AI Avatar Heygen

AI Avatar Heygen — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  PenTile matrix family

  PenTile matrix is a family of patented subpixel matrix schemes used in electronic device displays. PenTile is a trademark of Samsung. PenTile matrices are used in AMOLED and LCD displays. These subpixel layouts are specifically designed to operate with proprietary algorithms for subpixel rendering embedded in the display driver, allowing plug and play compatibility with conventional RGB (Red-Green-Blue) stripe panels. == Overview == "PenTile Matrix" (a neologism from penta-, meaning "five" in Greek and tile) describes the geometric layout of the prototypical subpixel arrangement developed in the early 1990s. The layout consists of a quincunx comprising two red subpixels, two green subpixels, and one central blue subpixel in each unit cell. It was inspired by biomimicry of the human retina, which has nearly equal numbers of L and M type cone cells, but significantly fewer S cones. As the S cones are primarily responsible for perceiving blue colors, which do not appreciably affect the perception of luminance, reducing the number of blue subpixels with respect to the red and green subpixels in a display does not reduce the image quality. However, the layout may cause color leakage image distortion, which can be reduced by filters. In some cases the layout causes reduced moiré and blockiness compared to conventional RGB layouts. The PenTile layout is specifically designed to work with and be dependent upon subpixel rendering that uses only one and a quarter subpixel per pixel, on average, to render an image. That is, that any given input pixel is mapped to either a red-centered logical pixel, or a green-centered logical pixel. === History === PenTile was invented by Candice H. Brown Elliott, for which she was awarded the Society for Information Display's Otto Schade Prize in 2014. The technology was licensed by the company Clairvoyante from 2000 until 2008, during which time several prototype PenTile displays were developed by a number of Asian liquid crystal display (LCD) manufacturers. In March 2008, Samsung Electronics acquired Clairvoyante's PenTile IP assets. Samsung then funded a new company, Nouvoyance, Inc. to continue development of the PenTile technology. == PenTile RGBG == PenTile RGBG layout used in AMOLED and plasma displays uses green pixels interleaved with alternating red and blue pixels. The human eye is most sensitive to green, especially for high resolution luminance information. The green subpixels are mapped to input pixels on a one-to-one basis. The red and blue subpixels are subsampled, reconstructing the chroma signal at a lower resolution. The luminance signal is processed using adaptive subpixel rendering filters to optimize reconstruction of high spatial frequencies from the input image, wherein the green subpixels provide the majority of the reconstruction. The red and blue subpixels are capable of reconstructing the horizontal and vertical spatial frequencies, but not the highest of the diagonal. Diagonal high spatial frequency information in the red and blue channels of the input image are transferred to the green subpixels for image reconstruction. Thus the RG-BG scheme creates a color display with one third fewer subpixels than a traditional RGB-RGB scheme but with the same measured luminance display resolution. This is similar to the Bayer filter commonly used in digital cameras. === Devices === As of 2021, "almost all" OLED screens in portable consumer devices use some form of Pentile subpixel layout. == PenTile RGBW == PenTile RGBW technology, used in LCD, adds an extra subpixel to the traditional red, green and blue subpixels that is a clear area without color filtering material and with the only purpose of letting backlight come through, hence W for white. This makes it possible to produce a brighter image compared to an RGB-matrix while using the same amount of power, or produce an equally bright image while using less power. The PenTile RGBW layout uses each red, green, blue and white subpixel to present high-resolution luminance information to the human eyes' red-sensing and green-sensing cone cells, while using the combined effect of all the color subpixels to present lower-resolution chroma (color) information to all three cone cell types. Combined, this optimizes the match of display technology to the biological mechanisms of human vision. The layout uses one third fewer subpixels for the same resolution as the RGB stripe (RGB-RGB) layout, in spite of having four color primaries instead of the conventional three, using subpixel rendering combined with metamer rendering. Metamer rendering optimizes the energy distribution between the white subpixel and the combined red, green, and blue subpixels: W <> RGB, to improve image sharpness. The display driver chip has an RGB to RGBW color vector space converter and gamut mapping algorithm, followed by metamer and subpixel rendering algorithms. In order to maintain saturated color quality, to avoid simultaneous contrast error between saturated colors and peak white brightness, while simultaneously reducing backlight power requirements, the display backlight brightness is under control of the PenTile driver engine. When the image is mostly desaturated colors, those near white or grey, the backlight brightness is significantly reduced, often to less than 50% peak, while the LCD levels are increased to compensate. When the image has very bright saturated colors, the backlight brightness is maintained at higher levels. The PenTile RGBW also has an optional high-brightness mode that doubles the brightness of the desaturated color image areas, such as black-and-white text, for improved outdoor viewability. === Devices === Motorola MC65 Motorola ES55 Motorola ES400 Motorola Atrix 4G Samsung Galaxy Note 10.1 2014 version Lenovo Yoga 2 Pro Lenovo Yoga 3 Pro HP ENVY TouchSmart 14-k022tx Sleekbook MSI GS60 Ghost Pro 4K Lenovo IdeaPad Y50 4K Asus ZenBook UX303LN 4K Asus ZenBook Pro UX501JW LG UH7500/6500/6100 LG ThinQ G7/G7+ Oculus Quest 1 == Controversy == An ongoing controversy regarding the definition or measurement of resolution of color subpixelated flat panel displays led many people to question the resolution claims of PenTile display products. Journalists have noted that in "just about every flat-panel TV in existence, each pixel is composed of one red, one green, and one blue subpixel (RGB), all of uniform size". In traditional flat-panel screens, the resolution is defined by the number of red, green, and blue subpixels, in groups of three, in an array in each axis. As a result, each pixel or group of subpixels can render any colour on the screen, regardless of neighbouring pixels. This is not the case with PenTile screens. The Video Electronics Standards Association (VESA) method of measuring and defining resolution in color displays is to measure the contrast of line pairs, requiring a minimum of 50% Michelson contrast for displays intended for rendering text. The developers of PenTile displays use this VESA criterion for contrast of line pairs to calculate the resolutions specified. In the RGBG layout the alternate red and blue subpixels are 'shared' or sub-sampled with neighboring pixels. Due to the one third lower subpixel density on PenTile displays the pixel structure may be more visible when compared to RGB stripe displays with the same pixel density. The loss of subpixels for a given resolution specification has led some journalists to describe the use of PenTile as "shady practice" and "sort of cheating". For a given size and resolution specification, the PenTile screen can appear grainy, pixelated, speckled, with blurred text on some saturated colors and backgrounds when compared to RGB stripe color. This effect is understood to be caused by the restriction of the number of subpixels that may participate in the image reconstruction when colors are highly saturated to primaries. In the RGBW case, this is caused as the W subpixel will not be available in order to maintain the saturated color. In the RGBG case, this effect will occur when the color boundary is primarily red or blue, as the fully populated (one green per pixel) sub-pixel cannot contribute. For all other cases, text and especially full color images are effectively reconstructed. == Advantages and disadvantages == The PenTile layout reduces the number of subpixels needed to create a specified resolution. Consequently it is possible to achieve an HD resolution on a PenTile AMOLED screen at lower cost than other technologies, and most reviewers note that "300 ppi" (as per VESA - not full pixels) resolution displays (such as Samsung Galaxy S III) make the PenTile effect less obvious than lower resolution PenTile displays (Droid Razr). The second advantage is lower power consumption: the HTC One S's use of a PenTile display makes it more energy efficient and thinner than equivalent LCD screens, giving it better battery life than the HTC One X's IPS LCD. A PenTile AMOLED screen is also

  Read more →
• 

  LPBoost

  Linear Programming Boosting (LPBoost) is a supervised classifier from the boosting family of classifiers. LPBoost maximizes a margin between training samples of different classes, and thus also belongs to the class of margin classifier algorithms. Consider a classification function f : X → { − 1 , 1 } , {\displaystyle f:{\mathcal {X}}\to \{-1,1\},} which classifies samples from a space X {\displaystyle {\mathcal {X}}} into one of two classes, labelled 1 and -1, respectively. LPBoost is an algorithm for learning such a classification function, given a set of training examples with known class labels. LPBoost is a machine learning technique especially suited for joint classification and feature selection in structured domains. == LPBoost overview == As in all boosting classifiers, the final classification function is of the form f ( x ) = ∑ j = 1 J α j h j ( x ) , {\displaystyle f({\boldsymbol {x}})=\sum _{j=1}^{J}\alpha _{j}h_{j}({\boldsymbol {x}}),} where α j {\displaystyle \alpha _{j}} are non-negative weightings for weak classifiers h j : X → { − 1 , 1 } {\displaystyle h_{j}:{\mathcal {X}}\to \{-1,1\}} . Each individual weak classifier h j {\displaystyle h_{j}} may be just a little bit better than random, but the resulting linear combination of many weak classifiers can perform very well. LPBoost constructs f {\displaystyle f} by starting with an empty set of weak classifiers. Iteratively, a single weak classifier to add to the set of considered weak classifiers is selected, added and all the weights α {\displaystyle {\boldsymbol {\alpha }}} for the current set of weak classifiers are adjusted. This is repeated until no weak classifiers to add remain. The property that all classifier weights are adjusted in each iteration is known as totally-corrective property. Early boosting methods, such as AdaBoost do not have this property and converge slower. == Linear program == More generally, let H = { h ( ⋅ ; ω ) | ω ∈ Ω } {\displaystyle {\mathcal {H}}=\{h(\cdot ;\omega )|\omega \in \Omega \}} be the possibly infinite set of weak classifiers, also termed hypotheses. One way to write down the problem LPBoost solves is as a linear program with infinitely many variables. The primal linear program of LPBoost, optimizing over the non-negative weight vector α {\displaystyle {\boldsymbol {\alpha }}} , the non-negative vector ξ {\displaystyle {\boldsymbol {\xi }}} of slack variables and the margin ρ {\displaystyle \rho } is the following. min α , ξ , ρ − ρ + D ∑ n = 1 ℓ ξ n sb.t. ∑ ω ∈ Ω y n α ω h ( x n ; ω ) + ξ n ≥ ρ , n = 1 , … , ℓ , ∑ ω ∈ Ω α ω = 1 , ξ n ≥ 0 , n = 1 , … , ℓ , α ω ≥ 0 , ω ∈ Ω , ρ ∈ R . {\displaystyle {\begin{array}{cl}{\underset {{\boldsymbol {\alpha }},{\boldsymbol {\xi }},\rho }{\min }}&-\rho +D\sum _{n=1}^{\ell }\xi _{n}\\{\textrm {sb.t.}}&\sum _{\omega \in \Omega }y_{n}\alpha _{\omega }h({\boldsymbol {x}}_{n};\omega )+\xi _{n}\geq \rho ,\qquad n=1,\dots ,\ell ,\\&\sum _{\omega \in \Omega }\alpha _{\omega }=1,\\&\xi _{n}\geq 0,\qquad n=1,\dots ,\ell ,\\&\alpha _{\omega }\geq 0,\qquad \omega \in \Omega ,\\&\rho \in {\mathbb {R} }.\end{array}}} Note the effects of slack variables ξ ≥ 0 {\displaystyle {\boldsymbol {\xi }}\geq 0} : their one-norm is penalized in the objective function by a constant factor D {\displaystyle D} , which—if small enough—always leads to a primal feasible linear program. Here we adopted the notation of a parameter space Ω {\displaystyle \Omega } , such that for a choice ω ∈ Ω {\displaystyle \omega \in \Omega } the weak classifier h ( ⋅ ; ω ) : X → { − 1 , 1 } {\displaystyle h(\cdot ;\omega ):{\mathcal {X}}\to \{-1,1\}} is uniquely defined. When the above linear program was first written down in early publications about boosting methods it was disregarded as intractable due to the large number of variables α {\displaystyle {\boldsymbol {\alpha }}} . Only later it was discovered that such linear programs can indeed be solved efficiently using the classic technique of column generation. === Column generation for LPBoost === In a linear program a column corresponds to a primal variable. Column generation is a technique to solve large linear programs. It typically works in a restricted problem, dealing only with a subset of variables. By generating primal variables iteratively and on-demand, eventually the original unrestricted problem with all variables is recovered. By cleverly choosing the columns to generate the problem can be solved such that while still guaranteeing the obtained solution to be optimal for the original full problem, only a small fraction of columns has to be created. ==== LPBoost dual problem ==== Columns in the primal linear program corresponds to rows in the dual linear program. The equivalent dual linear program of LPBoost is the following linear program. max λ , γ γ sb.t. ∑ n = 1 ℓ y n h ( x n ; ω ) λ n + γ ≤ 0 , ω ∈ Ω , 0 ≤ λ n ≤ D , n = 1 , … , ℓ , ∑ n = 1 ℓ λ n = 1 , γ ∈ R . {\displaystyle {\begin{array}{cl}{\underset {{\boldsymbol {\lambda }},\gamma }{\max }}&\gamma \\{\textrm {sb.t.}}&\sum _{n=1}^{\ell }y_{n}h({\boldsymbol {x}}_{n};\omega )\lambda _{n}+\gamma \leq 0,\qquad \omega \in \Omega ,\\&0\leq \lambda _{n}\leq D,\qquad n=1,\dots ,\ell ,\\&\sum _{n=1}^{\ell }\lambda _{n}=1,\\&\gamma \in \mathbb {R} .\end{array}}} For linear programs the optimal value of the primal and dual problem are equal. For the above primal and dual problems, the optimal value is equal to the negative 'soft margin'. The soft margin is the size of the margin separating positive from negative training instances minus positive slack variables that carry penalties for margin-violating samples. Thus, the soft margin may be positive although not all samples are linearly separated by the classification function. The latter is called the 'hard margin' or 'realized margin'. ==== Convergence criterion ==== Consider a subset of the satisfied constraints in the dual problem. For any finite subset we can solve the linear program and thus satisfy all constraints. If we could prove that of all the constraints which we did not add to the dual problem no single constraint is violated, we would have proven that solving our restricted problem is equivalent to solving the original problem. More formally, let γ ∗ {\displaystyle \gamma ^{}} be the optimal objective function value for any restricted instance. Then, we can formulate a search problem for the 'most violated constraint' in the original problem space, namely finding ω ∗ ∈ Ω {\displaystyle \omega ^{}\in \Omega } as ω ∗ = argmax ω ∈ Ω ∑ n = 1 ℓ y n h ( x n ; ω ) λ n . {\displaystyle \omega ^{}={\underset {\omega \in \Omega }{\textrm {argmax}}}\sum _{n=1}^{\ell }y_{n}h({\boldsymbol {x}}_{n};\omega )\lambda _{n}.} That is, we search the space H {\displaystyle {\mathcal {H}}} for a single decision stump h ( ⋅ ; ω ∗ ) {\displaystyle h(\cdot ;\omega ^{})} maximizing the left hand side of the dual constraint. If the constraint cannot be violated by any choice of decision stump, none of the corresponding constraint can be active in the original problem and the restricted problem is equivalent. ==== Penalization constant ==== D {\displaystyle D} The positive value of penalization constant D {\displaystyle D} has to be found using model selection techniques. However, if we choose D = 1 ℓ ν {\displaystyle D={\frac {1}{\ell \nu }}} , where ℓ {\displaystyle \ell } is the number of training samples and 0 < ν < 1 {\displaystyle 0<\nu <1} , then the new parameter ν {\displaystyle \nu } has the following properties. ν {\displaystyle \nu } is an upper bound on the fraction of training errors; that is, if k {\displaystyle k} denotes the number of misclassified training samples, then k ℓ ≤ ν {\displaystyle {\frac {k}{\ell }}\leq \nu } . ν {\displaystyle \nu } is a lower bound on the fraction of training samples outside or on the margin. == Algorithm == Input: Training set X = { x 1 , … , x ℓ } {\displaystyle X=\{{\boldsymbol {x}}_{1},\dots ,{\boldsymbol {x}}_{\ell }\}} , x i ∈ X {\displaystyle {\boldsymbol {x}}_{i}\in {\mathcal {X}}} Training labels Y = { y 1 , … , y ℓ } {\displaystyle Y=\{y_{1},\dots ,y_{\ell }\}} , y i ∈ { − 1 , 1 } {\displaystyle y_{i}\in \{-1,1\}} Convergence threshold θ ≥ 0 {\displaystyle \theta \geq 0} Output: Classification function f : X → { − 1 , 1 } {\displaystyle f:{\mathcal {X}}\to \{-1,1\}} Initialization Weights, uniform λ n ← 1 ℓ , n = 1 , … , ℓ {\displaystyle \lambda _{n}\leftarrow {\frac {1}{\ell }},\quad n=1,\dots ,\ell } Edge γ ← 0 {\displaystyle \gamma \leftarrow 0} Hypothesis count J ← 1 {\displaystyle J\leftarrow 1} Iterate h ^ ← argmax ω ∈ Ω ∑ n = 1 ℓ y n h ( x n ; ω ) λ n {\displaystyle {\hat {h}}\leftarrow {\underset {\omega \in \Omega }{\textrm {argmax}}}\sum _{n=1}^{\ell }y_{n}h({\boldsymbol {x}}_{n};\omega )\lambda _{n}} if ∑ n = 1 ℓ y n h ^ ( x n ) λ n + γ ≤ θ {\displaystyle \sum _{n=1}^{\ell }y_{n}{\hat {h}}({\boldsymbol {x}}_{n})\lambda _{n}+\gamma \leq \theta } then break h J ← h ^ {\displaystyle h_{J}\leftarrow {\hat {h}}} J

  Read more →
• 

  Types of artificial neural networks

  Types of neural networks (NN) include a family of techniques. The simplest types have static components, including number of units, number of layers, unit weights and topology. Dynamic NNs evolve via learning. Some types allow/require learning to be "supervised" by the operator, while others operate independently. Some types operate purely in hardware, while others are purely software and run on general purpose computers. The main types are: Transformers: these use attention to analyze every token in the input stream against every other token in the stream. That technique has enabled neural networks to reach the general public via chatbots, code generators and many other forms. Convolutional neural networks (CNN): a FNN that uses kernels and regularization to evade problems in prior generations of NNs. They are typically used to analyze visual and other two-dimensional data. Generative adversarial networks set networks (of varying structure) against each other, each trying to push the other(s) to produce better results such as winning a game or to deceive the opponent about the authenticity of an input. == Feedforward == In feedforward neural networks the information moves from the input to output directly in every layer. There can be hidden layers with or without cycles/loops to sequence inputs. Feedforward networks can be constructed with various types of units, such as binary McCulloch–Pitts neurons, the simplest of which is the perceptron. Continuous neurons, frequently with sigmoidal activation, are used in the context of backpropagation. == Group method of data handling == The Group Method of Data Handling (GMDH) features fully automatic structural and parametric model optimization. The node activation functions are Kolmogorov–Gabor polynomials that permit additions and multiplications. It uses a deep multilayer perceptron with eight layers. It is a supervised learning network that grows layer by layer, where each layer is trained by regression analysis. Useless items are detected using a validation set, and pruned through regularization. The size and depth of the resulting network depends on the task. == Autoencoder == An autoencoder, autoassociator or Diabolo network is similar to the multilayer perceptron (MLP) – with an input layer, an output layer and one or more hidden layers connecting them. However, the output layer has the same number of units as the input layer. Its purpose is to reconstruct its own inputs (instead of emitting a target value). Therefore, autoencoders are unsupervised learning models. An autoencoder is used for unsupervised learning of efficient codings, typically for the purpose of dimensionality reduction and for learning generative models of data. == Probabilistic == A probabilistic neural network (PNN) is a four-layer feedforward neural network. The layers are Input, hidden pattern, hidden summation, and output. In the PNN algorithm, the parent probability distribution function (PDF) of each class is approximated by a Parzen window and a non-parametric function. Then, using PDF of each class, the class probability of a new input is estimated and Bayes’ rule is employed to allocate it to the class with the highest posterior probability. It was derived from the Bayesian network and a statistical algorithm called Kernel Fisher discriminant analysis. It is used for classification and pattern recognition. == Time delay == A time delay neural network (TDNN) is a feedforward architecture for sequential data that recognizes features independent of sequence position. In order to achieve time-shift invariance, delays are added to the input so that multiple data points (points in time) are analyzed together. It usually forms part of a larger pattern recognition system. It has been implemented using a perceptron network whose connection weights were trained with back propagation (supervised learning). == Convolutional == A convolutional neural network (CNN, or ConvNet or shift invariant or space invariant) is a class of deep network, composed of one or more convolutional layers with fully connected layers (matching those in typical ANNs) on top. It uses tied weights and pooling layers. In particular, max-pooling. It is often structured via Fukushima's convolutional architecture. They are variations of multilayer perceptrons that use minimal preprocessing. This architecture allows CNNs to take advantage of the 2D structure of input data. Its unit connectivity pattern is inspired by the organization of the visual cortex. Units respond to stimuli in a restricted region of space known as the receptive field. Receptive fields partially overlap, over-covering the entire visual field. Unit response can be approximated mathematically by a convolution operation. CNNs are suitable for processing visual and other two-dimensional data. They have shown superior results in both image and speech applications. They can be trained with standard backpropagation. CNNs are easier to train than other regular, deep, feed-forward neural networks and have many fewer parameters to estimate. Capsule Neural Networks (CapsNet) add structures called capsules to a CNN and reuse output from several capsules to form more stable (with respect to various perturbations) representations. Examples of applications in computer vision include DeepDream and robot navigation. They have wide applications in image and video recognition, recommender systems and natural language processing. == Deep stacking network == A deep stacking network (DSN) (deep convex network) is based on a hierarchy of blocks of simplified neural network modules. It was introduced in 2011 by Deng and Yu. It formulates the learning as a convex optimization problem with a closed-form solution, emphasizing the mechanism's similarity to stacked generalization. Each DSN block is a simple module that is easy to train by itself in a supervised fashion without backpropagation for the entire blocks. Each block consists of a simplified multi-layer perceptron (MLP) with a single hidden layer. The hidden layer h has logistic sigmoidal units, and the output layer has linear units. Connections between these layers are represented by weight matrix U; input-to-hidden-layer connections have weight matrix W. Target vectors t form the columns of matrix T, and the input data vectors x form the columns of matrix X. The matrix of hidden units is H = σ ( W T X ) {\displaystyle {\boldsymbol {H}}=\sigma ({\boldsymbol {W}}^{T}{\boldsymbol {X}})} . Modules are trained in order, so lower-layer weights W are known at each stage. The function performs the element-wise logistic sigmoid operation. Each block estimates the same final label class y, and its estimate is concatenated with original input X to form the expanded input for the next block. Thus, the input to the first block contains the original data only, while downstream blocks' input adds the output of preceding blocks. Then learning the upper-layer weight matrix U given other weights in the network can be formulated as a convex optimization problem: min U T f = ‖ U T H − T ‖ F 2 , {\displaystyle \min _{U^{T}}f=\|{\boldsymbol {U}}^{T}{\boldsymbol {H}}-{\boldsymbol {T}}\|_{F}^{2},} which has a closed-form solution. Unlike other deep architectures, such as DBNs, the goal is not to discover the transformed feature representation. The structure of the hierarchy of this kind of architecture makes parallel learning straightforward, as a batch-mode optimization problem. In purely discriminative tasks, DSNs outperform conventional DBNs. === Tensor deep stacking networks === This architecture is a DSN extension. It offers two important improvements: it uses higher-order information from covariance statistics, and it transforms the non-convex problem of a lower-layer to a convex sub-problem of an upper-layer. TDSNs use covariance statistics in a bilinear mapping from each of two distinct sets of hidden units in the same layer to predictions, via a third-order tensor. While parallelization and scalability are not considered seriously in conventional DNNs, all learning for DSNs and TDSNs is done in batch mode, to allow parallelization. Parallelization allows scaling the design to larger (deeper) architectures and data sets. The basic architecture is suitable for diverse tasks such as classification and regression. == Physics-informed == Such a neural network is designed for the numerical solution of mathematical equations, such as differential, integral, delay, fractional and others. As input parameters, PINN accepts variables (spatial, temporal, and others), transmits them through the network block. At the output, it produces an approximate solution and substitutes it into the mathematical model, considering the initial and boundary conditions. If the solution does not satisfy the required accuracy, one uses the backpropagation and rectify the solution. Besides PINN, other architectures have been developed to produce surrogate models for scientific comput

  Read more →
• 

  Effective fitness

  In natural evolution and artificial evolution (e.g. artificial life and evolutionary computation) the fitness (or performance or objective measure) of a schema is rescaled to give its effective fitness which takes into account crossover and mutation. Effective fitness is used in Evolutionary Computation to understand population dynamics. While a biological fitness function only looks at reproductive success, an effective fitness function tries to encompass things that are needed to be fulfilled for survival on population level. In homogeneous populations, reproductive fitness and effective fitness are equal. When a population moves away from homogeneity a higher effective fitness is reached for the recessive genotype. This advantage will decrease while the population moves toward an equilibrium. The deviation from this equilibrium displays how close the population is to achieving a steady state. When this equilibrium is reached, the maximum effective fitness of the population is achieved. Problem solving with evolutionary computation is realized with a cost function. If cost functions are applied to swarm optimization they are called a fitness function. Strategies like reinforcement learning and NEAT neuroevolution are creating a fitness landscape which describes the reproductive success of cellular automata. The effective fitness function models the number of fit offspring and is used in calculations that include evolutionary processes, such as mutation and crossover, important on the population level. The effective fitness model is superior to its predecessor, the standard reproductive fitness model. It advances in the qualitatively and quantitatively understanding of evolutionary concepts like bloat, self-adaptation, and evolutionary robustness. While reproductive fitness only looks at pure selection, effective fitness describes the flow of a population and natural selection by taking genetic operators into account. A normal fitness function fits to a problem, while an effective fitness function is an assumption if the objective was reached. The difference is important for designing fitness functions with algorithms like novelty search in which the objective of the agents is unknown. In the case of bacteria effective fitness could include production of toxins and rate of mutation of different plasmids, which are mostly stochastically determined == Applications == When evolutionary equations of the studied population dynamics are available, one can algorithmically compute the effective fitness of a given population. Though the perfect effective fitness model is yet to be found, it is already known to be a good framework to the better understanding of the moving of the genotype-phenotype map, population dynamics, and the flow on fitness landscapes. Models using a combination of Darwinian fitness functions and effective functions are better at predicting population trends. Effective models could be used to determine therapeutic outcomes of disease treatment. Other models could determine effective protein engineering and works towards finding novel or heightened biochemistry.

  Read more →
• 

  Admissible heuristic

  In computer science, specifically in algorithms related to pathfinding, a heuristic function is said to be admissible if it never overestimates the cost of reaching the goal, i.e. the cost it estimates to reach the goal is not higher than the lowest possible cost from the current point in the path. In other words, it should act as a lower bound. It is related to the concept of consistent heuristics. While all consistent heuristics are admissible, not all admissible heuristics are consistent. == Search algorithms == An admissible heuristic is used to estimate the cost of reaching the goal state in an informed search algorithm. In order for a heuristic to be admissible to the search problem, the estimated cost must always be lower than or equal to the actual cost of reaching the goal state. The search algorithm uses the admissible heuristic to find an estimated optimal path to the goal state from the current node. For example, in A search the evaluation function (where n {\displaystyle n} is the current node) is: f ( n ) = g ( n ) + h ( n ) {\displaystyle f(n)=g(n)+h(n)} where f ( n ) {\displaystyle f(n)} = the evaluation function. g ( n ) {\displaystyle g(n)} = the cost from the start node to the current node h ( n ) {\displaystyle h(n)} = estimated cost from current node to goal. h ( n ) {\displaystyle h(n)} is calculated using the heuristic function. With a non-admissible heuristic, the A algorithm could overlook the optimal solution to a search problem due to an overestimation in f ( n ) {\displaystyle f(n)} . == Formulation == n {\displaystyle n} is a node h {\displaystyle h} is a heuristic h ( n ) {\displaystyle h(n)} is cost indicated by h {\displaystyle h} to reach a goal from n {\displaystyle n} h ∗ ( n ) {\displaystyle h^{}(n)} is the optimal cost to reach a goal from n {\displaystyle n} h ( n ) {\displaystyle h(n)} is admissible if, ∀ n {\displaystyle \forall n} h ( n ) ≤ h ∗ ( n ) {\displaystyle h(n)\leq h^{}(n)} == Construction == An admissible heuristic can be derived from a relaxed version of the problem, or by information from pattern databases that store exact solutions to subproblems of the problem, or by using inductive learning methods. == Examples == Two different examples of admissible heuristics apply to the fifteen puzzle problem: Hamming distance Manhattan distance The Hamming distance is the total number of misplaced tiles. It is clear that this heuristic is admissible since the total number of moves to order the tiles correctly is at least the number of misplaced tiles (each tile not in place must be moved at least once). The cost (number of moves) to the goal (an ordered puzzle) is at least the Hamming distance of the puzzle. The Manhattan distance of a puzzle is defined as: h ( n ) = ∑ all tiles d i s t a n c e ( tile, correct position ) {\displaystyle h(n)=\sum _{\text{all tiles}}{\mathit {distance}}({\text{tile, correct position}})} Consider the puzzle below in which the player wishes to move each tile such that the numbers are ordered. The Manhattan distance is an admissible heuristic in this case because every tile will have to be moved at least the number of spots in between itself and its correct position. The subscripts show the Manhattan distance for each tile. The total Manhattan distance for the shown puzzle is: h ( n ) = 3 + 1 + 0 + 1 + 2 + 3 + 3 + 4 + 3 + 2 + 4 + 4 + 4 + 1 + 1 = 36 {\displaystyle h(n)=3+1+0+1+2+3+3+4+3+2+4+4+4+1+1=36} == Optimality proof == If an admissible heuristic is used in an algorithm that, per iteration, progresses only the path of lowest evaluation (current cost + heuristic) of several candidate paths, terminates the moment its exploration reaches the goal and, crucially, closes all optimal paths before terminating (something that's possible with A search algorithm if special care isn't taken), then this algorithm can only terminate on an optimal path. To see why, consider the following proof by contradiction: Assume such an algorithm managed to terminate on a path T with a true cost Ttrue greater than the optimal path S with true cost Strue. This means that before terminating, the evaluated cost of T was less than or equal to the evaluated cost of S (or else S would have been picked). Denote these evaluated costs Teval and Seval respectively. The above can be summarized as follows, Strue < Ttrue Teval ≤ Seval If our heuristic is admissible it follows that at this penultimate step Teval = Ttrue because any increase on the true cost by the heuristic on T would be inadmissible and the heuristic cannot be negative. On the other hand, an admissible heuristic would require that Seval ≤ Strue which combined with the above inequalities gives us Teval < Ttrue and more specifically Teval ≠ Ttrue. As Teval and Ttrue cannot be both equal and unequal our assumption must have been false and so it must be impossible to terminate on a more costly than optimal path. As an example, let us say we have costs as follows:(the cost above/below a node is the heuristic, the cost at an edge is the actual cost) 0 10 0 100 0 START ---- O ----- GOAL | | 0| |100 | | O ------- O ------ O 100 1 100 1 100 So clearly we would start off visiting the top middle node, since the expected total cost, i.e. f ( n ) {\displaystyle f(n)} , is 10 + 0 = 10 {\displaystyle 10+0=10} . Then the goal would be a candidate, with f ( n ) {\displaystyle f(n)} equal to 10 + 100 + 0 = 110 {\displaystyle 10+100+0=110} . Then we would clearly pick the bottom nodes one after the other, followed by the updated goal, since they all have f ( n ) {\displaystyle f(n)} lower than the f ( n ) {\displaystyle f(n)} of the current goal, i.e. their f ( n ) {\displaystyle f(n)} is 100 , 101 , 102 , 102 {\displaystyle 100,101,102,102} . So even though the goal was a candidate, we could not pick it because there were still better paths out there. This way, an admissible heuristic can ensure optimality. However, note that although an admissible heuristic can guarantee final optimality, it is not necessarily efficient.

  Read more →
• 

  Principal component analysis

  Principal component analysis (PCA) is a linear dimensionality reduction technique with applications in exploratory data analysis, visualization and data preprocessing. The data are linearly transformed onto a new coordinate system such that the directions (principal components) capturing the largest variation in the data can be easily identified. The principal components of a collection of points in a real coordinate space are a sequence of p {\displaystyle p} unit vectors, where the i {\displaystyle i} -th vector is the direction of a line that best fits the data while being orthogonal to the first i − 1 {\displaystyle i-1} vectors. Here, a best-fitting line is defined as one that minimizes the average squared perpendicular distance from the points to the line. These directions (i.e., principal components) constitute an orthonormal basis in which different individual dimensions of the data are linearly uncorrelated. Many studies use the first two principal components in order to plot the data in two dimensions and to visually identify clusters of closely related data points. Principal component analysis has applications in many fields such as population genetics, microbiome studies, and atmospheric science. == Overview == When performing PCA, the first principal component of a set of p {\displaystyle p} variables is the derived variable formed as a linear combination of the original variables that explains the most variance. The second principal component explains the most variance in what is left once the effect of the first component is removed, and we may proceed through p {\displaystyle p} iterations until all the variance is explained. PCA is most commonly used when many of the variables are highly correlated with each other and it is desirable to reduce their number to an independent set. The first principal component can equivalently be defined as a direction that maximizes the variance of the projected data. The i {\displaystyle i} -th principal component can be taken as a direction orthogonal to the first i − 1 {\displaystyle i-1} principal components that maximizes the variance of the projected data. For either objective, it can be shown that the principal components are eigenvectors of the data's covariance matrix. Thus, the principal components are often computed by eigendecomposition of the data covariance matrix or singular value decomposition of the data matrix. PCA is the simplest of the true eigenvector-based multivariate analyses and is closely related to factor analysis. Factor analysis typically incorporates more domain-specific assumptions about the underlying structure and solves eigenvectors of a slightly different matrix. PCA is also related to canonical correlation analysis (CCA). CCA defines coordinate systems that optimally describe the cross-covariance between two datasets while PCA defines a new orthogonal coordinate system that optimally describes variance in a single dataset. Robust and L1-norm-based variants of standard PCA have also been proposed. == History == PCA was invented in 1901 by Karl Pearson, as an analogue of the principal axis theorem in mechanics; it was later independently developed and named by Harold Hotelling in the 1930s. Depending on the field of application, it is also named the discrete Karhunen–Loève transform (KLT) in signal processing, the Hotelling transform in multivariate quality control, proper orthogonal decomposition (POD) in mechanical engineering, singular value decomposition (SVD) of X (invented in the last quarter of the 19th century), eigenvalue decomposition (EVD) of XTX in linear algebra, factor analysis (for a discussion of the differences between PCA and factor analysis see Ch. 7 of Jolliffe's Principal Component Analysis), Eckart–Young theorem (Harman, 1960), or empirical orthogonal functions (EOF) in meteorological science (Lorenz, 1956), empirical eigenfunction decomposition (Sirovich, 1987), quasiharmonic modes (Brooks et al., 1988), spectral decomposition in noise and vibration, and empirical modal analysis in structural dynamics. == Intuition == PCA can be thought of as fitting a p-dimensional ellipsoid to the data, where each axis of the ellipsoid represents a principal component. If some axis of the ellipsoid is small, then the variance along that axis is also small. To find the axes of the ellipsoid, we must first center the values of each variable in the dataset on 0 by subtracting the mean of the variable's observed values from each of those values. These transformed values are used instead of the original observed values for each of the variables. Then, we compute the covariance matrix of the data and calculate the eigenvalues and corresponding eigenvectors of this covariance matrix. Then we must normalize each of the orthogonal eigenvectors to turn them into unit vectors. Once this is done, each of the mutually-orthogonal unit eigenvectors can be interpreted as an axis of the ellipsoid fitted to the data. This choice of basis will transform the covariance matrix into a diagonalized form, in which the diagonal elements represent the variance of each axis. The proportion of the variance that each eigenvector represents can be calculated by dividing the eigenvalue corresponding to that eigenvector by the sum of all eigenvalues. Biplots and scree plots (degree of explained variance) are used to interpret findings of the PCA. == Details == PCA is defined as an orthogonal linear transformation on a real inner product space that transforms the data to a new coordinate system such that the greatest variance by some scalar projection of the data comes to lie on the first coordinate (called the first principal component), the second greatest variance on the second coordinate, and so on. Consider an n × p {\displaystyle n\times p} data matrix, X, with column-wise zero empirical mean (the sample mean of each column has been shifted to zero), where each of the n rows represents a different repetition of the experiment, and each of the p columns gives a particular kind of feature (say, the results from a particular sensor). Mathematically, the transformation is defined by a set of size l {\displaystyle l} (where l {\displaystyle l} is usually selected to be strictly less than p {\displaystyle p} to reduce dimensionality) of p {\displaystyle p} -dimensional vectors of weights or coefficients w ( k ) = ( w 1 , … , w p ) ( k ) {\displaystyle \mathbf {w} _{(k)}=(w_{1},\dots ,w_{p})_{(k)}} that map each row vector x ( i ) = ( x 1 , … , x p ) ( i ) {\displaystyle \mathbf {x} _{(i)}=(x_{1},\dots ,x_{p})_{(i)}} of X to a new vector of principal component scores t ( i ) = ( t 1 , … , t l ) ( i ) {\displaystyle \mathbf {t} _{(i)}=(t_{1},\dots ,t_{l})_{(i)}} , given by t k ( i ) = x ( i ) ⋅ w ( k ) f o r i = 1 , … , n k = 1 , … , l {\displaystyle {t_{k}}_{(i)}=\mathbf {x} _{(i)}\cdot \mathbf {w} _{(k)}\qquad \mathrm {for} \qquad i=1,\dots ,n\qquad k=1,\dots ,l} in such a way that the individual variables t 1 , … , t l {\displaystyle t_{1},\dots ,t_{l}} of t considered over the data set successively inherit the maximum possible variance from X, with each coefficient vector w constrained to be a unit vector. The above may equivalently be written in matrix form as T = X W {\displaystyle \mathbf {T} =\mathbf {X} \mathbf {W} } where T i k = t k ( i ) {\displaystyle {\mathbf {T} }_{ik}={t_{k}}_{(i)}} , X i j = x j ( i ) {\displaystyle {\mathbf {X} }_{ij}={x_{j}}_{(i)}} , and W j k = w j ( k ) {\displaystyle {\mathbf {W} }_{jk}={w_{j}}_{(k)}} . === First component === In order to maximize variance, the first weight vector w(1) thus has to satisfy w ( 1 ) = arg ⁡ max ‖ w ‖ = 1 { ∑ i ( t 1 ) ( i ) 2 } = arg ⁡ max ‖ w ‖ = 1 { ∑ i ( x ( i ) ⋅ w ) 2 } {\displaystyle \mathbf {w} _{(1)}=\arg \max _{\Vert \mathbf {w} \Vert =1}\,\left\{\sum _{i}(t_{1})_{(i)}^{2}\right\}=\arg \max _{\Vert \mathbf {w} \Vert =1}\,\left\{\sum _{i}\left(\mathbf {x} _{(i)}\cdot \mathbf {w} \right)^{2}\right\}} Equivalently, writing this in matrix form gives w ( 1 ) = arg ⁡ max ‖ w ‖ = 1 { ‖ X w ‖ 2 } = arg ⁡ max ‖ w ‖ = 1 { w T X T X w } {\displaystyle \mathbf {w} _{(1)}=\arg \max _{\left\|\mathbf {w} \right\|=1}\left\{\left\|\mathbf {Xw} \right\|^{2}\right\}=\arg \max _{\left\|\mathbf {w} \right\|=1}\left\{\mathbf {w} ^{\mathsf {T}}\mathbf {X} ^{\mathsf {T}}\mathbf {Xw} \right\}} Since w(1) has been defined to be a unit vector, it equivalently also satisfies w ( 1 ) = arg ⁡ max { w T X T X w w T w } {\displaystyle \mathbf {w} _{(1)}=\arg \max \left\{{\frac {\mathbf {w} ^{\mathsf {T}}\mathbf {X} ^{\mathsf {T}}\mathbf {Xw} }{\mathbf {w} ^{\mathsf {T}}\mathbf {w} }}\right\}} The quantity to be maximised can be recognised as a Rayleigh quotient. A standard result for a positive semidefinite matrix such as XTX is that the quotient's maximum possible value is the largest eigenvalue of the matrix, which occurs when w is the corresponding eigenvector. With w(1) found, the first principal component of a data vector

  Read more →
• 

  Vladimir Batagelj

  Vladimir Batagelj (born June 14, 1948 in Idrija, Yugoslavia) is a Slovenian mathematician and an emeritus professor of mathematics at the University of Ljubljana. He is known for his work in discrete mathematics and combinatorial optimization, particularly analysis of social networks and other large networks (blockmodeling). == Education and career == Vladimir Batagelj completed his Ph.D. at the University of Ljubljana in 1986 under the direction of Tomaž Pisanski. He stayed at the University of Ljubljana as a professor until his retirement, where he was a professor of sociology and statistics, while also being a chair of the Department of Sociology of the Faculty of Social Sciences. As visiting professor, he was taught at the University of Pittsburgh (1990-91) and at the University of Konstanz (2002). He was also a member of editorial boards of two journals: Informatica and Journal of Social Structure. His work has been cited over 11000 times. His book Exploratory Social Network Analysis with Pajek on blockmodeling, coauthored with Wouter de Nooy and Andrej Mrvar, is Batagelj's most cited work and has over 3300 citations. The book was translated into Chinese and Japanese. The revised and expanded third edition has been published by Cambridge University Press. In 1975, 11 years before completing his PhD, Batagelj published a solo paper in Communications of the ACM. Batagelj authored more than 20 textbooks in Slovenian, covering topics like TeX, combinatorics and discrete mathematics. He has also written extensively in the Slovenian popular science journal Presek. Batagelj has advised 9 Ph.D. students. == Pajek == Batagelj is particularly known for his work on Pajek, a freely available software for analysis and visualization of large networks. He began work on Pajek in 1996 with Andrej Mrvar, who was then his PhD student. == Awards and honors == First prizes for contributions (with Andrej Mrvar) to Graph Drawing Contests in years: 1995, 1996, 1997, 1998, 1999, 2000 and 2005 / Graph Drawing Hall of Fame. In 2007 the book Generalized blockmodeling was awarded the Harrison White Outstanding Book Award by the Mathematical Sociology Section of American Sociological Association In 2007 he was awarded (together with Anuška Ferligoj) the Simmel Award by INSNA. In 2013, Vladimir Batagelj and Andrej Mrvar received the INSNA's William D. Richards Software award for their work on Pajek. == Selected bibliography == Vladimir Batagelj, Social Network Analysis, Large-Scale [1]. in R.A. Meyers, ed., Encyclopedia of Complexity and Systems Science, Springer 2009: 8245–8265. Vladimir Batagelj, Complex Networks, Visualization of [2]. in R.A. Meyers, ed., Encyclopedia of Complexity and Systems Science, Springer 2009: 1253–1268. Wouter de Nooy, Andrej Mrvar, Vladimir Batagelj, Mark Granovetter (Series Editor), Exploratory Social Network Analysis with Pajek (Structural Analysis in the Social Sciences), Cambridge University Press 2005 (ISBN 0-521-60262-9). ESNA in Japanese, TDU, 2010. Patrick Doreian, Vladimir Batagelj, Anuška Ferligoj, Mark Granovetter (Series Editor), Generalized Blockmodeling (Structural Analysis in the Social Sciences), Cambridge University Press 2004 (ISBN 0-521-84085-6)

  Read more →
• 

  Principal component analysis

  Principal component analysis (PCA) is a linear dimensionality reduction technique with applications in exploratory data analysis, visualization and data preprocessing. The data are linearly transformed onto a new coordinate system such that the directions (principal components) capturing the largest variation in the data can be easily identified. The principal components of a collection of points in a real coordinate space are a sequence of p {\displaystyle p} unit vectors, where the i {\displaystyle i} -th vector is the direction of a line that best fits the data while being orthogonal to the first i − 1 {\displaystyle i-1} vectors. Here, a best-fitting line is defined as one that minimizes the average squared perpendicular distance from the points to the line. These directions (i.e., principal components) constitute an orthonormal basis in which different individual dimensions of the data are linearly uncorrelated. Many studies use the first two principal components in order to plot the data in two dimensions and to visually identify clusters of closely related data points. Principal component analysis has applications in many fields such as population genetics, microbiome studies, and atmospheric science. == Overview == When performing PCA, the first principal component of a set of p {\displaystyle p} variables is the derived variable formed as a linear combination of the original variables that explains the most variance. The second principal component explains the most variance in what is left once the effect of the first component is removed, and we may proceed through p {\displaystyle p} iterations until all the variance is explained. PCA is most commonly used when many of the variables are highly correlated with each other and it is desirable to reduce their number to an independent set. The first principal component can equivalently be defined as a direction that maximizes the variance of the projected data. The i {\displaystyle i} -th principal component can be taken as a direction orthogonal to the first i − 1 {\displaystyle i-1} principal components that maximizes the variance of the projected data. For either objective, it can be shown that the principal components are eigenvectors of the data's covariance matrix. Thus, the principal components are often computed by eigendecomposition of the data covariance matrix or singular value decomposition of the data matrix. PCA is the simplest of the true eigenvector-based multivariate analyses and is closely related to factor analysis. Factor analysis typically incorporates more domain-specific assumptions about the underlying structure and solves eigenvectors of a slightly different matrix. PCA is also related to canonical correlation analysis (CCA). CCA defines coordinate systems that optimally describe the cross-covariance between two datasets while PCA defines a new orthogonal coordinate system that optimally describes variance in a single dataset. Robust and L1-norm-based variants of standard PCA have also been proposed. == History == PCA was invented in 1901 by Karl Pearson, as an analogue of the principal axis theorem in mechanics; it was later independently developed and named by Harold Hotelling in the 1930s. Depending on the field of application, it is also named the discrete Karhunen–Loève transform (KLT) in signal processing, the Hotelling transform in multivariate quality control, proper orthogonal decomposition (POD) in mechanical engineering, singular value decomposition (SVD) of X (invented in the last quarter of the 19th century), eigenvalue decomposition (EVD) of XTX in linear algebra, factor analysis (for a discussion of the differences between PCA and factor analysis see Ch. 7 of Jolliffe's Principal Component Analysis), Eckart–Young theorem (Harman, 1960), or empirical orthogonal functions (EOF) in meteorological science (Lorenz, 1956), empirical eigenfunction decomposition (Sirovich, 1987), quasiharmonic modes (Brooks et al., 1988), spectral decomposition in noise and vibration, and empirical modal analysis in structural dynamics. == Intuition == PCA can be thought of as fitting a p-dimensional ellipsoid to the data, where each axis of the ellipsoid represents a principal component. If some axis of the ellipsoid is small, then the variance along that axis is also small. To find the axes of the ellipsoid, we must first center the values of each variable in the dataset on 0 by subtracting the mean of the variable's observed values from each of those values. These transformed values are used instead of the original observed values for each of the variables. Then, we compute the covariance matrix of the data and calculate the eigenvalues and corresponding eigenvectors of this covariance matrix. Then we must normalize each of the orthogonal eigenvectors to turn them into unit vectors. Once this is done, each of the mutually-orthogonal unit eigenvectors can be interpreted as an axis of the ellipsoid fitted to the data. This choice of basis will transform the covariance matrix into a diagonalized form, in which the diagonal elements represent the variance of each axis. The proportion of the variance that each eigenvector represents can be calculated by dividing the eigenvalue corresponding to that eigenvector by the sum of all eigenvalues. Biplots and scree plots (degree of explained variance) are used to interpret findings of the PCA. == Details == PCA is defined as an orthogonal linear transformation on a real inner product space that transforms the data to a new coordinate system such that the greatest variance by some scalar projection of the data comes to lie on the first coordinate (called the first principal component), the second greatest variance on the second coordinate, and so on. Consider an n × p {\displaystyle n\times p} data matrix, X, with column-wise zero empirical mean (the sample mean of each column has been shifted to zero), where each of the n rows represents a different repetition of the experiment, and each of the p columns gives a particular kind of feature (say, the results from a particular sensor). Mathematically, the transformation is defined by a set of size l {\displaystyle l} (where l {\displaystyle l} is usually selected to be strictly less than p {\displaystyle p} to reduce dimensionality) of p {\displaystyle p} -dimensional vectors of weights or coefficients w ( k ) = ( w 1 , … , w p ) ( k ) {\displaystyle \mathbf {w} _{(k)}=(w_{1},\dots ,w_{p})_{(k)}} that map each row vector x ( i ) = ( x 1 , … , x p ) ( i ) {\displaystyle \mathbf {x} _{(i)}=(x_{1},\dots ,x_{p})_{(i)}} of X to a new vector of principal component scores t ( i ) = ( t 1 , … , t l ) ( i ) {\displaystyle \mathbf {t} _{(i)}=(t_{1},\dots ,t_{l})_{(i)}} , given by t k ( i ) = x ( i ) ⋅ w ( k ) f o r i = 1 , … , n k = 1 , … , l {\displaystyle {t_{k}}_{(i)}=\mathbf {x} _{(i)}\cdot \mathbf {w} _{(k)}\qquad \mathrm {for} \qquad i=1,\dots ,n\qquad k=1,\dots ,l} in such a way that the individual variables t 1 , … , t l {\displaystyle t_{1},\dots ,t_{l}} of t considered over the data set successively inherit the maximum possible variance from X, with each coefficient vector w constrained to be a unit vector. The above may equivalently be written in matrix form as T = X W {\displaystyle \mathbf {T} =\mathbf {X} \mathbf {W} } where T i k = t k ( i ) {\displaystyle {\mathbf {T} }_{ik}={t_{k}}_{(i)}} , X i j = x j ( i ) {\displaystyle {\mathbf {X} }_{ij}={x_{j}}_{(i)}} , and W j k = w j ( k ) {\displaystyle {\mathbf {W} }_{jk}={w_{j}}_{(k)}} . === First component === In order to maximize variance, the first weight vector w(1) thus has to satisfy w ( 1 ) = arg ⁡ max ‖ w ‖ = 1 { ∑ i ( t 1 ) ( i ) 2 } = arg ⁡ max ‖ w ‖ = 1 { ∑ i ( x ( i ) ⋅ w ) 2 } {\displaystyle \mathbf {w} _{(1)}=\arg \max _{\Vert \mathbf {w} \Vert =1}\,\left\{\sum _{i}(t_{1})_{(i)}^{2}\right\}=\arg \max _{\Vert \mathbf {w} \Vert =1}\,\left\{\sum _{i}\left(\mathbf {x} _{(i)}\cdot \mathbf {w} \right)^{2}\right\}} Equivalently, writing this in matrix form gives w ( 1 ) = arg ⁡ max ‖ w ‖ = 1 { ‖ X w ‖ 2 } = arg ⁡ max ‖ w ‖ = 1 { w T X T X w } {\displaystyle \mathbf {w} _{(1)}=\arg \max _{\left\|\mathbf {w} \right\|=1}\left\{\left\|\mathbf {Xw} \right\|^{2}\right\}=\arg \max _{\left\|\mathbf {w} \right\|=1}\left\{\mathbf {w} ^{\mathsf {T}}\mathbf {X} ^{\mathsf {T}}\mathbf {Xw} \right\}} Since w(1) has been defined to be a unit vector, it equivalently also satisfies w ( 1 ) = arg ⁡ max { w T X T X w w T w } {\displaystyle \mathbf {w} _{(1)}=\arg \max \left\{{\frac {\mathbf {w} ^{\mathsf {T}}\mathbf {X} ^{\mathsf {T}}\mathbf {Xw} }{\mathbf {w} ^{\mathsf {T}}\mathbf {w} }}\right\}} The quantity to be maximised can be recognised as a Rayleigh quotient. A standard result for a positive semidefinite matrix such as XTX is that the quotient's maximum possible value is the largest eigenvalue of the matrix, which occurs when w is the corresponding eigenvector. With w(1) found, the first principal component of a data vector

  Read more →
• 

  Insider threat

  An insider threat is a perceived threat to an organization that comes from people within the organization, such as employees, former employees, contractors or business associates, who have inside information concerning the organization's security practices, data and computer systems. The threat may involve fraud, the theft of confidential or commercially valuable information, the theft of intellectual property, or the sabotage of computer systems. == Overview == Insiders may have accounts giving them legitimate access to computer systems, with this access originally having been given to them to serve in the performance of their duties; these permissions could be abused to harm the organization. Insiders are often familiar with the organization's data and intellectual property as well as the methods that are in place to protect them. This makes it easier for the insider to circumvent any security controls of which they are aware. Physical proximity to data means that the insider does not need to hack into the organizational network through the outer perimeter by traversing firewalls; rather they are in the building already, often with direct access to the organization's internal network. Insider threats are harder to defend against than attacks from outsiders, since the insider already has legitimate access to the organization's information and assets. An insider may attempt to steal property or information for personal gain or to benefit another organization or country. The threat to the organization could also be through malicious software left running on its computer systems by former employees, a so-called logic bomb. == Research == Insider threat is an active area of research in academia and government. The CERT Coordination Center at Carnegie-Mellon University maintains the CERT Insider Threat Center, which includes a database of more than 850 cases of insider threats, including instances of fraud, theft and sabotage; the database is used for research and analysis. CERT's Insider Threat Team also maintains an informational blog to help organizations and businesses defend themselves against insider crime. The Threat Lab and Defense Personnel and Security Research Center (DOD PERSEREC) has also recently emerged as a national resource within the United States of America. The Threat Lab hosts an annual conference, the SBS Summit. They also maintain a website that contains resources from this conference. Complimenting these efforts, a companion podcast was created, Voices from the SBS Summit. In 2022, the Threat Lab created an interdisciplinary journal, Counter Insider Threat Research and Practice (CITRAP) which publishes research on insider threat detection. === Findings === In the 2022 Data Breach Investigations Report (DBIR), Verizon found that 82% of breaches involved the human element, noting that employees continue to play a leading role in cybersecurity incidents and breaches. According to the UK Information Commissioners Office, 90% of all breaches reported to them in 2019 were the result of mistakes made by end users. This was up from 61% and 87% over the previous two years. A 2018 whitepaper reported that 53% of companies surveyed had confirmed insider attacks against their organization in the previous 12 months, with 27% saying insider attacks have become more frequent. A report published in July 2012 on the insider threat in the U.S. financial sector gives some statistics on insider threat incidents: 80% of the malicious acts were committed at work during working hours; 81% of the perpetrators planned their actions beforehand; 33% of the perpetrators were described as "difficult" and 17% as being "disgruntled". The insider was identified in 74% of cases. Financial gain was a motive in 81% of cases, revenge in 23% of cases, and 27% of the people carrying out malicious acts were in financial difficulties at the time. The US Department of Defense Personnel Security Research Center published a report that describes approaches for detecting insider threats. Earlier it published ten case studies of insider attacks by information technology professionals. Cybersecurity experts believe that 38% of negligent insiders are victims of a phishing attack, whereby they receive an email that appears to come from a legitimate source such as a company. These emails normally contain malware in the form of hyperlinks. == Typologies and ontologies == Multiple classification systems and ontologies have been proposed to classify insider threats. Traditional models of insider threat identify three broad categories: Malicious insiders, which are people who take advantage of their access to inflict harm on an organization; Negligent insiders, which are people who make errors and disregard policies, which place their organizations at risk; and Infiltrators, who are external actors that obtain legitimate access credentials without authorization. == Criticisms == Insider threat research has been criticized. Critics have argued that insider threat is a poorly defined concept. Forensically investigating insider data theft is notoriously difficult, and requires novel techniques such as stochastic forensics. Data supporting insider threat is generally proprietary (i.e., encrypted data). Theoretical/conceptual models of insider threat are often based on loose interpretations of research in the behavioral and social sciences, using "deductive principles and intuitions of subject matter expert." Adopting sociotechnical approaches, researchers have also argued for the need to consider insider threat from the perspective of social systems. Jordan Schoenherr said that "surveillance requires an understanding of how sanctioning systems are framed, how employees will respond to surveillance, what workplace norms are deemed relevant, and what ‘deviance’ means, e.g., deviation for a justified organization norm or failure to conform to an organizational norm that conflicts with general social values." By treating all employees as potential insider threats, organizations might create conditions that lead to insider threats. == Sector-specific concerns == === Healthcare === The healthcare industry faces particularly acute insider threat risks due to the large number of workforce members who require access to sensitive patient records for legitimate clinical purposes. The U.S. Department of Health and Human Services has identified unauthorized access by insiders, including workforce snooping on patient records and theft of protected health information for identity fraud, as a persistent enforcement concern. The Health Insurance Portability and Accountability Act (HIPAA) Security Rule addresses insider threats through several administrative safeguards, including workforce security procedures requiring covered entities to implement policies for authorizing and supervising workforce members who work with electronic protected health information, as well as termination procedures to revoke access when employment ends (45 CFR 164.308(a)(3)). The rule also requires audit controls to record and examine information system activity (45 CFR 164.312(b)), enabling detection of unauthorized access by insiders. The December 2024 Notice of proposed rulemaking (NPRM) to overhaul the HIPAA Security Rule would strengthen insider threat defenses by mandating role-based access controls, requiring notification of relevant workforce members within 24 hours of any changes to access privileges, and requiring regular review of audit logs to detect anomalous access patterns.

  Read more →
• 

  Plate notation

  In Bayesian inference, plate notation is a method of representing variables that repeat in a graphical model. Instead of drawing each repeated variable individually, a plate or rectangle is used to group variables into a subgraph that repeat together, and a number is drawn on the plate to represent the number of repetitions of the subgraph in the plate. The assumptions are that the subgraph is duplicated that many times, the variables in the subgraph are indexed by the repetition number, and any links that cross a plate boundary are replicated once for each subgraph repetition. == Example == In this example, we consider Latent Dirichlet allocation, a Bayesian network that models how documents in a corpus are topically related. There are two variables not in any plate; α is the parameter of the uniform Dirichlet prior on the per-document topic distributions, and β is the parameter of the uniform Dirichlet prior on the per-topic word distribution. The outermost plate represents all the variables related to a specific document, including θ i {\displaystyle \theta _{i}} , the topic distribution for document i. The M in the corner of the plate indicates that the variables inside are repeated M times, once for each document. The inner plate represents the variables associated with each of the N i {\displaystyle N_{i}} words in document i: z i j {\displaystyle z_{ij}} is the topic distribution for the jth word in document i, and w i j {\displaystyle w_{ij}} is the actual word used. The N in the corner represents the repetition of the variables in the inner plate N j {\displaystyle N_{j}} times, once for each word in document i. The circle representing the individual words is shaded, indicating that each w i j {\displaystyle w_{ij}} is observable, and the other circles are empty, indicating that the other variables are latent variables. The directed edges between variables indicate dependencies between the variables: for example, each w i j {\displaystyle w_{ij}} depends on z i j {\displaystyle z_{ij}} and β. == Extensions == A number of extensions have been created by various authors to express more information than simply the conditional relationships. However, few of these have become standard. Perhaps the most commonly used extension is to use rectangles in place of circles to indicate non-random variables—either parameters to be computed, hyperparameters given a fixed value (or computed through empirical Bayes), or variables whose values are computed deterministically from a random variable. The diagram on the right shows a few more non-standard conventions used in some articles in Wikipedia (e.g. variational Bayes): Variables that are actually random vectors are indicated by putting the vector size in brackets in the middle of the node. Variables that are actually random matrices are similarly indicated by putting the matrix size in brackets in the middle of the node, with commas separating row size from column size. Categorical variables are indicated by placing their size (without a bracket) in the middle of the node. Categorical variables that act as "switches", and which pick one or more other random variables to condition on from a large set of such variables (e.g. mixture components), are indicated with a special type of arrow containing a squiggly line and ending in a T junction. Boldface is consistently used for vector or matrix nodes (but not categorical nodes). == Software implementation == Plate notation has been implemented in various TeX/LaTeX drawing packages, but also as part of graphical user interfaces to Bayesian statistics programs such as BUGS and BayesiaLab and PyMC.

  Read more →
• 

  Algorithmic learning theory

  Algorithmic learning theory is a mathematical framework for analyzing machine learning problems and algorithms. Synonyms include formal learning theory and algorithmic inductive inference. Algorithmic learning theory is different from statistical learning theory in that it does not make use of statistical assumptions and analysis. Both algorithmic and statistical learning theory are concerned with machine learning and can thus be viewed as branches of computational learning theory. == Distinguishing characteristics == Unlike statistical learning theory and most statistical theory in general, algorithmic learning theory does not assume that data are random samples, that is, that data points are independent of each other. This makes the theory suitable for domains where observations are (relatively) noise-free but not random, such as language learning and automated scientific discovery. The fundamental concept of algorithmic learning theory is learning in the limit: as the number of data points increases, a learning algorithm should converge to a correct hypothesis on every possible data sequence consistent with the problem space. This is a non-probabilistic version of statistical consistency, which also requires convergence to a correct model in the limit, but allows a learner to fail on data sequences with probability measure 0 . Algorithmic learning theory investigates the learning power of Turing machines. Other frameworks consider a much more restricted class of learning algorithms than Turing machines, for example, learners that compute hypotheses more quickly, for instance in polynomial time. An example of such a framework is probably approximately correct learning . == Learning in the limit == The concept was introduced in E. Mark Gold's seminal paper "Language identification in the limit". The objective of language identification is for a machine running one program to be capable of developing another program by which any given sentence can be tested to determine whether it is "grammatical" or "ungrammatical". The language being learned need not be English or any other natural language - in fact the definition of "grammatical" can be absolutely anything known to the tester. In Gold's learning model, the tester gives the learner an example sentence at each step, and the learner responds with a hypothesis, which is a suggested program to determine grammatical correctness. It is required of the tester that every possible sentence (grammatical or not) appears in the list eventually, but no particular order is required. It is required of the learner that at each step the hypothesis must be correct for all the sentences so far. A particular learner is said to be able to "learn a language in the limit" if there is a certain number of steps beyond which its hypothesis no longer changes. At this point it has indeed learned the language, because every possible sentence appears somewhere in the sequence of inputs (past or future), and the hypothesis is correct for all inputs (past or future), so the hypothesis is correct for every sentence. The learner is not required to be able to tell when it has reached a correct hypothesis, all that is required is that it be true. Gold showed that any language which is defined by a Turing machine program can be learned in the limit by another Turing-complete machine using enumeration. This is done by the learner testing all possible Turing machine programs in turn until one is found which is correct so far - this forms the hypothesis for the current step. Eventually, the correct program will be reached, after which the hypothesis will never change again (but note that the learner does not know that it won't need to change). Gold also showed that if the learner is given only positive examples (that is, only grammatical sentences appear in the input, not ungrammatical sentences), then the language can only be guaranteed to be learned in the limit if there are only a finite number of possible sentences in the language (this is possible if, for example, sentences are known to be of limited length). Language identification in the limit is a highly abstract model. It does not allow for limits of runtime or computer memory which can occur in practice, and the enumeration method may fail if there are errors in the input. However the framework is very powerful, because if these strict conditions are maintained, it allows the learning of any program known to be computable. This is because a Turing machine program can be written to mimic any program in any conventional programming language. See Church-Turing thesis. == Other identification criteria == Learning theorists have investigated other learning criteria, such as the following. Efficiency: minimizing the number of data points required before convergence to a correct hypothesis. Mind Changes: minimizing the number of hypothesis changes that occur before convergence. Mind change bounds are closely related to mistake bounds that are studied in statistical learning theory. Kevin Kelly has suggested that minimizing mind changes is closely related to choosing maximally simple hypotheses in the sense of Occam’s Razor. == Annual conference == Since 1990, there is an International Conference on Algorithmic Learning Theory (ALT), called Workshop in its first years (1990–1997). Between 1992 and 2016, proceedings were published in the LNCS series. Starting from 2017, they are published by the Proceedings of Machine Learning Research. The 34th conference will be held in Singapore in Feb 2023. The topics of the conference cover all of theoretical machine learning, including statistical and computational learning theory, online learning, active learning, reinforcement learning, and deep learning.

  Read more →
• 

  Cartesian genetic programming

  Cartesian genetic programming is a form of genetic programming that uses a graph representation to encode computer programs. It grew from a method of evolving digital circuits developed by Julian F. Miller and Peter Thomson in 1997. The term ‘Cartesian genetic programming’ first appeared in 1999 and was proposed as a general form of genetic programming in 2000. It is called ‘Cartesian’ because it represents a program using a two-dimensional grid of nodes. Miller's keynote explains how CGP works. He edited a book entitled Cartesian Genetic Programming, published in 2011 by Springer. The open source project dCGP implements a differentiable version of CGP developed at the European Space Agency by Dario Izzo, Francesco Biscani and Alessio Mereta able to approach symbolic regression tasks, to find solution to differential equations, find prime integrals of dynamical systems, represent variable topology artificial neural networks and more.

  Read more →
• 

  Tensor glyph

  In scientific visualization a tensor glyph is an object that can visualize all or most of the nine degrees of freedom, such as acceleration, twist, or shear – of a 3 × 3 {\displaystyle 3\times 3} matrix. It is used for tensor field visualization, where a data-matrix is available at every point in the grid. "Glyphs, or icons, depict multiple data values by mapping them onto the shape, size, orientation, and surface appearance of a base geometric primitive." Tensor glyphs are a particular case of multivariate data glyphs. There are certain types of glyphs that are commonly used: Ellipsoid Cuboid Cylindrical Superquadrics According to Thomas Schultz and Gordon Kindlmann, specific types of tensor fields "play a central role in scientific and biomedical studies as well as in image analysis and feature-extraction methods."

  Read more →
• 

  Random projection

  In mathematics and statistics, random projection is a technique used to reduce the dimensionality of a set of points which lie in Euclidean space. According to theoretical results, random projection preserves distances well, but empirical results are sparse. They have been applied to many natural language tasks under the name random indexing. == Dimensionality reduction == Dimensionality reduction, as the name suggests, is reducing the number of random variables using various mathematical methods from statistics and machine learning. Dimensionality reduction is often used to reduce the problem of managing and manipulating large data sets. Dimensionality reduction techniques generally use linear transformations in determining the intrinsic dimensionality of the manifold as well as extracting its principal directions. For this purpose there are various related techniques, including: principal component analysis, linear discriminant analysis, canonical correlation analysis, discrete cosine transform, random projection, etc. Random projection is a simple and computationally efficient way to reduce the dimensionality of data by trading a controlled amount of error for faster processing times and smaller model sizes. The dimensions and distribution of random projection matrices are controlled so as to approximately preserve the pairwise distances between any two samples of the dataset. == Method == The core idea behind random projection is given in the Johnson-Lindenstrauss lemma, which states that if points in a vector space are of sufficiently high dimension, then they may be projected into a suitable lower-dimensional space in a way which approximately preserves pairwise distances between the points with high probability. In random projection, the original d {\displaystyle d} -dimensional data is projected to a k {\displaystyle k} -dimensional subspace, by multiplying on the left by a random matrix R ∈ R k × d {\displaystyle R\in \mathbb {R} ^{k\times d}} . Using matrix notation: If X d × N {\displaystyle X_{d\times N}} is the original set of N d-dimensional observations, then X k × N R P = R k × d X d × N {\displaystyle X_{k\times N}^{RP}=R_{k\times d}X_{d\times N}} is the projection of the data onto a lower k-dimensional subspace. Random projection is computationally simple: form the random matrix "R" and project the d × N {\displaystyle d\times N} data matrix X onto K dimensions of order O ( d k N ) {\displaystyle O(dkN)} . If the data matrix X is sparse with about c nonzero entries per column, then the complexity of this operation is of order O ( c k N ) {\displaystyle O(ckN)} . === Orthogonal random projection === A unit vector can be orthogonally projected to a random subspace. Let u {\displaystyle u} be the original unit vector, and let v {\displaystyle v} be its projection. The norm-squared ‖ v ‖ 2 2 {\displaystyle \|v\|_{2}^{2}} has the same distribution as projecting a random point, uniformly sampled on the unit sphere, to its first k {\displaystyle k} coordinates. This is equivalent to sampling a random point in the multivariate gaussian distribution x ∼ N ( 0 , I d × d ) {\displaystyle x\sim {\mathcal {N}}(0,I_{d\times d})} , then normalizing it. Therefore, ‖ v ‖ 2 2 {\displaystyle \|v\|_{2}^{2}} has the same distribution as ∑ i = 1 k x i 2 ∑ i = 1 k x i 2 + ∑ i = k + 1 d x i 2 {\displaystyle {\frac {\sum _{i=1}^{k}x_{i}^{2}}{\sum _{i=1}^{k}x_{i}^{2}+\sum _{i=k+1}^{d}x_{i}^{2}}}} , which by the chi-squared construction of the Beta distribution, has distribution Beta ⁡ ( k / 2 , ( d − k ) / 2 ) {\displaystyle \operatorname {Beta} (k/2,(d-k)/2)} , with mean k / d {\displaystyle k/d} . We have a concentration inequality P r [ | ‖ v ‖ 2 − k d | ≥ ϵ k d ] ≤ 3 exp ⁡ ( − k ϵ 2 / 64 ) {\displaystyle Pr\left[\left|\|v\|_{2}-{\frac {k}{d}}\right|\geq \epsilon {\sqrt {\frac {k}{d}}}\right]\leq 3\exp \left(-k\epsilon ^{2}/64\right)} for any ϵ ∈ ( 0 , 1 ) {\displaystyle \epsilon \in (0,1)} . === Gaussian random projection === The random matrix R can be generated using a Gaussian distribution. The first row is a random unit vector uniformly chosen from S d − 1 {\displaystyle S^{d-1}} . The second row is a random unit vector from the space orthogonal to the first row, the third row is a random unit vector from the space orthogonal to the first two rows, and so on. In this way of choosing R, and the following properties are satisfied: Spherical symmetry: For any orthogonal matrix A ∈ O ( d ) {\displaystyle A\in O(d)} , RA and R have the same distribution. Orthogonality: The rows of R are orthogonal to each other. Normality: The rows of R are unit-length vectors. === More computationally efficient random projections === Achlioptas has shown that the random matrix can be sampled more efficiently. Either the full matrix can be sampled IID according to R i , j = 3 / k × { + 1 with probability 1 6 0 with probability 2 3 − 1 with probability 1 6 {\displaystyle R_{i,j}={\sqrt {3/k}}\times {\begin{cases}+1&{\text{with probability }}{\frac {1}{6}}\\0&{\text{with probability }}{\frac {2}{3}}\\-1&{\text{with probability }}{\frac {1}{6}}\end{cases}}} or the full matrix can be sampled IID according to R i , j = 1 / k × { + 1 with probability 1 2 − 1 with probability 1 2 {\displaystyle R_{i,j}={\sqrt {1/k}}\times {\begin{cases}+1&{\text{with probability }}{\frac {1}{2}}\\-1&{\text{with probability }}{\frac {1}{2}}\end{cases}}} Both are efficient for database applications because the computations can be performed using integer arithmetic. More related study is conducted in. It was later shown how to use integer arithmetic while making the distribution even sparser, having very few nonzeroes per column, in work on the Sparse JL Transform. This is advantageous since a sparse embedding matrix means being able to project the data to lower dimension even faster. === Random Projection with Quantization === Random projection can be further condensed by quantization (discretization), with 1-bit (sign random projection) or multi-bits. It is the building block of SimHash, RP tree, and other memory efficient estimation and learning methods. == Large quasiorthogonal bases == The Johnson-Lindenstrauss lemma states that large sets of vectors in a high-dimensional space can be linearly mapped in a space of much lower (but still high) dimension n with approximate preservation of distances. One of the explanations of this effect is the exponentially high quasiorthogonal dimension of n-dimensional Euclidean space. There are exponentially large (in dimension n) sets of almost orthogonal vectors (with small value of inner products) in n–dimensional Euclidean space. This observation is useful in indexing of high-dimensional data. Quasiorthogonality of large random sets is important for methods of random approximation in machine learning. In high dimensions, exponentially large numbers of randomly and independently chosen vectors from equidistribution on a sphere (and from many other distributions) are almost orthogonal with probability close to one. This implies that in order to represent an element of such a high-dimensional space by linear combinations of randomly and independently chosen vectors, it may often be necessary to generate samples of exponentially large length if we use bounded coefficients in linear combinations. On the other hand, if coefficients with arbitrarily large values are allowed, the number of randomly generated elements that are sufficient for approximation is even less than dimension of the data space. == Implementations == RandPro - An R package for random projection sklearn.random_projection - A module for random projection from the scikit-learn Python library Weka implementation [1]

  Read more →
• 

  Kubeflow

  Kubeflow is an open-source platform for machine learning and MLOps on Kubernetes introduced by Google. The different stages in a typical machine learning lifecycle are represented with different software components in Kubeflow, including model development (Kubeflow Notebooks), model training (Kubeflow Pipelines, Kubeflow Training Operator), model serving (KServe), and automated machine learning (Katib). Each component of Kubeflow can be deployed separately, and it is not a requirement to deploy every component. == History == The Kubeflow project was first announced at KubeCon + CloudNativeCon North America 2017 by Google engineers David Aronchick, Jeremy Lewi, and Vishnu Kannan to address a perceived lack of flexible options for building production-ready machine learning systems. The project has also stated it began as a way for Google to open-source how they ran TensorFlow internally. The first release of Kubeflow (Kubeflow 0.1) was announced at KubeCon + CloudNativeCon Europe 2018. Kubeflow 1.0 was released in March 2020 via a public blog post announcing that many Kubeflow components were graduating to a "stable status", indicating they were now ready for production usage. In October 2022, Google announced that the Kubeflow project had applied to join the Cloud Native Computing Foundation. In July 2023, the foundation voted to accept Kubeflow as an incubating stage project. == Components == === Kubeflow Notebooks for model development === Machine learning models are developed in the notebooks component called Kubeflow Notebooks. The component runs web-based development environments inside a Kubernetes cluster, with native support for Jupyter Notebook, Visual Studio Code, and RStudio. === Kubeflow Pipelines for model training === Once developed, models are trained in the Kubeflow Pipelines component. The component acts as a platform for building and deploying portable, scalable machine learning workflows based on Docker containers. Google Cloud Platform has adopted the Kubeflow Pipelines DSL within its Vertex AI Pipelines product. === Kubeflow Training Operator for model training === For certain machine learning models and libraries, the Kubeflow Training Operator component provides Kubernetes custom resources support. The component runs distributed or non-distributed TensorFlow, PyTorch, Apache MXNet, XGBoost, and MPI training jobs on Kubernetes. === KServe for model serving === The KServe component (previously named KFServing) provides Kubernetes custom resources for serving machine learning models on arbitrary frameworks including TensorFlow, XGBoost, scikit-learn, PyTorch, and ONNX. KServe was developed collaboratively by Google, IBM, Bloomberg, NVIDIA, and Seldon. Publicly disclosed adopters of KServe include Bloomberg, Gojek, the Wikimedia Foundation, and others. === Katib for automated machine learning === Lastly, Kubeflow includes a component for automated training and development of machine learning models, the Katib component. It is described as a Kubernetes-native project and features hyperparameter tuning, early stopping, and neural architecture search. == Release timeline ==

  Read more →