had been a notable draw to the service). In May 2019, it was reported that Verizon was considering selling the site due to its continued struggles since the purchase (as it had done with another Yahoo property, Flickr, via its sale to SmugMug). Following this news, Pornhub's vice president publicly expressed interest in purchasing Tumblr, with a promise to reinstate the previous adult content policies. === Automattic (2019–present) === On August 12, 2019, Verizon Media announced that it would sell Tumblr to Automattic, the operator of blog service WordPress.com and corporate backer of the open source blog software of the same name. The sale was for an undisclosed amount, but Axios reported that the sale price was less than $3 million, less than 0.3% of Yahoo's original purchase price. Automattic CEO Matt Mullenweg stated that the site will operate as a complementary service to WordPress.com, and that there were no plans to reverse the content policy decisions made during Verizon ownership. In November 2022, Mullenweg stated that Tumblr will add support for the decentralized social networking protocol ActivityPub. In November 2023, most of Tumblr's product development and marketing teams were transferred to other groups within Automattic. Mullenweg stated that focus would shift to core functionality and streamlining existing features. In February 2024, Automattic announced that it would begin selling user data from Tumblr and WordPress.com to Midjourney and OpenAI. Tumblr users are opted-in by default, with an option to opt out. In August 2024, Automattic announced that it would migrate Tumblr's backend to an architecture derived from WordPress, in order to ease development and code sharing between the platforms. The company stated that this migration would not impact the service's user experience and content, and that users "won't even notice a difference from the outside". In January 2025, Mullenweg stated that the migration, once completed, would also "unlock" ActivityPub access for Tumblr, including native support for the company's official ActivityPub plugin for WordPress. In April 2025, Automattic announced layoffs for 16% of its workforce, reducing a large portion of Tumblr staff. On March 16, 2026, Tumblr implemented a change to how notes were assigned to reblogs, making it more similar to sites like Twitter and Bluesky. The change was rolled back the next day after heavy user backlash. == Features == === Blog management === Dashboard: The dashboard is the primary tool for the typical Tumblr user. It is a live feed of recent posts from blogs that they follow. Through the dashboard, users are able to comment, reblog, and like posts from other blogs that appear on their dashboard. The dashboard allows the user to upload text posts, images, videos, quotes, or links to their blog with a click of a button displayed at the top of the dashboard. Users are also able to connect their blogs to their Twitter and Facebook accounts, so that whenever they make a post, it will also be sent as a tweet and a status update. As of June 2022, users can also turn off reblogs on specific posts through the dashboard. Queue: Users are able to set up a schedule to delay posts that they make. They can spread their posts over several hours or even days. Tags: Users can help their audience find posts about certain topics by adding tags. If someone were to upload a picture to their blog and wanted their viewers to find pictures, they would add the tag #picture, and their viewers could use that word to search for posts with the tag #picture. HTML editing: Tumblr allows users to edit their blog's theme using HTML to control the appearance of their blog. Custom themes are able to be shared and used by other users, or sold. Custom domains: Tumblr allows users to use custom domains for their blogs. Users must purchase a domain from Tumblr Domains, an in-house registrar that provides domains that can only be used with Tumblr unless removed from the user's blog and transferred to another registrar. Blogs previously were able to be linked with any domain/subdomain from any registrar, however following the introduction of the Tumblr Domains service, now requires you to purchase a domain directly from Tumblr to be used with a blog. Users who kept their blogs connected to a domain after the introduction got to keep their custom domain, as long as they do not disconnect it from Tumblr or let the domain expire. === Tags === The tagging system on the website operates on a hybrid tagging system, involving both self-tagging (user write their own tags on their posts) and an auto-manual function (the website will recommend popular tags and ones that the user has used before.) Only the first 20 tags added to any post will be indexed by the site. The tags are prefaced by a hashtag and separated by commas, and spaces and special characters are allowed, but only up to 140 characters total per tag. There are two main types used by Tumblr users: descriptive tagging, and opinion or commentary tagging. Descriptive tags are usually introduced by the original poster, and describe what is in the post (e.g. #art, #sky). These are important for the original poster to use, so their post will be indexed and searchable by others wishing to view that subject of content. Tags used as a form of communication are unique to Tumblr, and are typically more personal, expressing opinions, reactions, meta-commentary, background information, and more. Instead of adding onto the reblogged post (with their comments becoming an addition to each subsequent reblog from them) a user may add their comments in the tags, not changing the content or appearance of the original post in any way. Not all users choose to use tags this way, but those who do use tags for commentary may prefer it over adding a comment on the actual post. === Mobile === With Tumblr's 2009 acquisition of Tumblerette, an iOS application created by Jeff Rock and Garrett Ross, the service launched its official iPhone app. The site became available to BlackBerry smartphones on April 17, 2010, via a Mobelux application in BlackBerry World. In June 2012, Tumblr released a new version of its iOS app, Tumblr 3.0, allowing support for Spotify integration, hi-res images and offline access. An app for Android is also available. A Windows Phone app was released on April 23, 2013. An app for Google Glass was released on May 16, 2013. === Inbox and messaging === Tumblr blogs have the option to allow users to submit questions, either as themselves or anonymously, to the blog for a response. Tumblr

    Read more →
  • Social media use by businesses

    Social media use by businesses

    Social media use by businesses includes a range of applications. Although social media accessed via desktop computers offer an online shopping variety of opportunities for companies in a wide range of business sectors, mobile social media, which users can access when they are "on the go" via tablet computers or smartphones, benefit companies because of the location- and time-sensitive awareness of their users. Mobile social media tools can be used for marketing research, communication, sales promotions/discounts, informal employee learning/organizational development, relationship development/loyalty programs, and e-commerce. Marketing research: Mobile social media applications provide companies data about offline consumer movements at a level of detail that was previously accessible to online companies only. These applications allow any business to know the exact time a customer who uses social media entered one of its locations, as well as know the social media comments made during the visit. Communication: Mobile social media communication takes two forms: company-to-consumer (in which a company may establish a connection to a consumer based on its location and provide reviews about locations nearby) and user-generated content. For example, McDonald's offered $5 and $10 gift-cards to 100 users randomly selected among those checking in at one of its restaurants. This promotion increased check-ins by 33% (from 2,146 to 2,865), resulted in over 50 articles and blog posts, and prompted several hundred thousand news feeds and Twitter messages. Sales promotions and discounts: Although customers have had to use printed coupons in the past, mobile social media allows companies to tailor promotions to specific users at specific times. For example, when launching its California-Cancun service, Virgin America offered users who checked in through Loopt at one of three designated taco trucks in San Francisco or Los Angeles between 11 a.m. and 3 p.m. on 31 August 2010, two tacos for $1 and two flights to Cancun or Cabo for the price of one. This special promotion was only available to people who were at a certain location at a certain time. Relationship development and loyalty programs: In order to increase long-term relationships with customers, companies can develop loyalty programs that allow customers who check-in via social media regularly at a location to earn discounts or perks. For example, American Eagle Outfitters remunerates such customers with a tiered 10%, 15%, or 20% discount on their total purchase. Informal employee learning/organizational development is facilitated by social media. Technologies such as blogs, wiki pages, web forums, social networks and other social media act as technology enhanced learning (TEL) tools, and their users perceive change in organizational structure, culture and knowledge management. The prerequisite for the successful use of social media are motivated employees who want to use the new technologies. It is central for companies to understand the factors that determine the willingness to use social media. Customer service and support: A company can gain cost savings and increase revenue and customer satisfaction by using social media platforms in customer service and support. By using social media tools, company's have easy and widescale contact to its customers and simultaneously increase their brand knowledge. E-commerce: Social media sites are increasingly implementing marketing-friendly strategies, creating platforms that are mutually beneficial for users, businesses, and the networks themselves in the popularity and accessibility of e-commerce, or online purchases. The user who posts their comments about a company's product or service benefits because they are able to share their views with their online friends and acquaintances. The company benefits because it obtains insight (positive or negative) about how their product or service is viewed by consumers. Mobile social media applications such as Amazon.com and Pinterest have started to influence an upward trend in the popularity and accessibility of e-commerce. E-commerce businesses may refer to social media as consumer-generated media (CGM). A common thread running through all definitions of social media is a blending of technology and social interaction for the co-creation of value for the business or organization that is using it. People obtain valuable information, education, news, and other data from electronic and print media. Social media are distinct from industrial and traditional media such as newspapers, magazines, television, and film as they are comparatively inexpensive marketing tools and are highly accessible. They enable anyone, including private individuals, to publish or access information easily. Industrial media generally require significant resources to publish information, and in most cases the articles go through many revisions before being published. This process adds to the cost and the resulting market price. Originally social media was only used by individuals, but now it is used by both businesses and nonprofit organizations and also in government and politics. One characteristic shared by both social and industrial media is the capability to reach small or large audiences; for example, either a blog post or a television show may reach no people or millions of people. Some of the properties that help describe the differences between social and industrial media are: Quality: In industrial (traditional) publishing—mediated by a publisher—the typical range of quality is substantially narrower (skewing to the high quality side) than in niche, unmediated markets like user-generated social media posts. The main challenge posed by the content in social media sites is the fact that the distribution of quality has high variance: from very high-quality items to low-quality, sometimes even abusive or inappropriate content. Reach: Both industrial and social media technologies provide scale and are capable of reaching a global audience. Industrial media, however, typically use a centralized framework for organization, production, and dissemination, whereas social media are by their very nature more decentralized, less hierarchical, and distinguished by multiple points of production and utility. Frequency: The number of times users access a type of media per day. Heavy social media users, such as young people, check their social media account numerous times throughout the day. Accessibility: The means of production for industrial media are typically government or corporate (privately owned); social media tools are generally available to the public at little or no cost, or they are supported by advertising revenue. While social media tools are available to anyone with access to Internet and a computer or mobile device, due to the digital divide, the poorest segment of the population lacks access to the Internet and computer. Low-income people may have more access to traditional media (TV, radio, etc.), as an inexpensive TV and aerial or radio costs much less than an inexpensive computer or mobile device. Moreover, in many regions, TV or radio owners can tune into free over the air programming; computer or mobile device owners need Internet access to go to social media sites. Usability: Industrial media production typically requires specialized skills and training. For example, in the 1970s, to record a pop song, an aspiring singer would have to rent time in an expensive professional recording studio and hire an audio engineer. Conversely, most social media activities, such as posting a video of oneself singing a song require only modest reinterpretation of existing skills (assuming a person understands Web 2.0 technologies); in theory, anyone with access to the Internet can operate the means of social media production, and post digital pictures, videos or text online. Immediacy: The time lag between communications produced by industrial media can be long (days, weeks, or even months, by the time the content has been reviewed by various editors and fact checkers) compared to social media (which can be capable of virtually instantaneous responses). The immediacy of social media can be seen as a strength, in that it enables regular people to instantly communicate their opinions and information. At the same time, the immediacy of social media can also be seen as a weakness, as the lack of fact checking and editorial "gatekeepers" facilitates the circulation of hoaxes and fake news. Permanence: Industrial media, once created, cannot be altered (e.g., once a magazine article or paper book is printed and distributed, changes cannot be made to that same article in that print run) whereas social media posts can be altered almost instantaneously, when the user decides to edit their post or due to comments from other readers. Community media constitute a hybrid of industrial and social media. Though community-owned, some community radio,

    Read more →
  • Social media coverage of the Olympics

    Social media coverage of the Olympics

    Over the years, television broadcast rights have distinguished what Olympic-related content can be accessed by fans online. By doing so, mobile-friendly social platforms began to integrate into the Olympics. Athletes and fans use these platforms to share live updates, special moments, and behind-the-scenes specials. Various social media platforms have been used for Olympic content, including Twitter and Facebook. Some marketers credit social media for prompting the official U.S. broadcasters, NBC, to live stream events, including early rounds. == Background == The Olympics is able to advertise to its viewers and its host country with the use of data it collects through Social media marketing. Prominent social media platforms include: Twitter, Facebook, Instagram, Tumblr, YouTube, Google, MSN, Yahoo and many more. Campaign Initiatives and Artificial Intelligence technologies have been used to analyze the social media content of users. Information from consumers such as their preferences, demographics, age and locality are all analyzed to gain consumer insight. Campaign initiatives and AI technologies were used for such purposes in the 2010 Vancouver Winter Olympics and are in use currently. Social media marketing of the Olympics is a new phenomena, beginning prior to the 2008 Beijing Olympics == Variations == There are two classifications of social media marketing recognized by the IOC: Officially sanctioned content from rights holders and sponsors that maximizes the use of Olympic content (imagery, hashtag) Unofficial content that is generated by brands that leverage the excitement of the Olympics == 2008 Beijing Summer Olympics == Social media marketing emerged as a phenomenon during the 2008 Beijing Olympics, which progressed as a marketing and an advertising tactic ever since. The Beijing Olympics became the test subject for social media marketing initiatives started by advertising agencies. In 2008, social media marketing began the transition from one-sided communication to mass communication of the Olympic Games. Although social media marketing of the Olympic Games began in 2008, the audience to the Olympics was still primarily reached through television–reaching an audience of 4.3 billion viewers. At the time, the viewers of the Olympic Games through Internet website platforms made up an audience of approximately 390 million individuals. What was the beginning of Olympic social media marketing, was also the beginning of a more globalized experience of the Olympic Games via social media. Twitter, now a prominent social media platform, began in 2006 and grew to three million active users by the beginning of the 2008 Beijing Olympics. Members of Facebook, another prominent social media platform, tracking the Olympic Games grew from approximately one million during the Olympic Games of Athens 2004 to 90 million during the 2008 Beijing Olympics. Social media use, in general, increased by 24 percent between 2007 and 2008–from 63 percent of U.S. adults to 87 percent of U.S. adults. == 2010 Vancouver Winter Olympics == The International Olympic Committee (IOC) deemed The Vancouver Winter Olympics as "the first social media games” based on its fan base through social media platforms. The IOC launched their Facebook page a month before the games began, attracting 1.5 million fans. Shifting to online viewing attracted a younger audience than past Olympic games with over 60 percent of Facebook fans being under 24 years of age. Athletes like Lindsey Vonn and Shaun White reached fans on social media as the platform posted behind-the-scenes coverage on their experiences. The IOC used social media to create competitions between athletes and fans streamed online. Its YouTube channel hosted a “Best of Us” challenge in which the public could compete in games with their favorite athletes, acquiring three million viewers. Photos spread across social media platforms, such as Flickr, which had 11,000 photos posted by 600 photographers, bringing a new perspective to the games. Twitter contributed constant live updates of the competitions. The IOC's Twitter following doubled to 12,000 followers during the Vancouver Olympics, creating a larger viewer population for the games. The IOC created social media guidelines as more athletes and fans got online to interact with the Olympics. Social media was still relatively new as a marketing platform, so these guidelines confused many individuals. == 2012 London Summer Olympics == The London 2012 Olympic Games succeeded in broadcasting, participation and marketing. For the first time, the IOC broadcast the Olympic Games live and on-demand through YouTube, allowing fans to access the Games anytime, anywhere through live streaming. The combination of conventional broadcasting and mobile platforms reached a global audience of 4.8 billion people. Social media soared with Facebook, Twitter and Google+, attracting 4.7 million followers. Athletes shared photographs, interacted online with fans and updated daily, either in person or via an agent. Instagram was established by 2012, making itself a premier photo-sharing platform perfect for athletes to capture their emotions. Lewis Wiltshire, head of sport for Twitter UK said, "Never before have fans had such direct access to their sporting heroes." Social media created conversation on fan opinions regarding athletes, including 962,756 total mentions of Usain Bolt, “Fastest Man in History,” who defended the 100 meter and 200 meter gold medals. Michael Phelps followed with 828,081 total mentions. Olympic sponsors were active on social media; created several campaigns to promote their brands; and inspired viewers with mass participation and personalized events. The Adidas “Take the Stage” Campaign recognized talent around the world, installing a photo booth and inviting the 550 Olympics athletes to take the stage. (IOC Marketing Report 2012). David Beckham surprised fans at the photo booth in Westfield shopping centre, gaining popularity in UK media. Coca-Cola, Acer Inc., McDonald's, Visa Inc. and several others used similar tactics of participation to attract viewers. == 2014 Sochi Winter Olympics == === Channels === The 2014 Winter Olympic Games were held in Sochi, a city in Krasnodar Krai, Russia, establishing the first “social media Olympics” for Russia. The most popular Russian social media and networking service, VK, created an Olympic page, similar to Facebook's. The Olympic VK page has 2.8 million fans and—the most popular official community on the platform. Throughout the games, VK had 54 million Olympic mentions, an average of 1.5 million per day. Numbers grew on other social media pages: more than 2 million fans joined the Olympic Facebook page, 168,101 followed the Olympic Twitter, 150,000 followed the Olympic Instagram and three million visited the Olympic website in February 2014. There were 90,000 total updates on social media by Sochi 2014 Olympians and teams. The United States was the most active country during the games logging 22,598 posts across Facebook, Twitter, and Instagram. === Engagement === With social media there is also hashtags. The most popular hashtag was #sochi2014 with almost 11,000 uses. The next top five hashtags were #wearewinter, #teamusa, #olympics, #goaus and #wirfuerD. Another popular hashtag was #Sochiproblems, depicting local struggles. Photos of the poor state of Sochi on all platforms made the games the number one trending topic one week before the opening ceremony. #SochiFail and #SochiProblems gave multiple reports of the poor living arrangements, incomplete construction, broken elevators, and polluted waters. This was one way that social media provided awareness to its users. === Media Perceptions === Media perceptions varied during the games; the Olympics was viewed as a confrontation between Eastern and Western Civilizations. The LGBT community took a stand against the games. Sponsors for the games including Coca-Cola, Mcdonald's, and P&G protested against Russian authorities and Russian anti-LGBT laws. Many protests took a stand against Russian laws, which created a discussion between human rights advocates. Advocates believed organizations should not promote certain values in western markets while supporting an anti-human rights government in another market. == 2016 Rio Summer Olympics == Social media marketing was an influential tool in the promotion and analysis of the 2016 Rio Olympics. Thomas Bach, President of the International Olympic Committee said that the power of sport demonstrates that diversity and interconnectedness can enlighten us all. With over 25,000+ sources of accredited media covering the games, the 2016 games were the most consumed Olympic games to date. Marketing for the Rio Olympics began in 2013 and ultimately lasted 3 years. There were 26 million visits to Olympic.org, the official website of the Olympic games, and over 7 billion views of official Olympic content on social media. There were o

    Read more →
  • Outline of brain mapping

    Outline of brain mapping

    The following outline is provided as an overview of and topical guide to brain mapping: Brain mapping – set of neuroscience techniques predicated on the mapping of (biological) quantities or properties onto spatial representations of the (human or non-human) brain resulting in maps. Brain mapping is further defined as the study of the anatomy and function of the brain and spinal cord through the use of imaging (including intra-operative, microscopic, endoscopic and multi-modality imaging), immunohistochemistry, molecular and optogenetics, stem cell and cellular biology, engineering (material, electrical and biomedical), neurophysiology and nanotechnology. == Broad scope == History of neuroscience History of neurology Brain mapping Human brain Neuroscience Nervous system. === The neuron doctrine === Neuron doctrine – A set of carefully constructed elementary set of observations regarding neurons. For more granularity, more current, and more advanced topics, see the cellular level section Asserts that neurons fall under the broader cell theory, which postulates: All living organisms are composed of one or more cells. The cell is the basic unit of structure, function, and organization in all organisms. All cells come from preexisting, living cells. The Neuron doctrine postulates several elementary aspects of neurons: The brain is made up of individual cells (neurons) that contain specialized features such as dendrites, a cell body, and an axon. Neurons are cells differentiable from other tissues in the body. Neurons differ in size, shape, and structure according to their location or functional specialization. Every neuron has a nucleus, which is the trophic center of the cell (The part which must have access to nutrition). If the cell is divided, only the portion containing the nucleus will survive. Nerve fibers are the result of cell processes and the outgrowths of nerve cells. (Several axons are bound together to form one nerve fibril. See also: Neurofilament. Several nerve fibrils then form one large nerve fiber. Myelin, an electrical insulator, forms around selected axons. Neurons are generated by cell division. Neurons are connected by sites of contact and not via cytoplasmic continuity. (A cell membrane isolates the inside of the cell from its environment. Neurons do not communicate via direct cytoplasm to cytoplasm contact.) Law of dynamic polarization. Although the axon can conduct in both directions, in tissue there is a preferred direction of transmission from cell to cell. Elements added later to the initial Neuron doctrine A barrier to transmission exists at the site of contact between two neurons that may permit transmission. (Synapse) Unity of transmission. If a contact is made between two cells, then that contact can be either excitatory or inhibitory, but will always be of the same type. Dale's law, each nerve terminal releases a single type of neurotransmitter. Some of the basic postulates in the Neuron doctrine have been subsequently questioned, refuted, or updated. See the cellular level section topics for additional information. === Map, atlas, and database projects === Brain Activity Map Project – 2013 NIH $3 billion project to map every neuron in the human brain in ten years, based upon the Human Genome Project. NIH Brain Research through Advancing Innovative Neurotechnologies (BRAIN) Initiative [1] Community outreach site for above where the public may comment [2] Human Brain Project (EU) – 1 billion euro, 10-year project to simulate the human brain with supercomputers. BigBrain A high-resolution 3D atlas of the human brain created as part of the HBP. Human Connectome Project – 2009 NIH $30 million project to build a network map of the human brain, including structural (anatomical) and functional elements. Emphasis included research into dyslexia, autism, Alzheimer's disease, and schizophrenia. See also Connectome a, comprehensive map of neural connections in the brain. Allen Brain Atlas – 2003 $100 million project funded by Paul Allen (Microsoft) BrainMaps – National Institute of Health (NIH) database including 60 terabytes of image scans of primate and non-primates, integrated with information covering structure and function. NeuroNames – Defines the brain in terms of about 550 primary structures (about 850 unique structures) to which all other structures, names, and synonyms are related. About 15,000 neuroanatomical terms are cross indexed, including many synonyms in seven languages. Coverage includes the brain and spinal cord of the four species most frequently studied by neuroscientists: human, macaque (monkey), rat and mouse. The controlled, standardized vocabulary for each structure is located in an unambiguous, strict physical hierarchy, and these terms are selected based on ease of pronunciation, mnemonic value, and frequency of use in recent neuroscientific publications. Relation of each structure to its superstructures and substructures is included. The controlled vocabulary is suitable for uniquely indexing neuroanatomical information in digital databases. Decade of the Brain 1990–1999 promotion by NIH and the Library of Congress "to enhance public awareness of the benefits to be derived from brain research". Communications targeted Members of Congress, staffs, and the general public to promote funding. Talairach Atlas see Jean Talairach Harvard Whole Brain Atlas see Human brain MNI Template see Medical image computing Blue Brain Project and Artificial brain International Consortium for Brain Mapping see Brain Mapping List of neuroscience databases NIH Toolbox National Institute of Health (USA) toolbox for the assessment of neurological and behavioral function Organization for Human Brain Mapping The Organization for Human Brain Mapping (OHBM) is an international society dedicated to using neuroimaging to discover the organization of the human brain. == Imaging and recording systems == This section covers imaging and recording systems. The general section covers history, neuroimaging, and techniques for mapping specific neural connections. The specific systems section covers the various specific technologies, including experimental and widely deployed imaging and recording systems. === General === Most imaging work to date on individual neurons has been conducted outside the brain, typically on large neurons, and has been most frequently destructive. New techniques are however rapidly emerging. Search on "Single neuron imaging" and see related topics: Biological neuron model, Single-unit recording, Neural oscillation, Computational neuroscience. dMRI (above) is also promising in non-destructive imaging of single neurons inside the brain. History of neuroimaging (redirects from Brain scanner) Neuroimaging (redirects from Brain function map) Connectomics – mapping technique showing neural connections in a nervous system. === Specific systems === Cortical stimulation mapping Diffusion MRI (dMRI) – includes diffusion tensor imaging (DTI) and diffusion functional MRI (DfMRI). dMRI is a recent breakthrough in brain mapping allowing the visualization of cross connections between different anatomical parts of the brain. It allows noninvasive imaging of white matter fiber structure and in addition to mapping can be useful in clinical observations of abnormalities, including damage from stroke. Electroencephalography (EEG) – uses electrodes on the scalp and other techniques to detect the electrical flow of currents. Electrocorticography – intracranial EEG, the practice of using electrodes placed directly on the exposed surface of the brain to record electrical activity from the cerebral cortex. Electrophysiological techniques for clinical diagnosis Functional magnetic resonance imaging (fMRI) Medical image computing (brain research of leads medical and surgical uses of mapping technology) Neurostimulation (in research stimulation is frequently used in conjunction with imaging) Positron emission tomography (PET) – a nuclear medical imaging technique that produces a three-dimensional image or picture of functional processes in the body. The system detects pairs of gamma rays emitted indirectly by a positron-emitting radionuclide (tracer), which is introduced into the body on a biologically active molecule. Three-dimensional images of tracer concentration within the body are then constructed by computer analysis. In modern scanners, three dimensional imaging is often accomplished with the aid of a CT X-ray scan performed on the patient during the same session, in the same machine. === Imaging and recording componentry === ==== Electrochemical ==== Haemodynamic response – the rapid delivery of blood to active neuronal tissues. Blood Oxygenation Level Dependent signal (BOLD), corresponds to the concentration of deoxyhemoglobin. The BOLD effect is based on the fact that when neuronal activity is increased in one part of the brain, there is also an increased amount of cerebral blood flow to that area. Functional m

    Read more →
  • Philco computers

    Philco computers

    Philco was one of the pioneers of transistorized computers, also known as second-generation computers. After the company developed the surface-barrier transistor, which was much faster than previous point-contact types, it was awarded contracts for military and government computers. Commercialized derivatives of some of these designs became successful business and scientific computers. The TRANSAC (Transistor Automatic Computer) Model S-1000 was released as a scientific computer. The TRANSAC S-2000 mainframe computer system was first produced in 1958, and a family of compatible machines, with increasing performance, was released over the next several years. However, the mainframe computer market was dominated by IBM. Other companies could not deploy resources for development, customer support and marketing on the scale that IBM could afford, making competition in this segment difficult after the introduction of the IBM 360 family. Philco went bankrupt and was purchased in 1961 by Ford Motor Company, but the computer division carried on until the Philco division of Ford exited the computer business in 1963. The Ford company maintained one Philco mainframe in use until 1981. == The surface-barrier transistor == The surface-barrier transistor developed by Philco in 1953 had a much higher frequency response than the original point-contact transistors. The transistor was made of a thin crystal of germanium, which was electrolytically etched with pits on either side forming a very thin base region, on the order of 5 micrometers. Philco's process for etching was United States patent number 2,885,571. Philco surface-barrier transistors were used in TX-0, and in early models of what would become the DEC PDP product line. Although relatively fast, the small size of the devices limited their power to circuits operating at a few tens of milliwatts. == Military and government == Between 1955 and 1957, Philco built transistor computers for use in aircraft, models C-1000, C-1100, and C-1102, intended for airborne real-time applications. By 1957, the C-1102 had been used by a civilian sector customer. The BASICPAC AN/TYK 6V (first delivery in 1961), COMPAC AN/TYK 4V (not completed), and LOGICPAC systems were built for the US Army as transportable computer systems for use with their Fieldata concept of integrated information management. BASICPAC was a transistorized computer with up to 28,672 words of 38-bit core memory (including sign and parity), available in several configurations from a minimum system, to a truck-borne mobile version, to a fully expanded system. Basic clock periods was 1 microsecond (which gives a clock rate of 1 MHz), with 12 microsecond memory access and a fixed-point multiplication taking 242 microseconds. Input/output was by paper tape reader and punch, or through a teletypewriter. With additional hardware, magnetic tape storage was also available, with up to seven I/O devices. The instruction set had 31 basic operation codes and nine opcodes for I/O === CXPQ === Philco was contracted by the US Navy to build the CXPQ computer. One model was completed and installed at the David Taylor Model Basin. This design was later adapted to become the commercial TRANSAC S-2000. Only one CXPQ was built. The CXPQ is a 48-bit transistorized computer. === SOLO === In 1955, the National Security Agency through the US Navy contracted with Philco to produce a computer suitable for use as a workstation, with an architecture based on the vacuum-tube computer system called Atlas II already in use at the NSA, and similar to the commercial UNIVAC 1103. At the time, Philco was the largest producer of surface barrier transistors, which were the only type available with the speed and quantities required for a computer. The SOLO prototype was delivered in 1958, but required extensive debugging at NSA. Difficulties were encountered with core memory and power supplies. SOLO used paper tape and teleprinter machines for input and output. SOLO cost about $1 million US, and contained 8,000 transistors. While the system was extensively used for training, testing, research and development, no additional units were ordered. SOLO was removed from active service in 1963. The design of the SOLO became commercialized as Philco's TRANSAC Model S-1000. == Commercial == === S-1000 === The TRANSAC S-1000 was a scientific computer with a 36-bit word length and 4096 words of core memory. It was packaged in a container about the size of a large office desk, and used only 1.2 kilowatts, much less than vacuum-tube-based computers of similar capacity. In a 1961 survey, about 15 S-1000 computer installations had been identified. It weighed about 1,650 pounds (750 kg). === S-2000 === The TRANSAC S-2000 was a large mainframe system intended for both business and scientific work. It had a 48-bit word length and supported calculations in fixed point, floating point and binary-coded decimal formats. The original S-2000 "TRANSAC" (Transistor Automatic Computer) released in 1958 was later designated Model 210; it was used internally at Philco. Similar to the Control Data Corporation Model 1604, it was a 48-bit fully transistorized computer. Three succeeding models were released in the series, all compatible with the software of the original model. The Model 211 was introduced in 1960, using micro-alloy diffused field-effect transistors, requiring significant redesign of circuits compared to the original. The TRANSAC S-2000/Philco 210/211 weighed about 2,000 pounds (910 kg). By 1964, eighteen Model 210, eighteen Model 211 and seven Model 212 systems had been sold. After Philco was purchased by Ford Motor Company, the Model 212 was introduced in 1962 and released in 1963. It had 65,535 words of 48-bit memory. Initially made with 6-microsecond core memory, it had better performance than the IBM 7094 transistor computer. It was later upgraded in 1964 to 2-microsecond core memory, which gave the machine floating-point performance greater than the IBM 7030 Stretch computer. A Model 213 was announced in 1964 but never built. By that time competition from IBM had made the Philco computer operations no longer profitable for Ford, and the division was closed down. The Model 212 could carry out a floating-point multiplication in 22 microseconds. Each word contained two 24-bit instructions with 16 bits of address information and eight bits for the opcode. There were 225 different valid opcodes in the Model 212; invalid opcodes were detected and halted the machine. The CPU had an accumulator register of 48 bits, three general-purpose registers of 24 bits, and 32 index registers of 15 bits. Main memory size ranged from 4K words to 64K words. Only the first model had a magnetic drum memory; later editions used tape drives. The Model 212 weighed about 6,500 pounds (3.3 short tons; 2.9 t). Software for the S-2000 initially consisted of TAC (Translator-Assembler-Compiler), and ALTAC, a FORTRAN II-like language with some differences from the IBM 704 FORTRAN implementation. A COBOL compiler was also available, targeted at business applications. The Philco 2400 was the input/output system for the S-2000. Operations such as reading cards or printing were carried out through magnetic tapes, thereby offloading the S-2000 from relatively slow input/output processing. The 2400 had a 24-bit word length and could be supplied with 4K to 32K characters (1K to 8K words) of core memory, rated at 3-microsecond cycle time. The instruction set was aimed at character I/O use. The idea of base registers, implemented in Philco computers, influenced the design of IBM/360. The last Philco TRANSAC S-2000 Model 212 was taken out of service in December 1981, after 19 years of service at Ford.

    Read more →
  • TRAME

    TRAME

    TRAME (TRAnsmission of MEssages) was the name of the second computer network in the world similar to the internet to be used in an electric utility. Like the internet, the base technology was packet switching; it was developed by the electric utility ENHER in Barcelona. It was deployed by the same utility, first in Catalonia and Aragón, Spain, and later in other places. Its development started in 1974 and the first routers, called nodes at that time, were deployed by 1978. The network was in operation until 2016 (38 years) with successive technological software and hardware updates. == Beginnings == In 1974, packet switching was a technology known only in research circles. The concept began in 1968 in association with the United States' Advanced Research Projects Agency (ARPA) research project ARPANET. The idea of applying the packet switching concept to electric utilities control communication networks first appeared in 1974 when the Swedish power utility Vattenfall started to create its TIDAS packet-switching network and was followed by the Spanish electric utility ENHER, which aimed to telecontrol and automate its high-voltage power grid. For this purpose, ENHER created a specific team of people to develop both the packet-switching network and the supervisory control and data acquisition (SCADA) system, also called the telecontrol system. By 1978 the first four TRAME routers were available and by 1980, eight of them were deployed and operating. The printed circuit boards (PCBs) controlling the communication lines were connected to a shared memory PCB allowing them to exchange data and messages. The project was developed together with its main initial application, the Telecontrol or SCADA system SICL (Sistema Integral de Control Local) with which initially they shared a very similar hardware. The maximum link capacity was 9600 bit/s, which in 1980 was the maximum possible on a 4 kHz wide voice channel at the time. These channels were the basic unit of the then-analog communication systems in use. By that time power utilities used either telephone calls or low speed (below 1200bit/s) dedicated links for telecontrol, typically shared among ten high-voltage electrical substations. == Services == The basic service provided by the TRAME network was SCADA or Telecontrol to automate the high-voltage power grid, thus improving operational efficiency, which was until then operated manually with telephone communication between human operators. Each TRAME router was associated with one or more remote terminal units (RTUs) of the SICL telecontrol system. It also had connected screens, and later PCs, located in electrical substations to interchange messages between them and with the Control Center located in the well-known Casa Fuster in Barcelona. It was a kind of predecessor to today's e-mail. Later, in the 1990s, other protocols (X.25, IP) were developed to include corporate information technology (IT) terminals, company physical surveillance systems and other services. Additionally, applications and terminals were developed for the transmission of voice and video over the TRAME network. == Protocols == The TRAME routing system, like that of the original ARPANET, was based on the Bellman-Ford algorithm but with "split-horizon" as in the Swedish TIDAS network, but with an original improvement. This protocol allows optimal paths to be found in meshed networks for each packet to be transmitted, allowing the shared use of the same network by multiple services. In contrast, traditional circuit-switched technology used to establish dedicated circuits for each service or communication. The addressing of routers and terminals used a proprietary system with a 16-bit address; it would be the equivalent of the well-known IP (Internet Protocol) version 4 (IPv4), still in use on the internet today, which uses 32-bit addresses. It is necessary to take into account that in 1978, the IPv4 protocol did not yet exist since the IPv4 version used on the internet did not appear until 1981, and in fact, did not reach the general public until much later. The line protocols were also proprietary and were called UCL (Unidad de Control de Línea, 'line control unit'), which linked the routers together, and UTR (Unión TRAME-Remotas), the access protocol. They were designed to offer the highest quality of service required by the telecontrol/SCADA function in terms of data integrity and availability set by the International Electrotechnical Commission (IEC) IEC-870-5-1 and ANSI C37.1. standards, and because the protocol used at the time in corporate computer networks, HDLC (high-level data link control), did not offer enough quality for critical industrial applications. Later on, other protocols like X.25 and IP were also made compatible with the aforementioned TRAME protocols. In 2000, the UTR protocol was replaced by the international standard IEC 60870- 5-101/104. Initially network flow control was based on the management of eight data priorities in head-of-the-line (HOL) waiting queues. Later and after some experimentation, a flow control method based on a bit indicating route congestion and management of the gap between packets when accessing the network was adopted. This required measuring the capacity of the route bottleneck. An end-to-end protocol was also added for some flows requiring order preservation like X.25. == Evolution == To last for 38 years, the technology had to endure intense evolution. There were essentially four TRAME generations which are summarized in the table. A description of the four generations of TRAME is provided below. === TRAME 1 === The project began in 1974 and in 1978 a first network with four routers was already installed and in operation at the electric utility ENHER. In 1980, the network had eight nodes in operation (see Figure I). The hardware was based on the Zilog Z80 processor and had a multiprocessor structure with 16 processors sharing a common memory. The software was developed at ENHER's headquarters located in the well-known Casa Fuster, Passeig de Gràcia, 132, Barcelona, using the Z80 assembly language. Beyond 1980 the software began to be written in C programming language and an HP64000 Logic Development System emulator was used for the purpose. The hardware was produced by ISEL, an INI (Instituto Nacional de Indústria) company. The routing system was a variant of Bellman-Ford with split-horizon. It was an improvement of the original ARPA network routing system consisting of an original update procedure which allowed for a faster reaction to changes. The distance function was the number of packets in the output waiting queues plus one. The line protocols (UCL for internal lines linking routers and UTR for accessing the network) were designed to meet the stringent requirements set for telecontrol (SCADA) of high-voltage power networks (IEC-870-5-1 and ANSI C37.1 standards). At the OSI transport layer, windows with a width of 1 to 8, depending on the required service, residing in the terminals were used. Initially, addresses were only 14 bits long to address both the routers (called nodes by then) and the devices connected to them. They were made up of two fields, an 8-bit field to address the router and a 6-bit sub-address to address the terminals connected to it. The node address was assigned to the nodes and not to the ends of the links as in the internet. The basic advantages of TRAME over other technologies used in electric utilities at the time were in part due to the packet technology itself: ability to manage any network topology, automatic adaptability to topological and traffic changes, integration of different link technologies (digital or analog) and capacities in a single network, open and decentralized intercommunicability between users and devices, simultaneous communication with several users and locations from a single physical connection, and integrated network supervision. In fact, the network was provided from its inception with a supervision center consisting of a computer and a synoptic board located at the company's headquarters (see Figure II). But other advantages were due to the specific design of TRAME: high data integrity, priority support for packets, and ease of including special protocols such as the many SCADA protocols in use at that time. All of the above resulted in improved quality of service, especially with respect to data availability and data integrity, and in the integration of services in a single network. Part of the evolution of its deployment can be seen in Figures II to IV. === TRAME 2 === In 1990, TRAME 2 was fully deployed and TRAME 1 was replaced. The processor of the new hardware was Intel 80286 and the hardware structure and external appearance of the routers was very similar to that of TRAME 1. The software was written in C and the above-mentioned emulator continued to be used. Improvements over TRAME 1 were the introduction of the standardized X.25 access protocol

    Read more →
  • Social Media (Age-Restricted Users) Bill

    Social Media (Age-Restricted Users) Bill

    The Social Media (Age-Restricted Users) Bill is a member's bill by National Party Member of Parliament Catherine Wedd that seeks to ban children under the age of 16 years from accessing social media by forcing social media companies to implement age verification measures. It is modelled after the Australian government's Online Safety Amendment. In mid October 2025, the New Zealand Parliament confirmed plans to introduce the social media age restriction bill. == Background == In late November 2024, the Albanese government of Australia, with support from the opposition Coalition parties, passed the Online Safety Amendment creating a world-first age verification regime targeting social media platforms operating in the country. The ban targets several social media platforms including Facebook, Instagram, Kick, Reddit, Snapchat, Threads, TikTok, Twitch, X (formerly Twitter) and YouTube. These platforms were required to implement age verification systems and to remove under-age users by 10 December 2025, when the law change came into effect. == Draft provisions == The draft Social Media (Age-Restricted Users) Bill defines social media platforms as electronic platforms that enable social media interactions between two or more end-users, facilitates communication between multiple end-users and allows users to post content on the platform. The proposed bill requires social media companies to take action to prevent users under the age of 16 from creating accounts on their platforms. It also creates a framework for courts to impose fines on platforms that fail to take reasonable steps to prevent underaged users from accessing the platform. == Legislative history == === Draft legislation === On 6 May 2025, Wedd announced a private member's bill called the "Social Media (Age-Restricted Users) Bill" that would bar access to social media platforms for people under the age of 16 years. She said that she was motivated as the mother of four children to support families, parents and teachers' efforts to manage their children's online exposure and the passage of the Australian Online Safety Amendment legislation in December 2024. Since National's coalition partner ACT New Zealand had refused to support the bill, the Sixth National Government announce it as a member's bill rather than a government bill. Prime Minister Christopher Luxon has confirmed that National would seek cross-party support for the legislation. ACT MP and the Minister of Internal Affairs Brooke van Velden said that the Government would watch the implementation of the Australian social media age restriction policy. In October 2025, Wedd's bill was drawn from the parliamentary ballot. In addition, Labour Reuben Davidson drafted a similar member's bill that would hold social media providers responsible for restricting "harmful content" and imposed NZ$50,000 fines for non-compliance. In November 2025, Luxon reiterated his support for social media age restriction legislation and said the New Zealand government would introduce a bill in 2026 before the 2026 New Zealand general election. He also confirmed that Education Minister Erica Stanford was leading an investigation into what lessons could be learnt from the Australian legislation. At the request of ACT MP Parmjeet Parmar, Parliament's Education and Workforce Committee held an inquiry into a proposed social media ban in early October 2025. The committee was led by National MP Carl Bates and received 430 submissions from 400 groups and individuals. The committee also heard from 87 in-person submissions. On 10 December 2025, the committee made 12 recommendations including restricting social media access to persons under the age of 16, re-evaluating existing legislation such as the Films, Videos, and Publications Classification Act and the Harmful Digital Communications Act 2015, and regulating online platforms and Internet service providers. The ACT party released a dissenting view disagreeing with the need for a law restricting social media access to under-16 year olds. In mid-May 2026, the Government confirmed that work on the proposed bill to ban under-16 year olds from social media had been paused. The New Zealand Parliament held a debate on the proposed bill on 13 May following a select committee inquiry into the harms caused by social media platforms. While the opposition Labour Party has agreed to support the member's bill, the ACT and Green parties opposed the proposed bill on the grounds that the rules were easy to circumvent, that at-risk groups could become more isolated, and that social media also harmed other age groups. == Responses == === Academia and civil society === In late July 2025, the New Zealand Council for Civil Liberties (NZCCL) expressed concern that the proposed social media age restriction could infringe upon the New Zealand Bill of Rights Act 1990, the Privacy Act 2020 and the United Nations' Convention on the Rights of the Child. The NZCCL also questioned the practicality of age verification software, a social media age limit and whether it would fulfil its stated goal of combating online harm. In August 2025, University of Auckland criminologist and senior lecturer Claire Meehan expressed concern that the social media age restriction legislation would cut children from their friendship and support networks. She also said that children and young people were digital natives who could use VPNs to circumvent the ban. Similar sentiments were echoed by Victoria University of Wellington media and communications lecturer Alex Beattie and "Ocean Today" Instagram social media influencer "Charlie." In October 2025, New Zealand Initiative representative Dr Eric Crampton expressed concern that a social media age restriction would involve the introduction of digital IDs. He argued that a new law was unnecessary and said that parents could limit their children's exposure to social media via Google's Family Link and Apple's equivalent. Similarly, Institute of Economic Affairs public policy fellow Matthew Lesh and the British Free Speech Union expressed concerns that young people could use VPNs to circumvent a social media ban, citing the spike in VPN usage in the United Kingdom following the passage of the Online Safety Act 2023. The advocacy group B416's co-chair Anna Curzon advocated for a social media ban on underage users, stating that social media apps "are made to be addictive" and made it difficult for parents to relate with their children. In late November 2025, B416's co-founder Anna Mowbray expressed support for the Government's social media age restriction bill but expressed disappointment that Luxon had not timed his announcement with the launch of the group's campaign. Generation-Z Aotearoa co-founder Lola Fisher has called on the New Zealand Government to consult with young people on the development of the legislation. === Government agencies and departments === In early October 2025, Privacy Commissioner Michael Webster expressed concern that social media platforms requiring users to prove their age via digital IDs could raise privacy concerns. Webster suggested that age verification systems could relay on various documents including passports. He said that age estimation technologies had high error rates and that age inference technologies relied on data mining. === Political parties === In early May 2025, the National Party government expressed support for a social media age restriction legislation. By contrast, its coalition partner ACT has opposed such legislation. ACT leader David Seymour described the ban as hasty and unworkable since it did not involve parents. Meanwhile, New Zealand First leader Winston Peters expressed support for a social media age restriction but said the bill should be subject to a select committee inquiry. The opposition Labour Party leader Chris Hipkins has expressed interest in a social media age restriction legislation but emphasised the need for consensus. Meanwhile, Green Party co-leader Chlöe Swarbrick said she wanted to learn more about the bill but described it as simplistic. Fellow Greens co-leader Marama Davidson said that the proposed bill would punish children and young people for the harm caused by big tech platforms. === Tech companies === In early October 2025, representatives of TikTok and Meta Platforms cautioned against proposed social media ban on under-16 years olds. During a one-day parliamentary inquiry, Ella Woods-Joyce, TikTok's public policy lead for Australia and New Zealand, and Mia Garlick, Meta's regional director of policy, expressed concern that the social media age restriction could send children and young people to less regulated online spaces. Woods-Joyce highlighted TikTok's policy of closing down accounts belonging to users under the age of 13 years while Garlick highlighted Meta's policy of placing users under the age of 16 in private accounts by default. In early February 2026 Meta's vice president and global head of safety, Antigone Da

    Read more →
  • Inductive programming

    Inductive programming

    Inductive programming (IP) is a special area of automatic programming, covering research from artificial intelligence and programming, which addresses learning of typically declarative (logic or functional) and often recursive programs from incomplete specifications, such as input/output examples or constraints. Depending on the programming language used, there are several kinds of inductive programming. Inductive functional programming, which uses functional programming languages such as Lisp or Haskell, and most especially inductive logic programming, which uses logic programming languages such as Prolog and other logical representations such as description logics, have been more prominent, but other (programming) language paradigms have also been used, such as constraint programming or probabilistic programming. == Definition == Inductive programming incorporates all approaches which are concerned with learning programs or algorithms from incomplete (formal) specifications. Possible inputs in an IP system are a set of training inputs and corresponding outputs or an output evaluation function, describing the desired behavior of the intended program, traces or action sequences which describe the process of calculating specific outputs, constraints for the program to be induced concerning its time efficiency or its complexity, various kinds of background knowledge such as standard data types, predefined functions to be used, program schemes or templates describing the data flow of the intended program, heuristics for guiding the search for a solution or other biases. Output of an IP system is a program in some arbitrary programming language containing conditionals and loop or recursive control structures, or any other kind of Turing-complete representation language. In many applications the output program must be correct with respect to the examples and partial specification, and this leads to the consideration of inductive programming as a special area inside automatic programming or program synthesis, usually opposed to 'deductive' program synthesis, where the specification is usually complete. In other cases, inductive programming is seen as a more general area where any declarative programming or representation language can be used and we may even have some degree of error in the examples, as in general machine learning, the more specific area of structure mining or the area of symbolic artificial intelligence. A distinctive feature is the number of examples or partial specification needed. Typically, inductive programming techniques can learn from just a few examples. The diversity of inductive programming usually comes from the applications and the languages that are used: apart from logic programming and functional programming, other programming paradigms and representation languages have been used or suggested in inductive programming, such as functional logic programming, constraint programming, probabilistic programming, abductive logic programming, modal logic, action languages, agent languages and many types of imperative languages. == History == The early works of Plotkin, and his "relative least general generalization (rlgg)", had an enormous impact in inductive logic programming. There were some encouraging results on learning recursive Prolog programs such as quicksort from examples together with suitable background knowledge, for example with GOLEM. However, after initial success, the community got disappointed by limited progress about the induction of recursive programs with ILP less and less focusing on recursive programs and leaning more and more towards a machine learning setting with applications in relational data mining and knowledge discovery. In parallel to work in ILP, Koza proposed genetic programming in the early 1990s as a generate-and-test based approach to learning programs. The idea of genetic programming was further developed into the inductive programming system ADATE and the systematic-search-based system MagicHaskeller. Here again, functional programs are learned from sets of positive examples together with an output evaluation (fitness) function which specifies the desired input/output behavior of the program to be learned. The early work in grammar induction (also known as grammatical inference) is related to inductive programming, as rewriting systems or logic programs can be used to represent production rules. In fact, early works in inductive inference considered grammar induction and Lisp program inference as basically the same problem. The results in terms of learnability were related to classical concepts, such as identification-in-the-limit, as introduced in the seminal work of Gold. More recently, the language learning problem was addressed by the inductive programming community. In the recent years, the classical approaches have been resumed and advanced with great success. Therefore, the synthesis problem has been reformulated on the background of constructor-based term rewriting systems taking into account modern techniques of functional programming, as well as moderate use of search-based strategies and usage of background knowledge as well as automatic invention of subprograms. Many new and successful applications have recently appeared beyond program synthesis, most especially in the area of data manipulation, programming by example and cognitive modelling (see below). Other ideas have also been explored with the common characteristic of using declarative languages for the representation of hypotheses. For instance, the use of higher-order features, schemes or structured distances have been advocated for a better handling of recursive data types and structures; abstraction has also been explored as a more powerful approach to cumulative learning and function invention. One powerful paradigm that has been recently used for the representation of hypotheses in inductive programming (generally in the form of generative models) is probabilistic programming (and related paradigms, such as stochastic logic programs and Bayesian logic programming). == Application areas == The first workshop on Approaches and Applications of Inductive Programming (AAIP) Archived 2016-03-03 at the Wayback Machine held in conjunction with ICML 2005 identified all applications where "learning of programs or recursive rules are called for, [...] first in the domain of software engineering where structural learning, software assistants and software agents can help to relieve programmers from routine tasks, give programming support for end users, or support of novice programmers and programming tutor systems. Further areas of application are language learning, learning recursive control rules for AI-planning, learning recursive concepts in web-mining or for data-format transformations". Since then, these and many other areas have shown to be successful application niches for inductive programming, such as end-user programming, the related areas of programming by example and programming by demonstration, and intelligent tutoring systems. Other areas where inductive inference has been recently applied are knowledge acquisition, artificial general intelligence, reinforcement learning and theory evaluation, and cognitive science in general. There may also be prospective applications in intelligent agents, games, robotics, personalisation, ambient intelligence and human interfaces.

    Read more →
  • Microsoft Security Development Lifecycle

    Microsoft Security Development Lifecycle

    The Microsoft Security Development Lifecycle (SDL) is the approach Microsoft uses to integrate security into DevOps processes (sometimes called a DevSecOps approach). You can use this SDL guidance and documentation to adapt this approach and practices to your organization. == Overview == The practices outlined in the SDL approach are applicable to all types of software development and across all platforms, ranging from traditional waterfall methodologies to modern DevOps approaches. They can generally be applied to the following: Software – whether you are developing software code for firmware, AI applications, operating systems, drivers, IoT Devices, mobile device apps, web services, plug-ins or applets, hardware microcode, low-code/no-code apps, or other software formats. Note that most practices in the SDL are applicable to secure computer hardware development as well. Platforms – whether the software is running on a ‘serverless’ platform approach, on an on-premises server, a mobile device, a cloud hosted VM, a user endpoint, as part of a Software as a Service (SaaS) application, a cloud edge device, an IoT device, or anywhere else. == Practices == The SDL recommends 10 security practices to incorporate into your development workflows. Applying the 10 security practices of SDL is an ongoing process of improvement so a key recommendation is to begin from some point and keep enhancing as you proceed. This continuous process involves changes to culture, strategy, processes, and technical controls as you embed security skills and practices into DevOps workflows. The 10 SDL practices are: Establish security standards, metrics, and governance Require use of proven security features, languages, and frameworks Perform security design review and threat modeling Define and use cryptography standards Secure the software supply chain Secure the engineering environment Perform security testing Ensure operational platform security Implement security monitoring and response Provide security training == Versions ==

    Read more →
  • Myrinet

    Myrinet

    Myrinet, ANSI/VITA 26-1998, is a high-speed local area networking system designed by the company Myricom to be used as an interconnect between multiple machines to form computer clusters. == Description == Myrinet was promoted as having lower protocol overhead than standards such as Ethernet, and therefore better throughput, less interference, and lower latency while using the host CPU. Although it can be used as a traditional networking system, Myrinet is often used directly by programs that "know" about it, thereby bypassing a call into the operating system. Earlier versions of Myrinet used a variety of media and connectors: Generation 2 used copper media with DC-37 (Myrinet-LAN, M2L- controllers and switches) or microribbon (Myrinet-SAN, M2M-) connectors. Generation 3 used copper media with HSSDC (Myrinet-Serial, M3S-) or microribbon (Myrinet-SAN, M3M-) connectors, or fiber with LC-connectors (Myrinet-Fiber, M3F-). The later versions of Myrinet physically consist of two fibre optic cables, upstream and downstream, connected to the host computers with a single connector. Machines are connected via low-overhead routers and switches, as opposed to connecting one machine directly to another. Myrinet includes a number of fault-tolerance features, mostly backed by the switches. These include flow control, error control, and "heartbeat" monitoring on every link. The "fourth-generation" Myrinet, called Myri-10G, supported a 10 Gbit/s data rate and can use 10 Gigabit Ethernet on PHY, the physical layer (cables, connectors, distances, signaling). Myri-10G started shipping at the end of 2005. Myrinet was approved in 1998 by the American National Standards Institute for use on the VMEbus as ANSI/VITA 26-1998. One of the earliest publications on Myrinet is a 1995 IEEE article. === Performance === Myrinet is a lightweight protocol with little overhead that allows it to operate with throughput close to the basic signaling speed of the physical layer. For supercomputing, the low latency of Myrinet is even more important than its throughput performance, since, according to Amdahl's law, a high-performance parallel system tends to be bottlenecked by its slowest sequential process, which in all but the most embarrassingly parallel supercomputer workloads is often the latency of message transmission across the network. === Deployment === According to Myricom, 141 (28.2%) of the June 2005 TOP500 supercomputers used Myrinet technology. In the November 2005 TOP500, the number of supercomputers using Myrinet was down to 101 computers, or 20.2%, in November 2006, 79 (15.8%), and by November 2007, 18 (3.6%), a long way behind gigabit Ethernet at 54% and InfiniBand at 24.2%. In the June 2014 TOP500 list, the number of supercomputers using Myrinet interconnect was 1 (0.2%). In November 2013, the assets of Myricom (including the Myrinet technology) were acquired by CSP Inc. In 2016, it was reported that Google had also offered to buy the company.

    Read more →
  • ACTS Gigabit Satellite Network

    ACTS Gigabit Satellite Network

    The ACTS Gigabit Satellite Network was a pioneering, high-speed communications satellite network in the years 1993-2004, created as a prototype system to explore high-speed networking of digital endpoints. The system was jointly sponsored by NASA and ARPA, implemented by BBN Technologies and Motorola, and was inducted into the Space Technology Hall of Fame in April 1997. The Advanced Communications Technology Satellite (ACTS) network was designed to provide fiber-compatible SONET service to remote nodes and networks through a wideband satellite system, and provided long-haul, point-to-point and point-to-multipoint full-duplex SONET services, at rates up to 622 Mbit/s, over NASA's Advanced Communication Technology Satellite (ACTS). The Advanced Communications Technology Satellite itself, built and operated by Lockheed Martin, was launched on STS-51 on September 12, 1993, by the Space Shuttle Discovery, and occupied a geostationary orbit at 100° west longitude. It was the first communication satellite to operate in the 20–30 GHz frequency band (Ka band), with 30 GHz uplink and 20 GHz downlink signals. The satellite incorporated advanced on-board switching and multiple dynamically-hopping spot-beam antennas for selected areas of the United States including Hawaii. Up to 3 uplink and 3 downlink antenna beams could be active simultaneously. The ACTS network ground terminals were transportable Gigabit Earth Stations (GES) with fiber-optic SONET interfaces (OC-3 and OC-12), which also supported the Asynchronous Transfer Mode (ATM) protocol suite. The network control and management functions are distributed in the various Gigabit Earth Stations, with the operator's interface being centralized in a Network Management Terminal (NMT), which could be collocated at a GES, or anywhere in the Internet. The system was operational and used for experiments for 127 months, instead of the originally planned 24–48 months. In all, 53 terminals were built and used by more than 100 experimenters to test ACTS abilities. In Nov. 1997 a record data rate of 520 Mbit/s TCP/IP throughput was achieved using ATM between several ground stations via ACTS. On May 31, 2000 the ACTS experiments program officially came to a close, but the system continued to support experiments until it was deactivated on April 28, 2004.

    Read more →
  • Gallery software

    Gallery software

    Gallery software is software that helps the user publish or share photos, pictures, videos or other digital media. Most galleries are located on Web servers, where users are allowed to register and publish their pictures. Gallery software usually features automatic image resizing, allows digital media be categorized into sets, and allows comments. == Types == Early digital media publishing and sharing was done with imageboards. The boards are by topics, sometimes called "chan". Each discussion in a "chan" are started with a piece of digital media, and follow-up discussions can contain another piece too. Software works in this way: Futallaby, Danbooru. Traditionally, galleries are managed. An administrator maintains a set of or hierarchy of albums. The users can upload their digital media in one of the existing albums defined by an administrator, or create their own albums. The users with sufficient permission can re-categorise the digital media others uploaded. Often, the site's administrator can define which album the users are allowed to categorise their media into, or delete other user's content. Examples are open source galleries Coppermine, Gallery Project. There are decentralised gallery software that does not have an administrator for managing contents. Pinterest, Flickr and DeviantArt has been successful with this model. Open source gallery software MediaGoblin works in this way. Each user can create their own "collections", to categorise theirs or other users' media. However users cannot put media into other user's collections. Each user's category is separate. There is no centralised theme or hierarchy for the media.

    Read more →
  • Yao's test

    Yao's test

    In cryptography and the theory of computation, Yao's test is a test defined by Andrew Chi-Chih Yao in 1982, against pseudo-random sequences. A sequence of words passes Yao's test if an attacker with reasonable computational power cannot distinguish it from a sequence generated uniformly at random. == Formal statement == === Boolean circuits === Let P {\displaystyle P} be a polynomial, and S = { S k } k {\displaystyle S=\{S_{k}\}_{k}} be a collection of sets S k {\displaystyle S_{k}} of P ( k ) {\displaystyle P(k)} -bit long sequences, and for each k {\displaystyle k} , let μ k {\displaystyle \mu _{k}} be a probability distribution on S k {\displaystyle S_{k}} , and P C {\displaystyle P_{C}} be a polynomial. A predicting collection C = { C k } {\displaystyle C=\{C_{k}\}} is a collection of boolean circuits of size less than P C ( k ) {\displaystyle P_{C}(k)} . Let p k , S C {\displaystyle p_{k,S}^{C}} be the probability that on input s {\displaystyle s} , a string randomly selected in S k {\displaystyle S_{k}} with probability μ ( s ) {\displaystyle \mu (s)} , C k ( s ) = 1 {\displaystyle C_{k}(s)=1} , i.e. Moreover, let p k , U C {\displaystyle p_{k,U}^{C}} be the probability that C k ( s ) = 1 {\displaystyle C_{k}(s)=1} on input s {\displaystyle s} a P ( k ) {\displaystyle P(k)} -bit long sequence selected uniformly at random in { 0 , 1 } P ( k ) {\displaystyle \{0,1\}^{P(k)}} . We say that S {\displaystyle S} passes Yao's test if for all predicting collection C {\displaystyle C} , for all but finitely many k {\displaystyle k} , for all polynomial Q {\displaystyle Q} : === Probabilistic formulation === As in the case of the next-bit test, the predicting collection used in the above definition can be replaced by a probabilistic Turing machine, working in polynomial time. This also yields a strictly stronger definition of Yao's test (see Adleman's theorem). Indeed, one could decide undecidable properties of the pseudo-random sequence with the non-uniform circuits described above, whereas BPP machines can always be simulated by exponential-time deterministic Turing machines.

    Read more →
  • Data independence

    Data independence

    Data independence is the type of data transparency that matters for a centralized DBMS. It refers to the immunity of user applications to changes made in the definition and organization of data. Application programs should not, ideally, be exposed to details of data representation and storage. The DBMS provides an abstract view of the data that hides such details. There are two types of data independence: physical and logical data independence. The data independence and operation independence together gives the feature of data abstraction. There are two levels of data independence. == Logical data independence == The logical structure of the data is known as the 'schema definition'. In general, if a user application operates on a subset of the attributes of a relation, it should not be affected later when new attributes are added to the same relation. Logical data independence indicates that the conceptual schema can be changed without affecting the existing schemas. == Physical data independence == The physical structure of the data is referred to as "physical data description". Physical data independence deals with hiding the details of the storage structure from user applications. The application should not be involved with these issues since, conceptually, there is no difference in the operations carried out against the data. There are three types of data independence: Logical data independence: The ability to change the logical (conceptual) schema without changing the External schema (User View) is called logical data independence. For example, the addition or removal of new entities, attributes, or relationships to the conceptual schema or having to rewrite existing application programs. Physical data independence: The ability to change the physical schema without changing the logical schema is called physical data independence. For example, a change to the internal schema, such as using different file organization or storage structures, storage devices, or indexing strategy, should be possible without having to change the conceptual or external schemas. View level data independence: always independent no effect, because there doesn't exist any other level above view level. == Data independence == Data independence can be explained as follows: Each higher level of the data architecture is immune to changes of the next lower level of the architecture. The logical scheme stays unchanged even though the storage space or type of some data is changed for reasons of optimization or reorganization. In this, external schema does not change. In this, internal schema changes may be required due to some physical schema were reorganized here. Physical data independence is present in most databases and file environment in which hardware storage of encoding, exact location of data on disk, merging of records, so on this are hidden from user. == Data independence types == The ability to modify schema definition in one level without affecting schema of that definition in the next higher level is called data independence. There are two levels of data independence, they are Physical data independence and Logical data independence. Physical data independence is the ability to modify the physical schema without causing application programs to be rewritten. Modifications at the physical level are occasionally necessary to improve performance. It means we change the physical storage/level without affecting the conceptual or external view of the data. The new changes are absorbed by mapping techniques. Logical data independence is the ability to modify the logical schema without causing application programs to be rewritten. Modifications at the logical level are necessary whenever the logical structure of the database is altered (for example, when money-market accounts are added to banking system). Logical Data independence means if we add some new columns or remove some columns from table then the user view and programs should not change. For example: consider two users A & B. Both are selecting the fields "EmployeeNumber" and "EmployeeName". If user B adds a new column (e.g. salary) to his table, it will not affect the external view for user A, though the internal schema of the database has been changed for both users A & B. Logical data independence is more difficult to achieve than physical data independence, since application programs are heavily dependent on the logical structure of the data that they access.

    Read more →