AI Art Keywords

AI Art Keywords — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Deep tomographic reconstruction

  Deep Tomographic Reconstruction is a set of methods for using deep learning methods to perform tomographic reconstruction of medical and industrial images. It uses artificial intelligence and machine learning, especially deep artificial neural networks or deep learning, to overcome challenges such as measurement noise, data sparsity, image artifacts, and computational inefficiency. This approach has been applied across various imaging modalities, including CT, MRI, PET, SPECT, ultrasound, and optical imaging == Historical background == Traditional tomographic reconstruction relies on analytic methods such as filtered back-projection, or iterative methods which incrementally compute inverse transformations from measurement data (e.g., Radon or Fourier transform data). However, these approaches are not sufficient for certain imaging techniques such as low-dose CT and fast MRI, or scenarios involving metal artifacts and patient motion. == Use in imaging modalities == === Computed tomography (CT) === In CT, deep learning models can be particularly effective in reducing radiation exposure while maintaining image quality. Deep neural networks can also be able to reconstruct images of fair quality from sparsely sampled data without sacrificing diagnostic performance. Deep learning-based generative AI models can reduce CT metal artifacts. === Magnetic resonance imaging (MRI) === In magnetic resonance imaging (MRI), deep learning can lead to reduced MRI motion artifacts, and increased acquisition speed, referred to as fast MRI. Despite suffering from disadvantages such as lower signal-to-noise ratio (SNR), deep learning can enhance image quality in low field MRI, making these systems clinically viable. === Positron emission tomography (PET) and single-photon emission CT (SPECT) === For PET imaging, deep learning models can provide substantial improvements in low-dose imaging and motion artifact correction. Also, deep learning can help SPECT for generation of attenuation background. A notable technique for PET denoising involves integrating MR data through multimodal networks, which use anatomical information from MRI to enhance PET image quality. === Ultrasound imaging === Deep learning can enhance ultrasound imaging by reducing speckle noise and motion blur. For ultrasound beamforming, deep neural networks can allow superior image quality with limited data at high speed. === Optical imaging and microscopy === Diffuse optical tomography, optical coherence tomography and microscopy can be improved by deep neural networks beyond traditional methods. Furthermore, deep learning can also enhance Photoacoustic imaging (see Deep learning in photoacoustic imaging), addressing challenges like high noise, low contrast, and limited resolution. Deep learning has also been applied to label-free live-cell imaging, where convolutional neural networks predict fluorescence labels from transmitted light images, a technique known as in silico labeling. This method can enable high-throughput, non-invasive cell analysis and phenotyping without the need for traditional fluorescent dyes.

  Read more →
• 

  Neural network Gaussian process

  A Neural Network Gaussian Process (NNGP) is a Gaussian process (GP) obtained as the limit of a certain type of sequence of neural networks. Specifically, a wide variety of network architectures converges to a GP in the infinitely wide limit, in the sense of distribution. The concept constitutes an intensional definition, i.e., a NNGP is just a GP, but distinguished by how it is obtained. == Motivation == Bayesian networks are a modeling tool for assigning probabilities to events, and thereby characterizing the uncertainty in a model's predictions. Deep learning and artificial neural networks are approaches used in machine learning to build computational models which learn from training examples. Bayesian neural networks merge these fields. They are a type of neural network whose parameters and predictions are both probabilistic. While standard neural networks often assign high confidence even to incorrect predictions, Bayesian neural networks can more accurately evaluate how likely their predictions are to be correct. Computation in artificial neural networks is usually organized into sequential layers of artificial neurons. The number of neurons in a layer is called the layer width. When we consider a sequence of Bayesian neural networks with increasingly wide layers (see figure), they converge in distribution to a NNGP. This large width limit is of practical interest, since the networks often improve as layers get wider. And the process may give a closed form way to evaluate networks. NNGPs also appears in several other contexts: It describes the distribution over predictions made by wide non-Bayesian artificial neural networks after random initialization of their parameters, but before training; it appears as a term in neural tangent kernel prediction equations; it is used in deep information propagation to characterize whether hyperparameters and architectures will be trainable. It is related to other large width limits of neural networks. === Scope === The first correspondence result had been established in the 1995 PhD thesis of Radford M. Neal, then supervised by Geoffrey Hinton at University of Toronto. Neal cites David J. C. MacKay as inspiration, who worked in Bayesian learning. Today the correspondence is proven for: Single hidden layer Bayesian neural networks; deep fully connected networks as the number of units per layer is taken to infinity; convolutional neural networks as the number of channels is taken to infinity; transformer networks as the number of attention heads is taken to infinity; recurrent networks as the number of units is taken to infinity. In fact, this NNGP correspondence holds for almost any architecture: Generally, if an architecture can be expressed solely via matrix multiplication and coordinatewise nonlinearities (i.e., a tensor program), then it has an infinite-width GP. This in particular includes all feedforward or recurrent neural networks composed of multilayer perceptron, recurrent neural networks (e.g., LSTMs, GRUs), (nD or graph) convolution, pooling, skip connection, attention, batch normalization, and/or layer normalization. === Illustration === Every setting of a neural network's parameters θ {\displaystyle \theta } corresponds to a specific function computed by the neural network. A prior distribution p ( θ ) {\displaystyle p(\theta )} over neural network parameters therefore corresponds to a prior distribution over functions computed by the network. As neural networks are made infinitely wide, this distribution over functions converges to a Gaussian process for many architectures. The notation used in this section is the same as the notation used below to derive the correspondence between NNGPs and fully connected networks, and more details can be found there. The figure to the right plots the one-dimensional outputs z L ( ⋅ ; θ ) {\displaystyle z^{L}(\cdot ;\theta )} of a neural network for two inputs x {\displaystyle x} and x ∗ {\displaystyle x^{}} against each other. The black dots show the function computed by the neural network on these inputs for random draws of the parameters from p ( θ ) {\displaystyle p(\theta )} . The red lines are iso-probability contours for the joint distribution over network outputs z L ( x ; θ ) {\displaystyle z^{L}(x;\theta )} and z L ( x ∗ ; θ ) {\displaystyle z^{L}(x^{};\theta )} induced by p ( θ ) {\displaystyle p(\theta )} . This is the distribution in function space corresponding to the distribution p ( θ ) {\displaystyle p(\theta )} in parameter space, and the black dots are samples from this distribution. For infinitely wide neural networks, since the distribution over functions computed by the neural network is a Gaussian process, the joint distribution over network outputs is a multivariate Gaussian for any finite set of network inputs. == Discussion == === Infinitely wide fully connected network === This section expands on the correspondence between infinitely wide neural networks and Gaussian processes for the specific case of a fully connected architecture. It provides a proof sketch outlining why the correspondence holds, and introduces the specific functional form of the NNGP for fully connected networks. The proof sketch closely follows the approach by Novak and coauthors. ==== Network architecture specification ==== Consider a fully connected artificial neural network with inputs x {\displaystyle x} , parameters θ {\displaystyle \theta } consisting of weights W l {\displaystyle W^{l}} and biases b l {\displaystyle b^{l}} for each layer l {\displaystyle l} in the network, pre-activations (pre-nonlinearity) z l {\displaystyle z^{l}} , activations (post-nonlinearity) y l {\displaystyle y^{l}} , pointwise nonlinearity ϕ ( ⋅ ) {\displaystyle \phi (\cdot )} , and layer widths n l {\displaystyle n^{l}} . For simplicity, the width n L + 1 {\displaystyle n^{L+1}} of the readout vector z L {\displaystyle z^{L}} is taken to be 1. The parameters of this network have a prior distribution p ( θ ) {\displaystyle p(\theta )} , which consists of an isotropic Gaussian for each weight and bias, with the variance of the weights scaled inversely with layer width. This network is illustrated in the figure to the right, and described by the following set of equations: x ≡ input y l ( x ) = { x l = 0 ϕ ( z l − 1 ( x ) ) l > 0 z i l ( x ) = ∑ j W i j l y j l ( x ) + b i l W i j l ∼ N ( 0 , σ w 2 n l ) b i l ∼ N ( 0 , σ b 2 ) ϕ ( ⋅ ) ≡ nonlinearity y l ( x ) , z l − 1 ( x ) ∈ R n l × 1 n L + 1 = 1 θ = { W 0 , b 0 , … , W L , b L } {\displaystyle {\begin{aligned}x&\equiv {\text{input}}\\y^{l}(x)&=\left\{{\begin{array}{lcl}x&&l=0\\\phi \left(z^{l-1}(x)\right)&&l>0\end{array}}\right.\\z_{i}^{l}(x)&=\sum _{j}W_{ij}^{l}y_{j}^{l}(x)+b_{i}^{l}\\W_{ij}^{l}&\sim {\mathcal {N}}\left(0,{\frac {\sigma _{w}^{2}}{n^{l}}}\right)\\b_{i}^{l}&\sim {\mathcal {N}}\left(0,\sigma _{b}^{2}\right)\\\phi (\cdot )&\equiv {\text{nonlinearity}}\\y^{l}(x),z^{l-1}(x)&\in \mathbb {R} ^{n^{l}\times 1}\\n^{L+1}&=1\\\theta &=\left\{W^{0},b^{0},\dots ,W^{L},b^{L}\right\}\end{aligned}}} ==== ==== z l | y l {\displaystyle z^{l}|y^{l}} is a Gaussian process We first observe that the pre-activations z l {\displaystyle z^{l}} are described by a Gaussian process conditioned on the preceding activations y l {\displaystyle y^{l}} . This result holds even at finite width. Each pre-activation z i l {\displaystyle z_{i}^{l}} is a weighted sum of Gaussian random variables, corresponding to the weights W i j l {\displaystyle W_{ij}^{l}} and biases b i l {\displaystyle b_{i}^{l}} , where the coefficients for each of those Gaussian variables are the preceding activations y j l {\displaystyle y_{j}^{l}} . Because they are a weighted sum of zero-mean Gaussians, the z i l {\displaystyle z_{i}^{l}} are themselves zero-mean Gaussians (conditioned on the coefficients y j l {\displaystyle y_{j}^{l}} ). Since the z l {\displaystyle z^{l}} are jointly Gaussian for any set of y l {\displaystyle y^{l}} , they are described by a Gaussian process conditioned on the preceding activations y l {\displaystyle y^{l}} . The covariance or kernel of this Gaussian process depends on the weight and bias variances σ w 2 {\displaystyle \sigma _{w}^{2}} and σ b 2 {\displaystyle \sigma _{b}^{2}} , as well as the second moment matrix K l {\displaystyle K^{l}} of the preceding activations y l {\displaystyle y^{l}} , z i l ∣ y l ∼ G P ( 0 , σ w 2 K l + σ b 2 ) K l ( x , x ′ ) = 1 n l ∑ i y i l ( x ) y i l ( x ′ ) {\displaystyle {\begin{aligned}z_{i}^{l}\mid y^{l}&\sim {\mathcal {GP}}\left(0,\sigma _{w}^{2}K^{l}+\sigma _{b}^{2}\right)\\K^{l}(x,x')&={\frac {1}{n^{l}}}\sum _{i}y_{i}^{l}(x)y_{i}^{l}(x')\end{aligned}}} The effect of the weight scale σ w 2 {\displaystyle \sigma _{w}^{2}} is to rescale the contribution to the covariance matrix from K l {\displaystyle K^{l}} , while the bias is shared for all inputs, and so σ b 2 {\displaystyle \sigma _{b}^{2}} makes the z i l {\displaystyle z_{i}^{l}} for different datapoints more similar and

  Read more →
• 

  Lexalytics

  Lexalytics, Inc. provides sentiment and intent analysis to an array of companies using SaaS and cloud based technology. Salience 6, the engine behind Lexalytics, was built as an on-premises, multi-lingual text analysis engine. It is leased to other companies who use it to power filtering and reputation management programs. In July, 2015 Lexalytics acquired Semantria to be used as a cloud option for its technology. In September, 2021 Lexalytics was acquired by CX company InMoment. == History == Lexalytics spun into existence in January 2003 out of a content management startup called Lightspeed. Lightspeed consolidated on America's West Coast. Jeff Catlin, a Lightspeed General Manager, and Mike Marshall, a Lighstpeed Principal Engineer, convinced investors to give them the East Coast company so as to avoid shutdown costs. Catlin and Marshall renamed the operation Lexalytics. Catlin took on the role of chief executive officer with Marshall working as Chief Technology Officer. Lexalytics opted to not accept venture cash. Instead, the company initially shared sales and marketing expenses with U.K. based document management company Infonic. The partner companies soon formed a joint venture in July 2008, which was later dissolved. Since then, Lexalytics has worked with many other companies, like Bottlenose, Salesforce, Thomson Reuters, Oracle and DataSift. Relationships with social media monitoring companies like Datasift tend to find Lexalytics’ Salience engine baked into the product itself. Lexalytics is used similarly to monitor sentiment as it relates to stock trading. In December 2014, Lexalytics announced the latest iteration to its sentiment analysis engine, Salience 6. Earlier that year Lexalytics acquired Semantria in a bid to appeal to a wider variety of business models. Created by former Lexalytics Marketing Director Oleg Rogynskyy, Semantria is a SaaS text mining service offered as an API and Excel based plugin that measures sentiment. The goal of the acquisition, which cost Lexalytics less than US$10 million, was to expand the customer base both within the United States and abroad with multilingual support. The engine that powers Semantria, Salience, is grounded in its deep learning ability. An example of this is its concept matrix, which allows Salience an understanding of concepts and relationship between concepts based on a detailed reading of the entire repository of Wikipedia. This matrix allows Salience to use Wikipedia for automatic categorization. Along with features like the concept matrix, Salience supports 16 international languages. The engine has earned Lexalytics a spot on EContent's “Top 100 Companies in the Digital Content Industry” List for 2014–2015. In September 2018, Lexalytics launched document data extraction market using natural language processing (NLP).

  Read more →
• 

  VideoPoet

  VideoPoet is a large language model developed by Google Research in 2023 for video making. It can be asked to animate still images. The model accepts text, images, and videos as inputs, with a program to add feature for any input to any format generated content. VideoPoet was publicly announced on December 19, 2023. It uses an autoregressive language model.

  Read more →
• 

  Behavior informatics

  Behavior informatics (BI) is the informatics of behaviors so as to obtain behavior intelligence and behavior insights. BI is a research method combining science and technology, specifically in the area of engineering. The purpose of BI includes analysis of current behaviors as well as the inference of future possible behaviors. This occurs through pattern recognition. Different from applied behavior analysis from the psychological perspective, BI builds computational theories, systems and tools to qualitatively and quantitatively model, represent, analyze, and manage behaviors of individuals, groups and/or organizations. BI is built on classic study of behavioral science, including behavior modeling, applied behavior analysis, behavior analysis, behavioral economics, and organizational behavior. Typical BI tasks consist of individual and group behavior formation, representation, computational modeling, analysis, learning, simulation, and understanding of behavior impact, utility, non-occurring behaviors, etc. for behavior intervention and management. The Behavior Informatics approach to data utilizes cognitive as well as behavioral data. By combining the data, BI has the potential to effectively illustrate the big picture when it comes to behavioral decisions and patterns. One of the goals of BI is also to be able to study human behavior while eliminating issues like self-report bias. This creates more reliable and valid information for research studies. == Behavior == From an Informatics perspective, a behavior consists of three key elements: actors (behavioral subjects and objects), operations (actions, activities) and interactions (relationships), and their properties. A behavior can be represented as a behavior vector, all behaviors of an actor or an actor group can be represented as behavior sequences and multi-dimensional behavior matrix. The following table explains some of the elements of behavior. Behavior Informatics takes into account behavior when analyzing business patterns and intelligence. The inclusion of behavior in these analyses provides prominent information on social and driving factors of patterns. == Applications == Behavior Informatics is being used in a variety of settings, including but not limited to health care management, telecommunications, marketing, and security. Behavior Informatics provides a manner in which to analyze and organize the many aspects that go into a person's health care needs and decisions. When it comes to business models, behavior informatics may be utilized for a similar role. Organizations implement behavior informatics to enhance business structure and regime, where it helps moderate ideal business decisions and situations.

  Read more →
• 

  Auralization

  Auralization is a procedure designed to model and simulate the experience of acoustic phenomena rendered as a soundfield in a virtualized space. This is useful in configuring the soundscape of architectural structures, concert venues, and public spaces, as well as in making coherent sound environments within virtual immersion systems. == History == The English term auralization was used for the first time by Kleiner et al. in an article in the journal of the AES en 1991. The increase of computational power allowed the development of the first acoustic simulation software towards the end of the 1960s. == Principles == Auralizations are experienced through systems rendering virtual acoustic models made by convolving or mixing acoustic events recorded 'dry' (or in an anechoic chamber) projected within a virtual model of an acoustic space, the characteristics of which are determined by means of sampling its impulse response (IR). Once this h ( t ) {\displaystyle h(t)} has been determined, the simulation of the resulting soundfield s ( t ) {\displaystyle s(t)} in the target environment is obtained by convolution: r ( t ) = h ( t ) ∗ s ( t ) {\displaystyle r(t)=h(t)s(t)} The resulting sound r ( t ) {\displaystyle r(t)} is heard as it would if emitted in that acoustic space. == Binaurality == For auralizations to be perceived as realistic, it is critical to emulate the human hearing in terms of position and orientation of the listener's head with respect to the sources of sound. For IR data to be convolved convincingly, the acoustic events are captured using a dummy head where two microphones are positioned on each side of the head to record an emulation of sound arriving at the locations of human ears, or using an ambisonics microphone array and mixed down for binaurality. Head-related transfer functions (HRTF) datasets can be used to simplify the process insofar as a monaural IR can be measured or simulated, then audio content is convolved with its target acoustic space. In rendering the experience, the transfer function corresponding to the orientation of the head is applied to simulate the corresponding spatial emanation of sound.

  Read more →
• 

  Common data model

  A common data model (CDM) can refer to any standardised data model which allows for data and information exchange between different applications and data sources. Common data models aim to standardise logical infrastructure so that related applications can "operate on and share the same data", and can be seen as a way to "organize data from many sources that are in different formats into a standard structure". A common data model has been described as one of the components of a "strong information system". A standardised common data model has also been described as a typical component of a well designed agile application besides a common communication protocol. Providing a single common data model within an organisation is one of the typical tasks of a data warehouse. == Examples of common data models == === Border crossings === X-trans.eu was a cross-border pilot project between the Free State of Bavaria (Germany) and Upper Austria with the aim of developing a faster procedure for the application and approval of cross-border large-capacity transports. The portal was based on a common data model that contained all the information required for approval. === Climate data === The Climate Data Store Common Data Model is a common data model set up by the Copernicus Climate Change Service for harmonising essential climate variables from different sources and data providers. === General information technology === Within service-oriented architecture, S-RAMP is a specification released by HP, IBM, Software AG, TIBCO, and Red Hat which defines a common data model for SOA repositories as well as an interaction protocol to facilitate the use of common tooling and sharing of data. Content Management Interoperability Services (CMIS) is an open standard for inter-operation of different content management systems over the internet, and provides a common data model for typed files and folders used with version control. The NetCDF software libraries for array-oriented scientific data implements a common data model called the NetCDF Java common data model, which consists of three layers built on top of each other to add successively richer semantics. === Health === Within genomic and medical data, the Observational Medical Outcomes Partnership (OMOP) research program established under the U.S. National Institutes of Health has created a common data model for claims and electronic health records which can accommodate data from different sources around the world. PCORnet, which was developed by the Patient-Centered Outcomes Research Institute, is another common data model for health data including electronic health records and patient claims. The Sentinel Common Data Model was initially started as Mini-Sentinel in 2008. It is used by the Sentinel Initiative of the USA's Food and Drug Administration. The Generalized Data Model was first published in 2019. It was designed to be a stand-alone data model as well as to allow for further transformation into other data models (e.g., OMOP, PCORNet, Sentinel). It has a hierarchical structure to flexibly capture relationships among data elements. The JANUS clinical trial data repository also provides a common data model which is based on the SDTM standard to represent clinical data submitted to regulatory agencies, such as tabulation datasets, patient profiles, listings, etc. === Logistics === SX000i is a specification developed jointly by the Aerospace and Defence Industries Association of Europe (ASD) and the American Aerospace Industries Association (AIA) to provide information, guidance and instructions to ensure compatibility and the commonality. The associated SX002D specification contains a common data model. === Microsoft Common Data Model === The Microsoft Common Data Model is a collection of many standardised extensible data schemas with entities, attributes, semantic metadata, and relationships, which represent commonly used concepts and activities in various businesses areas. It is maintained by Microsoft and its partners, and is published on GitHub. Microsoft's Common Data Model is used amongst others in Microsoft Dataverse and with various Microsoft Power Platform and Microsoft Dynamics 365 services. === Rail transport === RailTopoModel is a common data model for the railway sector. === Other === There are many more examples of various common data models for different uses published by different sources.

  Read more →
• 

  Alice AI (AI model family)

  Alice AI is a neural network family developed by the Russian company Yandex LLC. Alice AI can create and revise texts, generate new ideas and capture the context of the conversation with the user. Alice AI is trained using a dataset which includes information from books, magazines, newspapers and other open sources available on the internet. The neural network may get facts wrong and hallucinate, but as it learns, it will produce increasingly accurate answers. == Usage == YandexGPT is integrated into virtual assistant Alice (an analog of Siri and Alexa) and is available in Yandex services and applications. The company gives businesses access to the neural network’s API through the public cloud platform Yandex Cloud and develops its own B2B solutions on its basis. Since July 2023, 800 companies have participated in the closed testing of YandexGPT. IT developers, banks, retail businesses, and companies from other industries can use the technology in two modes — API and Playground (an interface in the Yandex Cloud console for testing models and hypotheses). Two model versions are available to businesses: one works in asynchronous mode and is better able to handle complex tasks, while the other is suitable for creating quick responses in real time. As a result, YandexGPT has been tested in dozens of scenarios such as content tasks, tech support, creating chatbots, virtual assistants, etc. == History == In February 2023, Yandex announced that it was working on its own version of the ChatGPT generative neural network while developing a language model from the YaLM (Yet another Language Model) family. The project was tentatively named YaLM 2.0, which was later changed to YandexGPT. On May 17, the company unveiled a neural network called YandexGPT (YaGPT) and enabled its virtual assistant Alice to interact with the new language model. On June 15, 2023, Yandex added the YandexGPT language model to the image generation application Shedevrum. This enabled its users to create fully-fledged posts complete with a title, text, and relevant illustration. In July 2023, YandexGPT launched new features enabling businesses to create virtual assistants and chatbots, as well as generate and structure texts. On September 7, 2023, Yandex presented a new version of the language model, YandexGPT 2, at the Practical ML Conf. Compared to the previous one, the new version is able to perform more types of tasks, and the quality of answers has improved. The developers claimed that YandexGPT 2 answered user questions better than the first version in 67% of cases. From October 6, 2023, YandexGPT can create short retellings of online Russian-language videos on the Internet. It can summarize videos that are from two minutes to four hours long and contain speech.

  Read more →
• 

  Super-resolution imaging

  Super-resolution imaging (SR) is a class of techniques that improve the resolution of an imaging system. In optical SR the diffraction limit of systems is transcended, while in geometrical SR the resolution of digital imaging sensors is enhanced. In some radar and sonar imaging applications (e.g. magnetic resonance imaging (MRI), high-resolution computed tomography), subspace decomposition-based methods (e.g. MUSIC) and compressed sensing-based algorithms (e.g., SAMV) are employed to achieve SR over standard periodogram algorithm. Super-resolution imaging techniques are used in general image processing and in super-resolution microscopy. == Super-resolution principles == Several concepts are fundamental to super-resolution imaging: Diffraction limit: the capacity of an optical instrument to reproduce the details of an object in an image has limits that are imposed by laws of physics: the diffraction equations in the wave theory of light, or the uncertainty principle for photons in quantum mechanics. Information transfer can never be increased beyond this boundary, but packets outside the limits can be cleverly swapped for (or multiplexed with) some inside it. Super-resolution microscopy does not so much “break” as “circumvent” the diffraction limit. New procedures probing electro-magnetic disturbances at the molecular level (in the so-called near field) remain fully consistent with Maxwell's equations. Spatial frequency domain: A succinct expression of the diffraction limit is given in the spatial frequency domain. In Fourier optics light distributions are expressed as superpositions of a series of grating light patterns in a range of fringe widths - these widths represent the spatial frequencies. It is generally taught that diffraction theory stipulates an upper limit, the cut-off spatial-frequency, beyond which pattern elements fail to be transferred into the optical image, i.e., are not resolved. But in fact what is set by diffraction theory is the width of the passband, not a fixed upper limit. No laws of physics are broken when a spatial frequency band beyond the cut-off spatial frequency is swapped for one inside it: this has long been implemented in dark-field microscopy. Nor are information-theoretical rules broken when superimposing several bands, disentangling them in the received image needs assumptions of object invariance during multiple exposures, i.e., the substitution of one kind of uncertainty for another. Information: When the term super-resolution is used in techniques based on the inference of object details using a statistical treatment of the image within standard resolution limits (for example, averaging multiple exposures), it involves an exchange of one kind of information (extracting signal from noise) for another (the assumption that the target has remained invariant). Recent breakthroughs incorporate quantum-transformer hybrids into super-resolution, such as QUIET‑SR, a 2025 model that employs shifted quantum window attention within a transformer to enhance image detail while respecting diffraction and information-theory limits Similarly, frequency-integrated transformers (e.g., FIT) enrich super-resolution by explicitly combining spatial and frequency-domain information via FFT-based attention, improving reconstruction across scales Resolution and localization: True resolution involves the distinction of whether a target, e.g. a star or a spectral line, is single or double, ordinarily requiring separable peaks in the image. When a target is known to be single, its location can be determined with higher precision than the image width by finding the centroid (center of gravity) of its image light distribution. The word ultra-resolution had been proposed for this process but it did not catch on, and the high-precision localization procedure is typically referred to as super-resolution. == Techniques == === Optical or diffractive super-resolution === Substituting spatial-frequency bands: Though the bandwidth allowable by diffraction is fixed, it can be positioned anywhere in the spatial-frequency spectrum. Dark-field illumination in microscopy is an example. See also aperture synthesis. ==== Multiplexing spatial-frequency bands ==== An image is formed using the normal passband of the optical device. Then, some known light structure (for example, a set of light fringes) is superimposed on the target. The image now contains components resulting from the combination of the target and the superimposed light structure, e.g. moiré fringes, and carries information about target detail which simple unstructured illumination does not. The “superresolved” components, however, need disentangling to be revealed. For an example, see structured illumination (figure to left). ==== Multiple parameter use within traditional diffraction limit ==== If a target has no special polarization or wavelength properties, two polarization states or non-overlapping wavelength regions can be used to encode target details, one in a spatial-frequency band inside the cut-off limit the other beyond it. Both would use normal passband transmission but are then separately decoded to reconstitute target structure with extended resolution. ==== Probing near-field electromagnetic disturbance ==== Super-resolution microscopy is generally discussed within the realm of conventional optical imagery. However, modern technology allows the probing of electromagnetic disturbance within molecular distances of the source, which has superior resolution properties. See also evanescent waves and the development of the new super lens. === Geometrical or image-processing super-resolution === ==== Multi-exposure image noise reduction ==== When an image is degraded by noise, the resolution may be improved by averaging multiple exposures. See example on the right. ==== Single-frame deblurring ==== Known defects in a given imaging situation, such as defocus or aberrations, can sometimes be mitigated in whole or in part by suitable spatial-frequency filtering of even a single image. Such procedures all stay within the diffraction-mandated passband, and do not extend it. ==== Sub-pixel image localization ==== The location of a single source can be determined by computing the "center of gravity" (centroid) of the light distribution extending over several adjacent pixels (see figure on the left). Provided that there is enough light, this can be achieved with arbitrary precision, very much better than pixel width of the detecting apparatus and the resolution limit for the decision of whether the source is single or double. This technique, which requires the presupposition that all the light comes from a single source, is at the basis of what has become known as super-resolution microscopy, e.g. stochastic optical reconstruction microscopy (STORM), where fluorescent probes attached to molecules give nanoscale distance information. It is also the mechanism underlying visual hyperacuity. ==== Bayesian induction beyond traditional diffraction limit ==== Some object features, though beyond the diffraction limit, may be known to be associated with other object features that are within the limits and hence contained in the image. Then conclusions can be drawn, using statistical methods, from the available image data about the presence of the full object. The classical example is Toraldo di Francia's proposition of judging whether an image is that of a single or double star by determining whether its width exceeds the spread from a single star. This can be achieved at separations well below the classical resolution bounds, and requires the prior limitation to the choice "single or double?" The approach can take the form of extrapolating the image in the frequency domain, by assuming that the object is an analytic function, and that we can exactly know the function values in some interval. This method is severely limited by the ever-present noise in digital imaging systems, but it can work for radar, astronomy, microscopy or magnetic resonance imaging. More recently, a fast single image super-resolution algorithm based on a closed-form solution to ℓ 2 − ℓ 2 {\displaystyle \ell _{2}-\ell _{2}} problems has been proposed and demonstrated to accelerate most of the existing Bayesian super-resolution methods significantly. == Aliasing == Geometrical SR reconstruction algorithms are possible if and only if the input low resolution images have been under-sampled and therefore contain aliasing. Because of this aliasing, the high-frequency content of the desired reconstruction image is embedded in the low-frequency content of each of the observed images. Given a sufficient number of observation images, and if the set of observations vary in their phase (i.e. if the images of the scene are shifted by a sub-pixel amount), then the phase information can be used to separate the aliased high-frequency content from the true low-frequency content, and the full-resolution image can be accurate

  Read more →
• 

  Contextual image classification

  Contextual image classification, a topic of pattern recognition in computer vision, is an approach of classification based on contextual information in images. "Contextual" means this approach is focusing on the relationship of the nearby pixels, which is also called neighbourhood. The goal of this approach is to classify the images by using the contextual information. == Introduction == Similar as processing language, a single word may have multiple meanings unless the context is provided, and the patterns within the sentences are the only informative segments we care about. For images, the principle is same. Find out the patterns and associate proper meanings to them. As the image illustrated below, if only a small portion of the image is shown, it is very difficult to tell what the image is about. Even try another portion of the image, it is still difficult to classify the image. However, if we increase the contextual of the image, then it makes more sense to recognize. As the full images shows below, almost everyone can classify it easily. During the procedure of segmentation, the methods which do not use the contextual information are sensitive to noise and variations, thus the result of segmentation will contain a great deal of misclassified regions, and often these regions are small (e.g., one pixel). Compared to other techniques, this approach is robust to noise and substantial variations for it takes the continuity of the segments into account. Several methods of this approach will be described below. == Applications == === Functioning as a post-processing filter to a labelled image === This approach is very effective against small regions caused by noise. And these small regions are usually formed by few pixels or one pixel. The most probable label is assigned to these regions. However, there is a drawback of this method. The small regions also can be formed by correct regions rather than noise, and in this case the method is actually making the classification worse. This approach is widely used in remote sensing applications. === Improving the post-processing classification === This is a two-stage classification process: For each pixel, label the pixel and form a new feature vector for it. Use the new feature vector and combine the contextual information to assign the final label to the === Merging the pixels in earlier stages === Instead of using single pixels, the neighbour pixels can be merged into homogeneous regions benefiting from contextual information. And provide these regions to classifier. === Acquiring pixel feature from neighbourhood === The original spectral data can be enriched by adding the contextual information carried by the neighbour pixels, or even replaced in some occasions. This kind of pre-processing methods are widely used in textured image recognition. The typical approaches include mean values, variances, texture description, etc. === Combining spectral and spatial information === The classifier uses the grey level and pixel neighbourhood (contextual information) to assign labels to pixels. In such case the information is a combination of spectral and spatial information. === Powered by the Bayes minimum error classifier === Contextual classification of image data is based on the Bayes minimum error classifier (also known as a naive Bayes classifier). Present the pixel: A pixel is denoted as x 0 {\displaystyle x_{0}} . The neighbourhood of each pixel x 0 {\displaystyle x_{0}} is a vector and denoted as N ( x 0 ) {\displaystyle N(x_{0})} . The values in the neighbourhood vector is denoted as f ( x i ) {\displaystyle f(x_{i})} . Each pixel is presented by the vector ξ = ( f ( x 0 ) , f ( x 1 ) , … , f ( x k ) ) {\displaystyle \xi =\left(f(x_{0}),f(x_{1}),\ldots ,f(x_{k})\right)} x i ∈ N ( x 0 ) ; i = 1 , … , k {\displaystyle x_{i}\in N(x_{0});\quad i=1,\ldots ,k} The labels (classification) of pixels in the neighbourhood N ( x 0 ) {\displaystyle N(x_{0})} are presented as a vector η = ( θ 0 , θ 1 , … , θ k ) {\displaystyle \eta =\left(\theta _{0},\theta _{1},\ldots ,\theta _{k}\right)} θ i ∈ { ω 0 , ω 1 , … , ω k } {\displaystyle \theta _{i}\in \left\{\omega _{0},\omega _{1},\ldots ,\omega _{k}\right\}} ω s {\displaystyle \omega _{s}} here denotes the assigned class. A vector presents the labels in the neighbourhood N ( x 0 ) {\displaystyle N(x_{0})} without the pixel x 0 {\displaystyle x_{0}} η ^ = ( θ 1 , θ 2 , … , θ k ) {\displaystyle {\hat {\eta }}=\left(\theta _{1},\theta _{2},\ldots ,\theta _{k}\right)} The neighbourhood: Size of the neighbourhood. There is no limitation of the size, but it is considered to be relatively small for each pixel x 0 {\displaystyle x_{0}} . A reasonable size of neighbourhood would be 3 × 3 {\displaystyle 3\times 3} of 4-connectivity or 8-connectivity ( x 0 {\displaystyle x_{0}} is marked as red and placed in the centre). The calculation: Apply the minimum error classification on a pixel x 0 {\displaystyle x_{0}} , if the probability of a class ω r {\displaystyle \omega _{r}} being presenting the pixel x 0 {\displaystyle x_{0}} is the highest among all, then assign ω r {\displaystyle \omega _{r}} as its class. θ 0 = ω r if P ( ω r ∣ f ( x 0 ) ) = max s = 1 , 2 , … , R P ( ω s ∣ f ( x 0 ) ) {\displaystyle \theta _{0}=\omega _{r}\quad {\text{ if }}\quad P(\omega _{r}\mid f(x_{0}))=\max _{s=1,2,\ldots ,R}P(\omega _{s}\mid f(x_{0}))} The contextual classification rule is described as below, it uses the feature vector x 1 {\displaystyle x_{1}} rather than x 0 {\displaystyle x_{0}} . θ 0 = ω r if P ( ω r ∣ ξ ) = max s = 1 , 2 , … , R P ( ω s ∣ ξ ) {\displaystyle \theta _{0}=\omega _{r}\quad {\text{ if }}\quad P(\omega _{r}\mid \xi )=\max _{s=1,2,\ldots ,R}P(\omega _{s}\mid \xi )} Use the Bayes formula to calculate the posteriori probability P ( ω s ∣ ξ ) {\displaystyle P(\omega _{s}\mid \xi )} P ( ω s ∣ ξ ) = p ( ξ ∣ ω s ) P ( ω s ) p ( ξ ) {\displaystyle P(\omega _{s}\mid \xi )={\frac {p(\xi \mid \omega _{s})P(\omega _{s})}{p\left(\xi \right)}}} The number of vectors is the same as the number of pixels in the image. For the classifier uses a vector corresponding to each pixel x i {\displaystyle x_{i}} , and the vector is generated from the pixel's neighbourhood. The basic steps of contextual image classification: Calculate the feature vector ξ {\displaystyle \xi } for each pixel. Calculate the parameters of probability distribution p ( ξ ∣ ω s ) {\displaystyle p(\xi \mid \omega _{s})} and P ( ω s ) {\displaystyle P(\omega _{s})} Calculate the posterior probabilities P ( ω r ∣ ξ ) {\displaystyle P(\omega _{r}\mid \xi )} and all labels θ 0 {\displaystyle \theta _{0}} . Get the image classification result. == Algorithms == === Template matching === The template matching is a "brute force" implementation of this approach. The concept is first create a set of templates, and then look for small parts in the image match with a template. This method is computationally high and inefficient. It keeps an entire templates list during the whole process and the number of combinations is extremely high. For a m × n {\displaystyle m\times n} pixel image, there could be a maximum of 2 m × n {\displaystyle 2^{m\times n}} combinations, which leads to high computation. This method is a top down method and often called table look-up or dictionary look-up. === Lower-order Markov chain === The Markov chain also can be applied in pattern recognition. The pixels in an image can be recognised as a set of random variables, then use the lower order Markov chain to find the relationship among the pixels. The image is treated as a virtual line, and the method uses conditional probability. === Hilbert space-filling curves === The Hilbert curve runs in a unique pattern through the whole image, it traverses every pixel without visiting any of them twice and keeps a continuous curve. It is fast and efficient. === Markov meshes === The lower-order Markov chain and Hilbert space-filling curves mentioned above are treating the image as a line structure. The Markov meshes however will take the two dimensional information into account. === Dependency tree === The dependency tree is a method using tree dependency to approximate probability distributions.

  Read more →
• 

  Underwater computer vision

  Underwater computer vision is a subfield of computer vision. In recent years, with the development of underwater vehicles ( ROV, AUV, gliders), the need to be able to record and process huge amounts of information has become increasingly important. Applications range from inspection of underwater structures for the offshore industry to the identification and counting of fishes for biological research. However, no matter how big the impact of this technology can be to industry and research, it still is in a very early stage of development compared to traditional computer vision. One reason for this is that, the moment the camera goes into the water, a whole new set of challenges appear. On one hand, cameras have to be made waterproof, marine corrosion deteriorates materials quickly and access and modifications to experimental setups are costly, both in time and resources. On the other hand, the physical properties of the water make light behave differently, changing the appearance of a same object with variations of depth, organic material, currents, temperature etc. == Applications == Seafloor survey Vehicle navigation and positioning Biological monitoring {possibly aquatic biomonitoring) Video mosaics as visual navigation maps Submarine pipeline inspection Wreckage visualization Maintenance of underwater structures Drowning detection systems == Medium differences == === Illumination === In air, light comes from the whole hemisphere on cloudy days, and is dominated by the sun. In water direct lighting comes from a cone about 96° wide above the scene. This phenomenon is called Snell's window. Artificial lighting can be used where natural light levels are insufficient and where the light path is too long to produce acceptable colour, as the loss of colour is a function of the total distance through water from the source to the camera lens port. === Light attenuation === Unlike air, water attenuates light exponentially. This results in hazy images with very low contrast. The main reasons for light attenuation are light absorption (where energy is removed from the light) and light scattering, by which the direction of light is changed. Light scattering can further be divided into forward scattering, which results in an increased blurriness and backward scattering that limits the contrast and is responsible for the characteristic veil of underwater images. Both scattering and attenuation are heavily influenced by the amount of organic matter dissolved or suspended in the water. Light attenuation in water is also a function of the wavelength. This means that different colours are attenuated at different rates, leading to colour degradation.with depth and distance. Red and orange light are attenuated faster, followed by yellows and greens. Blue is the least attenuated visible wavelength. === Artificial lighting === == Challenges == In high level computer vision, human structures are frequently used as image features for image matching in different applications. However, the sea bottom lacks such features, making it hard to find correspondences in two images. In order to be able to use a camera in the water, a watertight housing is required. However, refraction will happen at the water-glass and glass-air interface due to differences in density of the materials. This has the effect of introducing a non-linear image deformation. The motion of the vehicle presents another special challenge. Underwater vehicles are constantly moving due to currents and other phenomena. This introduces another uncertainty to algorithms, where small motions may appear in all directions. This can be specially important for video tracking. In order to reduce this problem image stabilization algorithms may be applied. == Relevant technology == === Image restoration === Image restoration< techniques are intended to model the degradation process and then invert it, obtaining the new image after solving. It is generally a complex approach that requires plenty of parameters that vary a lot between different water conditions. === Image enhancement === Image enhancement only tries to provide a visually more appealing image without taking the physical image formation process into account. These methods are usually simpler and less computational intensive. === Color correction === Various algorithms exist that perform automatic color correction. The UCM (Unsupervised Color Correction Method), for example, does this in the following steps: It firstly reduces the color cast by equalizing the color values. Then it enhances contrast by stretching the red histogram towards the maximum and finally saturation and intensity components are optimized. == Underwater stereo vision == It is usually assumed that stereo cameras have been calibrated previously, geometrically and radiometrically. This leads to the assumption that corresponding pixels should have the same color. However this can not be guaranteed in an underwater scene, because of dispersion and backscatter. However, it is possible to digitally model this phenomenon and create a virtual image with those effects removed == Other application fields == Imaging sonars have become more and more accessible and gained resolution, delivering better images. Sidescan sonars are used to produce complete maps of regions of the sea floor stitching together sequences of sonar images. However, sonar images often lack proper contrast and are degraded by artefacts and distortions due to noise, attitude changes of the AUV/ROV carrying the sonar or non uniform beam patterns. Another common problem with sonar computer vision is the comparatively low frame rate of sonar images.

  Read more →
• 

  Egocentric vision

  Egocentric vision or first-person vision is a sub-field of computer vision that entails analyzing images and videos captured by a wearable camera, which is typically worn on the head or on the chest and naturally approximates the visual field of the camera wearer. Consequently, visual data capture the part of the scene on which the user focuses to carry out the task at hand and offer a valuable perspective to understand the user's activities and their context in a naturalistic setting. The wearable camera looking forwards is often supplemented with a camera looking inward at the user's eye and able to measure a user's eye gaze, which is useful to reveal attention and to better understand the user's activity and intentions. == History == The idea of using a wearable camera to gather visual data from a first-person perspective dates back to the 70s, when Steve Mann invented "Digital Eye Glass", a device that, when worn, causes the human eye itself to effectively become both an electronic camera and a television display. Subsequently, wearable cameras were used for health-related applications in the context of Humanistic Intelligence and Wearable AI. Egocentric vision is best done from the point-of-eye, but may also be done by way of a neck-worn camera when eyeglasses would be in-the-way. This neck-worn variant was popularized by way of the Microsoft SenseCam in 2006 for experimental health research works. The interest of the computer vision community into the egocentric paradigm has been arising slowly entering the 2010s and it is rapidly growing in recent years, boosted by both the impressive advances in the field of wearable technology and by the increasing number of potential applications. The prototypical first-person vision system described by Kanade and Hebert, in 2012 is composed by three basic components: a localization component able to estimate the surrounding, a recognition component able to identify object and people, and an activity recognition component, able to provide information about the current activity of the user. Together, these three components provide a complete situational awareness of the user, which in turn can be used to provide assistance to the user or to the caregiver. Following this idea, the first computational techniques for egocentric analysis focused on hand-related activity recognition and social interaction analysis. Also, given the unconstrained nature of the video and the huge amount of data generated, temporal segmentation and summarization were among the first problems addressed. After almost ten years of egocentric vision (2007–2017), the field is still undergoing diversification. Emerging research topics include: Social saliency estimation Multi-agent egocentric vision systems Privacy preserving techniques and applications Attention-based activity analysis Social interaction analysis Hand pose analysis Ego graphical User Interfaces (EUI) Understanding social dynamics and attention Revisiting robotic vision and machine vision as egocentric sensing Activity forecasting Gaze prediction == Technical challenges == Today's wearable cameras are small and lightweight digital recording devices that can acquire images and videos automatically, without the user intervention, with different resolutions and frame rates, and from a first-person point of view. Therefore, wearable cameras are naturally primed to gather visual information from our everyday interactions since they offer an intimate perspective of the visual field of the camera wearer. Depending on the frame rate, it is common to distinguish between photo-cameras (also called lifelogging cameras) and video-cameras. The former (e.g., Narrative Clip and Microsoft SenseCam), are commonly worn on the chest, and are characterized by a very low frame rate (up to 2fpm) that allows to capture images over a long period of time without the need of recharging the battery. Consequently, they offer considerable potential for inferring knowledge about e.g. behaviour patterns, habits or lifestyle of the user. However, due to the low frame-rate and the free motion of the camera, temporally adjacent images typically present abrupt appearance changes so that motion features cannot be reliably estimated. The latter (e.g., Google Glass, GoPro), are commonly mounted on the head, and capture conventional video (around 35fps) that allows to capture fine temporal details of interactions. Consequently, they offer potential for in-depth analysis of daily or special activities. However, since the camera is moving with the wearer head, it becomes more difficult to estimate the global motion of the wearer and in the case of abrupt movements, the images can result blurred. In both cases, since the camera is worn in a naturalistic setting, visual data present a huge variability in terms of illumination conditions and object appearance. Moreover, the camera wearer is not visible in the image and what he/she is doing has to be inferred from the information in the visual field of the camera, implying that important information about the wearer, such for instance as pose or facial expression estimation, is not available. == Applications == A collection of studies published in a special theme issue of the American Journal of Preventive Medicine has demonstrated the potential of lifelogs captured through wearable cameras from a number of viewpoints. In particular, it has been shown that used as a tool for understanding and tracking lifestyle behaviour, lifelogs would enable the prevention of noncommunicable diseases associated to unhealthy trends and risky profiles (such as obesity and depression). In addition, used as a tool of re-memory cognitive training, lifelogs would enable the prevention of cognitive and functional decline in elderly people. More recently, egocentric cameras have been used to study human and animal cognition, human-human social interaction, human-robot interaction, human expertise in complex tasks. Other applications include navigation/assistive technologies for the blind, monitoring and assistance of industrial workflows, and augmented reality interfaces.

  Read more →
• 

  Calais (Reuters product)

  Calais is a service created by Thomson Reuters that automatically extracts semantic information from web pages in a format that can be used on the semantic web. Calais was launched in January 2008, and is free to use. The technology is now available via the website of Refinitiv, a provider of financial market data and infrastructure founded in 2018, that is a subsidiary of London Stock Exchange Group. The Calais Web service reads unstructured text and returns Resource Description Framework formatted results identifying entities, facts and events within the text. The service appears to be based on technology acquired when Reuters purchased ClearForest in 2007. The technology has also been used to automatically tag blog articles, and organize museum collections. Calais uses natural language processing technologies delivered via a web service interface.

  Read more →
• 

  Color histogram

  In image processing and photography, a color histogram is a representation of the distribution of colors in an image. For digital images, a color histogram represents the number of pixels that have colors in each of a fixed list of color ranges that span the image's color space (the set of all possible colors). A color histogram can be built for any kind of color space, although the term is more often used for three-dimensional spaces such as RGB or HSV. For monochromatic images, the term intensity histogram may be used instead. For multi-spectral images, where each pixel is represented by an arbitrary number of measurements (for example, beyond the three measurements in RGB), a color histogram is N-dimensional, with N being the number of measurements taken. Each measurement has its own wavelength range of the light spectrum, some of which may be outside the visible spectrum. If the set of possible color values is sufficiently small, each of those colors may be placed on a range by itself; then the histogram is merely the count of pixels that have each possible color. Most often, the space is divided into an appropriate number of ranges, often arranged as a regular grid, each containing many similar color values. A color histogram may also be represented and displayed as a smooth function defined over the color space that approximates the pixel counts. Like other kinds of histograms, a color histogram is a statistic that can be viewed as an approximation of an underlying continuous distribution of color values. == Overview == Color histograms are flexible constructs that can be built from images in various color spaces, whether RGB, rg chromaticity or any other color space of any dimension. A histogram of an image is produced first by discretization of the colors in the image into a number of bins, and counting the number of image pixels in each bin. For example, a red–blue chromaticity histogram can be formed by first normalizing color pixel values by dividing RGB values by R+G+B, then quantizing the normalized R and B coordinates into N bins each. A two-dimensional histogram of red–blue chromaticity divided into four bins (N=4) may yield a histogram similar to this table: A histogram can be N-dimensional. Although harder to display, a three-dimensional color histogram for the above example could be thought of as four separate red–blue histograms, where each of the four histograms contains the red–blue values for a bin of green (0–63, 64–127, 128–191, and 192–255). The histogram provides a compact summarization of the distribution of data in an image. A color histogram of an image is relatively invariant with translation and rotation about the viewing axis, and varies only slowly with the angle of view. By comparing histogram signatures of two images and matching the color content of one image with the other, a color histogram is particularly well suited for the problem of recognizing an object of unknown position and rotation within a scene. Importantly, translation of an RGB image into the illumination invariant rg-chromaticity space allows the histogram to operate well in varying light levels. 1. What is a histogram? A histogram is a graphical representation of the number of pixels in an image. In a more simple way to explain, a histogram is a bar graph, whose X-axis represents the tonal scale (black at the left and white at the right), and Y-axis represents the number of pixels in an image in a certain area of the tonal scale. For example, the graph of a luminance histogram shows the number of pixels for each brightness level (from black to white), and when there are more pixels, the peak at the certain luminance level is higher. 2. What is a color histogram? A color histogram of an image represents the distribution of the composition of colors in the image. It shows different types of colors appeared and the number of pixels in each type of the colors appeared. The relation between a color histogram and a luminance histogram is that a color histogram can be also expressed as “three luminance histograms”, each of which shows the brightness distribution of each individual red/green/blue color channel. == Characteristics of a color histogram == A color histogram focuses only on the proportion of the number of different types of colors, regardless of the spatial location of the colors. The values of a color histogram are from statistics. They show the statistical distribution of colors and the essential tone of an image. In general, as the color distributions of the foreground and background in an image are different, there might be a bimodal distribution in the histogram. For the luminance histogram alone, there is no perfect histogram and in general, the histogram can tell whether it is over-exposure or not, but there are times when you might think the image is over exposed by viewing the histogram; however, in reality it is not. == Principles of the formation of a color histogram == The formation of a color histogram is rather simple. From the definition above, we can simply count the number of pixels for each 256 scales in each of the 3 RGB channel, and plot them on 3 individual bar graphs. In general, a color histogram is based on a certain color space, such as RGB or HSV. When we compute the pixels of different colors in an image, if the color space is large, then we can first divide the color space into certain numbers of small intervals. Each of the intervals is called a bin. This process is called color quantization. Then, by counting the number of pixels in each of the bins, we get a color histogram of the image. The concrete steps of the principles can be viewed in Example 1. == Examples == === Example 1 === Given the following image of a cat (an original version and a version that has been reduced to 256 colors for easy histogram purposes), the following data represents a color histogram in the RGB color space, using four bins. Bin 0 corresponds to intensities 0–63 Bin 1 is 64–127 Bin 2 is 128–191 and Bin 3 is 192–255. === Example 2 === Application in camera: Nowadays, some cameras have the ability to show the 3 color histograms when we take photos. We can examine clips (spikes on either the black or white side of the scale) in each of the 3 RGB color histograms. If we find one or more clipping on a channel of the 3 RGB channels, then this would result in a loss of detail for that color. To illustrate this, consider this example: We know that each of the three R, G, B channels has a range of values from 0 to 255 (8 bit). So consider a photo that has a luminance range of 0–255. Assume the photo we take is made of 4 blocks that are adjacent to each other and we set the luminance scale for each of the 4 blocks of original photo to be 10, 100, 205, 245. Thus, the image looks like the topmost figure on the right. Then, we overexpose the photo a little, say, the luminance scale of each block is increased by 10. Thus, the luminance scale for each of the 4 blocks of new photo is 20, 110, 215, 255. Then, the image looks like the second figure on the right. There is not much difference between both figures, all we can see is that the whole image becomes brighter (the contrast for each of the blocks remain the same). Now, we overexpose the original photo again, this time the luminance scale of each block is increased by 50. Thus, the luminance scale for each of the 4 blocks of the new photo is 60, 150, 255, 255. The new image now looks like the third figure on the right. Note that the scale for the last block is 255 instead of 295, for 255 is the top scale and thus the last block has clipped. When this happens, we lose the contrast of the last 2 blocks, and thus we cannot recover the image no matter how we adjust it. To conclude, when taking photos with a camera that displays histograms, always keep the brightest tone in the image below the largest scale 255 on the histogram in order to avoid losing details. == Drawbacks and other approaches == The main drawback of histograms for classification is that the representation is dependent on the color of the object being studied, ignoring its shape and texture. Color histograms can potentially be identical for two images with different object content which happens to share color information. Conversely, without spatial or shape information, similar objects of different color may be indistinguishable based solely on color histogram comparisons. There is no way to distinguish a red and white cup from a red and white plate. Put it another way: histogram-based algorithms have no concept of a generic 'cup', and a model of a red and white cup is no use when given an otherwise identical blue and white cup. Another problem is that color histograms have high sensitivity to noisy interference such as lighting intensity changes and quantization errors. High dimensionality (bins) color histograms are also another issue. Some color histogram feature spaces often occupy more than one hundred di

  Read more →
• 

  News analytics

  In trading strategy, news analysis refers to the measurement of the various qualitative and quantitative attributes of textual (unstructured data) news stories. Some of these attributes are: sentiment, relevance, and novelty. Expressing news stories as numbers and metadata permits the manipulation of everyday information in a mathematical and statistical way. This data is often used in financial markets as part of a trading strategy or by businesses to judge market sentiment and make better business decisions. News analytics are usually derived through automated text analysis and applied to digital texts using elements from natural language processing and machine learning such as latent semantic analysis, support vector machines, "bag of words" among other techniques. == Applications and strategies == The application of sophisticated linguistic analysis to news and social media has grown from an area of research to mature product solutions since 2007. News analytics and news sentiment calculations are now routinely used by both buy-side and sell-side in alpha generation, trading execution, risk management, and market surveillance and compliance. There is however a good deal of variation in the quality, effectiveness and completeness of currently available solutions. A large number of companies use news analysis to help them make better business decisions. Academic researchers have become interested in news analysis especially with regards to predicting stock price movements, volatility and traded volume. Provided a set of values such as sentiment and relevance as well as the frequency of news arrivals, it is possible to construct news sentiment scores for multiple asset classes such as equities, Forex, fixed income, and commodities. Sentiment scores can be constructed at various horizons to meet the different needs and objectives of high and low frequency trading strategies, whilst characteristics such as direction and volatility of asset returns as well as the traded volume may be addressed more directly via the construction of tailor-made sentiment scores. Scores are generally constructed as a range of values. For instance, values may range between 0 and 100, where values above and below 50 convey positive and negative sentiment, respectively. === Absolute return strategies === The objective of absolute return strategies is absolute (positive) returns regardless of the direction of the financial market. To meet this objective, such strategies typically involve opportunistic long and short positions in selected instruments with zero or limited market exposure. In statistical terms, absolute return strategies should have very low correlation with the market return. Typically, hedge funds tend to employ absolute return strategies. Below, a few examples show how news analysis can be applied in the absolute return strategy space with the purpose to identify alpha opportunities applying a market neutral strategy or based on volatility trading. Example 1 Scenario: The gap between the news sentiment scores for direction, S {\displaystyle S} , of Company X {\displaystyle X} and Market Y {\displaystyle Y} has moved beyond + 20 {\displaystyle +20} . That is, S X − S Y {\displaystyle S_{X}-S_{Y}} ≥ 20 {\displaystyle 20} . Action: Buy the stock on Company X {\displaystyle X} and short the future on Market Y {\displaystyle Y} . Exit Strategy: When the gap in the news sentiment scores for direction of Company X {\displaystyle X} and Market Y {\displaystyle Y} has disappeared, S X − S Y {\displaystyle S_{X}-S_{Y}} = 0 {\displaystyle 0} , sell the stock on Company X {\displaystyle X} and go long the future on Market Y {\displaystyle Y} to close the positions. Example 2 Scenario: The news sentiment score for volatility of Company X {\displaystyle X} goes above 70 {\displaystyle 70} out of 100 {\displaystyle 100} indicating an expected volatility above the option implied volatility. Action: Buy a short-dated straddle (the purchase of both a put and a call) on the stock of Company X {\displaystyle X} . Exit Strategy: Keep the straddle on Company X {\displaystyle X} until expiry or until a certain profit target has been reached. === Relative return strategies === The objective of relative return strategies is to either replicate (passive management) or outperform (active management) a theoretical passive reference portfolio or benchmark. To meet these objectives such strategies typically involve long positions in selected instruments. In statistical terms, relative return strategies often have high correlation with the market return. Typically, mutual funds tend to employ relative return strategies. Below, a few examples show how news analysis can be applied in the relative return strategy space with the purpose to outperform the market applying a stock picking strategy and by making tactical tilts to ones asset allocation model. Example 1 Scenario: The news sentiment score for direction of Company X {\displaystyle X} goes above 70 {\displaystyle 70} out of 100 {\displaystyle 100} . Action: Buy the stock on Company X {\displaystyle X} . Exit Strategy: When the news sentiment score for direction of Company X {\displaystyle X} falls below 60 {\displaystyle 60} , sell the stock on Company X {\displaystyle X} to close the position. Example 2 Scenario: The news sentiment score for direction of Sector Z {\displaystyle Z} goes above 70 {\displaystyle 70} out of 100 {\displaystyle 100} . Action: Include Sector Z {\displaystyle Z} as a tactical bet in the asset allocation model. Exit Strategy: When the news sentiment score for direction of Sector Z {\displaystyle Z} falls below 60 {\displaystyle 60} , remove the tactical bet for Sector Z {\displaystyle Z} from the asset allocation model. === Financial risk management === The objective of financial risk management is to create economic value in a firm or to maintain a certain risk profile of an investment portfolio by using financial instruments to manage risk exposures, particularly credit risk and market risk. Other types include Foreign exchange, Shape, Volatility, Sector, Liquidity, Inflation risks, etc. Below, a few examples show how news analysis can be applied in the financial risk management space with the purpose to either arrive at better risk estimates in terms of Value at Risk (VaR) or to manage the risk of a portfolio to meet ones portfolio mandate. Example 1 Scenario: The bank operates a VaR model to manage the overall market risk of its portfolio. Action: Estimate the portfolio covariance matrix taking into account the development of the news sentiment score for volume. Implement the relevant hedges to bring the VaR of the bank in line with the desired levels. Example 2 Scenario: A portfolio manager operates his portfolio towards a certain desired risk profile. Action: Estimate the portfolio covariance matrix taking into account the development of the news sentiment score for volume. Scale the portfolio exposure according to the targeted risk profile. === Computer algorithms using news analytics === Within 0.33 seconds, computer algorithms using news analytics can notify subscribers which company the news is about, if the news article sentiment is positive or negative, if the news is ranked as high or low relative importance … relative relevance. the stock price reaction and the increase in trade volume is concentrated in the first 5 seconds after an news article is released. === Algorithmic order execution === The objective of algorithmic order execution, which is part of the concept of algorithmic trading, is to reduce trading costs by optimizing on the timing of a given order. It is widely used by hedge funds, pension funds, mutual funds, and other institutional traders to divide up large trades into several smaller trades to manage market impact, opportunity cost, and risk more effectively. The example below shows how news analysis can be applied in the algorithmic order execution space with the purpose to arrive at more efficient algorithmic trading systems. Example 1 Scenario: A large order needs to be placed in the market for the stock on Company X {\displaystyle X} . Action: Scale the daily volume distribution for Company X {\displaystyle X} applied in the algorithmic trading system, thus taking into account the news sentiment score for volume. This is followed by the creation of the desired trading distribution forcing greater market participation during the periods of the day when volume is expected to be heaviest. == Effects == Being able to express news stories as numbers permits the manipulation of everyday information in a statistical way that allows computers not only to make decisions once made only by humans, but to do so more efficiently. Since market participants are always looking for an edge, the speed of computer connections and the delivery of news analysis, measured in milliseconds, have become essential.

  Read more →