AI Art Zeus

AI Art Zeus — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Image formation

  The study of image formation encompasses the radiometric and geometric processes by which 2D images of 3D objects are formed. In the case of digital images, the image formation process also includes analog to digital conversion and sampling. == Imaging == The imaging process is a mapping of an object to an image plane. Each point on the image corresponds to a point on the object. An illuminated object will scatter light toward a lens and the lens will collect and focus the light to create the image. The ratio of the height of the image to the height of the object is the magnification. The spatial extent of the image surface and the focal length of the lens determines the field of view of the lens. Image formation of mirror these have a center of curvature and its focal length of the mirror is half of the center of curvature. == Illumination == An object may be illuminated by the light from an emitting source such as the sun, a light bulb or a Light Emitting Diode. The light incident on the object is reflected in a manner dependent on the surface properties of the object. For rough surfaces, the reflected light is scattered in a manner described by the Bi-directional Reflectance Distribution Function (BRDF) of the surface. The BRDF of a surface is the ratio of the exiting power per square meter per steradian (radiance) to the incident power per square meter (irradiance). The BRDF typically varies with angle and may vary with wavelength, but a specific important case is a surface that has constant BRDF. This surface type is referred to as Lambertian and the magnitude of the BRDF is R/π, where R is the reflectivity of the surface. The portion of scattered light that propagates toward the lens is collected by the entrance pupil of the imaging lens over the field of view. == Field of view and imagery == The Field of view of a lens is limited by the size of the image plane and the focal length of the lens. The relationship between a location on the image and a location on the object is y = ftan(θ), where y is the max extent of the image plane, f is the focal length of the lens and θ is the field of view. If y is the max radial size of the image then θ is the field of view of the lens. While the image created by a lens is continuous, it can be modeled as a set of discrete field points, each representing a point on the object. The quality of the image is limited by the aberrations in the lens and the diffraction created by the finite aperture stop. == Pupils and stops == The aperture stop of a lens is a mechanical aperture which limits the light collection for each field point. The entrance pupil is the image of the aperture stop created by the optical elements on the object side of the lens. The light scattered by an object is collected by the entrance pupil and focused onto the image plane via a series of refractive elements. The cone of the focused light at the image plane is set by the size of the entrance pupil and the focal length of the lens. This is often referred to as the f-stop or f-number of the lens. f/# = f/D where D is the diameter of the entrance pupil. == Pixelation and color vs. monochrome == In typical digital imaging systems, a sensor is placed at the image plane. The light is focused on to the sensor and the continuous image is pixelated. The light incident on each pixel in the sensor will be integrated within the pixel and a proportional electronic signal will be generated. The angular geometric resolution of a pixel is given by atan(p/f), where p is the pitch of the pixel. This is also called the pixel field of view. The sensor may be monochrome or color. In the case of a monochrome sensor, the light incident on each pixel is integrated and the resulting image is a grayscale like picture. For color images, a mosaic color filter is typically placed over the pixels to create a color image. An example is a Bayer filter. The signal incident on each pixel is then digitized to a bit stream. == Image quality == The quality of an image is dependent upon both geometric and physical items. Geometrically, higher density of pixels across an image will give less blocky pixelation and thus a better geometric image quality. Lens aberrations also contribute to the quality of the image. Physically, diffraction due to the aperture stop will limit the resolvable spatial frequencies as a function of f-number. In the frequency domain, Modulation Transfer Function (MTF) is a measure of the quality of the imaging system. The MTF is a measure of the visibility of a sinusoidal variation in irradiance on the image plane as a function of the frequency of the sinusoid. It includes the effects of diffraction, aberrations and pixelation. For the lens, the MTF is the autocorrelation of the pupil function, so it accounts for the finite pupil extent and the lens aberrations. The sensor MTF is the Fourier Transform of the pixel geometry. For a square pixel, MTF(ξ) = sin(πξp)/πξp where p is the pixel width and ξ is the spatial frequency. The MTF of the combination of the lens and detector is the product of the two component MTFs. == Perception == Color images can be perceived via two means. In the case of computer vision the light incident on the sensor comprises the image. In the case of visual perception, the human eye has a color dependent response to light so this must be accounted for. This is important consideration when converting to grayscale. == Image formation in eye == The principal difference between the lens of the eye and an ordinary optical lens is that the former is flexible. The radius of the curvature of the anterior surface of the lens is greater than the radius of its posterior surface. The shape of the lens is controlled by tension in the fibers of the ciliary body. To focus on distant objects, the controlling muscles cause the lens to be relatively flattened. Similarly, these muscles allow the lens to become thicker in order to focus on objects near the eye. The distance between the center of the lens and the retina (focal length) varies from approximately 17 mm to about 14 mm, as the refractive power of the lens increases from its minimum to its maximum. When the eye focuses on an object farther away than about 3 m, the lens exhibits its lowest refractive power. When the eye focuses on a close object, the lens is most strongly refractive.

  Read more →
• 

  GPT-5.3-Codex

  GPT-5.3-Codex (Generative Pre-trained Transformer 5.3 Codex) is a large language model (LLM) announced and released by OpenAI on February 5, 2026. It is made as a competitor to Claude's Opus 4.6, focusing on code generation, speed and the ability to search repositories, run terminal commands and at the same time, debug code. In technical benchmarks, it is reported that GPT-5.3 Codex is 25% faster than Opus 4.6. GPT-5.3 Codex is available in the Codex app and on the web; access via API is also planned. According to OpenAI, GPT-5.3-Codex is the company's "first model that was instrumental in creating itself." On February 12, 2026, GPT-5.3-Codex-Spark was released in a research preview, which is a smaller version of GPT-5.3-Codex which supports text-only input. As of February 2026, GPT-5.3-Codex is only available for ChatGPT Pro ($200/month) subscribers.

  Read more →
• 

  GPT-5.3-Codex

  GPT-5.3-Codex (Generative Pre-trained Transformer 5.3 Codex) is a large language model (LLM) announced and released by OpenAI on February 5, 2026. It is made as a competitor to Claude's Opus 4.6, focusing on code generation, speed and the ability to search repositories, run terminal commands and at the same time, debug code. In technical benchmarks, it is reported that GPT-5.3 Codex is 25% faster than Opus 4.6. GPT-5.3 Codex is available in the Codex app and on the web; access via API is also planned. According to OpenAI, GPT-5.3-Codex is the company's "first model that was instrumental in creating itself." On February 12, 2026, GPT-5.3-Codex-Spark was released in a research preview, which is a smaller version of GPT-5.3-Codex which supports text-only input. As of February 2026, GPT-5.3-Codex is only available for ChatGPT Pro ($200/month) subscribers.

  Read more →
• 

  Hive (artificial intelligence company)

  Hive is an American artificial intelligence company offering machine learning models via APIs to enterprise customers. Hive uses around 700,000 gig workers to train data for its models through its Hive Work app. One of Hive's major offerings is to provide automated content moderation services. == Products == Hive is reported to have been engaged to provide content moderation services to social news aggregator Reddit, Giphy, BeReal, Donald Trump-affiliated social network Truth Social, and on online chat website Chatroulette. Parler, after its shutdown by content service providers in early 2021 due to a lack of content moderation, integrated with Hive and was allowed back in the App Store. Hive's content moderation models have been leveraged widely in the livestreaming industry, where the cost of human moderation is high. Hive's models have also been used in events such as the Super Bowl and March Madness, and its contextual advertising models used by NBC Universal and Vevo. Hive provides APIs to detect deepfakes and AI-generated artwork. In early 2023, Hive released a free demo text classifier intended to detect AI-generated text. Mark Hachman at PC World rated Hive's classifier favorably and found it more reliable than OpenAI's AI text classifier. == History == Hive was founded by Kevin Guo and Dmitriy Karpman, and in April 2021, announced $85M in new capital at a valuation of $2 billion.

  Read more →
• 

  Biohybrid microswimmer

  A biohybrid microswimmer also known as biohybrid nanorobot, can be defined as a microswimmer that consist of both biological and artificial constituents, for instance, one or several living microorganisms attached to one or various synthetic parts. In recent years nanoscopic and mesoscopic objects have been designed to collectively move through direct inspiration from nature or by harnessing its existing tools. Small mesoscopic to nanoscopic systems typically operate at low Reynolds numbers (Re ≪ 1), and understanding their motion becomes challenging. For locomotion to occur, the symmetry of the system must be broken. In addition, collective motion requires a coupling mechanism between the entities that make up the collective. To develop mesoscopic to nanoscopic entities capable of swarming behaviour, it has been hypothesised that the entities are characterised by broken symmetry with a well-defined morphology, and are powered with some material capable of harvesting energy. If the harvested energy results in a field surrounding the object, then this field can couple with the field of a neighbouring object and bring some coordination to the collective behaviour. Such robotic swarms have been categorised by an online expert panel as among the 10 great unresolved group challenges in the area of robotics. Although investigation of their underlying mechanism of action is still in its infancy, various systems have been developed that are capable of undergoing controlled and uncontrolled swarming motion by harvesting energy (e.g., light, thermal, etc.). Over the past decade, biohybrid microrobots, in which living mobile microorganisms are physically integrated with untethered artificial structures, have gained growing interest to enable the active locomotion and cargo delivery to a target destination. In addition to the motility, the intrinsic capabilities of sensing and eliciting an appropriate response to artificial and environmental changes make cell-based biohybrid microrobots appealing for transportation of cargo to the inaccessible cavities of the human body for local active delivery of diagnostic and therapeutic agents. == Background == Biohybrid microswimmers can be defined as microswimmers that consist of both biological and artificial constituents, for instance, one or several living microorganisms attached to one or various synthetic parts. The pioneers of this field, ahead of their time, were Montemagno and Bachand with a 1999 work regarding specific attachment strategies of biological molecules to nanofabricated substrates enabling the preparation of hybrid inorganic/organic nanoelectromechanical systems, so called NEMS. They described the production of large amounts of F1-ATPase from the thermophilic bacteria Bacillus PS3 for the preparation of F1-ATPase biomolecular motors immobilized on a nanoarray pattern of gold, copper or nickel produced by electron beam lithography. These proteins were attached to one micron microspheres tagged with a synthetic peptide. Consequently, they accomplished the preparation of a platform with chemically active sites and the development of biohybrid devices capable of converting energy of biomolecular motors into useful work. One of the most fundamental questions in science is what defines life. Collective motion is one of the hallmarks of life. This is commonly observed in nature at various dimensional levels as energized entities gather, in a concerted effort, into motile aggregated patterns. These motile aggregated events can be noticed, among many others, as dynamic swarms; e.g., unicellular organisms such as bacteria, locust swarms, or the flocking behaviour of birds. Ever since Newton established his equations of motion, the mystery of motion on the microscale has emerged frequently in scientific history, as famously demonstrated by a couple of articles that should be discussed briefly. First, an essential concept, popularized by Osborne Reynolds, is that the relative importance of inertia and viscosity for the motion of a fluid depends on certain details of the system under consideration. The Reynolds number Re, named in his honor, quantifies this comparison as a dimensionless ratio of characteristic inertial and viscous forces: R e = ρ u l μ {\displaystyle \mathrm {Re} ={\frac {\rho ul}{\mu }}} Here, ρ represents the density of the fluid; u is a characteristic velocity of the system (for instance, the velocity of a swimming particle); l is a characteristic length scale (e.g., the swimmer size); and μ is the viscosity of the fluid. Taking the suspending fluid to be water, and using experimentally observed values for u, one can determine that inertia is important for macroscopic swimmers like fish (Re = 100), while viscosity dominates the motion of microscale swimmers like bacteria (Re = 10−4). The overwhelming importance of viscosity for swimming at the micrometer scale has profound implications for swimming strategy. This has been discussed memorably by E. M. Purcell, who invited the reader into the world of microorganisms and theoretically studied the conditions of their motion. In the first place, propulsion strategies of large scale swimmers often involve imparting momentum to the surrounding fluid in periodic discrete events, such as vortex shedding, and coasting between these events through inertia. This cannot be effective for microscale swimmers like bacteria: due to the large viscous damping, the inertial coasting time of a micron-sized object is on the order of 1 μs. The coasting distance of a microorganism moving at a typical speed is about 0.1 angstroms (Å). Purcell concluded that only forces that are exerted in the present moment on a microscale body contribute to its propulsion, so a constant energy conversion method is essential. Microorganisms have optimized their metabolism for continuous energy production, while purely artificial microswimmers (microrobots) must obtain energy from the environment, since their on-board-storage-capacity is very limited. As a further consequence of the continuous dissipation of energy, biological and artificial microswimmers do not obey the laws of equilibrium statistical physics, and need to be described by non-equilibrium dynamics. Mathematically, Purcell explored the implications of low Reynolds number by taking the Navier-Stokes equation and eliminating the inertial terms: μ ∇ 2 u − ∇ p = 0 {\displaystyle {\begin{aligned}\mu \nabla ^{2}\mathbf {u} -{\boldsymbol {\nabla }}p&={\boldsymbol {0}}\\\end{aligned}}} where u {\displaystyle \mathbf {u} } is the velocity of the fluid and ∇ p {\displaystyle {\boldsymbol {\nabla }}p} is the gradient of the pressure. As Purcell noted, the resulting equation — the Stokes equation — contains no explicit time dependence. This has some important consequences for how a suspended body (e.g., a bacterium) can swim through periodic mechanical motions or deformations (e.g., of a flagellum). First, the rate of motion is practically irrelevant for the motion of the microswimmer and of the surrounding fluid: changing the rate of motion will change the scale of the velocities of the fluid and of the microswimmer, but it will not change the pattern of fluid flow. Secondly, reversing the direction of mechanical motion will simply reverse all velocities in the system. These properties of the Stokes equation severely restrict the range of feasible swimming strategies. Recent publications of biohybrid microswimmers include the use of sperm cells, contractive muscle cells, and bacteria as biological components, as they can efficiently convert chemical energy into movement, and additionally are capable of performing complicated motion depending on environmental conditions. In this sense, biohybrid microswimmer systems can be described as the combination of different functional components: cargo and carrier. The cargo is an element of interest to be moved (and possibly released) in a customized way. The carrier is the component responsible for the movement of the biohybrid, transporting the desired cargo, which is linked to its surface. The great majority of these systems rely on biological motile propulsion for the transportation of synthetic cargo for targeted drug delivery/ There are also examples of the opposite case: artificial microswimmers with biological cargo systems. Over the past decade, biohybrid microrobots, in which living mobile microorganisms are physically integrated with untethered artificial structures, have gained growing interest to enable the active locomotion and cargo delivery to a target destination. In addition to the motility, the intrinsic capabilities of sensing and eliciting an appropriate response to artificial and environmental changes make cell-based biohybrid microrobots appealing for transportation of cargo to the inaccessible cavities of the human body for local active delivery of diagnostic and therapeutic agents. Active locomotion, targeting and steering of concentrated therape

  Read more →
• 

  Comet (browser)

  Comet is an AI-powered web browser based on Chromium. It was released by Perplexity AI for Microsoft Windows and macOS on July 9, 2025, for Android on November 20, 2025, and for iOS on March 18, 2026. Initial access to the browser was limited to users subscribed to Perplexity's most expensive tier, with broader availability expected over time. The browser was released for free download in October 2025. == Features == Comet is integrated with Perplexity's AI-assisted search engine. The browser features an assistant which enables users to perform a variety of tasks such as generating article summaries, sending emails, or buying products. == Security concerns == Researchers at LayerX Security identified a malicious attack vector which they call CometJacking. The exploit could possibly exfiltrate a user's personal sensitive data to a remote server controlled by the attacker. LayerX attempted to responsibly disclose their findings to Comet's developer Perplexity AI in August 2025. Perplexity responded that they saw no security impact and marked the disclosure as not applicable.

  Read more →
• 

  Colossus (supercomputer)

  Colossus is a supercomputer developed by xAI. Construction began in 2024 in Memphis, Tennessee; the system became operational in July 2024. It is currently the world's largest AI supercomputer. Colossus's primary purpose is to train the company's chatbot, Grok. In addition, Colossus provides computing support to the social-media platform X and to other projects of Elon Musk, such as SpaceX. In 2025, it expanded to neighboring Southaven, Mississippi across the Tennessee–Mississippi border. As of May 6, 2026, Anthropic has agreed to rent all compute capacity at the Colossus 1 data center. == Background == Colossus was launched in September 2024 at a former Electrolux site in South Memphis to train the AI language model Grok. Within 19 days of the project's conception, xAI was ready to begin construction. The site was chosen because the abandoned Electrolux building could be repurposed to expedite construction and its proximity to a nearby wastewater treatment facility provided a water source. As of February 2025, xAI plans to build an $80 million facility to process additional wastewater for use at the supercomputer. === xAI === Musk incorporated xAI in March 2023 with the stated purpose of understanding the "nature of the universe". The team includes former members of OpenAI, DeepMind, Microsoft, and Tesla. Musk was one of the founding members of the company OpenAI, investing up to US$45 million in 2015. He left OpenAI in 2018, reportedly to avoid conflicts of interest with Tesla. It has also been reported that he had made a bid for leadership at OpenAI and left when his proposal was rejected. The exact reasons for his departure from the company are unclear. Both Dell Technologies and Supermicro partnered with xAI to build the supercomputer. It was originally powered by 100,000 Nvidia graphics processing units (GPUs) and was constructed in 122 days. 3 months after the first 100,000 GPUs were deployed, xAI announced that they had increased the system to 200,000 GPUs and that they intended to continue increasing the computer's processing power to 1 million GPUs. As of April 2025, xAI claimed Colossus was the largest AI training platform in the world. == Choice of location == xAI selected Memphis, in southwestern Tennessee, as the site for Colossus in part because an existing industrial facility allowed the project to proceed more quickly than constructing a new data center. Elon Musk was initially told that building a data center would take 18–24 months. The company instead searched for a vacant facility and selected the former Electrolux factory in Memphis. Electrolux opened the facility in 2012 and operated it for about eight years before closing it in 2020 after relocating operations to Springfield, Tennessee. The building covered 785,000 sq ft (72,900 m2) and had been purchased by Phoenix Investors in December 2023 for $35 million . Because the structure was already in place, work on the supercomputer could begin immediately rather than waiting for a new facility to be constructed. According to Forbes, xAI considered seven or eight other sites before selecting Memphis, and Musk finalized the decision to build in Memphis in about a week. The decision was finalized in March 2024, after which construction began. xAI publicly announced in June 2024 that Colossus would be built in Memphis. The building itself was not the only reason xAI selected Memphis. According to the Greater Memphis Chamber, the company chose the city because of its "reliable power grid, ability to create a water recycling facility, proximity to the Mississippi River and ample land". The city was also able to provide the large amounts of electricity and water needed to operate the supercomputer. At full capacity, the system was expected to require 150 megawatts of electricity and millions of gallons of water per day. The project also relied on partnerships with local and regional organizations including Memphis Light, Gas and Water (MLGW), Tennessee Valley Authority (TVA), the City of Memphis, and Shelby County. The city also provided financial incentives for the project. == Environmental impact == AI data centers consume large amounts of energy. At the site of Colossus in South Memphis, the grid connection was only 8 MW, so xAI applied to temporarily set up more than a dozen gas turbines (Voltagrid’s 2.5 MW units and Solar Turbines’ 16 MW SMT-130s) which would steadily burn methane gas from a 16-inch natural gas main. Aerial imagery in April 2025 showed 35 gas turbines had been set up at a combined 422 MW. These turbines have been estimated to generate about "72 megawatts, which is approximately 3% of the (TVA) power grid". The higher number of gas turbines and the subsequent emissions requires xAI to have a major source permit. In Memphis, xAI was able to avoid some environmental rules in the construction of Colossus, such as operating without permits for the on-site methane gas turbines because they are "portable". The Shelby County Health Department told NPR that "it only regulates gas-burning generators if they're in the same location for more than 364 days". However, in a January 2026 ruling, the EPA revised its New Source Performance Standard and announced that large methane gas turbines require permits even for temporary operations. In November 2024, the grid connection was upgraded to 150 MW, and some turbines were removed. Along with high electricity needs, the expected water demand is over five million gallons of water per day. While xAI has stated they plan to work with MLGW on a wastewater treatment facility and the installation of 50 megawatts of large battery storage facilities, there are currently no concrete plans in place aside from a one-page factsheet shared by MLGW. == Community response == The plan to build Colossus in Memphis was unknown to residents, City Council members, and environmental agencies. Many did not find out about the project until the day before, or the day of, as they watched the announcement on the local news. Keshaun Pearson, president of Memphis Community Against Pollution, stated that there is a historical lack of transparency and communication surrounding environmental issues in Memphis. Some community members in Memphis have expressed concern about the potential for additional air and water pollution caused by the supercomputer. In a letter to the Shelby County Health Department, the Southern Environmental Law Center stated the emissions from the turbines make the facility "...likely the largest industrial emitter of NOx in Memphis..." This is due to data supplied by the manufacturer showing that "...xAI emits between 1,200 and 2,000 tons of smog-forming nitrogen oxides (NOx)..." At a public Shelby County Commissioner's hearing on April 9, 2025, residents living near the site of Colossus voiced complaints about air quality, noting that they have chronic respiratory issues related to living in a polluted section of Memphis. One woman said she smells "everything but the right thing and the right thing is the clean air." Other residents voiced frustration that Brent Mayo, the senior xAI official responsible for building out xAI's infrastructure, did not attend the meeting to discuss community concerns. Keshaun Pearson also stated that "We're getting more and more days a year where it is unhealthy for us to go outside." People living near the site of Colossus have said they were not offered the opportunity for a public review of the plans, nor were they provided with information on how their community could potentially benefit. The community is also concerned about the strain on the power grid. Memphis's peak demand is around 3 GW. In November 2024, TVA approved xAI's request for access to more than 100 megawatts of power to Colossus which is supplied by MLGW. In December 2022, MLGW imposed (then rescinded) rolling blackouts during several days of extreme cold, straining the power grid. In a letter to the TVA, the SELC "urged the agency to 'prioritize Memphis families' access to reliable power over the 'secondary purpose' of serving xAI". == Current progress == In early December 2024, Ted Townsend detailed how the power of Colossus doubled in its processing capability. When it first went online in September 2024, it was using "100,000 Nvidia H100 processing chips". This initial launch demonstrated Colossus to be the largest supercomputer globally. The maximum power consumption increased from 150 to 250 MW. As of June 2025, the supercomputer consists of 150,000 H100 GPUs, 50,000 H200 GPUs, and 30,000 GB200 GPUs. Another 110,000 GB200 GPUs are to be brought online at a second data center, also in the Memphis area. The expansion of this supercomputer has already been discussed and will be the second phase of the project. xAI also plans to increase Colossus to 1 million GPUs. Because the supercomputer currently utilizes gas turbines for power, alongside 168 Tesla Megapack battery storage units. xAI is also looking to add more

  Read more →
• 

  DREAM Challenges

  DREAM Challenges (Dialogue for Reverse Engineering Assessment and Methods) is a non-profit initiative for advancing biomedical and systems biology research via crowd-sourced competitions. Started in 2006, DREAM challenges collaborate with Sage Bionetworks to provide a platform for competitions run on the Synapse platform. Over 60 DREAM challenges have been conducted over the span of over 15 years. == Overview == DREAM Challenges were founded in 2006 by Gustavo Stolovizky from IBM Research and Andrea Califano from Columbia University. Current chair of the DREAM organization is Paul Boutros from University of California. Further organization spans emeritus chairs Justin Guinney and Gustavo Stolovizky, and multiple DREAM directors. Individual challenges focus on tackling a specific biomedical research question, typically narrowed down to a specific disease. A prominent disease focus has been on oncology, with multiple past challenges focused on breast cancer, acute myeloid leukemia, and prostate cancer or similar diseases. The data involved in an individual challenge reflects the disease context; while cancers typically involve data such as mutations in the human genome, gene expression and gene networks in transcriptomics, and large scale proteomics, newer challenges have shifted towards single cell sequencing technologies as well as emerging gut microbiome related research questions, thus reflecting trends in the wider research community. Motivation for DREAM Challenges is that via crowd-sourcing data to a larger audience via competitions, better models and insight is gained than if the analysis was conducted by a single entity. Past competitions have been published in such scientific venues as the flagship journals of the Nature Portfolio and PLOS publishing groups. Results of DREAM challenges are announced via web platforms, and the top performing participants are invited to present their results in the annual RECOMB/ISCB Conferences with RSG/DREAM organized by the ISCB. While DREAM Challenges have emphasized open science and data, in order to mitigate issues rising from highly sensitive data such as genomics in patient cohorts, "model to data" approaches have been adopted. In such challenges participants submit their models via containers such as Docker or Singularity. This allows retaining confidentiality of the original data as these containers are then run by the organizers on the confidential data. This differs from the more traditional open data model, where participants submit predictions directly based on the provided open data. == Challenge organization == DREAM challenge comprises a core DREAM/Sage Bionetworks organization group as well as an extended scientific expert group, who may have contributed to creation and conception of the challenge or by providing key data. Additionally, new DREAM challenges may be proposed by the wider research community. Pharmaceutical companies or other private entities may also be involved in DREAM challenges, for example in providing data. == Challenge structure == Timelines for key stages (such as introduction webinars, model submission deadlines, and final deadline for participation) are provided in advance. After the winners are announced, organizers start collaborating with the top performing participants to conduct post hoc analyses for a publication describing key findings from the competition. Challenges may be split into sub-challenges, each addressing a different subtopic within the research question. For example, regarding cancer treatment efficacy predictions, these may be separate predictions for progression-free survival, overall survival, best overall response according to RECIST, or exact time until event (progression or death). == Participation == During DREAM challenges, participants typically build models on provided data, and submit predictions or models that are then validated on held-out data by the organizers. While DREAM challenges avoid leaking validation data to participants, there are typically mid-challenge submission leaderboards available to assist participants in evaluating their performance on a sub-sampled or scrambled dataset. DREAM challenges are free for participants. During the open phase anybody can register via Synapse to participate either individually or as a team. A person may only register once and may not use any aliases. There are some exceptions, which disqualify an individual from participating, for example: Person has privileged access to the data for the particular challenge, thus providing them with an unfair advantage. Person has been caught or is under suspicion of cheating or abusing previous DREAM Challenges. Person is a minor (under age 18 or the age of majority in jurisdiction of residence). This may be alleviated via parental consent.

  Read more →
• 

  Algorithmic probability

  In algorithmic information theory, algorithmic probability, also known as Solomonoff probability, is a mathematical method of assigning a prior probability to a given observation. It was invented by Ray Solomonoff in the 1960s. It is used in inductive inference theory and analyses of algorithms. In his general theory of inductive inference, Solomonoff uses the method together with Bayes' rule to obtain probabilities of prediction for an algorithm's future outputs. In the mathematical formalism used, the observations have the form of finite binary strings viewed as outputs of Turing machines, and the universal prior is a probability distribution over the set of finite binary strings calculated from a probability distribution over programs (that is, inputs to a universal Turing machine). The prior is universal in the Turing-computability sense, i.e. no string has zero probability. It is not computable, but it can be approximated. Formally, the probability P {\displaystyle P} is not a probability and it is not computable. It is only "lower semi-computable" and a "semi-measure". By "semi-measure", it means that 0 ≤ ∑ x P ( x ) < 1 {\displaystyle 0\leq \sum _{x}P(x)<1} . That is, the "probability" does not actually sum up to one, unlike actual probabilities. This is because some inputs to the Turing machine causes it to never halt, which means the probability mass allocated to those inputs is lost. By "lower semi-computable", it means there is a Turing machine that, given an input string x {\displaystyle x} , can print out a sequence y 1 < y 2 < ⋯ {\displaystyle y_{1} Read more →

• 

  Civitai

  Civitai is an online platform and marketplace for generative artificial intelligence (Gen AI) content, primarily focused on AI-generated images and models, and AI-generated videos. == History == Civitai was founded in 2022 by Justin Maier. By January 2023, the site reached 100,000 registered users and 3 million by November. In November 2023, Civitai secured funding from venture capital firm Andreessen Horowitz. By April 2024, Civitai had 23.2 million monthly accesses. The company is headquartered in Boise, Idaho. == Platform == Civitai allows users to share and download AI models, particularly those used for image generation. The platform supports various AI models, including Stable Diffusion and Flux, and provides a space for users to showcase and monetize their AI-generated content. Users have profile pages and can comment on other users' models and images. The website also features a virtual currency called Buzz that can be used to generate images on Civitai's servers. Buzz can be bought or earned by engaging with the site. The platform is open source. == Controversies == In 2023, 404 Media reported that Civitai began a "Bounties" marketplace where users could commission deepfakes, of real or fake people. Users are rewarded with Buzz for completing Bounties. In December 2023, AI provider OctoML announced it had ended its business relationship with Civitai after concerns were raised users were generating images that “could be categorized as child pornography.”

  Read more →
• 

  Danilo McGarry

  Danilo McGarry (born 1985) is a British tech executive, writer, and speaker who has led AI initiatives in finance and healthcare. == Early life and education == Danilo McGarry was born in 1985. He received a Bachelor of Science (BSc) with honors in Business Management from the University of Bath. == Career == McGarry began his career in technology and financial services, with positions at companies including Motorola, JPMorgan Chase, and BNP Paribas. He later joined the Royal Bank of Canada (RBC) as an analyst and later became a director, where he led transformation initiatives involving robotic process automation (RPA) in the bank's capital markets operations. McGarry subsequently moved into leadership roles focused on AI. At Citigroup, he served as Head of Artificial Intelligence and Machine Learning, where he launched an AI-driven robotics and automation initiative. At UnitedHealth Group (UHG), he held a senior role in the company's automation program, which utilized a large fleet of software robots in its healthcare operations. In December 2019, McGarry was appointed Global Head of AI & Automation at Alter Domus, a multinational financial services firm. In this role, he established a new AI and automation department. He left the firm in late 2023 to establish his businesses. In 2025, the Chartered Institute of Personnel and Development (CIPD) appointed him as its strategic adviser on artificial intelligence.

  Read more →
• 

  Drools

  Drools is a business rule management system (BRMS) with a forward and backward chaining inference-based rules engine, more correctly known as a production rule system, using an enhanced implementation of the Rete algorithm. Drools supports the Java Rules Engine API (Java Specification Request 94) standard for its business rule engine and enterprise framework for the construction, maintenance, and enforcement of business policies in an organization, application, or service. == Drools in Apache Kie == Drools, as part of the Kie Community has entered Apache Incubator in January, 2023. == Red Hat Decision Manager == Red Hat Decision Manager (formerly Red Hat JBoss BRMS) is a business rule management system and reasoning engine for business policy and rules development, access, and change management. JBoss Enterprise BRMS is a productized version of Drools with enterprise-level support available. JBoss Rules is also a productized version of Drools, but JBoss Enterprise BRMS is the flagship product. Components of the enterprise version: JBoss Enterprise Web Platform – the software infrastructure, supported to run the BRMS components only JBoss Enterprise Application Platform or JBoss Enterprise SOA Platform – the software infrastructure, supported to run the BRMS components only Business Rules Engine – Drools Expert using the Rete algorithm and the Drools Rule Language (DRL) Business Rules Manager – Drools Guvnor - Guvnor is a centralized repository for Drools Knowledge Bases, with rich web-based GUIs, editors, and tools to aid in the management of large numbers of rules. Business Rules Repository – Drools Guvnor Drools and Guvnor are JBoss Community open source projects. As they are mature, they are brought into the enterprise-ready product JBoss Enterprise BRMS. Components of the JBoss Community version: Drools Guvnor (Business Rules Manager) – a centralized repository for Drools Knowledge Bases Drools Expert (rule engine) – uses the rules to perform reasoning Drools Flow (process/workflow), or jBPM 5 – provides for workflow and business processes Drools Fusion (event processing/temporal reasoning) – provides for complex event processing Drools Planner/OptaPlanner (automated planning) – optimizes automated planning, including NP-hard planning problems == Example == This example illustrates a simple rule to print out information about a holiday in July. It checks a condition on an instance of the Holiday class, and executes Java code if that condition is true. The purpose of dialect "mvel" is to point the getter and setters of the variables of your Plain Old Java Object (POJO) classes. Consider the above example, in which a Holiday class is used and inside the circular brackets (parentheses) "month" is used. So with the help of dialect "mvel" the getter and setters of the variable "month" can be accessed. Dialect "java" is used to help us write our Java code in our rules. There is one restriction or characteristic on this. We cannot use Java code inside the "when" part of the rule but we can use Java code in the "then" part. We can also declare a Reference variable $h1 without the $ symbol. There is no restriction on this. The main purpose of putting the $ symbol before the variable is to mark the difference between variables of POJO classes and Rules.

  Read more →
• 

  Document-oriented database

  A document-oriented database, or document store, is a computer program and data storage system designed for storing, retrieving, and managing document-oriented information, also known as semi-structured data. Document-oriented databases are one of the main categories of NoSQL databases, and the popularity of the term "document-oriented database" has grown alongside the adoption of NoSQL itself. XML databases are a subclass of document-oriented databases optimized for XML documents. Graph databases are similar, but add another layer, the relationship, which allows them to link documents for rapid traversal. Document-oriented databases are conceptually an extension of the key–value store, another type of NoSQL database. In key-value stores, data is treated as opaque by the database, whereas document-oriented systems exploit the internal structure of documents to extract metadata and optimize storage and queries. Although in practice the distinction can be minimal due to modern tooling, document stores are designed to provide a richer programming experience with modern programming techniques. Document databases differ significantly from traditional relational databases (RDBs). Relational databases store data in predefined tables, often requiring an object to be split across multiple tables. In contrast, document databases store all information for a given object in a single document, with each document potentially having a unique structure. This design eliminates the need for object-relational mapping when loading data into the database. == Documents == The central concept of a document-oriented database is the notion of a document. Although implementations vary in their specific definitions, document-oriented databases generally treat documents as self-contained units that encapsulate and encode data in a standardized format. Common encoding formats include XML, YAML, JSON, as well as binary representations such as BSON. Documents in a document store are equivalent to the programming concept of an object. They are not required to adhere to a fixed schema, and documents within the same collection may contain different fields or structures. Fields may be optional, and documents of the same logical type may differ in composition. For example, the following illustrates a document encoded in JSON: A second document might be encoded in XML as: The two example documents share some structural elements but also contain unique fields. The structure, text, and other data within each document are collectively referred to as the document's content and can be accessed or modified using retrieval or editing operations. Unlike relational databases, in which each record contains the same fields and unused fields are left empty, document-oriented databases do not require uniform fields across documents. This design allows new information to be added to some documents without affecting the structure of others. Document databases often support the storage of additional metadata alongside the document content. Such metadata may relate to organizational features, security, indexing, or other implementation-specific features. === CRUD operations === The core operations supported by a document-oriented database for manipulating documents are similar to those in other databases. Although terminology is not perfectly standardized, these operations are generally recognized as Create, Read, Update, and Delete (CRUD). Creation (C): Adds a new document to the database. Retrieval (R): Retrieves documents or fields based on queries. Update (U): Modifies the contents of existing documents. Deletion (D): Removes documents from the database. === Keys === Documents in a document-oriented database are addressed via a unique identifier. This identifier, often a string, URI, or path, can be used to retrieve the document from the database. Most document stores maintain an index on the key to optimize retrieval, and in some implementations the key is required when creating or inserting a new document. === Retrieval === In addition to key-based access, document-oriented databases typically provide an API or query language that enables retrieval based on document content or associated metadata. For example, a query may return all documents with a specific field matching a given value. The available query features, indexing options, and performance characteristics vary across implementations. Document stores differ from key-value stores in that they exploit the internal structure and metadata of stored documents. In many key-value stores, values are treated as opaque or "black-box" data, meaning the database system does not interpret their internal structure. By contrast, document-oriented databases can classify and interpret document content. This enables queries that distinguish between types of data––for example, retrieving all phone numbers containing "555" without also matching a postal code such as "55555." === Editing === Document databases typically provide mechanisms for updating or editing the content or metadata of a document. Updates may involve replacing the entire document or modifying individual elements or fields within the document. === Organization === Document database implementations support a variety of methods for organizing documents, including: Collections: Groups of documents. Depending on the implementation, a document may be required to belong to a single collection or may be allowed in multiple collections. Tags and non-visible metadata: Additional data stored outside the main document content. Directory hierarchies: Documents organized in a tree-like structure, often based on path or URI. These organizational structures may differ between logical and physical representations (e.g. on disk or in memory). == Relationship to other databases == === Relationship to key-value stores === A document-oriented database can be viewed as a specialized form of key-value store, which is itself a category of NoSQL database. In a basic key-value store, the stored value is typically treated as opaque by the database system. By contrast, a document-oriented database provides APIs or a query and update language that allows queries and modifications based on the internal structure of the document. For users who do not require advanced query, retrieval, or update capabilities, the distinction between document-oriented databases and key-value stores may be minimal. === Relationship to search engines === Some search engine and information retrieval systems, such as Apache Solr and Elasticsearch, provide document storage and support core document operations. As a result, they may meet certain functional definitions of a document-oriented database, although their primary design goals differ. === Relationship to relational databases === In a relational database, data is organized into predefined types represented as tables. Each table contains rows (records) with a fixed set of columns (fields), so all records in a table share the same structure. Administrators typically define indexes on selected fields to improve query performance. A central principle of relational database design is database normalization, in which data that might otherwise be repeated is stored in separate tables and linked using keys. When records in different tables are related, a foreign key is used to associate them. For example, an address book application may store a contact's name, image, phone numbers, mailing addresses, and email addresses. In a normalized relational design, separate tables might be created for contacts, phone numbers, and email addresses. The phone number table would include a foreign key referencing the associated contact. To reconstruct a complete contact record, the database retrieves related information from each table using the foreign keys and combines it into a single record. In contrast, a document-oriented database stores all data related to an object within a single document, and stored in the database as a single entry. In the address book example,the contact's name, image, and contact information may be stored together in one document. The document is retrieved using a unique key, and all related information is returned together, without needing to look up multiple tables. A key difference between the document-oriented and relational models is that the data formats are not predefined in the document case. In most cases, any sort of document can be stored in a database, and documents can change in type and form over time. For example, a new field such as COUNTRY_FLAG can be added to new documents as they are inserted without affecting existing documents. To aid retrieval, document-oriented systems generally allow the administrator to provide hints to the database for locating certain types of information. These hints work in a similar fashion to indexes in relational databases. Many systems also allow additional metadata outside the content of the document itself

  Read more →
• 

  Sarah Guo

  Sarah Guo is an American tech investor. She is the founder of the venture capital firm Conviction and formerly a general partner at Greylock Partners. == Early life and education == Guo grew up in Wisconsin. Her parents worked for Bell Labs. After attending Phillips Academy, she graduated from the University of Pennsylvania and its Wharton School. She received a Bachelor of Arts, a Bachelor of Science, a Master of Business Administration (M.B.A.), and a Master of Arts from the University of Pennsylvania. == Career == As a teenager, Guo worked at Casa Systems, a cloud networking company founded by her parents that launched in 2003 and went public in 2017. She then worked at Goldman Sachs. In 2013, Guo joined Greylock Partners. While still in her twenties, she became the firm's youngest General Partner. Guo left Greylock in July 2022, and in October of that year, launched a new early-stage venture capital firm focused on AI with $101 million. In 2025, Conviction raised a second fund in late 2024 with Mike Vernal. Conviction's investments include early investments in Baseten, Cognition AI, OpenEvidence, Harvey, HeyGen, Mistral AI, Sierra Platform, Sunday Robotics, and Thinking Machines Lab. Guo appears in media outlets, as an expert in AI, infrastructure, business software, cybersecurity, technology policy and software engineering. Guo is on the Midas List and the Midas Seed List of top investors. She co-hosts the podcast No Priors with tech founder and super angel Elad Gil. == Personal life == Guo is married to Pat Grady of Sequoia Capital.

  Read more →
• 

  AI Futures Project

  The AI Futures Project is a nonprofit research organization based in the United States that specializes in forecasting the development and societal impact of advanced artificial intelligence. The organization is best known for its 2025 scenario forecast, AI 2027, which examines the potential near-term emergence of artificial general intelligence (AGI) and its possible global consequences. == History == The AI Futures Project was founded in 2025 by Daniel Kokotajlo, a former researcher in the governance division of OpenAI. Kokotajlo resigned from OpenAI in April 2024, expressing concerns that the company prioritized rapid product development over AI safety and was advancing without sufficient safeguards. He founded the nonprofit to conduct independent forecasting and policy research. The organization is registered as a 501(c)(3) nonprofit in the United States and is funded through donations. It operates with a small research staff and network of advisors drawn from fields including AI policy, forecasting, and risk analysis. == Activities == The mission of the AI Futures Project is to develop detailed scenario forecasts of the trajectory of advanced AI systems to inform policymakers, researchers, and the public. In addition to written reports, the group has conducted tabletop exercises and workshops based on its scenarios, involving participants from academia, technology, and public policy. == AI 2027 == In April 2025, the AI Futures Project released AI 2027, a detailed scenario forecast describing possible developments in AI between 2025 and 2027. The report was authored by Daniel Kokotajlo along with Eli Lifland, Thomas Larsen, and Romeo Dean, with editing assistance from blogger Scott Alexander. The scenario depicts very rapid progress in AI capabilities, including the development of autonomous AI systems capable of recursive self-improvement. AI 2027 presents two alternative endings: one in which international competition over advanced AI leads to catastrophic loss of human control, and another in which coordinated global action slows down development and averts imminent disaster. The authors emphasize that the narratives are hypothetical and intended as planning tools rather than literal forecasts. == Reception == AI 2027 attracted attention from technology journalists and AI researchers. Some commentators praised the report for its level of detail and its usefulness as a strategic planning exercise, while others criticized the scenario as implausibly aggressive in its timelines. The report was cited in policy discussions about AI governance. U.S. Vice President JD Vance reportedly read AI 2027 and referenced its warnings in conversations about international AI coordination. More recent reporting noted that the authors of AI 2027 had publicly revised some of their timelines. According to Kokotajlo, developments since the report's original publication suggested a slower path toward fully autonomous AI research systems than initially forecasted.

  Read more →