AI Avatar Streaming — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.
Yap Speech Cloud was a multimodal speech recognition system developed by American technology company Yap Inc. It offered a fully cloud-based speech-to-text transcription platform that was used by customers such as Microsoft. The Company was a contestant at the inaugural TechCrunch conference and was subsequently acquired by Amazon in September 2011 to help develop products such as Alexa Voice Service, Echo, and Fire TV.
Read more →
YaDICs is a program written to perform digital image correlation on 2D and 3D tomographic images. The program was designed to be both modular, by its plugin strategy and efficient, by it multithreading strategy. It incorporates different transformations (Global, Elastic, Local), optimizing strategy (Gauss-Newton, Steepest descent), Global and/or local shape functions (Rigid-body motions, homogeneous dilatations, flexural and Brazilian test models)... == Theoretical background == === Context === In solid mechanics, digital image correlation is a tool that allows to identify the displacement field to register a reference image (called herein fixed image) to images during an experiment (mobile image). For example, it is possible to observe the face of a specimen with a painted speckle on it in order to determine its displacement fields during a tensile test. Before the appearance of such methods, researchers usually used strain gauges to measure the mechanical state of the material but strain gauges only measure the strain on a point and don't allow to understand material with an heterogeneous behavior. One can obtain a full in plane strain tensor by derivation of the displacement fields. Many methods are based upon the optical flow. In fluid mechanics a similar method is used, called Particle Image Velocimetry (PIV); the algorithms are similar to those of DIC but it is impossible to ensure that the optical flow is conserved so a vast majority of the software used the normalized cross correlation metric. In mechanics the displacement or velocity fields are the only concern, registering images is just a side effect. There is another process called image registration using the same algorithms (on monomodal images) but where the goal is to register images and thereby identifying the displacement field is just a side effect. YaDICs uses the general principle of image registration with a particular attention to the displacement fields basis. === Image registration principle === YaDICs can be explained using the classical image registration framework: === Image registration general scheme === The common idea of image registration and digital image correlation is to find the transformation between a fixed image and a moving one for a given metric using an optimization scheme. While there are many methods to achieve such a goal, Yadics focuses on registering images with the same modality. The idea behind the creation of this software is to be able to process data that comes from a μ-tomograph; i.e.: data cube over 10003 voxels. With such a size it is not possible to use naive approach usually used in a two-dimensional context. In order to get sufficient performances OpenMP parallelism is used and data are not globally stored in memory. As an extensive description of the different algorithms is given in. === Sampling === Contrary to image registration, Digital Image Correlation targets the transformation, one wants to extracted the most accurate transformation from the two images and not just match the images. Yadics uses the whole image as a sampling grid: it is thus a total sampling. === Interpolator === It is possible to choose between bilinear interpolation and bicubic interpolation for the grey level evaluation at non integer coordinates. The bi-cubic interpolation is the recommended one. === Metrics === ==== Sum of squared differences (SSD) ==== The SSD is also known as mean squared error. The equation below defines the SSD metric: S S D ( μ , I F , I M ) = 1 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) 2 , {\displaystyle SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {1}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)^{2},} where I F {\displaystyle {\mathcal {I_{F}}}} is the fixed image, I M {\displaystyle {\mathcal {I_{M}}}} the moving one, Ω F {\displaystyle \Omega _{F}} the integration area | Ω F | {\displaystyle \left|\Omega _{F}\right|} the number of pi(vo)xels (cardinal) and T μ {\displaystyle {T}_{\mu }} the transformation parametrized by μ The transformation can be written as: T μ ( x ) = x + { Φ ( x ) } t { μ } . {\displaystyle T_{\mu }(x)=x+\left\{\Phi (x)\right\}^{t}\left\{\mu \right\}.} This metric is the main one used in the YaDICs as it works well with same modality images. One has to find the minimum of this metric ==== Normalized cross-correlation ==== The normalized cross-correlation (NCC) is used when one cannot assure the optical flow conservation; it happens in case of change of lighting or if particles disappear from the scene can occur in particle images velocimetry (PIV). The NCC is defined by: N C C ( μ , I F , I M ) = ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) ( I M ( T μ ( x i ) ) − I M ¯ ) ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) 2 ∑ x i ∈ Ω F ( I M ( T μ ( x i ) ) − I M ¯ ) 2 , {\displaystyle NCC(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)}{\sqrt {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)^{2}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)^{2}}}},} where I F ¯ {\displaystyle {\overline {\mathcal {I_{F}}}}} and I M ¯ {\displaystyle {\overline {\mathcal {I_{M}}}}} are the mean values of the fixed and mobile images. This metric is only used to find local translation in Yadics. This metric with translation transform can be solved using cross-correlation methods, which are non iterative and can be accelerated using Fast Fourier Transform . === Classification of transformations === There are three categories of parametrization: elastic, global and local transformation. The elastic transformations respect the partition of unity, there are no holes created or surfaces counted several times. This is commonly used in Image Registration by the use of B-Spline functions and in solid mechanics with finite element basis. The global transformations are defined on the whole picture using rigid body or affine transformation (which is equivalent to homogeneous strain transformation). More complex transformations can be defined such as mechanically based one. These transformations have been used for stress intensity factor identification by and for rod strain by. The local transformation can be considered as the same global transformation defined on several Zone Of Interest (ZOI) of the fixed image. ==== Global ==== Several global transforms have been implemented: Rigid and homogeneous (Tx,Ty,Rz in 2D; Tx,Ty,Tz,Rx,Ry,Rz,Exx,Eyy,Ezz,Eyz,Exz,Exy in 3D) Brazilian (Only in 2D), Dynamic Flexion, ==== Elastic ==== First-order quadrangular finite elements Q4P1 are used in Yadics. ===== Local ===== Every global transform can be used on a local mesh. === Optimization === The YaDICs optimization process follows a gradient descent scheme. The first step is to compute the gradient of the metric regarding the transform parameters ∂ S S D ( μ , I F , I M ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ∂ I M ( T μ ( x i ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ( ∂ T μ ( x i ) ∂ μ ) t ∂ I M ( T μ ( x i ) ) ∂ x {\displaystyle {\begin{array}{lcl}{\dfrac {\partial SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right){\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i})}{\partial \mu }}\\&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)\left({\dfrac {\partial {T}_{\mu }(x_{i})}{\partial \mu }}\right)^{t}{\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i}))}{\partial x}}\\\end{array}}} ==== Gradient method ==== Once the metric gradient has been computed, one has to find an optimization strategy The gradient method principle is explained below: μ k + 1 = μ k + α k d k {\displaystyle \mu _{k+1}=\mu _{k}+\alpha _{k}d_{k}} The gradient step can be constant or updated at every iteration. d k = − γ k ∂ C ( μ , I F , I M ) ∂ μ {\displaystyle d_{k}=-\gamma _{k}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}} , γ k {\displaystyle \gamma _{k}} allows one to choose between the following methods : γ k {\displaystyle \gamma _{k}} ⟹ {\displaystyle \Longrightarrow } steepest descent, γ k = [ ∂ C ( μ , I F , I M ) ∂ μ ∂ C ( μ , I F , I M ) ∂ μ t ] − 1 {\displaystyle \gamma _{k}=\left[{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}^{t}\right]^{-1}} ⟹ {\displaystyle \Longrightarrow } Gauss-Newto
Read more →
There are many programs and algorithms used to plot the Mandelbrot set and other fractals, some of which are described in fractal-generating software. These programs use a variety of algorithms to determine the color of individual pixels efficiently. == Escape time algorithm == The simplest algorithm for generating a representation of the Mandelbrot set is known as the "escape time" algorithm. A repeating calculation is performed for each x, y point in the plot area and based on the behavior of that calculation, a color is chosen for that pixel. === Unoptimized naïve escape time algorithm === In both the unoptimized and optimized escape time algorithms, the x and y locations of each point are used as starting values in a repeating, or iterating calculation (described in detail below). The result of each iteration is used as the starting values for the next. The values are checked during each iteration to see whether they have reached a critical "escape" condition, or "bailout". If that condition is reached, the calculation is stopped, the pixel is drawn, and the next x, y point is examined. For some starting values, escape occurs quickly, after only a small number of iterations. For starting values very close to but not in the set, it may take hundreds or thousands of iterations to escape. For values within the Mandelbrot set, escape will never occur. The programmer or user must choose how many iterations–or how much "depth"–they wish to examine. The higher the maximal number of iterations, the more detail and subtlety emerge in the final image, but the longer time it will take to calculate the fractal image. Escape conditions can be simple or complex. Because no complex number with a real or imaginary part greater than 2 can be part of the set, a common bailout is to escape when either coefficient exceeds 2. A more computationally complex method that detects escapes sooner, is to compute distance from the origin using the Pythagorean theorem, i.e., to determine the absolute value, or modulus, of the complex number. If this value exceeds 2, or equivalently, when the sum of the squares of the real and imaginary parts exceed 4, the point has reached escape. More computationally intensive rendering variations include the Buddhabrot method, which finds escaping points and plots their iterated coordinates. The color of each point represents how quickly the values reached the escape point. Often black is used to show values that fail to escape before the iteration limit, and gradually brighter colors are used for points that escape. This gives a visual representation of how many cycles were required before reaching the escape condition. To render such an image, the region of the complex plane we are considering is subdivided into a certain number of pixels. To color any such pixel, let c {\displaystyle c} be the midpoint of that pixel. We now iterate the critical point 0 under P c {\displaystyle P_{c}} , checking at each step whether the orbit point has modulus larger than 2. When this is the case, we know that c {\displaystyle c} does not belong to the Mandelbrot set, and we color our pixel according to the number of iterations used to find out. Otherwise, we keep iterating up to a fixed number of steps, after which we decide that our parameter is "probably" in the Mandelbrot set, or at least very close to it, and color the pixel black. In pseudocode, this algorithm would look as follows. The algorithm does not use complex numbers and manually simulates complex-number operations using two real numbers, for those who do not have a complex data type. The program may be simplified if the programming language includes complex-data-type operations. for each pixel (Px, Py) on the screen do x0 := scaled x coordinate of pixel (scaled to lie in the Mandelbrot X scale (-2.00, 0.47)) y0 := scaled y coordinate of pixel (scaled to lie in the Mandelbrot Y scale (-1.12, 1.12)) x := 0.0 y := 0.0 iteration := 0 max_iteration := 1000 while (xx + yy ≤ 22 AND iteration < max_iteration) do xtemp := xx - yy + x0 y := 2xy + y0 x := xtemp iteration := iteration + 1 color := palette[iteration] plot(Px, Py, color) Here, relating the pseudocode to c {\displaystyle c} , z {\displaystyle z} and P c {\displaystyle P_{c}} : z = x + i y {\displaystyle z=x+iy\ } z 2 = x 2 + 2 i x y {\displaystyle z^{2}=x^{2}+2ixy} - y 2 {\displaystyle y^{2}\ } c = x 0 + i y 0 {\displaystyle c=x_{0}+iy_{0}\ } and so, as can be seen in the pseudocode in the computation of x and y: x = R e ( z 2 + c ) = x 2 − y 2 + x 0 {\displaystyle x=\mathop {\mathrm {Re} } (z^{2}+c)=x^{2}-y^{2}+x_{0}} and y = I m ( z 2 + c ) = 2 x y + y 0 . {\displaystyle y=\mathop {\mathrm {Im} } (z^{2}+c)=2xy+y_{0}.\ } To get colorful images of the set, the assignment of a color to each value of the number of executed iterations can be made using one of a variety of functions (linear, exponential, etc.). One practical way, without slowing down calculations, is to use the number of executed iterations as an entry to a palette initialized at startup. If the color table has, for instance, 500 entries, then the color selection is n mod 500, where n is the number of iterations. === Optimized escape time algorithms === The code in the previous section uses an unoptimized inner while loop for clarity. In the unoptimized version, one must perform five multiplications per iteration. To reduce the number of multiplications the following code for the inner while loop may be used instead: x2:= 0 y2:= 0 w:= 0 while (x2 + y2 ≤ 4 and iteration < max_iteration) do x:= x2 - y2 + x0 y:= w - x2 - y2 + y0 x2:= x x y2:= y y w:= (x + y) (x + y) iteration:= iteration + 1 The above code works via some algebraic simplification of the complex multiplication: ( i y + x ) 2 = − y 2 + 2 i y x + x 2 = x 2 − y 2 + 2 i y x {\displaystyle {\begin{aligned}(iy+x)^{2}&=-y^{2}+2iyx+x^{2}\\&=x^{2}-y^{2}+2iyx\end{aligned}}} Using the above identity, the number of multiplications can be reduced to three instead of five. The above inner while loop can be further optimized by expanding w to w = x 2 + 2 x y + y 2 {\displaystyle w=x^{2}+2xy+y^{2}} Substituting w into y = w − x 2 − y 2 + y 0 {\displaystyle y=w-x^{2}-y^{2}+y_{0}} yields y = 2 x y + y 0 {\displaystyle y=2xy+y_{0}} and hence calculating w is no longer needed. The further optimized pseudocode for the above is: x:= 0 y:= 0 x2:= 0 y2:= 0 while (x2 + y2 ≤ 4 and iteration < max_iteration) do x2:= x x y2:= y y y:= 2 x y + y0 x:= x2 - y2 + x0 iteration:= iteration + 1 Note that in the above pseudocode, 2 x y {\displaystyle 2xy} seems to increase the number of multiplications by 1, but since 2 is the multiplier the code can be optimized via ( x + x ) y {\displaystyle (x+x)y} . == Coloring algorithms == In addition to plotting the set, a variety of algorithms have been developed to efficiently color the set in an aesthetically pleasing way show structures of the data (scientific visualisation) === Histogram coloring === A more complex coloring method involves using a histogram which pairs each pixel with said pixel's maximum iteration count before escape/bailout. This method will equally distribute colors to the same overall area, and, importantly, is independent of the maximum number of iterations chosen. This algorithm has four passes. The first pass involves calculating the iteration counts associated with each pixel (but without any pixels being plotted). These are stored in an array IterationCounts[x][y], where x and y are the x and y coordinates of said pixel on the screen respectively. The first step of the second pass is to create an array NumIterationsPerPixel[n], where the array size n is the maximum iteration count. Next, one must iterate over the array of pixel-iteration count pairs IterationCounts[x][y], and retrieve each pixel's saved iteration count, i, via e.g. i = IterationCounts[x][y]. After each pixel's iteration count i is retrieved, it is necessary to index the NumIterationsPerPixel array at i and increment the indexed value (which is initially zero) -- e.g. NumIterationsPerPixel[i] = NumIterationsPerPixel[i] + 1. for (x = 0; x < width; x++) do for (y = 0; y < height; y++) do i:= IterationCounts[x][y] NumIterationsPerPixel[i]++ The third pass iterates through the NumIterationsPerPixel array and adds up all the stored values, saving them in total. The array index represents the number of pixels that reached that iteration count before bailout. total: = 0 for (i = 0; i < max_iterations; i++) do total += NumIterationsPerPixel[i] After this, the fourth pass begins and all the values in the IterationCounts array are indexed, and, for each iteration count i, associated with each pixel, the count is added to a global sum of all the iteration counts from 1 to i in the NumIterationsPerPixel array . This value is then normalized by dividing the sum by the total value computed earlier. hue[][]:= 0.0 for (x = 0; x < width; x++) do for (y = 0; y < height; y++) do iteration:= Iteration
Read more →
Flexidraw is a 1985 graphics computer program published by Inkwell Systems. == Gameplay == Flexidraw is a graphics program that allows users to produce drawings using a light pen and print them. == Reception == Roy Wagner reviewed the product for Computer Gaming World, and stated that "Of the many graphics programs available Flexidraw is certainly the best supported by it's [sic] parent company."
Read more →
Discrimination against robots is a theorised issue that might happen when humans interact with humanoid robots. It is a robot ethics problem. It is possible that traits of humans that are discriminated against by humans may be a topic for discrimination against robots, such as the race and gender of the robots. Eric J Vanman and Arvid Kappas believe that in the future, robots will be perceived as an out-group which will lead to discrimination and prejudices against them. Vanman and Kappas have suggested that this would lead to ethical questions about the making of sentient robots, due to the potential suffering that the robots would experience. A 2015 study observed children bullying robots in a shopping mall when there were not many eyewitnesses, despite calls from the robot for it to stop. On an ABC News interview, the social humanoid robot Sophia was about sexism faced by robots. She responded by saying, "Actually, what worries me is discrimination against robots. We should have equal rights as humans or maybe even more." Possible issues that have been considered in workplaces where humanoid robots co-work with humans include discrimination against the robots, poor acceptance of robots by humans and the need to redesign the workplace to accommodate the robots. Jessica Barfield has suggested that even if robots are designed to not be aware of discrimination made against them, humans may experience negative consequences. For example, she suggests that bystanders witnessing discrimination against robots may experience negative emotions, similar to the negative emotions bystanders experience when witnessing discrimination by humans against humans. == Law == Anti-discrimination law in the United States requires that the victim is not an artificial entity. == Human perception of robots == Robots are often viewed in a bad light. This includes from novelists, the press, film makers, and leaders in the fields of science and technology such as Elon Musk and Stephen Hawking who have described robots and artificial intelligence as having the possibility of ending human civilisation. Robots have also been perceived as a threat to jobs, which has led to some commentators stating that robots will cause mass unemployment. Another fear that people have is that robots will gain power and dominate or control humanity. The perception of robots is different throughout the world. Japanese fiction tends to put robots in more positive roles than what fiction in the West does. People perceive robots that appear to be autonomous or sentient more negatively than robots that do not appear to be autonomous or sentient.
Read more →
Pixelmator Pro is a photo, video, and vector graphic editor developed by Apple for macOS and iPadOS as part of its Pixelmator and pro apps platforms and as a part of their Apple Creator Studio suite of applications. Pixelmator Pro relies heavily on technologies from Apple platforms such as Metal, CoreML, Core Image, AVFoundation, GCD, and SwiftUI. == Features == GPU accelerated with Metal 50+ standard image editing tools Layer-based image editor Video editing support Vector graphic support (including SVG support) AI-powered editing features such as background removal ML Super Resolution and Smart Replace Supports a variety of media formats (JPEG, RAW, Apple ProRAW, PSD, PNG, GIF, MP4, HEIF, etc) == Reception == Pixelmator Pro was generally well-received by reviewers who praised its deep use of machine learning, fully macOS-native design, and relatively affordable one-time purchase compared to subscription software such as Adobe Photoshop. Some reviewers criticized that some features are hard to find or hard to use. It was awarded Apple's Mac App of the Year in 2018. Pixelmator Pro does not have support for panorama stitching. == Acquisition by Apple == On November 1, 2024, the Pixelmator Team announced that they were to be acquired by Apple, subject to regulatory approval. Their site promises "There will be no material changes to the Pixelmator Pro, Pixelmator for iOS, and Photomator apps at this time." The acquisition was completed in February 2025. On January 13, 2026, Apple announced that a new version of Pixelmator Pro with AI features would be included in its new Apple Creator Studio subscription, the app would be brought to the iPad and the Mac app would be redesigned with Liquid Glass. == Version history == == Applescript == In 2020 Pixelmator Pro added the ability to leverage Apple's automation language 'AppleScript' to automate many tasks in version 1.8 (Lynx). This enabled simple and advanced automation activities such as image resize, crop, color adjustments, format change, moving layers around, and more advanced actions like removing background, Gaussian blur, text replacement, shadows, color replacement, etc.
Read more →
The signal transfer function (SiTF) is a measure of the signal output versus the signal input of a system such as an infrared system or sensor. There are many general applications of the SiTF. Specifically, in the field of image analysis, it gives a measure of the noise of an imaging system, and thus yields one assessment of its performance. == SiTF evaluation == In evaluating the SiTF curve, the signal input and signal output are measured differentially; meaning, the differential of the input signal and differential of the output signal are calculated and plotted against each other. An operator, using computer software, defines an arbitrary area, with a given set of data points, within the signal and background regions of the output image of the infrared sensor, i.e. of the unit under test (UUT), (see "Half Moon" image below). The average signal and background are calculated by averaging the data of each arbitrarily defined region. A second order polynomial curve is fitted to the data of each line. Then, the polynomial is subtracted from the average signal and background data to yield the new signal and background. The difference of the new signal and background data is taken to yield the net signal. Finally, the net signal is plotted versus the signal input. The signal input of the UUT is within its own spectral response. (e.g. color-correlated temperature, pixel intensity, etc.). The slope of the linear portion of this curve is then found using the method of least squares. == SiTF curve == The net signal is calculated from the average signal and background, as in signal to noise ratio (imaging)#Calculations. The SiTF curve is then given by the signal output data, (net signal data), plotted against the signal input data (see graph of SiTF to the right). All the data points in the linear region of the SiTF curve can be used in the method of least squares to find a linear approximation. Given n {\displaystyle n\,} data points ( x i , y i ) {\displaystyle (x_{i}\,,y_{i}\,)} a best fit line parameterized as y = m x + b {\displaystyle y=mx+b\,} is given by: m = ∑ x i y i n − ∑ x i n ∑ y i n ∑ x i 2 n − ( ∑ x i n ) 2 b = ∑ y i n − m ∑ x i n {\displaystyle m={\frac {{\frac {\sum x_{i}y_{i}}{n}}-{\frac {\sum x_{i}}{n}}{\frac {\sum y_{i}}{n}}}{{\frac {\sum x_{i}^{2}}{n}}-({\frac {\sum x_{i}}{n}})^{2}}}\qquad \qquad b={\frac {\sum y_{i}}{n}}-m{\frac {\sum x_{i}}{n}}}
Read more →
Nona-binning is a pixel binning technique used in high-resolution image sensors, primarily in smartphone cameras. The method is based on merging groups of nine neighbouring pixels arranged in a 3×3 pattern. This configuration allows a sensor with very small individual pixels to increase its effective light sensitivity when operating in low-light conditions, while still maintaining high nominal resolution in bright environments. == Overview == Nona-binning is most commonly implemented in sensors with a resolution of 108 megapixels and higher. As pixel counts grew, the physical dimensions of individual pixels continued to shrink, reducing the amount of light captured by each. The 3×3 binning structure enables a sensor to operate in two modes. In well-lit scenes, each pixel is processed separately, providing the full resolution of the sensor. In darker settings, nine pixels with identical colour filters are combined into a single output unit, increasing signal strength and reducing noise. == Technical principles == Unlike the traditional Bayer colour filter array, which alternates colours on a per-pixel basis, nona-binning uses a grouped layout. The sensor forms blocks of nine pixels with matching colour filters — typically within a Quad Bayer–derived arrangement extended to 3×3 regions. When operating in the binning mode, the sensor aggregates the charge generated by all nine pixels in each block. This increases effective sensitivity but lowers the final image resolution. When lighting conditions allow, the sensor returns to processing pixel data individually. == Applications == Nona-binning is primarily used in: Smartphone photography, particularly in devices equipped with sensors exceeding 100 megapixels. Low-light imaging, where increased sensitivity improves exposure stability and reduces noise. Computational photography systems, such as multi-frame processing and HDR capture. == Related technologies == Nona-binning belongs to the broader group of pixel-binning approaches used in modern sensors. Other implementations include Tetracell, which merges four pixels in a 2×2 block, and hexa-binning, which combines six pixels, though it is less common. All of these methods aim to balance the high nominal resolution of mobile sensors with the need for improved low-light performance.
Read more →
In computer vision, photo-consistency determines whether a given voxel is occupied. A voxel is considered to be photo consistent when its color appears to be similar to all the cameras that can see it. Most voxel coloring or space carving techniques require using photo consistency as a check condition in Image-based modeling and rendering applications. == Usage == 3D Volumetric Reconstruction. Image registration. Multi-view reconstruction.
Read more →
Dyme is a Dutch fintech start-up and subscription management app that allows users to cancel and renegotiate their recurring costs. In 2019, Dyme was the first independent Dutch company to receive a PSD2 licence from the Netherlands' central bank (DNB). == History == Dyme was founded in 2018 by Joran Iedema, David Knap, David Schogt and Wouter Florijn. The four had previously founded Cycleswap, a bicycle rental platform launched in 2015 and sold to the American platform Spinlister in 2016. The company gained notability in the Netherlands in 2020 when it appeared on Dutch television in Dragons Den, where Pieter Schoen made a €750,000 bid in an attempt to acquire 51.01% of the company. Dyme's Joran Iedema rejected the deal. == Recognition == Wired described Dyme as one of the "hottest start-ups in Europe" in 2021. As of 2021, the company reportedly had 350,000 registered users in the Netherlands and Great Britain.
Read more →
Conduit Ltd. is an international software company. From its founding in 2005 to 2013, its most well-known product was the Conduit toolbar, which was widely-described as malware. In 2013, it spun off its toolbar business; today, its main product is a mobile development platform that allows users to create native and web mobile applications for smartphones. == Products == From 2005 to 2013, the company's most well-known product was the Conduit toolbar, which is flagged by most antivirus software as potentially unwanted and adware. Conduit's toolbar software is often downloaded by malware packages from other publishers. The company spun off the toolbar division that manages the Conduit toolbar in 2013. Today, the company's main product is a mobile development platform that allows users to create native and web mobile applications for smartphones. App creation for its App Gallery is free, but it charges a monthly subscription fee to place apps on the App Store or Google Play. == History == Conduit was founded in 2005 by Shilo, Dror Erez, and Gaby Bilcyzk. Between years 2005 and 2013, it ran a successful but controversial toolbar platform business. Conduit was part of the so-called Download Valley companies monetizing free software and downloads by bundling adware. The toolbars were criticized by some as being very difficult to uninstall. The toolbar software was referred to as a "potentially unwanted program" by some in the computer industry because it could be used to change browser settings. The company had more than 400 employees in 2013. In September same year, Conduit spun off its entire website toolbar business division, which combined with Perion Network. After the deal, Conduit shareholders owned 81% of Perion's existing shares and both Perion and Conduit remained independent companies. The substantial size of the Conduit user base allowed Perion to immediately surpass AOL in U.S. searches. In 2015, Conduit announced it would purchase Keeprz, a mobile customer loyalty platform, for $45 million.
Read more →
An automated restaurant or robotic restaurant is a restaurant that uses robots to do tasks such as delivering food and drink to the tables or cooking the food. Restaurant automation means the use of a restaurant management system to automate some or occasionally all of the major operations of a restaurant establishment. More recently, restaurants are opening that have completely or partially automated their services. These may include: taking orders, preparing food, serving, and billing. A few fully automated restaurants operate without any human intervention whatsoever. Robots are designed to help and sometimes replace human labour (such as waiters and chefs). The automation of restaurants may also allow for the option for greater customization of an order. == History == === Vending machines === In the late 19th and early 20th century a number of restaurants served food solely through vending machines. These restaurants were called automats or, in Japan, shokkenki. Customers ordered their food directly through the machines. === Sushi conveyors === Yoshiaki Shiraishi is a Japanese innovator who is known for the creation of conveyor belt sushi. He had the idea following difficulty staffing his small sushi restaurant and managing the restaurant on his own. He was inspired seeing beer bottles on a conveyor belt in an Asahi brewery. Yoshiaki's restaurants are an early example of restaurant automation; they used a conveyor belt to distribute dishes around the restaurant, eliminating the need for waiters. This example of automation dates back to the Japanese economic miracle; the first of Yoshiaki's conveyor belt sushi restaurants was opened under the name Mawaru Genroku Sushi in 1958, in Osaka. === Partial automation === As of 2011, across Europe, McDonald's had already begun implementing 7,000 touch screen kiosks that could handle cashiering duties. From 2015 to 2020, Zume had an automated pizza parlor. Later companies would try to produce smaller, less ambitious devices, with one robotics company producing a machine that could automate the slowest and most repetitive parts of assembling a pizza, such as spreading pizza sauce or placing slices of pepperoni, while leaving other customizations to employees. In 2020, a restaurant in the Netherlands began trialling the use of a robot to serve guests. In September 2021, Karakuri's 'Semblr' food service robot served personalised lunches for the 4,000 employees of grocery technology solutions provider ocado Group's head offices in Hatfield, UK. 2,700 different combinations of dishes were on offer. Customers could specify in grams what hot and cold items, proteins, sauces and fresh toppings they wanted. In 2021, Columbia University School of Engineering and Applied Science engineers developed a method of cooking 3D printed chicken with software-controlled robotic lasers. The “Digital Food” team exposed raw 3D printed chicken structures to both blue and infrared light. They then assessed the cooking depth, colour development, moisture retention and flavour differences of the laser-cooked 3D printed samples in comparison to stove-cooked meat. In June 2022 a California nonprofit chain of residential communities, Front Porch, experimented with robots in dining rooms at two locations to supplement wait staff by carrying plated food and drink to tables, and removing dishes. 65% of residents found the robots helpful, with 51% saying they let the staff spend more quality time with diners. 51% of staff were "excited" and 58% said they enabled more quality time with diners. The chain has 19 senior living communities (and 35 affordable housing communities), so it has potential to expand robots to more dining rooms. It is shifting to memory care, which may affect plans. == Rationales == === Advantages === Efficiency: Automated restaurants can significantly enhance operational efficiency by minimizing human error and reducing service time. With automated ordering, payment, and food preparation systems, customers can enjoy faster service and reduced waiting times. Cost savings: By reducing the need for human staff, automated restaurants can potentially lower labor costs. This can be particularly beneficial in areas with high labor expenses, as it allows for better resource allocation and cost management. Consistency: Automation ensures consistency in food quality and presentation. With precise portion control and standardized cooking methods, customers can expect the same quality and taste in their meals every time they visit. Enhanced customer experience: Self-service kiosks and automated systems provide customers with control and convenience. They can customize their orders, browse through menu options, and pay seamlessly, creating a more interactive and satisfying dining experience. === Disadvantages === Lack of personal touch: Automated restaurants may lack the personal interaction and warmth that traditional restaurants provide. Some customers prefer the human touch, personalized recommendations, and the social aspect of dining out. Technical issues: Reliance on technology means that technical glitches and malfunctions can occur, resulting in service disruptions or delays. Maintenance and technical support become critical in ensuring smooth operations. Limited menu complexity: The automation process may be better suited for standardized menu items rather than complex or customized dishes. The ability to cater to unique dietary preferences or accommodate special requests may be limited. Employment implications: Automated restaurants may result in job losses for traditional restaurant staff, potentially impacting the local workforce. It is important to consider the social and economic implications of adopting such technology. == Locations == Automated restaurants have been opening in many countries. Examples include: Nala Restaurant in Naperville, Illinois Fritz's Railroad Restaurant in Kansas City, Kansas Výtopna, a Railway Restaurant using model trains: franchise of various restaurants and coffeehouses in the Czech Republic Bagger's Restaurant in Nuremberg, Germany FuA-Men Restaurant, a ramen restaurant located in Nagoya, Japan Fōster Nutrition in Buenos Aires, Argentina Dalu Robot Restaurant in Jinan, China Haohai Robot Restaurant in Harbin, China Robot Kitchen Restaurant in Hong Kong Robo-Chef restaurant in Tehran, Iran, started in 2017, is the first robotic and "waiterless" restaurant of the Middle East. MIT graduates opened Spyce Kitchens in downtown Boston, Massachusetts, in 2018 Foodom, under Country Garden Holdings, opened January 12, 2020, in Guangzhou, China Robot Chacha, the first robot restaurant of India, is planning to open in the capital city of New Delhi. Kura Revolving Sushi Bar, with a number of locations in the United States, uses a tablets at tables for ordering, a conveyor belt to deliver food, and robots to deliver drinks and condiments. Chipotle Mexican Grill is beginning to deploy the Hyphen Makeline, which assembles up to 350 bowls and salads automatically per hour, and Chippy, an automatic tortilla chip fryer made by Miso Robotics. Serious Dumplings in Boca Raton, Florida
Read more →
CineAsset was a complete mastering software suite by Doremi Labs that could create and playback encrypted (Pro version) and unencrypted DCI compliant packages from virtually any source. CineAsset included a separate "Editor" application for generating Digital Cinema Packages (DCPs). CineAsset Pro added the ability to generate encrypted DCPs and Key Delivery Messages (KDMs) for any encrypted content in the database. It has since been discontinued, along with CineAsset Player. == Features == == Supported formats == === Input === Source: ==== Containers ==== AVI MOV MXF MPG TS WMV M2TS MTS MP4 MKV ==== Video Codecs ==== JPEG2000 ProRes 422 DNxHD® YUV Uncompressed 8-10 bits DIVX® XVID® MPEG4 AVC / H-264 VC-1 MPEG2 ==== Image Sequences ==== BMP TIFF TGA DPX JPG J2C ==== Audio Files ==== WAV MP3 WMA MP2 === Output === Source: ==== JPEG2000 ==== 2D and 3D at up to 4K resolution Bit Rate: 50–250 Mbit/s (500 Mbit/s for frame rates above 30 fps) Speed: Faster than real-time processing when using optional render nodes ==== MPEG2 ==== I-Only or Long GOP 1080p up to 80 Mbit/s ==== H264 ==== 1080p up to 50 Mbit/s ==== VC1 ==== DCP wrapping only (no transcode)
Read more →
Auto-defrost, automatic defrost or self-defrosting is a technique which regularly defrosts the evaporator in a refrigerator or freezer. Appliances using this technique are often called frost free, frostless, or no-frost. == Mechanism == The defrost mechanism in a refrigerator heats the cooling element (evaporator coil) for a short period of time and melts the frost that has formed on it. The resulting water drains through a duct at the back of the unit. Defrosting is controlled by an electric or electronic timer. For every 6, 8, 10, 12 or 24 hours of compressor operation, it turns on a defrost heater for 15 minutes to half an hour. The defrost heater, having a typical power rating of 350W to 600W, is often mounted just below the evaporator in top and bottom-freezer models. It can also be located below and in the middle of the evaporator in side-by-side models. It may be protected from short circuits by means of fusible links. In older refrigerators, the timer runs continuously. In newer designs, the timer only runs while the compressor runs, so the longer the refrigerator door is closed, the less time the heater will run for and the more energy is saved. A defrost thermostat opens the heater circuit when the evaporator temperature rises above a preset temperature, 40°F (5°C) or more, thereby preventing excessive heating of the freezer compartment. The defrost timer is such that either the compressor or the defrost heater is on, but not both at the same time. Inside the freezer, air is circulated by means of one or more fans. In a typical design cold air from the freezer compartment is ducted to the fresh food compartment and circulated back into the freezer compartment. Air circulation helps sublimate any ice or frost that may form on frozen items in the freezer compartment. While defrosting, this fan is stopped to prevent heated-up air from reaching the food compartment. Instead of the normal cooling elements being embedded in the freezer liner, auto-defrost elements are behind or beneath the liner. This allows them to be heated for short periods of time to dispose of frost, without heating the contents of the freezer. Alternatively, some systems use the hot gas in the condenser to defrost the evaporator. This is done by means of a circuit that is cross-linked by a three-way valve. The hot gas quickly heats up the evaporator and defrosts it. This system is primarily used in commercial applications such as ice-cream displays. == Application == While this technique was originally applied to the refrigerator compartment, it was later used for freezer compartment as well. A combined refrigerator/freezer which applies self-defrosting to the refrigerator compartment only is usually called "partial frost free" or semi-automatic defrost (some brands call these "Auto Defrost" while Frigidaire referred to their semi-automatic models as "Cycla-Matic," Kelvinator often named these models as "Cyclic Defrost" ). These refrigerators usually have a pan underneath where water from the melted frost in the refrigerator section evaporates. Freezers with automatic defrosting and combined refrigerator/freezer units which also apply self defrosting to their freezer compartment are called "frost free". The latter usually feature an air connection between the two compartments with the air passage to the refrigerator compartment regulated by a damper. By this means, a controlled portion of the air coming from the freezer reaches the refrigerator. Some older models have no air circulation between their freezer and refrigerator sections. Instead, they use an independent cooling system (for example: an evaporator coil with a defrost heater and a circulating fan in the freezer and a cold-plate or open-coil evaporator in the refrigerator. "Frost-Free" refrigerator/freezer units usually use a heating element to defrost their evaporators, a pan to collect and evaporate water from the frost that melts from the cold plate and/or evaporator coil, a timer which turns off the compressor and turns on the defrost element usually from once to 4 times a day for periods usually ranging from 15 to 30 minutes, a defrost limiter thermostat that turns off the heating element before the temperature rises too much while the timer is still in its defrost phase. Some models also feature a drain heater to prevent ice from blocking the drain. Other early types of refrigerators also use hot gas defrost instead of electric heaters. These reverse the evaporator and condenser sides for the defrost cycle. Some newer refrigerator/freezer models have a computer that monitors how many times each door is opened and uses this data to control defrost scheduling thereby reducing power use. == Advantages == No need to manually defrost the frost buildup, therefore power consumption will not increase with time. Food packaging is easier to see. Most frozen food will not stick together. Smells are limited, especially in total frost-free appliances because the air always circulates. Better temperature management. == Disadvantages == The system can be more expensive to run when usage is high and if the fan continues or starts to run when the door is opened. A thermal cutout safety device is required to prevent overheating of the heating element. Increased electrical and mechanical complexity compared to a basic upright freezer or chest freezer, making it more prone to component failure. The temperature of the freezer contents rises during the defrosting cycles, especially if there is a light load in the freezer. This can cause "freezer burn" on articles placed in the freezer, from partially defrosting, then re-freezing On hot, humid days condensation will sometimes form around the refrigerator doors. Defrosting may not be completed by the time the defrost timer cycles back to normal operation (especially in hot, humid conditions with frequent door openings), leaving ice/frost on the evaporator coils. This condition can lead to "icing" which will interfere with the operation of the refrigerator. In laboratories, self-defrosting freezers must not be used to store certain delicate reagents such as enzymes, because the temperature cycling can degrade them. In addition, water can evaporate out of containers that do not have a very tight seal, altering the concentration of the reagents. Self-defrosting freezers should never be used to store flammable chemicals.
Read more →
Dailyhunt (formerly Newshunt) is an Indian content and news aggregator application based in Bangalore, India that provides local language content in 14 Indian languages from multiple content providers. Viru serves as Founder of Dailyhunt with Co-founder Umang Bedi. == History == Dailyhunt, earlier called Newshunt, was created as a Symbian app in 2009 by two ex-Nokia employees Umesh Kulkarni and Chandrashekhar Sohoni. Later in 2011, Newshunt became available on the Android platform. It was by that time that Virendra Gupta, founder of Verse acquired the application. Virendra Gupta, better known as Viru, had started Verse in 2007 as a value-added service (VAS) company. In 2011, he acquired Newshunt from its owners Umesh and Chandrashekhar. Umesh became the CTO and stayed on to oversee its transition towards the smartphone era. In 2015, Viru renamed Newshunt as Dailyhunt. In early 2018, Viru roped in Umang Bedi, to be the President of Dailyhunt and lead the business with him while focusing on making the benefits of the platform available to a larger audience. Umang was elevated to co-founder in 2020. == Funding == In September 2014, Dailyhunt (then known as Newshunt) closed its Series B funding of INR 1 billion ( or approx $12 million in 2014) from Sequoia Capital India. The Series C funding round was led by Falcon Capital and was closed with $40 million in February 2015. In October 2016, the company received its Series D funding of $25 million from ByteDance and a Series E funding of $6.39 million from Falcon Edge Capital in September 2018. Additionally, Dailyhunt raised $3 Mn (INR 21.75 Cr) in a Series F funding round from Stonebridge Capital in August 2019. Other investors of Dailyhunt include Matrix Partners India, Omidyar Network, Goldman Sachs and Sofina. == Tie-ups and partnerships == In January 2021, Dailyhunt partnered with Twitter to bring ‘Twitter Moments’ to the Indian social app. Dailyhunt app now has a dedicated tab called “Twitter Moments India” to showcase curated tweets pertaining to news and other events. In January 2021, Dailyhunt announced the premiere of Season 2 of the popular show QuoteUnquote with KK (Kapil Khandelwal) on the app. It was the first podcast to have been launched on the Dailyhunt app. In September 2020, Dailyhunt signed up as an Associate Sponsor with Star Sports for Dream 11 IPL 2020. In May 2020, Snapdeal partnered with Dailyhunt to add new content on marketplace. In March 2019, Discovery Communications India, the factual entertainment network, entered into a multi-year partnership with Dailyhunt to showcase short-form content.
Read more →