AI For Business Edinburgh

AI For Business Edinburgh — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

NASA AI Assisted-Air Quality Monitoring Project

The NASA Expert-System Ion Trap Mass Spectrometer (ES-ITMS) Project was a public-private partnership to develop an artificial intelligence assisted, air quality monitoring system and was qualified for use on the Space Shuttle. The partnership was also the first cost and intellectual property shared public-partnership implemented by NASA, which used the commercial Research and Development Limited Partnership (RDLP) model that had been adopted by the Reagan Administration for Department of Defense semiconductor development, and recommended for use by NASA for space commercialization. The project partners included NASA, the University of Florida and Finnigan MAT Corporation, was organized and administered by the NASA Joint Enterprise Institute (subsequently NASA Joint Sponsored Program) and ran from 1988 through 1990. The partnership concluded final testing in 1991, generating four patents, expert system software and application protocol reports. The system was space qualified for use on the Shuttle and elements of the ES-ITMS system were integrated into the product Improvements for Finnigan MAT corporation. The success of the partnership lead NASA to create a pilot program to develop partnership business models as an ongoing management practice. == Purpose and objectives == The need to monitor air quality in confined spaces represented an increasing challenge for NASA's planned space missions and private sector facility managers facing the increased scrutiny of possible air contaminants. Up to the early 1980's, air quality monitors generally required large spaces and human technicians to interpret readings. This created a need for miniaturized air quality monitors that could generate reliable and accurate analytic results without on-site technician presence. NASA initiated projects to develop..."mobile and/or portable mass spectrometers" that evaluated the "tradeoff between instrumentation capabilities and space, weight and power considerations." NASA selected a "commercial ITMS instrument capable of generating electron ionization, chemical ionization and mass spectrometry data", to develop a linked expert system to accomplish analysis without human intervention. The commercial instrumentation was from Finnigan MAT corporation while the scientific expertise to support expert system development was available at the University of Florida. The project managers at NASA Ames created a single, integrated project using the RDLP model with objectives to: Develop AI/expert system software for instrument control (NASA's role) Expand sensitivity, selectivity and speed of the spectrometer (Univ Florida role) Expand the spectrometer analytic capability and automate the screening (Finnigan role) == Membership == The partnership included seven specialists from five member organizations: Federal Government National Aeronautics and Space Administration (NASA) NASA Ames Research Center (ARC) NASA Kennedy Space Center (KSC) Commercial Finnigan MAT Corporation (Thermo-Fisher Scientific) TGS Technology, Inc. Research Management University of Florida == Organization, management and administration == The technical project was organized into two development teams, one located in at the NASA Ames Research Center covering expert systems and analytic capabilities and one in Florida covering improved sensitivity and testing. The partnership management and administration was provided by a non-profit, partnership support organization: the Joint Enterprise Institute operating through San Francisco State University Foundation (SFSUF) with a NASA employee liaison, Syed Shariq. == Public-private partnership == The partnership structure was as a prototype test of a pilot NASA program to develop public-private partnership business models. The pilot program was known as the NASA Joint Sponsored Research Program (JSRP), which operated as the NASA Joint Enterprise Institute between 1988 and 1991. The partnership was the first public-private, research and development partnership implemented by NASA in response to national policy shifts to increase technology transfer and space commercialization. The partnership structure included a two year technology development and testing plan that cost $610,000, of which NASA funded $310,000, Finnigan $175,000 and the University of Florida $95,000. == Results and commercialization == The project generated patents (4), software (2) and application protocol reports (8). NASA gained use of the patents and jointly development software while Finnigan received commercial utilization rights. The results were commercialized within eighteen months of project completion. == Recognition == NASA recognized the project as a space qualified instrument. Its achievements were reported to the NASA Administrator, directly leading to establishment of the agency-wide Joint Sponsored Research Program.
Read more →
Structured-light 3D scanner

A structured-light 3D scanner is a device used to capture the three-dimensional shape of an object by projecting light patterns, such as grids or stripes, onto its surface. The deformation of these patterns is recorded by cameras and processed using specialized algorithms to generate a detailed 3D model. Structured-light 3D scanning is widely employed in fields such as industrial design, quality control, cultural heritage preservation, augmented reality gaming, and medical imaging. Compared to laser-based 3D scanning, structured-light scanners use non-coherent light sources, such as LEDs or projectors, which enable faster data acquisition and eliminate potential safety concerns associated with lasers. However, the accuracy of structured-light scanning can be influenced by external factors, including ambient lighting conditions and the reflective properties of the scanned object. == Principle == Projecting a narrow band of light onto a three-dimensional surface creates a line of illumination that appears distorted when viewed from perspectives other than that of the projector. This distortion can be analyzed to reconstruct the geometry of the surface, a technique known as light sectioning. Projecting patterns composed of multiple stripes or arbitrary fringes simultaneously enables the acquisition of numerous data points at once, improving scanning speed. While various structured light projection techniques exist, parallel stripe patterns are among the most commonly used. By analyzing the displacement of these stripes, the three-dimensional coordinates of surface details can be accurately determined. === Generation of light patterns === Two major methods of stripe pattern generation have been established: Laser interference and projection. The laser interference method works with two wide planar laser beam fronts. Their interference results in regular, equidistant line patterns. Different pattern sizes can be obtained by changing the angle between these beams. The method allows for the exact and easy generation of very fine patterns with unlimited depth of field. Disadvantages are high cost of implementation, difficulties providing the ideal beam geometry, and laser typical effects like speckle noise and the possible self interference with beam parts reflected from objects. Typically, there is no means of modulating individual stripes, such as with Gray codes. The projection method uses incoherent light and basically works like a video projector. Patterns are usually generated by passing light through a digital spatial light modulator, typically based on one of the three currently most widespread digital projection technologies, transmissive liquid crystal, reflective liquid crystal on silicon (LCOS) or digital light processing (DLP; moving micro mirror) modulators, which have various comparative advantages and disadvantages for this application. Other methods of projection could be and have been used, however. Patterns generated by digital display projectors have small discontinuities due to the pixel boundaries in the displays. Sufficiently small boundaries however can practically be neglected as they are evened out by the slightest defocus. A typical measuring assembly consists of one projector and at least one camera. For many applications, two cameras on opposite sides of the projector have been established as useful. Invisible (or imperceptible) structured light uses structured light without interfering with other computer vision tasks for which the projected pattern will be confusing. Example methods include the use of infrared light or of extremely high framerates alternating between two exact opposite patterns. === Calibration === Geometric distortions by optics and perspective must be compensated by a calibration of the measuring equipment, using special calibration patterns and surfaces. A mathematical model is used for describing the imaging properties of projector and cameras. Essentially based on the simple geometric properties of a pinhole camera, the model also has to take into account the geometric distortions and optical aberration of projector and camera lenses. The parameters of the camera as well as its orientation in space can be determined by a series of calibration measurements, using photogrammetric bundle adjustment. === Analysis of stripe patterns === There are several depth cues contained in the observed stripe patterns. The displacement of any single stripe can directly be converted into 3D coordinates. For this purpose, the individual stripe has to be identified, which can for example be accomplished by tracing or counting stripes (pattern recognition method). Another common method projects alternating stripe patterns, resulting in binary Gray code sequences identifying the number of each individual stripe hitting the object. An important depth cue also results from the varying stripe widths along the object surface. Stripe width is a function of the steepness of a surface part, i.e. the first derivative of the elevation. Stripe frequency and phase deliver similar cues and can be analyzed by a Fourier transform. Finally, the wavelet transform has recently been discussed for the same purpose. In many practical implementations, series of measurements combining pattern recognition, Gray codes and Fourier transform are obtained for a complete and unambiguous reconstruction of shapes. Another method also belonging to the area of fringe projection has been demonstrated, utilizing the depth of field of the camera. It is also possible to use projected patterns primarily as a means of structure insertion into scenes, for an essentially photogrammetric acquisition. === Precision and range === The optical resolution of fringe projection methods depends on the width of the stripes used and their optical quality. It is also limited by the wavelength of light. An extreme reduction of stripe width proves inefficient due to limitations in depth of field, camera resolution and display resolution. Therefore, the phase shift method has been widely established: A number of at least 3, typically about 10 exposures are taken with slightly shifted stripes. The first theoretical deductions of this method relied on stripes with a sine wave shaped intensity modulation, but the methods work with "rectangular" modulated stripes, as delivered from LCD or DLP displays as well. By phase shifting, surface detail of e.g. 1/10 the stripe pitch can be resolved. Current optical stripe pattern profilometry hence allows for detail resolutions down to the wavelength of light, below 1 micrometer in practice or, with larger stripe patterns, to approx. 1/10 of the stripe width. Concerning level accuracy, interpolating over several pixels of the acquired camera image can yield a reliable height resolution and also accuracy, down to 1/50 pixel. Arbitrarily large objects can be measured with accordingly large stripe patterns and setups. Practical applications are documented involving objects several meters in size. Typical accuracy figures are: Planarity of a 2-foot (0.61 m) wide surface, to 10 micrometres (0.00039 in). Shape of a motor combustion chamber to 2 micrometres (7.9×10−5 in) (elevation), yielding a volume accuracy 10 times better than with volumetric dosing. Shape of an object 2 inches (51 mm) large, to about 1 micrometre (3.9×10−5 in) Radius of a blade edge of e.g. 10 micrometres (0.00039 in), to ±0.4 μm === Navigation === As the method can measure shapes from only one perspective at a time, complete 3D shapes have to be combined from different measurements in different angles. This can be accomplished by attaching marker points to the object and combining perspectives afterwards by matching these markers. The process can be automated, by mounting the object on a motorized turntable on robotic inspection cell, or CNC positioning device. Markers can as well be applied on a positioning device instead of the object itself. The 3D data gathered can be used to retrieve CAD (computer aided design) data and models from existing components (reverse engineering), hand formed samples or sculptures, natural objects or artifacts. === Challenges === As with all optical methods, reflective or transparent surfaces raise difficulties. Reflections cause light to be reflected either away from the camera or right into its optics. In both cases, the dynamic range of the camera can be exceeded. Transparent or semi-transparent surfaces also cause major difficulties. In these cases, coating the surfaces with a thin opaque lacquer just for measuring purposes is a common practice. A recent method handles highly reflective and specular objects by inserting a 1-dimensional diffuser between the light source (e.g., projector) and the object to be scanned. Alternative optical techniques have been proposed for handling perfectly transparent and specular objects. Double reflections and inter-reflections can cause the stripe pattern to be overlaid with unwanted ligh
Read more →
Meta AI

Meta AI is a research division of Meta (formerly Facebook) that develops artificial intelligence and augmented reality technologies. == History == Meta AI was founded in 2013 as Facebook Artificial Intelligence Research (FAIR). It has workspaces in Menlo Park, London, New York City, Paris, Seattle, Pittsburgh, Tel Aviv, and Montreal as of 2025. In 2016, FAIR partnered with Google, Amazon, IBM, and Microsoft in creating the Partnership on Artificial Intelligence to Benefit People and Society. Meta AI was directed by Yann LeCun until 2018, when Jérôme Pesenti succeeded the role. Pesenti is formerly the CTO of IBM's big data group. FAIR's research includes self-supervised learning, generative adversarial networks, document classification and translation, and computer vision. FAIR released Torch deep-learning modules as well as PyTorch in 2017, an open-source machine learning framework, which was subsequently used in several deep learning technologies, such as Tesla's autopilot and Uber's Pyro. That same year, a pair of chatbots were falsely rumored to be discontinued for developing a language that was unintelligible to humans. FAIR clarified that the research had been shut down because they had accomplished their initial goal to understand how languages are generated by their models, rather than out of fear. FAIR was renamed Meta AI following the rebranding that changed Facebook, Inc. to Meta Platforms Inc. On October 1, 2025, Facebook announced "We will soon use your interactions with AI at Meta to personalize the content and ads you see". == Virtual assistant == Meta AI is also the name of the virtual assistant developed by the team, now integrated as a chatbot into Meta's social networking products. It is also available as a subscription-based stand-alone app. The virtual assistant was pre-installed on the second generation of Ray-Ban Meta smartglasses, and can incorporate inputs from the glasses' cameras after an update. It is also available on Quest 2 and newer HMDs. Since May 2024, the chatbot has summarized news from various outlets without linking directly to original articles, including in Canada, where news links are banned on its platforms. This use of news content without compensation and attribution has raised ethical and legal concerns, especially as Meta continues to reduce news visibility on its platforms. == Current research == === Natural language processing and chatbot === Natural language processing is the ability for machines to understand and generate natural language. The team is also researching unsupervised machine translation and multilingual chatbots. ==== Galactica ==== Galactica is a large language model (LLM) designed for generating scientific text. It was available for three days from 15 November 2022, before being withdrawn for generating racist and inaccurate content. ==== Llama ==== Llama is an LLM released in February 2023. As of January 2026, the most recent release is the Llama 4. === Hardware === Meta used CPUs and in-house custom chips before 2022; they switched to Nvidia GPUs since then. MTIA v1, one of their early chips, is designed for the company's content recommendation algorithms. It was fabricated on TSMC's 7 nm process technology and consumed 25W, capable of 51.2 TFlops FP16. == Controversy == The French media outlet Mediapart reports that in 2022, Facebook's parent company illegally used works accumulated by the pirate site LibGen to train its artificial intelligence.
Read more →
Virtual Woman

Virtual Woman is a software program that has elements of a chatbot, virtual reality, artificial intelligence, a video game, and a virtual human. It claims to be the oldest form of virtual life in existence, as it has been distributed since the late 1980s. Recent releases of the program can update their intelligence by connecting online and downloading newer personalities and histories. == Program play == When Virtual Woman starts, the user is presented with a list of options and then may choose their Virtual Woman's ethnic type, personality, location, clothing, etc. or load a pre-built Virtual Woman from a Digital DNA file. Once the options are determined, the user is presented with a 3-D animated Virtual Woman of their selection and then can engage them in conversation, progressing in a manner similar to that of its predecessor, ELIZA and its successors, the chatbots. In most versions of Virtual Woman, this is done through the keyboard, but some versions also support voice input. == In popular culture == Software sales and usage statistics from private companies are difficult to verify. WinSite, an independent Internet shareware distribution site that does publish public download counts, has for some time now listed some version of Virtual Woman in their top three shareware downloads of all time with well over seven hundred thousand downloads. == Compadre == The group of beta testers and advisers for Virtual Woman are referred to as Compadre and have their own beta testing site and forum. == Criticisms == As Virtual Woman has developed the ability to conduct longer and more realistic interactions, particularly in recent beta releases, criticism has arisen that this may lead some users to social isolation, or to use the program as a substitute for real human interaction. However, these are criticisms that have been leveled at all video games and at the use of the Internet itself. == Release history == Versions of Virtual Woman with rough release dates and PC platforms for which they were designed: Virtual Woman (????) (DOS) Virtual Woman for Windows (1991) (Windows 3.0) Virtual Woman 95 (1995) (Windows 3X, Windows 95) Virtual Woman 98 (1998) (Windows 3X, Windows 95) Virtual Woman 2000 (2000) (Windows 95+) Virtual Woman Millennium (Windows 95, XP) Virtual Woman Net ( Windows XP/Vista specific)
Read more →
Database index

A database index is a data structure that improves the speed of data retrieval operations on a database table at the cost of additional writes and storage space to maintain the index data structure. Indexes are used to quickly locate data without having to search every row in a database table every time said table is accessed. Indexes can be created using one or more columns of a database table, providing the basis for both rapid random lookups and efficient access of ordered records. An index is a copy of selected columns of data, from a table, that is designed to enable very efficient search. An index normally includes a "key" or direct link to the original row of data from which it was copied, to allow the complete row to be retrieved efficiently. Some databases extend the power of indexing by letting developers create indexes on column values that have been transformed by functions or expressions. For example, an index could be created on upper(last_name), which would only store the upper-case versions of the last_name field in the index. Another option sometimes supported is the use of partial index, where index entries are created only for those records that satisfy some conditional expression. A further aspect of flexibility is to permit indexing on user-defined functions, as well as expressions formed from an assortment of built-in functions. == Usage == === Support for fast lookup === Most database software includes indexing technology that enables sub-linear time lookup to improve performance, as linear search is inefficient for large databases. Suppose a database contains N data items and one must be retrieved based on the value of one of the fields. A simple implementation retrieves and examines each item according to the test. If there is only one matching item, this can stop when it finds that single item, but if there are multiple matches, it must test everything. This means that the number of operations in the average case is O(N) or linear time. Since databases may contain many objects, and since lookup is a common operation, it is often desirable to improve performance. An index is any data structure that improves the performance of lookup. There are many different data structures used for this purpose. There are complex design trade-offs involving lookup performance, index size, and index-update performance. Many index designs exhibit logarithmic (O(log(N))) lookup performance and in some applications it is possible to achieve flat (O(1)) performance. === Policing the database constraints === Indexes are used to police database constraints, such as UNIQUE, EXCLUSION, PRIMARY KEY and FOREIGN KEY. An index may be declared as UNIQUE, which creates an implicit constraint on the underlying table. Database systems usually implicitly create an index on a set of columns declared PRIMARY KEY, and some are capable of using an already-existing index to police this constraint. Many database systems require that both referencing and referenced sets of columns in a FOREIGN KEY constraint are indexed, thus improving performance of inserts, updates and deletes to the tables participating in the constraint. Some database systems support an EXCLUSION constraint that ensures that, for a newly inserted or updated record, a certain predicate holds for no other record. This can be used to implement a UNIQUE constraint (with equality predicate) or more complex constraints, like ensuring that no overlapping time ranges or no intersecting geometry objects would be stored in the table. An index supporting fast searching for records satisfying the predicate is required to police such a constraint. == Index architecture and indexing methods == === Non-clustered === The data is present in arbitrary order, but the logical ordering is specified by the index. The data rows may be spread throughout the table regardless of the value of the indexed column or expression. The non-clustered index tree contains the index keys in sorted order, with the leaf level of the index containing the pointer to the record (page and the row number in the data page in page-organized engines; row offset in file-organized engines). In a non-clustered index, The physical order of the rows is not the same as the index order. The indexed columns are typically non-primary key columns used in JOIN, WHERE, and ORDER BY clauses. There can be more than one non-clustered index on a database table. === Clustered === Clustering alters the data block into a certain distinct order to match the index, resulting in the row data being stored in order. Therefore, only one clustered index can be created on a given database table. Clustered indexes can greatly increase overall speed of retrieval, but usually only where the data is accessed sequentially in the same or reverse order of the clustered index, or when a range of items is selected. Since the physical records are in this sort order on disk, the next row item in the sequence is immediately before or after the last one, and so fewer data block reads are required. The primary feature of a clustered index is therefore the ordering of the physical data rows in accordance with the index blocks that point to them. Some databases separate the data and index blocks into separate files, others put two completely different data blocks within the same physical file(s). === Cluster === When multiple databases and multiple tables are joined, it is called a cluster (not to be confused with clustered index described previously). The records for the tables sharing the value of a cluster key shall be stored together in the same or nearby data blocks. This may improve the joins of these tables on the cluster key, since the matching records are stored together and less I/O is required to locate them. The cluster configuration defines the data layout in the tables that are parts of the cluster. A cluster can be keyed with a B-tree index or a hash table. The data block where the table record is stored is defined by the value of the cluster key. == Column order == The order that the index definition defines the columns in is important. It is possible to retrieve a set of row identifiers using only the first indexed column. However, it is not possible or efficient (on most databases) to retrieve the set of row identifiers using only the second or greater indexed column. For example, in a phone book organized by city first, then by last name, and then by first name, in a particular city, one can easily extract the list of all phone numbers. However, it would be very tedious to find all the phone numbers for a particular last name. One would have to look within each city's section for the entries with that last name. Some databases can do this, others just won't use the index. In the phone book example with a composite index created on the columns (city, last_name, first_name), if we search by giving exact values for all the three fields, search time is minimal—but if we provide the values for city and first_name only, the search uses only the city field to retrieve all matched records. Then a sequential lookup checks the matching with first_name. So, to improve the performance, one must ensure that the index is created on the order of search columns. == Applications and limitations == Indexes are useful for many applications but come with some limitations. Consider the following SQL statement: SELECT first_name FROM people WHERE last_name = 'Smith';. To process this statement without an index the database software must look at the last_name column on every row in the table (this is known as a full table scan). With an index the database simply follows the index data structure (typically a B-tree) until the Smith entry has been found; this is much less computationally expensive than a full table scan. Consider this SQL statement: SELECT email_address FROM customers WHERE email_address LIKE '%@wikipedia.org';. This query would yield an email address for every customer whose email address ends with "@wikipedia.org", but even if the email_address column has been indexed the database must perform a full index scan. This is because the index is built with the assumption that words go from left to right. With a wildcard at the beginning of the search-term, the database software is unable to use the underlying index data structure (in other words, the WHERE-clause is not sargable). This problem can be solved through the addition of another index created on reverse(email_address) and a SQL query like this: SELECT email_address FROM customers WHERE reverse(email_address) LIKE reverse('%@wikipedia.org');. This puts the wild-card at the right-most part of the query (now gro.aidepikiw@%), which the index on reverse(email_address) can satisfy. When the wildcard characters are used on both sides of the search word as %wikipedia.org%, the index available on this field is not used. Rather only a sequential search is performed, which takes ⁠ O ( N ) {\displaystyle
Read more →
Pandorabots

Pandorabots, Inc. is an artificial intelligence company that runs a web service for building and deploying chatbots. Pandorabots implements and supports development of the Artificial Intelligence Markup Language and makes portions of its code accessible for free. The Pandorabots Platform is "one of the oldest and largest chatbot hosting services in the world", allowing creation of virtual agents to hold human-like text or voice chats with consumers. The platform is written in Allegro Common LISP. == Use Cases == Common use cases include advertising, virtual assistance, e-learning, entertainment and education. The platform has also been used by academics and universities use the platform for teaching and research.
Read more →
Machine vision

Machine vision is the technology and methods used to provide imaging-based automatic inspection and analysis for such applications as automatic inspection, process control, and robot guidance, usually in industry. Machine vision refers to many technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of computer science. It attempts to integrate existing technologies in new ways and apply them to solve real world problems. The term is the prevalent one for these functions in industrial automation environments but is also used for these functions in other environment vehicle guidance. The overall machine vision process includes planning the details of the requirements and project, and then creating a solution. During run-time, the process starts with imaging, followed by automated analysis of the image and extraction of the required information. == Definition == Definitions of the term "Machine vision" vary, but all include the technology and methods used to extract information from an image on an automated basis, as opposed to image processing, where the output is another image. The information extracted can be a simple good-part/bad-part signal, or more a complex set of data such as the identity, position and orientation of each object in an image. The information can be used for such applications as automatic inspection and robot and process guidance in industry, for security monitoring and vehicle guidance. This field encompasses a large number of technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision is practically the only term used for these functions in industrial automation applications; the term is less universal for these functions in other environments such as security and vehicle guidance. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of basic computer science; machine vision attempts to integrate existing technologies in new ways and apply them to solve real world problems in a way that meets the requirements of industrial automation and similar application areas. The term is also used in a broader sense by trade shows and trade groups such as the Automated Imaging Association and the European Machine Vision Association. This broader definition also encompasses products and applications most often associated with image processing. The primary uses for machine vision are automatic inspection and industrial robot/process guidance. In more recent times the terms computer vision and machine vision have converged to a greater degree. See glossary of machine vision. == Imaging based automatic inspection and sorting == The primary uses for machine vision are imaging-based automatic inspection and sorting and robot guidance.; in this section the former is abbreviated as "automatic inspection". The overall process includes planning the details of the requirements and project, and then creating a solution. This section describes the technical process that occurs during the operation of the solution. === Methods and sequence of operation === The first step in the automatic inspection sequence of operation is acquisition of an image, typically using cameras, lenses, and lighting that has been designed to provide the differentiation required by subsequent processing. MV software packages and programs developed in them then employ various digital image processing techniques to extract the required information, and often make decisions (such as pass/fail) based on the extracted information. === Equipment === The components of an automatic inspection system usually include lighting, a camera or other imager, a processor, software, and output devices. === Imaging === The imaging device (e.g. camera) can either be separate from the main image processing unit or combined with it in which case the combination is generally called a smart camera or smart sensor. Inclusion of the full processing function into the same enclosure as the camera is often referred to as embedded processing. When separated, the connection may be made to specialized intermediate hardware, a custom processing appliance, or a frame grabber within a computer using either an analog or standardized digital interface (Camera Link, CoaXPress). MV implementations also use digital cameras capable of direct connections (without a framegrabber) to a computer via FireWire, USB or Gigabit Ethernet interfaces. While conventional (2D visible light) imaging is most commonly used in MV, alternatives include multispectral imaging, hyperspectral imaging, imaging various infrared bands, line scan imaging, 3D imaging of surfaces and X-ray imaging. Key differentiations within MV 2D visible light imaging are monochromatic vs. color, frame rate, resolution, and whether or not the imaging process is simultaneous over the entire image, making it suitable for moving processes. Though the vast majority of machine vision applications are solved using two-dimensional imaging, machine vision applications utilizing 3D imaging are a growing niche within the industry. The most commonly used method for 3D imaging is scanning based triangulation which utilizes motion of the product or image during the imaging process. A laser is projected onto the surfaces of an object. In machine vision this is accomplished with a scanning motion, either by moving the workpiece, or by moving the camera & laser imaging system. The line is viewed by a camera from a different angle; the deviation of the line represents shape variations. Lines from multiple scans are assembled into a depth map or point cloud. Stereoscopic vision is used in special cases involving unique features present in both views of a pair of cameras. Other 3D methods used for machine vision are time of flight and grid based. One method is grid array based systems using pseudorandom structured light system as employed by the Microsoft Kinect system circa 2012. === Image processing === After an image is acquired, it is processed. Central processing functions are generally done by a CPU, a GPU, a FPGA or a combination of these. Deep learning training and inference impose higher processing performance requirements. Multiple stages of processing are generally used in a sequence that ends up as a desired result. A typical sequence might start with tools such as filters which modify the image, followed by extraction of objects, then extraction (e.g. measurements, reading of codes) of data from those objects, followed by communicating that data, or comparing it against target values to create and communicate "pass/fail" results. Machine vision image processing methods include; Stitching/Registration: Combining of adjacent 2D or 3D images. Filtering (e.g. morphological filtering) Thresholding: Thresholding starts with setting or determining a gray value that will be useful for the following steps. The value is then used to separate portions of the image, and sometimes to transform each portion of the image to simply black and white based on whether it is below or above that grayscale value. Pixel counting: counts the number of light or dark pixels Segmentation: Partitioning a digital image into multiple segments to simplify and/or change the representation of an image into something that is more meaningful and easier to analyze. Edge detection: finding object edges Color Analysis: Identify parts, products and items using color, assess quality from color, and isolate features using color. Blob detection and extraction: inspecting an image for discrete blobs of connected pixels (e.g. a black hole in a grey object) as image landmarks. Neural network / deep learning / machine learning processing: weighted and self-training multi-variable decision making Circa 2019 there is a large expansion of this, using deep learning and machine learning to significantly expand machine vision capabilities. The most common result of such processing is classification. Examples of classification are object identification,"pass fail" classification of identified objects and OCR. Pattern recognition including template matching. Finding, matching, and/or counting specific patterns. This may include location of an object that may be rotated, partially hidden by another object, or varying in size. Barcode, Data Matrix and "2D barcode" reading Optical character recognition: automated reading of text such as serial numbers Gauging/Metrology: measurement of object dimensions (e.g. in pixels, inches or millimeters) Comparison against target values to determine a "pass or fail" or "go/no go" result. For example, with code or bar code verification, the read value is compared to the stored target value. For gauging, a measurement is compared against the proper value and tolerances. For verification of alpha-numberic codes, the
Read more →
ClearForest

ClearForest was an Israeli software company that developed and marketed text analytics and text mining solutions. == History == Founded in 1998, ClearForest had its headquarters just outside Boston and a development center in Or Yehuda. The company was acquired by Reuters in April, 2007. It now markets its services under the names Calais, OpenCalais, and OneCalais. ClearForest was previously venture-backed; its last funding round was led by Greylock Ventures and closed in 2005. Other investors included DB Capital Partners, Pitango, Walden Israel, Booz Allen, JP Morgan Partners and HarbourVest Partners. On February 7, 2008 Reuters announced the launch of Open Calais, a named-entity recognition and semantic analysis service that uses ClearForest technology. On April 30, 2007, Reuters announced that it would acquire ClearForest. Sources estimate the acquisition to be for $25 Million. == Solutions and products == ClearForest offers several hosted solutions, including: OpenCalais, a free web service and open API (for commercial and non-commercial use) that performs named-entity recognition and enables automatic metadata generation using the ClearForest financial module. Semantic Web Services (SWS), an on-demand service that makes ClearForest's natural language processing tools available as a standard web service. A subset of ClearForest's capabilities is available via SWS at no cost. Gnosis, a free Firefox extension that uses SWS to analyze the content of a web page. Gnosis identifies named entities such as people, companies, organizations, geographies and products on the page being viewed. Gnosis also automatically processes pages from Wikipedia, providing additional links for people, geographies and other entities which were not explicitly linked within the subject article. Harvest, a real-time machine-readable news service that uses SWS to process a company's news and document feeds and return machine-readable information about people, companies, locations and over 200 other entities facts and events. ClearForest also offers Text Analytics solutions targeted at specific business problems, including: Equity valuation for hedge funds and alternative investments firms Metadata & database creation for publishers and information providers/services Tapping "voice of customer" for market and survey research firms Quality Early Warning for vehicle, capital equipment & durable goods manufacturers
Read more →
Behavior-based robotics

Behavior-based robotics (BBR) or behavioral robotics is an approach in robotics that focuses on robots that are able to exhibit complex-appearing behaviors despite little internal variable state to model its immediate environment, mostly gradually correcting its actions via sensory-motor links. == Principles == Behavior-based robotics sets itself apart from traditional artificial intelligence by using biological systems as a model. Classic artificial intelligence typically uses a set of steps to solve problems, it follows a path based on internal representations of events compared to the behavior-based approach. Rather than use preset calculations to tackle a situation, behavior-based robotics relies on adaptability. This advancement has allowed behavior-based robotics to become commonplace in researching and data gathering. Most behavior-based systems are also reactive, which means they need no programming of what a chair looks like, or what kind of surface the robot is moving on. Instead, all the information is gleaned from the input of the robot's sensors. The robot uses that information to gradually correct its actions according to the changes in immediate environment. Behavior-based robots (BBR) usually show more biological-appearing actions than their computing-intensive counterparts, which are very deliberate in their actions. A BBR often makes mistakes, repeats actions, and appears confused, but can also show the anthropomorphic quality of tenacity. Comparisons between BBRs and insects are frequent because of these actions. BBRs are sometimes considered examples of weak artificial intelligence, although some have claimed they are models of all intelligence. == Features == Most behavior-based robots are programmed with a basic set of features to start them off. They are given a behavioral repertoire to work with dictating what behaviors to use and when, obstacle avoidance and battery charging can provide a foundation to help the robots learn and succeed. Rather than build world models, behavior-based robots simply react to their environment and problems within that environment. They draw upon internal knowledge learned from their past experiences combined with their basic behaviors to resolve problems. == History == The school of behavior-based robots owes much to work undertaken in the 1980s at the Massachusetts Institute of Technology by Rodney Brooks, who with students and colleagues built a series of wheeled and legged robots utilizing the subsumption architecture. Brooks' papers, often written with lighthearted titles such as "Planning is just a way of avoiding figuring out what to do next", the anthropomorphic qualities of his robots, and the relatively low cost of developing such robots, popularized the behavior-based approach. Brooks' work builds—whether by accident or not—on two prior milestones in the behavior-based approach. In the 1950s, W. Grey Walter, an English scientist with a background in neurological research, built a pair of vacuum tube-based robots that were exhibited at the 1951 Festival of Britain, and which have simple but effective behavior-based control systems. The second milestone is Valentino Braitenberg's 1984 book, "Vehicles – Experiments in Synthetic Psychology" (MIT Press). He describes a series of thought experiments demonstrating how simply wired sensor/motor connections can result in some complex-appearing behaviors such as fear and love. Later work in BBR is from the BEAM robotics community, which has built upon the work of Mark Tilden. Tilden was inspired by the reduction in the computational power needed for walking mechanisms from Brooks' experiments (which used one microcontroller for each leg), and further reduced the computational requirements to that of logic chips, transistor-based electronics, and analog circuit design. A different direction of development includes extensions of behavior-based robotics to multi-robot teams. The focus in this work is on developing simple generic mechanisms that result in coordinated group behavior, either implicitly or explicitly.
Read more →
Hard sigmoid

In artificial intelligence, especially computer vision and artificial neural networks, a hard sigmoid is non-smooth function used in place of a sigmoid function. These retain the basic shape of a sigmoid, rising from 0 to 1, but using simpler functions, especially piecewise linear functions or piecewise constant functions. These are preferred where speed of computation is more important than precision. == Examples == The most extreme examples are the sign function or Heaviside step function, which go from −1 to 1 or 0 to 1 (which to use depends on normalization) at 0. Other examples include the Theano library, which provides two approximations: ultra_fast_sigmoid, which is a multi-part piecewise approximation and hard_sigmoid, which is a 3-part piecewise linear approximation (output 0, line with slope 0.2, output 1).
Read more →
Powerset (company)

Powerset was an American company based in San Francisco, California, that, in 2006, was developing a natural language search engine for the Internet. On July 1, 2008, Powerset was acquired by Microsoft for an estimated $100 million (~$143 million in 2024). Powerset was working on building a natural language search engine that could find targeted answers to user questions (as opposed to keyword based search). For example, when confronted with a question like "Which U.S. state has the highest income tax?", conventional search engines ignore the question phrasing and instead do a search on the keywords "state", "highest", "income", and "tax". Powerset on the other hand, attempts to use natural language processing to understand the nature of the question and return pages containing the answer. The company was in the process of "building a natural language search engine that reads and understands every sentence on the Web". The company has licensed natural language technology from PARC, the former Xerox Palo Alto Research Center. On May 11, 2008, the company unveiled a tool for searching a fixed subset of English Wikipedia using conversational phrases rather than keywords. Acquisition by Microsoft: One significant milestone in Powerset's history was its acquisition by Microsoft on July 1, 2008, for an estimated $100 million. This acquisition was part of Microsoft's broader strategy to enhance its search capabilities and compete more effectively with other search engine providers, particularly Google. Natural Language Search Engine: Powerset's primary focus was on developing a natural language search engine capable of understanding and interpreting user queries in a more human-like manner. Instead of simply matching keywords, Powerset aimed to comprehend the meaning behind the words, allowing for more accurate and contextually relevant search results. Technology and Partnerships: Powerset had licensed natural language technology from PARC, the Xerox Palo Alto Research Center. This technology likely played a crucial role in the development of Powerset's NLP capabilities. Wikipedia Search Tool: In May 2008, Powerset unveiled a search tool that allowed users to search a fixed subset of English Wikipedia using conversational phrases rather than traditional keywords. This demonstrated the potential of Powerset's NLP technology in providing more precise and relevant search results. == Powerlabs == In a form of beta testing, Powerset opened an online community called Powerlabs on September 17, 2007. Business Week said: "The company hopes the site will marshal thousands of people to help build and improve its search engine before it goes public next year." Said The New York Times: "[Powerset Labs] goes far beyond the 'alpha' or 'beta' testing involved in most software projects, when users put a new product through rigorous testing to find its flaws. Powerset doesn’t have a product yet, but rather a collection of promising natural language technologies, which are the fruit of years of research at Xerox PARC." Powerlabs' initial search results are taken from Wikipedia. == Notable people == Barney Pell (born March 18, 1968, in Hollywood, California) was co-founder and CEO of Powerset. Pell received his Bachelor of Science degree in symbolic systems from Stanford University in 1989, where he graduated Phi Beta Kappa and was a National Merit Scholar. Pell received a PhD in computer science from Cambridge University in 1993, where he was a Marshall Scholar. He has worked at NASA, as chief strategist and vice president of business development at StockMaster.com (acquired by Red Herring in March, 2000) and at Whizbang! Labs. Prior to joining Powerset, Pell was an Entrepreneur-in-Residence at Mayfield Fund, a venture capital firm in Silicon Valley. Pell is also a founder of Moon Express, Inc., a U.S. company awarded a $10M commercial lunar contract by NASA and a competitor in the Google Lunar X PRIZE. Steve Newcomb was the COO and co-founder of Powerset. Prior to joining Powerset, he was a co-founder of Loudfire, General Manager at Promptu, and was on the board of directors at Jaxtr. He left Powerset in October 2007 to form Virgance, a social startup incubator. Lorenzo Thione (born in Como, Italy) was the product architect and co-founder of Powerset. Prior to joining Powerset, he worked at FXPAL in natural language processing and related research fields. Thione earned his master's degree in software engineering from the University of Texas at Austin. Ronald Kaplan, former manager of research in Natural Language Theory and Technology at PARC, served as the company's CTO and CSO. Ryan Ferrier is a member of the founding team of Powerset. He managed personnel and internal operations. After 2008 he went on to co-found Serious Business, which made Facebook applications and was later bought by Zynga. Another Powerset alumnus, Alex Le, became CTO of Serious Business and went on to become an executive producer at Zynga when it bought the company. Siqi Chen founded a stealth startup in mobile computing after leaving Powerset. Tom Preston-Werner worked at Powerset and left after the acquisition to found GitHub. == Investors == Powerset attracted a wide range of investors, many of whom had considerable experience in the venture capital field. The company received $12.5 million (~$18.2 million in 2024) in Series A funding during November 2007, co-led by the venture capital firms Foundation Capital and The Founders Fund. Among the better-known investors: Esther Dyson, founding chairman of ICANN, founder of the newsletter Release 1.0 and editor at Cnet Peter Thiel, founder and former CEO of PayPal Luke Nosek, founder of PayPal Todd Parker. Managing Partner, Hidden River Ventures Reid Hoffman, executive vice president of PayPal and founder of LinkedIn First Round Capital, seed-stage venture firm
Read more →
Grammar checker

A grammar checker, in computing terms, is a program, or part of a program, that attempts to verify written text for grammatical correctness. Grammar checkers are most often implemented as a feature of a larger program, such as a word processor, but are also available as a stand-alone application that can be activated from within programs that work with editable text. The implementation of a grammar checker makes use of natural language processing. == History == The earliest "grammar checkers" were programs that checked for punctuation and style inconsistencies, rather than a complete range of possible grammatical errors. The first system was called Writer's Workbench, and was a set of writing tools included with Unix systems as far back as the 1970s. The whole Writer's Workbench package included several separate tools to check for various writing problems. The "diction" tool checked for wordy, trite, clichéd or misused phrases in a text. The tool would output a list of questionable phrases and provide suggestions for improving the writing. The "style" tool analyzed the writing style of a given text. It performed a number of readability tests on the text and output the results, and gave some statistical information about the sentences of the text. Aspen Software of Albuquerque, New Mexico released the earliest version of a diction and style checker for personal computers, Grammatik, in 1981. Grammatik was first available for a Radio Shack - TRS-80, and soon had versions for CP/M and the IBM PC. Reference Software International of San Francisco, California, acquired Grammatik in 1985. Development of Grammatik continued, and it became an actual grammar checker that could detect writing errors beyond simple style checking. Other early diction and style checking programs included Punctuation & Style, Correct Grammar, RightWriter and PowerEdit. While all the earliest programs started as simple diction and style checkers, all eventually added various levels of language processing, and developed some level of true grammar checking capability. Until 1992, grammar checkers were sold as add-on programs. There were a large number of different word processing programs available at that time, with WordPerfect and Microsoft Word the top two in market share. In 1992, Microsoft decided to add grammar checking as a feature of Word, and licensed CorrecText, a grammar checker from Houghton Mifflin that had not yet been marketed as a standalone product. WordPerfect answered Microsoft's move by acquiring Reference Software, and the direct descendant of Grammatik is still included with WordPerfect. As of 2019, grammar checkers are built into systems like Google Docs, browser extensions like Grammarly and Qordoba, desktop applications like Ginger, free and open-source software like LanguageTool, and text editor plugins like those available from WebSpellChecker Software. == Technical issues == The earliest writing style programs checked for wordy, trite, clichéd, or misused phrases in a text. This process was based on simple pattern matching. The heart of the program was a list of many hundreds or thousands of phrases that are considered poor writing by many experts. The list of questionable phrases included alternative wording for each phrase. The checking program would simply break text into sentences, check for any matches in the phrase dictionary, flag suspect phrases and show an alternative. These programs could also perform some mechanical checks. For example, they would typically flag doubled words, doubled punctuation, some capitalization errors, and other simple mechanical mistakes. True grammar checking is more complex. While a programming language has a very specific syntax and grammar, this is not so for natural languages. One can write a somewhat complete formal grammar for a natural language, but there are usually so many exceptions in real usage that a formal grammar is of minimal help in writing a grammar checker. One of the most important parts of a natural language grammar checker is a dictionary of all the words in the language, along with the part of speech of each word. The fact that a natural word may be used as any one of several parts of speech (such as "free" being used as an adjective, adverb, noun, or verb) greatly increases the complexity of any grammar checker. A grammar checker will find each sentence in a text, look up each word in the dictionary, and then attempt to parse the sentence into a form that matches a grammar. Using various rules, the program can then detect various errors, such as agreement in tense, number, word order, and so on. It is also possible to detect some stylistic problems with the text. For example, some popular style guides such as The Elements of Style deprecate excessive use of the passive voice. Grammar checkers may attempt to identify passive sentences and suggest an active-voice alternative. The software elements required for grammar checking are closely related to some of the development issues that need to be addressed for speech recognition software. In voice recognition, parsing can be used to help predict which word is most likely intended, based on part of speech and position in the sentence. In grammar checking, the parsing is used to detect words that fail to follow accepted grammar usage. Recently, research has focused on developing algorithms which can recognize grammar errors based on the context of the surrounding words. == Criticism == Grammar checkers are considered a type of foreign language writing aid which non-native speakers can use to proofread their writings as such programs endeavor to identify syntactical errors. However, as with other computerized writing aids such as spell checkers, popular grammar checkers are often criticized when they fail to spot errors and incorrectly flag correct text as erroneous. The linguist Geoffrey K. Pullum argued in 2007 that they were generally so inaccurate as to do more harm than good: "for the most part, accepting the advice of a computer grammar checker on your prose will make it much worse, sometimes hilariously incoherent."
Read more →
Roposo

Roposo is an Indian video-sharing social media service, owned by Glance, a subsidiary of InMobi. Roposo provides a space where users can share posts related to different topics like food, comedy, music, poetry, fashion and travel. It is a platform where people express visually with homemade videos and photos. The app offers a TV-like browsing experience with user-generated content on its channels. Users can also use editing tools on the platform and upload their content. == History == Established in July 2014 under Relevant E-solutions Pvt. Ltd., Roposo is the brainchild of three IIT Delhi alumni – Mayank Bhangadia, Avinash Saxena, and Kaushal Shubhank. Under Bhangadia's leadership, the company pivoted from a fashion-based network into a short-form video platform with AI-powered moderation, and its journey was featured as a Harvard Business Publishing case study. In November 2019, Roposo was acquired by InMobi's Glance Digital Experience Pvt. Ltd.(the mobile content platform and part of the InMobi Group). When the Chinese-owned video-sharing app TikTok was banned on 30 June 2020, the app saw a huge spike in users with several TikTok users registering on Roposo. == Technology == The open platform has some features such as a TV-like browsing, different channels, a chat feature that lets buyers and sellers converse directly through the platform, and creation tools such as an option to add voice-over, music and GIF stickers for videos and photos.
Read more →
Association for Computational Linguistics

The Association for Computational Linguistics (ACL) is a scientific and professional organization for people working on natural language processing. Its namesake conference is one of the primary high impact conferences for natural language processing research, along with EMNLP. The conference is held each summer in locations where significant computational linguistics research is carried out. It was founded in 1962, originally named the Association for Machine Translation and Computational Linguistics (AMTCL). It became the ACL in 1968. The ACL has a European (EACL), a North American (NAACL), and an Asian (AACL) chapter. == History == The ACL was founded in 1962 as the Association for Machine Translation and Computational Linguistics (AMTCL). The initial membership was about 100. In 1965, the AMTCL took over the journal Mechanical Translation and Computational Linguistics. This journal was succeeded by many other journals: the American Journal of Computational Linguistics (1974–1978, 1980–1983), and then Computational Linguistics (1984–present). Since 1988, the journal has been published for the ACL by MIT Press. The annual meeting was first held in 1963 in conjunction with the Association for Computing Machinery National Conference. The annual meeting was, for a long time, relatively informal and did not publish anything longer than abstracts. By 1968, the society took on its current name, the Association for Computational Linguistics (ACL). The publication of the annual meeting's Proceedings of the ACL began in 1979 and gradually matured into its modern form. Many of the meetings were held in conjunction with the Linguistic Society of America, and a few with the American Society for Information Science and the Cognitive Science Society. The United States government sponsored much research from 1989 to 1994, characterized by an increase in author retention rates and an increase in research in some key topics, such as speech recognition, in ACL. By the 21st century, it was able to maintain authors at a high rate who coalesced in a more stable arrangement around individual research topics. In 1991, the group published a prototype for a text generator based on the universal grammar theory of Noam Chomsky. The system, nicknamed Parrot, relied on a finite set of syntactic transformations and a hand-curated lexicon. Despite some initial success, including experimentation with morpheme syntactics, funding halted after the research team encountered intractable difficulties with inflection and abstract locutions. == Annual Meeting of the ACL == Every year, the ACL holds the Annual Meeting of the ACL. The location lies in Europe in years zero modulo three, North America in years one modulo three, and Asia–Australia in years two modulo three. In 2020, the Annual Meeting received for the first time more submissions from China than the United States. == Activities == The ACL organizes several of the top conferences and workshops in the field of computational linguistics and natural language processing. These include: Annual Meeting of the Association for Computational Linguistics (ACL), the flagship conference of the organization Empirical Methods in Natural Language Processing (EMNLP) International Joint Conference on Natural Language Processing (IJCNLP), held jointly one of the other conferences on a rotating basis Conference on Computational Natural Language Learning (CoNLL) Lexical and Computational Semantics and Semantic Evaluation (SemEval) Joint Conference on Lexical and Computational Semantics (SEM) Workshop on Statistical Machine Translation (WMT) Besides conferences, the ACL also sponsors the journals Computational Linguistics and Transactions of the Association for Computational Linguistics (TACL). Papers and other presentations at ACL and ACL-affiliated venues are archived online in the open-access ACL Anthology. == Special Interest Groups == ACL has a large number of Special Interest Groups (SIGs), focusing on specific areas of natural language processing. Some current SIGs within ACL are: == Presidents == Each year, the ACL elects a distinguished computational linguist who becomes vice-president of the organization in the next calendar year and president one year later. Recent ACL presidents are:
Read more →
AUTINDEX

AUTINDEX is a commercial text mining software package based on sophisticated linguistics. AUTINDEX, resulting from research in information extraction, is a product of the Institute of Applied Information Sciences (IAI) which is a non-profit institute that has been researching and developing language technology since its foundation in 1985. IAI is an institute affiliated to Saarland University in Saarbrücken, Germany. AUTINDEX is the result of a number of research projects funded by the EU (Project BINDEX), by Deutsche Forschungsgemeinschaft and the German Ministry for Economy. Amongst the latter there are the projects LinSearch, and WISSMER, see also the reference to IAI-Website. The basic functionality of AUTINDEX is the extraction of key words from a document to represent the semantics of the document. Ideally the system is integrated with a thesaurus that defines the standardised terms to be used for key word assignment. AUTINDEX is used in library applications (e.g. integrated in dandelon.com) as well as in high quality (expert) information systems, and in document management and content management environments. Together with AUTINDEX a number of additional software comes along such as an integration with Apache Solr / Lucene to provide a complete information retrieval environment, a classification and categorisation system on the basis of a machine learning software that assigns domains to the document, and a system for searching with semantically similar terms that are collected in so called tag clouds.
Read more →