AI Face Fixer

AI Face Fixer — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • AlphaChip (controversy)

    AlphaChip (controversy)

    The AlphaChip controversy refers to a series of public, scholarly, and legal disputes surrounding a 2021 Nature paper by Google-affiliated researchers. The paper describes an approach to macro placement, a stage of chip floorplanning, based on reinforcement learning (RL), a machine learning method in which a system iteratively improves its decisions by optimizing performance-based reward signals. The primary technical question is whether the new techniques are better than existing (non-AI) techniques. Both internal Google studies and external attempts to replicate the algorithm have failed to show the claimed benefits. No head-to-head comparison is available because the data used in the paper is proprietary, and Google has not released any results from running its algorithm on public benchmarks. This has resulted in considerable skepticism over the paper's claims. In addition, the inability of others (both inside and outside of Google) to replicate the claimed results have sparked concerns about the paper’s methodology, reproducibility, and scientific integrity. The lead researchers of the Nature paper were affiliated with Google Brain, which became part of Google DeepMind, and later spun off into the company Ricursive. == Motivation for research: Macro placement in chip layout == Chip design for modern integrated circuits is a complex, expert-driven process that relies on electronic design automation. It determines the performance of the final chip, and takes weeks or months to complete. Advances that produce better designs, or complete the process faster, are commercially and academically significant. Macro placement is a step during chip design that determines the locations of large circuit components (macros) within a chip. It is followed by detailed placement, which places the far more numerous but much smaller standard cells. Alternatively, mixed-size placement simultaneously places both large macros and millions of small cells, requiring algorithms to handle objects that differ by several orders of magnitude in area and mobility. The number of macros per circuit typically ranges from several to thousands. Wiring must be performed after placement, and the details of this wiring strongly influence the power, performance, and area (PPA) of the completed chip. The full wiring calculation is very resource intensive, so placement tools typically use a proxy cost, a simplified objective function used to guide the placement algorithm during training and evaluation. The faithfulness of the chosen proxy cost to the final objective cost is a critical aspect of placer performance. === State of the art as of 2021 === Chips have been designed since the 1960s, so there were many existing methods as of 2021. Available options included manual design, academic tools, and commercial offerings. Academic methods include combinatorial optimization techniques such as simulated annealing, analytical placement, hierarchical heuristics, and as of 2019 reinforcement learning and broader machine learning techniques.. Existing (non-AI) academic tools for solving the same problem include APlace, NTUplace3, ePlace, RePlace, and DREAMPlace. Commercial EDA vendors also offered automated software tools for floorplanning and mixed-size placement. For instance, as of 2019 Cadence’s Innovus implementation software offered a Concurrent Macro Placer (CMP) feature to automatically place large blocks and standard cells. == The 2021 Nature paper and its claims == In 2021, Nature published a paper under the title “A graph‑placement methodology for fast chip design” co‑authored by 21 Google-affiliated researchers. The paper reported that an RL agent could generate macro placements for integrated circuits "in under six hours" and achieve improvements over human-designed layouts in power, timing performance, and area (PPA), standard chip-quality metrics referring respectively to energy consumption, chip operating speed, and silicon footprint (evaluated after wire routing). It introduced a sequential macro placement algorithm in which macros are placed one at a time instead of optimizing their locations concurrently. At each step, the algorithm selects a location for a single macro on a discretized chip canvas, conditioning its decision on the placements of previously placed macros. This sequential formulation converts macro placement into a long-horizon decision process in which early placement choices constrain later ones. After macro placement, force-directed placement is applied to place standard cells connected to the macros. Deep reinforcement learning is used to train a policy network to place macros by maximizing a reward that reflects final placement quality (for example, wirelength and congestion). Policy learning occurs during self‑play for one or multiple circuit designs. Further placement optimizations refine the overall layout by balancing wirelength, density, and overlap constraints, while treating the macro locations produced by the RL policy as fixed obstacles. The approach relies on pre-training, in which the RL model is first trained on a corpus of prior designs (twenty in the Nature paper) to learn general placement patterns before being fine-tuned on a specific chip. Circuit examples used in the study were parts of proprietary Google TPU designs, called blocks (or floorplan partitions). The paper reported results on five blocks and described the approach as generalizable across chip designs. == Controversy == Soon after the paper's publication, controversy arose over whether the claims were true, whether they were sufficiently proven, and whether academic standards were followed. These controversies arose both within Google and among external academic experts. === Internal dispute at Google and legal proceedings === In 2022, Satrajit Chatterjee, a Google engineer involved in reviewing the AlphaChip work, raised concerns internally and drafted an alternative analysis, (Stronger Baselines) arguing that established methods outperformed the RL approach under fair comparison. In March 2022, Google declined to publish this analysis and terminated Chatterjee's employment. Chatterjee filed a wrongful dismissal lawsuit, alleging that representations related to the AlphaChip research involved fraud and scientific misconduct. According to court documents, Chatterjee's study was conducted "in the context of a large potential Google Cloud deal". He noted that it "would have been unethical to imply that we had revolutionary technology when our tests showed otherwise" and claimed Google was deliberately withholding material information. Furthermore, the committee that reviewed his paper and disapproved its publication was allegedly chaired by subordinates of Jeff Dean, a senior co-author of the Nature paper. Google’s subsequent motion to dismiss was denied, holding that Chatterjee had plausibly alleged retaliation for refusing to engage in conduct he believed would violate state or federal law. === External controversy === The external questions can be summarized in four main points: (a) Are the claims supported by the evidence provided? (b) Did the paper provide enough information to allow the results to be independently reproduced and verified? If so, are the results an improvement over existing academic and commercial tools? (c) Were the comparisons in the paper done fairly and with full disclosure? (d) Were academic standards followed? Each of these is discussed below. ==== Are the claims supported by the evidence provided? ==== The Nature paper described the reduction in design-process time as going from "days or weeks" to "hours", but did not provide per-design time breakdowns or specify the number of engineers, their level of expertise, or the baseline tools and workflow against which this comparison was made. It was also unclear whether the "days or weeks" baseline included time spent on other tasks such as functional design changes. The paper also evaluated the method on fewer benchmarks (five) than is common in the field, and showed mixed results across different evaluation goals While the approach was described as improving circuit area, this claim seems unsupported, as the RL optimization did not alter the overall circuit area, as it adjusted only the locations of fixed-shape non-overlapping circuit components within a fixed rectangular layout boundary. ==== Comparison with existing methods, and replicating the algorithm ==== Because macro placement is largely geometric and its fundamental algorithms are not tied to a specific process node, competing approaches can be evaluated on public benchmarks (tests) across technologies, rather than primarily on proprietary internal designs. This is standard procedure when comparing academic placers, see . In contrast, Google has only reported results only on internal proprietary designs, and as of 2026 has not offered comparisons with prior methods on common benchmarks. Researchers at the University of Califor

    Read more →
  • Social media age verification laws in the United States

    Social media age verification laws in the United States

    In the United States, age verification laws for social media are ostensibly designed to limit young people's access to content deemed problematic such as pornography and to reduce the negative impact of social media on the mental health and well-being of children and adolescents. The purpose and effects of such laws are highly contested. Critics say that these laws suppress free speech by removing online anonymity. They have also stated the laws undermine safety, even for children, by increasing the exposure of user data to breaches, many sites require government IDs and biometric data (such as photographs), often transmitted or secured insecurely and without encryption. They also note that the measures are easily circumvented with VPNs, prompting some states such as Michigan and Wisconsin to propose legislation banning VPNs. == Laws == Many state legislatures have considered or enacted legislation pertaining to young people and social media. In 2022, California passed the California Age-Appropriate Design Code Act (AB 2273) requiring websites that are likely to be used by minors to estimate visitors' ages. On March 23, 2023, Utah Governor Spencer Cox signed SB 152 and HB 311, collectively known as the Utah Social Media Regulation Act, which requires age verification; if a user is under 18, they have to get parental consent before making an account on any social media platform. Few laws have gone into effect partially due to court challenges. === Arkansas === On April 11, 2023, Arkansas enacted SB 396, the Social Media Safety Act. The law requires certain social media companies that make over $100 million per year to verify the age of new users using a third party, and to obtain parental consent for users under 18. It excludes social media companies that allow a user to generate short video clips as well as games. The law was set to go in effect in September 2023. On June 29, 2023, NetChoice sued the Attorney General of Arkansas Tim Griffin in The Western District Court of Arkansas to block enforcement of the law, supported by the American Civil Liberties Union and the Electronic Frontier Foundation (EFF). On July 7, 2023, NetChoice filed a motion for a preliminary injunction to block enforcement of the law. On July 27, Griffin and Tony Allen filed briefs in opposition to the preliminary injunction. The preliminary injunction was granted by Judge Timothy L. Brooks on August 31, reasoning that the law was too vague, that NetChoice's members will suffer irreparable harm if the act goes into effect, and that age restrictions were ineffective. === California === ==== Digital Age Assurance Act (AB 1043) ==== On October 13, 2025, Gavin Newsom signed the Digital Age Assurance Act into law, which requires operating system providers to estimate the age of a user and into 4 age categories: Under 13 13 - 15 16 - 17 18 and over It comes into force on January 1, 2027. ==== California Age-Appropriate Design Code (AB 2273) ==== On September 15, 2022, California enacted AB 2273, the California Age-Appropriate Design Code Act. Its most controversial provisions required online services that are likely to be used by those under 18 to estimate the age of child users with a "reasonable level of certainty". It also required these services to file Data Protection Impact Assessments (DPIAs) certifying whether an online product, service, or feature could harm children, including by exposing them to (potentially) harmful content. The law does not define harmful content. Before the law took effect, EFF sent a veto request to Newsom. On December 14, 2022, NetChoice sued. On September 18, 2023, Federal Judge Beth Labson Freeman granted a preliminary injunction. The 9th Circuit on August 16, 2024, affirmed the injunction against the DPIA section of the law and sent the rest back, because the argument in the 9th circuit was mainly focused on the DPIA. ==== Protecting Our Kids from Social Media Addiction Act (SB 976) ==== On September 20, 2024, California enacted SB 976, Protecting Our Kids from Social Media Addiction. The law requires online platforms to exclude those under 18 from "addictive" feeds unless parental consent is given. It requires online platforms to not send notifications to someone under 18 between 12:00 AM and 6:00 AM without parental consent or between 8:00 am – 3:00 pm without parental consent from September through May (the law does not define what a "notification" is). The law took effect on January 1, 2025, with age verification required as of December 31, 2026. On November 12, NetChoice sued in the Northern District and before Judge Edward John Davila. On December 31, the judge blocked the sections of SB 976 that required time-of-day restrictions. He also enjoined requirements to report on the number of minor users as well as the number of parental assents to access an addictive feed. He did not block the age assurance requirement or blocking minors from seeing addictive feeds without parental consent. His reasoning was that age assurance that runs in the background does not restrict adult access to speech and that regulating feeds does not violate the first amendment because it was content neutral and did not remove any content. On January 1, 2025, NetChoice filed a motion to fully block the law as part of its appeal to the Ninth Circuit. NetChoice claimed that the court erred in its reading of Supreme Court case Moody v. NetChoice by mainly focusing on the concurring opinions and not the deciding opinion. The same day Davila decreed that California's response to NetChoice was due by 11:59 pm. California responded the same day to NetChoice's motion, claiming that the court should not block the full law, claiming that NetChoice had misread Moody v. NetChoice and that NetChoice's members would not likely face any harm from the act because members such as X (formerly Twitter) already offer their members feeds that were not personalized. On January 2, Davila granted NetChoice's motion to block the full law during the appeals process by delaying the effective date of the law from January 1, 2025, to February 1, 2025. That day NetChoice appealed the case to the Ninth Circuit Court of Appeals. === Florida === On January 5, 2024, Tyler Sirois introduced HB 1, which would ban anyone under 16 from using any social media platform and would require platforms to verify the age of users. After the bill passed, the American Civil Liberties Union (ACLU) published a blog post opposing the bill for violating the rights of minors and adults. The bill was vetoed by Governor Ron DeSantis on March 1, 2024, claiming that the State Legislature was going to enact a better alternative. HB 3 then decreased the minimum age from 16 to 14, allowing minors aged 14 and 15 to make social media accounts with parental consent. Florida enacted it on March 25, 2024, and took effect on January 1, 2025. A surge of 1,150% in VPN demand in Florida was detected after the law took effect. VPN services provide the ability to circumvent the law. On October 28, 2024, NetChoice and Computer and Communications Industry Association sued. The Judge is Chief Judge Mark E. Walker. On February 28, 2025, arguments were heard on the motion for a preliminary injunction. Walker seemed skeptical of Florida's argument that the law did not violate the first amendment and said the State would have a hard time to justify a complete ban of youth under 14 from social media. On March 13, Walker denied the motion for a preliminary injunction because the plaintiffs had not proven that at least one of their members had at least 10 percent of their users under 16 use their platform for at least 2 hours per day. Plaintiffs filed an amended complaint and a renewed motion for a preliminary injunction which was granted on June 3, for failing First Amendment Intermediate scrutiny. The injunction left in force the provision that allowed parents to request termination of their child's social media account. === Georgia === On April 23, 2024, Georgia enacted SB 351, which became Act 463. Act 463 requires platforms to verify the age of users of social media platforms and require users under 16 years of age to have parental consent before creating an account. It also requires schools to ban all social media platforms, including YouTube. Before the law was signed NetChoice sent a veto request to Kemp claiming the law was unconstitutional and was bad policy. After the bill was enacted, ACLU and NetChoice criticized the bill. NetChoice sued two months before the law's effective date. The Judge is Amy Totenberg. the suit claims that the law violates the First Amendment and Fourteenth Amendments. === Louisiana === ==== Secure Online Child Interaction and Age Limitation Act (SB 162) ==== On June 28, 2023, Louisiana enacted SB 162, the Secure Online Child Interaction and Age Limitation Act. It requires social media platforms to verify user age and get parental consent for users under 16, prohibits account holders under 1

    Read more →
  • Affordable affluence

    Affordable affluence

    Affordable affluence refers to a cultural phenomenon where consumers use accessible luxury goods and lifestyles to project status and align themselves with a higher social class, without requiring substantial wealth. This concept is embodied by brands such as Aritzia and Erewhon, which position themselves as offering high-end, trendy, or health-conscious products that are relatively accessible to the average consumer. A related concept is quiet luxury, where the ultra-wealthy signal wealth through subtle means. Quiet luxury emphasizes the widening gap between the ultra-wealthy and the general public, whereas accessible affluence provides a way for the general public to indulge in the lifestyle of the ultra-wealthy. == Origin of the term == An early use of the phrase in this context in a 2023 article in The Cut called "Meet the People Working 3 Jobs to Afford Erewhon." One of the interviewees used Erewhon as an archetype of affordable affluence. It was described as “a way for regular people to position themselves adjacent to the upper class.” == Background and description == The phenomenon arises due to an individual's desire to showcase status. For years, companies have strategized how to target the average consumers by providing a product that signals an elevated social status. For instance, Aritzia partnered with celebrities and micro-influencers to make it an aspirational brand at an affordable cost. Erewhon similarly has allowed middle class consumers to subtly signal a higher degree of perceived wealth by purchasing higher priced, but still attainable items. It has allowed middle-class individuals to feel as though they are part of an exclusive culture. This phenomenon has been seen particularly with Gen Z and Millennials in the setting of financial hardships in the 2020s. Affordable affluence is an example of the lipstick effect. Because traditional status symbols such as expensive cars became relatively more unattainable, posting clips on social media that showcase affordable affluence become an alternative status symbol. Particularly with food, the perception has evolved from a necessity to a luxury. A McKinsey & Company report demonstrated that these generations place a higher importance on groceries than restaurants, travel, and beauty/fashion.

    Read more →
  • WebAR

    WebAR

    WebAR, previously known as the Augmented Web, is a web technology that allows for augmented reality functionality within a web browser. It is a combination of HTML, Web Audio, WebGL, and WebRTC. From 2020s more known as web-based Augmented Reality or WebAR, which is about the use of augmented reality elements in browsers. It was the focus of a Birds of a Feather meeting at ISMAR2012 and is now the focus of the W3C Augmented Web Community Group. == Features == Browser augmented reality for smartphones has a number of features that distinguish it from similar content in special apps. No special applications are needed for Web AR. A regular browser is enough. And it can run to a certain extent on most browsers. It is easy to set up marketing analytics. By connecting the website to services that collect statistics, it is convenient to receive geographic coordinates, demographic characteristics and other information about users. Ability to add a CTA button. It is extremely important for marketing websites to place it so that the user can add contact information or place an order after considering the offer. Rich content. Browser augmented reality for tablets and smartphones supports 2D and 3D graphics, animation and other formats. Image marker tracking. If a QR code is selected as an activator for an AR element or just a picture on a flat surface, the device can easily read it. Various activation ways. Web AR can be marker and markerless, attached to geolocation, it can also be hidden in a direct link. Game content. Even simple games with simple mechanics, transferred into augmented reality, can delight the website visitor. Cross-platform. You can view content that complements our usual reality using any modern smartphone model. == Limitations == Performance is simply better on an app, where there's capacity for more memory and programs are executed in native code therefore it provides better visuals, better animations and better interactivity than in WebAR experience. A web page can only have access to certain parts of the device you're using, whereas a native app can access all of a device's capabilities. Meaning if you want the convenience of WebAR, you need to be thinking of simple but effective experiences instead. Compatibility. Not every mobile device has the required HW for AR performance. == Implementation == Browser support is evolving quickly and can best be monitored using services like Can I Use. Since this is a web application, there are platforms that support the creation of WebAR that are similar to normal web development platforms. Something which enables the creation of 3D assets and environments using a web framework that looks similar to HTML. Applications (like for example – A-Frame) are supported by 8th Wall, which is by the end of 2021 the leading SLAM tracking SDK for WebAR on the market. WebAR is currently limited mostly by the browser – so how much the technology will develop rather depends on what the big players like Google and Apple develop. For iOS device users, Apple developed AR Quick Look, an extension that enables users to use ARKit on the web. For Android devices your browser should support WebXR, an API that allows users to view AR/VR content without installing extra plugins or software, and have ARCore installed. There are many tools and frameworks that help developers in expanding the immersive web with WebAR. For example, AR.js is an open-source library for Augmented Reality on the Web for improved WebAR performance on smartphones that includes marker-based technology (simplified QR-codes) and location-based AR. Apple at the WWDC Conference 2018, announced that it has developed a new file format, working together with Pixar, called USDZ Universal. This file will allow developers to create 3d models for augmented reality. USDZ format was created by Apple together with Pixar Animation Studio and allowed developers to create 3D models for AR. == Industries == Where WebAR can be used from virtual guides, which can help students navigate through campus to virtual film posters: E-commerce and Advertising. Education. Entertainment. Business. Fashion. == Examples == Promotion of Spider-Man: Into the Spider-Verse for which 8th Wall developed the AR platform that made this interactive WebAR promoting the Sony animated smash hit. Everyone can invite teenage Spiderman/Miles Morales into their homes for some one-on-one interaction, take pictures and share the experience with friends. Sony Pictures included the QR code to launch this WebAR site in print promotions for the movie. Also in 2017 the advertising of Jumanji: The Next Level gave us the world's first WebAR activation with usage of Amazon Lex to power voice interaction (the same tool that powers Amazon Alexa), the experience sends users on a wild 3D adventure into the world of Jumanji! This was a collaboration between Sony Pictures and Trigger - The Mixed Reality Agency. The WebAR technology is powered by 8th Wall. And you can check it via the link to the official YouTube recording of the experience. RPR & Microsoft's Holographic Retail Platform, where Web AR brings a new twist to online shopping by allowing users to interact with 3D holographic images of models right from their smartphones' browsers. This experience is designed to increase buyer confidence and reduce clothing returns, which are two of the greatest challenges to purchasing clothing online. Digital Porsche Brand Academy was developed by the Team of svarmony Technologies GmbH and it is the first-to-market training tool that uses augmented reality to provide Porsche employees an immersive experience learning about the company's history and values. The star of this WebAR experience is an animated avatar that serves as a tour guide for Porsche's past, present, and future. Employees can explore realistically animated Porsche-locations, take a ride in a virtual Porsche, help assemble a car, and test Porsche knowledge via a quiz. The Digital Porsche Brand Academy is a great starter kit for employees to establish a relationship with the brand and align with the company's plans. == Future == By freeing smartphone users from having to install numerous apps, WebAR can make Augmented Reality far more accessible for them and more beneficial for business. The further development of the WebAR can be accelerated by the widespread social acceptance of the headsets that can give the whole other level of AR experience. This means instant access to the information when the contextually relevant content is appearing as the person's real background is changing.

    Read more →
  • Sprite (computer graphics)

    Sprite (computer graphics)

    In computer graphics, a sprite is a two-dimensional bitmap that is integrated into a larger scene, most often in a 2D video game. Originally, the term sprite referred to fixed-sized objects composited together, by hardware, with a background. Use of the term has since become more general. Systems with hardware sprites include arcade video games of the 1970s and 1980s; game consoles including as the Atari VCS (1977), ColecoVision (1982), Famicom (1983), Genesis/Mega Drive (1988); and home computers such as the TI-99/4 (1979), Atari 8-bit computers (1979), Commodore 64 (1982), MSX (1983), Amiga (1985), and X68000 (1987). Hardware varies in the number of sprites supported, the size and colors of each sprite, and special effects such as scaling or reporting pixel-precise overlap. Hardware composition of sprites occurs as each scan line is prepared for the video output device, such as a cathode-ray tube, without involvement of the main CPU and without the need for a full-screen frame buffer. Sprites can be positioned or altered by setting attributes used during the hardware composition process. The number of sprites which can be displayed per scan line is often lower than the total number of sprites a system supports. For example, the Texas Instruments TMS9918 chip supports 32 sprites, but only four can appear on the same scan line. The CPUs in modern computers, video game consoles, and mobile devices are fast enough that bitmaps can be drawn into a frame buffer without special hardware assistance. Beyond that, GPUs can render vast numbers of scaled, rotated, anti-aliased, partially translucent, very high resolution images in parallel with the CPU. == Etymology == According to Karl Guttag, one of two engineers for the 1979 Texas Instruments TMS9918 video display processor, this use of the word sprite came from David Ackley, a manager at TI. It was also used by Danny Hillis at Texas Instruments in the late 1970s. The term was derived from the fact that sprites "float" on top of the background image without overwriting it, much like a ghost or mythological sprite. Some hardware manufacturers used different terms, especially before sprite became common: Player/Missile Graphics was a term used by Atari, Inc. for hardware sprites in the Atari 8-bit computers (1979) and Atari 5200 console (1982). The term reflects the use for both characters ("players") and smaller associated objects ("missiles") that share the same color. The earlier Atari Video Computer System and some Atari arcade games used player, missile, and ball. Stamp was used in some arcade hardware in the early 1980s, including Ms. Pac-Man. Movable Object Block, or MOB, was used in MOS Technology's graphics chip literature. Commodore, the main user of MOS chips and the owner of MOS for most of the chip maker's lifetime, instead used the term sprite for the Commodore 64. OBJs (short for objects) is used in the developer manuals for the NES, Super NES, and Game Boy. The region of video RAM used to store sprite attributes and coordinates is called OAM (Object Attribute Memory). This also applies to the Game Boy Advance and Nintendo DS. == History == === Arcade video games === The use of sprites originated with arcade video games. Nolan Bushnell came up with the original concept when he developed the first arcade video game, Computer Space (1971). Technical limitations made it difficult to adapt the early mainframe game Spacewar! (1962), which performed an entire screen refresh for every little movement, so he came up with a solution to the problem: controlling each individual game element with a dedicated transistor. The rockets were essentially hardwired bitmaps that moved around the screen independently of the background, an important innovation for producing screen images more efficiently and providing the basis for sprite graphics. The earliest video games to represent player characters as human player sprites were arcade sports video games, beginning with Taito's TV Basketball, released in April 1974 and licensed to Midway Manufacturing for release in North America. Designed by Tomohiro Nishikado, he wanted to move beyond simple Pong-style rectangles to character graphics, by rearranging the rectangle shapes into objects that look like basketball players and basketball hoops. Ramtek released another sports video game in October 1974, Baseball, which similarly displayed human-like characters. The Namco Galaxian arcade system board, for the 1979 arcade game Galaxian, displays animated, multi-colored sprites over a scrolling background. It became the basis for Nintendo's Radar Scope and Donkey Kong arcade hardware and home consoles such as the Nintendo Entertainment System. According to Steve Golson from General Computer Corporation, the term "stamp" was used instead of "sprite" at the time. === Home systems === Signetics devised the first chips capable of generating sprite graphics (referred to as objects by Signetics) for home systems. The Signetics 2636 video processors were first used in the 1978 1292 Advanced Programmable Video System and later in the 1979 Elektor TV Games Computer. The Atari VCS, released in 1977, has a hardware sprite implementation where five graphical objects can be moved independently of the game playfield. The term sprite was not in use at the time. The VCS's sprites are called movable objects in the programming manual, further identified as two players, two missiles, and one ball. These each consist of a single row of pixels that are displayed on a scan line. To produce a two-dimensional shape, the sprite's single-row bitmap is altered by software from one scan line to the next. The 1979 Atari 400 and 800 home computers have similar, but more elaborate, circuitry capable of moving eight single-color objects per scan line: four 8-bit wide players and four 2-bit wide missiles. Each is the full height of the display—a long, thin strip. DMA from a table in memory automatically sets the graphics pattern registers for each scan line. Hardware registers control the horizontal position of each player and missile. Vertical motion is achieved by moving the bitmap data within a player or missile's strip. The feature was called player/missile graphics by Atari. Texas Instruments developed the TMS9918 chip with sprite support for its 1979 TI-99/4 home computer. An updated version is used in the 1981 TI-99/4A. === In 2.5D and 3D games === Sprites remained popular with the rise of 2.5D games (those which recreate a 3D game space from a 2D map) in the late 1980s and early 1990s. A technique called billboarding allows 2.5D games to keep onscreen sprites rotated toward the player view at all times. Some 2.5D games, such as 1993's Doom, allow the same entity to be represented by different sprites depending on its rotation relative to the viewer, furthering the illusion of 3D. Fully 3D games usually present world objects as 3D models, but sprites are supported in some 3D game engines, such as GoldSrc and Unreal, and may be billboarded or locked to fixed orientations. Sprites remain useful for small details, particle effects, and other applications where the lack of a third dimension is not a major detriment. == Systems with hardware sprites == These are base hardware specs and do not include additional programming techniques, such as using raster interrupts to repurpose sprites mid-frame.

    Read more →
  • Access-independent services

    Access-independent services

    Access-independent service (AIS) is a service concept in which a service does not depend on guaranteed access network cooperation for service delivery. Telecommunications industry analyst Dean Bubley first used the term in a report on Telco-OTT in February 2012. Traditionally, most telecom company or internet service provider services are access-dependent, because they rely heavily on guaranteed access cooperation on the network the service is delivered over. For instance, traditional IP-based TV service (IPTV) delivered by a telecom company is generally a managed service. This means that IPTV service assumes the IPTV service provider has control over the access network that the IPTV service is delivered over, and network quality of service (QoS) guarantees are available for IPTV service delivery. As a result, the reach of a telecom company's IPTV service is generally restricted by the reach of the telecom company's access network. In contrast, services offered by non-traditional video content delivery service providers such as Netflix, Hulu, and Amazon Video are considered access-independent services. Netflix's video content streaming service, for example, dynamically adapts to network conditions in real-time to strive for the best overall quality of experience (QoE) and does not assume guaranteed cooperation from the underlying IP network, such as QoS. As a result, without considering content rights and different countries' government restrictions, the reach of Netflix's video content streaming service is, in theory, the reach of the Internet. Skype is another example of AIS, because Skype offers an IP-based telephony service over the Internet without depending on IP network cooperation guarantees other than basic IP network connectivity. In the context of telecom service delivery, the concept of access independent services is also commonly described by the term "over-the-top" (OTT) services. OTT service providers such as but not limited to Facebook, WeChat, and Netflix generally do not own or directly manage any wide-area access network to begin with, so they design their services for overall quality of experience, with no assumptions on guaranteed access network cooperation.

    Read more →
  • Web3D

    Web3D

    Web3D, also called 3D Web, is a group of technologies to display and navigate websites using 3D computer graphics. These technologies enable applications such as online games, virtual reality experiences, interactive product demonstrations, and 3D data visualization directly within web browsers. The emergence of Web3D dates back to 1994, with the advent of VRML, a file format designed to store and display 3D graphical data on the World Wide Web. Modern Web3D is primarily powered by WebGL, a JavaScript API that enables hardware-accelerated 3D graphics rendering in web browsers without requiring plug-ins. == Pre-WebGL era == The emergence of Web3D dates back to 1994, with the advent of VRML, a file format designed to store and display 3D graphical data on the World Wide Web. In October 1995, at Internet World, Template Graphics Software demonstrated a 3D/VRML plug-in for the beta release of Netscape 2.0 by Netscape Communications. The Web3D Consortium was formed to further the collective development of the format. VRML and its successor, X3D, have been accepted as international standards by the International Organization for Standardization and the International Electrotechnical Commission. The main drawback of the technology was the requirement to use third-party browser plug-ins to perform 3D rendering, which slowed the adoption of the standard. Between 2000 and 2010, one of these plug-ins, Adobe Flash Player, was widely installed on desktop computers and was used to display interactive web pages and online games and to play video and audio content. Several Flash-based frameworks appeared that used software rendering and ActionScript 3 to perform 3D computations such as transformations, lighting, and texturing. Most notable among them were Papervision3D and Away3D. Eventually, Adobe developed Stage3D, an API for rendering interactive 3D graphics with GPU-acceleration for its Flash player and AIR products, which was adopted by software vendors. In 2009, an open-source 3D web technology called O3D was introduced by Google. It also required a browser plug-in, but contrary to Flash/Stage3D, was based on JavaScript API. O3D was geared not only for games but also for advertisements, 3D model viewers, product demos, simulations, engineering applications, control and monitoring systems. == WebGL and glTF == WebGL (short for "Web Graphics Library") evolved out of the Canvas 3D experiments started by Vladimir Vukićević at Mozilla Foundation. Vukićević first demonstrated a Canvas 3D prototype in 2006. By the end of 2007, both Mozilla and Opera had made their own separate implementations. In early 2009, the nonprofit technology consortium Khronos Group started the WebGL Working Group, with initial participation from Apple, Google, Mozilla, Opera, and others. Version 1.0 of the WebGL specification was released in March 2011. Major advantages of the new technology include conformity with web standards and near-native 3D performance without the use of any browser plug-ins. Since WebGL is based on OpenGL ES, it works on mobile devices without any additional abstraction layers. For other platforms, WebGL implementations leverage ANGLE to translate OpenGL ES calls to DirectX, OpenGL, or Vulkan API calls. Among notable WebGL frameworks are A-Frame, which uses HTML-based markup for building virtual reality experiences; PlayCanvas, an open-source engine alongside a proprietary cloud-hosted creation platform for building browser games; Three.js, an MIT-licensed framework used to create demoscene from the early 2000s; Unity, which obtained a WebGL back-end in version 5; and Verge3D, which integrates with Blender, 3ds Max, and Maya to create 3D web content. With the rapid adoption of WebGL, a new problem arose—the lack of a 3D file format optimized for the Web. This issue was addressed by glTF, a format that was conceived in 2012 by members of the COLLADA working group. At SIGGRAPH 2012, Khronos presented a demo of glTF, which was then called WebGL Transmissions Format (WebGL TF). On 19 October 2015, the glTF 1.0 specification was released. Version 2.0 glTF uses a physically based rendering material model, proposed by Fraunhofer. Other upgrades include sparse accessors and morph targets for techniques such as facial animation, and schema tweaks and breaking changes for corner cases or performance, such as replacing top-level glTF object properties with arrays for faster index-based access. == Future == "WebGPU" is the working name for a potential web standard and JavaScript API for accelerated graphics and computing, aiming to provide "modern 3D graphics and computation capabilities". It is developed by the W3C "GPU for the Web" Community Group, with engineers from Apple, Mozilla, Microsoft, and Google, among others. WebGPU will not be based on any existing 3D API and will use Rust-like syntax for shaders.

    Read more →
  • Over-the-top media services in India

    Over-the-top media services in India

    As per Govt of India, there are currently about 57 providers of over-the-top media services (OTT) in India, which distribute streaming media or video on demand over the Internet. == History and growth == The first dependent Indian OTT platform was BIGFlix, launched by Reliance Entertainment in 2008. In 2010 Digivive launched India's first OTT mobile app called nexGTv, which provides access to both live TV and on–demand content. nexGTV was the first app to live–stream Indian Premier League matches on smart phones and did so during 2013 and 2014. The livestream of the IPL since 2015, when rights were won, played an important role in the growth of another OTT platform, Hotstar (now JioHotstar) in India. OTT Platforms gained significant momentum in India when both DittoTV (Zee) and Sony Liv were launched in the Indian market around 2013. Following the initial push of Regional OTT platforms like Aha, Hoichoi, Sun NXT, Planet Marathi, Chaupal & MX Player. The Indian OTT industry saw rapid transformation with the entry of global OTT companies such as Netflix and Amazon Prime Video into the Indian market in 2016. Replacement of this competition with global enterprises caused local rivals to innovate in both region and hyper-regional content. === Hotstar === Hotstar (now JioHotstar) is the most subscribed–to OTT platform in India, owned by JioStar as of February 2025, with around 500 million active users and over 650 million downloads. According to Hotstar's India Watch Report 2018, 96% of watch time on Hotstar comes from videos longer than 20 minutes, while one–third of Hotstar subscribers watch television shows. In 2019, Hotstar began investing ₹120 crore in generating original content such as "Hotstar Specials." 80% of the viewership on Hotstar comes from drama, movies and sports programs. Hotstar has the exclusive streaming rights of IPL in India. === Netflix === American streaming service Netflix entered India in January 2016. In April 2017, it was registered as a limited liability partnership (LLP) and started commissioning content. It earned a net profit of ₹2020,000 (₹2.02 million) for fiscal year 2017. In fiscal year 2018, Netflix earned revenues of ₹580 million. According to Morgan Stanley Research, Netflix had the highest average watch time of more than 120 minutes but viewer counts of around 20 million in July 2018. As of 2018, Netflix has six million subscribers, of which 5–6% are paid members. India was not affected by Netflix's July 2018 increase in subscription rates for the US and Latin America. Netflix has stated its intent to invest ₹600 crore in the production of Indian original programming. In late 2018, Netflix bought 150,000 square feet (14,000 m2) of office space in Bandra–Kurla Complex (BKC) in Mumbai as their head office. As of December 2018, Netflix has more than 40 employees in India. === Other OTT providers === Sun NXT is an Indian video on demand service run by Sun TV Network. It was launched in June 2017, streaming in the Tamil language and six other languages. The platform has more than 4,000 Tamil movies and 200 Tamil shows, as well as regional movies and shows. Sun NXT also streams a large library of its own Sun TV shows and movies. Amazon Prime Video was launched in 2016. The platform has 2,300 titles available including 2,000 movies and about 400 shows. It has announced that it will invest ₹20 billion in creating original content in India. Besides English, Prime Video is available in six Indian languages as of December 2018. Amazon India launched Amazon Prime Music in February 2018. Eros Now, an OTT platform launched by Eros International, has the most content among the OTT providers in India, including over 12,000 films, 100,000 music tracks and albums, and 100 TV shows. Eros Now was named the Best OTT Platform of the Year 2019 at the British Asian Media Awards. It has 211.5 million registered users and 36.2 million paying subscribers as of September 2020. In February 2020, Aha OTT platform was launched, broadcasting exclusively Telugu content. In 2021, Planet Marathi became the first OTT platform dedicated to Marathi content in India, including web-series, films, music, theater, fiction and non-fiction reality shows. It is available for both Android and iOS mobile devices along with Android TV and Amazon Fire TV devices. Bollywood actress Madhuri Dixit helped launch the platform. With rising interest for Korean dramas, Rakuten Viki saw its biggest jump of web traffic from India in 2020 due to the COVID-19 lockdown, which led to ad localization on the platform. The OTT market in fiscal year 2020 was estimated to be worth $1.7 billion. === SonyLIV and ZEE5 === In December 2021, Sony and Zee announced their merger, and announced plans to merge their OTT platforms. The merger was called off. === OTT services launched as Amazon Prime video channels === The list is by alphabetical order, not by rank or popularity. == Content regulation == Due to the absence of any rules and regulation regarding OTT content, many OTT providers were accused of showing nudity, vulgarity and obscenity and hurting Hindu religious sentiments in their shows. Series which were the focus of controversy include Four More Shots Please!, Tandav, Paatal Lok, Sacred Games, Mirzapur Lust stories franchise, Rana Naidu. Thank You for Coming, and Annapoorani (2023). According to media reports, between 2018 and 2024, some OTT platforms emerged which started showing porn in the form of web series. Both the Supreme Court and Delhi High Court say that OTT regulation is necessary. === OTT regulation === On 25 Feb 2021, Indian govt introduced self-regulation rules for OTT platforms to stop obscene content and abusive language. On 19 March 2023, I&B minister Anurag Thakur said that self regulation does not mean that OTT should show obscenity and nudity. On 15 April 2023, I&B Secretary Apurva Chandra has said because of the government's soft-touch regulations on OTT industry have led to the creation of content that is undesirable and vulgar. On 26 April 2023, MIB India said that if nudity and obscenity is seen on any OTT platform, strict action will be taken against it. On 16 May 2023, Don't show obscene content, parliamentary panel told to Netflix and Amazon Prime Video. On 20 June 2023, the government told Netflix, Disney+ Hotstar and all other streaming services that their content should be independently reviewed for obscenity and violence before being shown online. On 27 June 2023, DPCGC took punitive action against Ullu for streaming obscene content and asked them to remove all their explicit shows or remove all adult scenes within 15 days. On 18 July 2023, Anarug Thakur said in a meeting with all OTT stakeholders that demeaning Indian culture will not be tolerated. OTT can't show vulgarity and nudity in the garb of 'creative expression'.The cited sources do not mention vulgarity - they say this was about demeaning Indian culture/society. On 22 August 2023, Indian government assured that it will bring rules and regulation to regulate vulgar and obscene content on social media and OTT platforms. On 10 November 2023, MIB India introduces the 'Broadcasting Service Regulation Bill', which included Programme code with Content Evaluation Committee(CEC) for every OTT platforms. Currently public consultation is ongoing till 15 January 2024. The draft bill mandates that all OTT streaming platforms can only broadcast those web series or content, which will be duly certified by Content Evaluation Committee(CEC). On 14 March 2024, the Ministry of Information and Broadcasting banned over 18 OTT apps from Google play store and suspended all of their 57 social media accounts, as well as closed nineteen streaming websites. The banned platforms were MoodX, Prime Play, Hunters, Besharams, Rabbit movies, Voovi, Fugi, Mojflix, Chikooflix, Nuefliks, Xtramood, NeonX VIP, X Prime, Tri Flicks, Uncut Adda, Dreams Films, Hot Shots VIP, and Yessma. On 25 July 2025, the Ministry of Information and Broadcasting banned from 25 OTT apps from Google play store and suspended all of their 40 social media accounts, as well as 26 closed streaming websites. The banned platforms were include ALTT, Ullu, Big Shots App, Desiflix, Boomex, NeonX VIP, Navarasa Lite, Gulab App, Kangan App, Bull App, ShowHit, Jalva App, Wow Entertainment, Look Entertainment, Hitprime, Fugi, Feneo, ShowX, Sol Talkies, Adda TV, HotX VIP, Hulchul App, MoodX, Triflicks, and Mojflix. On 24 February 2026, the Ministry of Information and Broadcasting banned from 5 OTT apps from Google play store and suspended all of their 5 social media accounts, as well as 5 closed streaming websites. The banned platforms were include Feel App, Digi Movieplex, Jugnu App, MoodX VIP, and Koyal Playpro. === Legal action === Currently OTT is regulated under the IT Rules 2021, which clearly stated that 'No content that is prohibited by law at the time being force can be Publishing or transmitted'. MIB has continuously taking action

    Read more →
  • Word error rate

    Word error rate

    Word error rate (WER) is a common metric of the performance of a speech recognition or machine translation system. The WER metric typically ranges from 0 to 1, where 0 indicates that the compared pieces of text are exactly identical, and 1 (or larger) indicates that they are completely different with no similarity. This way, a WER of 0.8 means that there is an 80% error rate for compared sentences. The general difficulty of measuring performance lies in the fact that the recognized word sequence can have a different length from the reference word sequence (supposedly the correct one). The WER is derived from the Levenshtein distance, working at the word level instead of the phoneme level. The WER is a valuable tool for comparing different systems as well as for evaluating improvements within one system. This kind of measurement, however, provides no details on the nature of translation errors and further work is therefore required to identify the main source(s) of error and to focus any research effort. This problem is solved by first aligning the recognized word sequence with the reference (spoken) word sequence using dynamic string alignment. Examination of this issue is seen through a theory called the power law that states the correlation between perplexity and word error rate. Word error rate can then be computed as: W E R = S + D + I N = S + D + I S + D + C {\displaystyle {\mathit {WER}}={\frac {S+D+I}{N}}={\frac {S+D+I}{S+D+C}}} where S is the number of substitutions, D is the number of deletions, I is the number of insertions, C is the number of correct words, N is the number of words in the reference (N=S+D+C) The intuition behind 'deletion' and 'insertion' is how to get from the reference to the hypothesis. So if we have the reference "This is wikipedia" and hypothesis "This _ wikipedia", we call it a deletion. Note that since N is the number of words in the reference, the word error rate can be larger than 1.0, namely if the number of insertions I is larger than the number of correct words C. When reporting the performance of a speech recognition system, sometimes word accuracy (WAcc) is used instead: W A c c = 1 − W E R = N − S − D − I N = C − I N {\displaystyle {\mathit {WAcc}}=1-{\mathit {WER}}={\frac {N-S-D-I}{N}}={\frac {C-I}{N}}} Since the WER can be larger than 1.0, the word accuracy can be smaller than 0.0. == Experiments == It is commonly believed that a lower word error rate shows superior accuracy in recognition of speech, compared with a higher word error rate. However, at least one study has shown that this may not be true. In a Microsoft Research experiment, it was shown that, if people were trained under "that matches the optimization objective for understanding", (Wang, Acero and Chelba, 2003) they would show a higher accuracy in understanding of language than other people who demonstrated a lower word error rate, showing that true understanding of spoken language relies on more than just high word recognition accuracy. == Other metrics == One problem with using a generic formula such as the one above, however, is that no account is taken of the effect that different types of error may have on the likelihood of successful outcome, e.g. some errors may be more disruptive than others and some may be corrected more easily than others. These factors are likely to be specific to the syntax being tested. A further problem is that, even with the best alignment, the formula cannot distinguish a substitution error from a combined deletion plus insertion error. Hunt (1990) has proposed the use of a weighted measure of performance accuracy where errors of substitution are weighted at unity but errors of deletion and insertion are both weighted only at 0.5, thus: W E R = S + 0.5 D + 0.5 I N {\displaystyle {\mathit {WER}}={\frac {S+0.5D+0.5I}{N}}} There is some debate, however, as to whether Hunt's formula may properly be used to assess the performance of a single system, as it was developed as a means of comparing more fairly competing candidate systems. A further complication is added by whether a given syntax allows for error correction and, if it does, how easy that process is for the user. There is thus some merit to the argument that performance metrics should be developed to suit the particular system being measured. Whichever metric is used, however, one major theoretical problem in assessing the performance of a system is deciding whether a word has been “mis-pronounced,” i.e. does the fault lie with the user or with the recogniser. This may be particularly relevant in a system which is designed to cope with non-native speakers of a given language or with strong regional accents. The pace at which words should be spoken during the measurement process is also a source of variability between subjects, as is the need for subjects to rest or take a breath. All such factors may need to be controlled in some way. For text dictation it is generally agreed that performance accuracy at a rate below 95% is not acceptable, but this again may be syntax and/or domain specific, e.g. whether there is time pressure on users to complete the task, whether there are alternative methods of completion, and so on. The term "Single Word Error Rate" is sometimes referred to as the percentage of incorrect recognitions for each different word in the system vocabulary. == Edit distance == The word error rate may also be referred to as the length normalized edit distance. The normalized edit distance between X and Y, d( X, Y ) is defined as the minimum of W( P ) / L ( P ), where P is an editing path between X and Y, W ( P ) is the sum of the weights of the elementary edit operations of P, and L(P) is the number of these operations (length of P).

    Read more →
  • International Teletraffic Congress

    International Teletraffic Congress

    The International Teletraffic Congress (ITC) is the first international conference in networking science and practice. It was created in 1955 by Arne Jensen to initially cater to the emerging need to understand and model traffic in telephone networks using stochastic methodologies, and to bring together researchers with these considerations as a common theme. Up through World War II, teletraffic research was done mainly by engineers and mathematicians working in telephone companies. Most of their work was published in local or company journals. In 1955, however, the field acquired a formal, international, institutional structure, with the organization of the first International Teletraffic Congress (ITC). Over the years, it has broaden its scope to address a wide spectrum ranging from the mathematical theory of traffic processes, stochastic system modelling and analysis, traffic and performance measurements, network management, traffic engineering to network capacity planning and cost optimization, including network economics and reliability for various types of networks. ITC served as a forum for all theoretical fundamentals and engineering practices for large-scale deployment and operation of telecommunications networks. Since its inception, ITC witnessed the evolution of communications and networking: the influence of computer science on telecommunication, the advent of the Internet and the massive deployment of mobile communications and optics, the appearance of peer-to-peer networking and social networks, the ever increasing speed and flexibility of new communication technologies, networks, user devices, and applications, and the ever changing operation challenges arising from this development. ITC documented this evolution with contemporary measurement studies, performance analyses of new technologies, recommendations for provisioning and configuration, and greatly contributed to the methodological toolbox of network scientists. Today, with its conferences, specialist seminars, regional seminars, training courses and publications, the ITC aims at a worldwide forum for all questions related to network and service performance, management, and assessment, both present and futuristic. The notion of traffic is broadly used to encompass data traffic from the MAC layer all the way to application traffic in the application layer. The scope of ITC is thus ranging all issues embedding operations, design, planning, economics and performance analysis of current and emerging communication networks and services, to be addressed by applying a variety of tools from different fields, such as Stochastic Processes, Information theory, Control theory, Signal and Processing, Game theory and optimization techniques, Statistical methodologies and Artificial Intelligence techniques. The target audience of such issues is experts from research organizations, universities, equipment vendors and suppliers, network operators, service providers, system integrators and international technical organizations, guaranteeing a well-balanced contribution from theory, application, and practice. The general goal remains to bring researchers and practitioners together toward operational understanding of all types of current and future networks. The ITC is ruled by the International Advisory Council (IAC) which gathers a number of technical experts, from universities and the research arms of key corporations in the industry, from countries having a strong tradition in teletraffic development. The IAC responsibilities are to disseminate information on teletraffic which is of interest for the whole community and: to select the locations of Plenary Congresses and to ensure their high-level technical programme to support Specialist Seminars on specific topics of current interest to promote Regional Seminars for the dissemination of teletraffic concepts in developing countries to facilitate the liaison activity with the ITU through participation in the standardization process and in the Development Programme The technical program and the organization of each ITC event remains within the responsibilities of the hosting country, but with significant IAC support to guarantee that the event is consistent with the quality standards established during the previous congresses. The ITC Plenary Congresses were scheduled tri-annually from 1955 until 1995 when the interval became bi-annual to account for the ever-accelerating development of network technologies, products and services and the associated dramatic increases in network demands. Similarly, to better cover the impact of dramatic changes undergoing in the field of computer and communication systems, networks and usage, it has been decided to hold the Plenary Congress on an annual basis from 2009. == Content == Teletraffic science is the traditional term for all theoretical fundamentals and engineering practices to describe data flows in telecommunication networks, the performance of the usage of network resources, procedures for sizing of resources and engineering the networks for given traffic load and quality of service requirements. For more than 50 years of the 20th century, traffic or teletraffic has been identified primarily with telephone networks. With the huge development of computers, stored program control of network nodes and computer communication, the traditional teletraffic science field naturally extended to computer networks, mobile and wireless/optical networks, and for a wide spectrum of new applications. The convergence between the voice network, the Internet, the television and mobility raised new questions that request new models and tools to be developed. In addition, the development of community networks, home networking, multiple access networking technologies, and the advent of pervasive and ambient communications dictates new challenges to be addressed. Today, ITC addresses the emerging paradigms such as an increasing diversity of distributed applications and services over various media like mobile/optical networks, enabling new markets and economy. ITC has steered the evolutions in communications since its creation in 1955 and remains at the forefront of innovation regarding modeling and performance. The scientific roots of communications traffic are based on the theory of probability and stochastic processes, modelling and performance evaluation. Modelling is the key for the mathematical description and quantitative performance analysis. Traffic flows are described by stochastic processes with complex dependencies which have to be validated by traffic measurements. Modelling also includes operational properties of resource control reflected by service strategies such as queueing disciplines, admission control, and routing. The results of such performance analyses are used for resource dimensioning (sizing), resource management, and network optimization while providing targeted Quality of Service. Teletraffic science is closely related to methods of operation research (queueing theory, optimization, forecasting) and computational sciences (simulation technology distributed systems). In this context, ITC represents a wide community of researchers and practitioners and is regularly organizing events like Congresses, Specialist Seminars and Workshops in order to discuss the latest changes in the modelling, design and performance of communication systems, networks and services. === The evolution of technologies of the 20th century === ITC has been witnessing the change of communication and networking technologies which are reflected in the proceedings and programs of the congresses. The specialist seminars and the motto of the congresses thereby reflect the hot topics of that time and the evolution. Selected topics of the 70's, 80's and 90's were 1998: Traffic Issues related to Multimedia and Nomadic Communications 1995: Traffic Modeling and Measurement in Broadband and Mobile Communications 1990: Broadband Technologies: Architectures, Applications, Control and Performance 1986: ISDN Traffic Issues 1984: Fundamentals of Teletraffic Theory 1977: Modeling of SPC Exchanges and Data Networks === Recent topics in the 21st century === With the rise of the Internet, new networking paradigms and technologies but also new challenges emerged: 2020: Teletraffic in the era of beyond-5G and AI 2019: Networked Systems and Services 2018: Teletraffic in the Smart World 2017: Ubiquitous, software-based, and sustainable networks and services 2016: Digital Connected World 2015: Traffic, Performance and Big Data 2014: Towards a Sustainable World 2013: Energy Efficient and Green Networking 2010: Multimedia Applications - Traffic, Performance and QoE 2009: Network Virtualization - Concepts and Performance 2008: Future Internet Design and Experimental Facilities 2008: Quality of Experience 2002: Internet Traffic Engineering and Traffic Management == Arne Jensen Lifetime Achievement Awards == The Arne Jensen Lifetime A

    Read more →
  • Web API

    Web API

    A web API is an application programming interface (API) for either a web server or a web browser. As a web development concept, it can be related to a web application's client side (including any web frameworks being used). A server-side web API consists of one or more publicly exposed endpoints to a defined request–response message system, typically expressed in JSON or XML by means of an HTTP-based web server. A server API (SAPI) is not considered a server-side web API, unless it is publicly accessible by a remote web application. == Client side == A client-side web API is a programmatic interface to extend functionality within a web browser or other HTTP client. Originally these were most commonly in the form of native plug-in browser extensions however most newer ones target standardized JavaScript bindings. The Mozilla Foundation created their WebAPI specification which is designed to help replace native mobile applications with HTML5 applications. Google created their Native Client architecture which is designed to help replace insecure native plug-ins with secure native sandboxed extensions and applications. They have also made this portable by employing a modified LLVM AOT compiler. == Server side == A server-side web API consists of one or more publicly exposed endpoints to a defined request–response message system, typically expressed in JSON or XML. The web API is exposed most commonly by means of an HTTP-based web server. Mashups are web applications which combine the use of multiple server-side web APIs. Webhooks are server-side web APIs that take input as a Uniform Resource Identifier (URI) that is designed to be used like a remote named pipe or a type of callback such that the server acts as a client to dereference the provided URI and trigger an event on another server which handles this event thus providing a type of peer-to-peer IPC. === Endpoints === Endpoints are important aspects of interacting with server-side web APIs, as they specify where resources can be accessed by third-party software. Usually the access is via a URI to which HTTP requests are posted, and from which the response is thus expected. Web APIs may be public or private, the latter of which requires an access token. Endpoints need to be static, otherwise the correct functioning of software that interacts with them cannot be guaranteed. If the location of a resource changes (and with it the endpoint) then previously written software will break, as the required resource can no longer be found at the same place. As API providers still want to update their web APIs, many have introduced a versioning system in the URI that points to an endpoint. === Resources versus services === Web 2.0 Web APIs often use machine-based interactions such as REST and SOAP. RESTful web APIs use HTTP methods to access resources via URL-encoded parameters, and use JSON or XML to transmit data. By contrast, SOAP protocols are standardized by the W3C and mandate the use of XML as the payload format, typically over HTTP. Furthermore, SOAP-based Web APIs use XML validation to ensure structural message integrity, by leveraging the XML schemas provisioned with WSDL documents. A WSDL document accurately defines the XML messages and transport bindings of a Web service. === Documentation === Server-side web APIs are interfaces for the outside world to interact with the business logic. For many companies this internal business logic and the intellectual property associated with it are what distinguishes them from other companies, and potentially what gives them a competitive edge. They do not want this information to be exposed. However, in order to provide a web API of high quality, there needs to be a sufficient level of documentation. One API provider that not only provides documentation, but also links to it in its error messages is Twilio. However, there are now directories of popular documented server-side web APIs. === Growth and impact === The number of available web APIs has grown consistently over the past years, as businesses realize the growth opportunities associated with running an open platform, that any developer can interact with. ProgrammableWeb tracks over 24000 Web APIs that were available in 2022, up from 105 in 2005. Web APIs have become ubiquitous. There are few major software applications/services that do not offer some form of web API. One of the most common forms of interacting with these web APIs is via embedding external resources, such as tweets, Facebook comments, YouTube videos, etc. In fact there are very successful companies, such as Disqus, whose main service is to provide embeddable tools, such as a feature-rich comment system. Any website of the TOP 100 Alexa Internet ranked websites uses APIs and/or provides its own APIs, which is a very distinct indicator for the prodigious scale and impact of web APIs as a whole. As the number of available web APIs has grown, open source tools have been developed to provide more sophisticated search and discovery. APIs.json provides a machine-readable description of an API and its operations, and the related project APIs.io offers a searchable public listing of APIs based on the APIs.json metadata format. === Business === ==== Commercial ==== Many companies and organizations rely heavily on their Web API infrastructure to serve their core business clients. In 2014 Netflix received around 5 billion API requests, most of them within their private API. ==== Governmental ==== Many governments collect a lot of data, and some governments are now opening up access to this data. The interfaces through which this data is typically made accessible are web APIs. Web APIs allow for data, such as "budget, public works, crime, legal, and other agency data" to be accessed by any developer in a convenient manner. == Example == An example of a popular web API is the Astronomy Picture of the Day API operated by the American space agency NASA. It is a server-side API used to retrieve photographs of space or other images of interest to astronomers, and metadata about the images. According to the API documentation, the API has one endpoint: https://api.nasa.gov/planetary/apod The documentation states that this endpoint accepts GET requests. It requires one piece of information from the user, an API key, and accepts several other optional pieces of information. Such pieces of information are known as parameters. The parameters for this API are written in a format known as a query string, which is separated by a question mark character (?) from the endpoint. An ampersand (&) separates the parameters in the query string from each other. Together, the endpoint and the query string form a URL that determines how the API will respond. This URL is also known as a query or an API call. In the below example, two parameters are transmitted (or passed) to the API via the query string. The first is the required API key and the second is an optional parameter — the date of the photograph requested. https://api.nasa.gov/planetary/apod?api_key=DEMO_KEY&date=1996-12-03 Visiting the above URL in a web browser will initiate a GET request, calling the API and showing the user a result, known as a return value or as a return. This API returns JSON, a type of data format intended to be understood by computers, but which is somewhat easy for a human to read as well. In this case, the JSON contains information about a photograph of a white dwarf star: The above API return has been reformatted so that names of JSON data items, known as keys, appear at the start of each line. The last of these keys, named url, indicates a URL which points to a photograph: https://apod.nasa.gov/apod/image/9612/ngc2440_hst2.jpg Following the above URL, a web browser user would see this photo: Although this API can be called by an end user with a web browser (as in this example) it is intended to be called automatically by software or by computer programmers while writing software. JSON is intended to be parsed by a computer program, which would extract the URL of the photograph and the other metadata. The resulting photo could be embedded in a website, automatically sent via text message, or used for any other purpose envisioned by a software developer.

    Read more →
  • Telecommunications device for the deaf

    Telecommunications device for the deaf

    A telecommunications device for the deaf (TDD) is a teleprinter, an electronic device for text communication over a telephone line, that is designed for use by persons with hearing or speech difficulties. Other names for the device include teletypewriter (TTY), textphone (common in Europe), and minicom (United Kingdom). The typical TDD is a device about the size of a typewriter or laptop computer with a QWERTY keyboard and small screen that uses an LED, LCD, or VFD screen to display typed text electronically. In addition, TDDs commonly have a small spool of paper on which text is also printed – old versions of the device had only a printer and no screen. The text is transmitted live, via a telephone line, to a compatible device, i.e. one that uses a similar communication protocol. Special telephone services have been developed to carry the TDD functionality even further. In certain countries, there are systems in place so that a deaf person can communicate with a hearing person on an ordinary voice phone using a human relay operator. There are also "carry-over" services, enabling people who can hear but cannot speak ("hearing carry-over", a.k.a. "HCO"), or people who cannot hear but are able to speak ("voice carry-over", a.k.a. "VCO") to use the telephone. The term TDD is sometimes discouraged because people who are deaf are increasingly using mainstream devices and technologies to carry out most of their communication. The devices described here were developed for use on the partially-analog Public Switched Telephone Network (PSTN). They do not work well on the new internet protocol (IP) networks. Thus as society increasingly moves toward IP based telecommunication, the telecommunication devices used by people who are deaf will not be TDDs. In the US and Canada, the devices are referred to as TTYs. Teletype Corporation, of Skokie, Illinois, made page printers for text, notably for news wire services and telegrams, but these used standards different from those for deaf communication, and although in quite widespread use, were technically incompatible. Furthermore, these were sometimes referred to by the "TTY" initialism, short for "Teletype". When computers had keyboard input mechanisms and page printer output, before CRT terminals came into use, Teletypes were the most widely used devices. They were called "console typewriters". (Telex used similar equipment, but was a separate international communication network.) == History == === APCOM acoustic coupler or MODEM device === The TDD concept was developed by James C. Marsters (1924–2009), a dentist and private airplane pilot who became deaf as an infant because of scarlet fever, and Robert Weitbrecht, a deaf physicist. In 1964, Marsters, Weitbrecht and Andrew Saks, an electrical engineer and grandson of the founder of the Saks Fifth Avenue department store chain, founded APCOM (Applied Communications Corp.), located in the San Francisco Bay area, to develop the acoustic coupler, or modem; their first product was named the PhoneType. APCOM collected old teleprinter machines (TTYs) from the Department of Defense and junkyards. Acoustic couplers were cabled to TTYs enabling the AT&T standard Model 500 telephone to couple, or fit, into the rubber cups on the coupler, thus allowing the device to transmit and receive a unique sequence of tones generated by the different corresponding TTY keys. The entire configuration of teleprinter machine, acoustic coupler, and telephone set became known as the TTY. Weitbrecht invented the acoustic coupler modem in 1964. The actual mechanism for TTY communications was accomplished electro-mechanically through frequency-shift keying (FSK) allowing only half-duplex communication, where only one person at a time can transmit. === Paul Taylor TTY device === During the late 1960s, Paul Taylor combined Western Union Teletype machines with modems to create teletypewriters, known as TTYs. He distributed these early, non-portable devices to the homes of many in the deaf community in St. Louis, Missouri. He worked with others to establish a local telephone wake-up service. In the early 1970s, these small successes in St. Louis evolved into the nation's first local telephone relay system for the deaf. === Micon Industries MCM device === In 1973, the Manual Communications Module (MCM), which was the world's first electronic portable TTY allowing two-way telecommunications, premiered at the California Association of the Deaf convention in Sacramento, California. The battery-powered MCM was invented and designed by a deaf news anchor and interpreter, Kit Patrick Corson, in conjunction with Michael Cannon and physicist Art Ogawa. It was manufactured by Michael Cannon's company, Micon Industries, and initially marketed by Kit Corson's company, Silent Communications. In order to be compatible with the existing TTY network, the MCM was designed around the five-bit Baudot code established by the older TTY machines instead of the ASCII code used by computers. The MCM was an instant success with the deaf community despite the drawback of a $599 cost. Within six months there were more MCMs in use by the deaf and hard of hearing than TTY machines. After a year Micon took over the marketing of the MCM and subsequently concluded a deal with Pacific Bell (who coined the term "TDD") to purchase MCMs and rent them to deaf telephone subscribers for $30 per month. After Micon formed an alliance with APCOM, Michael Cannon (Micon), Paul Conover (Micon), and Andrea Saks (APCOM) successfully petitioned the California Public Utilities Commission (CPUC), resulting in a tariff that paid for TTY devices to be distributed free of cost to deaf persons. Micon produced over 1,000 MCMs per month, resulting in approximately 50,000 MCMs being disseminated into the deaf community. Before he left Micon in 1980, Michael Cannon developed several computer compatible variations of the MCM and a portable, battery operated printing TTY, but they were never as popular as the original MCM. Newer model TTYs could communicate with selectable codes that allow communications at a higher bit rate on those models similarly equipped. However, the lack of true computer interface functionality spelled the demise of the original TTY and its clones. During the mid-1970s, other so-called portable telephone devices were being cloned by other companies, and this was the time period when the term "TDD" began being used largely by those outside the deaf community. === Text messaging and the Def-Tone System (DTS) === This relay system became known commonly as the Def-Tone System (DTS) because the tones representing letters of the alphabet were eventually carried in tones outside the range of human hearing. Today, this is commonly called multi-tap because you press a number 1, 2 or 3 times to get a corresponding letter. In 1994 Joseph Alan Poirier, a college student-worker, recommended using the system to send texts to forklifts to improve delivery of parts to the assembly line at GM Powertrain in Toledo, Ohio, and sending a text to pagers. He recommended taking pagers to alphanumeric displays incorporating the same system in discussions with the pager supplier for Outback Steakhouse and having relays put in the forklifts to ping alert messages to the pagers used in that system. He called it text messaging, coining the phrase. It is theorized that when Toyota forklift was allegedly hired by GM for this work, one of the subcontractors, Kyocera, utilized the work for the Toyota forklift company to create text messaging for cell phones. === Marsters Award === In 2009, AT&T received the James C. Marsters Promotion Award from TDI (formerly Telecommunications for the Deaf, Inc.) for its efforts to increase accessibility to communication for people with disabilities. The award holds some irony; it was AT&T that, in the 1960s, resisted efforts to implement TTY technology, claiming it would damage its communication equipment. In 1968, the Federal Communications Commission struck down AT&T's policy and forced it to offer TTY access to its network. == Protocols == There are many different standards for TDDs and textphones. === Original 5-bit Baudot code === The original standard used by TTYs is a variant of the Baudot code. The maximum speed of this protocol is 10 characters per second. This is a half-duplex protocol, which means that only one person at a time may transmit characters. If both try to transmit at the same time, the characters will be garbled on the other end. This protocol is commonly used in the United States. This is a variant of the Baudot code, implemented as 5-bits per character transmitted asynchronously using frequency-shift key-modulation at either 45.5 or 50 baud, 1 start bit, 5 data bits, and 1.5 stop bits. Details of the protocol implementation are available in TIA-825-A and also in T-REC V.18 Annex A "5-bit operational mode". === Turbo Code === The UltraTec company implements another protocol known as Enh

    Read more →
  • Supermind AI

    Supermind AI

    Supermind is a state-funded Chinese artificial intelligence platform that tracks scientists and researchers internationally. The platform is the flagship project of Shenzhen's International Science and Technology Information Center. It mines data from science and technology databases such as Springer, Wiley, Clarivate and Elsevier. It is intended to detect technological breakthroughs and to identify possible sources of talent as part of China's efforts to advance technologically. The platform also uses government data security and security intelligence organizations such as Peng Cheng Laboratory, the China National GeneBank, BGI Group and the Key Laboratory of New Technologies of Security Intelligence. According to Hong Kong-based Asia Times, the platform, "While not an overt espionage tool...may be used to identify key personnel who could be bribed, deceived or manipulated into divulging classified information". The Organisation for Economic Co-operation and Development (OECD) flagged the project as an incident, meaning it may be of interest to policymakers and other stakeholders. US technology group American Edge Project criticized the project as a global risk of China's security services using the platform to place agents in jobs with access to important information, recruit technical personnel, and identify targets for hacking operations.

    Read more →
  • Digital data

    Digital data

    Digital data or digital information, in information theory and information systems, is data or information represented as a string of discrete symbols, each of which can take on one of only a finite number of values from some alphabet, such as letters or digits. An example is a text document, which consists of a string of alphanumeric characters. The most common form of digital data in modern information systems is binary data, which is represented by a string of binary digits (bits) each of which can have one of two values, either 0 or 1. Digital data can be contrasted with analog data, which is represented by a value from a continuous range of real numbers. Analog data is transmitted by an analog signal, which not only takes on continuous values but can vary continuously with time, a continuous real-valued function of time. An example is the air pressure variation in a sound wave. Data requires interpretation to become information. In modern (post-1960) computer systems, all data is digital. The word digital comes from the same source as the words digit and digitus (the Latin word for finger), as fingers are often used for counting. Mathematician George Stibitz of Bell Telephone Laboratories used the word digital in reference to the fast electric pulses emitted by a device designed to aim and fire anti-aircraft guns in 1942. The term is most commonly used in computing and electronics, especially where real-world information is converted to binary numeric form as in digital audio and digital photography. == Symbol to digital conversion == Since symbols (for example, alphanumeric characters) are not continuous, representing symbols digitally is rather simpler than conversion of continuous or analog information to digital. Instead of sampling and quantization as in analog-to-digital conversion, such techniques as polling and encoding are used. A symbol input device usually consists of a group of switches that are polled at regular intervals to see which switches are switched. Data will be lost if, within a single polling interval, two switches are pressed, or a switch is pressed, released, and pressed again. This polling can be done by a specialized processor in the device to prevent burdening the main CPU. When a new symbol has been entered, the device typically sends an interrupt, in a specialized format, so that the CPU can read it. For devices with only a few switches (such as the buttons on a joystick), the status of each can be encoded as bits (usually 0 for released and 1 for pressed) in a single word. This is useful when combinations of key presses are meaningful, and is sometimes used for passing the status of modifier keys on a keyboard (such as shift and control). But it does not scale to support more keys than the number of bits in a single byte or word. Devices with many switches (such as a computer keyboard) usually arrange these switches in a scan matrix, with the individual switches on the intersections of x and y lines. When a switch is pressed, it connects the corresponding x and y lines together. Polling (often called scanning in this case) is done by activating each x line in sequence and detecting which y lines then have a signal, thus which keys are pressed. When the keyboard processor detects that a key has changed state, it sends a signal to the CPU indicating the scan code of the key and its new state. The symbol is then encoded or converted into a number based on the status of modifier keys and the desired character encoding. A custom encoding can be used for a specific application with no loss of data. However, using a standard encoding such as ASCII is problematic if a symbol such as 'ß' needs to be converted but is not in the standard. It is estimated that in the year 1986, less than 1% of the world's technological capacity to store information was digital and in 2007 it was already 94%. The year 2002 is assumed to be the year when humankind was able to store more information in digital than in analog format (the "beginning of the digital age"). == States == Digital data come in these three states: data at rest, data in transit, and data in use. The confidentiality, integrity, and availability have to be managed during the entire lifecycle from 'birth' to the destruction of the data. === Data at rest === Data at rest in information technology means data that is housed physically on computer data storage in any digital form (e.g. cloud storage, file hosting services, databases, data warehouses, spreadsheets, archives, tapes, off-site or cloud backups, mobile devices etc.). Data at rest includes both structured and unstructured data. This type of data is subject to threats from hackers and other malicious threats to gain access to the data digitally or physical theft of the data storage media. To prevent this data from being accessed, modified or stolen, organizations will often employ security protection measures such as password protection, data encryption, or a combination of both. The security options used for this type of data are broadly referred to as data-at-rest protection (DARP). Definitions include: "...all data in computer storage while excluding data that is traversing a network or temporarily residing in computer memory to be read or updated." "...all data in storage but excludes any data that frequently traverses the network or that which resides in temporary memory. Data at rest includes but is not limited to archived data, data which is not accessed or changed frequently, files stored on hard drives, USB thumb drives, files stored on backup tape and disks, and also files stored off-site or on a storage area network (SAN)." While it is generally accepted that archive data (i.e. which never changes), regardless of its storage medium, is data at rest and active data subject to constant or frequent change is data in use. “Inactive data” could be taken to mean data which may change, but infrequently. The imprecise nature of terms such as “constant” and “frequent” means that some stored data cannot be comprehensively defined as either data at rest or in use. These definitions could be taken to assume that Data at Rest is a superset of data in use; however, data in use, subject to frequent change, has distinct processing requirements from data at rest, whether completely static or subject to occasional change. ==== Security ==== Because of its nature data at rest is of increasing concern to businesses, government agencies and other institutions. Mobile devices are often subject to specific security protocols to protect data at rest from unauthorized access when lost or stolen and there is an increasing recognition that database management systems and file servers should also be considered as at risk; the longer data is left unused in storage, the more likely it might be retrieved by unauthorized individuals outside the network. Data encryption, which prevents data visibility in the event of its unauthorized access or theft, is commonly used to protect data in motion and increasingly promoted for protecting data at rest. The encryption of data at rest should only include strong encryption methods such as AES or RSA. Encrypted data should remain encrypted when access controls such as usernames and password fail. Increasing encryption on multiple levels is recommended. Cryptography can be implemented on the database housing the data and on the physical storage where the databases are stored. Data encryption keys should be updated on a regular basis. Encryption keys should be stored separately from the data. Encryption also enables crypto-shredding at the end of the data or hardware lifecycle. Periodic auditing of sensitive data should be part of policy and should occur on scheduled occurrences. Finally, only store the minimum possible amount of sensitive data. Tokenization is a non-mathematical approach to protecting data at rest that replaces sensitive data with non-sensitive substitutes, referred to as tokens, which have no extrinsic or exploitable meaning or value. This process does not alter the type or length of data, which means it can be processed by legacy systems such as databases that may be sensitive to data length and type. Tokens require significantly less computational resources to process and less storage space in databases than traditionally encrypted data. This is achieved by keeping specific data fully or partially visible for processing and analytics while sensitive information is kept hidden. Lower processing and storage requirements makes tokenization an ideal method of securing data at rest in systems that manage large volumes of data. A further method of preventing unwanted access to data at rest is the use of data federation especially when data is distributed globally (e.g. in off-shore archives). An example of this would be a European organisation which stores its archived data off-site in the US. Under the terms of the USA PATRIOT Act the American authorities can demand

    Read more →
  • History of operating systems

    History of operating systems

    Computer operating systems (OSes) provide a set of functions needed and used by most application programs on a computer, and the links needed to control and synchronize computer hardware. On the first computers, with no operating system, every program needed the full hardware specification to run correctly and perform standard tasks, and its own drivers for peripheral devices like printers and punched paper card readers. The growing complexity of hardware and application programs eventually made operating systems a necessity for everyday use. == Background == Early computers lacked any form of operating system. Instead, the user (rarely also the computer operator), had sole use of the machine for a scheduled period of time. The user would deliver his program to a computer operator who would be responsible for loading the computer with the program and data needed for its 'run'. Eventually, the end of a user's program could be detected and a control program automatically loaded which would load the next user's program, relieving the operator of having to load in each user's program individually and introducing the era of 'batched' programming. That is, a number of user programs could all be loaded together in a batch. Loading of program and data was accomplished in various ways including toggle switches (only used by a user on the earliest of computers, but later used by the computer operator to control the computer, e.g., to start it up, to shut it down, to 'pause', to 'dump' its RAM contents, and/or to control its input and/or its output), punched paper cards and magnetic or paper tape. Once loaded, the machine would be set to execute each program singly until that program completed, crashed, exceeded its time limit or went into a(n infinite) loop. In those early days, there were only 'Control Program' units for providing the software necessary to control the computers and ancillary hardware, e.g., for such semi hardware functions as I/O . None of the early 'Control Programs' were sufficiently sophisticated to recognize a looping user program or initiate a recovery action. Detection and recovery from a looping program was another critical operator function and was usually detected by the sound of the looping computer, whereupon the operator would simply initiate a complete dump of the executing program (for later debugging by the programmer) and then load in (or instruct the computer to go on to) the next user's program. Programs could sometimes be debugged via a control panel using dials, toggle switches and panel lights, making it a very manual and error-prone process. But, this was quite rare, since the high cost of even the simplest of the early computers prohibited such exclusive use of a computer by an individual programmer. Almost all program debugging was done away from any computer by the original programmer perusing the program and the dump of its execution obtained, e.g., by the computer operator or automatically by some computer hardware exception detection (such as a timeout, an attempt to divide by zero, or an over or underflow). Programmers then could only very rarely have more than one computer 'run' per day! Symbolic languages, e.g., assemblers and compilers were developed for programmers to translate symbolic program code into machine code that previously would have been hand-encoded. Later machines came with libraries of support code on punched cards or magnetic tape, which would be linked to the user's program to assist in operations such as input and output. This was the genesis of the modern-day operating system; however, machines still ran a single program or job at a time. At Cambridge University in England the job queue was at one time a string from which tapes attached to corresponding job tickets were hung with stationery pegs. == Mainframes == The first operating system used for real work was GM-NAA I/O, produced in 1956 by General Motors' Research division for its IBM 704. Most other early operating systems for IBM mainframes were also produced by customers. Early operating systems were very diverse, with each vendor or customer producing one or more operating systems specific to their particular mainframe computer. Every operating system, even from the same vendor, could have radically different models of commands, operating procedures, and such facilities as debugging aids. Typically, each time the manufacturer brought out a new machine, there would be a new operating system, and most applications would have to be manually adjusted, recompiled, and retested. === Systems on IBM hardware === Building on customer experience and requirements, IBM took on a more active role in developing operating systems for the 709, 1410, 7010, 7040, 7044, 7090 and 7094. IBM also collaborated with universities. The state of affairs continued until the mid 1960s when IBM, already a leading hardware vendor, stopped work on existing systems and put all its effort into developing the System/360 series of machines, all of which used the same instruction and input/output architecture. IBM intended to develop a single operating system for the new hardware, the OS/360. The problems encountered in the development of the OS/360 are legendary, and are described by Fred Brooks in The Mythical Man-Month—a book that has become a classic of software engineering. Because of performance differences across the hardware range and delays with software development, a whole family of operating systems was introduced instead of a single OS/360. IBM wound up releasing a series of stop-gaps followed by two longer-lived operating systems: OS/360 for mid-range and large systems. This was available in three system generation options: PCP for early users and for those without the resources for multiprogramming. MFT for mid-range systems, replaced by MFT-II in OS/360 Release 15/16. This had one successor, OS/VS1, which was discontinued in the 1980s. MVT for large systems. This was similar in most ways to PCP and MFT (most programs could be ported among the three without being re-compiled), but has more sophisticated memory management and a time-sharing facility, TSO. MVT had several successors including the current z/OS. DOS/360 for small System/360 models had several successors including the current z/VSE. It was significantly different from OS/360. IBM maintained full compatibility with the past, so that programs developed in the sixties can still run under z/VSE (if developed for DOS/360) or z/OS (if developed for MFT or MVT) with no change. IBM also developed TSS/360, a time-sharing system for the System/360 Model 67. Overcompensating for their perceived importance of developing a timeshare system, they set hundreds of developers to work on the project. Early releases of TSS were slow and unreliable; by the time TSS had acceptable performance and reliability, IBM wanted its TSS users to migrate to OS/360 and OS/VS2; while IBM offered a TSS/370 PRPQ, they dropped it after 3 releases. Several operating systems for the IBM S/360 and S/370 architectures were developed by third parties, including the Michigan Terminal System (MTS) and MUSIC/SP. === Other mainframe operating systems === Control Data Corporation developed the SCOPE operating systems in the 1960s, for batch processing and later developed the MACE operating system for time sharing, which was the basis for the later Kronos. In cooperation with the University of Minnesota, the Kronos and later the NOS operating systems were developed during the 1970s, which supported simultaneous batch and time sharing use. Like many commercial time sharing systems, its interface was an extension of the DTSS time sharing system, one of the pioneering efforts in timesharing and programming languages. In the late 1970s, Control Data and the University of Illinois developed the PLATO system, which used plasma panel displays and long-distance time sharing networks. PLATO was remarkably innovative for its time; the shared memory model of PLATO's TUTOR programming language allowed applications such as real-time chat and multi-user graphical games. For the UNIVAC 1107, UNIVAC, the first commercial computer manufacturer, produced the EXEC I operating system, and Computer Sciences Corporation developed the EXEC II operating system and delivered it to UNIVAC. EXEC II was ported to the UNIVAC 1108. Later, UNIVAC developed the EXEC 8 operating system for the 1108; it was the basis for operating systems for later members of the family. Like all early mainframe systems, EXEC I and EXEC II were a batch-oriented system that managed magnetic drums, disks, card readers and line printers; EXEC 8 supported both batch processing and on-line transaction processing. In the 1970s, UNIVAC produced the Real-Time Basic (RTB) system to support large-scale time sharing, also patterned after the Dartmouth BASIC system. Burroughs Corporation introduced the B5000 in 1961 with the MCP (Master Control Program) operating system. The B5000

    Read more →