AI Generator With No Limits

AI Generator With No Limits — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Hi uTandem

    Hi uTandem

    Hi uTandem, also known as uTandem, is a free language exchange mobile app. It helps people to connect with other language learners in order to carry out face-to-face language exchange sessions and also offers learners lists of businesses in the field of language learning or language exchange. == Use == Hi uTandem is built around the concept of language exchange, which is a method of language learning based on mutual oral linguistic exchange between partners. Ideally, each partner is a native speaker of the language they are helping their counterpart to learn. The app designed for users to chat with other users and translate messages, find suitable language partners and to locate language schools, bars, cafés and language exchange groups around them. == Team and development == Hi uTandem was released in January, 2016. The initial idea was conceived by Alberto Rodríguez as part of a team of eight Spanish youngsters. Hi uTandem belongs to the company Velvor Tech S.L., founded by the same members and registered in Ronda (Spain). == Reception == Hi uTandem was listed on the Top 4 Apps to Learn Languages list by ElPlural.com and since its launch it has been featured in numerous online and physical sources, including 20 minutos, Europapress, ABC Andalucía and Telefónica's Think Big Blog.

    Read more →
  • Causal Markov condition

    Causal Markov condition

    The Causal Markov (CM) condition states that, conditional on the set of all its direct causes, a node is independent of all variables which are not effects or direct causes of that node. In the event that the structure of a Bayesian network accurately depicts causality, the two conditions are equivalent. This is related to the Markov condition, an assumption made in Bayesian probability theory, that every node in a Bayesian network is conditionally independent of its nondescendants, given its parents. Stated loosely, it is assumed that a node has no bearing on nodes which do not descend from it. In a DAG, this local Markov condition is equivalent to the global Markov condition, which states that d-separations in the graph also correspond to conditional independence relations. This also means that a node is conditionally independent of the entire network, given its Markov blanket. A network may accurately embody the Markov condition without depicting causality, in which case it should not be assumed to embody the causal Markov condition. == Motivation == Statisticians are enormously interested in the ways in which certain events and variables are connected. The precise notion of what constitutes a cause and effect is necessary to understand the connections between them. The central idea behind the philosophical study of probabilistic causation is that causes raise the probabilities of their effects, all else being equal. A deterministic interpretation of causation means that if A causes B, then A must always be followed by B. In this sense, smoking does not cause cancer because some smokers never develop cancer. On the other hand, a probabilistic interpretation simply means that causes raise the probability of their effects. In this sense, changes in meteorological readings associated with a storm do cause that storm, since they raise its probability. (However, simply looking at a barometer does not change the probability of the storm, for a more detailed analysis, see:). == Examples == In a simple view, releasing one's hand from a hammer causes the hammer to fall. However, doing so in outer space does not produce the same outcome, calling into question if releasing one's fingers from a hammer always causes it to fall. A causal graph could be created to acknowledge that both the presence of gravity and the release of the hammer contribute to its falling. However, it would be very surprising if the surface underneath the hammer affected its falling. This essentially states the Causal Markov Condition, that given the existence of gravity the release of the hammer, it will fall regardless of what is beneath it. == Implications == === Dependence and Causation === It follows from the definition that if X and Y are in V and are probabilistically dependent, then either X causes Y, Y causes X, or X and Y are both effects of some common cause Z in V. This definition was seminally introduced by Hans Reichenbach as the Common Cause Principle (CCP). === Screening === It once again follows from the definition that the parents of X screen X from other "indirect causes" of X (parents of Parents(X)) and other effects of Parents(X) which are not also effects of X.

    Read more →
  • ImageNets

    ImageNets

    ImageNets is an open source framework for rapid prototyping of machine vision algorithms, developed by the Institute of Automation. == Description == ImageNets is an open source and platform independent (Windows & Linux) framework for rapid prototyping of machine vision algorithms. With the GUI ImageNet Designer, no programming knowledge is required to perform operations on images. A configured ImageNet can be loaded and executed from C++ code without the need for loading the ImageNet Designer GUI to achieve higher execution performance. == History == ImageNets was developed by the Institute of Automation, University of Bremen, Germany. The software was first publicly released in 2010. Originally, ImageNets was developed for the Care-Providing Robot FRIEND but it can be used for a wide range of computer vision applications.

    Read more →
  • Robust principal component analysis

    Robust principal component analysis

    Robust Principal Component Analysis (RPCA) is a modification of the widely used statistical procedure of principal component analysis (PCA) which works well with respect to grossly corrupted observations. A number of different approaches exist for Robust PCA, including an idealized version of Robust PCA, which aims to recover a low-rank matrix L0 from highly corrupted measurements M = L0 +S0. This decomposition in low-rank and sparse matrices can be achieved by techniques such as Principal Component Pursuit method (PCP), Stable PCP, Quantized PCP, Block based PCP, and Local PCP. Then, optimization methods are used such as the Augmented Lagrange Multiplier Method (ALM), Alternating Direction Method (ADM), Fast Alternating Minimization (FAM), Iteratively Reweighted Least Squares (IRLS ) or alternating projections (AP). == Algorithms == === Non-convex method === The 2014 guaranteed algorithm for the robust PCA problem (with the input matrix being M = L + S {\displaystyle M=L+S} ) is an alternating minimization type algorithm. The computational complexity is O ( m n r 2 log ⁡ 1 ϵ ) {\displaystyle O\left(mnr^{2}\log {\frac {1}{\epsilon }}\right)} where the input is the superposition of a low-rank (of rank r {\displaystyle r} ) and a sparse matrix of dimension m × n {\displaystyle m\times n} and ϵ {\displaystyle \epsilon } is the desired accuracy of the recovered solution, i.e., ‖ L ^ − L ‖ F ≤ ϵ {\displaystyle \|{\widehat {L}}-L\|_{F}\leq \epsilon } where L {\displaystyle L} is the true low-rank component and L ^ {\displaystyle {\widehat {L}}} is the estimated or recovered low-rank component. Intuitively, this algorithm performs projections of the residual onto the set of low-rank matrices (via the SVD operation) and sparse matrices (via entry-wise hard thresholding) in an alternating manner - that is, low-rank projection of the difference the input matrix and the sparse matrix obtained at a given iteration followed by sparse projection of the difference of the input matrix and the low-rank matrix obtained in the previous step, and iterating the two steps until convergence. This alternating projections algorithm is later improved by an accelerated version, coined AccAltProj. The acceleration is achieved by applying a tangent space projection before projecting the residue onto the set of low-rank matrices. This trick improves the computational complexity to O ( m n r log ⁡ 1 ϵ ) {\displaystyle O\left(mnr\log {\frac {1}{\epsilon }}\right)} with a much smaller constant in front while it maintains the theoretically guaranteed linear convergence. Another fast version of accelerated alternating projections algorithm is IRCUR. It uses the structure of CUR decomposition in alternating projections framework to dramatically reduces the computational complexity of RPCA to O ( max { m , n } r 2 log ⁡ ( m ) log ⁡ ( n ) log ⁡ 1 ϵ ) {\displaystyle O\left(\max\{m,n\}r^{2}\log(m)\log(n)\log {\frac {1}{\epsilon }}\right)} === Convex relaxation === This method consists of relaxing the rank constraint r a n k ( L ) {\displaystyle rank(L)} in the optimization problem to the nuclear norm ‖ L ‖ ∗ {\displaystyle \|L\|_{}} and the sparsity constraint ‖ S ‖ 0 {\displaystyle \|S\|_{0}} to ℓ 1 {\displaystyle \ell _{1}} -norm ‖ S ‖ 1 {\displaystyle \|S\|_{1}} . The resulting program can be solved using methods such as the method of Augmented Lagrange Multipliers. === Deep-learning augmented method === Some recent works propose RPCA algorithms with learnable/training parameters. Such a learnable/trainable algorithm can be unfolded as a deep neural network whose parameters can be learned via machine learning techniques from a given dataset or problem distribution. The learned algorithm will have superior performance on the corresponding problem distribution. == Applications == RPCA has many real life important applications particularly when the data under study can naturally be modeled as a low-rank plus a sparse contribution. Following examples are inspired by contemporary challenges in computer science, and depending on the applications, either the low-rank component or the sparse component could be the object of interest: === Video surveillance === Given a sequence of surveillance video frames, it is often required to identify the activities that stand out from the background. If we stack the video frames as columns of a matrix M, then the low-rank component L0 naturally corresponds to the stationary background and the sparse component S0 captures the moving objects in the foreground. === Face recognition === Images of a convex, Lambertian surface under varying illuminations span a low-dimensional subspace. This is one of the reasons for effectiveness of low-dimensional models for imagery data. In particular, it is easy to approximate images of a human's face by a low-dimensional subspace. To be able to correctly retrieve this subspace is crucial in many applications such as face recognition and alignment. It turns out that RPCA can be applied successfully to this problem to exactly recover the face.

    Read more →
  • Intelligent automation

    Intelligent automation

    Intelligent automation (IA), or intelligent process automation, is a software term that refers to a combination of artificial intelligence (AI) and robotic process automation (RPA). Companies use intelligent automation to cut costs and streamline tasks by using artificial-intelligence-powered robotic software to mitigate repetitive tasks. As it accumulates data, the system learns in an effort to improve its efficiency. Intelligent automation applications consist of, but are not limited to, pattern analysis, data assembly, and classification. The term is similar to hyperautomation, a concept identified by research group Gartner as being one of the top technology trends of 2020. == Technology == Intelligent automation applies the assembly line concept of breaking tasks into repetitive steps to improve business processes. Rather than having humans perform each step, intelligent automation can replace steps with an intelligent software robot, improving efficiency. Intelligent automation integrates robotic process automation (RPA) with artificial intelligence techniques (such as machine learning, natural-language processing, and computer vision) enabling systems to interpret data, make decisions, and adapt to changing inputs. Modern platforms use a layered architecture combining workflow orchestration, low-code tools, integration middleware, and AI services to coordinate bots and data pipelines across organisational systems. == Applications == Intelligent automation is used to process unstructured content. Common real-world applications include self-driving cars, self-checkouts at grocery stores, smart home assistants, and appliances. Businesses can apply data and machine learning to build predictive analytics that react to consumer behavior changes, or to implement RPA to improve manufacturing floor operations. For example, the technology has also been used to automate the workflow behind distributing COVID-19 vaccines. Data provided by hospital systems’ electronic health records can be processed to identify and educate patients, and schedule vaccinations. Intelligent automation can provide real-time insights on profitability and efficiency. However, in an April 2022 survey by Alchemmy, despite three quarters of businesses acknowledging the importance of Artificial Intelligence to their future development, just a quarter of business leaders (25%) considered Intelligent Automation a “game changer” in understanding current performance. 42% of CTOs see “shortage of talent” as the main obstacle to implementing Intelligent Automation in their business, while 36% of CEOs see ‘upskilling and professional development of existing workforce’ as the most significant adoption barrier. IA is becoming increasingly accessible for firms of all sizes. With this in mind, it is expected to continue to grow rapidly in all industries. This technology has the potential to change the workforce. As it advances, it will be able to perform increasingly complex and difficult tasks. In addition, this may expose certain workforce issues as well as change how tasks are allocated. Tools such as Semrush's AI Visibility Toolkit and Enterprise AIO reflect these developments by analysing how entities are referenced and represented within responses produced by large-language-model-based systems. == Benefits == Streamline processes: Repetitive manual tasks can put a strain on the workforce. However, with AI agents, these tasks can be automated to allow teams to focus on more important matters that require human cognition. Intelligent automation can also be used to mitigate tasks with human error which in turn increases proficiency. This allows the opportunity for firms to scale production without the traditional negative consequences such as reduced quality or increased risk. Customer service improvement: Customer service can be significantly improved, providing the firm with a competitive advantage. IA utilizing chat features allows for instant curated responses to customers. In addition, it can give updates to customers, make appointments, manage calls, and personalize campaigns. Flexibility: Due to the wide range of applications, IA is useful across a variety of fields, technologies, projects and industries. In addition, IA can be integrated with current automated systems in place. This allows for optimized systems unique to each firm to best fit their individual needs. == Capabilities == Cognitive automation: Employs AI techniques to assist humans in decision-making and task completion Natural language processing: Allows computers to automate knowledge work Business process management: Enhances the consistency and agility of corporate operations Process mining: Applies data mining methods to discover, analyze, and improve business processes Intelligent document processing: Utilizes OCR and other advanced technologies to extract data from documents and convert it into structured, usable data Computer vision: Allows computers to extract information from digital images, videos, and other visual inputs Integration automation: Establishes a unified platform with automated workflows that integrate data, applications, and devices.

    Read more →
  • Transkribus

    Transkribus

    Transkribus is a platform for the text recognition, image analysis and structure recognition of historical documents. The platform was created in the context of the two EU projects "tranScriptorium" (2013–2015) and "READ" (Recognition and Enrichment of Archival Documents – 2016–2019). It was developed by the University of Innsbruck. Since July 1, 2019 the platform has been directed and further developed by the READ-COOP, a non-profit cooperative. The platform integrates tools developed by research groups throughout Europe, including the Pattern Recognition and Human Language Technology (PRHLT) group of the Technical University of Valencia and the Computational Intelligence Technology Lab (CITlab) group of University of Rostock. Comparable programs that offer similar functions are eScriptorium and OCR4All.

    Read more →
  • Preference regression

    Preference regression

    Preference regression is a statistical technique used by marketers to determine consumers’ preferred core benefits. It usually supplements product positioning techniques like multi dimensional scaling or factor analysis and is used to create ideal vectors on perceptual maps. == Application == Starting with raw data from surveys, researchers apply positioning techniques to determine important dimensions and plot the position of competing products on these dimensions. Next they regress the survey data against the dimensions. The independent variables are the data collected in the survey. The dependent variable is the preference datum. Like all regression methods, the computer fits weights to best predict data. The resultant regression line is referred to as an ideal vector because the slope of the vector is the ratio of the preferences for the two dimensions. If all the data is used in the regression, the program will derive a single equation and hence a single ideal vector. This tends to be a blunt instrument so researchers refine the process with cluster analysis. This creates clusters that reflect market segments. Separate preference regressions are then done on the data within each segment. This provides an ideal vector for each segment. == Alternative methods == Self-stated importance method is an alternative method in which direct survey data is used to determine the weightings rather than statistical imputations. A third method is conjoint analysis in which an additive method is used.

    Read more →
  • Training, validation, and test data sets

    Training, validation, and test data sets

    In machine learning, a common task is the study and construction of algorithms that can learn from and make predictions on data. Such algorithms function by making data-driven predictions or decisions, through building a mathematical model from input data. These input data used to build the model are usually divided into multiple data sets. In particular, three data sets are commonly used in different stages of the creation of the model: training, validation, and testing sets. The model is initially fit on a training data set, which is a set of examples used to fit the parameters (e.g. weights of connections between neurons in artificial neural networks) of the model. The model (e.g. a naive Bayes classifier) is trained on the training data set using a supervised learning method, for example using optimization methods such as gradient descent or stochastic gradient descent. In practice, the training data set often consists of pairs of an input vector (or scalar) and the corresponding output vector (or scalar), where the answer key is commonly denoted as the target (or label). The current model is run with the training data set and produces a result, which is then compared with the target, for each input vector in the training data set. Based on the result of the comparison and the specific learning algorithm being used, the parameters of the model are adjusted. The model fitting can include both variable selection and parameter estimation. Successively, the fitted model is used to predict the responses for the observations in a second data set called the validation data set. The validation data set provides an unbiased evaluation of a model fit on the training data set while tuning the model's hyperparameters (e.g. the number of hidden units—layers and layer widths—in a neural network). Validation data sets can be used for regularization by early stopping (stopping training when the error on the validation data set increases, as this is a sign of over-fitting to the training data set). This simple procedure is complicated in practice by the fact that the validation data set's error may fluctuate during training, producing multiple local minima. This complication has led to the creation of many ad-hoc rules for deciding when over-fitting has truly begun. Finally, the test data set is a data set used to provide an unbiased evaluation of a model fit on the training data set. When the data in the test data set has never been used (for example in cross-validation), the test data set is called a holdout data set. The term "validation set" is sometimes used instead of "test set" in some literature (e.g., if the original data set was partitioned into only two subsets, the test set might be referred to as the validation set). Deciding the sizes and strategies for data set division in training, test and validation sets is very dependent on the problem and data available. == Training data set == A training data set is a data set of examples used during the learning process and is used to fit the parameters (e.g., weights) of, for example, a classifier. For classification tasks, a supervised learning algorithm looks at the training data set to determine, or learn, the optimal combinations of variables that will generate a good predictive model. The goal is to produce a trained (fitted) model that generalizes well to new, unknown data. The fitted model is evaluated using “new” examples from the held-out data sets (validation and test data sets) to estimate the model’s accuracy in classifying new data. To reduce the risk of issues such as over-fitting, the examples in the validation and test data sets should not be used to train the model. Most approaches that search through training data for empirical relationships tend to overfit the data, meaning that they can identify and exploit apparent relationships in the training data that do not hold in general. When a training set is continuously expanded with new data, then this is incremental learning. == Validation data set == A validation data set is a data set of examples used to tune the hyperparameters (i.e. the architecture) of a model. It is sometimes also called the development set or the "dev set". An example of a hyperparameter for artificial neural networks includes the number of hidden units in each layer. It, as well as the testing set (as mentioned below), should follow the same probability distribution as the training data set. In order to avoid overfitting, when any classification parameter needs to be adjusted, it is necessary to have a validation data set in addition to the training and test data sets. For example, if the most suitable classifier for the problem is sought, the training data set is used to train the different candidate classifiers, the validation data set is used to compare their performances and decide which one to take and, finally, the test data set is used to obtain the performance characteristics such as accuracy, sensitivity, specificity, F-measure, and so on. The validation data set functions as a hybrid: it is training data used for testing, but neither as part of the low-level training nor as part of the final testing. The basic process of using a validation data set for model selection (as part of training data set, validation data set, and test data set) is: Since our goal is to find the network having the best performance on new data, the simplest approach to the comparison of different networks is to evaluate the error function using data which is independent of that used for training. Various networks are trained by minimization of an appropriate error function defined with respect to a training data set. The performance of the networks is then compared by evaluating the error function using an independent validation set, and the network having the smallest error with respect to the validation set is selected. This approach is called the hold out method. Since this procedure can itself lead to some overfitting to the validation set, the performance of the selected network should be confirmed by measuring its performance on a third independent set of data called a test set. An application of this process is in early stopping, where the candidate models are successive iterations of the same network, and training stops when the error on the validation set grows, choosing the previous model (the one with minimum error). == Test data set == A test data set is a data set that is independent of the training data set, but that follows the same probability distribution as the training data set. A test set is therefore a set of examples used only to assess the performance (i.e. generalization) of a specified classifier on unseen data. To do this, the model is used to predict classifications of examples in the test set. Those predictions are compared to the examples' true classifications to assess the model's accuracy. If a model fit to the training and validation data set also fits the test data set well, minimal overfitting has taken place (see figure below). A better fitting of the training or validation data sets as opposed to the test data set usually points to overfitting. In the scenario where a data set has a low number of samples, it is usually partitioned into a training set and a validation data set, where the model is trained on the training set and refined using the validation set to improve accuracy, but this approach will lead to overfitting. The holdout method can also be employed, where the test set is used at the end, after training on the training set. Other techniques, such as cross-validation and bootstrapping, are used on small data sets. The bootstrap method generates numerous simulated data sets of the same size by randomly sampling with replacement from the original data, allowing the random data points to serve as test sets for evaluating model performance. Cross-validation splits the data set into multiple folds, with a single sub-fold used as test data; the model is trained on the remaining folds, and all folds are cross-validated (with results averaged and models consolidated) to estimate final model performance. Note that some sources advise against using a single split, as it can lead to overfitting as well as biased model performance estimates. For this reason, data sets are split into three partitions: training, validation and test data sets. The standard machine learning practice is to train on the training set and tune hyperparameters using the validation set, where the validation process selects the model with the lowest validation loss, which is then tested on the test data set (normally held out) to assess the final model. The holdout method for the test set reduces computation by avoiding using the test set after each epoch. The test data set should never be used for validating the training model or fine-tuning hyperparameters, as it provides an accurate and honest evaluation of the model's final performance on unseen dat

    Read more →
  • WriterDuet

    WriterDuet

    WriterDuet is a screenwriting software for writing and editing screenplays and other forms of mass media. == History == WriterDuet was founded in 2013 by Guy Goldstein. In April 2015, WriterDuet acquired the domain for Scripped.com after they closed, citing a serious technical failure. In August 2016, WriterDuet released a localized version of its software in China. In May 2018, WriterDuet included Bechdel test analysis functions to address issues of gender diversity in the screenwriting industry. In 2018, WriterDuet published WriterSolo, an offline version of their app that runs on the browser and opens/saves files on the computer, Dropbox, Google Drive, and iCloud. In July 2019, WriterDuet made the WriterSolo browser app and desktop app available as pay-what-you-want under the web address FreeScreenwriting.com. == Features == WriterDuet is primarily used to outline, write, and format screenplays to the standards recommended by the AMPAS. It also supports formats for theater, novels, and video games. The software is powered by Firebase allowing users to write together in real-time from multiple devices. WriterDuet's main competitors in the screenwriting industry are Final Draft, Celtx, and Movie Magic Screenwriter.

    Read more →
  • Margin-infused relaxed algorithm

    Margin-infused relaxed algorithm

    Margin-infused relaxed algorithm (MIRA) is a machine learning and online algorithm for multiclass classification problems. It is designed to learn a set of parameters (vector or matrix) by processing all the given training examples one-by-one and updating the parameters according to each training example, so that the current training example is classified correctly with a margin against incorrect classifications at least as large as their loss. The change of the parameters is kept as small as possible. A two-class version called binary MIRA simplifies the algorithm by not requiring the solution of a quadratic programming problem (see below). When used in a one-vs-all configuration, binary MIRA can be extended to a multiclass learner that approximates full MIRA, but may be faster to train. The flow of the algorithm looks as follows: The update step is then formalized as a quadratic programming problem: Find m i n ‖ w ( i + 1 ) − w ( i ) ‖ {\displaystyle min\|w^{(i+1)}-w^{(i)}\|} , so that s c o r e ( x t , y t ) − s c o r e ( x t , y ′ ) ≥ L ( y t , y ′ ) ∀ y ′ {\displaystyle score(x_{t},y_{t})-score(x_{t},y')\geq L(y_{t},y')\ \forall y'} , i.e. the score of the current correct training y {\displaystyle y} must be greater than the score of any other possible y ′ {\displaystyle y'} by at least the loss (number of errors) of that y ′ {\displaystyle y'} in comparison to y {\displaystyle y} .

    Read more →
  • Representer theorem

    Representer theorem

    For computer science, in statistical learning theory, a representer theorem is any of several related results stating that a minimizer f ∗ {\displaystyle f^{}} of a regularized empirical risk functional defined over a reproducing kernel Hilbert space can be represented as a finite linear combination of kernel products evaluated on the input points in the training set data. == Formal statement == The following Representer Theorem and its proof are due to Schölkopf, Herbrich, and Smola: Theorem: Consider a positive-definite real-valued kernel k : X × X → R {\displaystyle k:{\mathcal {X}}\times {\mathcal {X}}\to \mathbb {R} } on a non-empty set X {\displaystyle {\mathcal {X}}} with a corresponding reproducing kernel Hilbert space H k {\displaystyle H_{k}} . Let there be given a training sample ( x 1 , y 1 ) , … , ( x n , y n ) ∈ X × R {\displaystyle (x_{1},y_{1}),\dotsc ,(x_{n},y_{n})\in {\mathcal {X}}\times \mathbb {R} } , a strictly increasing real-valued function g : [ 0 , ∞ ) → R {\displaystyle g\colon [0,\infty )\to \mathbb {R} } , and an arbitrary error function E : ( X × R 2 ) n → R ∪ { ∞ } {\displaystyle E\colon ({\mathcal {X}}\times \mathbb {R} ^{2})^{n}\to \mathbb {R} \cup \lbrace \infty \rbrace } , which together define the following regularized empirical risk functional on H k {\displaystyle H_{k}} : f ↦ E ( ( x 1 , y 1 , f ( x 1 ) ) , … , ( x n , y n , f ( x n ) ) ) + g ( ‖ f ‖ ) . {\displaystyle f\mapsto E\left((x_{1},y_{1},f(x_{1})),\ldots ,(x_{n},y_{n},f(x_{n}))\right)+g\left(\lVert f\rVert \right).} Then, any minimizer of the empirical risk f ∗ = argmin f ∈ H k { E ( ( x 1 , y 1 , f ( x 1 ) ) , … , ( x n , y n , f ( x n ) ) ) + g ( ‖ f ‖ ) } , ( ∗ ) {\displaystyle f^{}={\underset {f\in H_{k}}{\operatorname {argmin} }}\left\lbrace E\left((x_{1},y_{1},f(x_{1})),\ldots ,(x_{n},y_{n},f(x_{n}))\right)+g\left(\lVert f\rVert \right)\right\rbrace ,\quad ()} admits a representation of the form: f ∗ ( ⋅ ) = ∑ i = 1 n α i k ( ⋅ , x i ) , {\displaystyle f^{}(\cdot )=\sum _{i=1}^{n}\alpha _{i}k(\cdot ,x_{i}),} where α i ∈ R {\displaystyle \alpha _{i}\in \mathbb {R} } for all 1 ≤ i ≤ n {\displaystyle 1\leq i\leq n} . Proof: Define a mapping φ : X → H k φ ( x ) = k ( ⋅ , x ) {\displaystyle {\begin{aligned}\varphi \colon {\mathcal {X}}&\to H_{k}\\\varphi (x)&=k(\cdot ,x)\end{aligned}}} (so that φ ( x ) = k ( ⋅ , x ) {\displaystyle \varphi (x)=k(\cdot ,x)} is itself a map X → R {\displaystyle {\mathcal {X}}\to \mathbb {R} } ). Since k {\displaystyle k} is a reproducing kernel, then φ ( x ) ( x ′ ) = k ( x ′ , x ) = ⟨ φ ( x ′ ) , φ ( x ) ⟩ , {\displaystyle \varphi (x)(x')=k(x',x)=\langle \varphi (x'),\varphi (x)\rangle ,} where ⟨ ⋅ , ⋅ ⟩ {\displaystyle \langle \cdot ,\cdot \rangle } is the inner product on H k {\displaystyle H_{k}} . Given any x 1 , … , x n {\displaystyle x_{1},\ldots ,x_{n}} , one can use orthogonal projection to decompose any f ∈ H k {\displaystyle f\in H_{k}} into a sum of two functions, one lying in span ⁡ { φ ( x 1 ) , … , φ ( x n ) } {\displaystyle \operatorname {span} \left\lbrace \varphi (x_{1}),\ldots ,\varphi (x_{n})\right\rbrace } , and the other lying in the orthogonal complement: f = ∑ i = 1 n α i φ ( x i ) + v , {\displaystyle f=\sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})+v,} where ⟨ v , φ ( x i ) ⟩ = 0 {\displaystyle \langle v,\varphi (x_{i})\rangle =0} for all i {\displaystyle i} . The above orthogonal decomposition and the reproducing property together show that applying f {\displaystyle f} to any training point x j {\displaystyle x_{j}} produces f ( x j ) = ⟨ ∑ i = 1 n α i φ ( x i ) + v , φ ( x j ) ⟩ = ∑ i = 1 n α i ⟨ φ ( x i ) , φ ( x j ) ⟩ , {\displaystyle f(x_{j})=\left\langle \sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})+v,\varphi (x_{j})\right\rangle =\sum _{i=1}^{n}\alpha _{i}\langle \varphi (x_{i}),\varphi (x_{j})\rangle ,} which we observe is independent of v {\displaystyle v} . Consequently, the value of the error function E {\displaystyle E} in () is likewise independent of v {\displaystyle v} . For the second term (the regularization term), since v {\displaystyle v} is orthogonal to ∑ i = 1 n α i φ ( x i ) {\displaystyle \sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})} and g {\displaystyle g} is strictly monotonic, we have g ( ‖ f ‖ ) = g ( ‖ ∑ i = 1 n α i φ ( x i ) + v ‖ ) = g ( ‖ ∑ i = 1 n α i φ ( x i ) ‖ 2 + ‖ v ‖ 2 ) ≥ g ( ‖ ∑ i = 1 n α i φ ( x i ) ‖ ) . {\displaystyle {\begin{aligned}g\left(\lVert f\rVert \right)&=g\left(\lVert \sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})+v\rVert \right)\\&=g\left({\sqrt {\lVert \sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})\rVert ^{2}+\lVert v\rVert ^{2}}}\right)\\&\geq g\left(\lVert \sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})\rVert \right).\end{aligned}}} Therefore, setting v = 0 {\displaystyle v=0} does not affect the first term of (), while it strictly decreases the second term. Consequently, any minimizer f ∗ {\displaystyle f^{}} in () must have v = 0 {\displaystyle v=0} , i.e., it must be of the form f ∗ ( ⋅ ) = ∑ i = 1 n α i φ ( x i ) = ∑ i = 1 n α i k ( ⋅ , x i ) , {\displaystyle f^{}(\cdot )=\sum _{i=1}^{n}\alpha _{i}\varphi (x_{i})=\sum _{i=1}^{n}\alpha _{i}k(\cdot ,x_{i}),} which is the desired result. == Generalizations == The Theorem stated above is a particular example of a family of results that are collectively referred to as "representer theorems"; here we describe several such. The first statement of a representer theorem was due to Kimeldorf and Wahba for the special case in which E ( ( x 1 , y 1 , f ( x 1 ) ) , … , ( x n , y n , f ( x n ) ) ) = 1 n ∑ i = 1 n ( f ( x i ) − y i ) 2 , g ( ‖ f ‖ ) = λ ‖ f ‖ 2 {\displaystyle {\begin{aligned}E\left((x_{1},y_{1},f(x_{1})),\ldots ,(x_{n},y_{n},f(x_{n}))\right)&={\frac {1}{n}}\sum _{i=1}^{n}(f(x_{i})-y_{i})^{2},\\g(\lVert f\rVert )&=\lambda \lVert f\rVert ^{2}\end{aligned}}} for λ > 0 {\displaystyle \lambda >0} . Schölkopf, Herbrich, and Smola generalized this result by relaxing the assumption of the squared-loss cost and allowing the regularizer to be any strictly monotonically increasing function g ( ⋅ ) {\displaystyle g(\cdot )} of the Hilbert space norm. It is possible to generalize further by augmenting the regularized empirical risk functional through the addition of unpenalized offset terms. For example, Schölkopf, Herbrich, and Smola also consider the minimization f ~ ∗ = argmin ⁡ { E ( ( x 1 , y 1 , f ~ ( x 1 ) ) , … , ( x n , y n , f ~ ( x n ) ) ) + g ( ‖ f ‖ ) ∣ f ~ = f + h ∈ H k ⊕ span ⁡ { ψ p ∣ 1 ≤ p ≤ M } } , ( † ) {\displaystyle {\tilde {f}}^{}=\operatorname {argmin} \left\lbrace E\left((x_{1},y_{1},{\tilde {f}}(x_{1})),\ldots ,(x_{n},y_{n},{\tilde {f}}(x_{n}))\right)+g\left(\lVert f\rVert \right)\mid {\tilde {f}}=f+h\in H_{k}\oplus \operatorname {span} \lbrace \psi _{p}\mid 1\leq p\leq M\rbrace \right\rbrace ,\quad (\dagger )} i.e., we consider functions of the form f ~ = f + h {\displaystyle {\tilde {f}}=f+h} , where f ∈ H k {\displaystyle f\in H_{k}} and h {\displaystyle h} is an unpenalized function lying in the span of a finite set of real-valued functions { ψ p : X → R ∣ 1 ≤ p ≤ M } {\displaystyle \lbrace \psi _{p}\colon {\mathcal {X}}\to \mathbb {R} \mid 1\leq p\leq M\rbrace } . Under the assumption that the n × M {\displaystyle n\times M} matrix ( ψ p ( x i ) ) i p {\displaystyle \left(\psi _{p}(x_{i})\right)_{ip}} has rank M {\displaystyle M} , they show that the minimizer f ~ ∗ {\displaystyle {\tilde {f}}^{}} in ( † ) {\displaystyle (\dagger )} admits a representation of the form f ~ ∗ ( ⋅ ) = ∑ i = 1 n α i k ( ⋅ , x i ) + ∑ p = 1 M β p ψ p ( ⋅ ) {\displaystyle {\tilde {f}}^{}(\cdot )=\sum _{i=1}^{n}\alpha _{i}k(\cdot ,x_{i})+\sum _{p=1}^{M}\beta _{p}\psi _{p}(\cdot )} where α i , β p ∈ R {\displaystyle \alpha _{i},\beta _{p}\in \mathbb {R} } and the β p {\displaystyle \beta _{p}} are all uniquely determined. The conditions under which a representer theorem exists were investigated by Argyriou, Micchelli, and Pontil, who proved the following: Theorem: Let X {\displaystyle {\mathcal {X}}} be a nonempty set, k {\displaystyle k} a positive-definite real-valued kernel on X × X {\displaystyle {\mathcal {X}}\times {\mathcal {X}}} with corresponding reproducing kernel Hilbert space H k {\displaystyle H_{k}} , and let R : H k → R {\displaystyle R\colon H_{k}\to \mathbb {R} } be a differentiable regularization function. Then given a training sample ( x 1 , y 1 ) , … , ( x n , y n ) ∈ X × R {\displaystyle (x_{1},y_{1}),\ldots ,(x_{n},y_{n})\in {\mathcal {X}}\times \mathbb {R} } and an arbitrary error function E : ( X × R 2 ) m → R ∪ { ∞ } {\displaystyle E\colon ({\mathcal {X}}\times \mathbb {R} ^{2})^{m}\to \mathbb {R} \cup \lbrace \infty \rbrace } , a minimizer f ∗ = argmin f ∈ H k { E ( ( x 1 , y 1 , f ( x 1 ) ) , … , ( x n , y n , f ( x n ) ) ) + R ( f ) } ( ‡ ) {\displaystyle f^{}={\underset {f\in H_{k}}{\operatorname {argmin} }}\left\lbrace E\left((x_{1},y_{1},f(x_{1})),\ldots ,(x_{n},y_{n},f(x_{n}))\right)+R(f)\right\rbrace \quad (\ddagger )} of the regularized empirical risk admits a repr

    Read more →
  • Generalized iterative scaling

    Generalized iterative scaling

    In statistics, generalized iterative scaling (GIS) and improved iterative scaling (IIS) are two early algorithms used to fit log-linear models, notably multinomial logistic regression (MaxEnt) classifiers and extensions of it such as MaxEnt Markov models and conditional random fields. These algorithms have been largely surpassed by gradient-based methods such as L-BFGS and coordinate descent algorithms.

    Read more →
  • Vx-underground

    Vx-underground

    vx-underground, also known as VXUG, is an educational website about malware and cybersecurity. It claims to have the largest online repository of malware. The site was launched in May, 2019 and has grown to host over 35 million pieces of malware samples. On their account on Twitter, VXUG reports on and verifies cybersecurity breaches. == Reception == Kim Crawley compared the site to VirusTotal and states that vx-underground is more susceptible to suspicion for law enforcement. == Data breach reports == In May 2024, the International Baccalaureate organizations faced allegations over supposed breaches in their IT infrastructure after an incident of examination leaks. Upon inspecting leaked data, VXUG were the first to report that the breach seemed legitimate on the morning of May 6.

    Read more →
  • Mathematics of neural networks in machine learning

    Mathematics of neural networks in machine learning

    An artificial neural network (ANN) or neural network combines biological principles with advanced statistics to solve problems in domains such as pattern recognition and game-play. ANNs adopt the basic model of neuron analogues connected to each other in a variety of ways. == Structure == === Neuron === A neuron with label j {\displaystyle j} receiving an input p j ( t ) {\displaystyle p_{j}(t)} from predecessor neurons consists of the following components: an activation a j ( t ) {\displaystyle a_{j}(t)} , the neuron's state, depending on a discrete time parameter, an optional threshold θ j {\displaystyle \theta _{j}} , which stays fixed unless changed by learning, an activation function f {\displaystyle f} that computes the new activation at a given time t + 1 {\displaystyle t+1} from a j ( t ) {\displaystyle a_{j}(t)} , θ j {\displaystyle \theta _{j}} and the net input p j ( t ) {\displaystyle p_{j}(t)} giving rise to the relation a j ( t + 1 ) = f ( a j ( t ) , p j ( t ) , θ j ) , {\displaystyle a_{j}(t+1)=f(a_{j}(t),p_{j}(t),\theta _{j}),} and an output function f out {\displaystyle f_{\text{out}}} computing the output from the activation o j ( t ) = f out ( a j ( t ) ) . {\displaystyle o_{j}(t)=f_{\text{out}}(a_{j}(t)).} Often the output function is simply the identity function. An input neuron has no predecessor but serves as input interface for the whole network. Similarly an output neuron has no successor and thus serves as output interface of the whole network. === Propagation function === The propagation function computes the input p j ( t ) {\displaystyle p_{j}(t)} to the neuron j {\displaystyle j} from the outputs o i ( t ) {\displaystyle o_{i}(t)} and typically has the form p j ( t ) = ∑ i o i ( t ) w i j . {\displaystyle p_{j}(t)=\sum _{i}o_{i}(t)w_{ij}.} === Bias === A bias term can be added, changing the form to the following: p j ( t ) = ∑ i o i ( t ) w i j + w 0 j , {\displaystyle p_{j}(t)=\sum _{i}o_{i}(t)w_{ij}+w_{0j},} where w 0 j {\displaystyle w_{0j}} is a bias. == Neural networks as functions == Neural network models can be viewed as defining a function that takes an input (observation) and produces an output (decision) f : X → Y {\displaystyle \textstyle f:X\rightarrow Y} or a distribution over X {\displaystyle \textstyle X} or both X {\displaystyle \textstyle X} and Y {\displaystyle \textstyle Y} . Sometimes models are intimately associated with a particular learning rule. A common use of the phrase "ANN model" is really the definition of a class of such functions (where members of the class are obtained by varying parameters, connection weights, or specifics of the architecture such as the number of neurons, number of layers or their connectivity). Mathematically, a neuron's network function f ( x ) {\displaystyle \textstyle f(x)} is defined as a composition of other functions g i ( x ) {\displaystyle \textstyle g_{i}(x)} , that can further be decomposed into other functions. This can be conveniently represented as a network structure, with arrows depicting the dependencies between functions. A widely used type of composition is the nonlinear weighted sum, where f ( x ) = K ( ∑ i w i g i ( x ) ) {\displaystyle \textstyle f(x)=K\left(\sum _{i}w_{i}g_{i}(x)\right)} , where K {\displaystyle \textstyle K} (commonly referred to as the activation function) is some predefined function, such as the hyperbolic tangent, sigmoid function, softmax function, or rectifier function. The important characteristic of the activation function is that it provides a smooth transition as input values change, i.e. a small change in input produces a small change in output. The following refers to a collection of functions g i {\displaystyle \textstyle g_{i}} as a vector g = ( g 1 , g 2 , … , g n ) {\displaystyle \textstyle g=(g_{1},g_{2},\ldots ,g_{n})} . This figure depicts such a decomposition of f {\displaystyle \textstyle f} , with dependencies between variables indicated by arrows. These can be interpreted in two ways. The first view is the functional view: the input x {\displaystyle \textstyle x} is transformed into a 3-dimensional vector h {\displaystyle \textstyle h} , which is then transformed into a 2-dimensional vector g {\displaystyle \textstyle g} , which is finally transformed into f {\displaystyle \textstyle f} . This view is most commonly encountered in the context of optimization. The second view is the probabilistic view: the random variable F = f ( G ) {\displaystyle \textstyle F=f(G)} depends upon the random variable G = g ( H ) {\displaystyle \textstyle G=g(H)} , which depends upon H = h ( X ) {\displaystyle \textstyle H=h(X)} , which depends upon the random variable X {\displaystyle \textstyle X} . This view is most commonly encountered in the context of graphical models. The two views are largely equivalent. In either case, for this particular architecture, the components of individual layers are independent of each other (e.g., the components of g {\displaystyle \textstyle g} are independent of each other given their input h {\displaystyle \textstyle h} ). This naturally enables a degree of parallelism in the implementation. Networks such as the previous one are commonly called feedforward, because their graph is a directed acyclic graph. Networks with cycles are commonly called recurrent. Such networks are commonly depicted in the manner shown at the top of the figure, where f {\displaystyle \textstyle f} is shown as dependent upon itself. However, an implied temporal dependence is not shown. == Backpropagation == Backpropagation training algorithms fall into three categories: steepest descent (with variable learning rate and momentum, resilient backpropagation); quasi-Newton (Broyden–Fletcher–Goldfarb–Shanno, one step secant); Levenberg–Marquardt and conjugate gradient (Fletcher–Reeves update, Polak–Ribiére update, Powell–Beale restart, scaled conjugate gradient). === Algorithm === Let N {\displaystyle N} be a network with e {\displaystyle e} connections, m {\displaystyle m} inputs and n {\displaystyle n} outputs. Below, x 1 , x 2 , … {\displaystyle x_{1},x_{2},\dots } denote vectors in R m {\displaystyle \mathbb {R} ^{m}} , y 1 , y 2 , … {\displaystyle y_{1},y_{2},\dots } vectors in R n {\displaystyle \mathbb {R} ^{n}} , and w 0 , w 1 , w 2 , … {\displaystyle w_{0},w_{1},w_{2},\ldots } vectors in R e {\displaystyle \mathbb {R} ^{e}} . These are called inputs, outputs and weights, respectively. The network corresponds to a function y = f N ( w , x ) {\displaystyle y=f_{N}(w,x)} which, given a weight w {\displaystyle w} , maps an input x {\displaystyle x} to an output y {\displaystyle y} . In supervised learning, a sequence of training examples ( x 1 , y 1 ) , … , ( x p , y p ) {\displaystyle (x_{1},y_{1}),\dots ,(x_{p},y_{p})} produces a sequence of weights w 0 , w 1 , … , w p {\displaystyle w_{0},w_{1},\dots ,w_{p}} starting from some initial weight w 0 {\displaystyle w_{0}} , usually chosen at random. These weights are computed in turn: first compute w i {\displaystyle w_{i}} using only ( x i , y i , w i − 1 ) {\displaystyle (x_{i},y_{i},w_{i-1})} for i = 1 , … , p {\displaystyle i=1,\dots ,p} . The output of the algorithm is then w p {\displaystyle w_{p}} , giving a new function x ↦ f N ( w p , x ) {\displaystyle x\mapsto f_{N}(w_{p},x)} . The computation is the same in each step, hence only the case i = 1 {\displaystyle i=1} is described. w 1 {\displaystyle w_{1}} is calculated from ( x 1 , y 1 , w 0 ) {\displaystyle (x_{1},y_{1},w_{0})} by considering a variable weight w {\displaystyle w} and applying gradient descent to the function w ↦ E ( f N ( w , x 1 ) , y 1 ) {\displaystyle w\mapsto E(f_{N}(w,x_{1}),y_{1})} to find a local minimum, starting at w = w 0 {\displaystyle w=w_{0}} . This makes w 1 {\displaystyle w_{1}} the minimizing weight found by gradient descent. == Learning pseudocode == To implement the algorithm above, explicit formulas are required for the gradient of the function w ↦ E ( f N ( w , x ) , y ) {\displaystyle w\mapsto E(f_{N}(w,x),y)} where the function is E ( y , y ′ ) = | y − y ′ | 2 {\displaystyle E(y,y')=|y-y'|^{2}} . The learning algorithm can be divided into two phases: propagation and weight update. === Propagation === Propagation involves the following steps: Propagation forward through the network to generate the output value(s) Calculation of the cost (error term) Propagation of the output activations back through the network using the training pattern target to generate the deltas (the difference between the targeted and actual output values) of all output and hidden neurons. === Weight update === For each weight: Multiply the weight's output delta and input activation to find the gradient of the weight. Subtract the ratio (percentage) of the weight's gradient from the weight. The learning rate is the ratio (percentage) that influences the speed and quality of learning. The greater the ratio, the faster the neuron trains, but the lower the ratio, the more accurat

    Read more →
  • Frequent pattern discovery

    Frequent pattern discovery

    Frequent pattern discovery (or FP discovery, FP mining, or Frequent itemset mining) is part of knowledge discovery in databases, Massive Online Analysis, and data mining; it describes the task of finding the most frequent and relevant patterns in large datasets. The concept was first introduced for mining transaction databases. Frequent patterns are defined as subsets (itemsets, subsequences, or substructures) that appear in a data set with frequency no less than a user-specified or auto-determined threshold. == Techniques == Techniques for FP mining include: market basket analysis cross-marketing catalog design clustering classification recommendation systems For the most part, FP discovery can be done using association rule learning with particular algorithms Eclat, FP-growth and the Apriori algorithm. Other strategies include: Frequent subtree mining Structure mining Sequential pattern mining and respective specific techniques. Implementations exist for various machine learning systems or modules like MLlib for Apache Spark.

    Read more →