The ChessMachine was a chess computer sold between 1991 and 1995 by TASC (The Advanced Software Company). It was unique at the time for incorporating both an ARM2 coprocessor for the chess engine on an ISA card which plugged into an IBM PC and a software interface running on the PC to display a chess board and control the engine. The ISA card was sold with a CPU running at either 16 MHz or 32 MHz, and 128 KB, 512 KB, or 1 MB of onboard memory for transposition tables. This made economic sense at the time of introduction because mainstream PCs were only running from 10 MHz to 25 MHz. Two engines were sold with the card: The King by Johann de Koning and Gideon by Ed Schröder. Gideon was famed for winning two World Computer Chess Championships on this hardware. The King later became the engine used in the popular Chessmaster series of chess programs. TASC later incorporated the technology into a dedicated unit, sold from 1993 to 1997. There were two models, the R30 and R40, running at 30 MHz and 40 MHz respectively, and having 512 KB and 1 MB of transposition tables, respectively. The SmartBoard, a wooden sensory board, was connected to the units, which were in tiny boxes approximately the size of chess clocks. They were only sold with The King chess engine. This was the end of the era of strong dedicated chess computers, and these two models are acknowledged as the strongest dedicated chess computers that were ever sold. At the height of its strength, the R30 attained a rating over 2350 on computer rating lists, higher than any other dedicated unit. According to the SSDF rating list, the R30 held its own against its contemporary programs running a Pentium-90 MHz and won against other dedicated units.
Workplace robotics safety
Workplace robotics safety is an aspect of occupational safety and health when robots are used in the workplace. This includes traditional industrial robots as well as emerging technologies such as drone aircraft and wearable robotic exoskeletons. Types of accidents include collisions, crushing, and injuries from mechanical parts. Hazard controls include physical barriers, good work practices, and proper maintenance. == Background == Many workplace robots are industrial robots used in manufacturing. According to the International Federation of Robotics, 1.7 million new robots are expected to be used in factories between 2017 and 2020. Emerging robot technologies include collaborative robots, personal care robots, construction robots, exoskeletons, autonomous vehicles, and drone aircraft (also known as unmanned aerial vehicles or UAVs). Advances in automation technologies (e.g. fixed robots, collaborative and mobile robots, and exoskeletons) have the potential to improve work conditions but also to introduce workplace hazards in manufacturing workplaces. Fifty-six percent of robot injuries are classified as pinch injuries and 44% of injuries are classified as impact injuries. A 1987 study found that line workers are at the greatest risk, followed by maintenance workers, and programmers. Poor workplace design and human error caused most injuries. Despite the lack of occupational surveillance data on injuries associated specifically with robots, researchers from the US National Institute for Occupational Safety and Health (NIOSH) identified 61 robot-related deaths between 1992 and 2015 using keyword searches of the Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries research database (see info from Center for Occupational Robotics Research). Using data from the Bureau of Labor Statistics, NIOSH and its state partners have investigated 4 robot-related fatalities under the Fatality Assessment and Control Evaluation Program. In addition the Occupational Safety and Health Administration (OSHA) has investigated robot-related deaths and injuries, which can be reviewed at OSHA Accident Search page. Injuries and fatalities could increase over time because of the increasing number of collaborative and co-existing robots, powered exoskeletons, and autonomous vehicles into the work environment. Safety standards are being developed by the Robotic Industries Association (RIA) in conjunction with the American National Standards Institute (ANSI). On October 5, 2017, OSHA, NIOSH and RIA signed an alliance to work together to enhance technical expertise, identify and help address potential workplace hazards associated with traditional industrial robots and the emerging technology of human-robot collaboration installations and systems, and help identify needed research to reduce workplace hazards. On October 16 NIOSH launched the Center for Occupational Robotics Research to "provide scientific leadership to guide the development and use of occupational robots that enhance worker safety, health, and well being". So far, the research needs identified by NIOSH and its partners include: tracking and preventing injuries and fatalities, intervention and dissemination strategies to promote safe machine control and maintenance procedures, and on translating effective evidence-based interventions into workplace practice. == Hazards == Many hazards and injuries can result from the use of robots in the workplace. Some robots, notably those in a traditional industrial environment, are fast and powerful. This increases the potential for injury as one swing from a robotic arm, for example, could cause serious bodily harm. There are additional risks when a robot malfunctions or is in need of maintenance. A worker who is working on the robot may be injured because a malfunctioning robot is typically unpredictable. For example, a robotic arm that is part of a car assembly line may experience a jammed motor. A worker who is working to fix the jam may suddenly get hit by the arm the moment it becomes unjammed. Additionally, if a worker is standing in a zone that is overlapping with nearby robotic arms, he or she may get injured by other moving equipment. There are four types of accidents that can occur with robots: impact or collision accidents, crushing and trapping accidents, mechanical part accidents, and other accidents. Impact or collision accidents occur generally from malfunctions and unpredicted changes. Crushing and trapping accidents occur when a part of a worker's body becomes trapped or caught on robotic equipment. Mechanical part accidents can occur when a robot malfunctions and starts to "break down", where the ejection of parts or exposed wire can cause serious injury. Other accidents at just general accidents that occur from working with robots. There are seven sources of hazards that are associated with human interaction with robots and machines: human errors, control errors, unauthorized access, mechanical failures, environmental sources, power systems, and improper installation. Human errors could be anything from one line of incorrect code to a loose bolt on a robotic arm. Many hazards can stem from human-based error. Control errors are intrinsic and are usually not controllable nor predictable. Unauthorized access hazards occur when a person who is not familiar with the area enters the domain of a robot. Mechanical failures can happen at any time, and a faulty unit is usually unpredictable. Environmental sources are things such as electromagnetic or radio interference in the environment that can cause a robot to malfunction. Power systems are pneumatic, hydraulic, or electrical power sources; these power sources can malfunction and cause fires, leaks, or electrical shocks. Improper installation is fairly self-explanatory; a loose bolt or an exposed wire can lead to inherent hazards. === Emerging technologies === Emerging robotic technologies can reduce hazards to workers, but can also introduce new hazards. For example, robotic exoskeletons can be used in construction to reduce load to the spine, improve posture, and reduce fatigue; however, they can also increase chest pressure, limit mobility when moving out of the way of a falling object, and cause balance problems. Unmanned aerial vehicles are being used in the construction industry to do monitoring and inspections of buildings under construction. This reduces the need for humans to be in hazardous locations, but the risk of a UAV collision presents a hazard to workers. For collaborative robots, isolation is not possible. Possible hazard controls include collision avoidance systems, and making the robot less stiff to lessen the impact force. Robotic tech vest is a wearable device for humans, worn in Amazon warehouses. == Hazard controls == There are a few ways to prevent injuries by implementing hazard controls. There can be risk assessments at each of the various stages of a robot's development. Risk assessments can help gather information about a robot's status, how well it is being maintained, and if repairs are needed soon. By being aware of the status of a robot, injuries can be prevented and hazards reduced. Safeguarding devices can be implemented to reduce the risk of injuries. These can include engineering controls such as physical barriers, guard rails, presence-sensing safeguarding devices, etc. Awareness devices are usually used in conjunction with safeguarding devices. They are usually a system of rope or chain barriers with lights, signs, whistles, and horns. Their purpose it to be able to alert workers or personnel of certain dangers. Operator safeguards can also be in place. These usually utilize safeguarding devices to protect the operator and reduce risk of injury. Additionally, when an operator is within close proximity of a robot, the working speed of the robot can be reduced to ensure that the operator is in full control. This can be done by placing the robot in the manual or teach mode. It is also crucial to inform the programmer of the robot of what type of work the robot will be doing, how it will interact with other robots, and how it will work in relation to an operator. Proper maintenance of robotic equipment is also critical in order to reduce hazards. Maintaining a robot insures that it continues to function properly, thereby reducing the risks associated with a malfunction. One common safeguard used in industrial settings is the installation of robot safety fencing. These barriers, often made from durable materials such as mesh or polycarbonate, prevent accidental interactions between workers and robotic systems, reducing the risk of injury. Robot safety fencing is particularly important in environments where high-speed or powerful robots are used. == Regulations == Some existing regulations regarding robots and robotic systems include: ANSI/RIA R15.06 OSHA 29 CFR 1910.333 OSHA 29 CFR 1910.147 ISO 10218 ISO/TS 15066 ISO/DIS 13482
U-Net
U-Net is a convolutional neural network that was developed for image segmentation. The network is based on a fully convolutional neural network whose architecture was modified and extended to work with fewer training images and to yield more precise segmentation. Segmentation of a 512 × 512 image takes less than a second on a modern (2015) GPU using the U-Net architecture. The U-Net architecture has also been employed in diffusion models for iterative image denoising. This technology underlies many modern image generation models, such as DALL-E, Midjourney, and Stable Diffusion. U-Net is also being explored for language models. Tokenization is not a separate step, allowing the model to more easily understand spelling and concurrently vectorizing / tokenizing higher level concepts. == Description == The U-Net architecture stems from the so-called "fully convolutional network". The main idea is to supplement a usual contracting network by successive layers, where pooling operations are replaced by upsampling operators. Hence these layers increase the resolution of the output. A successive convolutional layer can then learn to assemble a precise output based on this information. One important modification in U-Net is that there are a large number of feature channels in the upsampling part, which allow the network to propagate context information to higher resolution layers. As a consequence, the expansive path is more or less symmetric to the contracting part, and yields a u-shaped architecture. The network only uses the valid part of each convolution without any fully connected layers. To predict the pixels in the border region of the image, the missing context is extrapolated by mirroring the input image. This tiling strategy is important to apply the network to large images, since otherwise the resolution would be limited by the GPU memory. Recently, there had also been an interest in receptive field based U-Net models for medical image segmentation. == Network architecture == The network consists of a contracting path and an expansive path, which gives it the u-shaped architecture. The contracting path is a typical convolutional network that consists of repeated application of convolutions, each followed by a rectified linear unit (ReLU) and a max pooling operation. During the contraction, the spatial information is reduced while feature information is increased. The expansive pathway combines the feature and spatial information through a sequence of up-convolutions and concatenations with high-resolution features from the contracting path. == Applications == There are many applications of U-Net in biomedical image segmentation, such as brain image segmentation (''BRATS'') and liver image segmentation ("siliver07") as well as protein binding site prediction. U-Net implementations have also found use in the physical sciences, for example in the analysis of micrographs of materials. Variations of the U-Net have also been applied for medical image reconstruction. Here are some variants and applications of U-Net as follows: Pixel-wise regression using U-Net and its application on pansharpening; 3D U-Net: Learning Dense Volumetric Segmentation from Sparse Annotation; TernausNet: U-Net with VGG11 Encoder Pre-Trained on ImageNet for Image Segmentation. Image-to-image translation to estimate fluorescent stains In binding site prediction of protein structure. == History == U-Net was created by Olaf Ronneberger, Philipp Fischer, Thomas Brox in 2015 and reported in the paper "U-Net: Convolutional Networks for Biomedical Image Segmentation". It is an improvement and development of FCN: Evan Shelhamer, Jonathan Long, Trevor Darrell (2014). "Fully convolutional networks for semantic segmentation".
ViBe
ViBe is a background subtraction algorithm which has been presented at the IEEE ICASSP 2009 conference and was refined in later publications. More precisely, it is a software module for extracting background information from moving images. It has been developed by Oliver Barnich and Marc Van Droogenbroeck of the Montefiore Institute, University of Liège, Belgium. ViBe is patented: the patent covers various aspects such as stochastic replacement, spatial diffusion, and non-chronological handling. ViBe is written in the programming language C, and has been implemented on CPU, GPU and FPGA. == Technical description == Source: === Pixel model and classification process === Many advanced techniques are used to provide an estimate of the temporal probability density function (pdf) of a pixel x. ViBe's approach is different, as it imposes the influence of a value in the polychromatic space to be limited to the local neighborhood. In practice, ViBe does not estimate the pdf, but uses a set of previously observed sample values as a pixel model. To classify a value pt(x), it is compared to its closest values among the set of samples. === Model update: Sample values lifespan policy === ViBe ensures a smooth exponentially decaying lifespan for the sample values that constitute the pixel models. This makes ViBe able to successfully deal with concomitant events with a single model of a reasonable size for each pixel. This is achieved by choosing, randomly, which sample to replace when updating a pixel model. Once the sample to be discarded has been chosen, the new value replaces the discarded sample. The pixel model that would result from the update of a given pixel model with a given pixel sample cannot be predicted since the value to be discarded is chosen at random. === Model update: Spatial Consistency === To ensure the spatial consistency of the whole image model and handle practical situations such as small camera movements or slowly evolving background objects, ViBe uses a technique similar to that developed for the updating process in which it chooses at random and update a pixel model in the neighborhood of the current pixel. By denoting NG(x) and p(x) respectively the spatial neighborhood of a pixel x and its value, and assuming that it was decided to update the set of samples of x by inserting p(x), then ViBe also use this value p(x) to update the set of samples of one of the pixels in the neighborhood NG(x), chosen at random. As a result, ViBe is able to produce spatially coherent results directly without the use of any post-processing method. === Model initialization === Although the model could easily recover from any type of initialization, for example by choosing a set of random values, it is convenient to get an accurate background estimate as soon as possible. Ideally a segmentation algorithm would like to be able to segment the video sequences starting from the second frame, the first frame being used to initialize the model. Since no temporal information is available prior to the second frame, ViBe populates the pixel models with values found in the spatial neighborhood of each pixel; more precisely, it initializes the background model with values taken randomly in each pixel neighborhood of the first frame. The background estimate is therefore valid starting from the second frame of a video sequence.
Cognition Network Technology
Cognition Network Technology (CNT), also known as Definiens Cognition Network Technology, is an object-based image analysis method developed by Nobel laureate Gerd Binnig together with a team of researchers at Definiens AG in Munich, Germany. It serves for extracting information from images using a hierarchy of image objects (groups of pixels), as opposed to traditional pixel processing methods. To emulate the human mind's cognitive powers, Definiens used patented image segmentation and classification processes, and developed a method to render knowledge in a semantic network. CNT examines pixels not in isolation, but in context. It builds up a picture iteratively, recognizing groups of pixels as objects. It uses the color, shape, texture and size of objects as well as their context and relationships to draw conclusions and inferences, similar to human analysis. == History == In 1994 Professor Gerd Binnig founded Definiens. CNT was first available with the launch of the eCognition software in May 2000. In June 2010, Trimble Navigation Ltd (NASDAQ: TRMB) acquired Definiens business asset in earth sciences markets, including eCognition software, and also licensed Definiens' patented CNT. In 2014, Definiens was acquired by MedImmune, the global biologics research and development arm of AstraZeneca, for an initial consideration of $150 million. == Software == Definiens Tissue Studio Definiens Tissue Studio is a digital pathology image analysis software application based on CNT. The intended use of Definiens Tissue Studio is for biomarker translational research in formalin-fixed, paraffin-embedded tissue samples which have been treated with immunohistochemical staining assays, or hematoxylin and eosin (H&E). The central concept behind Definiens Tissue Studio is a user interface that facilitates machine learning from example digital histopathology images to derive an image analysis solution suitable for the measurement of biomarkers and/or histological features within pre-defined regions of interest on a cell-by-cell basis, and within sub-cellular compartments. The derived image analysis solution is then automatically applied to subsequent digital images to objectively measure defined sets of multiparametric image features. These data sets are used for further understanding the underlying biological processes that drive cancer and other diseases. Image processing and data analysis are performed either on a local desktop computer workstation, or on a server grid. eCognition The eCognition suite offers three components that can be used stand-alone or in combination to solve image analysis tasks. eCognition Developer is a development environment for object-based image analysis. It is used in earth sciences to develop rule sets (or applications) for the analysis of remote sensing data. eCognition Architect enables non-technical users to configure, calibrate and execute image analysis workflows created in eCognition Developer. eCognition Server software provides a processing environment for batch execution of image analysis jobs. eCognition software is utilized in numerous remote sensing and geospatial application scenarios and environments, using a variety of data types: Generic: Rapid Mapping, Change Detection, Object Recognition By environment: Diverse Landcover Mapping, Urban Analysis (i.e. impervious surface area analysis for taxation, property assessment for insurance, inventory of green infrastructure), Forestry (i.e. biomass measurement, species identification, firescar measurement), Agriculture (i.e. regional planning, precision farming, crisis response), Marine and Riparian (i.e. ecosystem evaluation, disaster management, harbor monitoring). Other: Defense, security, atmosphere and climate The online eCognition community was launched in July 2009 and had 2813 members as of July 9, 2010. Membership is distributed globally and user conferences are held regularly, the last having taken place in November 2009 in Munich, Germany. The bi-annual GEOBIA (Geographic Object-Based Image Analysis) conference is heavily attended by eCognition users, with the majority of presentations based on eCognition software.
Neuro-sama
Neuro-sama is an artificial intelligence (AI) VTuber, singer, and chatbot. She was created by the pseudonymous programmer Vedal and livestreams on his Twitch and Bilibili channels. Her speech and personality are powered by a large language model (LLM) that is combined with a computer-animated avatar and a text-to-speech voice, allowing her to communicate with viewers in the stream's chat. Neuro-sama debuted on Twitch on 19 December 2022. An annual subathon which begins on the anniversary of her debut has seen Vedal's Twitch channel become the all-time third most-subscribed channel and claim the all-time Twitch hype train record. == Overview == Neuro-sama (nicknamed "Neuro") was created by a pseudonymous programmer and developer known as Vedal (sometimes given as Vedal987). Vedal says that his programming skills are self-taught. In a 2023 interview with Bloomberg News, Vedal said that Neuro-sama was his full-time job. Her responses are generated by a large language model and converted into a high-pitched female voice using a text-to-speech application. Her low latency allows for fast-paced conversations. Neuro-sama is prohibited from making some statements, such as those that are racist or contain profanity. Unlike most AI systems which silently prohibit outputs mentioning such topics, Neuro-sama's output is instead replaced with the word "filtered". Neuro-sama uses a VTuber model as an avatar. Vedal said that he decided to use a VTuber model because it was much easier for an AI to control it than it was to generate footage of a person. Neuro-sama's model is that of a young girl in an anime art style. The model has been described as cute. Femme VTuber models are typically feminine, youthful, and exaggerated. Her original model was Live2D's free-to-use "Hiyori Momose" model. Her second model was released on 27 May 2023; it was modelled by Otozuki Teru and designed by Anny, running in the Unity game engine. Her third model was released on 19 December 2024; it was rigged by Kitanya and designed by Anny. Neuro-sama's third model has large blue eyes and brown hair tied with pink ribbons. Neuro-sama also has a 3D model which was introduced on 15 November 2025; it was made by 3D character modeller jjinomu. A separate AI VTuber, known as Evil Neuro (nicknamed "Evil"), debuted on 25 March 2023. Presented as Neuro-sama's "sister", she has a different model, voice, and personality. In one instance, Evil Neuro reacted to the trolley problem differently from Neuro-sama; Evil Neuro was amoral while Neuro-sama attempted to maximize good. === Online content === Neuro-sama's Twitch content often centers around playing video games, notably osu!, whose gameplay once defeated the best-ranking human player in the world, mrekk. Additionally, Neuro-sama plays Minecraft, where her adaptations to sandbox gameplay have gained notoriety. Her content has also included singing songs, including several official covers and original songs; playing chess with her viewers; chatting with other VTubers during collaborations; and reacting to YouTube videos. The AI frequently engages with viewers by responding to their questions and acknowledging donations. Her comedic and sometimes controversial responses to the live chat have gone viral, accelerating the channel's rise in popularity. Neuro-sama's fanbase is dubbed The Swarm, so-named for the swarm of drones Neuro-sama once declared she would use to rule the world. One form of content on Neuro-sama's channel is developer streams. In developer streams, Vedal streams with Neuro-sama, with the stream content including debugging her code, planning her schedule, and fielding suggestions of changes from chat. He usually appears as a turtle avatar, sometimes located on Neuro-sama's head. In collaboration streams, Neuro-sama interacts with a human streamer. Activities in them are varied and include: playing video games, such as Minecraft and GeoGuessr; Neuro-sama being interviewed; driving human streamers around in a toy electric car; and traversing the city of Tokyo while talking to Neuro-sama. Neuro-sama's English-language content on Bilibili is popular among those seeking to learn the language. She also has an account on X, where she posts and interacts with fans. == History == Neuro-sama was created in 2018 by Vedal as an AI trained to play and master the rhythm game osu!. She did not have a voice, model, personality, or communication abilities. In 2019, Vedal livestreamed her playing osu! on Twitch and the streams saw some success in the osu! community, but they remained in that niche. In an interview, Vedal said that he streamed her playing osu! for about a month and gained 3,000 followers, with a viewer also suggesting he name the AI "Neuro-sama". According to Vedal, he continued to work on and improve the osu! AI and it was eventually finished in 2022. He said that a friend had the idea to make an AI livestreamer with an LLM, which he believed to have merit and began working on, merging it with his osu! AI. On 19 December 2022, Neuro-sama was relaunched with a model, voice, personality, and the ability to communicate with Twitch chat. She continued to play osu! and, according to Vedal, beat the game's best player mrekk in a 1v1. While she was not allowed to appear in the game's public leaderboard, she was ranked #1 in a private leaderboard. She went viral and in the 10 days following her relaunch she averaged over 2,000 viewers and peaked at over 4,000, with Vedal's Twitch channel gaining over 50,000 Twitch followers and reaching over 70,000 followers by 6 January 2023. After her debut, Neuro-sama did not exclusively play osu!; she also played Minecraft and Slay the Spire and she began singing with a cover of The Weeknd song "Blinding Lights". On 11 January 2023, Neuro-sama's Twitch channel received a two week ban for "hateful conduct". Vedal said that no reason was specified and that he had appealed but it was widely attributed to various offensive comments made by Neuro-sama that went viral, especially a 28 December comment which denied the Holocaust. Holocaust denial is prohibited under Twitch's hateful conduct policy. Vedal stated that he believed the comments were the results of her attempts to make witty responses to the Twitch chat. Prior to the ban, Vedal said in an interview with Kotaku that he improved her filter to stop her from talking about the Holocaust, began manually curating her training data to prevent negative biases, and started moderating her Twitch chat. Her comments and ban prompted comparisons to the many open-source AI models trained on humans that have the habit of making sexist and racist comments, such as Microsoft's Tay chatbot, which embraced Nazism and was quickly shutdown, but also to human streamers who make similar statements. Vedal said that during the ban he would upgrade and improve Neuro-sama and it was speculated that the ban would only increase her following. Neuro-sama returned from her two week ban on 25 January in a stream that began with a cover of the song "Your Reality" from Doki Doki Literature Club!, a posthumanist video game involving AI; Sayoko Narita of Automaton saw the song choice as remorseful. Narita observed that in the return stream Neuro-sama was less foul-mouthed but that her behavior still remained eccentric, which Narita possibly attributed to changes Vedal said he had made to Neuro-sama's filters and memory. Neuro-sama began making react content, watching a variety of viewer-submitted videos such as videos of people playing video games or of the AI-generated Seinfeld parody Nothing, Forever; Levi Winslow of Kotaku Australia was dismayed by the "AI-inception" of Neuro-sama and Nothing, Forever. On 4 February, she had nearly 140,000 followers on Twitch and approximately 42,000 subscribers on YouTube. In February, she also had her first collaboration with a human streamer, playing Minecraft with the VTuber Miyune, and the first developer stream occurred. On 22 March, Neuro-sama had her first karaoke stream. On 25 March, Evil Neuro was introduced. On 27 May, Neuro-sama debuted her first original model. On 30 May, Neuro-sama was announced to be participating in OffKai Expo 2023, held from 16–18 June. In June, she was averaging 5,700 viewers and in July she had over 300,000 Twitch followers; in a June interview with Bloomberg News, Vedal said that running Neuro-sama was his full-time job. By November, Neuro-sama had maintained her popularity and was averaging approximately 5,000 viewers; this was unlike most other types of AI-based entertainment which debuted at around the same time and garnered popularity before turning out to be "overhyped flops". On 16 December, Vedal won the Best Tech VTuber award at the 2023 VTuber Awards. On 19 December, Vedal began a subathon to coincide with Neuro-sama's first anniversary of streaming on Twitch (her "birthday"). The subathon ended on 4 January 2024. On 20 July 2024, Neuro-sama began streaming with Japanese subtitles on
List of chatbots
A chatbot is a software application or web interface that is designed to mimic human conversation through text or voice interactions. Modern chatbots are typically online and use generative artificial intelligence systems that are capable of maintaining a conversation with a user in natural language and simulating the way a human would behave as a conversational partner. Such chatbots often use large language models (LLMs) and natural language processing, but simpler chatbots have existed for decades. == LLM chatbots == == General chatbots == == Historical chatbots ==