AI Assistant For Writing

AI Assistant For Writing — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Discrete skeleton evolution

  Discrete Skeleton Evolution (DSE) describes an iterative approach to reducing a morphological or topological skeleton. It is a form of pruning in that it removes noisy or redundant branches (spurs) generated by the skeletonization process, while preserving information-rich "trunk" segments. The value assigned to individual branches varies from algorithm to algorithm, with the general goal being to convey the features of interest of the original contour with a few carefully chosen lines. Usually, clarity for human vision (aka. the ability to "read" some features of the original shape from the skeleton) is valued as well. DSE algorithms are distinguished by complex, recursive decision-making processes with high computational requirements. Pruning methods such as by structuring element (SE) convolution and the Hough transform are general purpose algorithms which quickly pass through an image and eliminate all branches shorter than a given threshold. DSE methods are most applicable when detail retention and contour reconstruction are valued. == Methodology == === Pre-processing === Input images will typical contain more data than is necessary to generate an initial skeleton, and thus must be reduced in some way. Reducing the resolution, converting to grayscale, and then binary by masking or thresholding are common first steps. Noise removal may occur before and/or after converting an image to binary. Morphological operations such as closing, opening, and smoothing of the binary image may also be part of pre-processing. Ideally, the binarized contour should be as noise-free as possible before the skeleton is generated. === Skeletonization === DSE techniques may be applied to an existing skeleton or incorporated as part of the skeleton growing algorithm. Suitable skeletons may be obtained using a variety of methods: Thinning algorithms, such as the Grassfire transform Voronoi diagram Medial Axis Transform or Symmetry Axis Transform Distance Mapping === Significance Measures === DSE and related methods remove entire spurious branches while leaving the main trunk intact. The intended result is typically optimized for visual clarity and retention of information, such that the original contour can be reconstructed from the fully pruned skeleton. The value of various properties must be weighted by the application, and improving the efficiency is an ongoing topic of research in computer vision and image processing. Some significance measures include: Discrete Bisector Function Contour length Bending Potential Ratio Discrete Curve Evolution === Iteration === Each branch is evaluated during a pass through the skeletonized image according to the specific algorithm being used. Low value branches are removed and the process is repeated until a desired threshold of simplicity is reached. === Reconstruction === If all points on the output skeleton are the center points of maximal disks of the image and the radius information is retained, a contour image can be reconstructed == Applications == === Handwriting and text parsing === Variability in hand-written text is an ongoing challenge, simplification makes it somewhat easier for computer vision algorithms to make judgements about intended characters. === Soft body classification (animals) === The maximal disks centered on the skeleton imply roughly spherical masses, the features of the extracted skeleton are relatively unchanged even as the soft body deforms or self-occludes. Skeleton information is one facet of determining whether two animals are the "same" some way, though it must usually be paired with another technique to effectively identify a target. === Medical uses === Investigation of organs, tissue damage and deformation caused by disease.

  Read more →
• 

  Symmetric Boolean function

  In mathematics, a symmetric Boolean function is a Boolean function whose value does not depend on the order of its input bits, i.e., it depends only on the number of ones (or zeros) in the input. For this reason they are also known as Boolean counting functions. There are 2n+1 symmetric n-ary Boolean functions. Instead of the truth table, traditionally used to represent Boolean functions, one may use a more compact representation for an n-variable symmetric Boolean function: the (n + 1)-vector, whose i-th entry (i = 0, ..., n) is the value of the function on an input vector with i ones. Mathematically, the symmetric Boolean functions correspond one-to-one with the functions that map n+1 elements to two elements, f : { 0 , 1 , . . . , n } → { 0 , 1 } {\displaystyle f:\{0,1,...,n\}\rightarrow \{0,1\}} . Symmetric Boolean functions are used to classify Boolean satisfiability problems. == Special cases == A number of special cases are recognized: Majority function: their value is 1 on input vectors with more than n/2 ones Threshold functions: their value is 1 on input vectors with k or more ones for a fixed k All-equal and not-all-equal function: their values is 1 when the inputs do (not) all have the same value Exact-count functions: their value is 1 on input vectors with k ones for a fixed k One-hot or 1-in-n function: their value is 1 on input vectors with exactly one one One-cold function: their value is 1 on input vectors with exactly one zero Congruence functions: their value is 1 on input vectors with the number of ones congruent to k mod m for fixed k, m Parity function: their value is 1 if the input vector has odd number of ones The n-ary versions of AND, OR, XOR, NAND, NOR and XNOR are also symmetric Boolean functions. == Properties == In the following, f k {\displaystyle f_{k}} denotes the value of the function f : { 0 , 1 } n → { 0 , 1 } {\displaystyle f:\{0,1\}^{n}\rightarrow \{0,1\}} when applied to an input vector of weight k {\displaystyle k} . === Weight === The weight of the function can be calculated from its value vector: | f | = ∑ k = 0 n ( n k ) f k {\displaystyle |f|=\sum _{k=0}^{n}{\binom {n}{k}}f_{k}} === Algebraic normal form === The algebraic normal form either contains all monomials of certain order m {\displaystyle m} , or none of them; i.e. the Möbius transform f ^ {\displaystyle {\hat {f}}} of the function is also a symmetric function. It can thus also be described by a simple (n+1) bit vector, the ANF vector f ^ m {\displaystyle {\hat {f}}_{m}} . The ANF and value vectors are related by a Möbius relation: f ^ m = ⨁ k 2 ⊆ m 2 f k {\displaystyle {\hat {f}}_{m}=\bigoplus _{k_{2}\subseteq m_{2}}f_{k}} where k 2 ⊆ m 2 {\displaystyle k_{2}\subseteq m_{2}} denotes all the weights k whose base-2 representation is covered by the base-2 representation of m (a consequence of Lucas’ theorem). Effectively, an n-variable symmetric Boolean function corresponds to a log(n)-variable ordinary Boolean function acting on the base-2 representation of the input weight. For example, for three-variable functions: f ^ 0 = f 0 f ^ 1 = f 0 ⊕ f 1 f ^ 2 = f 0 ⊕ f 2 f ^ 3 = f 0 ⊕ f 1 ⊕ f 2 ⊕ f 3 {\displaystyle {\begin{array}{lcl}{\hat {f}}_{0}&=&f_{0}\\{\hat {f}}_{1}&=&f_{0}\oplus f_{1}\\{\hat {f}}_{2}&=&f_{0}\oplus f_{2}\\{\hat {f}}_{3}&=&f_{0}\oplus f_{1}\oplus f_{2}\oplus f_{3}\end{array}}} So the three variable majority function with value vector (0, 0, 1, 1) has ANF vector (0, 0, 1, 0), i.e.: Maj ( x , y , z ) = x y ⊕ x z ⊕ y z {\displaystyle {\text{Maj}}(x,y,z)=xy\oplus xz\oplus yz} === Unit hypercube polynomial === The coefficients of the real polynomial agreeing with the function on { 0 , 1 } n {\displaystyle \{0,1\}^{n}} are given by: f m ∗ = ∑ k = 0 m ( − 1 ) | k | + | m | ( m k ) f k {\displaystyle f_{m}^{}=\sum _{k=0}^{m}(-1)^{|k|+|m|}{\binom {m}{k}}f_{k}} For example, the three variable majority function polynomial has coefficients (0, 0, 1, -2): Maj ( x , y , z ) = ( x y + x z + y z ) − 2 ( x y z ) {\displaystyle {\text{Maj}}(x,y,z)=(xy+xz+yz)-2(xyz)} == Examples ==

  Read more →
• 

  Social Media Working Group Act of 2014

  The Social Media Working Group Act of 2014 (H.R. 4263) is a bill that would direct the United States Secretary of Homeland Security to establish within the United States Department of Homeland Security (DHS) a social media working group (the Group) to provide guidance and best practices to the emergency preparedness and response community on the use of social media technologies before, during, and after a terrorist attack. The bill was introduced into the United States House of Representatives during the 113th United States Congress. == Background == === Social media === Social media is the social interaction among people in which they create, share or exchange information and ideas in virtual communities and networks. Andreas Kaplan and Michael Haenlein define social media as "a group of Internet-based applications that build on the ideological and technological foundations of Web 2.0, and that allow the creation and exchange of user-generated content." Furthermore, social media depend on mobile and web-based technologies to create highly interactive platforms through which individuals and communities share, co-create, discuss, and modify user-generated content. They introduce substantial and pervasive changes to communication between organizations, communities, and individuals. Social media differ from traditional or industrial media in many ways, including quality, reach, frequency, usability, immediacy, and permanence. === Virtual Social Media Working Group === First responders have increasingly used social media in emergency response and recovery operations. Social media tools are used to connect with citizens after a disaster and share information. The Virtual Social Media Working group (VSMWG) is an online platform that gives advice to first responders on how to safely and effectively use social media in emergency response operations. The working group is made up of subject matter experts from across the U.S. It was created by DHS in December 2010 and gives first responders guidance and best practices regarding the use of social media during emergencies. The DHS S&T and the VSMWG work with local and state governments, academics and nonprofits. Meetings of the VSMWG are chaired by the Under Secretary of Homeland Security for Science and Technology. == Provisions of the bill == This summary is based largely on the summary provided by the Congressional Research Service, a public domain source. The Social Media Working Group Act of 2014 would amend the Homeland Security Act of 2002 to direct the United States Secretary of Homeland Security to establish within the United States Department of Homeland Security (DHS) a social media working group (the Group) to provide guidance and best practices to the emergency preparedness and response community on the use of social media technologies before, during, and after a terrorist attack. The bill would require the Group to submit an annual report that includes: (1) a review of current and emerging social media technologies being used to support preparedness and response activities related to terrorist attacks, of best practices and lessons learned on the use of social media during the response to terrorist attacks that occurred during the period covered by the report, and of available training for government officials on the use of social media in response to a terrorist attack; (2) recommendations to improve DHS's use of social media and to improve information sharing among DHS and its components and among state and local governments; and (3) a summary of coordination efforts with the private sector to discuss and resolve legal, operational, technical, privacy, and security concerns. == Congressional Budget Office report == This summary is based largely on the summary provided by the Congressional Budget Office, as ordered reported by the House Committee on Homeland Security on June 11, 2014. This is a public domain source. H.R. 4263 would direct the Department of Homeland Security (DHS) to establish a working group to provide guidance and best practices on the use of social media technologies, specifically during a terrorist attack or other emergency. The group would prepare guidance for the emergency preparedness and response community. The bill would define the membership of the working group, which would include more than 20 experts from federal, state, local, and tribal governments along with nongovernmental organizations. The working group would be exempt from the Federal Advisory Committee Act and would be authorized to hold virtual meetings to fulfill the requirement to meet twice a year. The working group would be required to submit an annual report on emerging trends and best practices for emergency response through social media. Based on the cost of similar activities carried out under the DHS Acquisition and Accountability Efficiency Act and the Critical Infrastructure Research and Development Advancement Act of 2013, the Congressional Budget Office (CBO) estimates that the new DHS responsibilities and the annual report required by H.R. 4263 would cost a total of less than $500,000 annually, assuming the availability of appropriated funds. Enacting the legislation would not affect direct spending or revenues; therefore, pay-as-you-go procedures do not apply. H.R. 4263 contains no intergovernmental or private-sector mandates as defined in the Unfunded Mandates Reform Act and would impose no costs on state, local, or tribal governments. == Procedural history == The Social Media Working Group Act of 2014 was introduced into the United States House of Representatives on March 14, 2014, by Rep. Susan W. Brooks (R, IN-5). It was referred to the United States House Committee on Homeland Security and the United States House Homeland Security Subcommittee on Emergency Preparedness, Response, and Communications. On June 19, 2014, it was reported (amended) alongside House Report 113-480. On July 8, 2014, the House voted in Roll Call Vote 369 to pass the bill 375–19. == Debate and discussion == Nate Elliott, a social media expert at Forrester Research, explains that "the hope is when government or another authority tweets something, people will share it for them," but that this often doesn't happen. This problem, that "messages wash away very quickly," is the reason that the federal government is trying to formulate a better social media strategy. Rep. Steven Palazzo (R-MS), who co-sponsored the bill, stated that "social media has played a crucial role in emergency preparedness and response in Mississippi, including during disasters like Hurricane Isaac and the tornadoes that hit the Hattiesburg area a little over a year ago." He said that their goal with the bill was to "build upon existing public-private partnerships and use social media in a more strategic way in order to help save lives and property."

  Read more →
• 

  Protecting Our Kids from Social Media Addiction Act

  Protecting Our Kids from Social Media Addiction Act also known as California SB 976 is a law that was enacted in September 2024 that is meant to address problematic social media usage among minors. The law prohibitions minors to have "addictive feeds" unless they have verifiable parental consent, minor's notifications are also restricted between 12 am to 6 am and during school hours between 8 am and 3 pm it also well requires minors to have default privacies settings and have social media companies to publicly disclose certain metrics about their users. The law was set to take effect in two steps the first being the restrictions on social media feeds, notifications, disclosures from social media companies and default settings which would have taken effect on January 1, 2025, and the age verification provision which would have taken effect on January 1, 2027. However, has faced legal challenges since its enactment delaying its enactment. == Legal Challenges == In November 2024 NetChoice a trade association representing many of the biggest social media companies such as YouTube, Facebook and Instagram sued the attorney general of California Rob Bonta hoping to get an injunction before the first set of the law's provisions would take effect in January of the next year. However, judge Edward Davila would only grant Netchoice's request as to the restrictions on notifications and public disclosures and would deny their request as to the rest of the law. The law was later fully enjoined temporarily by the District Court and Appellant Court pending appeal, and the case is now in the Ninth Circuit Court of Appeals and is pending a decision. === Social media platforms challenges to law === In November 2025 Meta, Google and TikTok filed lawsuits against the law arguing it violates the first amendment.

  Read more →
• 

  Fabric computing

  Fabric computing or unified computing involves constructing a computing fabric consisting of interconnected nodes that look like a weave or a fabric when seen collectively from a distance. Usually the phrase refers to a consolidated high-performance computing system consisting of loosely coupled storage, networking and parallel processing functions linked by high bandwidth interconnects (such as 10 Gigabit Ethernet and InfiniBand) but the term has also been used to describe platforms such as the Azure Services Platform and grid computing in general (where the common theme is interconnected nodes that appear as a single logical unit). The fundamental components of fabrics are "nodes" (processor(s), memory, and/or peripherals) and "links" (functional connections between nodes). While the term "fabric" has also been used in association with storage area networks and with switched fabric networking, the introduction of compute resources provides a complete "unified" computing system. Other terms used to describe such fabrics include "unified fabric", "data center fabric" and "unified data center fabric". Ian Foster, director of the Computation Institute at the Argonne National Laboratory and University of Chicago suggested in 2007 that grid computing "fabrics" were "poised to become the underpinning for next-generation enterprise IT architectures and be used by a much greater part of many organizations". == History == While the term has been in use since the mid to late 1990s the growth of cloud computing and Cisco's evangelism of unified data center fabrics followed by unified computing (an evolutionary data center architecture whereby blade servers are integrated or unified with supporting network and storage infrastructure) starting March 2009 has renewed interest in the technology. There have been mixed reactions to Cisco's architecture, particularly from rivals who claim that these proprietary systems will lock out other vendors. Analysts claim that this "ambitious new direction" is "a big risk" as companies such as IBM and HP who have previously partnered with Cisco on data center projects (accounting for $2–3bn of Cisco's annual revenue) are now competing with them. In 2007, Wombat Financial Software launched the "Wombat Data Fabric," the first commercial off-the-shelf software platform providing high performance / low-latency RDMA-based messaging across an Infiniband switch. == Key characteristics == The main advantages of fabrics are that massive concurrent processing combined with a huge, tightly coupled address space makes it possible to solve huge computing problems (such as those presented by delivery of cloud computing services); and that they are both scalable and able to be dynamically reconfigured. Challenges include a non-linearly degrading performance curve, whereby adding resources does not linearly increase performance which is a common problem with parallel computing and maintaining security. == Companies == As of 2015 companies offering unified or fabric computing systems include Avaya, Brocade, Cisco, Dell, Egenera, HPE, IBM, Liquid Computing Corporation, TIBCO, Unisys, and Xsigo Systems.

  Read more →
• 

  Media engagement framework

  The media engagement framework is a planning framework used by marketing professionals to understand the behavior of social media marketing-based audiences. The construct was introduced in the book, ROI of Social Media. Powell’s background in marketing ROI and Groves' experience and understanding of the applications of social media in business led to a collaboration. Dimos joined as a brand strategist for Litmus Group, a global management consulting firm. The media engagement framework consists of the definitions of personas (Individuals, Consumers and Influencers), referenced by the competitive set or constraint that applies to that persona and the measurement framework that might be applied to those personas. It is referenced at the center of the marketing process diagram, surrounded by the marketing functions of strategy, tactics, metrics and ROI. The marketing process diagram describes how the media engagement framework can apply to any strategic marketing activity but was developed to establish a completely integrated framework describing how both traditional and social media marketing activities can be planned, executed, measured and improved. == Application == The media engagement framework provides a strategic planning construct in which measurements and metrics play a crucial role. Applying the media engagement framework aids in the development and management of an effective online marketing presence leveraging social media to engage a market or audience. By first personifying the audience, the marketer is able to identify the limiting aspect of the engagements possible with that audience segment and then, understand the type of engagement metrics to apply. Each persona makes decisions differently about how he/she acts in the social media universe. A framework metric can be applied for each of these personas: Endorsement funnel for influencers Community engagement funnel for individuals Purchase funnel for consumers Individuals, influencers and consumers make decisions based on alternatives available to them and constraints put on them. To engage with an individual brands must realize they are competing against the time an individual spends on line. If they find something else more engaging, they will engage with that activity. Brands compete against other brands for the purchases of consumers acting in the category. Lastly, influencers have only so many endorsements they can make and therefore brands compete with other endorsers for the endorsement of an influencer. Creating engaging content by keeping target audience in mind like create content that audience find it funny, interesting, and relatable will encourage audience to share it on social networks. Which will be beneficial for you brand, getting more people to know about your business and brand. Contact Digilord to create engaging content for your brand. Use of listening tools (Google Alerts, Twitter Search, SocialMention.com, Veooz.com, Alterian SM2, Radian6, Sysomos, Buzzient etc.) can be employed within the model to help identify the members of the audience segment and to support the formation of other social engagement planning and management tools.

  Read more →
• 

  Electronic lab notebook

  An electronic lab notebook or electronic laboratory notebook (ELN) is a computer program designed to replace paper laboratory notebooks. Lab notebooks in general are used by scientists, engineers, and technicians to document research, experiments, and procedures performed in a laboratory. A lab notebook is often maintained to be a legal document and may be used in a court of law as evidence. Similar to an inventor's notebook, the lab notebook is also often referred to in patent prosecution and intellectual property litigation. Electronic lab notebooks offer many benefits to the user as well as organizations; they are easier to search upon, simplify data copying and backups, and support collaboration amongst many users. ELNs can have fine-grained access controls, and can be more secure than their paper counterparts. They also allow the direct incorporation of data from instruments, replacing the practice of printing out data to be stapled into a paper notebook. == Types == ELNs can be divided into two categories: "Specific ELNs" contain features designed to work with specific applications, scientific instrumentation or data types. "Cross-disciplinary ELNs" or "Generic ELNs" are designed to support access to all data and information that needs to be recorded in a lab notebook. Lab Platforms that combine an ELN, LIMS, and scientific data management together, all-in-one configurable software environment. Solutions range from specialized programs designed from the ground up for use as an ELN, to modifications or direct use of more general programs. Examples of using more general software as an ELN include using OpenWetWare, a MediaWiki install (running the same software that Wikipedia uses), WordPress, or the use of general note taking software such as OneNote as an ELN. ELN's come in many different forms. They can be standalone programs, use a client-server model, or be entirely web-based. Some use a lab-notebook approach, others resemble a blog. ELNs are embracing artificial intelligence and LLM technology to provide scientific AI chat assistants. A good many variations on the "ELN" acronym have appeared. Differences between systems with different names are often subtle, with considerable functional overlap between them. Examples include "ERN" (Electronic Research Notebook), "ERMS" (Electronic Resource (or Research or Records) Management System (or Software) and SDMS (Scientific Data (or Document) Management System (or Software). Ultimately, these types of systems all strive to do the same thing: Capture, record, centralize and protect scientific data in a way that is highly searchable, historically accurate, and legally stringent, and which also promotes secure collaboration, greater efficiency, reduced mistakes and lowered total research costs. == Objectives == A good electronic laboratory notebook should offer a secure environment to protect the integrity of both data and process, whilst also affording the flexibility to adopt new processes or changes to existing processes without recourse to further software development. The package architecture should be a modular design, so as to offer the benefit of minimizing validation costs of any subsequent changes that you may wish to make in the future as your needs change. A good electronic laboratory notebook should be an "out of the box" solution that, as standard, has fully configurable forms to comply with the requirements of regulated analytical groups through to a sophisticated ELN for inclusion of structures, spectra, chromatograms, pictures, text, etc. where a preconfigured form is less appropriate. All data within the system may be stored in a database (e.g. MySQL, MS-SQL, Oracle) and be fully searchable. The system should enable data to be collected, stored and retrieved through any combination of forms or ELN that best meets the requirements of the user. The application should enable secure forms to be generated that accept laboratory data input via PCs and/or laptops / palmtops, and should be directly linked to electronic devices such as laboratory balances, pH meters, etc. Networked or wireless communications should be accommodated for by the package which will allow data to be interrogated, tabulated, checked, approved, stored and archived to comply with the latest regulatory guidance and legislation. A system should also include a scheduling option for routine procedures such as equipment qualification and study related timelines. It should include configurable qualification requirements to automatically verify that instruments have been cleaned and calibrated within a specified time period, that reagents have been quality-checked and have not expired, and that workers are trained and authorized to use the equipment and perform the procedures. == Regulatory and legal aspects == The laboratory accreditation criteria found in the ISO 17025 standard needs to be considered for the protection and computer backup of electronic records. These criteria can be found specifically in clause 4.13.1.4 of the standard. Electronic lab notebooks used for development or research in regulated industries, such as medical devices or pharmaceuticals, are expected to comply with FDA regulations related to software validation. The purpose of the regulations is to ensure the integrity of the entries in terms of time, authorship, and content. Unlike ELNs for patent protection, FDA is not concerned with patent interference proceedings, but is concerned with avoidance of falsification. Typical provisions related to software validation are included in the medical device regulations at 21 CFR 820 (et seq.) and Title 21 CFR Part 11. Essentially, the requirements are that the software has been designed and implemented to be suitable for its intended purposes. Evidence to show that this is the case is often provided by a Software Requirements Specification (SRS) setting forth the intended uses and the needs that the ELN will meet; one or more testing protocols that, when followed, demonstrate that the ELN meets the requirements of the specification and that the requirements are satisfied under worst-case conditions. Security, audit trails, prevention of unauthorized changes without substantial collusion of otherwise independent personnel (i.e., those having no interest in the content of the ELN such as independent quality unit personnel) and similar tests are fundamental. Finally, one or more reports demonstrating the results of the testing in accordance with the predefined protocols are required prior to release of the ELN software for use. If the reports show that the software failed to satisfy any of the SRS requirements, then corrective and preventive action ("CAPA") must be undertaken and documented. Such CAPA may extend to minor software revisions, or changes in architecture or major revisions. CAPA activities need to be documented as well. Aside from the requirements to follow such steps for regulated industry, such an approach is generally a good practice in terms of development and release of any software to assure its quality and fitness for use. There are standards related to software development and testing that can be applied (see ref.).

  Read more →
• 

  PGP word list

  The PGP Word List ("Pretty Good Privacy word list", also called a biometric word list for reasons explained below) is a list of words for conveying data bytes in a clear unambiguous way via a voice channel. They are analogous in purpose to the NATO phonetic alphabet, except that a longer list of words is used, each word corresponding to one of the 256 distinct numeric byte values. == History and structure == The PGP Word List was designed in 1995 by Patrick Juola, a computational linguist, and Philip Zimmermann, creator of PGP. The words were carefully chosen for their phonetic distinctiveness, using genetic algorithms to select lists of words that had optimum separations in phoneme space. The candidate word lists were randomly drawn from Grady Ward's Moby Pronunciator list as raw material for the search, successively refined by the genetic algorithms. The automated search converged to an optimized solution in about 40 hours on a DEC Alpha, a particularly fast machine in that era. The Zimmermann–Juola list was originally designed to be used in PGPfone, a secure VoIP application, to allow the two parties to verbally compare a short authentication string to detect a man-in-the-middle attack (MiTM). It was called a biometric word list because the authentication depended on the two human users recognizing each other's distinct voices as they read and compared the words over the voice channel, binding the identity of the speaker with the words, which helped protect against the MiTM attack. The list can be used in many other situations where a biometric binding of identity is not needed, so calling it a biometric word list may be imprecise. Later, it was used in PGP to compare and verify PGP public key fingerprints over a voice channel. This is known in PGP applications as the "biometric" representation. When it was applied to PGP, the list of words was further refined, with contributions by Jon Callas. More recently, it has been used in Zfone and the ZRTP protocol, the successor to PGPfone. The list is actually composed of two lists, each containing 256 phonetically distinct words, in which each word represents a different byte value between 0 and 255. Two lists are used because reading aloud long random sequences of human words usually risks three kinds of errors: 1) transposition of two consecutive words, 2) duplicate words, or 3) omitted words. To detect all three kinds of errors, the two lists are used alternately for the even-offset bytes and the odd-offset bytes in the byte sequence. Each byte value is actually represented by two different words, depending on whether that byte appears at an odd or an even offset from the beginning of the byte sequence. The two lists are readily distinguished by the number of syllables; the odd list has words of three syllables, the even list has two. The two lists have a maximum word length of 11 and 9 letters, respectively. Using a two-list scheme was suggested by Zhahai Stewart. == Examples == Each byte in a bytestring is encoded as a single word. A sequence of bytes is rendered in network byte order, from left to right. For example, the leftmost (i.e. byte 0) is considered "even" and is encoded using the PGP Even Word table. The next byte to the right (i.e. byte 1) is considered "odd" and is encoded using the PGP Odd Word table. This process repeats until all bytes are encoded. Thus, "E582" produces "topmost Istanbul", whereas "82E5" produces "miser travesty". A PGP public key fingerprint that displayed in hexadecimal as E582 94F2 E9A2 2748 6E8B 061B 31CC 528F D7FA 3F19 would display in PGP Words (the "biometric" fingerprint) as topmost Istanbul Pluto vagabond treadmill Pacific brackish dictator goldfish Medusa afflict bravado chatter revolver Dupont midsummer stopwatch whimsical cowbell bottomless The order of bytes in a bytestring depends on endianness. == Other word lists for data == There are several other word lists for conveying data in a clear unambiguous way via a voice channel: the NATO phonetic alphabet maps individual letters and digits to individual words the S/KEY system maps 64 bit numbers to 6 short words of 1 to 4 characters each from a publicly accessible 2048-word dictionary. The same dictionary is used in RFC 1760 and RFC 2289. the Diceware system maps five base-6 random digits (almost 13 bits of entropy) to a word from a dictionary of 7,776 distinct words. the Electronic Frontier Foundation has published a set of improved word lists based on the same concept FIPS 181: Automated Password Generator converts random numbers into somewhat pronounceable "words". mnemonic encoding converts 32 bits of data into 3 words from a vocabulary of 1626 words. what3words encodes geographic coordinates in 3 dictionary words. the BIP39 standard permits encoding a cryptographic key of fixed size (128 or 256 bits, usually the unencrypted master key of a Cryptocurrency wallet) into a short sequence of readable words known as the seed phrase, for the purpose of storing the key offline. This is used in cryptocurrencies such as Bitcoin or Monero. Like the PGP word list, the Bytewords standard maps each possible byte to a word. There is only one list, rather than two. The words are uniformly four letters long and can be uniquely identified by their first and last letters

  Read more →
• 

  Blobotics

  Blobotics is a term describing research into chemical-based computer processors based on ions rather than electrons. Andrew Adamatzky, a computer scientist at the University of the West of England, Bristol used the term in an article in New Scientist March 28, 2005 [1]. The aim is to create 'liquid logic gates' which would be 'infinitely reconfigurable and self-healing'. The process relies on the Belousov–Zhabotinsky reaction, a repeating cycle of three separate sets of reactions. Such a processor could form the basis of a robot which, using artificial sensors, interact with its surroundings in a way which mimics living creatures. The coining of the term was featured by ABC radio in Australia [2].

  Read more →
• 

  AS1 (networking)

  AS1 (Applicability Statement 1) is a specification about how to transport structured business-to-business data securely and reliably over the Internet. Security is achieved by using digital certificates and encryption. == AS1 technical overview == The AS1 protocol is based on SMTP and S/MIME. It was the first AS protocol developed and uses signing, encryption and MDN conventions. In other words: Files are sent as "attachments" in a specially coded SMIME email message Messages can be signed, but do not have to be Messages can be encrypted, but do not have to be Messages may request an MDN back if all went well, but do not have to request such a message If the original AS1 message requested an MDN... Upon the receipt of the message and its successful decryption or signature validation (as necessary) a "success" MDN will be sent back to the original sender. This MDN is typically signed but not encrypted. Upon the receipt and successful verification of the signature on the MDN, the original sender will "know" that the recipient got their message (this provides the "Non-repudiation" element of AS1) If there are any problems receiving or interpreting the original AS1 message, a "failed" MDN may be sent back. Like any other AS file transfer, AS1 file transfers typically require both sides of the exchange to trade X.509 certificates and specific "trading partner" names before any transfers can take place.

  Read more →
• 

  Upworthy

  Upworthy is a media brand that focuses on positive storytelling. It was started in March 2012 by Eli Pariser, the former executive director of MoveOn, and Peter Koechley, the former managing editor of The Onion. One of Facebook's co-founders, Chris Hughes, was an early investor. At its peak between 2012 and 2014, it reached up to 100 million people a month. In 2017, the company was acquired by Good Worldwide. == History == Upworthy was launched in 2012 with a focus on aggregating positive content, which aligned with Facebook's algorithm. Originally, Upworthy curators searched the internet for existing content to feature on the site. Once selected as an option, curators brainstormed different headlines and shareable images for the content, and tested it with a small sample of Upworthy's visitors before sharing it on the site. The site popularized a clickbait style of two-phrase headlines. The company simplifies issues that are controversial by nature, which are presented from a politically liberal point of view and are heavily fact-checked for accuracy. In June 2013, an article in Fast Company called Upworthy "the fastest growing media site of all time". It had 8.7 million unique monthly visitors in the first six months, and in November 2013, had a high of 87 million unique visitors in a single month. In 2013, Facebook changed its algorithm, leading to a significant decline in readers from that platform. Upworthy fired one round of writers in 2015, and another in 2016, after an unionization effort by some of the staff. The union involved, the Writers Guild of America, East, has organized several online "viral" news publishers. In January 2017, Upworthy was acquired by media company GOOD Worldwide. The newsrooms of the two organizations would merge as part of the acquisition. About 20 staffers were laid off as part of the merger. In March 2020, Upworthy saw a 65% increase in Instagram followers and a 47% increased interest in positive content on-site page views as a result of increased interest in positive content during the COVID-19 pandemic. In January 2023, National Geographic Books bought Good People: Stories From the Best of Humanity from Upworthy, with a publication date of September 3, 2024. The book is described as "a heartwarming collection of first-person tales that will provide comfort and inspiration to anyone who could use a little dose of joy right now". It was created by two senior Upworthy team members, Gabriel Reilich and Lucia Knell, and features 101 stories from Upworthy's audience. The co-creators encouraged Upworthy followers to connect with the brand through questions on their posts, opening the door for organic and personal stories to be shared in the comment sections. The book debuted on The New York Times nonfiction bestseller list on September 22, 2024, and remained on the list for two weeks. The book is seen in the top 10 on Publishers Weekly Fall 2024 Adult Preview: Lifestyle and on The Washington Post's "5 feel-good books".

  Read more →
• 

  Trace zero cryptography

  First proposed by Gerhard Frey in 1998, trace zero cryptography refers to the use of trace zero varieties (TZV) for cryptographic purpose. Trace zero varieties are subgroups of the divisor class group on a low genus hyperelliptic curve defined over a finite field. These groups can be used to establish asymmetric cryptography using the discrete logarithm problem as cryptographic primitive. Trace zero varieties feature a better scalar multiplication performance than elliptic curves. This allows fast arithmetic in these groups, which can speed up the calculations with a factor 3 compared with elliptic curves and hence speed up the cryptosystem. Another advantage is that for groups of cryptographically relevant size, the order of the group can simply be calculated using the characteristic polynomial of the Frobenius endomorphism. This is not the case, for example, in elliptic curve cryptography when the group of points of an elliptic curve over a prime field is used for cryptographic purpose. However, to represent an element of the trace zero variety more bits are needed compared with elements of elliptic or hyperelliptic curves. Another disadvantage is the fact that it is possible to reduce the security of the TZV of 1/6th of the bit length using cover attack. == Mathematical background == A hyperelliptic curve C of genus g over a prime field F q {\displaystyle \mathbb {F} _{q}} where q = pn (p prime) of odd characteristic is defined as C : y 2 + h ( x ) y = f ( x ) , {\displaystyle C:~y^{2}+h(x)y=f(x),} where f monic, deg(f) = 2g + 1 and deg(h) ≤ g. The curve has at least one F q {\displaystyle \mathbb {F} _{q}} -rational Weierstraßpoint. The Jacobian variety J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} of C is for all finite extension F q n {\displaystyle \mathbb {F} _{q^{n}}} isomorphic to the ideal class group Cl ⁡ ( C / F q n ) {\displaystyle \operatorname {Cl} (C/\mathbb {F} _{q^{n}})} . With the Mumford's representation it is possible to represent the elements of J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} with a pair of polynomials [u, v], where u, v ∈ F q n [ x ] {\displaystyle \mathbb {F} _{q^{n}}[x]} . The Frobenius endomorphism σ is used on an element [u, v] of J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} to raise the power of each coefficient of that element to q: σ([u, v]) = [uq(x), vq(x)]. The characteristic polynomial of this endomorphism has the following form: χ ( T ) = T 2 g + a 1 T 2 g − 1 + ⋯ + a g T g + ⋯ + a 1 q g − 1 T + q g , {\displaystyle \chi (T)=T^{2g}+a_{1}T^{2g-1}+\cdots +a_{g}T^{g}+\cdots +a_{1}q^{g-1}T+q^{g},} where ai in Z {\displaystyle \mathbb {Z} } With the Hasse–Weil theorem it is possible to receive the group order of any extension field F q n {\displaystyle \mathbb {F} _{q^{n}}} by using the complex roots τi of χ(T): | J C ( F q n ) | = ∏ i = 1 2 g ( 1 − τ i n ) {\displaystyle |J_{C}(\mathbb {F} _{q^{n}})|=\prod _{i=1}^{2g}(1-\tau _{i}^{n})} Let D be an element of the J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} of C, then it is possible to define an endomorphism of J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} , the so-called trace of D: Tr ⁡ ( D ) = ∑ i = 0 n − 1 σ i ( D ) = D + σ ( D ) + ⋯ + σ n − 1 ( D ) {\displaystyle \operatorname {Tr} (D)=\sum _{i=0}^{n-1}\sigma ^{i}(D)=D+\sigma (D)+\cdots +\sigma ^{n-1}(D)} Based on this endomorphism one can reduce the Jacobian variety to a subgroup G with the property, that every element is of trace zero: G = { D ∈ J C ( F q n ) | Tr ( D ) = 0 } , ( 0 neutral element in J C ( F q n ) {\displaystyle G=\{D\in J_{C}(\mathbb {F} _{q^{n}})~|~{\text{Tr}}(D)={\textbf {0}}\},~~~({\textbf {0}}{\text{ neutral element in }}J_{C}(\mathbb {F} _{q^{n}})} G is the kernel of the trace endomorphism and thus G is a group, the so-called trace zero (sub)variety (TZV) of J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} . The intersection of G and J C ( F q ) {\displaystyle J_{C}(\mathbb {F} _{q})} is produced by the n-torsion elements of J C ( F q ) {\displaystyle J_{C}(\mathbb {F} _{q})} . If the greatest common divisor gcd ( n , | J C ( F q ) | ) = 1 {\displaystyle \gcd(n,|J_{C}(\mathbb {F} _{q})|)=1} the intersection is empty and one can compute the group order of G: | G | = | J C ( F q n ) | | J C ( F q ) | = ∏ i = 1 2 g ( 1 − τ i n ) ∏ i = 1 2 g ( 1 − τ i ) {\displaystyle |G|={\dfrac {|J_{C}(\mathbb {F} _{q^{n}})|}{|J_{C}(\mathbb {F} _{q})|}}={\dfrac {\prod _{i=1}^{2g}(1-\tau _{i}^{n})}{\prod _{i=1}^{2g}(1-\tau _{i})}}} The actual group used in cryptographic applications is a subgroup G0 of G of a large prime order l. This group may be G itself. There exist three different cases of cryptographical relevance for TZV: g = 1, n = 3 g = 1, n = 5 g = 2, n = 3 == Arithmetic == The arithmetic used in the TZV group G0 based on the arithmetic for the whole group J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} , But it is possible to use the Frobenius endomorphism σ to speed up the scalar multiplication. This can be archived if G0 is generated by D of order l then σ(D) = sD, for some integers s. For the given cases of TZV s can be computed as follows, where ai come from the characteristic polynomial of the Frobenius endomorphism : For g = 1, n = 3: s = q − 1 1 − a 1 mod ℓ {\displaystyle s={\dfrac {q-1}{1-a_{1}}}{\bmod {\ell }}} For g = 1, n = 5: s = q 2 − q − a 1 2 q + a 1 q + 1 q − 2 a 1 q + a 1 3 − a 1 2 + a 1 − 1 mod ℓ {\displaystyle s={\dfrac {q^{2}-q-a_{1}^{2}q+a_{1}q+1}{q-2a_{1}q+a_{1}^{3}-a_{1}^{2}+a_{1}-1}}{\bmod {\ell }}} For g = 2, n = 3: s = − q 2 − a 2 + a 1 a 1 q − a 2 + 1 mod ℓ {\displaystyle s=-{\dfrac {q^{2}-a_{2}+a_{1}}{a_{1}q-a_{2}+1}}{\bmod {\ell }}} Knowing this, it is possible to replace any scalar multiplication mD (|m| ≤ l/2) with: m 0 D + m 1 σ ( D ) + ⋯ + m n − 1 σ n − 1 ( D ) , where m i = O ( ℓ 1 / ( n − 1 ) ) = O ( q g ) {\displaystyle m_{0}D+m_{1}\sigma (D)+\cdots +m_{n-1}\sigma ^{n-1}(D),~~~~{\text{where }}m_{i}=O(\ell ^{1/(n-1)})=O(q^{g})} With this trick the multiple scalar product can be reduced to about 1/(n − 1)th of doublings necessary for calculating mD, if the implied constants are small enough. == Security == The security of cryptographic systems based on trace zero subvarieties according to the results of the papers comparable to the security of hyper-elliptic curves of low genus g' over F p ′ {\displaystyle \mathbb {F} _{p'}} , where p' ~ (n − 1)(g/g' ) for |G| ~128 bits. For the cases where n = 3, g = 2 and n = 5, g = 1 it is possible to reduce the security for at most 6 bits, where |G| ~ 2256, because one can not be sure that G is contained in a Jacobian of a curve of genus 6. The security of curves of genus 4 for similar fields are far less secure. == Cover attack on a trace zero crypto-system == The attack published in shows, that the DLP in trace zero groups of genus 2 over finite fields of characteristic diverse than 2 or 3 and a field extension of degree 3 can be transformed into a DLP in a class group of degree 0 with genus of at most 6 over the base field. In this new class group the DLP can be attacked with the index calculus methods. This leads to a reduction of the bit length 1/6th.

  Read more →
• 

  Voice user interface

  A voice user interface (VUI) enables spoken human interaction with computers, using speech recognition to understand spoken commands and answer questions, and typically text to speech to play a reply. A voice command device is a device controlled with a voice user interface. Voice user interfaces have been added to automobiles, home automation systems, computer operating systems, home appliances like washing machines and microwave ovens, and television remote controls. They are the primary way of interacting with virtual assistants on smartphones and smart speakers. Older automated attendants (which route phone calls to the correct extension) and interactive voice response systems (which conduct more complicated transactions over the phone) can respond to the pressing of keypad buttons via DTMF tones, but those with a full voice user interface allow callers to speak requests and responses without having to press any buttons. Newer voice command devices are speaker-independent, so they can respond to multiple voices, regardless of accent or dialectal influences. They are also capable of responding to several commands at once, separating vocal messages, and providing appropriate feedback, accurately imitating a natural conversation. == Overview == A VUI is the interface to any speech application. Only a short time ago, controlling a machine by simply talking to it was only possible in science fiction. Until recently, this area was considered to be artificial intelligence. However, advances in technologies like text-to-speech, speech-to-text, natural language processing, and cloud services contributed to the mass adoption of these types of interfaces. VUIs have become more commonplace, and people are taking advantage of the value that these hands-free, eyes-free interfaces provide in many situations. VUIs rely on the ability to process input reliably, inconsistent performance often leads to decreased user engagement and negative feedback. Designing a good VUI requires interdisciplinary talents of computer science, linguistics and human factors such as psychology. Even with advanced development tools, constructing an effective VUI requires understanding of both the tasks to be performed, as well as the target audience that will use the final system. The closer the VUI matches the user's mental model of the task, the easier it will be to use with little or no training, resulting in both higher efficiency and higher user satisfaction. A VUI designed for the general public should emphasize ease of use and provide a lot of help and guidance for first-time callers. In contrast, a VUI designed for a small group of power users (including field service workers), should focus more on productivity and less on help and guidance. Such applications should streamline the call flows, minimize prompts, eliminate unnecessary iterations and allow elaborate "mixed initiative dialogs", which enable callers to enter several pieces of information in a single utterance and in any order or combination. In short, speech applications have to be carefully crafted for the specific business process that is being automated. Not all business processes render themselves equally well for speech automation. In general, the more complex the inquiries and transactions are, the more challenging they will be to automate, and the more likely they will be to fail with the general public. In some scenarios, automation is simply not applicable, so live agent assistance is the only option. A legal advice hotline, for example, would be very difficult to automate. On the flip side, speech is perfect for handling quick and routine transactions, like changing the status of a work order, completing a time or expense entry, or transferring funds between accounts. == History == Early applications for VUI included voice-activated dialing of phones, either directly or through a (typically Bluetooth) headset or vehicle audio system. In 2007, a CNN business article reported that voice command was over a billion dollar industry and that companies like Google and Apple were trying to create speech recognition features. In the years since the article was published, the world has witnessed a variety of voice command devices. Additionally, Google has created a speech recognition engine called Pico TTS and Apple released Siri. Voice command devices are becoming more widely available, and innovative ways for using the human voice are always being created. For example, Business Week suggests that the future remote controller is going to be the human voice. Currently Xbox Live allows such features and Jobs hinted at such a feature on the new Apple TV. == Voice command software products on computing devices == Both Apple Mac and Windows PC provide built in speech recognition features for their latest operating systems. === Microsoft Windows === Two Microsoft operating systems, Windows 7 and Windows Vista, provide speech recognition capabilities. Microsoft integrated voice commands into their operating systems to provide a mechanism for people who want to limit their use of the mouse and keyboard, but still want to maintain or increase their overall productivity. ==== Windows Vista ==== With Windows Vista voice control, a user may dictate documents and emails in mainstream applications, start and switch between applications, control the operating system, format documents, save documents, edit files, efficiently correct errors, and fill out forms on the Web. The speech recognition software learns automatically every time a user uses it, and speech recognition is available in English (U.S.), English (U.K.), German (Germany), French (France), Spanish (Spain), Japanese, Chinese (Traditional), and Chinese (Simplified). In addition, the software comes with an interactive tutorial, which can be used to train both the user and the speech recognition engine. ==== Windows 7 ==== In addition to all the features provided in Windows Vista, Windows 7 provides a wizard for setting up the microphone and a tutorial on how to use the feature. ==== Mac OS X ==== All Mac OS X computers come pre-installed with the speech recognition software. The software is user-independent, and it allows for a user to, "navigate menus and enter keyboard shortcuts; speak checkbox names, radio button names, list items, and button names; and open, close, control, and switch among applications." However, the Apple website recommends a user buy a commercial product called Dictate. === Commercial products === If a user is not satisfied with the built in speech recognition software or a user does not have a built speech recognition software for their OS, then a user may experiment with a commercial product such as Braina Pro or DragonNaturallySpeaking for Windows PCs, and Dictate, the name of the same software for Mac OS. == Voice command mobile devices == Any mobile device running Android OS, Microsoft Windows Phone, iOS 9 or later, or Blackberry OS provides voice command capabilities. In addition to the built-in speech recognition software for each mobile phone's operating system, a user may download third party voice command applications from each operating system's application store: Apple App store, Google Play, Windows Phone Marketplace (initially Windows Marketplace for Mobile), or BlackBerry App World. === Android OS === Google has developed an open source operating system called Android, which allows a user to perform voice commands such as: send text messages, listen to music, get directions, call businesses, call contacts, send email, view a map, go to websites, write a note, and search Google. The speech recognition software is available for all devices since Android 2.2 "Froyo", but the settings must be set to English. Google allows for the user to change the language, and the user is prompted when he or she first uses the speech recognition feature if he or she would like their voice data to be attached to their Google account. If a user decides to opt into this service, it allows Google to train the software to the user's voice. Google introduced the Google Assistant with Android 7.0 "Nougat". It is much more advanced than the older version. Amazon.com has the Echo that uses Amazon's custom version of Android to provide a voice interface. === Microsoft Windows === Windows Phone is Microsoft's mobile device's operating system. On Windows Phone 7.5, the speech app is user independent and can be used to: call someone from your contact list, call any phone number, redial the last number, send a text message, call your voice mail, open an application, read appointments, query phone status, and search the web. In addition, speech can also be used during a phone call, and the following actions are possible during a phone call: press a number, turn the speaker phone on, or call someone, which puts the current call on hold. Windows 10 introduces Cortana, a voice control system that replaces the formerly used voice control on Windows

  Read more →
• 

  Myrinet

  Myrinet, ANSI/VITA 26-1998, is a high-speed local area networking system designed by the company Myricom to be used as an interconnect between multiple machines to form computer clusters. == Description == Myrinet was promoted as having lower protocol overhead than standards such as Ethernet, and therefore better throughput, less interference, and lower latency while using the host CPU. Although it can be used as a traditional networking system, Myrinet is often used directly by programs that "know" about it, thereby bypassing a call into the operating system. Earlier versions of Myrinet used a variety of media and connectors: Generation 2 used copper media with DC-37 (Myrinet-LAN, M2L- controllers and switches) or microribbon (Myrinet-SAN, M2M-) connectors. Generation 3 used copper media with HSSDC (Myrinet-Serial, M3S-) or microribbon (Myrinet-SAN, M3M-) connectors, or fiber with LC-connectors (Myrinet-Fiber, M3F-). The later versions of Myrinet physically consist of two fibre optic cables, upstream and downstream, connected to the host computers with a single connector. Machines are connected via low-overhead routers and switches, as opposed to connecting one machine directly to another. Myrinet includes a number of fault-tolerance features, mostly backed by the switches. These include flow control, error control, and "heartbeat" monitoring on every link. The "fourth-generation" Myrinet, called Myri-10G, supported a 10 Gbit/s data rate and can use 10 Gigabit Ethernet on PHY, the physical layer (cables, connectors, distances, signaling). Myri-10G started shipping at the end of 2005. Myrinet was approved in 1998 by the American National Standards Institute for use on the VMEbus as ANSI/VITA 26-1998. One of the earliest publications on Myrinet is a 1995 IEEE article. === Performance === Myrinet is a lightweight protocol with little overhead that allows it to operate with throughput close to the basic signaling speed of the physical layer. For supercomputing, the low latency of Myrinet is even more important than its throughput performance, since, according to Amdahl's law, a high-performance parallel system tends to be bottlenecked by its slowest sequential process, which in all but the most embarrassingly parallel supercomputer workloads is often the latency of message transmission across the network. === Deployment === According to Myricom, 141 (28.2%) of the June 2005 TOP500 supercomputers used Myrinet technology. In the November 2005 TOP500, the number of supercomputers using Myrinet was down to 101 computers, or 20.2%, in November 2006, 79 (15.8%), and by November 2007, 18 (3.6%), a long way behind gigabit Ethernet at 54% and InfiniBand at 24.2%. In the June 2014 TOP500 list, the number of supercomputers using Myrinet interconnect was 1 (0.2%). In November 2013, the assets of Myricom (including the Myrinet technology) were acquired by CSP Inc. In 2016, it was reported that Google had also offered to buy the company.

  Read more →
• 

  ESign (India)

  Aadhaar eSign is an online electronic signature service in India to facilitate an Aadhaar holder to digitally sign a document. The signature service is facilitated by authenticating the Aadhaar holder via the Aadhaar-based e-KYC (electronic Know Your Customer) service. To eSign a document, one has to have an Aadhaar card and a mobile number registered with Aadhaar. With these two things, an Indian citizen can sign a document remotely without being physically present. == Procedure == The notification issued by Government of India in this regard stipulates the following procedure for the e-authentication using Aadhaar e-KYC services. Authentication of an electronic record by e-authentication technique, which shall be done by the applicable use of e-authentication, hash function, and asymmetric cryptosystem techniques, leading to issuance of digital signature certificate by Certifying Authority, a trusted third party service by subscriber's key pair generation, storing of the key pairs on hardware security module and creation of digital signature provided that the trusted third party shall be offered by the certifying authority (the trusted third party shall send application form and certificate signing request to the Certifying Authority for issuing a digital signature certificate to the subscriber), issuance of digital signature certificate by Certifying Authority shall be based on e-authentication, particulars given in the prescribed format, digitally signed verified information from Aadhaar e-KYC services and electronic consent of digital signature certificate applicant, the manner and requirements for e-authentication shall be as issued by the Controller from time to time, the security procedure for creating the subscriber's key pair shall be in accordance with the e-authentication guidelines issued by the Controller, the standards referred to in rule 6 of the Information Technology (Certifying Authorities) Rules, 2000 shall be complied with, in so far as they relate to the certification function of public key of Digital Signature Certificate applicant, and the manner in which information is authenticated by means of digital signature shall comply with the standards specified in rule 6 of the Information Technology (Certifying Authorities) Rules, 2000 in so far as they relate to the creation, storage and transmission of Digital Signature. == eSign Service Providers == Organisations and individuals seeking to obtain the eSigning Service can utilize the services of various service providers. There are empanelled service providers with whom organisations can register as an Application Service Prover after submitting the requisite documents, getting UAT access, building the application around the service and going through an IT Audit by an CERT-IN empanelled auditor. However, the process of registering as an Application Service Provider is cumbersome, and requires huge investments of time, money and resources in complying with the regulations and building a suitable application. Most organisations prefer using services of plug-n-play gateway providers who take the responsibility of complying with the regulations, hence simplifying the process for the market.

  Read more →