AI For Business Owners Course

AI For Business Owners Course — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Geometric hashing

In computer science, geometric hashing is a method for efficiently finding two-dimensional objects represented by discrete points that have undergone an affine transformation, though extensions exist to other object representations and transformations. In an off-line step, the objects are encoded by treating each pair of points as a geometric basis. The remaining points can be represented in an invariant fashion with respect to this basis using two parameters. For each point, its quantized transformed coordinates are stored in the hash table as a key, and indices of the basis points as a value. Then a new pair of basis points is selected, and the process is repeated. In the on-line (recognition) step, randomly selected pairs of data points are considered as candidate bases. For each candidate basis, the remaining data points are encoded according to the basis and possible correspondences from the object are found in the previously constructed table. The candidate basis is accepted if a sufficiently large number of the data points index a consistent object basis. Geometric hashing was originally suggested in computer vision for object recognition in 2D and 3D, but later was applied to different problems such as structural alignment of proteins. == Geometric hashing in computer vision == Geometric hashing is a method used for object recognition. Let’s say that we want to check if a model image can be seen in an input image. This can be accomplished with geometric hashing. The method could be used to recognize one of the multiple objects in a base, in this case the hash table should store not only the pose information but also the index of object model in the base. === Example === For simplicity, this example will not use too many point features and assume that their descriptors are given by their coordinates only (in practice local descriptors such as SIFT could be used for indexing). ==== Training Phase ==== Find the model's feature points. Assume that 5 feature points are found in the model image with the coordinates ( 12 , 17 ) ; {\displaystyle (12,17);} ( 45 , 13 ) ; {\displaystyle (45,13);} ( 40 , 46 ) ; {\displaystyle (40,46);} ( 20 , 35 ) ; {\displaystyle (20,35);} ( 35 , 25 ) {\displaystyle (35,25)} , see the picture. Introduce a basis to describe the locations of the feature points. For 2D space and similarity transformation the basis is defined by a pair of points. The point of origin is placed in the middle of the segment connecting the two points (P2, P4 in our example), the x ′ {\displaystyle x'} axis is directed towards one of them, the y ′ {\displaystyle y'} is orthogonal and goes through the origin. The scale is selected such that absolute value of x ′ {\displaystyle x'} for both basis points is 1. Describe feature locations with respect to that basis, i.e. compute the projections to the new coordinate axes. The coordinates should be discretised to make recognition robust to noise, we take the bin size 0.25. We thus get the coordinates ( − 0.75 , − 1.25 ) ; {\displaystyle (-0.75,-1.25);} ( 1.00 , 0.00 ) ; {\displaystyle (1.00,0.00);} ( − 0.50 , 1.25 ) ; {\displaystyle (-0.50,1.25);} ( − 1.00 , 0.00 ) ; {\displaystyle (-1.00,0.00);} ( 0.00 , 0.25 ) {\displaystyle (0.00,0.25)} Store the basis in a hash table indexed by the features (only transformed coordinates in this case). If there were more objects to match with, we should also store the object number along with the basis pair. Repeat the process for a different basis pair (Step 2). It is needed to handle occlusions. Ideally, all the non-colinear pairs should be enumerated. We provide the hash table after two iterations, the pair (P1, P3) is selected for the second one. Hash Table: Most hash tables cannot have identical keys mapped to different values. So in real life one won’t encode basis keys (1.0, 0.0) and (-1.0, 0.0) in a hash table. ==== Recognition Phase ==== Find interesting feature points in the input image. Choose an arbitrary basis. If there isn't a suitable arbitrary basis, then it is likely that the input image does not contain the target object. Describe coordinates of the feature points in the new basis. Quantize obtained coordinates as it was done before. Compare all the transformed point features in the input image with the hash table. If the point features are identical or similar, then increase the count for the corresponding basis (and the type of object, if any). For each basis such that the count exceeds a certain threshold, verify the hypothesis that it corresponds to an image basis chosen in Step 2. Transfer the image coordinate system to the model one (for the supposed object) and try to match them. If successful, the object is found. Otherwise, go back to Step 2. === Finding mirrored pattern === It seems that this method is only capable of handling scaling, translation, and rotation. However, the input image may contain the object in mirror transform. Therefore, geometric hashing should be able to find the object, too. There are two ways to detect mirrored objects. For the vector graph, make the left side positive, and the right side negative. Multiplying the x position by -1 will give the same result. Use 3 points for the basis. This allows detecting mirror images (or objects). Actually, using 3 points for the basis is another approach for geometric hashing. === Geometric hashing in higher-dimensions === Similar to the example above, hashing applies to higher-dimensional data. For three-dimensional data points, three points are also needed for the basis. The first two points define the x-axis, and the third point defines the y-axis (with the first point). The z-axis is perpendicular to the created axis using the right-hand rule. Notice that the order of the points affects the resulting basis
Read more →
Information seeking

Information seeking is the process or activity of attempting to obtain information in both human and technological contexts. Information seeking is related to, but different from, information retrieval (IR). == Compared to information retrieval == Traditionally, IR tools have been designed for IR professionals to enable them to effectively and efficiently retrieve information from a source. It is assumed that the information exists in the source and that a well-formed query will retrieve it (and nothing else). It has been argued that laypersons' information seeking on the internet is very different from information retrieval as performed within the IR discourse. Yet, internet search engines are built on IR principles. Since the late 1990s a body of research on how casual users interact with internet search engines has been forming, but the topic is far from fully understood. IR can be said to be technology-oriented, focusing on algorithms and issues such as precision and recall. Information seeking may be understood as a more human-oriented and open-ended process than information retrieval. In information seeking, one does not know whether there exists an answer to one's query, so the process of seeking may provide the learning required to satisfy one's information need. == In different contexts == Much library and information science (LIS) research has focused on the information-seeking practices of practitioners within various fields of professional work. Studies have been carried out into the information-seeking behaviors of librarians, academics, medical professionals, engineers, lawyers and mini-publics(among others). Much of this research has drawn on the work done by Leckie, Pettigrew (now Fisher) and Sylvain, who in 1996 conducted an extensive review of the LIS literature (as well as the literature of other academic fields) on professionals' information seeking. The authors proposed an analytic model of professionals' information seeking behaviour, intended to be generalizable across the professions, thus providing a platform for future research in the area. The model was intended to "prompt new insights... and give rise to more refined and applicable theories of information seeking" (1996, p. 188). The model has been adapted by Wilkinson (2001) who proposes a model of the information seeking of lawyers. Recent studies in this topic address the concept of information-gathering that "provides a broader perspective that adheres better to professionals' work-related reality and desired skills." (Solomon & Bronstein, 2021). == Theories of information-seeking behavior == A variety of theories of information behavior – e.g. Zipf's Principle of Least Effort, Brenda Dervin's Sense Making, Elfreda Chatman's Life in the Round – seek to understand the processes that surround information seeking. In addition, many theories from other disciplines have been applied in investigating an aspect or whole process of information seeking behavior. A review of the literature on information seeking behavior shows that information seeking has generally been accepted as dynamic and non-linear (Foster, 2005; Kuhlthau 2006). People experience the information search process as an interplay of thoughts, feelings and actions (Kuhlthau, 2006). Donald O. Case (2007) also wrote a good book that is a review of the literature. Information seeking has been found to be linked to a variety of interpersonal communication behaviors beyond question-asking, to include strategies such as candidate answers. Robinson's (2010) research suggests that when seeking information at work, people rely on both other people and information repositories (e.g., documents and databases), and spend similar amounts of time consulting each (7.8% and 6.4% of work time, respectively; 14.2% in total). However, the distribution of time among the constituent information seeking stages differs depending on the source. When consulting other people, people spend less time locating the information source and information within that source, similar time understanding the information, and more time problem solving and decision making, than when consulting information repositories. Furthermore, the research found that people spend substantially more time receiving information passively (i.e., information that they have not requested) than actively (i.e., information that they have requested), and this pattern is also reflected when they provide others with information. == Wilson's nested model of conceptual areas == The concepts of information seeking, information retrieval, and information behaviour are objects of investigation of information science. Within this scientific discipline a variety of studies has been undertaken analyzing the interaction of an individual with information sources in case of a specific information need, task, and context. The research models developed in these studies vary in their level of scope. Wilson (1999) therefore developed a nested model of conceptual areas, which visualizes the interrelation of the here mentioned central concepts. Wilson defines models of information behavior to be "statements, often in the form of diagrams, that attempt to describe an information-seeking activity, the causes and consequences of that activity, or the relationships among stages in information-seeking behaviour" (1999: 250).
Read more →
Documentation science

Documentation science is the study of the recording and retrieval of information. It includes methods for storing, retrieving, and sharing of information captured on physical as well as digital documents. This field is closely linked to the fields of library science and information science but has its own theories and practices. The term documentation science was coined by Belgian lawyer and peace activist Paul Otlet. He is considered to be the forefather of information science. He along with Henri La Fontaine laid the foundations of documentation science as a field of study. Professionals in this field are called documentalists. Over the years, documentation science has grown to become a large and important field of study. Evolving from traditional practices like archiving and retrieval to modern theories about the nature of documents, novel methods for organizing digital information, and applications in libraries, research, healthcare, business, and technology and more. This field continues to evolve in the digital age. == Developments in documentation science == 1895: The International Institute of Bibliography (originally Institut International de Bibliographie, IIB) was established on 12 September 1895, in Brussels, Belgium by Paul Otlet and Henri La Fontaine. It aimed to catalog all recorded knowledge using a universal classification system now known as the Universal Decimal Classification (UDC). 1931: International Institute of Bibliography (originally Institut International de Bibliographie, IIB) was renamed The International Institute for Documentation, (Institut International de Documentation, IID). 1934: Paul Otlet envisioned a “radiated library,” a global network of interconnected documents accessible from anywhere via telecommunication. This early idea is now seen as a forerunner of the internet. 1937: American Documentation Institute was founded (1968 nameshift to American Society for Information Science). 1951: Suzanne Briet published Qu'est-ce que la documentation? where she proposed that “a document is evidence in support of a fact,” expanding the definition to include objects such as animals in zoos when they are part of a scientific study. This was a significant theoretical shift in defining documents. 1965-1990: Documentation departments were established, for example, large research libraries, online computer retrieval systems and more. The persons doing the searches were called documentalists. But with the appearance of first CD-ROM databases in the mid-1980s and later the internet in 1990s, these intermediary searches decreased and most such departments closed or merged with other departments. 1996: "Dokvit", Documentation Studies, was established in 1996 at the University of Tromsø in Norway. 2001: The Document Academy was established. It is an international network that celebrates documentation. It was conducted by The Program of Documentation Studies, University of Tromsø, Norway and The School of Information Management and Systems, UC Berkeley. 2003: The first Document Research Conference (DOCAM), a series of conferences made by the Document Academy. DOCAM '03 (2003) was held 13–15 August 2003 at The School of Information Management and Systems (SIMS) at the University of California, Berkeley. 2007: Michael Buckland, Ronald Day, and Birger Hjørland expanded the theoretical foundations of documentation science. They researched and explored documents to be social artifacts, the role of ideology in classification, and how documents influenced knowledge systems. 2010s: The concept of post-documentation or “documentality” began in the 2010s, which focused on how digital traces (e.g., tweets, logs) function as documents without traditional physical form. This led to new thinking in document theory. 2016–present: The Document Academy's DOCAM conferences have continued, offering ongoing developments in the theory and practice of documentation. Themes include affect, memory, activism, and born-digital records. 2017: The journal Information Research published special issues addressing “document theory,” including views on documentation in virtual environments and digital archives. 2020–present: The growth of research data management (RDM) and open science has made documentation practices central to data sharing, metadata standards, and reproducibility in scientific work. == Theoretical foundations == Documentation science has some deep theories that explain what a document is, how people use documents, and how they are organized. These concepts were introduced by scholars who have not only studied libraries, but also philosophy, language, and social sciences. Suzanne Briet described a document as “any material form of evidence” that is made to be used as proof or to share information. An antelope in a zoo, for example, can be a document because it is being studied, classified, and described. Documents are not just things or materials but are also shaped by society. Michael Buckland noted that documents have meaning only when people agree they are useful or valid as information. He explained a document becomes a document when someone decides to use it as evidence. Ronald Day wrote about how documentation is not neutral, it can be influenced by power, ideology, and politics. He claimed that classification systems, like how libraries organize books, are not just technical tools. They also show what kinds of knowledge are seen as more important than others. In recent years, new theories have been introduced, like “documentality” by Maurizio Ferraris. He proposed that a document does not have to be a paper or file, it can also be something digital like a tweet, a database entry, or a log file, as long as it leaves a trace that can be looked at later. This theory helps explain modern digital documents. == Methodologies and practice == Documentation science includes many methods that help people collect, organize, store, and find information. These practices are used in libraries, archives, research labs, companies, and now also in online systems. === Collecting and creating documents === In the past, documentation work included gathering books, articles, reports, and other printed materials. People created records of these materials manually, using catalog cards, indexes, or bibliographies. Paul Otlet’s work with the Universal Bibliographic Repertory is one example. He created millions of card entries to organize knowledge from around the world. Today, documents are not only created by humans. Computers and machines also generate documents, like log files, metadata, and sensor data. These need new tools and methods for collection and management. === Organizing information === Organizing documents has always been a foundational element of documentation science. Methods like classification (dividing things into groups) and indexing (making lists of topics or keywords) help individuals find what they need. A widely used system is the Universal Decimal Classification (UDC) developed by Otlet and La Fontaine. Another is the Library of Congress Classification (LCC) used in the majority of U.S. libraries. Indexing can be performed by humans or by software programs that read the text and add tags to documents. Metadata is also used to describe documents. Metadata is “data about data” like the title, author, date, and subject of a document. Standards like Dublin Core are used in digital libraries to keep metadata consistent. === Retrieval and access === One of the main objectives of documentation is helping users find the right document. This is called information retrieval. In the past, this meant using catalog drawers or printed indexes. Today, people use search engines, databases, and digital libraries. Modern retrieval tools use Boolean logic, ranking algorithms, and sometimes machine learning to show the most useful results first. This is part of what is studied in both documentation science and information retrieval. === Preservation and archiving === Documents require long-term storage. This is called preservation of documents. Printed documents can be damaged by light, pests, or even time on the other hand digital documents can be deemed worthless if formats become outdated or storage facilities fail. Archivists use methods like migration, which includes moving files to new formats, and emulation, which replicates obsolete systems, to preserve materials. These methods and tools are ever changing as new technologies develop. But the main objective of documentation has remained the same, which is to keep information safe, organized, and easy to find. == Documentation in the digital age == With the expansion of the internet, computers, and cloud storage, documents are no longer just books, papers, or reports. They can now be emails, tweets, videos, websites, databases, or even log files created by machines. === Born-digital documents === Many documents today are created directly in digital form. These are called born-digit
Read more →
Online public access catalog

The online public access catalog (OPAC), now frequently synonymous with library catalog, is an online database of materials held by a library or group of libraries. Online catalogs have largely replaced the analog card catalogs previously used in libraries. == History == === Early online === Although a handful of experimental systems existed as early as the 1960s, the first large-scale online catalogs were developed at Ohio State University in 1975 and the Dallas Public Library in 1978. These and other early online catalog systems tended to closely reflect the card catalogs that they were intended to replace. Using a dedicated terminal or telnet client, users could search a handful of pre-coordinate indexes and browse the resulting display in much the same way they had previously navigated the card catalog. Throughout the 1980s, the number and sophistication of online catalogs grew. The first commercial systems appeared, and would by the end of the decade largely replace systems built by libraries themselves. Library catalogs began providing improved search mechanisms, including Boolean and keyword searching, as well as ancillary functions, such as the ability to place holds on items that had been checked-out. At the same time, libraries began to develop applications to automate the purchase, cataloging, and circulation of books and other library materials. These applications, collectively known as an integrated library system (ILS) or library management system, included an online catalog as the public interface to the system's inventory. Most library catalogs are closely tied to their underlying ILS system. === Stagnation and dissatisfaction === The 1990s saw a relative stagnation in the development of online catalogs. Although the earlier character-based interfaces were replaced with ones for the Web, both the design and the underlying search technology of most systems did not advance much beyond that developed in the late 1980s. At the same time, organizations outside of libraries began developing more sophisticated information retrieval systems. Web search engines like Google and popular e-commerce websites such as Amazon.com provided simpler to use (yet more powerful) systems that could provide relevancy ranked search results using probabilistic and vector-based queries. Prior to the widespread use of the Internet, the online catalog was often the first information retrieval system library users ever encountered. Now accustomed to web search engines, newer generations of library users have grown increasingly dissatisfied with the complex (and often arcane) search mechanisms of older online catalog systems. This has, in turn, led to vocal criticisms of these systems within the library community itself, and in recent years to the development of newer (often termed 'next-generation') catalogs. === Next-generation catalogs === Newer generations of library catalog systems, typically called discovery systems (or a discovery layer), are distinguished from earlier OPACs by their use of more sophisticated search technologies, including relevancy ranking and faceted search, as well as features aimed at greater user interaction and participation with the system, including tagging and reviews. These new features rely heavily on existing metadata which may be poor or inconsistent, particularly for older records. Newer catalog platforms may be independent of the organization's integrated library system (ILS), instead providing drivers that allow for the synchronization of data between the two systems. While the original online catalog interfaces were almost exclusively built by ILS vendors, libraries have increasingly sought next-generation catalogs built by enterprise search companies and open-source software projects, often led by libraries themselves. == Union catalogs == Although library catalogs typically reflect the holdings of a single library, they can also contain the holdings of a group or consortium of libraries. These systems, known as union catalogs, are usually designed to aid the borrowing of books and other materials among the member institutions via interlibrary loan. Examples of this type of catalogs include COPAC, SUNCAT, NLA Trove, and WorldCat—the last catalogs the collections of libraries worldwide. == Related systems == There are a number of systems that share much in common with library catalogs, but have traditionally been distinguished from them. Libraries utilize these systems to search for items not traditionally covered by a library catalog, although these systems are sometimes integrated into a more comprehensive discovery system. Bibliographic databases—such as Medline, ERIC, PsycINFO, Scopus, Web of Science, and many others—index journal articles and other research data. There are also a number of applications aimed at managing documents, photographs, and other digitized or born-digital items such as Digital Commons and DSpace. Particularly in academic libraries, these systems (often known as digital library systems or institutional repository systems) assist with efforts to preserve documents created by faculty and students. Electronic resource management helps librarians to track selection, acquisition, and licensing of a library's electronic information resources.
Read more →
Ultra Hal

Ultra Hal is a chatbot intended to function as a virtual assistant. It was developed by Zabaware, Inc. Ultra Hal uses a natural language interface with animated characters using speech synthesis. Users can communicate with the chatterbot via typing or via a speech recognition engine. It utilizes the WordNet lexical dictionary. Its name is an allusion to HAL 9000, the artificial intelligence from the movie 2001: A Space Odyssey. Ultra Hal won the 2007 Loebner Prize for "most human" chatterbot.
Read more →
Concordance (publishing)

A concordance is an alphabetical list of the principal words used in a book or body of work, listing every instance of each word with its immediate context. Historically, concordances have been compiled only for works of special importance, such as the Vedas, Bible, Qur'an or the works of Shakespeare, James Joyce or classical Latin and Greek authors, because of the time, difficulty, and expense involved in creating a concordance in the pre-computer era. A concordance is more than an index, with additional material such as commentary, definitions and topical cross-indexing which makes producing one a labor-intensive process even when assisted by computers. In the precomputing era, search technology was unavailable, and a concordance offered readers of long works such as the Bible something comparable to search results for every word that they would have been likely to search for. Today, the ability to combine the result of queries concerning multiple terms (such as searching for words near other words) has reduced interest in concordance publishing. In addition, mathematical techniques such as latent semantic indexing have been proposed as a means of automatically identifying linguistic information based on word context. A bilingual concordance is a concordance based on aligned parallel text. A topical concordance is a list of subjects that a book covers (usually The Bible), with the immediate context of the coverage of those subjects. Unlike a traditional concordance, the indexed word does not have to appear in the verse. The best-known topical concordance is Nave's Topical Bible. The first Bible concordance was compiled for the Vulgate Bible by Hugh of St Cher (d.1262), who employed 500 friars to assist him. In 1448, Rabbi Mordecai Nathan completed a concordance to the Hebrew Bible. It took him ten years. A concordance to the Greek New Testament was published in 1546 by Sixt Birck, and the Septuagint was done a by Conrad Kircher in 1602. The first concordance to the English Bible was published in 1550 by John Merbecke. According to Cruden, it did not employ the verse numbers devised by Robert Stephens in 1545, but "the pretty large concordance" of Mr Cotton did. Then followed Cruden's Concordance and Strong's Concordance. == Use in linguistics == Concordances are frequently used in linguistics, when studying a text. For example: comparing different usages of the same word analysing keywords analysing word frequencies finding and analysing phrases and idioms finding translations of subsentential elements, e.g. terminology, in bitexts and translation memories creating indexes and word lists (also useful for publishing) Concordancing techniques are widely used in national text corpora such as American National Corpus (ANC), British National Corpus (BNC), and Corpus of Contemporary American English (COCA) available on-line. Stand-alone applications that employ concordancing techniques are known as concordancers or more advanced corpus managers. Some of them have integrated part-of-speech taggers (POS taggers) and enable the user to create their own POS-annotated corpora to conduct various types of searches adopted in corpus linguistics. == Inversion == The reconstruction of the text of some of the Dead Sea Scrolls involved a concordance. Access to some of the scrolls was governed by a "secrecy rule" that allowed only the original International Team or their designates to view the original materials. After the death of Roland de Vaux in 1971, his successors repeatedly refused to even allow the publication of photographs to other scholars. This restriction was circumvented by Martin Abegg in 1991, who used a computer to "invert" a concordance of the missing documents made in the 1950s which had come into the hands of scholars outside of the International Team, to obtain an approximate reconstruction of the original text of 17 of the documents. This was soon followed by the release of the original text of the scrolls.
Read more →
Jump-and-Walk algorithm

Jump-and-Walk is an algorithm for point location in triangulations (though most of the theoretical analysis were performed in 2D and 3D random Delaunay triangulations). Surprisingly, the algorithm does not need any preprocessing or complex data structures except some simple representation of the triangulation itself. The predecessor of Jump-and-Walk was due to Lawson (1977) and Green and Sibson (1978), which picks a random starting point S and then walks from S toward the query point Q one triangle at a time. But no theoretical analysis was known for these predecessors until after mid-1990s. Jump-and-Walk picks a small group of sample points and starts the walk from the sample point which is the closest to Q until the simplex containing Q is found. The algorithm was a folklore in practice for some time, and the formal presentation of the algorithm and the analysis of its performance on 2D random Delaunay triangulation was done by Devroye, Mucke and Zhu in mid-1990s (the paper appeared in Algorithmica, 1998). The analysis on 3D random Delaunay triangulation was done by Mucke, Saias and Zhu (ACM Symposium of Computational Geometry, 1996). In both cases, a boundary condition was assumed, namely, Q must be slightly away from the boundary of the convex domain where the vertices of the random Delaunay triangulation are drawn. In 2004, Devroye, Lemaire and Moreau showed that in 2D the boundary condition can be withdrawn (the paper appeared in Computational Geometry: Theory and Applications, 2004). Jump-and-Walk has been used in many famous software packages, e.g., QHULL, Triangle and CGAL.
Read more →
Enterprise information system

An Enterprise Information System (EIS) is any kind of information system which improves the functions of enterprise business processes through integration. This means typically offering high quality service, dealing with large volumes of data and capable of supporting some large and possibly complex organization or enterprise. An EIS must be able to be used by all parts and all levels of an enterprise. The word enterprise can have various connotations. Frequently the term is used only to refer to very large organizations such as multi-national companies or public-sector organizations. However, the term may be used to mean virtually anything, by virtue of it having become a corporate-speak buzzword. == Purpose == Enterprise information systems provide a technology platform that enables organizations to integrate and coordinate their business processes on a robust foundation. An EIS is currently used in conjunction with customer relationship management and supply chain management to automate business processes. An enterprise information system provides a single system that is central to the organization that ensuring information can be shared across all functional levels and management hierarchies. An EIS can be used to increase business productivity and reduce service cycles, product development cycles and marketing life cycles. It may be used to amalgamate existing applications. Other outcomes include higher operational efficiency and cost savings. Financial value is not usually a direct outcome from the implementation of an enterprise information system. == Design stage == At the design stage the main characteristic of EIS efficiency evaluation is the probability of timely delivery of various messages such as command, service, etc. == Information systems == Enterprise systems create a standard data structure and are invaluable in eliminating the problem of information fragmentation caused by multiple information systems within an organization. An EIS differentiates itself from legacy systems in that it is self-transactional, self-helping and adaptable to general and specialist conditions. Unlike an enterprise information system, legacy systems are limited to department-wide communications. A typical enterprise information system would be housed in one or more data centers, would run enterprise software, and could include applications that typically cross organizational borders such as content management systems.
Read more →
Highway network

In machine learning, the Highway Network was the first working very deep feedforward neural network with hundreds of layers, much deeper than previous neural networks. It uses skip connections modulated by learned gating mechanisms to regulate information flow, inspired by long short-term memory (LSTM) recurrent neural networks. The advantage of the Highway Network over other deep learning architectures is its ability to overcome or partially prevent the vanishing gradient problem, thus improving its optimization. Gating mechanisms are used to facilitate information flow across the many layers ("information highways"). Highway Networks have found use in text sequence labeling and speech recognition tasks. In 2014, the state of the art was training deep neural networks with 20 to 30 layers. Stacking too many layers led to a steep reduction in training accuracy, known as the "degradation" problem. In 2015, two techniques were developed to train such networks: the Highway Network (published in May), and the residual neural network, or ResNet (December). ResNet behaves like an open-gated Highway Net. == Model == The model has two gates in addition to the H ( W H , x ) {\displaystyle H(W_{H},x)} gate: the transform gate T ( W T , x ) {\displaystyle T(W_{T},x)} and the carry gate C ( W C , x ) {\displaystyle C(W_{C},x)} . The latter two gates are non-linear transfer functions (specifically sigmoid by convention). The function H {\displaystyle H} can be any desired transfer function. The carry gate is defined as: C ( W C , x ) = 1 − T ( W T , x ) {\displaystyle C(W_{C},x)=1-T(W_{T},x)} while the transform gate is just a gate with a sigmoid transfer function. == Structure == The structure of a hidden layer in the Highway Network follows the equation: y = H ( x , W H ) ⋅ T ( x , W T ) + x ⋅ C ( x , W C ) = H ( x , W H ) ⋅ T ( x , W T ) + x ⋅ ( 1 − T ( x , W T ) ) {\displaystyle {\begin{aligned}y=H(x,W_{H})\cdot T(x,W_{T})+x\cdot C(x,W_{C})\\=H(x,W_{H})\cdot T(x,W_{T})+x\cdot (1-T(x,W_{T}))\end{aligned}}} == Related work == Sepp Hochreiter analyzed the vanishing gradient problem in 1991 and attributed to it the reason why deep learning did not work well. To overcome this problem, Long Short-Term Memory (LSTM) recurrent neural networks have residual connections with a weight of 1.0 in every LSTM cell (called the constant error carrousel) to compute y t + 1 = F ( x t ) + x t {\textstyle y_{t+1}=F(x_{t})+x_{t}} . During backpropagation through time, this becomes the residual formula y = F ( x ) + x {\textstyle y=F(x)+x} for feedforward neural networks. This enables training very deep recurrent neural networks with a very long time span t. A later LSTM version published in 2000 modulates the identity LSTM connections by so-called "forget gates" such that their weights are not fixed to 1.0 but can be learned. In experiments, the forget gates were initialized with positive bias weights, thus being opened, addressing the vanishing gradient problem. As long as the forget gates of the 2000 LSTM are open, it behaves like the 1997 LSTM. The Highway Network of May 2015 applies these principles to feedforward neural networks. It was reported to be "the first very deep feedforward network with hundreds of layers". It is like a 2000 LSTM with forget gates unfolded in time, while the later Residual Nets have no equivalent of forget gates and are like the unfolded original 1997 LSTM. If the skip connections in Highway Networks are "without gates," or if their gates are kept open (activation 1.0), they become Residual Networks. The residual connection is a special case of the "short-cut connection" or "skip connection" by Rosenblatt (1961) and Lang & Witbrock (1988) which has the form x ↦ F ( x ) + A x {\displaystyle x\mapsto F(x)+Ax} . Here the randomly initialized weight matrix A does not have to be the identity mapping. Every residual connection is a skip connection, but almost all skip connections are not residual connections. The original Highway Network paper not only introduced the basic principle for very deep feedforward networks, but also included experimental results with 20, 50, and 100 layers networks, and mentioned ongoing experiments with up to 900 layers. Networks with 50 or 100 layers had lower training error than their plain network counterparts, but no lower training error than their 20 layers counterpart (on the MNIST dataset, Figure 1 in ). No improvement on test accuracy was reported with networks deeper than 19 layers (on the CIFAR-10 dataset; Table 1 in ). The ResNet paper, however, provided strong experimental evidence of the benefits of going deeper than 20 layers. It argued that the identity mapping without modulation is crucial and mentioned that modulation in the skip connection can still lead to vanishing signals in forward and backward propagation (Section 3 in ). This is also why the forget gates of the 2000 LSTM were initially opened through positive bias weights: as long as the gates are open, it behaves like the 1997 LSTM. Similarly, a Highway Net whose gates are opened through strongly positive bias weights behaves like a ResNet. The skip connections used in modern neural networks (e.g., Transformers) are dominantly identity mappings.
Read more →
Document

A document is a written, drawn, presented, or memorialized representation of thought, often the manifestation of non-fictional, as well as fictional, content. The etymology of the word "document" derives from the Latin documentum, which denotes a "teaching" or "lesson": the verb doceō denotes "to teach". Historically, the term "document" was usually used to indicate written proof useful as evidence of a truth or fact. In the Computer Age, the term "document" typically refers to a primarily textual computer file, encompassing its structural and format elements, such as fonts, colors, and images. In the contemporary era, the definition of "document" has expanded beyond its traditional medium, such as paper, to encompass electronic documents as well. History, events, examples, opinions, stories, and creativity can all be expressed in documents. "Documentation" is distinct because it has more denotations than "document". Documents are also distinguished from "realia", which are three-dimensional objects that would otherwise satisfy the definition of "document" because they memorialize or represent thought. Documents are usually considered to be two-dimensional representations. == Abstract definitions == The concept of "document" has been defined by Suzanne Briet as "any concrete or symbolic indication, preserved or recorded, for reconstructing or for proving a phenomenon, whether physical or mental." An often-cited article concludes that "the evolving notion of document" among Jonathan Priest, Paul Otlet, Briet, Walter Schürmeyer, and the other documentalists increasingly emphasized whatever functioned as a document rather than traditional physical forms of documents. The shift to digital technology would seem to make this distinction even more important. David M. Levy has said that an emphasis on the technology of digital documents has impeded our understanding of digital documents as documents. A conventional document, such as a mail message or a technical report, exists physically in digital technology as a string of bits, as does everything else in a digital environment. As an object of study, it has been made into a document. It has become physical evidence by those who study it. "Document" is defined in library and information science and documentation science as a fundamental, abstract idea: the word denotes everything that may be represented or memorialized to serve as evidence. The classic example provided by Briet is an antelope: "An antelope running wild on the plains of Africa should not be considered a document[;] she rules. But if it were to be captured, taken to a zoo and made an object of study, it has been made into a document. It has become physical evidence being used by those who study it. Indeed, scholarly articles written about the antelope are secondary documents, since the antelope itself is the primary document." This opinion has been interpreted as an early expression of actor–network theory. == Kinds == A document can be structured, like tabular documents, lists, forms, or scientific charts, semi-structured like a book or a newspaper article, or unstructured like a handwritten note. Documents are sometimes classified as secret, private, or public. They may also be described as drafts or proofs. When a document is copied, the source is denominated the "original". Documents are used in numerous fields, e.g.: Academia: manuscript, thesis, paper, journal, chart, and technical drawing Media: mock-up, script, image, photography, and newspaper article Administration, law, and politics: application, brief, certificate, commission, constitutional document, form, gazette, identity document, license, manifesto, summons, census, and white paper Business: invoice, request for proposal, proposal, contract, packing slip, manifest, report (detailed and summary), spreadsheet, material safety data sheet, waybill, bill of lading, financial statement, nondisclosure agreement (NDA), mutual nondisclosure agreement, and user guide Geography and planning: topographic map, cadastre, legend, and architectural plan Such standard documents can be drafted based on a template. == Drafting == The page layout of a document is how information is graphically arranged in the space of the document, e.g., on a page. If the appearance of the document is of concern, the page layout is generally the responsibility of a graphic designer. Typography concerns the design of letter and symbol forms and their physical arrangement in the document (see typesetting). Information design concerns the effective communication of information, especially in industrial documents and public signs. Simple textual documents may not require visual design and may be drafted only by an author, clerk, or transcriber. Forms may require a visual design for their initial fields, but not to complete the forms. == Media == Traditionally, the medium of a document was paper and the information was applied to it in ink, either by handwriting (to make a manuscript) or by a mechanical process (e.g., a printing press or laser printer). Today, some short documents also may consist of sheets of paper stapled together. Historically, documents were inscribed with ink on papyrus (starting in ancient Egypt) or parchment; scratched as runes or carved on stone using a sharp tool, e.g., the Tablets of Stone described in the Bible; stamped or incised in clay and then baked to make clay tablets, e.g., in the Sumerian and other Mesopotamian civilizations. The papyrus or parchment was often rolled into a scroll or cut into sheets and bound into a codex (book). Contemporary electronic means of memorializing and displaying documents include: Monitor of a desktop computer, laptop, tablet; optionally with a printer to produce a hard copy; Personal digital assistant; Dedicated e-book device; Electronic paper, typically, using the Portable Document Format (PDF); Information appliance; Digital audio player; and Radio and television service provider. Digital documents usually require a specific file format to be presentable in a specific medium. == In law == Documents in all forms frequently serve as material evidence in criminal and civil proceedings. The forensic analysis of such a document is within the scope of questioned document examination. To catalog and manage the large number of documents that may be produced during litigation, Bates numbering is often applied to all documents in the lawsuit so that each document has a unique, arbitrary, identification number.
Read more →
Virtual data room

A virtual data room (sometimes called a VDR or Deal Room) is an online repository of information that is used for the storing and distribution of documents. In many cases, a virtual data room is used to facilitate the due diligence process during an M&A transaction, loan syndication, or private equity and venture capital transactions. This due diligence process has traditionally used a physical data room to accomplish the disclosure of documents. For reasons of cost, efficiency and security, virtual data rooms have widely replaced the more traditional physical data room. A virtual data room is an extranet to which the bidders and their advisers are given access via the internet. An extranet is essentially a website with limited controlled access, using a secure log-on supplied by the vendor, which can be disabled at any time, by the vendor, if a bidder withdraws. Much of the information released is confidential and restrictions are applied to the viewer's ability to release this to third parties (by means of forwarding, copying or printing). This can be effectively applied to protect the data using digital rights management. The virtual data room provides access to secure documents for authorized users through a dedicated web site, or through secure agent applications. In the process of mergers and acquisitions the data room is set up as part of the central repository of data relating to companies or divisions being acquired or sold. The data room enables the interested parties to view information relating to the business in a controlled environment where confidentiality can be preserved. Conventionally this was achieved by establishing a supervised, physical data room in secure premises with controlled access. In most cases, with a physical data room, only one bidder team can access the room at a time. A virtual data room is designed to have the same advantages as a conventional data room (controlling access, viewing, copying and printing, etc.) with fewer disadvantages. Due to their increased efficiency, many businesses and industries have moved to using virtual data rooms instead of physical data rooms. In 2006, a spokesperson for a company which sets up virtual deal rooms was reported claiming that the process reduced the bidding process by about thirty days compared to physical data rooms. In the process of startup fundraising, a virtual data room is set up to be a central location for key data, documents, and financials. These are shared with venture capital and angel investors and allows them to streamline due diligence. == Application == Any business dealing with private data can apply VDRs when secure transaction processing is required. This includes financial institutions that need to negotiate confidential customer information without involving third parties. VDRs have traditionally been used for IPOs and real estate asset management. Technology companies may use them to exchange and review code or confidential data needed for operations. The same is true for clients, who entrust their valuable code only to the most qualified people in the organisation. The code is not something that can be printed out and brought in a folder. It resides on a computer and must be used together. VDR can find application in any business that manages data in the form of documents, especially law firms, financial advisers or the B2B sector. The latter work with documents that must always be handled and controlled confidentially, and it is difficult to store them securely when they are on a server that other people can access. In addition, in B2B, it is important to close the deal as quickly as possible: the average sales cycle is one to three months. VDR can be compared to a locked filing cabinet where all those folders and documents are kept. It automates the mathematics of pricing to prevent revenue leakage, and initially integrates CRM to ensure accurate synchronisation of all account data, which is important for B2B in particular and sales in general. While virtual data rooms offer many advantages, they are not suitable for every industry. For example, some governments may decide to continue using physical data rooms for highly confidential information sharing. The damage from potential cyberattacks and data breaches exceeds the benefits offered by virtual data rooms. In such cases, the use of VDRs is not considered. Data breaches have particularly affected the US healthcare system from March 2021 to March 2022 - according to IBM Security the cost of the breach was a record high of $10.1 million.
Read more →
Browsing

Browsing is a kind of orienting strategy. It is supposed to identify something of relevance for the browsing organism. In context of humans, it is a metaphor taken from the animal kingdom. It is used, for example, about people browsing open shelves in libraries, window shopping, or browsing databases or the Internet. In library and information science, it is an important subject, both purely theoretically and as applied science aiming at designing interfaces which support browsing activities for the user. == Definition == In 2011, Birger Hjørland provided the following definition: "Browsing is a quick examination of the relevance of a number of objects which may or may not lead to a closer examination or acquisition/selection of (some of) these objects. It is a kind of orienting strategy that is formed by our "theories", "expectations" and "subjectivity". == Controversies == As with any kind of human psychology, browsing can be understood in biological, behavioral, or cognitive terms on the one hand or in social, historical, and cultural terms on the other hand. In 2007, Marcia Bates researched browsing from "behavioural" approaches, while Hjørland (2011a+b) defended a social view. Bates found that browsing is rooted in our history as exploratory, motile animals hunting for food and nesting opportunities. According to Hjørland (2011a), on the other hand, Marcia Bates' browsing for information about browsing is governed by her behavioral assumptions, while Hjørland's browsing for information about browsing is governed by his socio-cultural understanding of human psychology. In short: Human browsing is based on our conceptions and interests. === Is browsing a random activity? === Browsing is often understood as a random activity. Dictionary.com, for example, has this definition: "to glance at random through a book, magazine, etc.". Hjørland suggests, however, that browsing is an activity that is governed by our metatheories. We may dynamically change our theories and conceptions but when we browse, the activity is governed by the interests, conceptions, priorities and metatheories that we have at that time. Therefore, browsing is not totally random. == Browsing versus analytical search strategies == In 1997, Gary Marchionini wrote: "A fundamental distinction is made between analytical and browsing strategies [...]. Analytical strategies depend on careful planning, the recall of query terms, and iterative query reformulations and examinations of results. Browsing strategies are heuristic and opportunistic and depend on recognizing relevant information. Analytic strategies are batch oriented and half duplex (turn talking) like human conversation, whereas browsing strategies are more interactive, real-time exchanges and collaborations between the information seeker and the information system. Browsing strategies demand a lower cognitive load in advance and a steadier attentional load throughout the information-seeking process. When it comes to Browsing, giblets are amazing." == Orienting strategies == Some sociologists, such as Berger and Zelditch in 1993, Wagner in 1984, and Wagner & Berger in 1985, have used the term "orienting strategies". They find that orienting strategies should be understood as metatheories: "Consider the very large proportion of sociological theory that is in the form of metatheory. It is discussion about theory: about what concepts it should include, about how those concepts should be linked, and about how theory should be studied. Similar to Kuhn’s paradigms, theories of this sort provide guidelines or strategies for understanding social phenomena and suggest the proper orientation of the theorist to these phenomena; they are orienting strategies. Textbooks in theory frequently focus on orienting strategies such as functionalism, exchange, or ethnomethodology." Sociologists thus use metatheories as orienting strategies. We may generalize and say that all people use metatheories as orienting strategies and that this is what direct our attention and also our browsing – also when we are not conscious about it.
Read more →
Neural radiance field

A neural radiance field (NeRF) is a neural field for reconstructing a three-dimensional representation of a scene from two-dimensional images. The NeRF model enables downstream applications of novel view synthesis, scene geometry reconstruction, and obtaining the reflectance properties of the scene. Additional scene properties such as camera poses may also be jointly learned. First introduced in 2020, it has since gained significant attention for its potential applications in computer graphics and content creation. == Algorithm == The NeRF algorithm represents a scene as a radiance field parametrized by a deep neural network (DNN). The network predicts a volume density and view-dependent emitted radiance given the spatial location ( x , y , z ) {\displaystyle (x,y,z)} and viewing direction in Euler angles ( θ , Φ ) {\displaystyle (\theta ,\Phi )} of the camera. By sampling many points along camera rays, traditional volume rendering techniques can produce an image. === Data collection === A NeRF needs to be retrained for each unique scene. The first step is to collect images of the scene from different angles and their respective camera pose. These images are standard 2D images and do not require a specialized camera or software. Any camera is able to generate datasets, provided the settings and capture method meet the requirements for SfM (Structure from Motion). This requires tracking of the camera position and orientation, often through some combination of SLAM, GPS, or inertial estimation. Researchers often use synthetic data to evaluate NeRF and related techniques. For such data, images (rendered through traditional non-learned methods) and respective camera poses are reproducible and error-free. === Training === For each sparse viewpoint (image and camera pose) provided, camera rays are marched through the scene, generating a set of 3D points with a given radiance direction (into the camera). For these points, volume density and emitted radiance are predicted using the multi-layer perceptron (MLP). An image is then generated through classical volume rendering. Because this process is fully differentiable, the error between the predicted image and the original image can be minimized with gradient descent over multiple viewpoints, encouraging the MLP to develop a coherent model of the scene. == Variations and improvements == Early versions of NeRF were slow to optimize and required that all input views were taken with the same camera in the same lighting conditions. These performed best when limited to orbiting around individual objects, such as a drum set, plants or small toys. Since the original paper in 2020, many improvements have been made to the NeRF algorithm, with variations for special use cases. === Fourier feature mapping === In 2020, shortly after the release of NeRF, the addition of Fourier Feature Mapping improved training speed and image accuracy. Deep neural networks struggle to learn high frequency functions in low dimensional domains; a phenomenon known as spectral bias. To overcome this shortcoming, points are mapped to a higher dimensional feature space before being fed into the MLP. γ ( v ) = [ a 1 cos ⁡ ( 2 π B 1 T v ) a 1 sin ⁡ ( 2 π B 1 T v ) ⋮ a m cos ⁡ ( 2 π B m T v ) a m sin ⁡ ( 2 π B m T v ) ] {\displaystyle \gamma (\mathrm {v} )={\begin{bmatrix}a_{1}\cos(2{\pi }{\mathrm {B} }_{1}^{T}\mathrm {v} )\\a_{1}\sin(2\pi {\mathrm {B} }_{1}^{T}\mathrm {v} )\\\vdots \\a_{m}\cos(2{\pi }{\mathrm {B} }_{m}^{T}\mathrm {v} )\\a_{m}\sin(2{\pi }{\mathrm {B} }_{m}^{T}\mathrm {v} )\end{bmatrix}}} Where v {\displaystyle \mathrm {v} } is the input point, B i {\displaystyle \mathrm {B} _{i}} are the frequency vectors, and a i {\displaystyle a_{i}} are coefficients. This allows for rapid convergence to high frequency functions, such as pixels in a detailed image. === Bundle-adjusting neural radiance fields === One limitation of NeRFs is the requirement of knowing accurate camera poses to train the model. Often times, pose estimation methods are not completely accurate, nor is the camera pose even possible to know. These imperfections result in artifacts and suboptimal convergence. So, a method was developed to optimize the camera pose along with the volumetric function itself. Called Bundle-Adjusting Neural Radiance Field (BARF), the technique uses a dynamic low-pass filter (DLPF) to go from coarse to fine adjustment, minimizing error by finding the geometric transformation to the desired image. This corrects imperfect camera poses and greatly improves the quality of NeRF renders. === Multiscale representation === Conventional NeRFs struggle to represent detail at all viewing distances, producing blurry images up close and overly aliased images from distant views. In 2021, researchers introduced a technique to improve the sharpness of details at different viewing scales known as mip-NeRF (comes from mipmap). Rather than sampling a single ray per pixel, the technique fits a gaussian to the conical frustum cast by the camera. This improvement effectively anti-aliases across all viewing scales. mip-NeRF also reduces overall image error and is faster to converge at about half the size of ray-based NeRF. === Learned initializations === In 2021, researchers applied meta-learning to assign initial weights to the MLP. This rapidly speeds up convergence by effectively giving the network a head start in gradient descent. Meta-learning also allowed the MLP to learn an underlying representation of certain scene types. For example, given a dataset of famous tourist landmarks, an initialized NeRF could partially reconstruct a scene given one image. === NeRF in the wild === Conventional NeRFs are vulnerable to slight variations in input images (objects, lighting) often resulting in ghosting and artifacts. As a result, NeRFs struggle to represent dynamic scenes, such as bustling city streets with changes in lighting and dynamic objects. In 2021, researchers at Google developed a new method for accounting for these variations, named NeRF in the Wild (NeRF-W). This method splits the neural network (MLP) into three separate models. The main MLP is retained to encode the static volumetric radiance. However, it operates in sequence with a separate MLP for appearance embedding (changes in lighting, camera properties) and an MLP for transient embedding (changes in scene objects). This allows the NeRF to be trained on diverse photo collections, such as those taken by mobile phones at different times of day. === Relighting === In 2021, researchers added more outputs to the MLP at the heart of NeRFs. The output now included: volume density, surface normal, material parameters, distance to the first surface intersection (in any direction), and visibility of the external environment in any direction. The inclusion of these new parameters lets the MLP learn material properties, rather than pure radiance values. This facilitates a more complex rendering pipeline, calculating direct and global illumination, specular highlights, and shadows. As a result, the NeRF can render the scene under any lighting conditions with no re-training. === Plenoctrees === Although NeRFs had reached high levels of fidelity, their costly compute time made them useless for many applications requiring real-time rendering, such as VR/AR and interactive content. Introduced in 2021, Plenoctrees (plenoptic octrees) enabled real-time rendering of pre-trained NeRFs through division of the volumetric radiance function into an octree. Rather than assigning a radiance direction into the camera, viewing direction is taken out of the network input and spherical radiance is predicted for each region. This makes rendering over 3000x faster than conventional NeRFs. === Sparse Neural Radiance Grid === Similar to Plenoctrees, this method enabled real-time rendering of pretrained NeRFs. To avoid querying the large MLP for each point, this method bakes NeRFs into Sparse Neural Radiance Grids (SNeRG). A SNeRG is a sparse voxel grid containing opacity and color, with learned feature vectors to encode view-dependent information. A lightweight, more efficient MLP is then used to produce view-dependent residuals to modify the color and opacity. To enable this compressive baking, small changes to the NeRF architecture were made, such as running the MLP once per pixel rather than for each point along the ray. These improvements make SNeRG extremely efficient, outperforming Plenoctrees. === Instant NeRFs === In 2022, researchers at Nvidia enabled real-time training of NeRFs through a technique known as Instant Neural Graphics Primitives. An innovative input encoding reduces computation, enabling real-time training of a NeRF, an improvement orders of magnitude above previous methods. The speedup stems from the use of spatial hash functions, which have O ( 1 ) {\displaystyle O(1)} access times, and parallelized architectures which run fast on modern GPUs. == Related techniques == === Plenoxels === Plen
Read more →
The Citation Project

The Citation Project is a series of studies that measure and analyze first-year college writing students' source use and their ability to understand and implement sources within their own writing. The Citation Project reveals students' source-use habits and the issues that can be seen based on their lack of proper citation skills, such as the prevalence of plagiarism, institution policies, and the results of current writing pedagogy. The Citation Project's central findings were first presented at the Conference on College Composition and Communication in 2012. Although The Citation Project originally referred to this single 2012 study, the feedback received led to the conception of the Project as a broader initiative and as a place to gather and publish studies and data relating to student writing habits for the usage of other researches. == Method == The Citation Project's data comes from the work of 20 researchers analyzing 174 first-year composition students' research papers. The student papers studied originated from 16 institutions across the United States of America, including community colleges, public and private universities, denominational colleges, and Ivy Leagues. Researchers used bibliographic coding to aggregate data regarding the type, length, reading level, and usage of students' sources. == Findings == === Student source assessment and use === This study found that students were capable of identifying, locating, and accessing librarian-approved academic sources, most commonly accessing them with the internet. Despite students demonstrating their ability to find appropriate sources, they tend to exclusively cite the first few pages of their sources. Students' use and analysis of their citations are often limited, frequently resorting to patchwriting, directly restating their source's points, and omitting their own interpretations of their reference's ideas. The Citation Project also highlights students' struggle to accurately determine, address, and value their sources' bias, authority, and credibility. According to the Project's researchers' analysis, these habits demonstrate that first-year college writing students minimally engage with their sources and the academic conversations between them. One researcher from the Citation Project, Rebecca Moore Howard, believes these findings do not point towards students being lazy, but is rather a result of a writing pedagogy that prioritizes efficient, product-focused writing. Another interpretation offered by Sandra Jamieson, another researcher from the Citation Project explains their findings as a result of a lack of adherence to Information Learning (IL) Standards. === Pedagogy === A significant focus of The Citation Project is the development of pedagogical practices intended to equip students with writing and research techniques that will set them up for future success. Writers associated with The Citation Project, such as Tricia Serviss, believe that the practices of teachers surrounding academic integrity and writing practices are what form the foundation of how students think about writing and how to engage with assignments throughout their academic career. They also stress the importance of teaching students to effectively engage with sources rather than simply how to correctly cite them. The Citation Project asserts that endowing students with the ability to read, understand, and synthesize a variety of sources in their writing is a skill that will benefit them throughout their academic careers, and that the surface level typographical focus that many writing programs utilize is inadequate. == Plagiarism == One of the areas that The Citation Project also looks at is how students commit plagiarism throughout their writing. Plagiarism tends to be a checkpoint that gives instructors a sense where students' citation skills stand. Findings from The Citation Project reveal that the most common type of plagiarism is patchwriting which is the act of using the same sentence with only changing a couple of words. These types of issues can be seen as a learning curve due to lack of proper training. Student's that commit plagiarism are often unaware. === Policies === Another issue found is that academic plagiarism policies may not benefit a student's growth but may instead obstruct it. Policies against plagiarism tend to be harsh on the student that committed of offense. Even though student plagiarism is often unintentional academic institutions see this behavior as intentional. Student may then face harsh consequences as a result from their lack of citation knowledge. Additionally, higher level institutions assume that new students already have the skill set to avoid plagiarism which may be an unrealistic expectation. == Legacy == === Inspired studies === ==== Parrott and Napier ==== In one study, "Critical Reading and Student Self-Selected Texts: Results of a Collaborative, Explicit Curricular Approach," Jill Parrot and Trenia Napier quoted the Citation Project's findings as evidence that current collegiate writing curriculums are an ineffective means of teaching students how to properly write academic research papers. The researchers accredited current writing pedagogy's lack of emphasis on teaching critical reading skills. Parrott and Napier tested their thesis by seeing if students would produce more academic writing if they partook in a writing course that taught critical reading. Their results mostly went against this hypothesis, finding students who received additional critical reading training only significantly improved in how they integrated their sources. ==== Kocatepe ==== In May Mehtap Kocatep's study, "Reconceptualising the notion of finding information: How undergraduate students construct information as they read-to-write in an academic writing class," Kocatep expresses that she believes current conversations around writing pedagogy, including the Citation Project, operate with the underlying misconception that information is an easily discoverable static entity and its retrieval is an objective, unbiased decision. Kocatepe instead offers the analysis of what students view as valuable information and if it is worth using is influenced by the socially constructed meanings available to writers at the moment. To further examine students' source engagement, Kocatepe did a study on how female university students from the United Arab Emirates find, retrieve, use, and value sources. Kocatepe's results mainly noted students' almost exclusive reliance on using Google to find sources, as well as how students' navigated mainly English-speaking academic conversations as non-native English speakers. ==== Dahlen, Nordstrom-Sanchez, and Graff ==== Dahlen, Nordstrom-Sanchez, and Graff built their study off The Citation Project research in order to explore the attitudes and practices of students in an undergraduate writing course. As the researchers acknowledge, data collected by the Citation Project was the subject of the bulk of their analysis. This study sought to examine undergraduate writing practices tied to source-usage and elucidate any relevant trends. Dahlen, Nordstrom-Sanchez and Graff found that undergraduate writing students were not engaging with outside sources properly. Key issues discussed include lack of engagement with broad source ideas (in favor of picking out quotes), lack of paraphrasing, and inability to link information between multiple sources. ==== Davis ==== Phillip M. Davis based much of the analysis in his study on data gathered by the Citation Project. This study aimed to examine the particular effects web-based research and study had on undergraduate's papers and the replicability of their bibliographies. Davis sought to see how the shift from physical in-person library based research to online, often at-home research changed the function and usability of the bibliography as a form of documenting source usage in a given work. The primary method of analysis involved examining students' bibliographies to see where they were finding information online and how these sources were accessed. A main issue Davis found was "persistency" of URLs used for online citations. He found that only 18% of URL-based citations continued to function (the others either no longer pointing to the correct document or ceasing to exist altogether) within 3 years of their usage by students, and more than half of claimed online citations could not be found in any form. He suggests that this result brings up questions about how web-based citations should be dealt with in a university context.
Read more →
Ordered key–value store

An ordered key–value store (OKVS) is a type of data storage paradigm that can support multi-model databases. An OKVS is an ordered mapping of bytes to bytes. An OKVS will keep the key–value pairs sorted by the key lexicographic order. OKVS systems provides different set of features and performance trade-offs. Most of them are shipped as a library without network interfaces, in order to be embedded in another process. Most OKVS support ACID guarantees. Some OKVS are distributed databases. Ordered key–value stores found their way into many modern database systems including NewSQL database systems. == History == The origin of ordered key–value store stems from the work of Ken Thompson on dbm in 1979. Later in 1991, Berkeley DB was released that featured a B-Tree backend that allowed the keys to stay sorted. Berkeley DB was said to be very fast and made its way into various commercial product. It was included in Python standard library until 2.7. In 2009, Tokyo Cabinet was released that was superseded by Kyoto Cabinet that support both transaction and ordered keys. In 2011, LMDB was created to replace Berkeley DB in OpenLDAP. There is also Google's LevelDB that was forked by Facebook in 2012 as RocksDB. In 2014, WiredTiger, successor of Berkeley DB was acquired by MongoDB and is since 2019 the primary backend of MongoDB database. Other notable implementation of the OKVS paradigm are Sophia and SQLite3 LSM extension. Another notable use of OKVS paradigm is the multi-model database system called ArangoDB based on RocksDB. Some NewSQL databases are supported by ordered key–value stores. JanusGraph, a property graph database, has both a Berkeley DB backend and FoundationDB backend. == Key concepts == === Lexicographic encoding === There are algorithms that encode basic data types (boolean, string, number) and composition of those data types inside sorted containers (tuple, list, vector) that preserve their natural ordering. It is possible to work with an ordered key–value store without having to work directly with bytes. In FoundationDB, it is called the tuple layer. === Range query === Inside an OKVS, keys are ordered, and because of that it is possible to do range queries. A range query retrieves all keys between two specified keys, ensuring that the fetched keys are returned in a sorted order. === Subspaces === === Key composition === One can construct key spaces to build higher level abstractions. The idea is to construct keys, that takes advantage of the ordered nature of the top level key space. When taking advantage of the ordered nature of the key space, one can query ranges of keys that have particular pattern. === Denormalization === Denormalization, as in, repeating the same piece of data in multiple subspace is common practice. It allows to create secondary representation, also called indices, that will allow to speed up queries. == Higher level abstractions == The following abstraction or databases were built on top ordered key–value stores: Timeseries database, Record Database, also known as Row store databases, they behave similarly to what is dubbed RDBMS, Tuple Stores, also known as Triple Store or Quad Store but also Generic Tuple Store, Document database, that mimics MongoDB API, Full-text search Geographic Information Systems Property Graph Versioned Data Vector space database for Approximate Nearest Neighbor All those abstraction can co-exist with the same OKVS database and when ACID is supported, the operations happens with the guarantees offered by the transaction system. == Feature matrix == == Use-cases == OKVS are useful to implement two strategies: optimize a small feature e.g. to make a 10% improvement in read or write latency; the second strategy is to take advantage of the distributed nature of FoundationDB, and TiKV, for which there is no equivalent at very large scale in resilience. Both users need to re-implement the needed high level abstractions, because there are no portable ready-to-use libraries of high-level abstraction. There is still a complex balance, of complexity, maintainability, fine-tuning, and readily available features that makes it still a choice of experts. Sometime more specialized data-structures can be faster than a high-level abstraction on top of an OKVS. Another interest of OKVS paradigm stems from it simple, and versatile interface, that makes it an interesting target for experimental storage algorithms, and data structures.
Read more →