AI Avatar Of Deceased

AI Avatar Of Deceased — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Nobody (username)

  In many Unix variants, "nobody" is the conventional name of a user identifier which owns no files, is in no privileged groups, and has no abilities except those which every other user has. It is normally not enabled as a user account, i.e. has no home directory or login credentials assigned. Some systems also define an equivalent group "nogroup". == Uses == The pseudo-user "nobody" and group "nogroup" are used, for example, in the NFSv4 implementation of Linux by idmapd, if a user or group name in an incoming packet does not match any known username on the system. It was once common to run daemons as nobody, especially on servers, in order to limit the damage that could be done by a malicious user who gained control of them. However, the usefulness of this technique is reduced if more than one daemon is run like this, because then gaining control of one daemon would provide control of them all. The reason is that processes owned by the same user have the ability to send signals to each other and use debugging facilities to read or even modify each other's memory. Modern practice, as recommended by the Linux Standard Base, is to create a separate user account for each daemon.

  Read more →
• 

  MicroTCA

  MicroTCA (short for Micro Telecommunications Computing Architecture, also: μTCA) is a modular, open standard, created and maintained by the PCI Industrial Computer Manufacturers Group (PICMG). It provides the electrical, mechanical, thermal and management specifications to create a switched fabric computer system, using Advanced Mezzanine Cards (AMC), connected directly to a backplane. MicroTCA is a descendant of the AdvancedTCA standard. == History == The rapid expansion of mobile telecommunications and their associated services (such as text messages) at the beginning of the millennium increased the demand of processing power in telecommunication systems. The existing "carrier grade" (see RAS) computing architectures were not fit to house the high performance processors of the time. In order to answer those demands, about 100 companies worked together in PICMG, resulting in the Advanced Telecommunications Architecture (AdvancedTCA, ATCA), published in 2002. After the introduction of AdvancedTCA, a standard was developed, to cater towards smaller telecommunications systems at the edge of the network. This standard was geared towards a more compact, less expensive systems, without cutting back on reliability or data throughput. This standard, called MicroTCA, was ratified 2006. MicroTCA systems migrated after its release into non-telecommunication sectors, like defence, avionics and science. This resulted in extensions to the base-standard, called modules. == Modules == === MicroTCA.0 === The base-specification for properties common to all other modules, ratified July 6, 2006. This includes: Mechanical specifications, like possible dimensions of card cages, backplanes and supported AMC-modules Electrical specifications, like power distribution and interface layout Thermal specifications, like possible cooling layouts or available cooling power Management specifications A second revision of the base-specifications was ratified January 16, 2020, containing some corrections, as well as alterations, necessary to implement higher speed Ethernet fabrics, like 10GBASE-KR and 40GBASE-KR4. === MicroTCA.1 === This module adds specifications for ruggedized systems, using forced air for cooling. Possible scenarios for MicroTCA.1-based systems include outside plant telecom, industrial and aerospace environments === MicroTCA.2 === This module adds specifications for more stringent requirements with regards to temperature, shock, vibration and other environmental conditions. These specifications are geared towards use in outside plant telecom, machine and transport industry, as well as military airborne, shipboard and ground mobile equipment. MicroTCA.2 allows the use of air- and conduction-cooled AMC-modules. === MicroTCA.3 === This module adds specifications for even more stringent requirements with regards to temperature, shock, vibration and other environmental conditions. These specifications are geared towards use in outside plant telecom, machine and transport industry, as well as military airborne, shipboard and ground mobile equipment. MicroTCA.3 requires the use of conduction-cooled AMC-modules. === MicroTCA.4 === This module extends the AMC with a Rear Transition Module (RTM), increasing PCB-space and modularity. AMC and RTM are connected with a connector, located in zone 3, defined in MicroTCA.0. These specifications are geared towards use in large-scale scientific devices, like particle accelerators or telescopes. == Components of MicroTCA == === Card Cage === The card cage (also: shelf, crate) houses all the other components and as such has two primary functions: Provide mechanical stability to the other components Ensure sufficient cooling There exist a wide array of card cages. They usually differ in: the type of modules they support (MTCA.0, MTCA.1, ...) the number of slots they provide (typically between 2 and 12) the architecture of the installed backplane (see below) the cooling scheme they use (i.e. airflow front-to-back, bottom-to-top, side-to-side, conductive,...) === Backplane === The backplane is a printed circuit board, mounted directly into the card cage. It connects all other components of a MicroTCA system to each other and provides power, data access and management access to them. Two types of power are distributed over the backplane, Management Power (+3.3 V) and Payload Power (+12 V). Unlike typical backplanes, where power is distributed to all components via a common "powerplane" in the PCB, on a MicroTCA backplane, Management and Payload Power are distributed to each component individually. While Management Power is provided to each module connected to a powered backplane, Payload Power has to be granted by the MicroTCA Carrier Hub (MCH), after ensuring that the module is MicroTCA-compatible. The standard defines various communication buses, which the backplane can/should provide: Gigabit Ethernet IPMI SATA Fat pipe (can be used for PCIe, SRIO or 10G/40G Ethernet) Point to Point Links Clocks JTAG === Cooling Unit === The Cooling Unit (CU) provides controlled air flow in air-flow-cooled card cages. It usually consists of an array of fans and a controller, which is connected to the backplane. The MicroTCA Carrier Hub (MCH) can read-out temperature sensors (if present) and fan speed, as well as change fan speed via IPMI. The Cooling Unit is usually fitted to a specific card cage. Some CUs are easily detachable (i.e. for cleaning or replacement), while other card cages come with integrated, non-detachable CUs. === Power Module === The Power Module (PM, also: Power Supply) converts the AC power from the power line to the +3.3 V Management Power (MP) and +12 V Payload Power (PP), both of which are DC. There exist a variety of power modules, which differ in: form factor (i.e. double width, single width) input voltage (110 V, 220 V, both) output power (i.e. 600 W, 1000 W) The power module senses the presence of a module in a slot via a specified pin in the module connector, and immediately provides that module with management power. Payload power is managed by the MicroTCA Carrier Hub (MCH), which communicates with the power module via IPMI. The power module uses its own type of connector, and can thus only be installed into designated slots, which in turn can't carry any other type of module. Some card cages provide an additional power module slot for redundancy. In such a case, one slot is the primary, which will provide power by default, and the other one is secondary, providing power only, if the primary does not. === MicroTCA Carrier Hub === The MicroTCA Carrier Hub (MCH) is the central managing device of a MicroTCA card cage. It manages power distribution and cooling. It usually also provides Gigabit Ethernet and/or PCIe/Serial RapidIO switching. Some MCHs additionally provide clocking. As the name indicates, they are the hub of various star topologies (i.e. for Ethernet, PCIe) on the backplane and thus require dedicated slot(s). Some backplanes support two MCHs for redundancy. In this case there are two MCH slots, with one being designated primary, and one secondary. === Advanced Mezzanine Card === Advanced Mezzanine Card (AMC) is a standard for hot-pluggable PCBs. It was originally developed to be used in AdvancedTCA systems. The standard specifies: the dimensions of the PCB with two width variants (single, double) and three height variants (Compact, Mid-size, Full) type, location and orientation of connectors (i.e. Zone 1, 2, 3) There is a huge variation of functionalities, an AMC can fulfill: Computing (i.e. a module with CPU, RAM, SSD and on-board graphics) Storage (i.e. SSD carrier) Graphics card FPGA card (i.e. for signal processing) FMC carrier Digitizer card (Analog-Digital and Digital-Analog Conversion) Clocking and Triggering and others === Rear Transition Module (MTCA.4 only) === The Rear Transition Module (RTM) was added in the MicroTCA.4 standard. It is connected directly to an AMC via a connector, located in zone 3, requiring a double width AMC and RTM. An RTM has about the same dimensions, as an AMC, basically doubling the available PCB-space per slot in an MTCA.4 card cage. Its power is provided by the AMC. Thus an RTM can not operate on its own, but requires a paired AMC. The zone 3 connector is electrically free configurable, making it possible, that a mechanically fitting AMC-RTM pair is electrically incompatible. To avoid damage due to that incompatibility, a mechanical code-pin was added to MTCA.4-compatible AMCs and RTMs, mechanically preventing the installation of an electrically incompatible RTM to an AMC. The functionality of RTMs includes, but is not limited to: RF-signal pre-/post-processing (i.e. filtering, Up-/Down-conversion, Vector De-/Modulation) Digital signal pre-/post-processing Clock-generation/-distribution Device interfaces Date storage CPU (only MCH-RTM)

  Read more →
• 

  Supercomputer operating system

  A supercomputer operating system is an operating system intended for supercomputers. Since the end of the 20th century, supercomputer operating systems have undergone major transformations, as fundamental changes have occurred in supercomputer architecture. While early operating systems were custom tailored to each supercomputer to gain speed, the trend has been moving away from in-house operating systems and toward some form of Linux, with it running all the supercomputers on the TOP500 list in November 2017. In 2021, top 10 computers run for instance Red Hat Enterprise Linux (RHEL), or some variant of it or other Linux distribution e.g. Ubuntu. Given that modern massively parallel supercomputers typically separate computations from other services by using multiple types of nodes, they usually run different operating systems on different nodes, e.g., using a small and efficient lightweight kernel such as Compute Node Kernel (CNK) or Compute Node Linux (CNL) on compute nodes, but a larger system such as a Linux distribution on server and input/output (I/O) nodes. While in a traditional multi-user computer system job scheduling is in effect a tasking problem for processing and peripheral resources, in a massively parallel system, the job management system needs to manage the allocation of both computational and communication resources, as well as gracefully dealing with inevitable hardware failures when tens of thousands of processors are present. Although most modern supercomputers use the Linux operating system, each manufacturer has made its own specific changes to the Linux distribution they use, and no industry standard exists, partly because the differences in hardware architectures require changes to optimize the operating system to each hardware design. == Context and overview == In the early days of supercomputing, the basic architectural concepts were evolving rapidly, and system software had to follow hardware innovations that usually took rapid turns. In the early systems, operating systems were custom tailored to each supercomputer to gain speed, yet in the rush to develop them, serious software quality challenges surfaced and in many cases the cost and complexity of system software development became as much an issue as that of hardware. In the 1980s the cost for software development at Cray came to equal what they spent on hardware and that trend was partly responsible for a move away from the in-house operating systems to the adaptation of generic software. The first wave in operating system changes came in the mid-1980s, as vendor specific operating systems were abandoned in favor of Unix. Despite early skepticism, this transition proved successful. By the early 1990s, major changes were occurring in supercomputing system software. By this time, the growing use of Unix had begun to change the way system software was viewed. The use of a high level language (C) to implement the operating system, and the reliance on standardized interfaces was in contrast to the assembly language oriented approaches of the past. As hardware vendors adapted Unix to their systems, new and useful features were added to Unix, e.g., fast file systems and tunable process schedulers. However, all the companies that adapted Unix made unique changes to it, rather than collaborating on an industry standard to create "Unix for supercomputers". This was partly because differences in their architectures required these changes to optimize Unix to each architecture. As general purpose operating systems became stable, supercomputers began to borrow and adapt critical system code from them, and relied on the rich set of secondary functions that came with them. However, at the same time the size of the code for general purpose operating systems was growing rapidly. By the time Unix-based code had reached 500,000 lines long, its maintenance and use was a challenge. This resulted in the move to use microkernels which used a minimal set of the operating system functions. Systems such as Mach at Carnegie Mellon University and ChorusOS at INRIA were examples of early microkernels. The separation of the operating system into separate components became necessary as supercomputers developed different types of nodes, e.g., compute nodes versus I/O nodes. Thus modern supercomputers usually run different operating systems on different nodes, e.g., using a small and efficient lightweight kernel such as CNK or CNL on compute nodes, but a larger system such as a Linux-derivative on server and I/O nodes. == Early systems == The CDC 6600, generally considered the first supercomputer in the world, ran the Chippewa Operating System, which was then deployed on various other CDC 6000 series computers. The Chippewa was a rather simple job control oriented system derived from the earlier CDC 3000, but it influenced the later KRONOS and SCOPE systems. The first Cray-1 was delivered to the Los Alamos Lab with no operating system, or any other software. Los Alamos developed the application software for it, and the operating system. The main timesharing system for the Cray 1, the Cray Time Sharing System (CTSS), was then developed at the Livermore Labs as a direct descendant of the Livermore Time Sharing System (LTSS) for the CDC 6600 operating system from twenty years earlier. In developing supercomputers, rising software costs soon became dominant, as evidenced by the 1980s cost for software development at Cray growing to equal their cost for hardware. That trend was partly responsible for a move away from the in-house Cray Operating System to UNICOS system based on Unix. In 1985, the Cray-2 was the first system to ship with the UNICOS operating system. Around the same time, the EOS operating system was developed by ETA Systems for use in their ETA10 supercomputers. Written in Cybil, a Pascal-like language from Control Data Corporation, EOS highlighted the stability problems in developing stable operating systems for supercomputers and eventually a Unix-like system was offered on the same machine. The lessons learned from developing ETA system software included the high level of risk associated with developing a new supercomputer operating system, and the advantages of using Unix with its large extant base of system software libraries. By the middle 1990s, despite the extant investment in older operating systems, the trend was toward the use of Unix-based systems, which also facilitated the use of interactive graphical user interfaces (GUIs) for scientific computing across multiple platforms. The move toward a commodity OS had opponents, who cited the fast pace and focus of Linux development as a major obstacle against adoption. As one author wrote "Linux will likely catch up, but we have large-scale systems now". Nevertheless, that trend continued to gain momentum and by 2005, virtually all supercomputers used some Unix-like OS. These variants of Unix included IBM AIX, the open source Linux system, and other adaptations such as UNICOS from Cray. By the end of the 20th century, Linux was estimated to command the highest share of the supercomputing pie. == Modern approaches == The IBM Blue Gene supercomputer uses the CNK operating system on the compute nodes, but uses a modified Linux-based kernel called I/O Node Kernel (INK) on the I/O nodes. CNK is a lightweight kernel that runs on each node and supports a single application running for a single user on that node. For the sake of efficient operation, the design of CNK was kept simple and minimal, with physical memory being statically mapped and the CNK neither needing nor providing scheduling or context switching. CNK does not even implement file I/O on the compute node, but delegates that to dedicated I/O nodes. However, given that on the Blue Gene multiple compute nodes share a single I/O node, the I/O node operating system does require multi-tasking, hence the selection of the Linux-based operating system. While in traditional multi-user computer systems and early supercomputers, job scheduling was in effect a task scheduling problem for processing and peripheral resources, in a massively parallel system, the job management system needs to manage the allocation of both computational and communication resources. It is essential to tune task scheduling, and the operating system, in different configurations of a supercomputer. A typical parallel job scheduler has a master scheduler which instructs some number of slave schedulers to launch, monitor, and control parallel jobs, and periodically receives reports from them about the status of job progress. Some, but not all supercomputer schedulers attempt to maintain locality of job execution. The PBS Pro scheduler used on the Cray XT3 and Cray XT4 systems does not attempt to optimize locality on its three-dimensional torus interconnect, but simply uses the first available processor. On the other hand, IBM's scheduler on the Blue Gene supercomputers aims to exploit locality a

  Read more →
• 

  Algorithmic amplification

  Algorithmic amplification is the process by which automated ranking and recommendation systems on digital platforms increase the visibility of certain content beyond its initial audience. Major platforms including Facebook, YouTube, TikTok, and X (formerly Twitter) use such systems to determine what appears in users' feeds and search results. The term is used in research on social media and digital media regulation to describe how platform design choices influence the distribution of online information. Unlike chronological feeds, algorithmic systems evaluate content using signals such as engagement rates, viewing duration, and predicted relevance to individual users. Content that performs strongly on these metrics may be promoted to progressively larger audiences through feeds, search rankings, or autoplay systems. The process is distinct from content moderation, which involves removing, labelling, or restricting content under platform rules, although the two can interact in practice. The concept is closely connected to the attention economy. Research has linked algorithmic amplification to the spread of misinformation and the circulation of political content, as well as to effects on young users' mental health. The scale and direction of those effects remain debated, in part because independent researchers have limited access to the internal workings of platform recommendation systems. Governments in the European Union, United Kingdom, United States, and China have pursued differing regulatory approaches to recommendation algorithms. The EU's Digital Services Act and the UK's Online Safety Act 2023 impose obligations on large platforms related to recommendation system transparency and risk, while China became the first country to enact binding legislation specifically targeting such systems. Internal documents and whistleblower testimony reported by the BBC in 2026 described how competitive pressure between Meta and TikTok led to trade-offs between engagement and user safety in the design of their recommendation systems. == Terminology == The term algorithmic amplification is used in media studies, platform governance scholarship and regulatory literature to describe how automated systems influence the distribution of content beyond what organic user sharing alone would produce. It is distinct from viral spread, which refers primarily to user-driven sharing behaviour, and from algorithmic bias, which describes systematic errors or unfairness in algorithmic outputs. The related term algorithmic curation is used for the broader process of selecting and ordering content, of which amplification is one possible outcome. The phrase also appears in regulatory and legislative discussion of recommendation systems. The European Union's Digital Services Act (DSA) identifies recommendation systems as a potential source of systemic risk, and the term appears frequently in academic and policy commentary on the regulation. In the United States, proposals including the Filter Bubble Transparency Act and the Kids Online Safety Act (KOSA) have used it to frame requirements around recommendation system transparency. In the United Kingdom, the House of Commons Science, Innovation and Technology Committee used the term in a 2025 report on how recommendation algorithms contributed to the spread of misinformation during the 2024 Southport riots. A Joint Declaration on AI and Freedom of Expression adopted in October 2025 by four international freedom of expression mandate holders, including the UN Special Rapporteur on Freedom of Opinion and Expression and the OSCE Representative on Freedom of the Media, stated that recommender systems and other AI-powered curation tools exert "a large hidden influence and gatekeeper role" over what information people access and consume. == Background == Early internet platforms typically displayed content in reverse-chronological order or through keyword-based search systems. Although the term is most often applied to social media, the underlying logic predates social media itself. A 2021 overview traced the origins of modern recommendation systems to the early 1990s, when they were first used experimentally for personal email and information filtering. The 1992 Tapestry mail system and the 1994 GroupLens news filtering system were early milestones before recommendation systems spread into e-commerce and other online services. As user bases and content volumes grew during the 2000s, major platforms including Google, YouTube, and Facebook developed machine-learning systems to personalise content delivery and prioritise material predicted to generate engagement. Facebook introduced its News Feed in 2006, which gradually shifted from chronological presentation towards algorithmically ranked content. YouTube altered its recommendation system in 2012 to prioritise watch time rather than clicks, a change the platform said was prompted by concerns that click-based metrics encouraged misleading thumbnails and low-quality videos. TikTok, launched internationally in 2018, adopted a model in which its primary content surface, the For You feed, is driven almost entirely by algorithmic recommendation rather than by a user's social graph. An internal document obtained by The New York Times in 2021 showed that the platform's algorithm optimised for retention and time spent, using signals such as watch duration, replays, likes, and comments to score and rank videos. Algorithmic recommendation also became central to platforms outside social media. Spotify's personalised features, including Discover Weekly, Release Radar, and Home recommendations, use behavioural signals and inferred "taste profiles" to surface tracks and artists beyond a listener's existing library. An ethnographic study of music curators at streaming platforms described this blend of algorithmic and human editorial selection as an "algo-torial" model of gatekeeping. Amazon adopted item-based collaborative filtering for product recommendations in 1998, and its recommendation engine has been described as one of the earliest large-scale deployments of recommendation technology in e-commerce. The same dynamics operate on adult content platforms. Law professor Amy Adler has argued that from 2007 onwards the pornography industry migrated to algorithm-driven streaming platforms, most of which are controlled by a single near-monopoly company, Aylo (formerly MindGeek). These platforms use algorithmic search engines, suggestions, rigid categorisation of content, and AI-driven search term optimisation in ways that produce the same distorting effects found on mainstream speech platforms, including filter bubbles, feedback loops, and the tendency of algorithmic recommendations to alter individual preferences. == Mechanisms == Recommendation systems commonly combine collaborative filtering, which predicts a user's preferences from the behaviour of similar users, with machine-learning models that predict which content a user is likely to engage with from their prior activity. In a common two-stage design, a platform first generates a set of candidate items from a large content pool and then ranks them using a scoring model with objectives such as predicted engagement or user satisfaction. Small changes in ranking criteria can shift exposure at scale, particularly when applied repeatedly across multiple browsing sessions. These systems typically rely on signals including engagement rates, viewing duration, click-through rates, and network relationships between users. Modern recommendation pipelines continuously update predictions as new behavioural data arrives, allowing platforms to adjust rankings in near real time. Users' revealed preferences, expressed through behaviour such as clicks and viewing time, do not always align with their stated preferences, expressed through explicit feedback such as surveys or content controls. Popularity signals can create feedback dynamics in which early engagement increases the likelihood that content will be shown to additional users. Experimental research on online cultural markets has demonstrated how such feedback processes can produce unequal visibility outcomes even when initial differences in content quality are small. == Beneficial and public-interest uses == Recommendation systems can help users navigate large volumes of content by surfacing material predicted to match their interests or needs, which can improve discoverability on platforms with large content libraries. In public health communication, platforms can help health authorities distribute timely information at scale, though the same recommendation systems also risk amplifying misinformation alongside official guidance. Sociologist Zeynep Tufekci has argued that the shift from independent blogs to large centralised platforms transferred gatekeeping power from traditional media to corporate algorithms. In the case of the Egyptian uprising of 2011, she noted that ordinary users

  Read more →
• 

  Swap chain

  In computer graphics, a swap chain (also swapchain) is a series of virtual framebuffers used by the graphics card and graphics API for frame rate stabilization, stutter reduction, and several other purposes. Because of these benefits, many graphics APIs require the use of a swap chain. The swap chain usually exists in graphics memory, but it can exist in system memory as well. A swap chain with two buffers is a kind of double buffer. == Function == In every swap chain there are at least two buffers. The first framebuffer, the screenbuffer, is the buffer that is rendered to the output of the video card. The remaining buffers are known as backbuffers. Each time a new frame is displayed, the first backbuffer in the swap chain takes the place of the screenbuffer, this is called presentation or swapping. A variety of other actions may be taken on the previous screenbuffer and other backbuffers (if they exist). The screenbuffer may be simply overwritten or returned to the back of the swap chain for further processing. The action taken is decided by the client application and is API dependent. == Direct3D == Microsoft Direct3D implements a SwapChain class. Each host device has at least one swap chain assigned to it, and others may be created by the client application. The API provides three methods of swapping: copy, discard, and flip. When the SwapChain is set to flip, the screenbuffer is copied onto the last backbuffer, then all the existing backbuffers are copied forward in the chain. When copy is set, each backbuffer is copied forward, but the screenbuffer is not wrapped to the last buffer, leaving it unchanged. Flip does not work when there is only one backbuffer, as the screenbuffer is copied over the only backbuffer before it can be presented. In discard mode, the driver selects the best method. == Comparison with triple buffering == Outside the context of Direct3D, triple buffering refers to the technique of allowing an application to draw to whichever back buffer was least recently updated. This allows the application to always proceed with rendering, regardless of the pace at which frames are being drawn by the application or the pace at which frames are being sent to the display. Triple buffering may result in a frame being discarded without being displayed if two or more newer frames are completely rendered in the time it takes for one frame to be sent to the display. By contrast, Direct3D swap chains are a strict first-in, first-out queue, so every frame that is drawn by the application will be displayed even if newer frames are available. Direct3D does not implement a most-recent buffer swapping strategy, and Microsoft's documentation calls a Direct3D swap chain of three buffers "triple buffering". Triple buffering as described above is superior for interactive purposes such as gaming, but Direct3D swap chains of more than three buffers can be better for tasks such as presenting frames of a video where the time taken to decode each frame may be highly variable.

  Read more →
• 

  Power cycling

  Power cycling is the act of turning a piece of equipment, usually a computer, off and then on again. Reasons for power cycling include having an electronic device reinitialize its set of configuration parameters or recover from an unresponsive state of its mission critical functionality, such as in a crash or hang situation. Power cycling can also be used to reset network activity inside a modem. It can also be among the first steps for troubleshooting an issue. == Overview == Power cycling can be done manually, usually using the power switch on the device, or remotely, through some type of external device connected to the power input. In the data center environment, remote control power cycling can usually be done through a power distribution unit, over the network. In the home environment, this can be done through home automation powerline communications. Most Internet service providers publish a "how-to" on their website showing their customers the correct procedure to power cycle their devices. Power cycling is a common diagnostic procedure usually performed first when a computer system freezes. However, frequently power cycling a computer can cause thermal stress. Reset has an equal effect on the software but may be less problematic for the hardware as power is not interrupted. == Historical uses == On all Apollo missions to the moon, the landing radar was required to acquire the surface before a landing could be attempted. But on Apollo 14, the landing radar was unable to lock on. Mission control told the astronauts to cycle the power. They did, the radar locked on just in time, and the landing was completed. During the Rosetta mission to comet 67P/Churyumov–Gerasimenko, the Philae lander did not return the expected telemetry on awakening after arrival at the comet. The problem was diagnosed as "somehow a glitch in the electronics", engineers cycled the power, and the lander awoke correctly. During the launch of the billion dollar AEHF-6 satellite on 26 March 2020 by an Atlas V rocket from Cape Canaveral Space Force Station in Florida, a hold was called at T-46 seconds due to hydraulic system not responding as expected. The launch crew turned it off and back on, and the launch proceeded normally. In 2023 the Interstellar Boundary Explorer spacecraft stopped responding to commands after an anomaly. When gentler techniques failed, NASA resorted to rebooting the spacecraft with the remote equivalent of a power cycle.

  Read more →
• 

  HTTP compression

  HTTP compression is a capability that can be built into web servers and web clients to improve transfer speed and bandwidth utilization. HTTP data is compressed before it is sent from the server: compliant browsers will announce what methods are supported to the server before downloading the correct format; browsers that do not support compliant compression method will download uncompressed data. The most common compression schemes include gzip and Brotli; a full list of available schemes is maintained by the IANA. There are two different ways compression can be done in HTTP. At a lower level, a Transfer-Encoding header field may indicate the payload of an HTTP message is compressed. At a higher level, a Content-Encoding header field may indicate that a resource being transferred, cached, or otherwise referenced is compressed. Compression using Content-Encoding is more widely supported than Transfer-Encoding, and some browsers do not advertise support for Transfer-Encoding compression to avoid triggering bugs in servers. == Compression scheme negotiation == The negotiation is done in two steps, described in RFC 2616 and RFC 9110: 1. The web client advertises which compression schemes it supports by including a list of tokens in the HTTP request. For Content-Encoding, the list is in a field called Accept-Encoding; for Transfer-Encoding, the field is called TE. 2. If the server supports one or more compression schemes, the outgoing data may be compressed by one or more methods supported by both parties. If this is the case, the server will add a Content-Encoding or Transfer-Encoding field in the HTTP response with the used schemes, separated by commas. The web server is by no means obligated to use any compression method – this depends on the internal settings of the web server and also may depend on the internal architecture of the website in question. == Content-Encoding tokens == The official list of tokens available to servers and client is maintained by IANA, and it includes: br – Brotli, a compression algorithm specifically designed for HTTP content encoding, defined in RFC 7932 and implemented in all modern major browsers. compress – UNIX "compress" program method (historic; deprecated in most applications and replaced by gzip or deflate) deflate – compression based on the deflate algorithm (described in RFC 1951), a combination of the LZ77 algorithm and Huffman coding, wrapped inside the zlib data format (RFC 1950); exi – W3C Efficient XML Interchange gzip – GNU zip format (described in RFC 1952). Uses the deflate algorithm for compression, but the data format and the checksum algorithm differ from the "deflate" content-encoding. This method is the most broadly supported as of March 2011. identity – No transformation is used. This is the default value for content coding. pack200-gzip – Network Transfer Format for Java Archives zstd – Zstandard compression, defined in RFC 8478 In addition to these, a number of unofficial or non-standardized tokens are used in the wild by either servers or clients: bzip2 – compression based on the free bzip2 format, supported by lighttpd lzip – compression based on the free lzip format, supported by wget and Links lzma – compression based on (raw) LZMA is available in Opera 20, and in elinks via a compile-time option peerdist – Microsoft Peer Content Caching and Retrieval rsync – delta encoding in HTTP, implemented by a pair of rproxy proxies. xpress – Microsoft compression protocol used by Windows 8 and later for Windows Store application updates. LZ77-based compression optionally using a Huffman encoding. xz – LZMA2-based content compression, supported by a non-official Firefox patch; and fully implemented in mget since 2013-12-31. == Servers that support HTTP compression == SAP NetWeaver Microsoft IIS: built-in or using third-party module Apache HTTP Server, via mod_deflate (despite its name, only supporting gzip), and mod_brotli Hiawatha HTTP server: serves pre-compressed files Cherokee HTTP server, On the fly gzip and deflate compressions Oracle iPlanet Web Server Zeus Web Server lighttpd nginx – built-in Applications based on Tornado, if "compress_response" is set to True in the application settings (for versions prior to 4.0, set "gzip" to True) Jetty Server – built-into default static content serving and available via servlet filter configurations GeoServer Apache Tomcat IBM Websphere AOLserver Ruby Rack, via the Rack::Deflater middleware HAProxy Varnish – built-in. Works also with ESI Armeria – Serving pre-compressed files NaviServer – built-in, dynamic and static compression Caddy – built-in via encode Many content delivery networks also implement HTTP compression to improve speedy delivery of resources to end users. The compression in HTTP can also be achieved by using the functionality of server-side scripting languages like PHP, or programming languages like Java. Various online tools exist to verify a working implementation of HTTP compression. These online tools usually request multiple variants of a URL, each with different request headers (with varying Accept-Encoding content). HTTP compression is considered to be implemented correctly when the server returns a document in a compressed format. By comparing the sizes of the returned documents, the effective compression ratio can be calculated (even between different compression algorithms). == Problems preventing the use of HTTP compression == A 2009 article by Google engineers Arvind Jain and Jason Glasgow states that more than 99 person-years are wasted daily due to increase in page load time when users do not receive compressed content. This occurs when anti-virus software interferes with connections to force them to be uncompressed, where proxies are used (with overcautious web browsers), where servers are misconfigured, and where browser bugs stop compression being used. Internet Explorer 6, which drops to HTTP 1.0 (without features like compression or pipelining) when behind a proxy – a common configuration in corporate environments – was the mainstream browser most prone to failing back to uncompressed HTTP. Another problem found while deploying HTTP compression on large scale is due to the deflate encoding definition: while HTTP 1.1 defines the deflate encoding as data compressed with deflate (RFC 1951) inside a zlib formatted stream (RFC 1950), Microsoft server and client products historically implemented it as a "raw" deflated stream, making its deployment unreliable. For this reason, some software, including the Apache HTTP Server, only implements gzip encoding. == Security implications == Compression allows a form of chosen plaintext attack to be performed: if an attacker can inject any chosen content into the page, they can know whether the page contains their given content by observing the size increase of the encrypted stream. If the increase is smaller than expected for random injections, it means that the compressor has found a repeat in the text, i.e. the injected content overlaps the secret information. This is the idea behind CRIME. In 2012, a general attack against the use of data compression, called CRIME, was announced. While the CRIME attack could work effectively against a large number of protocols, including but not limited to TLS, and application-layer protocols such as SPDY or HTTP, only exploits against TLS and SPDY were demonstrated and largely mitigated in browsers and servers. The CRIME exploit against HTTP compression has not been mitigated at all, even though the authors of CRIME have warned that this vulnerability might be even more widespread than SPDY and TLS compression combined. In 2013, a new instance of the CRIME attack against HTTP compression, dubbed BREACH, was published. A BREACH attack can extract login tokens, email addresses or other sensitive information from TLS encrypted web traffic in as little as 30 seconds (depending on the number of bytes to be extracted), provided the attacker tricks the victim into visiting a malicious web link. All versions of TLS and SSL are at risk from BREACH regardless of the encryption algorithm or cipher used. Unlike previous instances of CRIME, which can be successfully defended against by turning off TLS compression or SPDY header compression, BREACH exploits HTTP compression which cannot realistically be turned off, as virtually all web servers rely upon it to improve data transmission speeds for users. As of 2016, the TIME attack and the HEIST attack are now public knowledge.

  Read more →
• 

  Giditraffic

  GidiTraffic (or GIDITRAFFIC) is an online social service started on 23 September 2011. Based primarily on social media, the service employs crowdsourcing as its primary means of providing real-time traffic updates to subscribers on its platform. The service, delivered free of charge, affords its users access to various types of information. Though its broadest category of users is road users and motorists, GIDITRAFFIC lends itself as a platform for answering inquiries from anyone who requires information on any subject of interest. GIDITRAFFIC's core competence is in vehicular traffic reports, however, the service also handles all other forms of traffic (going by the fact that the word traffic also means "the mutual exchange of information"). == Operation == Users of the service log on to its Twitter feed to get up-to-date traffic information or to post a general inquiry, which GIDITRAFFIC then publishes to all subscribers. Through crowdsourced replies, a requester receives numerous responses from other subscribers who have seen the question and can provide a relevant answer. In addition, updates are provided by subscribers to the platform via their mobile devices, thereby making the service effective in delivering traffic updates as they occur, and providing timely answers to other user inquiries. This informs GIDITRAFFIC's motto of "Lending each other an eye", alluding to the collaboration and cooperation between the platform's users in making the service indispensable to its users. == Reception == On Twitter, which is its primary platform, the service caters to over 1,800,000 subscribers, with the number increasing daily. The popularity of the platform stems from the fact that it not only keeps its subscribers abreast of the traffic situation in Lagos, the commercial capital city of Nigeria (well known for its many traffic jams), but users in other parts of the world. For a regular user of the platform, knowing where to avoid getting to a set destination in good time is well worth the two or three minutes it takes to access and scroll through the GIDITRAFFIC feed for updates. Another interesting aspect of this platform is the identity of the person behind it. The sustained anonymity of this individual has sparked many discussions centering on his or her possible identity. Online, GIDITRAFFIC continuously publishes traffic updates and user questions, while keeping up witty interactions with the platform's followers round the clock – adding to the mystery and persona of the GIDITRAFFIC owner. == Awards and recognition == In early 2012, GIDITRAFFIC received a nomination for a Shorty Award in the Life-Saving Hero category. Although this did not translate into a win, it brought recognition and wider exposure for the service from international news outlets such as the BBC, Washington Post. and New York Times. Back home in Nigeria, also in 2012, GIDITRAFFIC was honored with a Future Award for Best Use of New Media in recognition of the huge impact the service has had in terms of helping Lagos residents better manage time spent in traffic. == Mobile Applications == In 2012, GIDITRAFFIC partnered with telecommunications company Nokia to produce a downloadable mobile traffic application (the GIDITRAFFIC application, available for Nokia Asha phones on Nokia's online store). There are plans to extend the application to a wider range of mobile phone platforms. On 4 September 2013, the GIDITRAFFIC application for Nokia Lumia phones using Windows Phone 8 was launched on the Windows App Store.

  Read more →
• 

  Knowledge assessment methodology

  The knowledge assessment methodology (KAM) is "an interactive benchmarking tool created by the World Bank's Knowledge for Development Program to help countries identify the challenges and opportunities they face in making the transition to the knowledge-based economy." KAM does so by providing information on knowledge economy indicators for 146 countries. Its products include the Knowledge Economy Index and the Knowledge Index.

  Read more →
• 

  Online exhibition

  An online exhibition, also referred to as a virtual exhibition, online gallery, cyber-exhibition, is an exhibition whose venue is cyberspace. Museums and other organizations create online exhibitions for many reasons. For example, an online exhibition may: expand on material presented at, or generate interest in, or create a durable online record of, a physical exhibition; save production costs (insurance, shipping, installation); solve conservation/preservation problems (e.g., handling of fragile or rare objects); reach lots more people: "Access to information is no longer restricted to those who can afford travel and museum visits, but is available to anyone who has access to a computer with an Internet connection. Unlike physical exhibitions, online exhibitions are not restricted by time; they are not forced to open and close but may be available 24 hours a day. In the nonprofit world, many museums, libraries, archives, universities, and other cultural organizations create online exhibitions. A database of such exhibitions is Library and Archival Exhibitions on the Web. Online exhibition organizers may use techniques such as marquee text, display advertisements, and in-event emails to engage patrons. Various guides have been published to help organizations create effective online exhibitions. The earliest museum with a physical existence to create a programme of substantial online exhibitions with high resolution images of artefacts was the Museum of the History of Science in Oxford, the first of which, The Measurers: a Flemish Image of Mathematics in the Sixteenth Century and an exhibition of early photographs, were published on 21 August 1995. == Examples of online exhibitions == International Museum of Women is an online-only museum that does not have a physical building and instead offers online exhibitions about women's issues globally as well as an online community. Online exhibitions include "Imagining Ourselves" (launched 2006) about women's identity, "Women, Power and Politics" (2008), and "Economica: Women and the Global Economy" (2009). Tucson LGBTQ Museum is an online-only museum that does not have a physical building and instead offers online exhibitions about LGBTQ history. The online photographic, audio, video, text, and other historical exhibitions include exhibits from the 1700s to the present day. The effort began in the summer of 1967 and spanned almost 50 years. International New Media Gallery (INMG) is an online museum specialising in moving image and screen-based art. The INMG is dedicated to exploring current debates and topics in art history: touching on areas such as migration, war, environmental activism and the internet itself. The gallery publishes extensive academic catalogues alongside its exhibitions. It also hosts spaces for discussion and debate, both online and offline. Virtual Museum of Modern Nigerian Art – the VMMNA is the first of its kind in Africa. Hosted by the Pan-African University, Lagos, Nigeria this virtual museum offers a good view of the development on Nigerian Art in the past fifty years.

  Read more →
• 

  Affordable affluence

  Affordable affluence refers to a cultural phenomenon where consumers use accessible luxury goods and lifestyles to project status and align themselves with a higher social class, without requiring substantial wealth. This concept is embodied by brands such as Aritzia and Erewhon, which position themselves as offering high-end, trendy, or health-conscious products that are relatively accessible to the average consumer. A related concept is quiet luxury, where the ultra-wealthy signal wealth through subtle means. Quiet luxury emphasizes the widening gap between the ultra-wealthy and the general public, whereas accessible affluence provides a way for the general public to indulge in the lifestyle of the ultra-wealthy. == Origin of the term == An early use of the phrase in this context in a 2023 article in The Cut called "Meet the People Working 3 Jobs to Afford Erewhon." One of the interviewees used Erewhon as an archetype of affordable affluence. It was described as “a way for regular people to position themselves adjacent to the upper class.” == Background and description == The phenomenon arises due to an individual's desire to showcase status. For years, companies have strategized how to target the average consumers by providing a product that signals an elevated social status. For instance, Aritzia partnered with celebrities and micro-influencers to make it an aspirational brand at an affordable cost. Erewhon similarly has allowed middle class consumers to subtly signal a higher degree of perceived wealth by purchasing higher priced, but still attainable items. It has allowed middle-class individuals to feel as though they are part of an exclusive culture. This phenomenon has been seen particularly with Gen Z and Millennials in the setting of financial hardships in the 2020s. Affordable affluence is an example of the lipstick effect. Because traditional status symbols such as expensive cars became relatively more unattainable, posting clips on social media that showcase affordable affluence become an alternative status symbol. Particularly with food, the perception has evolved from a necessity to a luxury. A McKinsey & Company report demonstrated that these generations place a higher importance on groceries than restaurants, travel, and beauty/fashion.

  Read more →
• 

  Social media age verification laws in the United States

  In the United States, age verification laws for social media are ostensibly designed to limit young people's access to content deemed problematic such as pornography and to reduce the negative impact of social media on the mental health and well-being of children and adolescents. The purpose and effects of such laws are highly contested. Critics say that these laws suppress free speech by removing online anonymity. They have also stated the laws undermine safety, even for children, by increasing the exposure of user data to breaches, many sites require government IDs and biometric data (such as photographs), often transmitted or secured insecurely and without encryption. They also note that the measures are easily circumvented with VPNs, prompting some states such as Michigan and Wisconsin to propose legislation banning VPNs. == Laws == Many state legislatures have considered or enacted legislation pertaining to young people and social media. In 2022, California passed the California Age-Appropriate Design Code Act (AB 2273) requiring websites that are likely to be used by minors to estimate visitors' ages. On March 23, 2023, Utah Governor Spencer Cox signed SB 152 and HB 311, collectively known as the Utah Social Media Regulation Act, which requires age verification; if a user is under 18, they have to get parental consent before making an account on any social media platform. Few laws have gone into effect partially due to court challenges. === Arkansas === On April 11, 2023, Arkansas enacted SB 396, the Social Media Safety Act. The law requires certain social media companies that make over $100 million per year to verify the age of new users using a third party, and to obtain parental consent for users under 18. It excludes social media companies that allow a user to generate short video clips as well as games. The law was set to go in effect in September 2023. On June 29, 2023, NetChoice sued the Attorney General of Arkansas Tim Griffin in The Western District Court of Arkansas to block enforcement of the law, supported by the American Civil Liberties Union and the Electronic Frontier Foundation (EFF). On July 7, 2023, NetChoice filed a motion for a preliminary injunction to block enforcement of the law. On July 27, Griffin and Tony Allen filed briefs in opposition to the preliminary injunction. The preliminary injunction was granted by Judge Timothy L. Brooks on August 31, reasoning that the law was too vague, that NetChoice's members will suffer irreparable harm if the act goes into effect, and that age restrictions were ineffective. === California === ==== Digital Age Assurance Act (AB 1043) ==== On October 13, 2025, Gavin Newsom signed the Digital Age Assurance Act into law, which requires operating system providers to estimate the age of a user and into 4 age categories: Under 13 13 - 15 16 - 17 18 and over It comes into force on January 1, 2027. ==== California Age-Appropriate Design Code (AB 2273) ==== On September 15, 2022, California enacted AB 2273, the California Age-Appropriate Design Code Act. Its most controversial provisions required online services that are likely to be used by those under 18 to estimate the age of child users with a "reasonable level of certainty". It also required these services to file Data Protection Impact Assessments (DPIAs) certifying whether an online product, service, or feature could harm children, including by exposing them to (potentially) harmful content. The law does not define harmful content. Before the law took effect, EFF sent a veto request to Newsom. On December 14, 2022, NetChoice sued. On September 18, 2023, Federal Judge Beth Labson Freeman granted a preliminary injunction. The 9th Circuit on August 16, 2024, affirmed the injunction against the DPIA section of the law and sent the rest back, because the argument in the 9th circuit was mainly focused on the DPIA. ==== Protecting Our Kids from Social Media Addiction Act (SB 976) ==== On September 20, 2024, California enacted SB 976, Protecting Our Kids from Social Media Addiction. The law requires online platforms to exclude those under 18 from "addictive" feeds unless parental consent is given. It requires online platforms to not send notifications to someone under 18 between 12:00 AM and 6:00 AM without parental consent or between 8:00 am – 3:00 pm without parental consent from September through May (the law does not define what a "notification" is). The law took effect on January 1, 2025, with age verification required as of December 31, 2026. On November 12, NetChoice sued in the Northern District and before Judge Edward John Davila. On December 31, the judge blocked the sections of SB 976 that required time-of-day restrictions. He also enjoined requirements to report on the number of minor users as well as the number of parental assents to access an addictive feed. He did not block the age assurance requirement or blocking minors from seeing addictive feeds without parental consent. His reasoning was that age assurance that runs in the background does not restrict adult access to speech and that regulating feeds does not violate the first amendment because it was content neutral and did not remove any content. On January 1, 2025, NetChoice filed a motion to fully block the law as part of its appeal to the Ninth Circuit. NetChoice claimed that the court erred in its reading of Supreme Court case Moody v. NetChoice by mainly focusing on the concurring opinions and not the deciding opinion. The same day Davila decreed that California's response to NetChoice was due by 11:59 pm. California responded the same day to NetChoice's motion, claiming that the court should not block the full law, claiming that NetChoice had misread Moody v. NetChoice and that NetChoice's members would not likely face any harm from the act because members such as X (formerly Twitter) already offer their members feeds that were not personalized. On January 2, Davila granted NetChoice's motion to block the full law during the appeals process by delaying the effective date of the law from January 1, 2025, to February 1, 2025. That day NetChoice appealed the case to the Ninth Circuit Court of Appeals. === Florida === On January 5, 2024, Tyler Sirois introduced HB 1, which would ban anyone under 16 from using any social media platform and would require platforms to verify the age of users. After the bill passed, the American Civil Liberties Union (ACLU) published a blog post opposing the bill for violating the rights of minors and adults. The bill was vetoed by Governor Ron DeSantis on March 1, 2024, claiming that the State Legislature was going to enact a better alternative. HB 3 then decreased the minimum age from 16 to 14, allowing minors aged 14 and 15 to make social media accounts with parental consent. Florida enacted it on March 25, 2024, and took effect on January 1, 2025. A surge of 1,150% in VPN demand in Florida was detected after the law took effect. VPN services provide the ability to circumvent the law. On October 28, 2024, NetChoice and Computer and Communications Industry Association sued. The Judge is Chief Judge Mark E. Walker. On February 28, 2025, arguments were heard on the motion for a preliminary injunction. Walker seemed skeptical of Florida's argument that the law did not violate the first amendment and said the State would have a hard time to justify a complete ban of youth under 14 from social media. On March 13, Walker denied the motion for a preliminary injunction because the plaintiffs had not proven that at least one of their members had at least 10 percent of their users under 16 use their platform for at least 2 hours per day. Plaintiffs filed an amended complaint and a renewed motion for a preliminary injunction which was granted on June 3, for failing First Amendment Intermediate scrutiny. The injunction left in force the provision that allowed parents to request termination of their child's social media account. === Georgia === On April 23, 2024, Georgia enacted SB 351, which became Act 463. Act 463 requires platforms to verify the age of users of social media platforms and require users under 16 years of age to have parental consent before creating an account. It also requires schools to ban all social media platforms, including YouTube. Before the law was signed NetChoice sent a veto request to Kemp claiming the law was unconstitutional and was bad policy. After the bill was enacted, ACLU and NetChoice criticized the bill. NetChoice sued two months before the law's effective date. The Judge is Amy Totenberg. the suit claims that the law violates the First Amendment and Fourteenth Amendments. === Louisiana === ==== Secure Online Child Interaction and Age Limitation Act (SB 162) ==== On June 28, 2023, Louisiana enacted SB 162, the Secure Online Child Interaction and Age Limitation Act. It requires social media platforms to verify user age and get parental consent for users under 16, prohibits account holders under 1

  Read more →
• 

  Line Drawing System-1

  LDS-1 (Line Drawing System-1) was a calligraphic (vector, rather than raster) display processor and display device created by Evans & Sutherland in 1969. This model was known as the first graphics device with a graphics processing unit. == Features == It was controlled by a variety of host computers. Straight lines were smoothly rendered in real-time animation. General principles of operation were similar to the systems used today: 4x4 transformation matrices, 1x4 vertices. Possible uses included flight simulation (in the product brochure there are screenshots of landing on a carrier), scientific imaging and GIS systems. == History == The first LDS-1 was shipped to the customer (BBN) in August 1969. Only a few of these systems were ever built. One was used by the Los Angeles Times as their first typesetting/layout computer. One went to NASA Ames Research Center for Human Factors Research. Another was bought by the Port Authority of New York to develop a tugboat pilot trainer for navigation in the harbor. The MIT Dynamic Modeling had one, and there was a program for viewing an ongoing game of Maze War.

  Read more →
• 

  Downloadable content

  Downloadable content (DLC) is additional content created for an already released video game, distributed through the Internet by the game's publisher. It can be added for no extra cost or as a form of video game monetization, enabling the publisher to gain additional revenue from a title after it has been purchased, often using a microtransaction system. DLC can range from cosmetic content, such as skins, to new in-game content, like characters, levels, modes, and larger expansions that may contain a mix of such content as a continuation of the base game. In some games, multiple DLCs (including future DLC not yet released) may be bundled as part of a "season pass"—typically at a discount rather than purchasing each DLC individually. While the Dreamcast was the first home console to support DLC (albeit in a limited form due to hardware and internet connection limitations), Microsoft's Xbox helped popularize the concept. Since the seventh generation of video game consoles, DLC has been a prevalent feature of major video game platforms with internet connectivity. == Etymology == Since the popularization of microtransactions in online distribution platforms such as Steam, the term DLC has become a synonymous for any form of paid content in video games, regardless of whether they constitute the download of new content. Furthermore, this led to the creation of the oxymoronic term "on-disc DLC" for content included on the game's original files but locked behind a paywall. == History == === Precursors to DLC === The earliest form of downloadable content were offerings of full games, such as on the Atari 2600's GameLine service, which allowed users to download games using a telephone line. A similar service, Sega Channel, allowed for the downloading of games to the Sega Genesis over a cable line. While the GameLine and Sega Channel services allowed for the distribution of entire titles, they did not provide downloadable content for existing titles. Expansion packs were sold at retail for some PC games, which featured content such as additional levels, characters, or maps for a base game. They often required an installation of the original game in order to function, but some games (such as Half-Life) had "standalone" expansions, which were essentially spin-off games that reused engine code and assets from the original game. === On consoles === The Dreamcast was the first console to feature online support as a standard; DLC was available, though limited in size due to the narrowband connection and the 200 block limit of the Visual Memory Unit memory card. These online features were still considered a breakthrough in video games. With the release of the Xbox, Microsoft was the second company to implement downloadable content. Many Xbox titles, including Splinter Cell, Halo 2, and Ninja Gaiden, offered varying amounts of extra content, available for download through the Xbox Live service. Most of this content was available free. With the advent of the GameCube, Nintendo was the third company to implement downloadable content. Many GameCube titles offered varying amounts of extra content from Game Boy Advance titles with the GameCube – Game Boy Advance link cable. All of this content was available free. The Xbox 360 (2005) included more robust support for digital distribution, including DLC downloads and purchases, via its Xbox Live Marketplace service. Microsoft believed that publishers would benefit by offering small pieces of content at a small cost ($1 to $5), rather than full expansion packs (~$20), as this would allow players to pick and chose what content they desired, providing revenue to the publishers. Microsoft also utilized a digital currency known as "Microsoft Points" for transactions, which could also be purchased through physical gift cards to avoid the banking fees associated with the small price points. The PlayStation 3 (2006) adopted the same approach with their downloadable hub, the PlayStation Store. Sony planned on having the bulk of its content be purchased separately via many separate online microtransactions for PlayStation Network titles, including Gran Turismo HD Concept and Gran Turismo 5 Prologue. The Wii (2006) featured a sparser amount of downloadable content on their Wii Shop Channel, the bulk of which is accounted for by digital distribution of emulated Nintendo titles from previous generations. Music video games, such as titles from the Guitar Hero and Rock Band franchises, took significant advantage of downloadable content as a means of offering new songs to be played in-game. Harmonix claimed that Guitar Hero II would feature "more online content than anyone has ever seen in a game to this date." Rock Band features the largest number of downloadable items of any console video game, with a steady number of new songs that were added weekly between 2007 and 2013. Acquiring all the downloadable content for Rock Band would, as of July 12, 2012, cost $5,880.10. === On personal computers === As the popularity and speed of internet connections rose, so did the popularity of using the internet for digital distribution of media. User-created game mods and maps were distributed exclusively online, as they were mainly created by people without the infrastructure capable of distributing the content through physical media. In 1997, Cavedog offered a new unit every month as free downloadable content for their real-time strategy computer game Total Annihilation. Later PC digital distribution platforms, such as Games for Windows Marketplace and Steam, would add support for DLC in a similar manner to consoles. === On handhelds === Nokia phones of the late 1990s and early 2000s shipped with side-scrolling shooter Space Impact, available on various models. With the introduction of WAP in 2000, additional downloadable content for the game, with extra levels, became available. The Nintendo Wi-Fi Connection service on the Nintendo DS could be used to obtain a form of DLC for certain games, such as Picross DS—where players could download puzzle "packs" of classic puzzles from previous Picross series games (such as Mario's Picross). as well as downloadable user generated content. Due to the Nintendo DS's use of cartridges and lack of dedicated storage, most "DLC" for DS games was limited in scope, or in some cases (such as Professor Layton and the Curious Village and Moero! Nekketsu Rhythm Damashii Osu! Tatakae! Ouendan 2), was already part of the game's data on the cartridge, and merely unlocked. Its successor, the Nintendo 3DS, natively supported the purchase of DLC for supported titles via Nintendo eShop. Starting with iPhone OS 3, downloadable content became available for the platform via applications bought from the App Store. While this ability was initially only available to developers for paid applications, Apple eventually allowed for developers to offer this in free applications as well in October 2009. == On-disc DLC == In some cases, a purchased DLC may not actually download new content to the device, but merely consists of data used to enable associated content that is already present within the game's data. DLC of this nature revealed via data mining is typically referred to as "on-disc DLC" or PULC (premium unlockable content). This practice has sometimes been considered controversial, with publishers being accused of using what is effectively a microtransaction to lock access to content that was already contained within the game as sold at retail. Data relating to future DLC may be included on-disc or downloaded during updates for technical reasons as well, either to ensure online multiplayer compatibility for existing content between players who have not yet purchased the new DLC, or as dormant support code for planned content that is still in development at the time of the release. == Monetization == Downloadable content is often offered for a price. Since Facebook games popularized the business model of microtransactions, some have criticized downloadable content as being overpriced and an incentive for developers to leave items out of the initial release, with The Elder Scrolls IV: Oblivion's horse armor DLC having faced a mixed reception upon its release for that reason. However, by 2009, the Horse Armor DLC was one of the top ten content packs that Bethesda had sold, which justified the DLC model for future games. Where a normal software disc may allow its license sold or traded, DLC is generally locked to a specific user's account and does not come with the ability to transfer that license to another user. In addition to individual content downloads, video game publishers sometimes offer a "season pass", which allows users to pre-order a selection of upcoming content over a specific time period, and ensuring the customer's ability to immediately obtain the content upon release. As users do not have the ability to fully preview the content before their purchase, there is a chance that the content of a season

  Read more →
• 

  New media

  New media are communication technologies that enable or enhance interaction between users, as well as interaction between users and content. In the middle of the 1990s, the phrase "new media" became widely used as part of a sales pitch for the influx of interactive CD-ROMs for entertainment and education. The new media technologies, sometimes known as Web 2.0, include a wide range of web-related communication tools such as blogs, wikis, online social networking, virtual worlds, and other social media platforms. The phrase "new media" refers to computational media that share material online and through computers. New media inspire new ways of thinking about older media. Media do not replace one another in a clear, linear succession, instead evolving in a more complicated network of interconnected feedback loops . What is different about new media is how they specifically refashion traditional media and how older media refashion themselves to meet the challenges of new media. Unless they contain technologies that enable digital generative or interactive processes, broadcast television programs, non-interactive news websites, feature films, magazines, and books are not considered to be new media. The term "new media" stands in contrast to old media, which dominated the media landscape as a form of mass media for many years. == History == In the 1950s, connections between computing and radical art began to grow stronger. It was not until the 1980s that Alan Kay and his co-workers at Xerox PARC began to give the computability of a personal computer to the individual, rather than have a big organization be in charge of this. In the late 1980s and early 1990s, however, we seem to witness a different kind of parallel relationship between social changes and computer design. Although causally unrelated, conceptually, it makes sense that the Cold War and the design of the Web took place at exactly the same time. Writers and philosophers such as Marshall McLuhan were instrumental in the development of media theory during this period which is now famous declaration in Understanding Media: The Extensions of Man, that "the medium is the message" drew attention to the too often ignored influence media and technology themselves, rather than their "content," have on humans' experience of the world and on society broadly. Until the 1980s, media relied primarily upon print and analog broadcast models such as television and radio. The last twenty-five years have seen the rapid transformation into media which are predicated upon the use of digital technologies such as the Internet and video games. However, these examples are only a small representation of new media. The use of digital computers has transformed the remaining 'old' media, as suggested by the advent of digital television and online publications. Even traditional media forms such as the printing press have been transformed through the application of technologies by using of image manipulation software like Adobe Photoshop and desktop publishing tools. Andrew L. Shapiro argues that the "emergence of new, digital technologies signals a potentially radical shift of who is in control of information, experience and resources". W. Russell Neuman suggests that whilst the "new media" have technical capabilities to pull in one direction, economic and social forces pull back in the opposite direction. According to Neuman, "We are witnessing the evolution of a universal interconnected network of audio, video, and electronic text communications that will blur the distinction between interpersonal and mass communication; and between public and private communication". Neuman argues that new media will: Alter the meaning of geographic distance. Allow for a huge increase in the volume of communication. Provide the possibility of increasing the speed of communication. Provide opportunities for interactive communication. Allow forms of communication that were previously separate to overlap and interconnect. Consequently, it has been the contention of scholars such as Douglas Kellner and James Bohman that new media and particularly the Internet will provide the potential for a democratic postmodern public sphere, in which citizens can participate in well informed, non-hierarchical debate pertaining to their social structures. Contradicting these positive appraisals of the potential social impacts of new media are scholars such as Edward S. Herman and Robert McChesney who have suggested that the transition to new media has seen a handful of powerful transnational telecommunications corporations who achieve a level of global influence which was hitherto unimaginable. Scholars have highlighted both the positive and negative potential and actual implications of new media technologies, suggesting that some of the early work in new media studies was guilty of technologicaldeterminism – whereby the effects of media were determined by the technologies themselves, rather than by tracing the complex social networks that governed the development, funding, implementation, and future evolution of any technology. Based on the argument that people have a limited amount of time to spend on the consumption of different media, displacement theory argue that the viewership or readership of one particular outlet leads to the reduction in the amount of time spent by the individual on another. The introduction of new media, such as the internet, therefore reduces the amount of time individuals would spend on existing "old" media, which could ultimately lead to the end of such traditional media. == Definition == Although, there are several ways that new media may be described, Lev Manovich, in an introduction to The New Media Reader, defines new media by using eight propositions: New media versus cyberculture – Cyberculture is the various social phenomena that are associated with the Internet and network communications (blogs, online multi-player gaming), whereas new media is concerned more with cultural objects and paradigms (digital to analog television, smartphones). New media as computer technology used as a distribution platform – New media are the cultural objects which use digital computer technology for distribution and exhibition. e.g. (at least for now) Internet, Web sites, computer multimedia, Blu-ray disks etc. The problem with this is that the definition must be revised every few years. The term "new media" will not be "new" anymore, as most forms of culture will be distributed through computers. New media as digital data controlled by software – The language of new media is based on the assumption that, in fact, all cultural objects that rely on digital representation and computer-based delivery do share a number of common qualities. New media is reduced to digital data that can be manipulated by software as any other data. Now media operations can create several versions of the same object. An example is an image stored as matrix data which can be manipulated and altered according to the additional algorithms implemented, such as color inversion, gray-scaling, sharpening, rasterizing, etc. New media as the mix between existing cultural conventions and the conventions of software – New media today can be understood as the mix between older cultural conventions for data representation, access, and manipulation and newer conventions of data representation, access, and manipulation. The "old" data are representations of visual reality and human experience, and the "new" data is numerical data. The computer is kept out of the key "creative" decisions, and is delegated to the position of a technician. e.g. In film, software is used in some areas of production, in others are created using computer animation. New media as the aesthetics that accompanies the early stage of every new modern media and communication technology – While ideological tropes indeed seem to be reappearing rather regularly, many aesthetic strategies may reappear two or three times ... In order for this approach to be truly useful it would be insufficient to simply name the strategies and tropes and to record the moments of their appearance; instead, we would have to develop a much more comprehensive analysis which would correlate the history of technology with social, political, and economical histories or the modern period. New media as faster execution of algorithms previously executed manually or through other technologies – Computers are a huge speed-up of what were previously manual techniques. e.g. calculators. Dramatically speeding up the execution makes possible previously non-existent representational technique. This also makes possible of many new forms of media art such as interactive multimedia and video games. On one level, a modern digital computer is just a faster calculator, we should not ignore its other identity: that of a cybernetic control device. New media as the encoding of modernist avant-garde; new media as metamedia – Manovi

  Read more →