AI Art Zeus

AI Art Zeus — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Concurrency control

In information technology and computer science, especially in the fields of computer programming, operating systems, multiprocessors, and databases, concurrency control ensures that correct results for concurrent operations are generated, while getting those results as quickly as possible. Computer systems, both software and hardware, consist of modules, or components. Each component is designed to operate correctly, i.e., to obey or to meet certain consistency rules. When components that operate concurrently interact by messaging or by sharing accessed data (in memory or storage), a certain component's consistency may be violated by another component. The general area of concurrency control provides rules, methods, design methodologies, and theories to maintain the consistency of components operating concurrently while interacting, and thus the consistency and correctness of the whole system. Introducing concurrency control into a system means applying operation constraints which typically result in some performance reduction. Operation consistency and correctness should be achieved with as good as possible efficiency, without reducing performance below reasonable levels. Concurrency control can require significant additional complexity and overhead in a concurrent algorithm compared to the simpler sequential algorithm. For example, a failure in concurrency control can result in data corruption from torn read or write operations. == Concurrency control in databases == Comments: This section is applicable to all transactional systems, i.e., to all systems that use database transactions (atomic transactions; e.g., transactional objects in Systems management and in networks of smartphones which typically implement private, dedicated database systems), not only general-purpose database management systems (DBMSs). DBMSs need to deal also with concurrency control issues not typical just to database transactions but rather to operating systems in general. These issues (e.g., see Concurrency control in operating systems below) are out of the scope of this section. Concurrency control in Database management systems (DBMS; e.g., Bernstein et al. 1987, Weikum and Vossen 2001), other transactional objects, and related distributed applications (e.g., Grid computing and Cloud computing) ensures that database transactions are performed concurrently without violating the data integrity of the respective databases. Thus concurrency control is an essential element for correctness in any system where two database transactions or more, executed with time overlap, can access the same data, e.g., virtually in any general-purpose database system. Consequently, a vast body of related research has been accumulated since database systems emerged in the early 1970s. A well established concurrency control theory for database systems is outlined in the references mentioned above: serializability theory, which allows to effectively design and analyze concurrency control methods and mechanisms. An alternative theory for concurrency control of atomic transactions over abstract data types is presented in (Lynch et al. 1993), and not utilized below. This theory is more refined, complex, with a wider scope, and has been less utilized in the Database literature than the classical theory above. Each theory has its pros and cons, emphasis and insight. To some extent they are complementary, and their merging may be useful. To ensure correctness, a DBMS usually guarantees that only serializable transaction schedules are generated, unless serializability is intentionally relaxed to increase performance, but only in cases where application correctness is not harmed. For maintaining correctness in cases of failed (aborted) transactions (which can always happen for many reasons) schedules also need to have the recoverability (from abort) property. A DBMS also guarantees that no effect of committed transactions is lost, and no effect of aborted (rolled back) transactions remains in the related database. Overall transaction characterization is usually summarized by the ACID rules below. As databases have become distributed, or needed to cooperate in distributed environments (e.g., Federated databases in the early 1990, and Cloud computing currently), the effective distribution of concurrency control mechanisms has received special attention. === Database transaction and the ACID rules === The concept of a database transaction (or atomic transaction) has evolved in order to enable both a well understood database system behavior in a faulty environment where crashes can happen any time, and recovery from a crash to a well understood database state. A database transaction is a unit of work, typically encapsulating a number of operations over a database (e.g., reading a database object, writing, acquiring lock, etc.), an abstraction supported in database and also other systems. Each transaction has well defined boundaries in terms of which program/code executions are included in that transaction (determined by the transaction's programmer via special transaction commands). Every database transaction obeys the following rules (by support in the database system; i.e., a database system is designed to guarantee them for the transactions it runs): Atomicity - Either the effects of all or none of its operations remain ("all or nothing" semantics) when a transaction is completed (committed or aborted respectively). In other words, to the outside world a committed transaction appears (by its effects on the database) to be indivisible (atomic), and an aborted transaction does not affect the database at all. Either all the operations are done or none of them are. Consistency - Every transaction must leave the database in a consistent (correct) state, i.e., maintain the predetermined integrity rules of the database (constraints upon and among the database's objects). A transaction must transform a database from one consistent state to another consistent state (however, it is the responsibility of the transaction's programmer to make sure that the transaction itself is correct, i.e., performs correctly what it intends to perform (from the application's point of view) while the predefined integrity rules are enforced by the DBMS). Thus since a database can be normally changed only by transactions, all the database's states are consistent. Isolation - Transactions cannot interfere with each other (as an end result of their executions). Moreover, usually (depending on concurrency control method) the effects of an incomplete transaction are not even visible to another transaction. Providing isolation is the main goal of concurrency control. Durability - Effects of successful (committed) transactions must persist through crashes (typically by recording the transaction's effects and its commit event in a non-volatile memory). The concept of atomic transaction has been extended during the years to what has become Business transactions which actually implement types of Workflow and are not atomic. However also such enhanced transactions typically utilize atomic transactions as components. === Why is concurrency control needed? === If transactions are executed serially, i.e., sequentially with no overlap in time, no transaction concurrency exists. However, if concurrent transactions with interleaving operations are allowed in an uncontrolled manner, some unexpected, undesirable results may occur, such as: The lost update problem: A second transaction writes a second value of a data-item (datum) on top of a first value written by a first concurrent transaction, and the first value is lost to other transactions running concurrently which need, by their precedence, to read the first value. The transactions that have read the wrong value end with incorrect results. The dirty read problem: Transactions read a value written by a transaction that has been later aborted. This value disappears from the database upon abort, and should not have been read by any transaction ("dirty read"). The reading transactions end with incorrect results. The incorrect summary problem: While one transaction takes a summary over the values of all the instances of a repeated data-item, a second transaction updates some instances of that data-item. The resulting summary does not reflect a correct result for any (usually needed for correctness) precedence order between the two transactions (if one is executed before the other), but rather some random result, depending on the timing of the updates, and whether certain update results have been included in the summary or not. Most high-performance transactional systems need to run transactions concurrently to meet their performance requirements. Thus, without concurrency control such systems can neither provide correct results nor maintain their databases consistently. === Concurrency control mechanisms === ==== Categories ==== The main categories of concurrency control mechanis
Read more →
Artificial intelligence in education

Artificial intelligence in education (often abbreviated as AIEd) is a subfield of educational technology that studies how to use artificial intelligence to create learning environments. Considerations in the field include data-driven decision-making, AI ethics, data privacy and AI literacy. Concerns include the potential for cheating, over-reliance, equity of access, reduced critical thinking, and the perpetuation of misinformation and bias. == History == Efforts to integrate AI into educational contexts have often followed technological advancement in the history of artificial intelligence. In the 1960s, educators and researchers began developing computer-based instruction systems, such as PLATO, developed by the University of Illinois. In the 1970s and 1980s, intelligent tutoring systems (ITS) were being adapted for classroom instruction. The International Artificial Intelligence in Education Society was founded in 1993. Coinciding with the AI boom of the 2020s, the use of large language models in the global north has been promoted and funded by venture capital and big tech. Companies creating AI services have targeted students and educational institutions as customers. Similarly, pre-AI boom educational companies have expanded their use of AI technologies. These commercial incentives for AIEd use may be related to a potential AI bubble. In the U.S., bipartisan support of AI development in K-12 education has been expressed, but specific implementations and best practices remain contentious. == Theory == AIEd applies theory from education studies, machine learning, and related fields. A 2019 review of the previous decade of studies found that most research prioritized technological design over pedagogical integration. Ouyang and Jiao (2021) propose three paradigms for AI in education, which follow roughly from least to most learner-centered and from requiring least to most technical complexity from the AI systems: AI-directed, learner-as-recipient: AIEd systems present a pre-set curriculum based on statistical patterns that do not adjust to learner's feedback. AI-supported, learner-as-collaborator: Systems that incorporate responsiveness to learner's feedback through, for example, natural language processing, wherein AI can support knowledge construction. AI-empowered, learner-as-leader: This model seeks to position AI as a supplement to human intelligence wherein learners take agency and AI provides consistent and actionable feedback. Some scholars place AI in education within a socio-technical framework. This positions AI alongside other emerging educational technologies, such as computing, the internet, and social media. The framework of Tsao, Heinrichs and Camit (2025) draws on new materialism and posthumanism, specifically Donna Haraway's concept of sympoiesis (making-with). This perspective views learning as an entanglement of human and non-human actors (students, teachers, and AI algorithms), where knowledge is co-composed in contact zones between human context and algorithmic prediction. AI agents have been trained on biased datasets, and thus continue to perpetuate societal biases. Since LLMs were created to produce human-like text, algorithmic bias can be introduced and reproduced. AI's data processing and monitoring reinforce neoliberal approaches to education rather than addressing inequalities. == Applications == Uses of generative AI chatbots in education have included assessment and feedback, machine translations, proof-reading exam question generation and copy editing, or as virtual assistants. Emotional AI in education is the study and development of systems that can detect learners' emotions or provide emotional support in learning. == Usage == === Schools and educators === Following the release of ChatGPT in November 2022, some schools and large school districts blocked access to the site and issued warnings that the use of such tools would be seen as cheating. Governmental and non-governmental organizations such as UNESCO, Article 4 of the European Union's AI Act, and the U.S. Department of Education have published reports advocating for specific AIEd approaches. National higher-education bodies have also published guidance on generative AI, including Ireland's Higher Education Authority, which issued a policy framework for higher education teaching and learning in December 2025. In 2024, UNESCO released updated global guidance for generative AI in education, emphasizing ethical use, teacher training, and data protection to ensure responsible integration of AI tools in learning environments. According to Taso (2025), policy implementation in higher education is interpreted and enacted differently by various organizations. These decentralized policies can lead to inconsistent enforcement and confusion among students regarding what constitutes acceptable use, with the burden of ethical navigation falling on individual teachers and students. AI integration in classrooms has created new forms of invisible labour for educators, who must navigate ambiguous policies, redesign assessments to be AI-resilient, and adjudicate potential academic integrity violations. The use of AI detection tools has also been criticised for creating an adversarial relationship between students and institutions, where students may be falsely accused of misconduct based on probabilistic software. AIEd advocates say that efforts should be made towards increasing global accessibility and training educators to serve underprivileged areas. === Students === Reliance on generative AI has been linked with reduced academic self-esteem and performance, and heightened learned helplessness. Algorithm errors and hallucinations are common flaws in AI agents, making them less trustworthy and reliable. According to a 2025 survey from Inside Higher Ed, 85% of higher education students use generative AI technology in some way, with 25% using AI to complete assignments for them. The most common reason cited for using AI to cheat was pressure to get high grades. 97% of students wanted some form of action from schools on the threat to academic integrity caused by AI, with the most popular options being clearer policies and more education about ethical uses of AI. In September 2025, The Atlantic published an op-ed from a high school senior arguing that the normalization of AI cheating was eroding critical thinking, academic integrity, creativity, and the shared student experience.
Read more →
Anomaly detection

In data analysis, anomaly detection (also referred to as outlier detection and sometimes as novelty detection) is generally understood to be the identification of rare items, events or observations which deviate significantly from the majority of the data and do not conform to a well defined notion of normal behavior. Such examples may arouse suspicions of being generated by a different mechanism, or appear inconsistent with the remainder of that set of data. Anomaly detection finds application in many domains including cybersecurity, medicine, machine vision, statistics, neuroscience, law enforcement and financial fraud to name only a few. Anomalies were initially searched for clear rejection or omission from the data to aid statistical analysis, for example to compute the mean or standard deviation. They were also removed to better predictions from models such as linear regression, and more recently their removal aids the performance of machine learning algorithms. However, in many applications anomalies themselves are of interest and are the observations most desirous in the entire data set, which need to be identified and separated from noise or irrelevant outliers. Three broad categories of anomaly detection techniques exist. Supervised anomaly detection techniques require a data set that has been labeled as "normal" and "abnormal" and involves training a classifier. However, this approach is rarely used in anomaly detection due to the general unavailability of labelled data and the inherent unbalanced nature of the classes. Semi-supervised anomaly detection techniques assume that some portion of the data is labelled. This may be any combination of the normal or anomalous data, but more often than not, the techniques construct a model representing normal behavior from a given normal training data set, and then test the likelihood of a test instance to be generated by the model. Unsupervised anomaly detection techniques assume the data is unlabelled and are by far the most commonly used due to their wider and relevant application. == Definition == Many attempts have been made in the statistical and computer science communities to define an anomaly. The most prevalent ones include the following, and can be categorised into three groups: those that are ambiguous, those that are specific to a method with pre-defined thresholds usually chosen empirically, and those that are formally defined: === Ill defined === An outlier is an observation which deviates so much from the other observations as to arouse suspicions that it was generated by a different mechanism. Anomalies are instances or collections of data that occur very rarely in the data set and whose features differ significantly from most of the data. An outlier is an observation (or subset of observations) which appears to be inconsistent with the remainder of that set of data. An anomaly is a point or collection of points that is relatively distant from other points in multi-dimensional space of features. Anomalies are patterns in data that do not conform to a well-defined notion of normal behaviour. === Specific === Let T be observations from a univariate Gaussian distribution and O a point from T. Then the z-score for O is greater than a pre-selected threshold if and only if O is an outlier. == History == === Intrusion detection === The concept of intrusion detection, a critical component of anomaly detection, has evolved significantly over time. Initially, it was a manual process where system administrators would monitor for unusual activities, such as a vacationing user's account being accessed or unexpected printer activity. This approach was not scalable and was soon superseded by the analysis of audit logs and system logs for signs of malicious behavior. By the late 1970s and early 1980s, the analysis of these logs was primarily used retrospectively to investigate incidents, as the volume of data made it impractical for real-time monitoring. The affordability of digital storage eventually led to audit logs being analyzed online, with specialized programs being developed to sift through the data. These programs, however, were typically run during off-peak hours due to their computational intensity. The 1990s brought the advent of real-time intrusion detection systems capable of analyzing audit data as it was generated, allowing for immediate detection of and response to attacks. This marked a significant shift towards proactive intrusion detection. As the field has continued to develop, the focus has shifted to creating solutions that can be efficiently implemented across large and complex network environments, adapting to the ever-growing variety of security threats and the dynamic nature of modern computing infrastructures. == Applications == Anomaly detection is applicable in a very large number and variety of domains, and is an important subarea of unsupervised machine learning. As such it has applications in cyber-security, intrusion detection, fraud detection, fault detection, system health monitoring, event detection in sensor networks, detecting ecosystem disturbances, defect detection in images using machine vision, medical diagnosis and law enforcement. === Intrusion detection === Anomaly detection was proposed for intrusion detection systems (IDS) by Dorothy Denning in 1986. Anomaly detection for IDS is normally accomplished with thresholds and statistics, but can also be done with soft computing, and inductive learning. Types of features proposed by 1999 included profiles of users, workstations, networks, remote hosts, groups of users, and programs based on frequencies, means, variances, covariances, and standard deviations. The counterpart of anomaly detection in intrusion detection is misuse detection. === Fintech fraud detection === Anomaly detection is vital in fintech for fraud prevention. === Preprocessing === Preprocessing data to remove anomalies can be an important step in data analysis, and is done for a number of reasons. Statistics such as the mean and standard deviation are more accurate after the removal of anomalies, and the visualisation of data can also be improved. In supervised learning, removing the anomalous data from the dataset often results in a statistically significant increase in accuracy. === Video surveillance === Anomaly detection has become increasingly vital in video surveillance to enhance security and safety. With the advent of deep learning technologies, methods using Convolutional Neural Networks (CNNs) and Simple Recurrent Units (SRUs) have shown significant promise in identifying unusual activities or behaviors in video data. These models can process and analyze extensive video feeds in real-time, recognizing patterns that deviate from the norm, which may indicate potential security threats or safety violations. An important aspect for video surveillance is the development of scalable real-time frameworks. Such pipelines are required for processing multiple video streams with low computational resources. === IT infrastructure === In IT infrastructure management, anomaly detection is crucial for ensuring the smooth operation and reliability of services. These are complex systems, composed of many interactive elements and large data quantities, requiring methods to process and reduce this data into a human and machine interpretable format. Techniques like the IT Infrastructure Library (ITIL) and monitoring frameworks are employed to track and manage system performance and user experience. Detected anomalies can help identify and pre-empt potential performance degradations or system failures, thus maintaining productivity and business process effectiveness. === IoT systems === Anomaly detection is critical for the security and efficiency of Internet of Things (IoT) systems. It helps in identifying system failures and security breaches in complex networks of IoT devices. The methods must manage real-time data, diverse device types, and scale effectively. Garg et al. have introduced a multi-stage anomaly detection framework that improves upon traditional methods by incorporating spatial clustering, density-based clustering, and locality-sensitive hashing. This tailored approach is designed to better handle the vast and varied nature of IoT data, thereby enhancing security and operational reliability in smart infrastructure and industrial IoT systems. === Petroleum industry === Anomaly detection is crucial in the petroleum industry for monitoring critical machinery. A 2015 paper proposed a novel segmentation algorithm using support vector machines to analyze sensor data for real-time anomaly detection. === Oil and gas pipeline monitoring === In the oil and gas sector, anomaly detection is not just crucial for maintenance and safety, but also for environmental protection. Aljameel et al. propose an advanced machine learning-based model for detecting minor leaks in oil and gas pipelines, a task traditional methods may miss.
Read more →
Automated Mathematician

The Automated Mathematician (AM) is one of the earliest successful discovery systems. It was created by Douglas Lenat in Lisp, and in 1977 led to Lenat being awarded the IJCAI Computers and Thought Award. AM worked by generating and modifying short Lisp programs which were then interpreted as defining various mathematical concepts; for example, a program that tested equality between the length of two lists was considered to represent the concept of numerical equality, while a program that produced a list whose length was the product of the lengths of two other lists was interpreted as representing the concept of multiplication. The system had elaborate heuristics for choosing which programs to extend and modify, based on the experiences of working mathematicians in solving mathematical problems. == Controversy == Lenat claimed that the system was composed of hundreds of data structures called "concepts", together with hundreds of "heuristic rules" and a simple flow of control: "AM repeatedly selects the top task from the agenda and tries to carry it out. This is the whole control structure!" Yet the heuristic rules were not always represented as separate data structures; some had to be intertwined with the control flow logic. Some rules had preconditions that depended on the history, or otherwise could not be represented in the framework of the explicit rules. What's more, the published versions of the rules often involve vague terms that are not defined further, such as "If two expressions are structurally similar, ..." (Rule 218) or "... replace the value obtained by some other (very similar) value..." (Rule 129). Another source of information is the user, via Rule 2: "If the user has recently referred to X, then boost the priority of any tasks involving X." Thus, it appears quite possible that much of the real discovery work is buried in unexplained procedures. Lenat claimed that the system had rediscovered both Goldbach's conjecture and the fundamental theorem of arithmetic. Later critics accused Lenat of over-interpreting the output of AM. In his paper Why AM and Eurisko appear to work, Lenat conceded that any system that generated enough short Lisp programs would generate ones that could be interpreted by an external observer as representing equally sophisticated mathematical concepts. However, he argued that this property was in itself interesting—and that a promising direction for further research would be to look for other languages in which short random strings were likely to be useful. == Successor == This intuition was the basis of AM's successor Eurisko, which attempted to generalize the search for mathematical concepts to the search for useful heuristics.
Read more →
Thermal attack

A thermal attack (aka thermal imaging attack) is an approach that exploits heat traces to uncover the entered credentials. These attacks rely on the phenomenon of heat transfer from one object to another. During authentication, heat transfers from the users' hands to the surface they are interacting with, leaving heat traces behind that can be analyzed using thermal cameras that operate in the far-infrared spectrum. These traces can be recovered and used to reconstruct the passwords. In some cases, the attack can be successful even 30 seconds after the user has authenticated. Thermal attacks can be performed after the victim had authenticated, alleviating the need for in-situ observation attacks (e.g., shoulder surfing attacks) that can be affected by hand occlusions. While smudge attacks can reveal the order of entries of graphical passwords, such as the Android Lock Patterns, thermal attacks can reveal the order of entries even in the case of PINs or alphanumeric passwords. The reason thermal attacks leak information about the order of entry is because keys and buttons that the user touches first lose heat over time, while recently touched ones maintain the heat signature for a longer time. This results in distinguishable heat patterns that can tell the attacker which entry was entered first. Thermal attacks were shown to be effective against plastic keypads, such as the ones used to enter credit card's PINs in supermarkets and restaurants, and on handheld mobile devices such as smartphones and tablets. In their paper published at the Conference on Human Factors in Computing Systems (CHI 2017), Abdelrahman et al. showed that the attack is feasible on today's smartphones. They also proposed some ways to mitigate the attack, such as swiping randomly on the screen to distort the heat traces, or forcing maximum CPU usage for a few seconds. Thermal attacks can also infer passwords from heat traces on keyboards. Researchers at the University of Glasgow showed that attackers who use AI methods can be more effective in performing thermal attacks. Their study presents a new tool called ThermoSecure and evaluates it in two user studies. The results show that ThermoSecure can successfully attack passwords with an average accuracy of 92% to 55%, depending on the length of the password. The effectiveness of thermal attacks also depends on typing behavior and the material of the keycaps. ABS keycaps, which retain heat traces longer, are more vulnerable to thermal attacks. The study also discusses ways to protect against thermal attacks and presents seven potential mitigation approaches. Dr Khamis, who led the development of the technology with Norah Alotaibi and John Williamson, said with thermal imaging cameras more affordable than ever and machine learning becoming more accessible, it was "very likely that people around the world are developing systems along similar lines to ThermoSecure in order to steal passwords". == Thermal Attack Mitigation == === Simple and Practical Measures === One basic and effective way to mitigate thermal attacks is to deliberately create heat noise over the input interface, such as a keypad or keyboard, after entering a password. For instance, placing one's palm over the entire interface for a few seconds after use can obscure the thermal pattern left by the fingers, making it much more difficult for an unauthorized user to interpret the heat traces. === Range of Proposed Strategies === In addition to simple methods, researchers have developed a spectrum of mitigation strategies to counter thermal attacks. These strategies encompass 15 different approaches including: Use of Biometrics: Replacing traditional pin codes or passwords with biometric authentication, such as fingerprint recognition or facial recognition, eliminates the issue of residual heat on keypads. Heating the Interface: Implementing technology to slightly warm up the keypad can effectively neutralize the heat traces left by fingers, preventing thermal cameras from capturing the pattern. Randomizing Key Layouts: Employing dynamic key layouts that change positions every time the interface is used, making it impossible to correlate heat patterns with static input positions. === Technological Intervention on Thermal Cameras === Another avenue for mitigation is to address the issue at the source by modifying thermal cameras. Proposals have been made to develop thermal cameras that can automatically detect vulnerable interfaces such as keyboards or keypads. When these interfaces are detected within the camera's field of view, the camera would be programmed to prevent the user from recording images of them. This solution, however, would require widespread adoption by thermal camera manufacturers. Additionally, the approach is particularly viable for thermal cameras connected to a computing device, such as a smartphone, which can process the images in real time. Many affordable thermal cameras are standalone and do not have connectivity or processing capabilities. However, thermal cameras designed for connection to mobile devices can utilize the smartphone's processing power, making this mitigation approach feasible for such devices.
Read more →
Computer audition

Computer audition (CA) or machine listening is the general field of study of algorithms and systems for audio interpretation by machines. Since the notion of what it means for a machine to "hear" is very broad and somewhat vague, computer audition attempts to bring together several disciplines that originally dealt with specific problems or had a concrete application in mind. The engineer Paris Smaragdis, interviewed in Technology Review, talks about these systems — "software that uses sound to locate people moving through rooms, monitor machinery for impending breakdowns, or activate traffic cameras to record accidents." Inspired by models of human audition, CA deals with questions of representation, transduction, grouping, use of musical knowledge and general sound semantics for the purpose of performing intelligent operations on audio and music signals by the computer. Technically this requires a combination of methods from the fields of signal processing, auditory modelling, music perception and cognition, pattern recognition, and machine learning, as well as more traditional methods of artificial intelligence for musical knowledge representation. == Applications == Like computer vision versus image processing, computer audition versus audio engineering deals with understanding of audio rather than processing. It also differs from problems of speech understanding by machine since it deals with general audio signals, such as natural sounds and musical recordings. Applications of computer audition are widely varying, and include search for sounds, genre recognition, acoustic monitoring, music transcription, score following, audio texture, music improvisation, emotion in audio and so on. == Related disciplines == Computer Audition overlaps with the following disciplines: Music information retrieval: methods for search and analysis of similarity between music signals. Auditory scene analysis: understanding and description of audio sources and events. Computational musicology and mathematical music theory: use of algorithms that employ musical knowledge for analysis of music data. Computer music: use of computers in creative musical applications. Machine musicianship: audition driven interactive music systems. == Areas of study == Since audio signals are interpreted by the human ear–brain system, that complex perceptual mechanism should be simulated somehow in software for "machine listening". In other words, to perform on par with humans, the computer should hear and understand audio content much as humans do. Analyzing audio accurately involves several fields: electrical engineering (spectrum analysis, filtering, and audio transforms); artificial intelligence (machine learning and sound classification); psychoacoustics (sound perception); cognitive sciences (neuroscience and artificial intelligence); acoustics (physics of sound production); and music (harmony, rhythm, and timbre). Furthermore, audio transformations such as pitch shifting, time stretching, and sound object filtering, should be perceptually and musically meaningful. For best results, these transformations require perceptual understanding of spectral models, high-level feature extraction, and sound analysis/synthesis. Finally, structuring and coding the content of an audio file (sound and metadata) could benefit from efficient compression schemes, which discard inaudible information in the sound. Computational models of music and sound perception and cognition can lead to a more meaningful representation, a more intuitive digital manipulation and generation of sound and music in musical human-machine interfaces. The study of CA could be roughly divided into the following sub-problems: Representation: signal and symbolic. This aspect deals with time-frequency representations, both in terms of notes and spectral models, including pattern playback and audio texture. Feature extraction: sound descriptors, segmentation, onset, pitch and envelope detection, chroma, and auditory representations. Musical knowledge structures: analysis of tonality, rhythm, and harmonies. Sound similarity: methods for comparison between sounds, sound identification, novelty detection, segmentation, and clustering. Sequence modeling: matching and alignment between signals and note sequences. Source separation: methods of grouping of simultaneous sounds, such as multiple pitch detection and time-frequency clustering methods. Auditory cognition: modeling of emotions, anticipation and familiarity, auditory surprise, and analysis of musical structure. Multi-modal analysis: finding correspondences between textual, visual, and audio signals. === Representation issues === Computer audition deals with audio signals that can be represented in a variety of fashions, from direct encoding of digital audio in two or more channels to symbolically represented synthesis instructions. Audio signals are usually represented in terms of analogue or digital recordings. Digital recordings are samples of acoustic waveform or parameters of audio compression algorithms. One of the unique properties of musical signals is that they often combine different types of representations, such as graphical scores and sequences of performance actions that are encoded as MIDI files. Since audio signals usually comprise multiple sound sources, then unlike speech signals that can be efficiently described in terms of specific models (such as source-filter model), it is hard to devise a parametric representation for general audio. Parametric audio representations usually use filter banks or sinusoidal models to capture multiple sound parameters, sometimes increasing the representation size in order to capture internal structure in the signal. Additional types of data that are relevant for computer audition are textual descriptions of audio contents, such as annotations, reviews, and visual information in the case of audio-visual recordings. === Features === Description of contents of general audio signals usually requires extraction of features that capture specific aspects of the audio signal. Generally speaking, one could divide the features into signal or mathematical descriptors such as energy, description of spectral shape etc., statistical characterization such as change or novelty detection, special representations that are better adapted to the nature of musical signals or the auditory system, such as logarithmic growth of sensitivity (bandwidth) in frequency or octave invariance (chroma). Since parametric models in audio usually require very many parameters, the features are used to summarize properties of multiple parameters in a more compact or salient representation. === Musical knowledge === Finding specific musical structures is possible by using musical knowledge as well as supervised and unsupervised machine learning methods. Examples of this include detection of tonality according to distribution of frequencies that correspond to patterns of occurrence of notes in musical scales, distribution of note onset times for detection of beat structure, distribution of energies in different frequencies to detect musical chords and so on. === Sound similarity and sequence modeling === Comparison of sounds can be done by comparison of features with or without reference to time. In some cases an overall similarity can be assessed by close values of features between two sounds. In other cases when temporal structure is important, methods of dynamic time warping need to be applied to "correct" for different temporal scales of acoustic events. Finding repetitions and similar sub-sequences of sonic events is important for tasks such as texture synthesis and machine improvisation. === Source separation === Since one of the basic characteristics of general audio is that it comprises multiple simultaneously sounding sources, such as multiple musical instruments, people talking, machine noises or animal vocalization, the ability to identify and separate individual sources is very desirable. Unfortunately, there are no methods that can solve this problem in a robust fashion. Existing methods of source separation rely sometimes on correlation between different audio channels in multi-channel recordings. The ability to separate sources from stereo signals requires different techniques than those usually applied in communications where multiple sensors are available. Other source separation methods rely on training or clustering of features in mono recording, such as tracking harmonically related partials for multiple pitch detection. Some methods, before explicit recognition, rely on revealing structures in data without knowing the structures (like recognizing objects in abstract pictures without attributing them meaningful labels) by finding the least complex data representations, for instance describing audio scenes as generated by a few tone patterns and their trajectories (polyphonic voices) and acoustical contours drawn by a tone (c
Read more →
Instance selection

Instance selection (or dataset reduction, or dataset condensation) is an important data pre-processing step that can be applied in many machine learning (or data mining) tasks. Approaches for instance selection can be applied for reducing the original dataset to a manageable volume, leading to a reduction of the computational resources that are necessary for performing the learning process. Algorithms of instance selection can also be applied for removing noisy instances, before applying learning algorithms. This step can improve the accuracy in classification problems. Algorithm for instance selection should identify a subset of the total available data to achieve the original purpose of the data mining (or machine learning) application as if the whole data had been used. Considering this, the optimal outcome of IS would be the minimum data subset that can accomplish the same task with no performance loss, in comparison with the performance achieved when the task is performed using the whole available data. Therefore, every instance selection strategy should deal with a trade-off between the reduction rate of the dataset and the classification quality. == Instance selection algorithms == The literature provides several different algorithms for instance selection. They can be distinguished from each other according to several different criteria. Considering this, instance selection algorithms can be grouped in two main classes, according to what instances they select: algorithms that preserve the instances at the boundaries of classes and algorithms that preserve the internal instances of the classes. Within the category of algorithms that select instances at the boundaries it is possible to cite DROP3, ICF and LSBo. On the other hand, within the category of algorithms that select internal instances, it is possible to mention ENN and LSSm. In general, algorithm such as ENN and LSSm are used for removing harmful (noisy) instances from the dataset. They do not reduce the data as the algorithms that select border instances, but they remove instances at the boundaries that have a negative impact on the data mining task. They can be used by other instance selection algorithms, as a filtering step. For example, the ENN algorithm is used by DROP3 as the first step, and the LSSm algorithm is used by LSBo. There is also another group of algorithms that adopt different selection criteria. For example, the algorithms LDIS, CDIS and XLDIS select the densest instances in a given arbitrary neighborhood. The selected instances can include both, border and internal instances. The LDIS and CDIS algorithms are very simple and select subsets that are very representative of the original dataset. Besides that, since they search by the representative instances in each class separately, they are faster (in terms of time complexity and effective running time) than other algorithms, such as DROP3 and ICF. Besides that, there is a third category of algorithms that, instead of selecting actual instances of the dataset, select prototypes (that can be synthetic instances). In this category it is possible to include PSSA, PSDSP and PSSP. The three algorithms adopt the notion of spatial partition (a hyperrectangle) for identifying similar instances and extract prototypes for each set of similar instances. In general, these approaches can also be modified for selecting actual instances of the datasets. The algorithm ISDSP adopts a similar approach for selecting actual instances (instead of prototypes).
Read more →
Pythia (machine learning)

Pythia is an ancient text restoration model that recovers missing characters from damaged text input using deep neural networks. It was created by Yannis Assael, Thea Sommerschield, and Jonathan Prag, researchers from Google DeepMind and the University of Oxford. To study the society and the history of ancient civilisations, ancient history relies on disciplines such as epigraphy, the study of ancient inscribed texts. Hundreds of thousands of these texts, known as inscriptions, have survived to our day, but are often damaged over the centuries. Illegible parts of the text must then be restored by specialists, called epigraphists, in order to extract meaningful information from the text and use it to expand our knowledge of the context in which the text was written. Pythia takes as input the damaged text, and is trained to return hypothesised restorations of ancient Greek inscriptions, working as an assistive aid for ancient historians. Its neural network architecture works at both the character- and word-level, thereby effectively handling long-term context information, and dealing efficiently with incomplete word representations. Pythia is applicable to any discipline dealing with ancient texts (philology, papyrology, codicology) and can work in any language (ancient or modern).
Read more →
Wargame (hacking)

In hacking, a wargame (or war game) is a cyber-security challenge and mind sport in which the competitors must exploit or defend a vulnerability in a system or application, and/or gain or prevent access to a computer system. A wargame usually involves a capture the flag logic, based on pentesting, semantic URL attacks, knowledge-based authentication, password cracking, reverse engineering of software (often JavaScript, C and assembly language), code injection, SQL injections, cross-site scripting, exploits, IP address spoofing, forensics, and other hacking techniques. == Wargames for preparedness == Wargames are also used as a method of cyberwarfare preparedness. The NATO Cooperative Cyber Defence Centre of Excellence (CCDCOE) organizes an annual event, Locked Shields, which is an international live-fire cyber exercise. The exercise challenges cyber security experts through real-time attacks in fictional scenarios and is used to develop skills in national IT defense strategies. == Additional applications == Wargames can be used to teach the basics of web attacks and web security, giving participants a better understanding of how attackers exploit security vulnerabilities. Wargames are also used as a way to "stress test" an organization's response plan and serve as a drill to identify gaps in cyber disaster preparedness.
Read more →
JAX (software)

JAX is a Python library for accelerator-oriented array computation and program transformation, designed for high-performance numerical computing and large-scale machine learning. It is developed by Google with contributions from Nvidia and other community contributors. It is described as bringing together a modified version of the automatic differentiation system autograd and OpenXLA's XLA (Accelerated Linear Algebra). It is designed to follow the structure and workflow of NumPy as closely as possible and works with various existing frameworks such as TensorFlow and PyTorch. The primary features of JAX are: Providing a unified NumPy-like interface to computations that run on CPU, GPU, or TPU, in local or distributed settings. Built-in Just-In-Time (JIT) compilation via OpenXLA, an open-source machine learning compiler ecosystem. Efficient evaluation of gradients via its automatic differentiation transformations. Automatic vectorization to efficiently map functions over arrays representing batches of inputs. == Libraries using Jax == Flax Equinox Optax
Read more →
Eager learning

In artificial intelligence, eager learning is a learning method in which the system tries to construct a general, input-independent target function during training of the system, as opposed to lazy learning, where generalization beyond the training data is delayed until a query is made to the system. The main advantage gained in employing an eager learning method, such as an artificial neural network, is that the target function will be approximated globally during training, thus requiring much less space than using a lazy learning system. Eager learning systems also deal much better with noise in the training data. Eager learning is an example of offline learning, in which post-training queries to the system have no effect on the system itself, and thus the same query to the system will always produce the same result. The main disadvantage with eager learning is that it is generally unable to provide good local approximations in the target function.
Read more →
Inception score

The Inception Score (IS) is an algorithm used to assess the quality of images created by a generative image model such as a generative adversarial network (GAN). The score is calculated based on the output of a separate, pretrained Inception v3 image classification model applied to a sample of (typically around 30,000) images generated by the generative model. The Inception Score is maximized when the following conditions are true: The entropy of the distribution of labels predicted by the Inceptionv3 model for the generated images is minimized. In other words, the classification model confidently predicts a single label for each image. Intuitively, this corresponds to the desideratum of generated images being "sharp" or "distinct". The predictions of the classification model are evenly distributed across all possible labels. This corresponds to the desideratum that the output of the generative model is "diverse". It has been somewhat superseded by the related Fréchet inception distance. While the Inception Score only evaluates the distribution of generated images, the FID compares the distribution of generated images with the distribution of a set of real images ("ground truth"). == Definition == Let there be two spaces, the space of images Ω X {\displaystyle \Omega _{X}} and the space of labels Ω Y {\displaystyle \Omega _{Y}} . The space of labels is finite. Let p g e n {\displaystyle p_{gen}} be a probability distribution over Ω X {\displaystyle \Omega _{X}} that we wish to judge. Let a discriminator be a function of type p d i s : Ω X → M ( Ω Y ) {\displaystyle p_{dis}:\Omega _{X}\to M(\Omega _{Y})} where M ( Ω Y ) {\displaystyle M(\Omega _{Y})} is the set of all probability distributions on Ω Y {\displaystyle \Omega _{Y}} . For any image x {\displaystyle x} , and any label y {\displaystyle y} , let p d i s ( y | x ) {\displaystyle p_{dis}(y|x)} be the probability that image x {\displaystyle x} has label y {\displaystyle y} , according to the discriminator. It is usually implemented as an Inception-v3 network trained on ImageNet. The Inception Score of p g e n {\displaystyle p_{gen}} relative to p d i s {\displaystyle p_{dis}} is I S ( p g e n , p d i s ) := exp ⁡ ( E x ∼ p g e n [ D K L ( p d i s ( ⋅ | x ) ‖ ∫ p d i s ( ⋅ | x ) p g e n ( x ) d x ) ] ) {\displaystyle IS(p_{gen},p_{dis}):=\exp \left(\mathbb {E} _{x\sim p_{gen}}\left[D_{KL}\left(p_{dis}(\cdot |x)\|\int p_{dis}(\cdot |x)p_{gen}(x)dx\right)\right]\right)} Equivalent rewrites include ln ⁡ I S ( p g e n , p d i s ) := E x ∼ p g e n [ D K L ( p d i s ( ⋅ | x ) ‖ E x ∼ p g e n [ p d i s ( ⋅ | x ) ] ) ] {\displaystyle \ln IS(p_{gen},p_{dis}):=\mathbb {E} _{x\sim p_{gen}}\left[D_{KL}\left(p_{dis}(\cdot |x)\|\mathbb {E} _{x\sim p_{gen}}[p_{dis}(\cdot |x)]\right)\right]} ln ⁡ I S ( p g e n , p d i s ) := H [ E x ∼ p g e n [ p d i s ( ⋅ | x ) ] ] − E x ∼ p g e n [ H [ p d i s ( ⋅ | x ) ] ] {\displaystyle \ln IS(p_{gen},p_{dis}):=H[\mathbb {E} _{x\sim p_{gen}}[p_{dis}(\cdot |x)]]-\mathbb {E} _{x\sim p_{gen}}[H[p_{dis}(\cdot |x)]]} ln ⁡ I S {\displaystyle \ln IS} is nonnegative by Jensen's inequality. Pseudocode:INPUT discriminator p d i s {\displaystyle p_{dis}} . INPUT generator g {\displaystyle g} . Sample images x i {\displaystyle x_{i}} from generator. Compute p d i s ( ⋅ | x i ) {\displaystyle p_{dis}(\cdot |x_{i})} , the probability distribution over labels conditional on image x i {\displaystyle x_{i}} . Sum up the results to obtain p ^ {\displaystyle {\hat {p}}} , an empirical estimate of ∫ p d i s ( ⋅ | x ) p g e n ( x ) d x {\displaystyle \int p_{dis}(\cdot |x)p_{gen}(x)dx} . Sample more images x i {\displaystyle x_{i}} from generator, and for each, compute D K L ( p d i s ( ⋅ | x i ) ‖ p ^ ) {\displaystyle D_{KL}\left(p_{dis}(\cdot |x_{i})\|{\hat {p}}\right)} . Average the results, and take its exponential. RETURN the result. === Interpretation === A higher inception score is interpreted as "better", as it means that p g e n {\displaystyle p_{gen}} is a "sharp and distinct" collection of pictures. ln ⁡ I S ( p g e n , p d i s ) ∈ [ 0 , ln ⁡ N ] {\displaystyle \ln IS(p_{gen},p_{dis})\in [0,\ln N]} , where N {\displaystyle N} is the total number of possible labels. ln ⁡ I S ( p g e n , p d i s ) = 0 {\displaystyle \ln IS(p_{gen},p_{dis})=0} iff for almost all x ∼ p g e n {\displaystyle x\sim p_{gen}} p d i s ( ⋅ | x ) = ∫ p d i s ( ⋅ | x ) p g e n ( x ) d x {\displaystyle p_{dis}(\cdot |x)=\int p_{dis}(\cdot |x)p_{gen}(x)dx} That means p g e n {\displaystyle p_{gen}} is completely "indistinct". That is, for any image x {\displaystyle x} sampled from p g e n {\displaystyle p_{gen}} , discriminator returns exactly the same label predictions p d i s ( ⋅ | x ) {\displaystyle p_{dis}(\cdot |x)} . The highest inception score N {\displaystyle N} is achieved if and only if the two conditions are both true: For almost all x ∼ p g e n {\displaystyle x\sim p_{gen}} , the distribution p d i s ( y | x ) {\displaystyle p_{dis}(y|x)} is concentrated on one label. That is, H y [ p d i s ( y | x ) ] = 0 {\displaystyle H_{y}[p_{dis}(y|x)]=0} . That is, every image sampled from p g e n {\displaystyle p_{gen}} is exactly classified by the discriminator. For every label y {\displaystyle y} , the proportion of generated images labelled as y {\displaystyle y} is exactly E x ∼ p g e n [ p d i s ( y | x ) ] = 1 N {\displaystyle \mathbb {E} _{x\sim p_{gen}}[p_{dis}(y|x)]={\frac {1}{N}}} . That is, the generated images are equally distributed over all labels.
Read more →
Incremental heuristic search

Incremental heuristic search algorithms combine both incremental and heuristic search to speed up searches of sequences of similar search problems, which is important in domains that are only incompletely known or change dynamically. Incremental search has been studied at least since the late 1960s. Incremental search algorithms reuse information from previous searches to speed up the current search and solve search problems potentially much faster than solving them repeatedly from scratch. Similarly, heuristic search has also been studied at least since the late 1960s. Heuristic search algorithms, often based on A, use heuristic knowledge in the form of approximations of the goal distances to focus the search and solve search problems potentially much faster than uninformed search algorithms. The resulting search problems, sometimes called dynamic path planning problems, are graph search problems where paths have to be found repeatedly because the topology of the graph, its edge costs, the start vertex or the goal vertices change over time. So far, three main classes of incremental heuristic search algorithms have been developed: The first class restarts A at the point where its current search deviates from the previous one (example: Fringe Saving A). The second class updates the h-values (heuristic, i.e. approximate distance to goal) from the previous search during the current search to make them more informed (example: Generalized Adaptive A). The third class updates the g-values (distance from start) from the previous search during the current search to correct them when necessary, which can be interpreted as transforming the A search tree from the previous search into the A search tree for the current search (examples: Lifelong Planning A, D, D Lite). All three classes of incremental heuristic search algorithms are different from other replanning algorithms, such as planning by analogy, in that their plan quality does not deteriorate with the number of replanning episodes. == Applications == Incremental heuristic search has been extensively used in robotics, where a larger number of path planning systems are based on either D (typically earlier systems) or D Lite (current systems), two different incremental heuristic search algorithms.
Read more →
Lazy learning

(Not to be confused with the lazy learning regime, see Neural tangent kernel). In machine learning, lazy learning is a learning method in which generalization of the training data is, in theory, delayed until a query is made to the system, as opposed to eager learning, where the system tries to generalize the training data before receiving queries. The primary motivation for employing lazy learning, as in the K-nearest neighbors algorithm, used by online recommendation systems ("people who viewed/purchased/listened to this movie/item/tune also ...") is that the data set is continuously updated with new entries (e.g., new items for sale at Amazon, new movies to view at Netflix, new clips at YouTube, new music at Spotify or Pandora). Because of the continuous update, the "training data" would be rendered obsolete in a relatively short time especially in areas like books and movies, where new best-sellers or hit movies/music are published/released continuously. Therefore, one cannot really talk of a "training phase". Lazy classifiers are most useful for large, continuously changing datasets with few attributes that are commonly queried. Specifically, even if a large set of attributes exist - for example, books have a year of publication, author/s, publisher, title, edition, ISBN, selling price, etc. - recommendation queries rely on far fewer attributes - e.g., purchase or viewing co-occurrence data, and user ratings of items purchased/viewed. == Advantages == The main advantage gained in employing a lazy learning method is that the target function will be approximated locally, such as in the k-nearest neighbor algorithm. Because the target function is approximated locally for each query to the system, lazy learning systems can simultaneously solve multiple problems and deal successfully with changes in the problem domain. At the same time they can reuse a lot of theoretical and applied results from linear regression modelling (notably PRESS statistic) and control. It is said that the advantage of this system is achieved if the predictions using a single training set are only developed for few objects. This can be demonstrated in the case of the k-NN technique, which is instance-based and function is only estimated locally. == Disadvantages == Theoretical disadvantages with lazy learning include: The large space requirement to store the entire training dataset. In practice, this is not an issue because of advances in hardware and the relatively small number of attributes (e.g., as co-occurrence frequency) that need to be stored. Particularly noisy training data increases the case base unnecessarily, because no abstraction is made during the training phase. In practice, as stated earlier, lazy learning is applied to situations where any learning performed in advance soon becomes obsolete because of changes in the data. Also, for the problems for which lazy learning is optimal, "noisy" data does not really occur - the purchaser of a book has either bought another book or hasn't. Lazy learning methods are usually slower to evaluate. In practice, for very large databases with high concurrency loads, the queries are not postponed until actual query time, but recomputed in advance on a periodic basis - e.g., nightly, in anticipation of future queries, and the answers stored. This way, the next time new queries are asked about existing entries in the database, the answers are merely looked up rapidly instead of having to be computed on the fly, which would almost certainly bring a high-concurrency multi-user system to its knees. Larger training data also entail increased cost. Particularly, there is the fixed amount of computational cost, where a processor can only process a limited amount of training data points. There are standard techniques to improve re-computation efficiency so that a particular answer is not recomputed unless the data that impact this answer has changed (e.g., new items, new purchases, new views). In other words, the stored answers are updated incrementally. This approach, used by large e-commerce or media sites, has long been used in the Entrez portal of the National Center for Biotechnology Information (NCBI) to precompute similarities between the different items in its large datasets: biological sequences, 3-D protein structures, published-article abstracts, etc. Because "find similar" queries are asked so frequently, the NCBI uses highly parallel hardware to perform nightly recomputation. The recomputation is performed only for new entries in the datasets against each other and against existing entries: the similarity between two existing entries need not be recomputed. == Examples of Lazy Learning Methods == K-nearest neighbors, which is a special case of instance-based learning. Local regression. Lazy naive Bayes rules, which are extensively used in commercial spam detection software. Here, the spammers keep getting smarter and revising their spamming strategies, and therefore the learning rules must also be continually updated.
Read more →
GOLOG

GOLOG is a high-level logic programming language for the specification and execution of complex actions in dynamical domains. It is based on the situation calculus. It is a first-order logical language for reasoning about action and change. GOLOG was developed at the University of Toronto. == History == The concept of situation calculus on which the GOLOG programming language is based was first proposed by John McCarthy in 1963. == Description == A GOLOG interpreter automatically maintains a direct characterization of the dynamic world being modeled, on the basis of user supplied axioms about preconditions, effects of actions and the initial state of the world. This allows the application to reason about the condition of the world and consider the impacts of different potential actions before focusing on a specific action. Golog is a logic programming language and is very different from conventional programming languages. A procedural programming language like C defines the execution of statements in advance. The programmer creates a subroutine which consists of statements, and the computer executes each statement in a linear order. In contrast, fifth-generation programming languages like Golog work with an abstract model with which the interpreter can generate the sequence of actions. The source code defines the problem and it is up to the solver to find the next action. This approach can facilitate the management of complex problems from the domain of robotics. A Golog program defines the state space in which the agent is allowed to operate. A path in the symbolic domain is found with state space search. To speed up the process, Golog programs are realized as hierarchical task networks. Apart from the original Golog language, there are some extensions available. The ConGolog language provides concurrency and interrupts. Other dialects like IndiGolog and Readylog were created for real time applications in which sensor readings are updated on the fly. == Uses == Golog has been used to model the behavior of autonomous agents. In addition to a logic-based action formalism for describing the environment and the effects of basic actions, they enable the construction of complex actions using typical programming language constructs. It is also used for applications in high level control of robots and industrial processes, virtual agents, discrete event simulation etc. It can be also used to develop Belief Desire Intention-style agent systems. == Planning and scripting == In contrast to the Planning Domain Definition Language, Golog supports planning and scripting as well. Planning means that a goal state in the world model is defined, and the solver brings a logical system into this state. Behavior scripting implements reactive procedures, which are running as a computer program. For example, suppose the idea is to authoring a story. The user defines what should be true at the end of the plot. A solver gets started and applies possible actions to the current situation until the goal state is reached. The specification of a goal state and the possible actions are realized in the logical world model. In contrast, a hardwired reactive behavior doesn't need a solver but the action sequence is provided in a scripting language. The Golog interpreter, which is written in Prolog, executes the script and this will bring the story into the goal state.
Read more →