AI Avatar Streaming

AI Avatar Streaming — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Arattai

Arattai Messenger (or simply Arattai) is an encrypted messaging service for instant messaging, voice calls, and video calls, developed by Zoho Corporation. The name Arattai means "chat" or "conversation" in Tamil. The app was soft-launched in January 2021. The app saw a sharp surge in downloads in September 2025, partially fueled by endorsements from Indian government officials. However, the app dropped from the top rankings in October 2025. == History == Arattai was initially tested internally among Zoho employees before being released publicly in early 2021. The launch coincided with a surge in interest for privacy-focused and messaging services, triggered by concerns over WhatsApp's updated terms of service. In September 2025, Arattai experienced a major surge in adoption, with daily sign-ups reportedly increasing 100-fold, from around 3,000 to more than 350,000 in three days. The surge in downloads was attributed to Zoho products being promoted by Indian government officials as part of their Make in India push for homegrown alternatives to foreign‐owned apps, amid deteriorating India–US relations. The growth temporarily strained Zoho's infrastructure, prompting rapid scaling of servers and capacity expansion. During the same period, the app reached the top position in Apple's App Store charts for the "Social Networking" category in India. The app dropped from the top ranking in late October 2025. == Reception == At launch, Arattai was positioned as a potential domestic rival to WhatsApp in India, but analysts noted that it faced challenges with encryption, ecosystem, and network effect. Critics pointed to occasional sync delays.
Read more →
Conversion path

A conversion path is a description of the steps taken by a user of a website towards a desired end from the standpoint of the website operator or marketer. The typical conversion path begins with a user arriving at a landing page or a product page and proceeding through a series of page transitions until reaching a final state, either positive (e.g. purchase) or negative (e.g. abandoned session). In practice, the study of the dynamics of this process by the interested party has evolved into a sophisticated field, where various statistical methods are being applied to the optimization of outcomes. This includes real-time adjustment of presented content, in which a website operator tries to provide deliberate incentives to increase the odds of conversion based on various sources of information, including demographic traits, search history, and browsing events. In practice, this reflects in different content presented to users arriving from online advertising versus search engines, and similarly, different content is presented depending on their demographic segments. The fundamental metric describing this process in the aggregate is known as conversion rate.
Read more →
Zero-overhead looping

In computer architecture, zero-overhead looping is a hardware feature found in some processors that enables loops to execute without the performance cost of traditional loop control instructions. Instead of software managing loop iterations, the processor's hardware handles repetition automatically, saving clock cycles and improving efficiency. This technique is commonly employed in digital signal processors (DSPs) and certain complex instruction set computer (CISC) architectures. == Background == In many instruction sets, a loop must be implemented by using instructions to increment or decrement a counter, check whether the end of the loop has been reached, and if not jump to the beginning of the loop so it can be repeated. Although this typically only represents around 3–16 bytes of space for each loop, even that small amount could be significant depending on the size of the CPU caches. More significant is that those instructions each take time to execute, time which is not spent doing useful work. The overhead of such a loop is apparent compared to a completely unrolled loop, in which the body of the loop is duplicated exactly as many times as it will execute. In that case, no space or execution time is wasted on instructions to repeat the body of the loop. However, the duplication caused by loop unrolling can significantly increase code size, and the larger size can even impact execution time due to cache misses. (For this reason, it's common to only partially unroll loops, such as transforming it into a loop which performs the work of four iterations in one step before repeating. This balances the advantages of unrolling with the overhead of repeating the loop.) Moreover, completely unrolling a loop is only possible for a limited number of loops: those whose number of iterations is known at compile time. For example, the following C code could be compiled and optimized into the following x86 assembly code: == Implementation == Processors with zero-overhead looping have machine instructions and registers to automatically repeat one or more instructions. Depending on the instructions available, these may only be suitable for count-controlled loops ("for loops") in which the number of iterations can be calculated in advance, or only for condition-controlled loops ("while loops") such as operations on null-terminated strings. === Examples === ==== PIC ==== In the PIC instruction set, the REPEAT and DO instructions implement zero-overhead loops. REPEAT only repeats a single instruction, while DO repeats a specified number of following instructions. ==== Blackfin ==== Blackfin offers two zero-overhead loops. The loops can be nested; if both hardware loops are configured with the same "loop end" address, loop 1 will behave as the inner loop and repeat, and loop 0 will behave as the outer loop and repeat only if loop 1 would not repeat. Loops are controlled using the LTx and LBx registers (x either 0 to 1) to set the top and bottom of the loop — that is, the first and last instructions to be executed, which can be the same for a loop with only one instruction — and LCx for the loop count. The loop repeats if LCx is nonzero at the end of the loop, in which case LCx is decremented. The loop registers can be set manually, but this would typically consume 6 bytes to load the registers, and 8–16 bytes to set up the values to be loaded. More common is to use the loop setup instruction (represented in assembly as either LOOP with pseudo-instruction LOOP_BEGIN and LOOP_END, or in a single line as LSETUP), which optionally initializes LCx and sets LTx and LBx to the desired values. This only requires 4–6 bytes, but can only set LTx and LBx within a limited range relative to where the loop setup instruction is located. ==== x86 ==== The x86 assembly language REP prefixes implement zero-overhead loops for a few instructions (namely MOVS/STOS/CMPS/LODS/SCAS). Depending on the prefix and the instruction, the instruction will be repeated a number of times with (E)CX holding the repeat count, or until a match (or non-match) is found with AL/AX/EAX or with DS:[(E)SI]. This can be used to implement some types of searches and operations on null-terminated strings.
Read more →
Media Block

A Media Block or Integrated Media Block (IMB) is a component in a digital cinema projection system. Its purpose is to convert the Digital Cinema Package (DCP) content into data that ultimately produces picture and sound in a theater in compliance with DCI anti-piracy encryption requirements. == Terminology == DCI specification allows for two different security system architectures. In the first the Media Block is outside of the projector. This design is simply referred to as a "Media Block" and is typically a device attached directly to the motherboard of a Digital Cinema server. The media block is usually connected to the projector by dual-link SDI cables. Such media block is limited to processing 2K output, downscaling 4K DCPs if necessary. The second architecture describes an "Integrated Media Block". This refers to a device attached and integrated directly into the projector, which receives image data from the server, usually via a cat6 Ethernet connection. They can process 2K and 4K output. Some hardware implementations integrate the entire server on a single board and are able to work both as a MB as well as an IMB. == Security features == All security functions are contained within a Secure Processing Block (SPB), a tamper-proof physical device. Upon ingestion into a DCP server, Key Delivery Messages (KDM) are stored on flash memory in the media block or IMB. A KDM is written to enable the playback of a specific DCP during a specific time window and on a specific media block or IMB, identified by its serial number during the authoring process. Media blocks and IMBs also contain a secure clock that is set in the factory cannot be altered by the end user, which the DCP servers to which they are attached use to determine showtimes. The secure clock prevents theaters from showing encrypted movies outside the times authorized by the KDM (e.g. after it has expired) by simply changing the date and time in the server's BIOS. Media blocks and IMBs also typically include anti-tamper devices, designed to self-destruct the unit if unauthorized modification of its hardware, software or secure clock is attempted.
Read more →
Identi.ca

identi.ca is a free and open-source social networking and blogging service based on the pump.io software, using the Activity Streams protocol. Identi.ca stopped accepting new registrations in 2013, but continues to operate alongside several other pump.io-based hosts provided by E14N which continue to accept new registrations. == Features == Identi.ca is similar to social networking sites like Facebook and Google+, allowing unlimited length status updates, rich text, and images. The Activity Streams protocol supports many kinds of activities such as games. OpenFarmGame is a prototype application for an Activity Streams-based game. Previous features from its StatusNet version such as hashtags, groups, and global search are not supported. == History == === StatusNet === The service received more than 8,000 registrations and 19,000 updates within the first 24 hours of publicly launching on July 2, 2008, and reached its 1,000,000th notice on November 4, 2008. In January 2009, identi.ca received investment funds from venture capital group Montreal Start Up. On March 30, 2009, Control Yourself (since renamed StatusNet Inc) announced that Identi.ca was to become part of a hosted microblogging service called status.net to be launched in May 2009. Status.net offers individual microblogs under a subdomain to be chosen by the customer. Identi.ca will remain a free service. All notices will be published under the Creative Commons Attribution 3.0 license by default, but paying customers will be free to choose a different license. Formerly based on StatusNet, a micro-blogging software package built on the OStatus specification (and earlier based on the OpenMicroBlogging specification), Identi.ca allowed users to send text updates (known as "notices") up to 140 characters long. While similar to Twitter in both concept and operation, Identi.ca/StatusNet provided many features not currently implemented by Twitter, including XMPP support and personal tag clouds. In addition, Identi.ca/StatusNet allowed free export and exchange of personal and "friend" data based on the FOAF standard; therefore, notices could be fed into a Twitter account or other service, and also ported in to a private system similar to Yammer. === pump.io === Developer Evan Prodromou chose to change the site to the pump.io software platform in development, because pump.io offers more features making it technically more advanced. Registration on Identi.ca was closed in December 2012 in preparation for the switch to pump.io software (the popularity of Identi.ca and "official" Status.net hosting were considered a hindrance to the creation of a federated social network). The conversion was completed on 12 July 2013. The 140 character per post limit was removed (in StatusNet, it was a setting, not an inherent limitation); now the blog posts can contain formatting and images. Groups, hashtags, and a page listing popular posts are not yet implemented in pump.io.
Read more →
ISO/IEC JTC 1/SC 6

ISO/IEC JTC 1/SC 6 Telecommunications and information exchange between systems is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1. It is part of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of telecommunications and information exchange between systems. ISO/IEC JTC 1/SC 6 was established in 1964, following the creation of a Special Working Group under ISO/TC 97 on Data Link Control Procedures and Modem Interfaces. The international secretariat of ISO/IEC JTC 1/SC 6 is the Korean Agency for Technology and Standards (KATS), located in South Korea. == Scope == The scope of ISO/IEC JTC 1/SC 6 is “Standardization in the field of telecommunications dealing with the exchange of information between open systems including system functions, procedures, parameters as well as the conditions for their use. The standardization encompasses protocols and services of lower layers, including physical, data link, network, and transport as well as those of upper layers including but not limited to Directory and ASN.1.” Future Network has recently been added as an important work scope. A considerable part of the work is done in effective cooperation with ITU-T and other standardization bodies including IEEE 802 and Ecma International. == Structure == ISO/IEC JTC 1/SC 6 has three active working groups (WGs), each of which carries out specific tasks in standards development within the field of telecommunications and information exchange between systems. The focus of each working group is described in the group’s terms of reference. Working groups can be established if new working areas arise, or disbanded if the group’s working area is no longer relevant to standardization needs. Active working groups of ISO/IEC JTC 1/SC 6 are: == Collaborations == ISO/IEC JTC 1/SC 6 works in close collaboration with a number of other organizations or subcommittees, both internal and external to ISO or IEC. Organizations internal to ISO or IEC that collaborate with or are in liaison with ISO/IEC JTC 1/SC 6 include: ISO/IEC JTC 1/WG 7, Sensor networks ISO/IEC JTC 1/SC 17, Cards and personal identification ISO/IEC JTC 1/SC 25, Interconnection of information technology equipment ISO/IEC JTC 1/SC 27, IT security techniques ISO/IEC JTC 1/SC 29, Coding of audio, picture, multimedia and hypermedia information ISO/IEC JTC 1/SC 31, Automatic identification and data capture techniques ISO/IEC JTC 1/SC 38, Distributed application platforms & services (DAPS) ISO/TC 68, Financial services ISO/TC 122, Packaging ISO/TC 184/SC 5, Interoperability, integration, and architectures for enterprise systems and automation applications ISO/TC 215, Health Informatics IEC/SC 46A, Coaxial cables IEC/SC 46C, Wires and symmetric cables IEC/TC 48, Electrical connectors and mechanical structures for electrical and electronic equipment IEC/SC 48B, Electrical connectors IEC/TC 65, Industrial-process measurement, control and automation IEC/SC 65C, Industrial networks IEC/TC 86, Fibre optics IEC/SC 86C, Fibre optic systems and active devices IEC/TC 93, Design automation Some organizations external to ISO or IEC that collaborate with or are in liaison to ISO/IEC JTC 1/SC 6 include: European Conference of Postal and Telecommunications Administrations (CEPT) European Organization for Nuclear Research (CERN) European Commission (EC) European Telecommunications Standards Institute (ETSI) Ecma International International Civil Aviation Organization (ICAO) IEEE 802 LMSC (LAN/MAN Standards Committee) Internet Society (ISOC) International Telecommunications Satellite Organization (ITSO) ITU-T Organization for the Advancement of Structured Information Standards (OASIS) NFC Forum MFA Forum United Nations Conference on Trade and Development (UNCTAD) United Nations Economic Commission for Europe (UNECE) Universal Postal Union (UPU) World Meteorological Organization (WMO) CEN/TC 247/WG 4 == Member countries == Countries pay a fee to ISO to be members of subcommittees. The 19 "P" (participating) members of ISO/IEC JTC 1/SC 6 are: Austria, Belgium, Canada, China, Czech Republic, Finland, Germany, Greece, Jamaica, Japan, Kazakhstan, Republic of Korea, Netherlands, Russian Federation, Spain, Switzerland, Tunisia, United Kingdom, and United States. The 31 "O" (observing) members of ISO/IEC JTC 1/SC 6 are: Argentina, Bosnia and Herzegovina, Colombia, Cuba, Cyprus, France, Ghana, Hong Kong, Hungary, Iceland, India, Indonesia, Islamic Republic of Iran, Ireland, Italy, Kenya, Luxembourg, Malaysia, Malta, New Zealand, Norway, Philippines, Poland, Romania, Saudi Arabia, Serbia, Singapore, Slovenia, Thailand, Turkey, and Ukraine. == Published standards == There are 365 published standards under the direct responsibility of ISO/IEC JTC 1/SC 6. Published standards by ISO/IEC JTC 1/SC 6 include:
Read more →
Zero-overhead looping

In computer architecture, zero-overhead looping is a hardware feature found in some processors that enables loops to execute without the performance cost of traditional loop control instructions. Instead of software managing loop iterations, the processor's hardware handles repetition automatically, saving clock cycles and improving efficiency. This technique is commonly employed in digital signal processors (DSPs) and certain complex instruction set computer (CISC) architectures. == Background == In many instruction sets, a loop must be implemented by using instructions to increment or decrement a counter, check whether the end of the loop has been reached, and if not jump to the beginning of the loop so it can be repeated. Although this typically only represents around 3–16 bytes of space for each loop, even that small amount could be significant depending on the size of the CPU caches. More significant is that those instructions each take time to execute, time which is not spent doing useful work. The overhead of such a loop is apparent compared to a completely unrolled loop, in which the body of the loop is duplicated exactly as many times as it will execute. In that case, no space or execution time is wasted on instructions to repeat the body of the loop. However, the duplication caused by loop unrolling can significantly increase code size, and the larger size can even impact execution time due to cache misses. (For this reason, it's common to only partially unroll loops, such as transforming it into a loop which performs the work of four iterations in one step before repeating. This balances the advantages of unrolling with the overhead of repeating the loop.) Moreover, completely unrolling a loop is only possible for a limited number of loops: those whose number of iterations is known at compile time. For example, the following C code could be compiled and optimized into the following x86 assembly code: == Implementation == Processors with zero-overhead looping have machine instructions and registers to automatically repeat one or more instructions. Depending on the instructions available, these may only be suitable for count-controlled loops ("for loops") in which the number of iterations can be calculated in advance, or only for condition-controlled loops ("while loops") such as operations on null-terminated strings. === Examples === ==== PIC ==== In the PIC instruction set, the REPEAT and DO instructions implement zero-overhead loops. REPEAT only repeats a single instruction, while DO repeats a specified number of following instructions. ==== Blackfin ==== Blackfin offers two zero-overhead loops. The loops can be nested; if both hardware loops are configured with the same "loop end" address, loop 1 will behave as the inner loop and repeat, and loop 0 will behave as the outer loop and repeat only if loop 1 would not repeat. Loops are controlled using the LTx and LBx registers (x either 0 to 1) to set the top and bottom of the loop — that is, the first and last instructions to be executed, which can be the same for a loop with only one instruction — and LCx for the loop count. The loop repeats if LCx is nonzero at the end of the loop, in which case LCx is decremented. The loop registers can be set manually, but this would typically consume 6 bytes to load the registers, and 8–16 bytes to set up the values to be loaded. More common is to use the loop setup instruction (represented in assembly as either LOOP with pseudo-instruction LOOP_BEGIN and LOOP_END, or in a single line as LSETUP), which optionally initializes LCx and sets LTx and LBx to the desired values. This only requires 4–6 bytes, but can only set LTx and LBx within a limited range relative to where the loop setup instruction is located. ==== x86 ==== The x86 assembly language REP prefixes implement zero-overhead loops for a few instructions (namely MOVS/STOS/CMPS/LODS/SCAS). Depending on the prefix and the instruction, the instruction will be repeated a number of times with (E)CX holding the repeat count, or until a match (or non-match) is found with AL/AX/EAX or with DS:[(E)SI]. This can be used to implement some types of searches and operations on null-terminated strings.
Read more →
Fediverse

The Fediverse (commonly shortened to fedi) is a collection of social networking services that can communicate with each other (formally known as federation) using a common protocol. Users of different websites can send and receive status updates, multimedia files and other data across the network. The term Fediverse is a portmanteau of federation and universe. The majority of Fediverse platforms are based on free and open-source software, and create connections between servers using the ActivityPub protocol. Some software still supports older federation protocols as well, such as OStatus, the Diaspora protocol and Zot, while newer protocols such as AT Protocol connect via network bridges. Diaspora is the only actively developed software project classified under the original definition of Fediverse that does not support ActivityPub. == Design == While a traditional social networking service will host all its content on servers managed by the owner of the website, the decentralized structure of the Fediverse allows any individual or organization to host a social platform using their own servers (referred to as an "instance"). Every instance is independent, and can set its own rules and expectations. Even so, much like how users of one email service such as Gmail can still send emails to users of another service such as Outlook, users may still view content and interact with users on any other instance in the Fediverse. A user on one Mastodon instance, for example, may view and interact with posts made by a user on a different instance even if it is not running Mastodon. Instances hosted by different social networking services may also communicate with one another. A user on the microblogging platform Misskey, for example, may view and interact with posts made by users on Mastodon. Some Fediverse networks even allow users to interact with different social networking formats from the same platform. For example, a user on a social news instance running Lemmy can interact with another post from an mbin instance, a similar service, as well as microblog statuses from Mastodon. === Content moderation and user safety === Decentralized social networking platforms introduce new challenges and difficulties for user trust and safety. By nature of the Fediverse, operators of an instance are solely responsible for moderation of its content. As there is no form of centralized governance or moderation across the Fediverse, it is impossible for an instance to be "removed" from the Fediverse; it can only be defederated per an instance operator's choice, which makes that instance's content inaccessible from the operator's instance. Individual instances are responsible for defining their own content policies, which may then be enforced by its staff. Moderation of a Fediverse instance differs significantly from that of traditional social media platforms, as moderators are responsible not only for content posted by users of that instance ("local users"), but also for content posted by users of other instances ("remote users"). == History == === Historical protocols === The concept and the functionality of the Fediverse existed before the ActivityPub protocol and the term itself. One of the first projects that included support for a decentralized social networking service was Laconica, a microblogging platform which implemented the OpenMicroBlogging protocol for communicating between different installations of the software. The software was later renamed to StatusNet in 2009, before being merged into the GNU social project in 2013 along with Free Social, with the two latter servers being a fork of StatusNet. Over time, the limitations of the OpenMicroBlogging protocol became more apparent, being designed as a one-way text messaging system. To replace the ageing protocol, OStatus was devised as an open standard for microblogging, combining various other technologies like Salmon, Atom, WebSub and ActivityStreams into a single protocol used for communicating between instances. StatusNet first implemented the OStatus protocol on March 3, 2010, with version 0.9.0, and OStatus quickly became the most popular federated protocol in usage. Around the same time as OStatus was gaining popularity, the Diaspora social network was formed, using its own federated protocol. To illustrate the differences between the two protocols, the terms of the Fediverse and the federation began to enter common usage, mainly after 2017. The term "the Fediverse" was used to describe the network formed by software using the OStatus protocol, such as GNU Social, Mastodon, and Friendica, in contrast to the competing diaspora protocol under "the federation". === ActivityPub === In December 2012, the flagship StatusNet instance at the time, identi.ca, transitioned away to a new software named pump.io, with a new federation protocol to replace OStatus. The new protocol was designed to be useful for general activity streams and not just status updates, and replaced many of OStatus' external dependencies with JSON-LD and a REST API for its messaging and inbox systems, as well as making more use of ActivityStreams. While not as utilized as its OStatus predecessor, it would later become influential in the development of the ActivityPub standard. In January 2018, the W3C presented the ActivityPub protocol as a recommended standard. The standard aimed to improve the interoperability between different software packages running on a wide network of servers and to supersede both the OStatus protocol and Pump.io. By 2019, almost all software that was using OStatus had added support for ActivityPub. While Mastodon began to remove OStatus support, other projects maintained it in their code, such as Friendica (which also maintained diaspora support along with ActivityPub). === AT Protocol === A major protocol often contrasted with ActivityPub is the AT Protocol, which powers the Bluesky social network. While both protocols aim to create decentralized social networks, they employ different technical philosophies regarding user identity. Developers of the AT Protocol, including Bluesky CEO Jay Graber, have stated they chose not to use ActivityPub because it did not natively support easy "account portability", the ability for a user to move their account, data, and social graph to a new provider without relying on the original server to authorize the move. In the ActivityPub model (used by Mastodon), a user's identity is typically tied to a specific server, similar to an email address; if that server goes offline, the identity can be lost. The AT Protocol aims to solve this by separating identity from hosting, allowing users to switch providers without losing their identity. Although the two protocols are technically incompatible by default, third-party "bridges" such as Bridgy Fed have been developed to allow users on ActivityPub networks to follow and interact with users on the AT Protocol network, and vice versa. === Other Fediverse protocols === While the Fediverse has traditionally been the network most commonly referred to and used as an example regarding the subject of decentralized social networks, alternatives to it and the accompanying ActivityPub have been developed and deployed. Smaller competitors such as Nostr and Farcaster have become popular within the cryptocurrency community. These protocols have used ActivityPub as a frame of reference for which to design their own architecture, as these newer protocols use a different federation model based on publishing content to relays for distribution rather than ActivityPub's server-centric model. Despite their differences, software exists that permit the bridging of user content between these protocols, including "double-bridges" that span multiple protocols for the purpose of distributing the same content. == Adoption == Users have been slow to embrace the Fediverse due to poor user experience and excessive complexity. Following the acquisition of Twitter by Elon Musk in November 2022, certain major social networks, including Threads, Tumblr and Flipboard, expressed interest in supporting the ActivityPub protocol, as a large number of users began to migrate to Mastodon, a server that supports the Fediverse and was also the most popular alternative to Twitter at the time. Flickr also expressed support in supporting ActivityPub. As of November 2022, no information had been released by Flickr after the initial tweets by the CEO, with support for ActivityPub suspected to be on hold or cancelled. In 2024, the local government of the Stary Sącz municipality in Poland launched their own PeerTube instance in order to de facto abolish its presence on YouTube. According to the government, they stopped using YouTube for official communications "in order to adhere to the appropriate regulations". In the same year, VIVERSE, HTC Vive's metaverse platform, implemented support for ActivityPub in their chat feature, allowing users to send direct messages to other
Read more →
Error level analysis

Error level analysis (ELA) is the analysis of compression artifacts in digital data with lossy compression such as JPEG. == Principles == When used, lossy compression is normally applied uniformly to a set of data, such as an image, resulting in a uniform level of compression artifacts. Alternatively, the data may consist of parts with different levels of compression artifacts. This difference may arise from the different parts having been repeatedly subjected to the same lossy compression a different number of times, or the different parts having been subjected to different kinds of lossy compression. A difference in the level of compression artifacts in different parts of the data may therefore indicate that the data has been edited. In the case of JPEG, even a composite with parts subjected to matching compressions will have a difference in the compression artifacts. In order to make the typically faint compression artifacts more readily visible, the data to be analyzed is subjected to an additional round of lossy compression, this time at a known, uniform level, and the result is subtracted from the original data under investigation. The resulting difference image is then inspected manually for any variation in the level of compression artifacts. In 2007, N. Krawetz denoted this method "error level analysis". Additionally, digital data formats such as JPEG sometimes include metadata describing the specific lossy compression used. If in such data the observed compression artifacts differ from those expected from the given metadata description, then the metadata may not describe the actual compressed data, and thus indicate that the data have been edited. == Limitations == By its nature, data without lossy compression, such as a PNG image, cannot be subjected to error level analysis. Consequently, since editing could have been performed on data without lossy compression with lossy compression applied uniformly to the edited, composite data, the presence of a uniform level of compression artifacts does not rule out editing of the data. Additionally, any non-uniform compression artifacts in a composite may be removed by subjecting the composite to repeated, uniform lossy compression. Also, if the image color space is reduced to 256 colors or less, for example, by conversion to GIF, then error level analysis will generate useless results. More significant, the actual interpretation of the level of compression artifacts in a given segment of the data is subjective, and the determination of whether editing has occurred is therefore not robust. == Controversy == In May 2013, Dr Neal Krawetz used error level analysis on the 2012 World Press Photo of the Year and concluded on his Hacker Factor blog that it was "a composite" with modifications that "fail to adhere to the acceptable journalism standards used by Reuters, Associated Press, Getty Images, National Press Photographer's Association, and other media outlets". The World Press Photo organizers responded by letting two independent experts analyze the image files of the winning photographer and subsequently confirmed the integrity of the files. One of the experts, Hany Farid, said about error level analysis that "It incorrectly labels altered images as original and incorrectly labels original images as altered with the same likelihood". Krawetz responded by clarifying that "It is up to the user to interpret the results. Any errors in identification rest solely on the viewer". In May 2015, the citizen journalism team Bellingcat wrote that error level analysis revealed that the Russian Ministry of Defense had edited satellite images related to the Malaysia Airlines Flight 17 disaster. In a reaction to this, image forensics expert Jens Kriese said about error level analysis: "The method is subjective and not based entirely on science", and that it is "a method used by hobbyists". On his Hacker Factor Blog, the inventor of error level analysis Neal Krawetz criticized both Bellingcat's use of error level analysis as "misinterpreting the results" but also on several points Jens Kriese's "ignorance" regarding error level analysis.
Read more →
Bioelectronics

Bioelectronics is a field of research in the convergence of biology and electronics. == Definitions == At the first C.E.C. Workshop, in Brussels in November 1991, bioelectronics was defined as 'the use of biological materials and biological architectures for information processing systems and new devices'. Bioelectronics, specifically bio-molecular electronics, were described as 'the research and development of bio-inspired (i.e. self-assembly) inorganic and organic materials and of bio-inspired (i.e. massive parallelism) hardware architectures for the implementation of new information processing systems, sensors and actuators, and for molecular manufacturing down to the atomic scale'. The National Institute of Standards and Technology (NIST), an agency of the United States Department of Commerce, defined bioelectronics in a 2009 report as "the discipline resulting from the convergence of biology and electronics". Sources for information about the field include the Institute of Electrical and Electronics Engineers (IEEE) with its Elsevier journal Biosensors and Bioelectronics published since 1990. The journal describes the scope of bioelectronics as seeking to : "... exploit biology in conjunction with electronics in a wider context encompassing, for example, biological fuel cells, bionics and biomaterials for information processing, information storage, electronic components and actuators. A key aspect is the interface between biological materials and micro and nano-electronics." == History == The first known study of bioelectronics took place in the 18th century when Italian physician-scientist Luigi Galvani applied a voltage to a pair of detached frog legs. The legs moved, sparking the genesis of bioelectronics. Electronics technology has been applied to biology and medicine since the pacemaker was invented and with the medical imaging industry. In 2009, a survey of publications using the term in title or abstract suggested that the center of activity was in Europe (43 percent), followed by Asia (23 percent) and the United States (20 percent). == Materials == Organic bioelectronics is the application of organic electronic material to the field of bioelectronics. Organic materials (i.e. containing carbon) show great promise when it comes to interfacing with biological systems. Current applications focus around neuroscience and infection. Conducting polymer coatings, an organic electronic material, shows massive improvement in the technology of materials. It was the most sophisticated form of electrical stimulation. It improved the impedance of electrodes in electrical stimulation, resulting in better recordings and reducing "harmful electrochemical side reactions." Organic Electrochemical Transistors (OECT) were invented in 1984 by Mark Wrighton and colleagues, which had the ability to transport ions. This improved signal-to-noise ratio and gives for low measured impedance. The Organic Electronic Ion Pump (OEIP), a device that could be used to target specific body parts and organs to adhere medicine, was created by Magnuss Berggren. As one of the few materials well established in CMOS technology, titanium nitride (TiN) turned out as exceptionally stable and well suited for electrode applications in medical implants. == Significant applications == Bioelectronics is used to help improve the lives of people with disabilities and diseases. For example, the glucose monitor is a portable device that allows diabetic patients to control and measure their blood sugar levels. Electrical stimulation used to treat patients with epilepsy, chronic pain, Parkinson's, deafness, Essential Tremor and blindness. Magnuss Berggren and colleagues created a variation of his OEIP, the first bioelectronic implant device that was used in a living, free animal for therapeutic reasons. It transmitted electric currents into GABA, an acid. A lack of GABA in the body is a factor in chronic pain. GABA would then be dispersed properly to the damaged nerves, acting as a painkiller. Vagus Nerve Stimulation (VNS) is used to activate the Cholinergic Anti-inflammatory Pathway (CAP) in the vagus nerve, ending in reduced inflammation in patients with diseases like arthritis. Since patients with depression and epilepsy are more vulnerable to having a closed CAP, VNS can aid them as well. At the same time, not all the systems that have electronics used to help improving the lives of people are necessarily bioelectronic devices, but only those which involve an intimate and directly interface of electronics and biological systems. Bioelectronics could be used to develop new label-free methods for monitoring cancer cell invasion and drug resistance. For example, the electrical resistance of cancer cells could be used to predict the effectiveness of cancer drugs and to identify drugs that are most likely to be effective against a particular type of cancer. === Human tissue regeneration === Human tissue, like most tissue in multicellular life, is known to be capable of regeneration. While tissue such as skin and even large organs such as the liver have been shown significant capacity for regeneration much of the adult body is thought to possess limited natural regenerative ability. Research in the field of regenerative medicine has identified that developmental bioelectricity can be used to stimulate and modify tissue growth beyond what naturally occurs with efforts to demonstrate its feasibility in mammals underway. Some researchers believe that future advancements could allow for the regeneration of organs or even entire limbs using bioelectronic devices providing the correct signals. == Future == The improvement of standards and tools to monitor the state of cells at subcellular resolutions is lacking funding and employment. This is a problem because advances in other fields of science are beginning to analyze large cell populations, increasing the need for a device that can monitor cells at such a level of sight. Cells cannot be used in many ways other than their main purpose, like detecting harmful substances. Merging this science with forms of nanotechnology could result in incredibly accurate detection methods. The preserving of human lives like protecting against bioterrorism is the biggest area of work being done in bioelectronics. Governments are starting to demand devices and materials that detect chemical and biological threats. The more the size of the devices decrease, there will be an increase in performance and capabilities.
Read more →
Acquisition of DirecTV by AT&T

AT&T Inc. announced an agreement with the DirecTV Group on May 18, 2014, to acquire the company for $48.5 billion in a joint cash-stock transaction and assumed debts of $18.6 billion for a total offer of $67.1 billion. Due to stalling growth in the wireless sector, AT&T began diversifying into mass media to expand its consumer offerings. After regulatory agencies approved the purchase on July 24, 2015, AT&T briefly became the largest Pay-TV provider. DirecTV was brought under AT&T's communication segment and DirecTV Now was launched on November 30, 2016, as an alternative to cord-cutting. In the years following the purchase, DirecTV lost millions of subscribers across its satellite and streaming services and by 2019, calls grew for AT&T to divest itself off the business. Initially, AT&T rejected these calls and defended the acquisition, but by February 2021, it reached a deal with TPG Inc. to transfer ownership of DirecTV. Under the terms of the agreement, AT&T would retain a 70% majority stake in DirecTV but would no longer oversee its daily operations. The deal was finalized by August 2, 2021, with AT&T receiving $7.1 billion. By July 3, 2025, AT&T sold its majority stake to TPG, ending any ties of involvement. == Background and Development == === AT&T's history === The company to bear the name "AT&T" was founded on March 3, 1885, as American Telephone and Telegraph Company (or AT&T Corporation) by Theodore Newton Vail as a long-distance subsidiary of the Bell Telephone Company. By December 1899, the Bell Telephone's assets were transferred to AT&T, with the latter gaining control of the Bell System, a regional network of local telecom companies. Theodore Vail became AT&T's President in 1907 and under his leadership, AT&T gained a monopoly over the telephone sector in the United States. This near century dominance earned AT&T the nickname of "Ma Bell." In 1974, the U.S. Department of Justice sued AT&T on accounts of antitrust violations. AT&T challenged the lawsuit, but in 1982, it reached a settlement with the DOJ to break apart its Bell System monopoly into seven regional companies. On January 1, 1984, the Bell System came to an end and led to a reshaped telecom industry. One of these regional companies, Southwestern Bell, emerged as the smallest, but after the passage of the 1996 Telecom Act, deregulated telecom rules allowed SBC to become a major telecom company. AT&T briefly became the largest cable and broadband company by the end of the 20th Century, but later deconsolidated to exit those industries. In 2005, SBC acquired its former parent, AT&T, and took on its branding as AT&T Inc, while retaining its previous business history. The newly reincorporated AT&T acquired BellSouth in 2006 and reconstituted much of its former Bell System. === DirecTV's history === == Acquisition Timeline == == Managing DirecTV == == Divestment and Spinoff ==
Read more →
Static web page

A static web page, sometimes called a flat page or a stationary page, is a web page that is delivered to a web browser exactly as stored, in contrast to dynamic web pages which are generated by a web application. Consequently, a static web page displays the same information for all users, from all contexts, subject to modern capabilities of a web server to negotiate content-type or language of the document where such versions are available and the server is configured to do so. However, a webpage's JavaScript can introduce dynamic functionality which may make the static web page dynamic. == Overview == Static web pages are often HTML documents, stored as files in the file system and made available by the web server over HTTP (nevertheless URLs ending with ".html" are not always static). However, loose interpretations of the term could include web pages stored in a database, and could even include pages formatted using a template and served through an application server, as long as the page served is unchanging and presented essentially as stored. The content of static web pages remains stationary irrespective of the number of times it is viewed. Such web pages are suitable for the contents that rarely need to be updated, though modern web template systems are changing this. Maintaining large numbers of static pages as files can be impractical without automated tools, such as static site generators. Any personalization or interactivity has to run client-side, which is restricting. Cloud-based website builders, including Wix, Weebly, and Duda, offer no-code platforms for creating static and dynamic web pages through graphical interfaces, without requiring programming expertise. === Advantages === Provide improved security over dynamic websites (dynamic websites are at risk to web shell attacks if a vulnerability is present) Improved performance for end users compared to dynamic websites Fewer or no dependencies on systems such as databases or other application servers Cost savings from utilizing cloud storage, as opposed to a hosted environment Security configurations are easy to set up, which makes it more secure Static files can be cached by content delivery networks (CDNs) and other intermediate caches, which both reduces page load times at the user and also reduces load on the origin server. Static websites can have improved uptime, since they are still available through any available CDN exit node even when other CDN nodes or the origin webserver are temporarily offline. === Disadvantages === Dynamic functionality must be performed on the client side. After each update of a static website, some or all users may see old, stale, outdated previous versions instead of the latest version until the old version is flushed from CDNs and other caches. == Static site generators == Static site generators are applications that compile static websites - typically populating HTML templates in a predefined folder and file structure, with content supplied in a format such as Markdown or AsciiDoc. === Implementations === Jekyll (powers GitHub Pages) Middleman Hugo Next.js Astro.build Pelican Franklin
Read more →
Vulnerability assessment (computing)

Vulnerability assessment is a process of defining, identifying and classifying the security holes in information technology systems. An attacker can exploit a vulnerability to violate the security of a system. Some known vulnerabilities are Authentication Vulnerability, Authorization Vulnerability and Input Validation Vulnerability. == Purpose == Before deploying a system, it first must go through from a series of vulnerability assessments that will ensure that the build system is secure from all the known security risks. When a new vulnerability is discovered, the system administrator can again perform an assessment, discover which modules are vulnerable, and start the patch process. After the fixes are in place, another assessment can be run to verify that the vulnerabilities were actually resolved. This cycle of assess, patch, and re-assess has become the standard method for many organizations to manage their security issues. The primary purpose of the assessment is to find the vulnerabilities in the system, but the assessment report conveys to stakeholders that the system is secured from these vulnerabilities. If an intruder gained access to a network consisting of vulnerable Web servers, it is safe to assume that he gained access to those systems as well. Because of assessment report, the security administrator will be able to determine how intrusion occurred, identify compromised assets and take appropriate security measures to prevent critical damage to the system. == Assessment types == Depending on the system a vulnerability assessment can have many types and level. === Host assessment === A host assessment looks for system-level vulnerabilities such as insecure file permissions, application level bugs, backdoor and Trojan horse installations. It requires specialized tools for the operating system and software packages being used, in addition to administrative access to each system that should be tested. Host assessment is often very costly in term of time, and thus is only used in the assessment of critical systems. Tools like COPS and Tiger are popular in host assessment. === Network assessment === In a network assessment one assess the network for known vulnerabilities. It locates all systems on a network, determines what network services are in use, and then analyzes those services for potential vulnerabilities. This process does not require any configuration changes on the systems being assessed. Unlike host assessment, network assessment requires little computational cost and effort. == Vulnerability assessment vs penetration testing == Vulnerability assessment and penetration testing are two different testing methods. They are differentiated on the basis of certain specific parameters. == Regulatory requirements == Vulnerability assessments are mandated or strongly recommended by several regulatory frameworks. In the United States healthcare sector, the Health Insurance Portability and Accountability Act (HIPAA) Security Rule requires covered entities to conduct periodic evaluations of their security posture, and a December 2024 Notice of Proposed Rulemaking would explicitly require vulnerability scanning at least every six months for systems containing electronic protected health information. The Payment Card Industry Data Security Standard (PCI DSS) requires quarterly vulnerability scans for organizations that process credit card transactions, and the NIST Cybersecurity Framework includes vulnerability assessment as a core component of its Identify function.
Read more →
Digital inclusion

Digital inclusion involves the activities necessary to ensure equitable access to and use of information and communications technologies for participation in social and economic life including for education, social services, health, social, and community participation. Digital inclusion includes access to affordable broadband Internet services, Internet-enabled devices, access to digital literacy training, quality technical support, and applications and online content designed to enable and encourage self-sufficiency, participation, and collaboration. Related concepts include digital divide, digital exclusion and digital inequality, however digital inclusion focuses more on the strategies, policies, and programs required to address the digital divide. As many services have moved online and with the increasing use of telehealth to deliver primary care, particularly during the COVID-19 pandemic in 2020, digital inclusion, including digital literacy and internet access is increasingly regarded as a social determinant of health. Accessibility, relevance, and impact have been identified as essential elements of digital inclusion as it pertains to health information systems. "Digital inclusion is broadly defined as different strategies designed to ensure that all people have equal access, opportunities and skills to benefit from digital technologies and systems" (ITU, 2019, as cited in Carmi and Yates, 2020). Since 2020, there have been many technology companies that have begun implementing different features or roles within their companies to support breaking down the digital divide. For example, HP has announced the digital divide accelerator. This accelerator will support nonprofits in Greece, Indonesia, Nigeria, and Spain. The goal for this role is to help equip children and other people within the community to understand the skills needed to become a part of the digital community. == Background == With the increasing use of computers and the Internet in the 1990s and early 2000s concerns rose around digital equality, however this primarily focused on the physical access to technology. This gave rise to the concept of the digital divide which was originally developed to describe the growing disparity in Internet access between rural and urban areas of the United States of America. This gradually expanded to considerations of digital access between countries in what is termed the global digital divide, which mirrors many of the disparities seen within countries but on an international scale. However, with the adoption of digital technologies across most sectors of society, and the increasing diversity of technologies and programs, access and use of ICT became more complex and essential for many aspects of daily life. This led to new terminology and a second wave of research on digital inequality which has been identified as the (1) usage gap, (2) second level digital divide, (3) emerging digital differentiation, and (4) digital inclusion. == Strategies for digital inclusion == A review of the literature in 2019 found that while physical access to digital technologies and the internet continues to be a barrier to digital inclusion, digital ability and attitude were also potential barriers. Key strategies identified for improving digital inclusion are social support, direct user experience and collaborative learning/design. Education is a key aspect of digital inclusion as digital technologies have become a key means of engaging with all levels of the education system, requiring levels of digital competence for successful engagement with the curriculum. In addition lifelong learning is required as technologies, services and systems are changing constantly. Public libraries and community service providers play a key role in supporting digital inclusion through access to computers, internet connection and expertise and training. Designing for digital inclusion may also help with poor written literacy, which remains a barrier for 10% of the world's population. UNESCO has developed Guidelines for designing digital technologies in ways that could assist those who are illiterate. == Indigenous digital inclusion == Digital inclusion is a critical issue for many Indigenous communities across the globe, many of whom lack access to adequate resources. The Australian Government has set a National Closing the Gap target for Aboriginal and Torres Strait Islander people to have equal levels of digital inclusion by 2026. Many people on tribal land and in Native Hawaiian land struggle with the technology gap. The Native Entities Capacity and Planning Grant Program has $45.3 million available to help address these challenges and empower Indian Tribes, Alaska Native entities, and Native Hawaiian organizations. Some of the impacts so far are in the education and workforce development and healthcare access through telehealth.[13] == Measuring digital inclusion == The Australian Digital Inclusion Index (ADII) is a research project which has been tracking digital inclusion throughout Australia since 2016. It uses survey data to measure digital inclusion across three dimensions of access, affordability and digital ability. == The Future of Digital Inclusion == On February 16, 2021, a global dialogue within the United Nations (UN) took a look at the future of digital inclusion. Through the adoption of the 2030 UN Agenda for Sustainable Development, Member States made a commitment. They pledged to "leave no one behind." By 2030, the UN's goal is to close the digital divide by providing access to the Internet and mobile technologies for all nations and peoples and for all segments of society. The UN sees the crisis of too many people in our global society still living unconnected and how the digital divide remains a challenge that must be addressed. == Gaming == The Xbox Adaptive Controller is a groundbreaking example of digital inclusion, designed to make gaming more accessible to people with limited mobility. Developed by Microsoft, it features large programmable buttons and ports that connect to a wide range of external devices like switches, joysticks, and mounts, allowing users to customize their gaming experience based on their unique needs. By removing traditional physical barriers to gameplay, the Xbox Adaptive Controller empowers more people to participate in digital entertainment, promotes equal access to technology, and fosters a more inclusive gaming community. == Digital inclusion advocacy groups == Australian Digital Inclusion Alliance National Digital Inclusion Alliance (US)
Read more →
CodePen

CodePen is an online community for testing and showcasing user-created HTML, CSS and JavaScript code snippets. It functions as an online code editor and open-source learning environment, where developers can create code snippets, called "pens," and test them. It was founded in 2012 by full-stack developers Alex Vazquez and Tim Sabat and front-end designer Chris Coyier. Its employees work remotely, rarely all meeting together in person. CodePen is a large community for web designers and developers to showcase their coding skills, with an estimated 330,000 registered users and 14.16 million monthly visitors.
Read more →