A digital signal is a signal that represents data as a sequence of discrete values; at any given time it can only take on, at most, one of a finite number of values. This contrasts with an analog signal, which represents continuous values; at any given time it represents a real number within an infinite set of values. Simple digital signals represent information in discrete bands of levels. All levels within a band of values represent the same information state. In most digital circuits, the signal can have two possible valid values; this is called a binary signal or logic signal. They are represented by two voltage bands: one near a reference value (typically termed as ground or zero volts), and the other a value near the supply voltage. These correspond to the two values zero and one (or false and true) of the Boolean domain, so at any given time a binary signal represents one binary digit (bit). Because of this discretization, relatively small changes to the signal levels do not leave the discrete envelope, and as a result are ignored by signal state sensing circuitry. As a result, digital signals have noise immunity; electronic noise, provided it is not too great, will not affect digital circuits, whereas noise always degrades the operation of analog signals to some degree. Digital signals having more than two states are occasionally used; circuitry using such signals is called multivalued logic. For example, signals that can assume three possible states are called three-valued logic. In a digital signal, the physical quantity representing the information may be a variable electric current or voltage, the intensity, phase or polarization of an optical or other electromagnetic field, acoustic pressure, the magnetization of a magnetic storage media, etcetera. Digital signals are used in all digital electronics, notably computing equipment and data transmission. == Definitions == The term digital signal has related definitions in different contexts. === In digital electronics === In digital electronics, a digital signal is a pulse amplitude modulated signal, i.e., a sequence of fixed-width electrical pulses or light pulses, each occupying one of a discrete number of levels of amplitude. A special case is a logic signal or a binary signal, which varies between a low and a high signal level. The pulse trains in digital circuits are typically generated by metal–oxide–semiconductor field-effect transistor (MOSFET) devices, due to their rapid on–off electronic switching speed and large-scale integration (LSI) capability. In contrast, bipolar junction transistors more slowly generate signals resembling sine waves. === In signal processing === In digital signal processing, a digital signal is a representation of a physical signal that is sampled and quantized. A digital signal is an abstraction that is discrete in time and amplitude. The signal's value only exists at regular time intervals, since only the values of the corresponding physical signal at those sampled moments are significant for further digital processing. The digital signal is a sequence of codes drawn from a finite set of values. The digital signal may be stored, processed or transmitted physically as a pulse-code modulation (PCM) signal. === In communications === In digital communications, a digital signal is a continuous-time physical signal, alternating between a discrete number of waveforms, representing a bitstream. The shape of the waveform depends on the transmission scheme, which may be either a line coding scheme allowing baseband transmission; or a digital modulation scheme, allowing passband transmission over long wires or over a limited radio frequency band. Such a carrier-modulated sine wave is considered a digital signal in literature on digital communications and data transmission, but considered as a bit stream converted to an analog signal in specific cases where the signal will be carried over a system meant for analog communication, such as an analog telephone line. In communications, sources of interference are usually present, and noise is frequently a significant problem. The effects of interference are typically minimized by filtering off interfering signals as much as possible and by using data redundancy. The main advantages of digital signals for communications are often considered to be noise immunity, and the ability, in many cases such as with audio and video data, to use data compression to greatly decrease the bandwidth that is required on the communication media. == Logic voltage levels == A waveform that switches representing the two states of a Boolean value (0 and 1, or low and high, or false and true) is referred to as a digital signal or logic signal or binary signal when it is interpreted in terms of only two possible digits. The two states are usually represented by some measurement of an electrical property: Voltage is the most common, but current is used in some logic families. Two ranges of voltages are typically defined for each logic family, which are frequently not directly adjacent. The signal is low when in the low range and high when in the high range, and in between the two ranges the behavior can vary between different types of gates. The clock signal is a special digital signal that is used to synchronize many digital circuits. The image shown can be considered the waveform of a clock signal. Logic changes are triggered either by the rising edge or the falling edge. The rising edge is the transition from a low voltage (level 1 in the diagram) to a high voltage (level 2). The falling edge is the transition from a high voltage to a low one. Although in a highly simplified and idealized model of a digital circuit, we may wish for these transitions to occur instantaneously, no real-world circuit is purely resistive, and therefore no circuit can instantly change voltage levels. This means that during a short, finite transition time, the output may not properly reflect the input, and will not correspond to either a logically high or low voltage. == Modulation == To create a digital signal, a signal must be modulated with a control signal to produce it. The simplest modulation, a type of unipolar encoding, is simply to switch on and off a DC signal so that high voltages represent a '1' and low voltages are '0'. In digital radio schemes, one or more carrier waves are amplitude, frequency or phase modulated by the control signal to produce a digital signal suitable for transmission. Asymmetric Digital Subscriber Line (ADSL) over telephone wires, does not primarily use binary logic; the digital signals for individual carriers are modulated with different-valued logics, depending on the Shannon capacity of the individual channel. == Clocking == Digital signals may be sampled by a clock signal at regular intervals by passing the signal through a flip-flop. When this is done, the input is measured at the clock edge and the signal from that time. The signal is then held steady until the next clock. This process is the basis of synchronous logic. Asynchronous logic also exists, which uses no single clock, and generally operates more quickly, and may use less power, but is significantly harder to design.
Cheekd
Cheekd is a dating app based in New York City. It was founded in 2010 by Lori Cheek. == History == The service debuted with the name "Cheek'd". Founder Lori Cheek appeared on the television program, Shark Tank in February 2014, but did not succeed in obtaining funding from any of the five judges. She said Cheek’d only had 1000 subscribers at that time. === Business card model === Cheek'd offered two plans, paid and free. For $25, subscribers got a set of 50 business cards that could be given out once someone caught their eye. Each card had a phrase, an online code, and a URL to the subscriber's account. Recipients could look up the giver's profile. In addition to purchasing cards, there was a $9.95 monthly membership fee. === Smartphone app === In 2015, the service's name changed from "Cheek'd" to "Cheekd". The new app used Bluetooth technology to alert users whenever a compatible user was within a 30-foot radius, instead of using cards. == Patent lawsuit == The original business card-based model for Cheekd had been claimed as a patented process by Lori Cheek, as U.S. patent 8,543,465. In September 2017, a complaint was filed, alleging that the idea was not original to Lori Cheek. Cheek responded, stating that the complaint was baseless, and a complete fabrication. The lawsuit Pirri v. Cheek was dismissed in a pre-trial conference in New York's Federal Court on April 5, 2018.
Online analytical processing
In computing, online analytical processing (OLAP) (), is an approach to quickly answer multi-dimensional analytical (MDA) queries. The term OLAP was created as a slight modification of the traditional database term online transaction processing (OLTP). OLAP is part of the broader category of business intelligence, which also encompasses relational databases, report writing and data mining. Typical applications of OLAP include business reporting for sales, marketing, management reporting, business process management (BPM), budgeting and forecasting, financial reporting and similar areas, with new applications emerging, such as agriculture. OLAP tools enable users to analyse multidimensional data interactively from multiple perspectives. OLAP consists of three basic analytical operations: consolidation (roll-up), drill-down, and slicing and dicing. Consolidation involves the aggregation of data that can be accumulated and computed in one or more dimensions. For example, all sales offices are rolled up to the sales department or sales division to anticipate sales trends. By contrast, the drill-down is a technique that allows users to navigate through the details. For instance, users can view the sales by individual products that make up a region's sales. Slicing and dicing is a feature whereby users can take out (slicing) a specific set of data of the OLAP cube and view (dicing) the slices from different viewpoints. These viewpoints are sometimes called dimensions (such as looking at the same sales by salesperson, or by date, or by customer, or by product, or by region, etc.). Databases configured for OLAP use a multidimensional data model, allowing for complex analytical and ad hoc queries with a rapid execution time. They borrow aspects of navigational databases, hierarchical databases and relational databases. OLAP is typically contrasted to OLTP (online transaction processing), which is generally characterized by much less complex queries, in a larger volume, to process transactions rather than for the purpose of business intelligence or reporting. Whereas OLAP systems are mostly optimized for read, OLTP has to process all kinds of queries (read, insert, update and delete). == Overview of OLAP systems == At the core of any OLAP system is an OLAP cube (also called a 'multidimensional cube' or a hypercube). It consists of numeric facts called measures that are categorized by dimensions. The measures are placed at the intersections of the hypercube, which is spanned by the dimensions as a vector space. The usual interface to manipulate an OLAP cube is a matrix interface, like Pivot tables in a spreadsheet program, which performs projection operations along the dimensions, such as aggregation or averaging. The cube metadata is typically created from a star schema or snowflake schema or fact constellation of tables in a relational database. Measures are derived from the records in the fact table and dimensions are derived from the dimension tables. Each measure can be thought of as having a set of labels, or meta-data associated with it. A dimension is what describes these labels; it provides information about the measure. A simple example would be a cube that contains a store's sales as a measure, and Date/Time as a dimension. Each Sale has a Date/Time label that describes more about that sale. For example: Sales Fact Table +-------------+----------+ | sale_amount | time_id | +-------------+----------+ Time Dimension | 930.10| 1234 |----+ +---------+-------------------+ +-------------+----------+ | | time_id | timestamp | | +---------+-------------------+ +---->| 1234 | 20080902 12:35:43 | +---------+-------------------+ === Multidimensional databases === Multidimensional structure is defined as "a variation of the relational model that uses multidimensional structures to organize data and express the relationships between data". The structure is broken into cubes and the cubes are able to store and access data within the confines of each cube. "Each cell within a multidimensional structure contains aggregated data related to elements along each of its dimensions". Even when data is manipulated it remains easy to access and continues to constitute a compact database format. The data still remains interrelated. Multidimensional structure is quite popular for analytical databases that use online analytical processing (OLAP) applications. Analytical databases use these databases because of their ability to deliver answers to complex business queries swiftly. Data can be viewed from different angles, which gives a broader perspective of a problem unlike other models. === Aggregations === It has been claimed that for complex queries OLAP cubes can produce an answer in around 0.1% of the time required for the same query on OLTP relational data. The most important mechanism in OLAP which allows it to achieve such performance is the use of aggregations. Aggregations are built from the fact table by changing the granularity on specific dimensions and aggregating up data along these dimensions, using an aggregate function (or aggregation function). The number of possible aggregations is determined by every possible combination of dimension granularities. The combination of all possible aggregations and the base data contains the answers to every query which can be answered from the data. Because usually there are many aggregations that can be calculated, often only a predetermined number are fully calculated; the remainder are solved on demand. The problem of deciding which aggregations (views) to calculate is known as the view selection problem. View selection can be constrained by the total size of the selected set of aggregations, the time to update them from changes in the base data, or both. The objective of view selection is typically to minimize the average time to answer OLAP queries, although some studies also minimize the update time. View selection is NP-complete. Many approaches to the problem have been explored, including greedy algorithms, randomized search, genetic algorithms and A search algorithm. Some aggregation functions can be computed for the entire OLAP cube by precomputing values for each cell, and then computing the aggregation for a roll-up of cells by aggregating these aggregates, applying a divide and conquer algorithm to the multidimensional problem to compute them efficiently. For example, the overall sum of a roll-up is just the sum of the sub-sums in each cell. Functions that can be decomposed in this way are called decomposable aggregation functions, and include COUNT, MAX, MIN, and SUM, which can be computed for each cell and then directly aggregated; these are known as self-decomposable aggregation functions. In other cases, the aggregate function can be computed by computing auxiliary numbers for cells, aggregating these auxiliary numbers, and finally computing the overall number at the end; examples include AVERAGE (tracking sum and count, dividing at the end) and RANGE (tracking max and min, subtracting at the end). In other cases, the aggregate function cannot be computed without analyzing the entire set at once, though in some cases approximations can be computed; examples include DISTINCT COUNT, MEDIAN, and MODE; for example, the median of a set is not the median of medians of subsets. These latter are difficult to implement efficiently in OLAP, as they require computing the aggregate function on the base data, either computing them online (slow) or precomputing them for possible rollouts (large space). == Types == OLAP systems have been traditionally categorized using the following taxonomy. === Multidimensional OLAP (MOLAP) === MOLAP (multi-dimensional online analytical processing) is the classic form of OLAP and is sometimes referred to as just OLAP. MOLAP stores this data in an optimized multi-dimensional array storage, rather than in a relational database. Some MOLAP tools require the pre-computation and storage of derived data, such as consolidations – the operation known as processing. Such MOLAP tools generally utilize a pre-calculated data set referred to as a data cube. The data cube contains all the possible answers to a given range of questions. As a result, they have a very fast response to queries. On the other hand, updating can take a long time depending on the degree of pre-computation. Pre-computation can also lead to what is known as data explosion. Other MOLAP tools, particularly those that implement the functional database model do not pre-compute derived data but make all calculations on demand other than those that were previously requested and stored in a cache. Advantages of MOLAP Fast query performance due to optimized storage, multidimensional indexing and caching. Smaller on-disk size of data compared to data stored in relational database due to compression techniques. Automated computation of higher-level aggregates of the data. It is very compact for low dimension data se
Ontology merging
Ontology merging defines the act of bringing together two conceptually divergent ontologies or the instance data associated to two ontologies. This is similar to work in database merging (schema matching). This merging process can be performed in a number of ways, manually, semi automatically, or automatically. Manual ontology merging although ideal is extremely labour-intensive and current research attempts to find semi or entirely automated techniques to merge ontologies. These techniques are statistically driven often taking into account similarity of concepts and raw similarity of instances through textual string metrics and semantic knowledge. These techniques are similar to those used in information integration employing string metrics from open source similarity libraries.
Higuchi dimension
In fractal geometry, the Higuchi dimension (or Higuchi fractal dimension (HFD)) is an approximate value for the box-counting dimension of the graph of a real-valued function or time series. This value is obtained via an algorithmic approximation so one also talks about the Higuchi method. It has many applications in science and engineering and has been applied to subjects like characterizing primary waves in seismograms, clinical neurophysiology and analyzing changes in the electroencephalogram in Alzheimer's disease. == Formulation of the method == The original formulation of the method is due to T. Higuchi. Given a time series X : { 1 , … , N } → R {\displaystyle X:\{1,\dots ,N\}\to \mathbb {R} } consisting of N {\displaystyle N} data points and a parameter k m a x ≥ 2 {\displaystyle k_{\mathrm {max} }\geq 2} the Higuchi Fractal dimension (HFD) of X {\displaystyle X} is calculated in the following way: For each k ∈ { 1 , … , k m a x } {\displaystyle k\in \{1,\dots ,k_{\mathrm {max} }}\} and m ∈ { 1 , … , k } {\displaystyle m\in \{1,\dots ,k}\} define the length L m ( k ) {\displaystyle L_{m}(k)} by L m ( k ) = N − 1 ⌊ N − m k ⌋ k 2 ∑ i = 1 ⌊ N − m k ⌋ | X N ( m + i k ) − X N ( m + ( i − 1 ) k ) | . {\displaystyle L_{m}(k)={\frac {N-1}{\lfloor {\frac {N-m}{k}}\rfloor k^{2}}}\sum _{i=1}^{\lfloor {\frac {N-m}{k}}\rfloor }|X_{N}(m+ik)-X_{N}(m+(i-1)k)|.} The length L ( k ) {\displaystyle L(k)} is defined by the average value of the k {\displaystyle k} lengths L 1 ( k ) , … , L k ( k ) {\displaystyle L_{1}(k),\dots ,L_{k}(k)} , L ( k ) = 1 k ∑ m = 1 k L m ( k ) . {\displaystyle L(k)={\frac {1}{k}}\sum _{m=1}^{k}L_{m}(k).} The slope of the best-fitting linear function through the data points { ( log 1 k , log L ( k ) ) } {\displaystyle \left\{\left(\log {\frac {1}{k}},\log L(k)\right)\right\}} is defined to be the Higuchi fractal dimension of the time-series X {\displaystyle X} . == Application to functions == For a real-valued function f : [ 0 , 1 ] → R {\displaystyle f:[0,1]\to \mathbb {R} } one can partition the unit interval [ 0 , 1 ] {\displaystyle [0,1]} into N {\displaystyle N} equidistantly intervals [ t j , t j + 1 ) {\displaystyle [t_{j},t_{j+1})} and apply the Higuchi algorithm to the times series X ( j ) = f ( t j ) {\displaystyle X(j)=f(t_{j})} . This results into the Higuchi fractal dimension of the function f {\displaystyle f} . It was shown that in this case the Higuchi method yields an approximation for the box-counting dimension of the graph of f {\displaystyle f} as it follows a geometrical approach (see Liehr & Massopust 2020). == Robustness and stability == Applications to fractional Brownian functions and the Weierstrass function reveal that the Higuchi fractal dimension can be close to the box-dimension. On the other hand, the method can be unstable in the case where the data X ( 1 ) , … , X ( N ) {\displaystyle X(1),\dots ,X(N)} are periodic or if subsets of it lie on a horizontal line (see Liehr & Massopust 2020).
Reflection (computer graphics)
Reflection in computer graphics is used to render reflective objects like mirrors and shiny surfaces. Accurate reflections are commonly computed using ray tracing whereas approximate reflections can usually be computed faster by using simpler methods such as environment mapping. Reflections on shiny surfaces like wood or tile can add to the photorealistic effects of a 3D rendering. == Approaches to reflection rendering == For rendering environment reflections there exist many techniques that differ in precision, computational and implementation complexity. Combination of these techniques are also possible. Image order rendering algorithms based on tracing rays of light, such as ray tracing or path tracing, typically compute accurate reflections on general surfaces, including multiple reflections and self reflections. However these algorithms are generally still too computationally expensive for real time rendering (even though specialized HW exists, such as Nvidia RTX) and require a different rendering approach from typically used rasterization. Reflections on planar surfaces, such as planar mirrors or water surfaces, can be computed simply and accurately in real time with two pass rendering — one for the viewer, one for the view in the mirror, usually with the help of stencil buffer. Some older video games used a trick to achieve this effect with one pass rendering by putting the whole mirrored scene behind a transparent plane representing the mirror. Reflections on non-planar (curved) surfaces are more challenging for real time rendering. Main approaches that are used include: Environment mapping (e.g. cube mapping): a technique that has been widely used e.g. in video games, offering reflection approximation that's mostly sufficient to the eye, but lacking self-reflections and requiring pre-rendering of the environment map. The precision can be increased by using a spatial array of environment maps instead of just one. It is also possible to generate cube map reflections in real time, at the cost of memory and computational requirements. Screen space reflections (SSR): a more expensive technique that traces rays come from pixel data.This requires the data of surface normal and either depth buffer (local space) or position buffer (world space).The disadvantage is that objects not captured in the rendered frame cannot appear in the reflections, which results in unresolved and or false intersections causing artefacts such as reflection vanishment and virtual image. SSR was originally introduced as Real Time Local Reflections in CryENGINE 3. == Types of reflection == Polished - A polished reflection is an undisturbed reflection, like a mirror or chrome surface. Blurry - A blurry reflection means that tiny random bumps, or microfacets, on the surface of the material causes the reflection to be blurry. Metallic - A reflection is metallic if the highlights and reflections retain the color of the reflective object. Glossy - This term can be misused: sometimes, it is a setting which is the opposite of blurry (e.g. when "glossiness" has a low value, the reflection is blurry). Sometimes the term is used as a synonym for "blurred reflection". Glossy used in this context means that the reflection is actually blurred. === Polished or mirror reflection === Mirrors are usually almost 100% reflective. === Metallic reflection === Normal (nonmetallic) objects reflect light and colors in the original color of the object being reflected. Metallic objects reflect lights and colors altered by the color of the metallic object itself. === Blurry reflection === Many materials are imperfect reflectors, where the reflections are blurred to various degrees due to surface roughness that scatters the rays of the reflections. === Glossy reflection === Fully glossy reflection, shows highlights from light sources, but does not show a clear reflection from objects. == Examples of reflections == === Wet floor reflections === The wet floor effect is a graphic effects technique popular in conjunction with Web 2.0 style pages, particularly in logos. The effect can be done manually or created with an auxiliary tool which can be installed to create the effect automatically. Unlike a standard computer reflection (and the Java water effect popular in first-generation web graphics), the wet floor effect involves a gradient and often a slant in the reflection, so that the mirrored image appears to be hovering over or resting on a wet floor.
Materials informatics
Materials informatics is a field of study that applies the principles of informatics and data science to materials science and engineering to improve the understanding, use, selection, development, and discovery of materials. The term "materials informatics" is frequently used interchangeably with "data science", "machine learning", and "artificial intelligence" by the community. This is an emerging field, with a goal to achieve high-speed and robust acquisition, management, analysis, and dissemination of diverse materials data with the goal of greatly reducing the time and risk required to develop, produce, and deploy new materials, which generally takes longer than 20 years. This field of endeavor is not limited to some traditional understandings of the relationship between materials and information. Some more narrow interpretations include combinatorial chemistry, process modeling, materials databases, materials data management, and product life cycle management. Materials informatics is at the convergence of these concepts, but also transcends them and has the potential to achieve greater insights and deeper understanding by applying lessons learned from data gathered on one type of material to others. By gathering appropriate meta data, the value of each individual data point can be greatly expanded. == Databases == Databases are essential for any informatics research and applications. In material informatics many databases exist containing both empirical data obtained experimentally, and theoretical data obtained computationally. Big data that can be used for machine learning is particularly difficult to obtain for experimental data due to the lack of a standard for reporting data and the variability in the experimental environment. This lack of big data has led to growing effort in developing machine learning techniques that utilize data extremely data sets. On the other hand, large uniform database of theoretical density functional theory (DFT) calculations exists. These databases have proven their utility in high-throughput material screening and discovery. Some common DFT databases and high throughput tools are listed below: Databases: MaterialsProject.org, MaterialsWeb.org (University of Florida) HT software: Pymatgen, MPInterfaces, Matminer == Beyond computational methods? == The concept of materials informatics is addressed by the Materials Research Society. For example, materials informatics was the theme of the December 2006 issue of the MRS Bulletin. The issue was guest-edited by John Rodgers of Innovative Materials, Inc., and David Cebon of Cambridge University, who described the "high payoff for developing methodologies that will accelerate the insertion of materials, thereby saving millions of investment dollars." The editors focused on the limited definition of materials informatics as primarily focused on computational methods to process and interpret data. They stated that "specialized informatics tools for data capture, management, analysis, and dissemination" and "advances in computing power, coupled with computational modeling and simulation and materials properties databases" will enable such accelerated insertion of materials. A broader definition of materials informatics goes beyond the use of computational methods to carry out the same experimentation, viewing materials informatics as a framework in which a measurement or computation is one step in an information-based learning process that uses the power of a collective to achieve greater efficiency in exploration. When properly organized, this framework crosses materials boundaries to uncover fundamental knowledge of the basis of physical, mechanical, and engineering properties. == Challenges == While there are many who believe in the future of informatics in the materials development and scaling process, many challenges remain. Hill, et al., write that "Today, the materials community faces serious challenges to bringing about this data-accelerated research paradigm, including diversity of research areas within materials, lack of data standards, and missing incentives for sharing, among others. Nonetheless, the landscape is rapidly changing in ways that should benefit the entire materials research enterprise." This remaining tension between traditional materials development methodologies and the use of more computationally, machine learning, and analytics approaches will likely exist for some time as the materials industry overcomes some of the cultural barriers necessary to fully embrace such new ways of thinking. == Analogy from Biology == The overarching goals of bioinformatics and systems biology may provide a useful analogy. Andrew Murray of Harvard University expresses the hope that such an approach "will save us from the era of "one graduate student, one gene, one PhD". Similarly, the goal of materials informatics is to save us from one graduate student, one alloy, one PhD. Such goals will require more sophisticated strategies and research paradigms than applying data-science methods to the same tasks set currently undertaken by students.