AI Detector Extension

AI Detector Extension — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Smoothing

  In statistics and image processing, to smooth a data set is to create an approximating function that attempts to capture important patterns in the data, while leaving out noise or other fine-scale structures/rapid phenomena. In smoothing, the data points of a signal are modified so individual points higher than the adjacent points (presumably because of noise) are reduced, and points that are lower than the adjacent points are increased, leading to a smoother signal. Reducing noise by smoothing may aid in data analysis in two notable ways: Help uncover more meaningful information from the underlying data, such as trends. Provide analyses that are both flexible and robust. Many different algorithms are used in smoothing, most commonly binning, kernels, and local weighted regression. == Compared to curve fitting == Smoothing may be distinguished from the related and partially overlapping concept of curve fitting in the following ways: curve fitting often involves the use of an explicit function form for the result, whereas the immediate results from smoothing are the "smoothed" values with no later use made of a functional form if there is one; the aim of smoothing is to give a general idea of relatively slow changes of value with little attention paid to the close matching of data values, while curve fitting concentrates on achieving as close a match as possible. smoothing methods often have an associated tuning parameter which is used to control the extent of smoothing. Curve fitting will adjust any number of parameters of the function to obtain the 'best' fit. == Linear smoothers == In the case that the smoothed values can be written as a linear transformation of the observed values, the smoothing operation is known as a linear smoother; the matrix representing the transformation is known as a smoother matrix or hat matrix. The operation of applying such a matrix transformation is called convolution. Thus the matrix is also called convolution matrix or a convolution kernel. In the case of simple series of data points (rather than a multi-dimensional image), the convolution kernel is a one-dimensional vector. == Algorithms == One of the most common algorithms is the "moving average", often used to try to capture important trends in repeated statistical surveys. In image processing and computer vision, smoothing ideas are used in scale space representations. The simplest smoothing algorithm is the "rectangular" or "unweighted sliding-average smooth". This method replaces each point in the signal with the average of "m" adjacent points, where "m" is a positive integer called the "smooth width". Usually m is an odd number. The triangular smooth is like the rectangular smooth except that it implements a weighted smoothing function. Some specific smoothing and filter types, with their respective uses, pros and cons are:

  Read more →
• 

  The Drivers Cooperative

  The Drivers Cooperative or Co-Op Ride is an American ridesharing company and mobile app that is a workers cooperative, owned collectively by the drivers. The cooperative launched in May 2021 in New York City, with the first 2,500 drivers issued their ownership certificates in a media event. The cooperative was co-founded by Grenadan immigrant and for hire vehicle driver Ken Lewis, labor organizer Erik Forman, and former Uber executive Alissa Orlando. Mohammad Hossen is the first member of the drivers' advisory board, which they plan to expand democratically as more drivers are onboarded. Other staff include software and industry veterans and in addition to co-founder Lewis, there are other drivers in management roles such as ex-driver and organizer David Alexis. The Co-Op Ride app is on the iOS and Android platforms and is built on Google Maps, Stripe, and Waze. By July, the app had been downloaded by 30,000 users and the number of drivers increased to 3,400, and by August there were 40,000 users. The cooperative is owned by the drivers themselves, and takes 15% from each ride for business overhead costs, as opposed to the 25% to 40% ride hail apps like Uber or Lyft take per ride. While being ultimately owned by the driver members, not by investors, the cooperative began with seed money from the Minnesota-based Community Development Financial Institution Shared Capital Cooperative, the local Lower East Side People's Federal Credit Union, and welcomed individual donations via crowdfunding in the form of revenue sharing debt on Wefunder. Each driver is a member of the cooperative and owns one share of the company and one vote in business and leadership decisions. In addition to a larger percentage of the fees per ride driven, each driver as a part-owner will also receive a share of the company's profits after loans and other expenses are paid, in the form of weighted dividends. The drivers use their own cars. The cooperative vets its owner-members further than what is already performed by the New York City Taxi and Limousine Commission (TLC), and gives a fixed price when a car is ordered and does not engage in surge pricing. The TLC imposed a minimum payrate for mobile app ridesharing companies operating in New York city in 2018. In 2021 that is $1.26 per mile which Uber and Lyft do not pay above; the cooperative pays a minimum mileage of $1.64. The cooperative intends to be able to set aside 10% of profits to community foundations and other non-profits and community organizations. The cooperative has engaged in advocacy around a policy agenda voted on by its members. Legislation to achieve this policy goal was introduced by State Senator Julia Salazar and Assemblymember Jessica González-Rojas, with the support of a coalition led by The Drivers Cooperative, United Auto Workers Region 9 and 9A, Sunrise Movement, New York Lawyers for the Public Interest, and New York Communities for Change.

  Read more →
• 

  Prosthesis

  In medicine, a prosthesis (pl.: prostheses; from Ancient Greek: πρόσθεσις, romanized: prósthesis, lit. 'addition, application, attachment'), or a prosthetic implant, is an artificial device that replaces a missing body part, which may be lost through physical trauma, disease, or a condition present at birth (congenital disorder). Prostheses may restore the normal functions of the missing body part, or may perform a cosmetic function. A person who has undergone an amputation is sometimes referred to as an amputee, Rehabilitation for someone with an amputation is primarily coordinated by a physiatrist as part of an inter-disciplinary team consisting of physiatrists, prosthetists, nurses, physical therapists, and occupational therapists. Prostheses can be created by hand or with computer-aided design (CAD), a software interface that helps creators design and analyze the creation with computer-generated 2-D and 3-D graphics as well as analysis and optimization tools. == Types == A person's prosthetic device should be designed and assembled to meet their individual appearance and functional needs. Depending on personal circumstances, co-morbidities, budget or health insurance coverage, and access to medical care, decisions may need to balance aesthetics and function. In addition, for some individuals, a myoelectric device, a body-powered device, or an activity-specific device may be appropriate options. The person's future goals and vocational aspirations and potential capabilities may help them choose between one or more devices. Craniofacial prostheses include intra-oral and extra-oral prostheses. Extra-oral prostheses are further divided into hemifacial, auricular (ear), nasal, orbital and ocular. Intra-oral prostheses include dental prostheses, such as dentures, obturators, and dental implants. Prostheses of the neck include larynx substitutes, trachea and upper esophageal replacements, Some prostheses of the torso include breast prostheses which may be either single or bilateral, full breast devices or nipple prostheses. Penile prostheses are used to treat erectile dysfunction, perform phalloplasty procedures in men, and to build a new penis in female-to-male gender reassignment surgeries. === Limb prostheses === Limb prostheses include both upper- and lower-extremity prostheses. Upper-extremity prostheses are used at varying levels of amputation: forequarter, shoulder disarticulation, transhumeral prosthesis, elbow disarticulation, transradial prosthesis, wrist disarticulation, full hand, partial hand, finger, partial finger. A transradial prosthesis is an artificial limb that replaces an arm missing below the elbow. Upper limb prostheses can be categorized in three main categories: Passive devices, Body Powered devices, and Externally Powered (myoelectric) devices. Passive devices can either be passive hands, mainly used for cosmetic purposes, or passive tools, mainly used for specific activities (e.g. leisure or vocational). An extensive overview and classification of passive devices can be found in a literature review by Maat et.al. A passive device can be static, meaning the device has no movable parts, or it can be adjustable, meaning its configuration can be adjusted (e.g. adjustable hand opening). Despite the absence of active grasping, passive devices are very useful in bimanual tasks that require fixation or support of an object, or for gesticulation in social interaction. According to scientific data a third of the upper limb amputees worldwide use a passive prosthetic hand. Body Powered or cable-operated limbs work by attaching a harness and cable around the opposite shoulder of the damaged arm. A recent body-powered approach has explored the utilization of the user's breathing to power and control the prosthetic hand to help eliminate actuation cable and harness. The third category of available prosthetic devices comprises myoelectric arms. This particular class of devices distinguishes itself from the previous ones due to the inclusion of a battery system. This battery serves the dual purpose of providing energy for both actuation and sensing components. While actuation predominantly relies on motor or pneumatic systems, a variety of solutions have been explored for capturing muscle activity, including techniques such as Electromyography, Sonomyography, Myokinetic, and others. These methods function by detecting the minute electrical currents generated by contracted muscles during upper arm movement, typically employing electrodes or other suitable tools. Subsequently, these acquired signals are converted into gripping patterns or postures that the artificial hand will then execute. In the prosthetics industry, a trans-radial prosthetic arm is often referred to as a "BE" or below elbow prosthesis. Lower-extremity prostheses provide replacements at varying levels of amputation. These include hip disarticulation, transfemoral prosthesis, knee disarticulation, transtibial prosthesis, Syme's amputation, foot, partial foot, and toe. The two main subcategories of lower extremity prosthetic devices are trans-tibial (any amputation transecting the tibia bone or a congenital anomaly resulting in a tibial deficiency) and trans-femoral (any amputation transecting the femur bone or a congenital anomaly resulting in a femoral deficiency). A transfemoral prosthesis is an artificial limb that replaces a leg missing above the knee. Transfemoral amputees can have a very difficult time regaining normal movement. In general, a transfemoral amputee must use approximately 80% more energy to walk than a person with two whole legs. This is due to the complexities in movement associated with the knee. In newer and more improved designs, hydraulics, carbon fiber, mechanical linkages, motors, computer microprocessors, and innovative combinations of these technologies are employed to give more control to the user. In the prosthetics industry, a trans-femoral prosthetic leg is often referred to as an "AK" or above the knee prosthesis. A transtibial prosthesis is an artificial limb that replaces a leg missing below the knee. A transtibial amputee is usually able to regain normal movement more readily than someone with a transfemoral amputation, due in large part to retaining the knee, which allows for easier movement. Lower extremity prosthetics describe artificially replaced limbs located at the hip level or lower. In the prosthetics industry, a transtibial prosthetic leg is often referred to as a "BK" or below the knee prosthesis. Prostheses are manufactured and fit by clinical prosthetists. Prosthetists are healthcare professionals responsible for making, fitting, and adjusting prostheses and for lower limb prostheses will assess both gait and prosthetic alignment. Once a prosthesis has been fit and adjusted by a prosthetist, a rehabilitation physiotherapist (called physical therapist in America) will help teach a new prosthetic user to walk with a leg prosthesis. To do so, the physical therapist may provide verbal instructions and may also help guide the person using touch or tactile cues. This may be done in a clinic or home. There is some research suggesting that such training in the home may be more successful if the treatment includes the use of a treadmill. Using a treadmill, along with the physical therapy treatment, helps the person to experience many of the challenges of walking with a prosthesis. In the United Kingdom, 75% of lower limb amputations are performed due to inadequate circulation (dysvascularity). This condition is often associated with many other medical conditions (co-morbidities) including diabetes and heart disease that may make it a challenge to recover and use a prosthetic limb to regain mobility and independence. For people who have inadequate circulation and have lost a lower limb, there is insufficient evidence due to a lack of research, to inform them regarding their choice of prosthetic rehabilitation approaches. Lower extremity prostheses are often categorized by the level of amputation or after the name of a surgeon: Transfemoral (Above-knee) Transtibial (Below-knee) Ankle disarticulation (more commonly known as Syme's amputation) Knee disarticulation (also see knee replacement) Hip disarticulation, (also see hip replacement) Hemi-pelvictomy Partial foot amputations (Pirogoff, Talo-Navicular and Calcaneo-cuboid (Chopart), Tarso-metatarsal (Lisfranc), Trans-metatarsal, Metatarsal-phalangeal, Ray amputations, toe amputations). Van Nes rotationplasty ==== Prosthetic raw materials ==== Prosthetic are made lightweight for better convenience for the amputee. Some of these materials include: Plastics: Polyethylene Polypropylene Acrylics Polyurethane Wood (early prosthetics) Rubber (early prosthetics) Lightweight metals: Aluminum Composites: Carbon fiber reinforced polymers Wheeled prostheses have also been used extensively in the rehabilitation of injured domestic animals, including dogs, cats, pigs, rabbits, and

  Read more →
• 

  Amira (software)

  Amira (ah-MEER-ah) is a software platform for visualization, processing, and analysis of 3D and 4D data. It is being actively developed by Thermo Fisher Scientific in collaboration with the Zuse Institute Berlin (ZIB), and commercially distributed by Thermo Fisher Scientific — together with its sister software Avizo. == Overview == Amira is an extendable software system for scientific visualization, data analysis, and presentation of 3D and 4D data. It is used by researchers and engineers in academia and industry. It is a tool for processing, analysis and visualization of data from various modalities; e.g. micro-CT, PET, Ultrasound. It is used in many fields, such as microscopy in biology and materials science, molecular biology, quantum physics, astrophysics, computational fluid dynamics (CFD), finite element modeling (FEM), non-destructive testing (NDT), and many more. One of the key features, besides data visualization, is Amira's set of tools for image segmentation and geometry reconstruction. This allows the user to mark (or segment) structures and regions of interest in 3D image volumes using automatic, semi-automatic, and manual tools. The segmentation can then be used for a variety of subsequent tasks, such as volumetric analysis, density analysis, shape analysis, or the generation of 3D computer models for visualization, numerical simulations, or rapid prototyping or 3D printing. Other key Amira features are multi-planar and volume visualization, image registration, filament tracing, cell separation and analysis, tetrahedral mesh generation, fiber-tracking from diffusion tensor imaging (DTI) data, skeletonization, spatial graph analysis, and stereoscopic rendering of 3D data over multiple displays and immersive virtual reality environments, including CAVEs. As a commercial product Amira requires the purchase of a license or an academic subscription. A time-limited, but full-featured evaluation version is available for download free of charge. == History == === 1993–1998: Research software === Amira's roots go back to 1993 and the Department for Scientific Visualization, headed by Hans-Christian Hege at the Zuse Institute Berlin (ZIB). The ZIB is a research institute for mathematics and informatics. The Scientific Visualization department's mission is to help solve computationally and scientifically challenging tasks in medicine, biology, engineering and materials science. For this purpose, it develops algorithms and software for 2D, 3D, and 4D data visualization and visually supported exploration and analysis. At that time, the young visualization group at the ZIB had experience with the extendable, data flow-oriented visualization environments apE, IRIS Explorer, and Advanced Visualization Studio (AVS), but was not satisfied with these products' interactivity, flexibility, and ease-of-use for non-computer scientists. Therefore, the development of a new software system was started in a research project within a medically oriented, multi-disciplinary collaborative research center. Based on experiences that Tobias Höllerer had gained in late 1993 with the new graphics library IRIS Inventor, it was decided to utilize that library. The development of the medical planning system was performed by Detlev Stalling, who later became the chief software architect of Amira. The new software was called "HyperPlan", highlighting its initial target application – a planning system for hyperthermia cancer treatment. The system was being developed on Silicon Graphics (SGI) computers, which at the time were the standard workstations used for high-end graphics computing. The software was based on libraries such as OpenGL (originally IRIS GL), Open Inventor (originally IRIS Inventor), and the graphical user interface libraries X11, Motif (software), and ViewKit. In 1998, X11/Motif/Viewkit were replaced by the Qt toolkit. The HyperPlan framework served as the base for more and more projects at the ZIB and was used by a growing number of researchers in collaborating institutions. The projects included applications in medical image computing, medical visualization, neurobiology, confocal microscopy, flow visualization, molecular analytics and computational astrophysics. === 1998–today: Commercially supported product === The growing number of users of the system started to exceed the capacities that ZIB could spare for software distribution and support, as ZIB's primary mission was algorithmic research. Therefore, the spin-off company Indeed – Visual Concepts GmbH was founded by Hans-Christian Hege, Detlev Stalling, and Malte Westerhoff. In Feb 1998 the HyperPlan software was given the new, application-neutral name "Amira". This name is not an acronym, but was chosen for being pronounceable in different languages and providing a suitable connotation, namely "to look at" or "to wonder at", from the Latin verb "admirare" (to admire), which reflects a basic situation in data visualization. A major re-design of the software was undertaken by Detlev Stalling and Malte Westerhoff in order to make it a commercially supportable product and to make it available on non-SGI computers as well. In March 1999, the first version of the commercial Amira was exhibited at the CeBIT tradeshow in Hannover, Germany on SGI IRIX and Hewlett-Packard UniX (HP-UX) booths. Versions for Linux and Microsoft Windows followed within the following twelve months. Later Mac OS X support was added. Indeed – Visual Concepts GmbH selected the Bordeaux, France and San Diego, United States based company TGS, Inc. as the worldwide distributor for Amira and completed five major releases (up to version 3.1) in the subsequent four years. In 2003 both Indeed – Visual Concepts GmbH, as well as TGS, Inc. were acquired by Massachusetts-based Mercury Computer Systems, Inc. (NASDAQ:MRCY) and became part of Mercury's newly formed life sciences business unit, later branded Visage Imaging. In 2009, Mercury Computer Systems, Inc. spun off Visage Imaging again and sold it to Melbourne, Australia based Promedicus Ltd (ASX:PME), a leading provider of radiology information systems and medical IT solutions. During this time, Amira continued to be developed in Berlin, Germany and in close collaboration with the ZIB, still headed by the original creators of Amira. TGS, located in Bordeaux, France was sold by Mercury Computer systems to a French investor and renamed to Visualization Sciences Group (VSG). VSG continued the work on a complementary product named Avizo, based on the same source code but customized for material sciences. In August 2012, FEI, to that date the largest OEM reseller of Amira, purchased VSG and the Amira business from Promedicus. This brought the two software sisters Amira and Avizo back into one hand. In August 2013, Visualization Sciences Group (VSG) became a business unit of FEI. In 2016 FEI has been bought by Thermo Fisher Scientific and became part of its Materials & Structural Analysis division in early 2017. Amira and Avizo are still being marketed as two different products; Amira for life sciences and Avizo for materials science, but the development efforts are now joined once again. In the meantime, the number of scientific articles using the Amira / Avizo software, is in the order of 10 thousands. == Amira options == === Microscopy option === Specific readers for microscopy data Image deconvolution Exploration of 3D imagery obtained from virtually any microscope Extraction and editing of filament networks from microscopy images === DICOM reader === Import of clinical and preclinical data in DICOM format === Mesh option === Generation of 3D finite element (FE) meshes from segmented image data Support for many state-of-the-art FE solver formats High-quality visualization of simulation mesh-based results, using scalar, vector, and tensor field display modules === Skeletonization option === Reconstruction and analysis of neural and vascular networks Visualization of skeletonized networks Length and diameter quantification of network segments Ordering of segments in a tree graph Skeletonization of very large image stacks === Molecular option === Advanced tools for the visualization of molecule models Hardware-accelerated volume rendering Powerful molecule editor Specific tools for complex molecular visualization === Developer option === Creation of new custom components for visualizing or data processing Implementation of new file readers or writers C++ programming language Development wizard for getting started quickly === Neuro option === Medical image analysis for DTI and brain perfusion Fiber tracking supporting several stream-line based algorithms Fiber separation into fiber bundles based on user defined source and destination regions Computation of tensor fields, diffusion weighted maps Eigenvalue decomposition of tensor fields Computation of mean transit time, cerebral blood flow, and cerebral blood volume === VR option === Visualization of data on large tiled displays

  Read more →
• 

  Apache ORC

  Apache ORC (Optimized Row Columnar) is a free and open-source column-oriented data storage format. It is similar to the other columnar-storage file formats available in the Hadoop ecosystem such as RCFile and Parquet. It is used by most of the data processing frameworks Apache Spark, Apache Hive, Apache Flink, and Apache Hadoop. In February 2013, the Optimized Row Columnar (ORC) file format was announced by Hortonworks in collaboration with Facebook. A calendar month later, the Apache Parquet format was announced, developed by Cloudera and Twitter. Apache ORC format is widely supported including Amazon Web Services' Glue,Google Cloud Platform's BigQuery, and Pandas (software). == History ==

  Read more →
• 

  Multisample anti-aliasing

  Multisample anti-aliasing (MSAA) is a type of spatial anti-aliasing, a technique used in computer graphics to remove jaggies. It is an optimization of supersampling, where only the necessary parts are sampled more. Jaggies are only noticed in a small area, so the area is quickly found, and only that is anti-aliased. == Definition == The term generally refers to a special case of supersampling. Initial implementations of full-scene anti-aliasing (FSAA) worked conceptually by simply rendering a scene at a higher resolution, and then downsampling to a lower-resolution output. Most modern GPUs are capable of this form of anti-aliasing, but it greatly taxes resources such as texture, bandwidth, and fillrate. (If a program is highly TCL-bound or CPU-bound, supersampling can be used without much performance hit.) According to the OpenGL GL_ARB_multisample specification, "multisampling" refers to a specific optimization of supersampling. The specification dictates that the renderer evaluate the fragment program once per pixel, and only "truly" supersample the depth and stencil values. (This is not the same as supersampling but, by the OpenGL 1.5 specification, the definition had been updated to include fully supersampling implementations as well.) In graphics literature in general, "multisampling" refers to any special case of supersampling where some components of the final image are not fully supersampled. The lists below refer specifically to the ARB_multisample definition. == Description == In supersample anti-aliasing, multiple locations are sampled within every pixel, and each of those samples is fully rendered and combined with the others to produce the pixel that is ultimately displayed. This is computationally expensive, because the entire rendering process must be repeated for each sample location. It is also inefficient, as aliasing is typically only noticed in some parts of the image, such as the edges, whereas supersampling is performed for every single pixel. In multisample anti-aliasing, if any of the multi sample locations in a pixel is covered by the triangle being rendered, a shading computation must be performed for that triangle. However this calculation only needs to be performed once for the whole pixel regardless of how many sample positions are covered; the result of the shading calculation is simply applied to all of the relevant multi sample locations. In the case where only one triangle covers every multi sample location within the pixel, only one shading computation is performed, and these pixels are little more expensive than (and the result is no different from) the non-anti-aliased image. This is true of the middle of triangles, where aliasing is not an issue. (Edge detection can reduce this further by explicitly limiting the MSAA calculation to pixels whose samples involve multiple triangles, or triangles at multiple depths.) In the extreme case where each of the multi sample locations is covered by a different triangle, a different shading computation will be performed for each location and the results then combined to give the final pixel, and the result and computational expense are the same as in the equivalent supersampled image. The shading calculation is not the only operation that must be performed on a given pixel; multisampling implementations may variously sample other operations such as visibility at different sampling levels. == Advantages == The pixel shader usually only needs to be evaluated once per pixel for every triangle covering at least one sample point. The edges of polygons (the most obvious source of aliasing in 3D graphics) are anti-aliased. Since multiple subpixels per pixel are sampled, polygonal details smaller than one pixel that might have been missed without MSAA can be captured and made a part of the final rendered image if enough samples are taken. == Disadvantages == === Alpha testing === Alpha testing is a technique common to older video games used to render translucent objects by rejecting pixels from being written to the framebuffer. If the alpha value of a translucent fragment (pixel) is below a specified threshold, it will be discarded. Because this is performed on a pixel by pixel basis, the image does not receive the benefits of multi-sampling (all of the multisamples in a pixel are discarded based on the alpha test) for these pixels. The resulting image may contain aliasing along the edges of transparent objects or edges within textures, although the image quality will be no worse than it would be without any anti-aliasing. Translucent objects that are modelled using alpha-test textures will also be aliased due to alpha testing. This effect can be minimized by rendering objects with transparent textures multiple times, although this would result in a high performance reduction for scenes containing many transparent objects. === Aliasing === Because multi-sampling calculates interior polygon fragments only once per pixel, aliasing and other artifacts will still be visible inside rendered polygons where fragment shader output contains high frequency components. === Performance === While less performance-intensive than SSAA (supersampling), it is possible in certain scenarios (scenes heavy in complex fragments) for MSAA to be multiple times more intensive for a given frame than post processing anti-aliasing techniques such as FXAA, SMAA and MLAA. Early techniques in this category tend towards a lower performance impact, but suffer from accuracy problems. More recent post-processing based anti-aliasing techniques such as temporal anti-aliasing (TAA), which reduces aliasing by combining data from previously rendered frames, have seen the reversal of this trend, as post-processing AA becomes both more versatile and more expensive than MSAA, which cannot antialias an entire frame alone. == Sampling methods == === Point sampling === In a point-sampled mask, the coverage bit for each multisample is only set if the multisample is located inside the rendered primitive. Samples are never taken from outside a rendered primitive, so images produced using point-sampling will be geometrically correct, but filtering quality may be low because the proportion of bits set in the pixel's coverage mask may not be equal to the proportion of the pixel that is actually covered by the fragment in question. === Area sampling === Filtering quality can be improved by using area sampled masks. In this method, the number of bits set in a coverage mask for a pixel should be proportionate to the actual area coverage of the fragment. This will result in some coverage bits being set for multisamples that are not actually located within the rendered primitive, and can cause aliasing and other artifacts. == Sample patterns == === Regular grid === A regular grid sample pattern, where multisample locations form an evenly spaced grid throughout the pixel, is easy to implement and simplifies attribute evaluation (i.e. setting subpixel masks, sampling color and depth). This method is computationally expensive due to the large number of samples. Edge optimization is poor for screen-aligned edges, but image quality is good when the number of multisamples is large. === Sparse regular grid === A sparse regular grid sample pattern is a subset of samples that are chosen from the regular grid sample pattern. As with the regular grid, attribute evaluation is simplified due to regular spacing. The method is less computationally expensive due to having a fewer samples. Edge optimization is good for screen aligned edges, and image quality is good for a moderate number of multisamples. === Stochastic sample patterns === A stochastic sample pattern is a random distribution of multisamples throughout the pixel. The irregular spacing of samples makes attribute evaluation complicated. The method is cost efficient due to low sample count (compared to regular grid patterns). Edge optimization with this method, although sub-optimal for screen aligned edges. Image quality is excellent for a moderate number of samples. == Quality == Compared to supersampling, multisample anti-aliasing can provide similar quality at higher performance, or better quality for the same performance. Further improved results can be achieved by using rotated grid subpixel masks. The additional bandwidth required by multi-sampling is reasonably low if Z and colour compression are available. Most modern GPUs support 2×, 4×, and 8× MSAA samples. Higher values result in better quality, but are slower.

  Read more →
• 

  Productivity software

  Productivity software (also called personal productivity software or office productivity software) is application software used for producing information (such as documents, presentations, worksheets, databases, charts, graphs, digital paintings, electronic music and digital video). Its names arose from it increasing productivity, especially of individual office workers, from typists to knowledge workers, although its scope is now wider than that. Office suites, which brought word processing, spreadsheet, and relational database programs to the desktop in the 1980s, are the core example of productivity software. They revolutionized the office with the magnitude of the productivity increase they brought as compared with the pre-1980s office environments of typewriters, paper filing, and handwritten lists and ledgers. In the United States, as of 2015, some 78% of "middle-skill" occupations (those that call for more than a high school diploma but less than a bachelor's degree) required the use of productivity software. == Details == Productivity software traditionally runs directly on a computer. For example, Plus/4 model of computer contains in ROM for applications of productivity software. Productivity software is one of the reasons people use personal computers. == Office suite == An office suite is a bundle of productivity software (a software suite) intended to be used by office workers. The components are generally distributed together, have a consistent user interface and usually can interact with each other, sometimes in ways that the operating system would not normally allow. The earliest office suite for personal computers was MicroPro International's StarBurst in the early 1980s, comprising the WordStar word processor, the CalcStar spreadsheet and the DataStar database software. Other suites arose in the 1980s, and Microsoft Office came to dominate the market in the 1990s, a position it retains as of 2024. During the 1990s, office suite products gained popularity by offering bundles of applications that, when bought as part of a suite, effectively discounted the individual applications, with four or five applications being bundled for the price of two applications bought separately. When faced with such potential savings, customers could be "tempted by the suite, rather than the value of a particular product", and by 1994 more than 60 percent of the sales of Microsoft Word and around 70 percent of the sales of Microsoft Excel were as part of sales of Microsoft Office. Such considerations had an impact on vendors of individual applications, often smaller companies, raising concerns that office suites were "stifling innovation", and even established vendors such as Borland and WordPerfect were having to adapt to the suite phenomenon, Borland ultimately deciding to sell its Quattro Pro spreadsheet to WordPerfect as the latter sought to assemble its own suite product. The dominant suite vendors, Microsoft and Lotus, downplayed competition and innovation concerns, claiming that users were still able to exercise choice and that "user-driven development" was guiding the evolution of office suites. Another view was that component-based software would eventually emerge, focusing development on more specialised components used by productivity software, empowering "a plethora of third-party developers", and that a "mix and match" approach of such components would adapt to the user's way of working. === Office suite components === The base components of office suites are: Word processor Spreadsheet Presentation program Other components include: Database software Graphics suite (raster graphics editor, vector graphics editor, image viewer) Desktop publishing software Formula editor Diagramming software Email client Communication software Personal information manager Notetaking Groupware Project management software Table (information) Web log analysis software

  Read more →
• 

  Sub-pixel resolution

  In digital image processing, sub-pixel resolution can be obtained in images constructed from sources with information exceeding the nominal pixel resolution of said images. == Example == For example, if the image of a ship of length 50 metres (160 ft), viewed side-on, is 500 pixels long, the nominal resolution (pixel size) on the side of the ship facing the camera is 0.1 metres (3.9 in). Now sub-pixel resolution of well resolved features can measure ship movements which are an order of magnitude (10×) smaller. Movement is specifically mentioned here because measuring absolute positions requires an accurate lens model and known reference points within the image to achieve sub-pixel position accuracy. Small movements can however be measured (down to 1 cm) with simple calibration procedures. Specific fit functions often suffer specific bias with respect to image pixel boundaries. Users should therefore take care to avoid these "pixel locking" (or "peak locking") effects. == Determining feasibility == Whether features in a digital image are sharp enough to achieve sub-pixel resolution can be quantified by measuring the point spread function (PSF) of an isolated point in the image. If the image does not contain isolated points, similar methods can be applied to edges in the image. It is also important when attempting sub-pixel resolution to keep image noise to a minimum. This, in the case of a stationary scene, can be measured from a time series of images. Appropriate pixel averaging, through both time (for stationary images) and space (for uniform regions of the image) is often used to prepare the image for sub-pixel resolution measurements.

  Read more →
• 

  Wumpus world

  Wumpus world is a simple world use in artificial intelligence for which to represent knowledge and to reason. Wumpus world was introduced by Michael Genesereth, and is discussed in the Russell-Norvig Artificial Intelligence book Artificial Intelligence: A Modern Approach. Wumpus World is loosely inspired by the 1972 video game Hunt the Wumpus. == Problem description == In Artificial Intelligence: A Modern Approach, the wumpus world features a 4x4 grid, containing a monster called a wumpus, multiple bottomless pits and hidden gold. The agent starts at (1,1) and has to find the gold and return to the starting position. The agent loses 1 point for every move and gains 1000 points for bringing the gold to the starting position. The agent can sense pits by a breeze, stench indicates a wumpus, and sparkle indicates gold. The wumpus can be killed by an arrow but costs 10 points.

  Read more →
• 

  Aldus PhotoStyler

  Aldus PhotoStyler was a graphics software program developed by the Taiwanese company Ulead. Released in June 1991 as the first 24 bit image editor for Windows, it was bought the same year by the Aldus Prepress group. Its main competition was Adobe Photoshop. Version 2.0 (late 1993) introduced a new user interface and improved color calibration. PhotoStyler SE - lacking some features of the version 2.0 - was bundled with scanners like HP ScanJet. The product disappeared from the Adobe product line after Adobe acquired Aldus in 1994.

  Read more →
• 

  Fyuse

  Fyuse is a spatial photography app which lets users capture and share interactive 3D images. By tilting or swiping one's smartphone, one can view such "fyuses" from various angles — as if one were walking around an object or subject. The app blends photography and video to create an interactive medium and was first published for iOS in April 2014. The Android version was released at the end of 2014. == The app == Fyuse lets users capture panoramas, selfies, and full 360° views of objects and allows one to view captured moments from different angles. It has its own personal gallery, social network and standalone web integration. With the app, Fyusion also created a social networking platform similar to Instagram. Fyuses can be shared, commented on, liked and re-shared to one's followers (called Echoes). One can build a network of followers and with engagement tracking, one can see how many times an image has been interacted with The images can also be saved for private, offline view, or shared to other social networks, like Facebook or Twitter, or embedded on a website where the images can be interacted with by desktop users via dragging the mouse. Furthermore, in the compass tab other fyuses can be discovered using the app's system of tags and categories. One's Fyuse feed is prepopulated with top users, and one can follow people to see when they post a new fyuse. The app will also find one's friends if one signs up with Facebook or connects it with one's Twitter account. To create a fyuse one moves around a person or object with one's phone's camera in one direction or moving/tilting one's phone around while holding one's finger on the screen. By combining photography and video the app allows one to capture moments that one may not have otherwise been able to capture by recording not one moment in time but stitched together little moments. According to Fyusion CEO Radu Rusu, a photo freezes a moment in time, while a video captures moments in a linear timeline — both still flat, when viewed. A fyuse image captures a moment in space, where one can not only see one side of something, but also around it. When it is done rendering, fyuses can also be edited – one can trim the fyuse for length and edit the brightness, contrast, exposure, saturation and sharpness. One can also add a vignette and apply a filters, with options to adjust their intensity. After editing, one can write a description, add hashtags, and tag parts of the fyuse before one can (voluntarily) publish and share it. Version 1.0 has been described as "alpha prototype" and version 2.0 was released on 17 December 2014. Version 3.0 introduced 3D tagging by which users can layer 3D graphic that animate accordingly with each interaction to add some context to the content. Version 4.0 was released on December 21, 2016 for iOS. Since January 2016 (v3.2) the app allows the export of fyuses as Live Photos. The app has also been described as a more sophisticated version of 3D stickers and flip images. == Applications == The app has many applications for e-commerce such as for fashion designers who want to showcase a garment from every angle, or real estate listings and Airbnb-type sites that want to make their rental properties seem as enticing as possible. The app can also be used for interactive art, 360° panoramas and selfies. == History == San Francisco-based Fyusion Inc.'s three founders — Radu B. Rusu, CTO Stefan Holzer, and VP of Engineering Stephen Miller — worked together at Willow Garage, the robotics research lab started by early Google employee Scott Hassan in the area of "personal robotics" — Hassan decided to turn the lab into more of an incubator, suggesting that the members spin off their technologies into consumer-facing enterprises. Rusu first set out with an open-source 3D perception software startup called Open Perception. Fyusion was officially founded in 2013, and soon after Rusu and his cofounders patented the technology for spatial photography. The company closed a seed funding round at the end of May, raising $3.35 million from investors, including an angel investment from Sun Microsystems cofounder Andreas Bechtolsheim. In 2014 the Fyuse team consisted of 13 employees, mostly engineers and designers, recruited from around the globe. In March 2015 the team displayed their app at Katy Perry's premiere for the movie "Prismatic World Tour on Epix" where Perry also took Fyuse for a test run. == Augmented reality == In September 2016 Fyusion unveiled its platform for creating augmented reality content using ones smartphone. It takes the images from ones smartphone and converts them into 3D holographic images, which one can then view on an AR headset. According to Rusu "by making it easy for people to capture their surroundings on any mobile device, [Fyusion is] revolutionizing the way that people view the world around them" and also states that for "AR to be successful, anyone should be able to create content for it" opposed to the current "small number of content creators and an even smaller number of hardware players". According to him "the applications of [Fyusion's] technology for consumers and businesses are incredibly limitless". The platform uses the company's patented 3D spatio-temporal platform that uses advanced sensor fusion, machine learning and computer vision algorithms and part of the platform is built into the Fyuse app. Before committing to releasing a separate consumer product the company intends to wait until the HoloLens device becomes available to the public. Until then any Fyuse representation created using Fyuse is AR ready and will be able to be shown in HoloLens in the future. == Fyuse - Point of No Return == Fyuse - Point of No Return is a science fiction short advert for Fyuse 3.0 in which Fyuse's digital medium is extrapolated into the future. In the film a woman uses a mini scanning-drone to 3D scan a tree with Fyuse and later recreate it as an augmented reality object at another place.

  Read more →
• 

  Signal transfer function

  The signal transfer function (SiTF) is a measure of the signal output versus the signal input of a system such as an infrared system or sensor. There are many general applications of the SiTF. Specifically, in the field of image analysis, it gives a measure of the noise of an imaging system, and thus yields one assessment of its performance. == SiTF evaluation == In evaluating the SiTF curve, the signal input and signal output are measured differentially; meaning, the differential of the input signal and differential of the output signal are calculated and plotted against each other. An operator, using computer software, defines an arbitrary area, with a given set of data points, within the signal and background regions of the output image of the infrared sensor, i.e. of the unit under test (UUT), (see "Half Moon" image below). The average signal and background are calculated by averaging the data of each arbitrarily defined region. A second order polynomial curve is fitted to the data of each line. Then, the polynomial is subtracted from the average signal and background data to yield the new signal and background. The difference of the new signal and background data is taken to yield the net signal. Finally, the net signal is plotted versus the signal input. The signal input of the UUT is within its own spectral response. (e.g. color-correlated temperature, pixel intensity, etc.). The slope of the linear portion of this curve is then found using the method of least squares. == SiTF curve == The net signal is calculated from the average signal and background, as in signal to noise ratio (imaging)#Calculations. The SiTF curve is then given by the signal output data, (net signal data), plotted against the signal input data (see graph of SiTF to the right). All the data points in the linear region of the SiTF curve can be used in the method of least squares to find a linear approximation. Given n {\displaystyle n\,} data points ( x i , y i ) {\displaystyle (x_{i}\,,y_{i}\,)} a best fit line parameterized as y = m x + b {\displaystyle y=mx+b\,} is given by: m = ∑ x i y i n − ∑ x i n ∑ y i n ∑ x i 2 n − ( ∑ x i n ) 2 b = ∑ y i n − m ∑ x i n {\displaystyle m={\frac {{\frac {\sum x_{i}y_{i}}{n}}-{\frac {\sum x_{i}}{n}}{\frac {\sum y_{i}}{n}}}{{\frac {\sum x_{i}^{2}}{n}}-({\frac {\sum x_{i}}{n}})^{2}}}\qquad \qquad b={\frac {\sum y_{i}}{n}}-m{\frac {\sum x_{i}}{n}}}

  Read more →
• 

  Ordered dithering

  Ordered dithering is any image dithering algorithm which uses a pre-set threshold map tiled across an image. It is commonly used to display a continuous image on a display of smaller color depth. For example, Microsoft Windows uses it in 16-color graphics modes. With the most common "Bayer" threshold map, the algorithm is characterized by noticeable crosshatch patterns in the result. == Threshold map == The algorithm reduces the number of colors by applying a threshold map M to the pixels displayed, causing some pixels to change color, depending on the distance of the original color from the available color entries in the reduced palette. The first threshold maps were designed by hand to minimise the perceptual difference between a grayscale image and its two-bit quantisation for up to a 4x4 matrix. An optimal threshold matrix is one that for any possible quantisation of color has the minimum possible texture so that the greatest impression of the underlying feature comes from the image being quantised. It can be proven that for matrices whose side length is a power of two there is an optimal threshold matrix. The map may be rotated or mirrored without affecting the effectiveness of the algorithm. This threshold map (for sides with length as power of two) is also known as a Bayer matrix or, when unscaled, an index matrix. For threshold maps whose dimensions are a power of two, the map can be generated recursively via: M 2 n = 1 ( 2 n ) 2 [ 4 M n 4 M n + 2 J n 4 M n + 3 J n 4 M n + J n ] = J 2 ⊗ M n + 1 n 2 M 2 ⊗ J n , {\displaystyle \mathbf {M} _{2n}={\frac {1}{(2n)^{2}}}{\begin{bmatrix}4\mathbf {M} _{n}&4\mathbf {M} _{n}+2\mathbf {J} _{n}\\4\mathbf {M} _{n}+3\mathbf {J} _{n}&4\mathbf {M} _{n}+\mathbf {J} _{n}\end{bmatrix}}=\mathbf {J} _{2}\otimes \mathbf {M} _{n}+{\frac {1}{n^{2}}}\mathbf {M} _{2}\otimes \mathbf {J} _{n},} where J n {\displaystyle \mathbf {J} _{n}} are n × n {\displaystyle n\times n} matrices of ones and ⊗ {\displaystyle \otimes } is the Kronecker product. While the metric for texture that Bayer proposed could be used to find optimal matrices for sizes that are not a power of two, such matrices are uncommon as no simple formula for finding them exists, and relatively small matrix sizes frequently give excellent practical results (especially when combined with other modifications to the dithering algorithm). This function can also be expressed using only bit arithmetic: M(i, j) = bit_reverse(bit_interleave(bitwise_xor(i, j), i)) / n ^ 2 == Pre-calculated threshold maps == Rather than storing the threshold map as a matrix of n {\displaystyle n} × n {\displaystyle n} integers from 0 to n 2 {\displaystyle n^{2}} , depending on the exact hardware used to perform the dithering, it may be beneficial to pre-calculate the thresholds of the map into a floating point format, rather than the traditional integer matrix format shown above. For this, the following formula can be used: Mpre(i,j) = Mint(i,j) / n^2 This generates a standard threshold matrix. for the 2×2 map: this creates the pre-calculated map: Additionally, normalizing the values to average out their sum to 0 (as done in the dithering algorithm shown below) can be done during pre-processing as well by subtracting 1⁄2 of the largest value from every value: Mpre(i,j) = Mint(i,j) / n^2 – 0.5 maxValue creating the pre-calculated map: == Algorithm == The ordered dithering algorithm renders the image normally, but for each pixel, it offsets its color value with a corresponding value from the threshold map according to its location, causing the pixel's value to be quantized to a different color if it exceeds the threshold. For most dithering purposes, it is sufficient to simply add the threshold value to every pixel (without performing normalization by subtracting 1⁄2), or equivalently, to compare the pixel's value to the threshold: if the brightness value of a pixel is less than the number in the corresponding cell of the matrix, plot that pixel black, otherwise, plot it white. This lack of normalization slightly increases the average brightness of the image, and causes almost-white pixels to not be dithered. This is not a problem when using a gray scale palette (or any palette where the relative color distances are (nearly) constant), and it is often even desired, since the human eye perceives differences in darker colors more accurately than lighter ones, however, it produces incorrect results especially when using a small or arbitrary palette, so proper normalization should be preferred. In other words, the algorithm performs the following transformation on each color c of every pixel: c ′ = n e a r e s t _ p a l e t t e _ c o l o r ( c + r × ( M ( x mod n , y mod n ) − 1 / 2 ) ) {\displaystyle c'=\mathrm {nearest\_palette\_color} {\mathopen {}}\left(c+r\times \left(M(x{\bmod {n}},y{\bmod {n}})-1/2\right){\mathclose {}}\right)} where M(i, j) is the threshold map on the i-th row and j-th column, c′ is the transformed color, and r is the amount of spread in color space. Assuming an RGB palette with 23N evenly distanced colors where each color (a triple of red, green and blue values) is represented by an octet from 0 to 255, one would typically choose r ≈ 255 N {\textstyle r\approx {\frac {255}{N}}} . (1⁄2 is again the normalizing term.) Because the algorithm operates on single pixels and has no conditional statements, it is very fast and suitable for real-time transformations. Additionally, because the location of the dithering patterns always stays the same relative to the display frame, it is less prone to jitter than error-diffusion methods, making it suitable for animations. Because the patterns are more repetitive than error-diffusion method, an image with ordered dithering compresses better. Ordered dithering is more suitable for line-art graphics as it will result in straighter lines and fewer anomalies. The values read from the threshold map should preferably scale into the same range as the minimal difference between distinct colors in the target palette. Equivalently, the size of the map selected should be equal to or larger than the ratio of source colors to target colors. For example, when quantizing a 24 bpp image to 15 bpp (256 colors per channel to 32 colors per channel), the smallest map one would choose would be 4×2, for the ratio of 8 (256:32). This allows expressing each distinct tone of the input with different dithering patterns. === A variable palette: pattern dithering === == Non-Bayer approaches == The above thresholding matrix approach describes the Bayer family of ordered dithering algorithms. A number of other algorithms are also known; they generally involve changes in the threshold matrix, which changes the distribution of the "noise" introduced by all kinds of dithering (the difference between the original image and the dithered image). === Halftone === Halftone dithering performs a form of clustered dithering, creating a look similar to halftone patterns, using a specially crafted matrix. === Void and cluster === The Void and cluster algorithm uses a pre-generated blue noise as the matrix for the dithering process. The blue noise matrix keeps the Bayer's good high frequency content, but with a more uniform coverage of all the frequencies involved shows a much lower amount of patterning. The "voids-and-cluster" method gets its name from the matrix generation procedure, where a black image with randomly initialized white pixels is gaussian-blurred to find the brightest and darkest parts, corresponding to voids and clusters. After a few swaps have evenly distributed the bright and dark parts, the pixels are numbered by importance. It takes significant computational resources to generate the blue noise matrix: on a modern computer a 64×64 matrix requires a couple seconds using the original algorithm. This algorithm can be extended to make animated dither masks which also consider the axis of time. This is done by running the algorithm in three dimensions and using a kernel which is a product of a two-dimensional gaussian kernel on the XY plane, and a one-dimensional Gaussian kernel on the Z axis. === Simulated Annealing === Simulated annealing can generate dither masks by starting with a flat histogram and swapping values to optimize a loss function. The loss function controls the spectral properties of the mask, allowing it to make blue noise or noise patterns meant to be filtered by specific filters. The algorithm can also be extended over time for animated dither masks with chosen temporal properties.

  Read more →
• 

  Super app

  A super app or super-app (also known as an everything app) is a mobile or web application that can provide multiple services including payment and instant messaging services, effectively becoming an all-encompassing, self-contained, commerce and communication online platform that embraces many aspects of personal and commercial life. Notable examples of super apps include Tencent's WeChat in China, Tata Neu in India, Grab in Southeast Asia and Max in Russia. For end users, a super app is an application that provides a set of core features while also giving access to independently developed miniapps. For app developers, a super app is an application integrated with the capabilities of platforms and ecosystems that allows third-parties to develop and publish miniapps. == History == The super app term was first used to describe WeChat when it combined the instant messaging service with the digital wallet function. Recognition of WeChat as a super app stems from its combination of messaging, payments, e-commerce, and much more within a single application, making it indispensable for many users. WeChat's establishment of the super app model has led companies like Meta to try to build similar applications outside of China. In India, Tata Group has announced that it is currently developing a super app named Tata Neu. Major Indian companies like Paytm, PhonePe, and ITC Maars also have apps in development that might constitute super apps. In Southeast Asia, Grab and Gojek lay claim to the super app classification despite lacking many of the features offered by WeChat. Accordingly, growth-stage companies like Shopee, Traveloka, and AirAsia have also expanded the range of services offered by their respective applications. == Notable examples == === Alipay === Alipay is a third-party mobile and online payment platform established in Hangzhou, China in February 2004 by Alibaba Group and its founder Jack Ma. It operates in association with Ant Group, an affiliate company of the Chinese Alibaba Group. === Gojek === Gojek is an Indonesian on-demand multiservice digital platform and fintech payment super app. Established in Jakarta in 2010, as a call center to connect consumers to courier delivery and two-wheeled ride-hailing services, it launched its mobile app in 2015 with four services: GoRide, GoSend, GoShop, and GoFood, which has since expanded to offer over 20 services. In 2021, it merged with another Indonesian unicorn, Tokopedia, forming the decacorn GoTo Gojek Tokopedia. === Grab === Grab is a Southeast Asian technology company headquartered in Singapore and Indonesia. Founded in 2012 as the MyTeksi app in Kuala Lumpur, Malaysia, it expanded the following year as GrabTaxi, before moving its headquarters to Singapore in 2014 and rebranding officially as Grab. In addition to ride-hailing and transportation services, the company's mobile app also offers food delivery and digital payment services. === Max === Max is a messenger from the Russian company VK, positioned as a super app. The application combines messaging, calls, and channels features with the integration of additional services: payments, miniapps, taxi ordering, deliveries, and other everyday services are available within a single interface. The goal is to unite communication and routine tasks in a unified ecosystem. === Tata Neu === Tata Neu is a multipurpose super app, developed in India by the Tata Group. It is the country's first super app. The app was launched to coincide with the start of a 2022 Indian Premier League cricket match. === WeChat === WeChat is a Chinese multipurpose instant messaging, social media and mobile payment app. First released in 2011, it became the world's largest standalone mobile app in 2018, with over 1 billion monthly active users. WeChat provides text messaging, hold-to-talk voice messaging, broadcast (one-to-many) messaging, video conferencing, video games, the sharing of photographs and videos and location sharing. === X === X is an American social network, originally known as Twitter from its launch through 2023. Prior to his acquisition of the service, new owner Elon Musk stated that he planned for Twitter to become an "everything app" known as "X"; in 2023, the service added an AI chatbot known as "Grok" as well as integrated job search tools known as "X Hiring". In January 2025, X announced its intent to offer a digital wallet service in the future. Later in the year, X revamped its direct messaging system as "Chat". == Criticism == Although apps that fit the super app classification can offer users a wider variety of services in comparison to single-purpose alternatives, internet regulators in regions such as the US and Europe have become more concerned about the overall power of the technology industry and have become more critical of companies developing such apps. In China, WeChat and other local firms have been ordered to open up their platforms to rivals by local regulators. There are also reports that suggest it might be difficult to replicate WeChat's super app model. This stems partly from the peaking of smartphone penetration rates in many regions worldwide, which has led to overcrowded app stores and tighter restrictions on targeted advertising as regulators assert more control over the companies. From a technical viewpoint, single-purpose apps are comparatively faster, more responsive and easier to navigate than super apps, which helps improve the overall user experience. Super-apps are also likelier to store larger amounts of personal data to facilitate the delivery of their services, so users run a greater risk of becoming victims of severe data breaches. In 2020, this unfolded with Tokopedia, which had the data of 91 million of its users stolen and shared by crackers. It has also been noted that a user who loses access to their account or is banned from a super app generally loses access to multiple real-life services and digital applications; the Chinese government has used this approach to penalize people who shared the photos of the Sitong Bridge protest.

  Read more →
• 

  Digital art

  Digital art, or the digital arts, is artistic work that uses digital technology as part of the creative or presentational process. It can also refer to computational art that uses and engages with digital media. Since the 1960s, various names have been used to describe digital art, including computer art, electronic art, multimedia art, and new media art. Digital art includes pieces stored on physical media, such as with digital painting, as well as digital galleries on websites. Digital art also extends to the field of visual computing. == History == In the early 1960s, John Whitney developed the first computer-generated art using mathematical operations. In 1963, Ivan Sutherland invented the first user interactive computer-graphics interface known as Sketchpad. Between 1974 and 1977, Salvador Dalí created two big canvases of Gala Contemplating the Mediterranean Sea which at a distance of 20 meters is transformed into the portrait of Abraham Lincoln (Homage to Rothko) and prints of Lincoln in Dalivision based on a portrait of Abraham Lincoln processed on a computer by Leon Harmon published in "The Recognition of Faces". The technique is similar to what later became known as photographic mosaics. Andy Warhol created digital art using an Amiga where the computer was publicly introduced at the Lincoln Center in July 1985. An image of Debbie Harry was captured in monochrome from a video camera and digitized into a graphics program called ProPaint. Warhol manipulated the image by adding color using flood fills. == Art made for digital media == Artwork that is highly computational, presented through digital media, and explicitly engages with digital technologies are categorized as "art made for digital media". This differs from art using digital tools, which incorporate digital technology in the creation process but may exist outside the digital world. Digital art historian Christiane Paul writes that it "is highly problematic to classify all art that makes use of digital technologies somewhere in its production and dissemination process as digital art since it makes it almost impossible to arrive at any unifying statement about the art form". == Art that uses digital tools == Digital art can be purely computer-generated (such as fractals and algorithmic art) or taken from other sources, such as a scanned photograph or an image drawn using vector graphics software using a mouse or graphics tablet. Artworks are considered digital paintings when created similarly to non-digital paintings but using software on a computer platform and digitally outputting the resulting image as painted on canvas. Despite differing viewpoints on digital technology's impact on the arts, a consensus exists within the digital art community about its significant contribution to expanding the creative domain, i.e., that it has greatly broadened the creative opportunities available to professional and non-professional artists alike. == Art theorists and art historians == Notable art theorists and historians in this field include: Oliver Grau, Jon Ippolito, Christiane Paul, Frank Popper, Jasia Reichardt, Mario Costa, Christine Buci-Glucksmann, Dominique Moulon, Roy Ascott, Catherine Perret, Margot Lovejoy, Edmond Couchot, Tina Rivers Ryan, Fred Forest and Edward A. Shanken. === Digital painting === Digital painting is either a physical painting made with the use of digital electronics and spray paint robotics within the digital art fine art context or pictorial art imagery made with pixels on a computer screen that mimics artworks from the traditional histories of painting and illustration. === Artificial intelligence art === Artists have used artificial intelligence to create artwork since at least the 1960s. Since their design in 2014, some artists have created artwork using a generative adversarial network (GAN), which is a machine learning framework that allows two "algorithms" to compete with each other and iterate. It can be used to generate pictures that have visual effects similar to traditional fine art. The essential idea of image generators is that people can use text descriptions to let AI convert their text into visual picture content. Anyone can turn their language into a painting through a picture generator. == Digital art education == Digital art education has become more common with the advancement of digital hardware and software. From hardware such as graphics tablets, styluses, tablets, 3D scanners, virtual reality headsets, and digital cameras; to software such as digital art software, 3D modeling software, 3D rendering, digital sculpting, 2D graphics software, digital painting, 3D terrain generation, 2D animation software, 3D animation software, raster graphics editors, vector graphics editors, mathematical art software, and video editing software. == Scholarship and archives == In addition to the creation of original art, research methods that utilize AI have been generated to quantitatively analyze digital art collections. This has been made possible due to the large-scale digitization of artwork in the past few decades. Although the main goal of digitization was to allow for accessibility and exploration of these collections, the use of AI in analyzing them has brought about new research perspectives. Two computational methods, close reading and distant viewing, are the typical approaches used to analyze digitized art. Close reading focuses on specific visual aspects of one piece. Some tasks performed by machines in close reading methods include computational artist authentication and analysis of brushstrokes or texture properties. In contrast, through distant viewing methods, the similarity across an entire collection for a specific feature can be statistically visualized. Common tasks relating to this method include automatic classification, object detection, multimodal tasks, knowledge discovery in art history, and computational aesthetics. Whereas distant viewing includes the analysis of large collections, close reading involves one piece of artwork. Whilst 2D and 3D digital art is beneficial as it allows the preservation of history that would otherwise have been destroyed by events like natural disasters and war, there is the issue of who should own these 3D scans – i.e., who should own the digital copyrights. === Computer demos === Computer demos are based on computer programs, usually non-interactive. It produces audiovisual presentations. They are a novel form of art, which emerged as a consequence of the home computer revolution in the early 1980s. In the classification of digital art, they can be best described as real-time procedurally generated animated audio-visuals. This form of art does not concentrate only on the aesthetics of the final presentation, but also on the complexities and skills involved in creating the presentation. As such, it can be fully enjoyed only by persons with a relatively high knowledge level of relevant computer technologies. An example is that, as said by Hua Jin and Jie Yang, Using computer-aided design software to present the class content in art design teaching," is not to advocate computer-aided design instead of hand-drawn performance, but to make it serve the profession earlier through a more reasonable course arrangement." On the other hand, many of the created pieces of art are primarily aesthetic or amusing, and those can be enjoyed by the general public. === Digital installation art === Digital installation art constitutes a broad field of artistic practices and a variety of forms. Some resemble video installations, especially large-scale works involving projections and live video capture. By using projection techniques that enhance an audience's impression of sensory envelopment, many digital installations attempt to create immersive environments. While others go even further and attempt to facilitate a complete immersion in virtual realms. This type of installation is generally site-specific, scalable, and without fixed dimensionality, meaning it can be reconfigured to accommodate different presentation spaces. Scott Snibbe's "Boundary Functions" is an example of augmented reality digital installation art, which responds to people who enter the installation by drawing lines between people, indicating their personal space.Noah Wardrip-Fruin's "Screen"(2003) utilizes a Cave Automatic Virtual Environment (CAVE) to create an interactive, text-based digital experience that engages the viewer in a multi-sensory interaction. === Internet art and net.art === Internet art is digital art that uses the specific characteristics of the Internet and is exhibited on the Internet. The term "internet art" is included by "net art" for which artists assume that network will be refreshed through history. So the term "post-internet art" is used to exclude artworks outside of the internet media. A representative example is Protocols for Achievements, which is a digital photo frame that confronts the aestheti

  Read more →