AI Assistant Esri

AI Assistant Esri — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Cooperative storage cloud

    Cooperative storage cloud

    A cooperative storage cloud is a decentralized model of networked online storage where data is stored on multiple computers (nodes), hosted by the participants cooperating in the cloud. For the cooperative scheme to be viable, the total storage contributed in aggregate must be at least equal to the amount of storage needed by end users. However, some nodes may contribute less storage and some may contribute more. There may be reward models to compensate the nodes contributing more. Unlike a traditional storage cloud, a cooperative does not directly employ dedicated servers for the actual storage of the data, thereby eliminating the need for a significant dedicated hardware investment. Each node in the cooperative runs specialized software which communicates with a centralized control and orchestration server, thereby allowing the node to both consume and contribute storage space to the cloud. The centralized control and orchestration server requires several orders of magnitude less resources (storage, computing power, and bandwidth) to operate, relative to the overall capacity of the cooperative. == Data security == Files hosted in the cloud are fragmented and encrypted before leaving the local machine. They are then distributed randomly using a load balancing and geo-distribution algorithm to other nodes in the cooperative. Users can add an additional layer of security and reduce storage space by compressing and encrypting files before they are copied to the cloud. == Data redundancy == In order to maintain data integrity and high availability across a relatively unreliable set of computers over a wide area network like the Internet, the source node will add some level of redundancy to each data block. This allows the system to recreate the entire block even if some nodes are temporarily unavailable (due to loss of network connectivity, the machine being powered off or a hardware failure). The most storage and bandwidth efficient forms of redundancy use erasure coding techniques like Reed–Solomon. A simple, less CPU intensive but more expensive form of redundancy is duplicate copies. == Flexible contribution == Due to bandwidth or hardware constraints some nodes may not be able to contribute as much space as they consume in the cloud. On the other hand, nodes with large storage space and limited or no bandwidth constraints may contribute more than they consume, thereby the cooperative can stay in balance.

    Read more →
  • LipNet

    LipNet

    LipNet is a deep neural network for audio-visual speech recognition (ASVR). It was created by University of Oxford researchers Yannis Assael, Brendan Shillingford, Shimon Whiteson, and Nando de Freitas. The researchers stated that could match mouth movements to text with 93 percent accuracy, though it was criticized for its test using a limited dataset of words and grammar. It was used in Nvidia's autonomous "backseat driver" prototype Co-Pilot.

    Read more →
  • OpenNN

    OpenNN

    OpenNN (Open Neural Networks Library) is a software library written in the C++ programming language which implements neural networks, a main area of deep learning research. The library is open-source, licensed under the GNU Lesser General Public License. == Characteristics == The software implements any number of layers of non-linear processing units for supervised learning. This deep architecture allows the design of neural networks with universal approximation properties. Additionally, it allows multiprocessing programming by means of OpenMP, in order to increase computer performance. OpenNN contains machine learning algorithms as a bundle of functions. These can be embedded in other software tools, using an application programming interface, for the integration of the predictive analytics tasks. In this regard, a graphical user interface is missing but some functions can be supported by specific visualization tools. == History == The development started in 2003 at the International Center for Numerical Methods in Engineering, within the research project funded by the European Union called RAMFLOOD (Risk Assessment and Management of FLOODs). Then it continued as part of similar projects. OpenNN is being developed by the startup company Artelnics. == Applications == OpenNN is a general purpose artificial intelligence software package. It uses machine learning techniques for solving predictive analytics tasks in different fields. For instance, the library has been applied in the engineering, energy, or chemistry sectors.

    Read more →
  • Logico-linguistic modeling

    Logico-linguistic modeling

    Logico-linguistic modeling is a method for building knowledge-based systems with a learning capability using conceptual models from soft systems methodology, modal predicate logic, and logic programming languages such as Prolog. == Overview == Logico-linguistic modeling is a six-stage method developed primarily for building knowledge-based systems (KBS), but it also has application in manual decision support systems and information source analysis. Logico-linguistic models have a superficial similarity to John F. Sowa's conceptual graphs; both use bubble style diagrams, both are concerned with concepts, both can be expressed in logic and both can be used in artificial intelligence. However, logico-linguistic models are very different in both logical form and in their method of construction. Logico-linguistic modeling was developed in order to solve theoretical problems found in the soft systems method for information system design. The main thrust of the research into has been to show how soft systems methodology (SSM), a method of systems analysis, can be extended into artificial intelligence. == Background == SSM employs three modeling devices i.e. rich pictures, root definitions, and conceptual models of human activity systems. The root definitions and conceptual models are built by stakeholders themselves in an iterative debate organized by a facilitator. The strengths of this method lie, firstly, in its flexibility, the fact that it can address any problem situation, and, secondly, in the fact that the solution belongs to the people in the organization and is not imposed by an outside analyst. Information requirements analysis (IRA) took the basic SSM method a stage further and showed how the conceptual models could be developed into a detailed information system design. IRA calls for the addition of two modeling devices: "Information Categories", which show the required information inputs and outputs from the activities identified in an expanded conceptual model; and the "Maltese Cross", a matrix which shows the inputs and outputs from the information categories and shows where new information processing procedures are required. A completed Maltese Cross is sufficient for the detailed design of a transaction processing system. The initial impetus to the development of logico-linguistic modeling was a concern with the theoretical problem of how an information system can have a connection to the physical world. This is a problem in both IRA and more established methods (such as SSADM) because none base their information system design on models of the physical world. IRA designs are based on a notional conceptual model and SSADM is based on models of the movement of documents. The solution to these problems provided a formula that was not limited to the design of transaction processing systems but could be used for the design of KBS with learning capability. == The six stages of logico-linguistic modeling == The logico-linguistic modeling method comprises six stages. === 1. Systems analysis === In the first stage logico-linguistic modeling uses SSM for systems analysis. This stage seeks to structure the problem in the client organization by identifying stakeholders, modelling organizational objectives and discussing possible solutions. At this stage it not assumed that a KBS will be a solution and logico-linguistic modeling often produces solutions that do not require a computerized KBS. Expert systems tend to capture the expertise, of individuals in different organizations, on the same topic. By contrast a KBS, produced by logico-linguistic modeling, seeks to capture the expertise of individuals in the same organization on different topics. The emphasis is on the elicitation of organizational or group knowledge rather than individual experts. In logico-linguistic modeling the stakeholders become the experts. The end point of this stage is an SSM style conceptual models such as figure 1. === 2. Language creation === According to the theory behind logico-linguistic modeling the SSM conceptual model building process is a Wittgensteinian language-game in which the stakeholders build a language to describe the problem situation. The logico-linguistic model expresses this language as a set of definitions, see figure 2. === 3. Knowledge elicitation === After the model of the language has been built putative knowledge about the real world can be added by the stakeholders. Traditional SSM conceptual models contain only one logical connective (a necessary condition). In order to represent causal sequences, "sufficient conditions" and "necessary and sufficient conditions" are also required. In logico-linguistic modeling this deficiency is remedied by two addition types of connective. The outcome of stage three is an empirical model, see figure 3. === 4. Knowledge representation === Modal predicate logic (a combination of modal logic and predicate logic) is used as the formal method of knowledge representation. The connectives from the language model are logically true (indicated by the "L" modal operator) and connective added at the knowledge elicitation stage are possibility true (indicated by the "M" modal operator). Before proceeding to stage 5, the models are expressed in logical formulae. === 5. Computer code === Formulae in predicate logic translate easily into the Prolog artificial intelligence language. The modality is expressed by two different types of Prolog rules. Rules taken from the language creation stage of model building process are treated as incorrigible. While rules from the knowledge elicitation stage are marked as hypothetical rules. The system is not confined to decision support but has a built in learning capability. === 6. Verification === A knowledge based system built using this method verifies itself. Verification takes place when the KBS is used by the clients. It is an ongoing process that continues throughout the life of the system. If the stakeholder beliefs about the real world are mistaken this will be brought out by the addition of Prolog facts that conflict with the hypothetical rules. It operates in accordance to the classic principle of falsifiability found in the philosophy of science == Applications == === Knowledge-based computer systems === Logico-linguistic modeling has been used to produce fully operational computerized knowledge based systems, such as one for the management of diabetes patients in a hospital out-patients department. === Manual decision support === In other projects the need to move into Prolog was considered unnecessary because the printed logico-linguistic models provided an easy-to-use guide to decision making. For example, a system for mortgage loan approval === Information source analysis === In some cases a KBS could not be built because the organization did not have all the knowledge needed to support all their activities. In these cases logico-linguistic modeling showed shortcomings in the supply of information and where more was needed. For example, a planning department in a telecoms company == Criticism == While logico-linguistic modeling overcomes the problems found in SSM's transition from conceptual model to computer code, it does so at the expense of increased stakeholder constructed model complexity. The benefits of this complexity are questionable and this modeling method may be much harder to use than other methods. This contention has been exemplified by subsequent research. An attempt by researchers to model buying decisions across twelve companies using logico-linguistic modeling required simplification of the models and removal of the modal elements.

    Read more →
  • Israeli cybersecurity industry

    Israeli cybersecurity industry

    The Israeli cybersecurity industry is a rapidly growing sector within Israel's technology and innovation ecosystem. Israel is internationally recognized as a powerhouse in the cybersecurity domain, with numerous cybersecurity startups, established companies, research institutions, and government initiatives. Tel Aviv itself is being ranked 7th in annual list of best global tech ecosystems, as reported by the Jerusalem Post. == History == The roots of Israel's cybersecurity industry can be traced back to the country's strong focus on national security and intelligence. The establishment of elite military units such as Unit 8200, the Israeli Intelligence Corps unit responsible for signals intelligence and code decryption, played a significant role in the development of cybersecurity expertise in the country. Many former members of Unit 8200 have gone on to establish successful cybersecurity companies or join existing organizations, bringing their unique skill sets and experience to the private sector. == Market overview == As of 2024, Israel housed more than 450 cybersecurity startups and companies. In 2023, the value of exits by Israeli tech companies reached $7.5 billion. Israel's cybersecurity industry is characterized by a high concentration of startups develop new technologies in areas such as network security, endpoint protection, data security, cloud security, and threat intelligence. In recent years, the sector has attracted significant investment from both local and international venture capital firms, as well as major technology companies such as Microsoft, Google, and IBM. Several Israeli cybersecurity companies have gained global recognition and success, with some being acquired by major corporations or conducting successful initial public offerings (IPOs). === Key Israeli cybersecurity companies === Some key Israeli cybersecurity companies include: Check Point Software Technologies CyberArk Cato Networks Radware Wiz === Financial activity === Israel’s cybersecurity sector has seen significant financial activity. As of 2023, mergers and acquisitions in the cybersecurity sector totaled $2.8 billion. In the first quarter of 2024, the sector secured $846 million in private funding. == Background == The military experience helped much. Israel's mandatory military service, combined with the expertise developed within elite units such as Unit 8200, has fostered a strong talent pool with practical experience in cybersecurity. Israel's thriving startup ecosystem, often referred to as the "Startup Nation," has fostered an environment of innovation and collaboration that has contributed to the growth of the cybersecurity industry. Israeli cybersecurity companies often collaborate with international partners, both in the private and public sectors, to share knowledge and develop joint solutions. === Government Initiatives and Support === The government also supported well through various initiatives, such as the Israel National Cyber Directorate (INCD), which works to strengthen cybersecurity defenses and promote the development of the sector. === Academic institutions === Israeli universities and research centers are involved in cybersecurity research and education, contributing to the development of new technologies and training the next generation of cybersecurity professionals. Academic Tech transfer offices in Israel also facilitate the commercialization of cybersecurity technologies. Some academic institutions with cybersecurity laboratories include: Tel Aviv University Technion Ben-Gurion University

    Read more →
  • Xcon

    Xcon

    The R1, internally called XCON (Expert Configurer), program was a production-rule-based system written in OPS5 by John P. McDermott of Carnegie Mellon University in 1978 to assist in the ordering of Digital Equipment Corporation's (DEC) VAX computer systems by automatically selecting the computer system components based on the customer's requirements. == Overview == In developing the system, McDermott made use of experts from both DEC's PDP/11 and VAX computer systems groups. These experts sometimes even disagreed amongst themselves as to an optimal configuration. The resultant "sorting it out" had an additional benefit in terms of the quality of VAX systems delivered. XCON first went into use in 1980 in DEC's plant in Salem, New Hampshire, US. It eventually had about 2500 rules. By 1986, it had processed 80,000 orders, and achieved 95–98% accuracy. It was estimated to be saving DEC $25M a year by reducing the need to give customers free components when technicians made errors, by speeding the assembly process, and by increasing customer satisfaction. Before XCON, when ordering a VAX from DEC, every cable, connection, and bit of software had to be ordered separately. (Computers and peripherals were not sold complete in boxes as they are today.) The sales people were not always very technically expert, so customers would find that they had hardware without the correct cables, printers without the correct drivers, a processor without the correct language chip, and so on. This meant delays and caused a lot of customer dissatisfaction and resultant legal action. XCON interacted with the sales person, asking critical questions before printing out a coherent and workable system specification/order slip. XCON's success led DEC to rewrite XCON as XSEL—a version of XCON intended for use by DEC's salesforce to aid a customer in properly configuring their VAX (so they would not, say, choose a computer too large to fit through their doorway or choose too few cabinets for the components to fit in). Location problems and configuration were handled by yet another expert system, XSITE. McDermott's 1980 paper on R1 won the Association for the Advancement of Artificial Intelligence (AAAI) Classic Paper Award in 1999. Footnote 2 gave a humorous explanation for the name "R1" as "Four years ago I couldn't even say "knowledge engineer", now I ... [are one.]".

    Read more →
  • Clinical quality management system

    Clinical quality management system

    Clinical quality management systems (CQMS) are systems used in the life sciences sector (primarily in the pharmaceutical, biologics and medical device industries) designed to manage quality management best practices throughout clinical research and clinical study management. A CQMS system is designed to manage all of the documents, activities, tasks, processes, quality events, relationships, audits and training that must be administered and controlled throughout the life of a clinical trial. The premise of a CQMS is to bring together the activities led by two sectors of clinical research, Clinical Quality and Clinical Operations, to facilitate cross-functional activities to improve efficiencies and transparency and to encourage the use of risk mitigation and risk management practices at the clinical study level. Based on the principles of quality management systems (QMS) which are used in many industries to create a framework for defining and delivering quality outcomes, managing risk, and continual improvement. Many guidelines and governance bodies have been established to ensure a common approach within a given industry to a set of parameters used to identify the minimally acceptable standard for that industry. The pharmaceutical industry is no exception, with several trade groups (e.g. PhRMA, EFPIA, RQA, etc.) coming together to enhance collaboration. However, as noted by the Academy of Medical Sciences, there are increasingly complex and bureaucratic legal and ethical frameworks that innovators must work within to develop new medicines for patients. The historical pharmaceutical QMS applies primarily to good manufacturing practice as described in existing ISO (International Organization for Standardization) and ICH (International Committee on Harmonization) guidelines. "Good Manufacturing Practices (GMP) relate to quality control and quality assurance enabling companies in the pharmaceutical sector to minimize or eliminate instances of contamination, mix-ups, and errors. This in turn, protects the customer from purchasing a product which is ineffective or even dangerous." These standards have historically been applied to the manufacturing environment, appropriate to how they have been written. However, according to FDA as well as other regulatory bodies, "Implementation of ICH Q10 throughout the product lifecycle should facilitate innovation and continual improvement", implying that the same standards that apply to the manufacturing environment should also be applied to the clinical research space, earlier in the lifecycle of an investigational or marketed product. Accordingly, a CQMS is any system developed to apply these principles to clinical operations within an organization.

    Read more →
  • Automatic1111

    Automatic1111

    AUTOMATIC1111 Stable Diffusion Web UI (SD WebUI, A1111, or Automatic1111) is an open source generative artificial intelligence program that allows users to generate images from a text prompt. It uses Stable Diffusion as the base model for its image capabilities together with a large set of extensions and features to customize its output. == History == SD WebUI was released on GitHub on August 22, 2022, by AUTOMATIC1111, 1 month after the initial release of Stable Diffusion. At the time, Stable Diffusion could only be run via the command line. SD WebUI quickly rose in popularity and has been described as "the most popular tool for running diffusion models locally." SD WebUI is one of the most popular user interfaces for Stable Diffusion, together with ComfyUI. In February 2024, a book was published by ja:Gijutsu Hyoronsha on using Stable Diffusion with SD WebUI in Japanese. As of July 2024, the project had 136,000 stars on GitHub. == Features == SD WebUI uses Gradio for its user interface. Each parameter in the Stable Diffusion program is exposed via a UI interface within SD WebUI. SD WebUI contains additional parameters not included in Stable Diffusion itself, such as support for Low-rank adaptations, ControlNet and custom variational autoencoders. SD WebUI supports prompt weighting, image-to-image based generation, inpainting, outpainting and image scaling. It supports over 20 samplers including DDIM, Euler, Euler a, DPM++ 2M Karras, and UniPC. It is also used for its various optimizations over the base Stable Diffusion. == Stable Diffusion WebUI Forge == Stable Diffusion WebUI Forge (Forge) is a notable fork of SD WebUI started by Lvmin Zhang, who is also the creator of ControlNet and Fooocus. The initial goal of Forge was to improve the performance and features of SD WebUI with the intention to upstream changes back to SD WebUI. One of Forge's optimizations allowed users with low VRAM to generate images faster on some versions of Stable Diffusion. It improved generation speed for users with 8GB and 6GB VRAM by 30-45% and 60-75%, respectively. Forge also includes extra features such as support for more samplers than standard SD WebUI. Some of Forge's optimizations were borrowed from ComfyUI, and others were developed by the Forge team. In August 2024, Forge added support for the Flux diffusion model developed by Black Forest Labs, which is not yet supported by SD WebUI.

    Read more →
  • Mozilla VPN

    Mozilla VPN

    Mozilla VPN is an open-source virtual private network developed by Mozilla. It launched in beta as Firefox Private Network on September 10, 2019, and officially launched on July 15, 2020, as Mozilla VPN. Mozilla VPN should not be confused with the built-in VPN in Firefox since version 149 released in March 2026, which is free with a monthly data limit of 50 GB but only masks traffic that originates in Firefox unlike Mozilla VPN that protects the entire device. == History == The Firefox Private Network web browser extension beta version was released on September 10, 2019, as part of the relaunch of Mozilla's Test Pilot Program, a program that allowed Firefox users to test experimental new features which had been shuttered in January 2019. The beta of the subscription-based standalone virtual private network for Android, Microsoft Windows, and Chromebook launched on February 19, 2020, with the iOS version following soon after. Firefox Private Network was rebranded as "Mozilla VPN" on June 18, 2020, and officially launched as Mozilla VPN on July 15, 2020. At launch, Mozilla VPN was available in six countries (the United States, Canada, the United Kingdom, Singapore, Malaysia, and New Zealand) for Windows 10, Android, and iOS (beta). Over time, the service also launched in Germany, France, Italy, Spain, Switzerland, Austria, Belgium, Netherlands, Ireland, Finland, Sweden, Poland, Czechia, Hungary, Romania, Bulgaria, Slovakia, Portugal, Denmark, Croatia, Lithuania, Slovenia, Latvia, Luxembourg, Estonia, Cyprus, and Malta. == Audits history == Cybersecurity firm Cure53 conducted a security audit for Mozilla VPN in August 2020 and identified multiple vulnerabilities, including one critical-severity vulnerability. In March 2021, Cure53 conducted a second security audit, which noted significant improvements since the 2020 audit. The second audit identified multiple issues, including two medium-severity and one high-severity vulnerability, but concluded that by the time of publication, only one vulnerability remained unresolved, and that it would require "a strong state-funded attacker-model" to be exploitable. Mozilla disclosed most of the vulnerabilities in July 2021 and released the full report by Cure53 in August 2021. In April 2023, Cure53 conducted a third security audit, the results of which Mozilla disclosed in December that year, along with the full report by Cure53. == Features == Mozilla VPN masks the user's IP address, hiding the user's location data from the websites accessed by the user, and encrypts all network activity. The service allows for up to 5 simultaneous connections, to any of more than 500 servers in 30+ countries, and is available on the mobile operating systems iOS and Android and the desktop operating systems Microsoft Windows, macOS and Linux. Mozilla VPN's infrastructure is provided by the Swedish Mullvad VPN service, which uses the WireGuard VPN protocol. The VPN software comes with additional features, like recommended server locations, the ability to block ads, block ad trackers and malware, the ability to exclude certain applications from protection, the ability to set multi-hop connections, and to set custom DNS servers. When used with Firefox and the official extension, Mozilla VPN allows the use of different settings per container as well as bypassing the VPN for specific websites.

    Read more →
  • Hubert Dreyfus

    Hubert Dreyfus

    Hubert Lederer Dreyfus ( DRY-fəs; October 15, 1929 – April 22, 2017) was an American philosopher and a professor of philosophy at the University of California, Berkeley. His main interests included phenomenology, existentialism and the philosophy of both psychology and literature, as well as the philosophical implications of artificial intelligence. He was widely known for his exegesis of Martin Heidegger, which critics labeled "Dreydegger". Dreyfus was featured in Tao Ruspoli's film Being in the World (2010), and was among the philosophers interviewed by Bryan Magee for the BBC Television series The Great Philosophers (1987). The Futurama character Professor Hubert Farnsworth is partly named after him, writer Eric Kaplan having been a former student. == Life and career == Dreyfus was born on 15 October 1929, in Terre Haute, Indiana, to Stanley S. and Irene (Lederer) Dreyfus. He attended Harvard University from 1947. With a senior honors thesis on Causality and Quantum Theory (for which W. V. O. Quine was the main examiner) he was awarded a B.A. summa cum laude in 1951 and joined Phi Beta Kappa. He was awarded a M.A. in 1952. He was a Teaching Fellow at Harvard from 1952 to 1953 (as he was again in 1954 and 1956). Then, on a Harvard Sheldon traveling fellowship, Dreyfus studied at the University of Freiburg from 1953 to 1954. During this time he had an interview with Martin Heidegger. Sean D. Kelly records that Dreyfus found the meeting 'disappointing.' A brief mention of it was made by Dreyfus during his 1987 BBC interview with Bryan Magee in remarks that are revealing of both his and Heidegger's opinion of the work of Jean-Paul Sartre. Between 1956 and 1957, Dreyfus undertook research at the Husserl Archives at the University of Louvain on a Fulbright Fellowship. Towards the end of his stay, his first (jointly authored) paper "Curds and Lions in Don Quijote" would appear in print. After acting as an instructor in philosophy at Brandeis University (1957–1959), he attended the Ecole Normale Supérieure, Paris, on a French government grant (1959–1960). From 1960, first as an instructor, then as an assistant and then associate professor, Dreyfus taught philosophy at the Massachusetts Institute of Technology (MIT). In 1964, with his dissertation Husserl's Phenomenology of Perception, he obtained his Ph.D. from Harvard. (Due to his knowledge of Husserl, Dagfinn Føllesdal sat on the thesis committee but he has asserted that Dreyfus "was not really my student.") That same year, his co-translation (with his first wife) of Sense and Non-Sense by Maurice Merleau-Ponty was published. Also in 1964, and whilst still at MIT, he was employed as a consultant by the RAND Corporation to review the work of Allen Newell and Herbert A. Simon in the field of artificial intelligence (AI). This resulted in the publication, in 1965, of the "famously combative" Alchemy and Artificial Intelligence, which proved to be the first of a series of papers and books attacking the AI field's claims and assumptions. The first edition of What Computers Can't Do would follow in 1972, and this critique of AI (which has been translated into at least ten languages) would establish Dreyfus's public reputation. However, as the editors of his Festschrift noted: "the study and interpretation of 'continental' philosophers... came first in the order of his philosophical interests and influences." === Berkeley === In 1968, although he had been granted tenure, Dreyfus left MIT and became an associate professor of philosophy at the University of California, Berkeley, (winning, that same year, the Harbison Prize for Outstanding Teaching). In 1972 he was promoted to full professor. Though Dreyfus retired from his chair in 1994, he continued as professor of philosophy in the Graduate School (and held, from 1999, a joint appointment in the rhetoric department). He continued to teach philosophy at UC Berkeley until his last class in December 2016. Dreyfus was elected a fellow of the American Academy of Arts and Sciences in 2001. He was also awarded an honorary doctorate for "his brilliant and highly influential work in the field of artificial intelligence" and his interpretation of twentieth century continental philosophy by Erasmus University. Dreyfus died on April 22, 2017. His younger brother and sometimes collaborator, Stuart Dreyfus, is a professor emeritus of industrial engineering and operations research at the University of California, Berkeley. == Dreyfus' criticism of AI == Dreyfus' critique of artificial intelligence (AI) concerns what he considers to be the four primary assumptions of AI research. The first two assumptions are what he calls the "biological" and "psychological" assumptions. The biological assumption is that the brain is analogous to computer hardware and the mind is analogous to computer software. The psychological assumption is that the mind works by performing discrete computations (in the form of algorithmic rules) on discrete representations or symbols. Dreyfus claims that the plausibility of the psychological assumption rests on two others: the epistemological and ontological assumptions. The epistemological assumption is that all activity (either by animate or inanimate objects) can be formalized (mathematically) in the form of predictive rules or laws. The ontological assumption is that reality consists entirely of a set of mutually independent, atomic (indivisible) facts. It's because of the epistemological assumption that workers in the field argue that intelligence is the same as formal rule-following, and it's because of the ontological one that they argue that human knowledge consists entirely of internal representations of reality. On the basis of these two assumptions, workers in the field claim that cognition is the manipulation of internal symbols by internal rules, and that, therefore, human behaviour is, to a large extent, context free (see contextualism). Therefore, a truly scientific psychology is possible, which will detail the 'internal' rules of the human mind, in the same way the laws of physics detail the 'external' laws of the physical world. However, it is this key assumption that Dreyfus denies. In other words, he argues that we cannot now (and never will be able to) understand our own behavior in the same way as we understand objects in, for example, physics or chemistry: that is, by considering ourselves as things whose behaviour can be predicted via 'objective', context free scientific laws. According to Dreyfus, a context-free psychology is a contradiction in terms. Dreyfus's arguments against this position are taken from the phenomenological and hermeneutical tradition (especially the work of Martin Heidegger). Heidegger argued that, contrary to the cognitivist views (on which AI has been based), our being is in fact highly context-bound, which is why the two context-free assumptions are false. Dreyfus doesn't deny that we can choose to see human (or any) activity as being 'law-governed', in the same way that we can choose to see reality as consisting of indivisible atomic facts... if we wish. But it is a huge leap from that to state that because we want to or can see things in this way that it is therefore an objective fact that they are the case. In fact, Dreyfus argues that they are not (necessarily) the case, and that, therefore, any research program that assumes they are will quickly run into profound theoretical and practical problems. Therefore, the current efforts of workers in the field are doomed to failure. Dreyfus argues that to get a device or devices with human-like intelligence would require them to have a human-like being-in-the-world and to have bodies more or less like ours, and social acculturation (i.e. a society) more or less like ours. (This view is shared by psychologists in the embodied psychology (Lakoff and Johnson 1999) and distributed cognition traditions. His opinions are similar to those of robotics researchers such as Rodney Brooks as well as researchers in the field of artificial life.) Contrary to a popular misconception, Dreyfus never predicted that computers would never beat humans at chess. In Alchemy and Artificial Intelligence, he only reported (correctly) the state of the art of the time: "Still no chess program can play even amateur chess." Daniel Crevier writes: "time has proven the accuracy and perceptiveness of some of Dreyfus's comments. Had he formulated them less aggressively, constructive actions they suggested might have been taken much earlier." == Webcasting philosophy == When UC Berkeley and Apple began making a selected number of lecture classes freely available to the public as podcasts beginning around 2006, a recording of Dreyfus teaching a course called "Man, God, and Society in Western Literature – From Gods to God and Back" rose to the 58th most popular webcast on iTunes. These webcasts have attracted the attention of many, including non-academics, to Dreyfus and his

    Read more →
  • Agent Communications Language

    Agent Communications Language

    Agent Communication Language (ACL) consists of computer communication protocols that are intended for AI agents to communicate with each other. In 2007, protocols of this nature were proposed which include: FIPA-ACL (by the Foundation for Intelligent Physical Agents, a standardization consortium) KQML (Knowledge Query and Manipulation Language) After the surge in Generative AI with the use of Transformers and Large language models, the definition of agent has shifted away from physical agents to signify software systems built using the principles of Agentic AI. A new protocol to emerge in this area is Natural Language Interaction Protocol (NLIP). NLIP is an application-level communication protocol defined between AI Agents or between a human and an AI agent. Ecma International; a standards body which develops and publishes international standards for the information and communication industry; published on 10 December 2025 five new standards and one technical report defining the Natural Language Interaction Protocol (NLIP). As a result, we can define agent communication protocols into two categories: ontology based agent communication protocols and generative AI based agent communication protocols. Ontology based agent communication protocols use a common ontology to be used between agents. An ontology is a part of the agent's knowledge base that describes what kind of things an agent can deal with and how they are related to each other. FIPA-ACL and KQML are examples of such protocols. These protocols rely on speech act theory developed by Searle in the 1960s and enhanced by Winograd and Flores in the 1970s. They define a set of performatives, also called Communicative Acts, and their meaning (e.g. ask-one). The content of the performative is not standardized, but varies from system to system. Implementation support of FIPA-ACL is included in FIPA-OS and Jade. Generative AI based agent communication protocols such as NLIP do not require a shared ontology among communicating agents. In its stead, they use generative AI models to translate natural language text, images, videos or other modalities of data into a local ontology. This provides for hot-extensibility where the same protocol can be used for multiple communication needs, and simplifies version control since different agents can use different versions of a shared ontology. NLIP has been designed with security considerations in mind. The specification and standards comprising NLIP are developed and maintained by Ecma Technical Community 56.

    Read more →
  • Goal node (computer science)

    Goal node (computer science)

    In computer science, a goal node is a node in a graph that meets defined criteria for success or termination. Heuristical artificial intelligence algorithms, like A and B, attempt to reach such nodes in optimal time by defining the distance to the goal node. When the goal node is reached, A defines the distance to the goal node as 0 and all other nodes' distances as positive values.

    Read more →
  • Stability (learning theory)

    Stability (learning theory)

    Stability, also known as algorithmic stability, is a notion in computational learning theory of how a machine learning algorithm output is changed with small perturbations to its inputs. A stable learning algorithm is one for which the prediction does not change much when the training data is modified slightly. For instance, consider a machine learning algorithm that is being trained to recognize handwritten letters of the alphabet, using 1000 examples of handwritten letters and their labels ("A" to "Z") as a training set. One way to modify this training set is to leave out an example, so that only 999 examples of handwritten letters and their labels are available. A stable learning algorithm would produce a similar classifier with both the 1000-element and 999-element training sets. Stability can be studied for many types of learning problems, from language learning to inverse problems in physics and engineering, as it is a property of the learning process rather than the type of information being learned. The study of stability gained importance in computational learning theory in the 2000s when it was shown to have a connection with generalization. It was shown that for large classes of learning algorithms, notably empirical risk minimization algorithms, certain types of stability ensure good generalization. == History == A central goal in designing a machine learning system is to guarantee that the learning algorithm will generalize, or perform accurately on new examples after being trained on a finite number of them. In the 1990s, milestones were reached in obtaining generalization bounds for supervised learning algorithms. The technique historically used to prove generalization was to show that an algorithm was consistent, using the uniform convergence properties of empirical quantities to their means. This technique was used to obtain generalization bounds for the large class of empirical risk minimization (ERM) algorithms. An ERM algorithm is one that selects a solution from a hypothesis space H {\displaystyle H} in such a way to minimize the empirical error on a training set S {\displaystyle S} . A general result, proved by Vladimir Vapnik for an ERM binary classification algorithms, is that for any target function and input distribution, any hypothesis space H {\displaystyle H} with VC-dimension d {\displaystyle d} , and n {\displaystyle n} training examples, the algorithm is consistent and will produce a training error that is at most O ( d n ) {\displaystyle O\left({\sqrt {\frac {d}{n}}}\right)} (plus logarithmic factors) from the true error. The result was later extended to almost-ERM algorithms with function classes that do not have unique minimizers. Vapnik's work, using what became known as VC theory, established a relationship between generalization of a learning algorithm and properties of the hypothesis space H {\displaystyle H} of functions being learned. However, these results could not be applied to algorithms with hypothesis spaces of unbounded VC-dimension. Put another way, these results could not be applied when the information being learned had a complexity that was too large to measure. Some of the simplest machine learning algorithms—for instance, for regression—have hypothesis spaces with unbounded VC-dimension. Another example is language learning algorithms that can produce sentences of arbitrary length. Stability analysis was developed in the 2000s for computational learning theory and is an alternative method for obtaining generalization bounds. The stability of an algorithm is a property of the learning process, rather than a direct property of the hypothesis space H {\displaystyle H} , and it can be assessed in algorithms that have hypothesis spaces with unbounded or undefined VC-dimension such as nearest neighbor. A stable learning algorithm is one for which the learned function does not change much when the training set is slightly modified, for instance by leaving out an example. A measure of Leave one out error is used in a Cross Validation Leave One Out (CVloo) algorithm to evaluate a learning algorithm's stability with respect to the loss function. As such, stability analysis is the application of sensitivity analysis to machine learning. == Summary of classic results == Early 1900s - Stability in learning theory was earliest described in terms of continuity of the learning map L {\displaystyle L} , traced to Andrey Nikolayevich Tikhonov. 1979 - Devroye and Wagner observed that the leave-one-out behavior of an algorithm is related to its sensitivity to small changes in the sample. 1999 - Kearns and Ron discovered a connection between finite VC-dimension and stability. 2002 - In a landmark paper, Bousquet and Elisseeff proposed the notion of uniform hypothesis stability of a learning algorithm and showed that it implies low generalization error. Uniform hypothesis stability, however, is a strong condition that does not apply to large classes of algorithms, including ERM algorithms with a hypothesis space of only two functions. 2002 - Kutin and Niyogi extended Bousquet and Elisseeff's results by providing generalization bounds for several weaker forms of stability which they called almost-everywhere stability. Furthermore, they took an initial step in establishing the relationship between stability and consistency in ERM algorithms in the Probably Approximately Correct (PAC) setting. 2004 - Poggio et al. proved a general relationship between stability and ERM consistency. They proposed a statistical form of leave-one-out-stability which they called CVEEEloo stability, and showed that it is a) sufficient for generalization in bounded loss classes, and b) necessary and sufficient for consistency (and thus generalization) of ERM algorithms for certain loss functions such as the square loss, the absolute value and the binary classification loss. 2010 - Shalev Shwartz et al. noticed problems with the original results of Vapnik due to the complex relations between hypothesis space and loss class. They discuss stability notions that capture different loss classes and different types of learning, supervised and unsupervised. 2016 - Moritz Hardt et al. proved stability of gradient descent given certain assumption on the hypothesis and number of times each instance is used to update the model. == Preliminary definitions == We define several terms related to learning algorithms training sets, so that we can then define stability in multiple ways and present theorems from the field. A machine learning algorithm, also known as a learning map L {\displaystyle L} , maps a training data set, which is a set of labeled examples ( x , y ) {\displaystyle (x,y)} , onto a function f {\displaystyle f} from X {\displaystyle X} to Y {\displaystyle Y} , where X {\displaystyle X} and Y {\displaystyle Y} are in the same space of the training examples. The functions f {\displaystyle f} are selected from a hypothesis space of functions called H {\displaystyle H} . The training set from which an algorithm learns is defined as S = { z 1 = ( x 1 , y 1 ) , . . , z m = ( x m , y m ) } {\displaystyle S=\{z_{1}=(x_{1},\ y_{1})\ ,..,\ z_{m}=(x_{m},\ y_{m})\}} and is of size m {\displaystyle m} in Z = X × Y {\displaystyle Z=X\times Y} drawn i.i.d. from an unknown distribution D. Thus, the learning map L {\displaystyle L} is defined as a mapping from Z m {\displaystyle Z_{m}} into H {\displaystyle H} , mapping a training set S {\displaystyle S} onto a function f S {\displaystyle f_{S}} from X {\displaystyle X} to Y {\displaystyle Y} . Here, we consider only deterministic algorithms where L {\displaystyle L} is symmetric with respect to S {\displaystyle S} , i.e. it does not depend on the order of the elements in the training set. Furthermore, we assume that all functions are measurable and all sets are countable. The loss V {\displaystyle V} of a hypothesis f {\displaystyle f} with respect to an example z = ( x , y ) {\displaystyle z=(x,y)} is then defined as V ( f , z ) = V ( f ( x ) , y ) {\displaystyle V(f,z)=V(f(x),y)} . The empirical error of f {\displaystyle f} is I S [ f ] = 1 n ∑ V ( f , z i ) {\displaystyle I_{S}[f]={\frac {1}{n}}\sum V(f,z_{i})} . The true error of f {\displaystyle f} is I [ f ] = E z V ( f , z ) {\displaystyle I[f]=\mathbb {E} _{z}V(f,z)} Given a training set S of size m, we will build, for all i = 1....,m, modified training sets as follows: By removing the i-th element S | i = { z 1 , . . . , z i − 1 , z i + 1 , . . . , z m } {\displaystyle S^{|i}=\{z_{1},...,\ z_{i-1},\ z_{i+1},...,\ z_{m}\}} By replacing the i-th element S i = { z 1 , . . . , z i − 1 , z i ′ , z i + 1 , . . . , z m } {\displaystyle S^{i}=\{z_{1},...,\ z_{i-1},\ z_{i}',\ z_{i+1},...,\ z_{m}\}} == Definitions of stability == === Hypothesis Stability === An algorithm L {\displaystyle L} has hypothesis stability β with respect to the loss function V if the following holds: ∀ i ∈ { 1 , . . . , m } , E S , z [ | V ( f S , z ) − V ( f S |

    Read more →
  • Cerebellar model articulation controller

    Cerebellar model articulation controller

    The cerebellar model arithmetic computer (CMAC) is a type of neural network based on a model of the mammalian cerebellum. It is also known as the cerebellar model articulation controller. It is a type of associative memory. The CMAC was first proposed as a function modeler for robotic controllers by James Albus in 1975 (hence the name), but has been extensively used in reinforcement learning and also as for automated classification in the machine learning community. The CMAC is an extension of the perceptron model. It computes a function for n {\displaystyle n} input dimensions. The input space is divided up into hyper-rectangles, each of which is associated with a memory cell. The contents of the memory cells are the weights, which are adjusted during training. Usually, more than one quantisation of input space is used, so that any point in input space is associated with a number of hyper-rectangles, and therefore with a number of memory cells. The output of a CMAC is the algebraic sum of the weights in all the memory cells activated by the input point. A change of value of the input point results in a change in the set of activated hyper-rectangles, and therefore a change in the set of memory cells participating in the CMAC output. The CMAC output is therefore stored in a distributed fashion, such that the output corresponding to any point in input space is derived from the value stored in a number of memory cells (hence the name associative memory). This provides generalisation. == Building blocks == In the adjacent image, there are two inputs to the CMAC, represented as a 2D space. Two quantising functions have been used to divide this space with two overlapping grids (one shown in heavier lines). A single input is shown near the middle, and this has activated two memory cells, corresponding to the shaded area. If another point occurs close to the one shown, it will share some of the same memory cells, providing generalisation. The CMAC is trained by presenting pairs of input points and output values, and adjusting the weights in the activated cells by a proportion of the error observed at the output. This simple training algorithm has a proof of convergence. It is normal to add a kernel function to the hyper-rectangle, so that points falling towards the edge of a hyper-rectangle have a smaller activation than those falling near the centre. One of the major problems cited in practical use of CMAC is the memory size required, which is directly related to the number of cells used. This is usually ameliorated by using a hash function, and only providing memory storage for the actual cells that are activated by inputs. == One-step convergent algorithm == Initially least mean square (LMS) method is employed to update the weights of CMAC. The convergence of using LMS for training CMAC is sensitive to the learning rate and could lead to divergence. In 2004, a recursive least squares (RLS) algorithm was introduced to train CMAC online. It does not need to tune a learning rate. Its convergence has been proved theoretically and can be guaranteed to converge in one step. The computational complexity of this RLS algorithm is O(N3). == Hardware implementation infrastructure == Based on QR decomposition, an algorithm (QRLS) has been further simplified to have an O(N) complexity. Consequently, this reduces memory usage and time cost significantly. A parallel pipeline array structure on implementing this algorithm has been introduced. Overall by utilizing QRLS algorithm, the CMAC neural network convergence can be guaranteed, and the weights of the nodes can be updated using one step of training. Its parallel pipeline array structure offers its great potential to be implemented in hardware for large-scale industry usage. == Continuous CMAC == Since the rectangular shape of CMAC receptive field functions produce discontinuous staircase function approximation, by integrating CMAC with B-splines functions, continuous CMAC offers the capability of obtaining any order of derivatives of the approximate functions. == Deep CMAC == In recent years, numerous studies have confirmed that by stacking several shallow structures into a single deep structure, the overall system could achieve better data representation, and, thus, more effectively deal with nonlinear and high complexity tasks. In 2018, a deep CMAC (DCMAC) framework was proposed and a backpropagation algorithm was derived to estimate the DCMAC parameters. Experimental results of an adaptive noise cancellation task showed that the proposed DCMAC can achieve better noise cancellation performance when compared with that from the conventional single-layer CMAC. == Summary ==

    Read more →
  • David Krueger (professor)

    David Krueger (professor)

    David Krueger is an American machine learning professor and advocate for the reduction of risks related to artificial intelligence. Krueger is an assistant professor in Robust, Reasoning, and Responsible AI at the University of Montreal and a Core Academic Member at Mila. == Early life and education == Krueger obtained a B.A. in mathematics from Reed College, and completed his MSc and Ph.D. in Computer Science at the University of Montreal. He trained in deep learning under Yoshua Bengio, Roland Memisevic, and Aaron Courville from 2013 to 2021. Krueger was also an intern on Google DeepMind's AI Safety team in 2018. == Career == Krueger researches deep learning, AI alignment, and AI safety. His work is focused on reducing the risk of human extinction resulting from out-of-control AI systems. Krueger was an assistant professor at the University of Cambridge from 2021 to 2024, before taking a faculty position at the University of Montreal in 2024. In 2023, he was a founding research director at the UK AI Security Institute. That same year, Krueger initiated the Statement on AI Risk, which argues that AI could cause human extinction and was signed by Anthropic's Dario Amodei, OpenAI's Sam Altman, AI expert Geoffrey Hinton, and other leaders. In April 2026, Krueger discussed the risks of advanced AI at a Capitol Hill event hosted by Senator Bernie Sanders. === Evitable === In 2025, Krueger founded Evitable, a nonprofit organization that advocates for an AI moratorium. == Views == Krueger argues that AI will lead to a "gradual disempowerment" of workers, likening AI chips to nuclear bombs. He also says the military use of AI "poses an existential risk to humanity."

    Read more →