AI Content Kaise Banaye Free

AI Content Kaise Banaye Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Linked timestamping

    Linked timestamping

    Linked timestamping is a type of trusted timestamping where issued time-stamps are related to each other. Each time-stamp would contain data that authenticates the time-stamp before it, the authentication would be authenticating the entire message, including the previous time-stamps authentication, making a chain. This makes it impossible to add a time-stamp in to the middle of the chain, as any time-stamps afterwards would be different. == Description == Linked timestamping creates time-stamp tokens which are dependent on each other, entangled in some authenticated data structure. Later modification of the issued time-stamps would invalidate this structure. The temporal order of issued time-stamps is also protected by this data structure, making backdating of the issued time-stamps impossible, even by the issuing server itself. The top of the authenticated data structure is generally published in some hard-to-modify and widely witnessed media, like printed newspaper or public blockchain. There are no (long-term) private keys in use, avoiding PKI-related risks. Suitable candidates for the authenticated data structure include: Linear hash chain Merkle tree (binary hash tree) Skip list The simplest linear hash chain-based time-stamping scheme is illustrated in the following diagram: The linking-based time-stamping authority (TSA) usually performs the following distinct functions: Aggregation For increased scalability the TSA might group time-stamping requests together which arrive within a short time-frame. These requests are aggregated together without retaining their temporal order and then assigned the same time value. Aggregation creates a cryptographic connection between all involved requests; the authenticating aggregate value will be used as input for the linking operation. Linking Linking creates a verifiable and ordered cryptographic link between the current and already issued time-stamp tokens. Publishing The TSA periodically publishes some links, so that all previously issued time-stamp tokens depend on the published link and that it is practically impossible to forge the published values. By publishing widely witnessed links, the TSA creates unforgeable verification points for validating all previously issued time-stamps. == Security == Linked timestamping is inherently more secure than the usual, public-key signature based time-stamping. All consequential time-stamps "seal" previously issued ones - hash chain (or other authenticated dictionary in use) could be built only in one way; modifying issued time-stamps is nearly as hard as finding a preimage for the used cryptographic hash function. Continuity of operation is observable by users; periodic publications in widely witnessed media provide extra transparency. Tampering with absolute time values could be detected by users, whose time-stamps are relatively comparable by system design. Absence of secret keys increases system trustworthiness. There are no keys to leak and hash algorithms are considered more future-proof than modular arithmetic based algorithms, e.g. RSA. Linked timestamping scales well - hashing is much faster than public key cryptography. There is no need for specific cryptographic hardware with its limitations. The common technology for guaranteeing long-term attestation value of the issued time-stamps (and digitally signed data) is periodic over-time-stamping of the time-stamp token. Because of missing key-related risks and of the plausible safety margin of the reasonably chosen hash function this over-time-stamping period of hash-linked token could be an order of magnitude longer than of public-key signed token. == Research == === Foundations === Stuart Haber and W. Scott Stornetta proposed in 1990 to link issued time-stamps together into linear hash-chain, using a collision-resistant hash function. The main rationale was to diminish TSA trust requirements. Tree-like schemes and operating in rounds were proposed by Benaloh and de Mare in 1991 and by Bayer, Haber and Stornetta in 1992. Benaloh and de Mare constructed a one-way accumulator in 1994 and proposed its use in time-stamping. When used for aggregation, one-way accumulator requires only one constant-time computation for round membership verification. Surety started the first commercial linked timestamping service in January 1995. Linking scheme is described and its security is analyzed in the following article by Haber and Sornetta. Buldas et al. continued with further optimization and formal analysis of binary tree and threaded tree based schemes. Skip-list based time-stamping system was implemented in 2005; related algorithms are quite efficient. === Provable security === Security proof for hash-function based time-stamping schemes was presented by Buldas, Saarepera in 2004. There is an explicit upper bound N {\displaystyle N} for the number of time stamps issued during the aggregation period; it is suggested that it is probably impossible to prove the security without this explicit bound - the so-called black-box reductions will fail in this task. Considering that all known practically relevant and efficient security proofs are black-box, this negative result is quite strong. Next, in 2005 it was shown that bounded time-stamping schemes with a trusted audit party (who periodically reviews the list of all time-stamps issued during an aggregation period) can be made universally composable - they remain secure in arbitrary environments (compositions with other protocols and other instances of the time-stamping protocol itself). Buldas, Laur showed in 2007 that bounded time-stamping schemes are secure in a very strong sense - they satisfy the so-called "knowledge-binding" condition. The security guarantee offered by Buldas, Saarepera in 2004 is improved by diminishing the security loss coefficient from N {\displaystyle N} to N {\displaystyle {\sqrt {N}}} . The hash functions used in the secure time-stamping schemes do not necessarily have to be collision-resistant or even one-way; secure time-stamping schemes are probably possible even in the presence of a universal collision-finding algorithm (i.e. universal and attacking program that is able to find collisions for any hash function). This suggests that it is possible to find even stronger proofs based on some other properties of the hash functions. At the illustration above hash tree based time-stamping system works in rounds ( t {\displaystyle t} , t + 1 {\displaystyle t+1} , t + 2 {\displaystyle t+2} , ...), with one aggregation tree per round. Capacity of the system ( N {\displaystyle N} ) is determined by the tree size ( N = 2 l {\displaystyle N=2^{l}} , where l {\displaystyle l} denotes binary tree depth). Current security proofs work on the assumption that there is a hard limit of the aggregation tree size, possibly enforced by the subtree length restriction. == Standards == ISO 18014 part 3 covers 'Mechanisms producing linked tokens'. American National Standard for Financial Services, "Trusted Timestamp Management and Security" (ANSI ASC X9.95 Standard) from June 2005 covers linking-based and hybrid time-stamping schemes. There is no IETF RFC or standard draft about linking based time-stamping. RFC 4998 (Evidence Record Syntax) encompasses hash tree and time-stamp as an integrity guarantee for long-term archiving.

    Read more →
  • Tensor glyph

    Tensor glyph

    In scientific visualization a tensor glyph is an object that can visualize all or most of the nine degrees of freedom, such as acceleration, twist, or shear – of a 3 × 3 {\displaystyle 3\times 3} matrix. It is used for tensor field visualization, where a data-matrix is available at every point in the grid. "Glyphs, or icons, depict multiple data values by mapping them onto the shape, size, orientation, and surface appearance of a base geometric primitive." Tensor glyphs are a particular case of multivariate data glyphs. There are certain types of glyphs that are commonly used: Ellipsoid Cuboid Cylindrical Superquadrics According to Thomas Schultz and Gordon Kindlmann, specific types of tensor fields "play a central role in scientific and biomedical studies as well as in image analysis and feature-extraction methods."

    Read more →
  • Texture compression

    Texture compression

    Texture compression is a specialized form of image compression designed for storing texture maps in 3D computer graphics rendering systems. Unlike conventional image compression algorithms, texture compression algorithms are optimized for random access. Texture compression can be applied to reduce memory usage at runtime. Texture data is often the largest source of memory usage in a mobile application. == Tradeoffs == In their seminal paper on texture compression, Beers, Agrawala and Chaddha list four features that tend to differentiate texture compression from other image compression techniques. These features are: Decoding Speed It is highly desirable to be able to render directly from the compressed texture data and so, in order not to impact rendering performance, decompression must be fast. Random Access Since predicting the order that a renderer accesses texels would be difficult, any texture compression scheme must allow fast random access to decompressed texture data. This tends to rule out many better-known image compression schemes such as JPEG or run-length encoding. Compression Rate and Visual Quality In a rendering system, lossy compression can be more tolerable than for other use cases. Some texture compression libraries, such as crunch, allow the developer to flexibly trade off compression rate vs. visual quality, using methods such as rate–distortion optimization (RDO). Encoding Speed Texture compression is more tolerant of asymmetric encoding/decoding rates as the encoding process is often done only once during the application authoring process. Given the above, most texture compression algorithms involve some form of fixed-rate lossy vector quantization of small fixed-size blocks of pixels into small fixed-size blocks of coding bits, sometimes with additional extra pre-processing and post-processing steps. Block Truncation Coding is a very simple example of this family of algorithms. Because their data access patterns are well-defined, texture decompression may be executed on-the-fly during rendering as part of the overall graphics pipeline, reducing overall bandwidth and storage needs throughout the graphics system. As well as texture maps, texture compression may also be used to encode other kinds of rendering map, including bump maps and surface normal maps. Texture compression may also be used together with other forms of map processing such as mipmaps and anisotropic filtering. == Availability == Some examples of practical texture compression systems are S3 Texture Compression (S3TC), PVRTC, Ericsson Texture Compression (ETC) and Adaptive Scalable Texture Compression (ASTC); these may be supported by special function units in modern graphics processing units (GPUs). OpenGL and OpenGL ES, as implemented on many video accelerator cards and mobile GPUs, can support multiple common kinds of texture compression - generally through the use of vendor extensions. == Supercompression == A compressed-texture can be further compressed in what is called "supercompression". Fixed-rate texture compression formats are optimized for random access and are much less efficient compared to image formats such as PNG. By adding further compression, a programmer can reduce the efficiency gap. The extra layer can be decompressed by the CPU so that the GPU receives a normal compressed texture, or in newer methods, decompressed by the GPU itself. Supercompression saves the same amount of VRAM as regular texture compression, but saves more disk space and download size. == Neural Texture Compression == Random-Access Neural Compression of Material Textures (Neural Texture Compression) is a Nvidia's technology which enables two additional levels of detail (16× more texels, so four times higher resolution) while maintaining similar storage requirements as traditional texture compression methods. The key idea is compressing multiple material textures and their mipmap chains together, and using a small neural network, that is optimized for each material, to decompress them.

    Read more →
  • Sprite multiplexing

    Sprite multiplexing

    Sprite multiplexing is a computer graphics technique where additional sprites (moving images) can be drawn on the screen, beyond the nominal maximum. It is largely historical, applicable principally to older hardware, where limited resources (such as CPU speed and memory) meant only a relatively small number of sprites were supported. On the other hand, it is also true that without multiplexing, the sprite circuitry would be idle much of the time, and limited resources were wasted. == Description == The sprite multiplexing technique is based on the idea that while the hardware may only support a finite number of sprites, it is sometimes possible to re-use the same sprite "slots" more than once per frame or scan line. The program will first use the hardware to draw one or more sprite(s), as normal. Before the next frame (or next scanline) needs to be drawn, the software reprograms the hardware to display additional sprites, in other positions. For example, the Nintendo Entertainment System explicitly supports hardware sprite multiplexing, where it has 64 hardware sprites, but is only capable of rendering 8 of them per scanline. On the older Atari 2600, sprite multiplexing was not intentionally designed in, but programmers discovered they could reset the TIA graphics chip to draw additional sprites on the same scanline. The sprite multiplexing technique relies on the program being able to identify what part of the video screen is being drawn at the moment, or being triggered by the video hardware to run a subroutine at the crucial moment. The programmer must carefully consider the layout of the screen. If the video graphics hardware is not reprogrammed in time for the extra sprites to be displayed, they will not appear, or will be drawn incorrectly. Modern video graphics hardware typically does not use hardware sprites, since modern computer systems do not have the kind of limitations that sprite hardware is designed to circumvent. == Implementations == Systems that allow the programmer to employ the sprite multiplexing technique include: Atari 2600 Atari 8-bit computers Amiga Commodore 64 MSX Nintendo Entertainment System Super Nintendo Entertainment System Master System Sega Genesis/Mega Drive

    Read more →
  • Artisse AI

    Artisse AI

    Artisse AI is a Hong Kong-based technology company founded by William Wu. The company developed a mobile photography application using generative artificial intelligence to transform selfies into high-quality, personalized images. The app allows users to visualize themselves in various scenarios, outfits, and hairstyles, and they can adjust lighting and ambiance to match their preferences. The app launched in 2023 across multiple markets, including the United States, United Kingdom, Japan, South Korea, Canada, and Australia. By January 2024, users had generated over 5 million images. That same month, the company secured $6.7 million in seed funding to support product development and marketing. == History == Artisse was originally founded in South Korea in 2022 by William Wu. The early concept was connected to a virtual idol initiative developed in collaboration with a K-pop agency, intended to support Wu's blockchain gaming business. The project later evolved into a standalone AI photography application. The current version of the Artisse app was developed following the company's relocation to Hong Kong in 2022. In January 2024, Artisse secured $6.7 million in seed funding, led by The London Fund. The investment was aimed at supporting product development, marketing, and user acquisition. Artisse uses an AI algorithm to create hyperrealistic images from uploaded photos. The app generates personalized images by combining generative AI technology, a global pool of licensed talent, and finished art services. The app works with individual users and businesses, offering professional-grade photos and advertisement images. According to the British newspaper Evening Standard the company has developed the world's first and most advanced AI photographer. It captures 15-30 photos of the user and generates 2D images, placing them in various outfits and locations worldwide. === Catheron Gaming === Artisse AI originated from Catheon Gaming, a blockchain gaming and entertainment company founded in 2021 by William Wu. Catheon Gaming published more than 30 Web3 titles in its first year, developed a blockchain game distribution platform, and offered advisory services to external developers. In 2022, HSBC and KPMG listed Catheon Gaming among the "Top 10 Emerging Giants" in the Asia–Pacific region, selected from a pool of more than 6,000 startups. In June 2023, Catheon Gaming was rebranded as Artisse Interactive, creating two divisions: Artisse Gaming, which continued blockchain and Web3 game development, and Artisse AI, which focused on generative photography technology. == Technology == Artisse uses a proprietary generative AI model combined with open-source imaging frameworks and diffusion models. Users are prompted to upload between 15 and 30 personal images, allowing the AI to train a personalized model in 30 to 40 minutes. After training, the app generates new images based on either textual or visual prompts, with options to adjust elements such as clothing, hairstyles, lighting, and backgrounds. To enhance realism, the app integrates augmented reality features and image refinement tools. The company has introduced features to address representation issues related to body shape and skin tone, although concerns persist about the ethical implications of altering personal traits. == Products == === Artisse mobile app === Available on iOS and Android platforms in 35 languages. Users initially receive 25 free images, after which the app adopts a subscription pricing model ranging from approximately $6 to $30 per month. By early 2024, the app reported around 4,000 paying subscribers out of more than 200,000 downloads. === Business and enterprise services === Artisse provides B2B solutions for creating marketing imagery and partners with agencies like Iconic Management to enable cost-effective virtual photoshoots. Additional features in development include virtual try-on capabilities and augmented reality integration for fashion retail. == Reception == Media coverage has noted the app's photorealistic image outputs with some sources highlighting its ease of use. However, concerns have been raised regarding image authenticity, algorithmic biases, and the potential impact on professional photography and modeling. Artisse has been widely covered by media outlets including TechCrunch, PetaPixel, Forbes Australia, and The Evening Standard. These publications discussed the app's integration of generative AI technology within the consumer photography space, its growing market influence, and its rapid adoption by users worldwide.

    Read more →
  • Himmat (app)

    Himmat (app)

    Himmat is a women's safety mobile application of Delhi Police. It was launched by Home Minister Rajnath Singh on 1 January 2015. The app is freely available for Android mobile phones and can be downloaded from Delhi Police website. Delhi Police plans to launch app for other platforms in future. Low registrations and other problems resulted in a parliamentary panel calling the app a failure in 2018. Himmat has gone on to be called as one of India's best safety apps for women.

    Read more →
  • Visible (mobile app)

    Visible (mobile app)

    Visible is a health tracking mobile app for people with long COVID and myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS). The company was founded by a Harry Leeming, an engineer from London living with long Covid since 2020, and Luke Martin-Fuller. In November 2022, Visible released an open beta of an app that aims to help people pace their activities to avoid post-exertional malaise. The app gathers data on exertion levels, symptom severity, and heart-rate variability. HRV is approximated using a smartphone's camera via a technique called photoplethysmography, and according to the app's developers, can indicate how much someone needs rest. The app is currently free, but is expected to be freemium in the future. Users can also opt to allow their data be used for research purposes. In July 2023, Visible and Imperial College London announced the start of the first two studies. One is on the effects of the menstrual cycle on long COVID symptoms, and the other is on the condition's epidemiology and economic impact. Visible has announced plans to couple the app with activity trackers for continuous monitoring of heart-rate and actimetry data, which the developers claim will be more effective. As of 2022, no clinical trials on Visible's effectiveness have been conducted.

    Read more →
  • The Visualization Handbook

    The Visualization Handbook

    The Visualization Handbook is a textbook by Charles D. Hansen and Christopher R. Johnson that serves as a survey of the field of scientific visualization by presenting the basic concepts and algorithms in addition to a current review of visualization research topics and tools. It is commonly used as a textbook for scientific visualization graduate courses. It is also commonly cited as a reference for scientific visualization and computer graphics in published papers, with almost 500 citations documented on Google Scholar. == Table of Contents == PART I - Introduction Overview of Visualization - William J. Schroeder and Kenneth M. Martin PART II - Scalar Field Visualization: Isosurfaces Accelerated Isosurface Extraction Approaches -Yarden Livnat Time-Dependent Isosurface Extraction - Han-Wei Shen Optimal Isosurface Extraction - Paolo Cignoni, Claudio Montani, Robert Scopigno, and Enrico Puppo Isosurface Extraction Using Extrema Graphs - Takayuki Itoh and Koji Koyamada Isosurfaces and Level-Sets - Ross Whitaker PART III - Scalar Field Visualization: Volume Rendering Overview of Volume Rendering - Arie E. Kaufman and Klaus Mueller Volume Rendering Using Splatting - Roger Crawfis, Daqing Xue, and Caixia Zhang Multidimensional Transfer Functions for Volume Rendering - Joe Kniss, Gordon Kindlmann, and Charles D. Hansen Pre-Integrated Volume Rendering - Martin Kraus and Thomas Ertl Hardware-Accelerated Volume Rendering - Hanspeter Pfister PART IV - Vector Field Visualization Overview of Flow Visualization - Daniel Weiskopf and Gordon Erlebacher Flow Textures: High-Resolution Flow Visualization - Gordon Erlebacher, Bruno Jobard, and Daniel Weiskopf Detection and Visualization of Vortices - Ming Jiang, Raghu Machiraju, and David Thompson PART V - Tensor Field Visualization Oriented Tensor Reconstruction - Leonid Zhukov and Alan H. Barr Diffusion Tensor MRI Visualization - Song Zhang, David Laidlaw, and Gordon Kindlmann Topological Methods for Flow Visualization - Gerik Scheuermann and Xavier Tricoche PART VI - Geometric Modeling for Visualization 3D Mesh Compression - Jarek Rossignac Variational Modeling Methods for Visualization - Hans Hagen and Ingrid Hotz Model Simplification - Jonathan D. Cohen and Dinesh Manocha PART VII - Virtual Environments for Visualization Direct Manipulation in Virtual Reality - Steve Bryson The Visual Haptic Workbench - Milan Ikits and J. Dean Brederson Virtual Geographic Information Systems - William Ribarsky Visualization Using Virtual Reality - R. Bowen Loftin, Jim X. Chen, and Larry Rosenblum PART VIII - Large-Scale Data Visualization Desktop Delivery: Access to Large Datasets - Philip D. Heermann and Constantine Pavlakos Techniques for Visualizing Time-Varying Volume Data - Kwan-Liu Ma and Eric B. Lum Large-Scale Data Visualization and Rendering: A Problem-Driven Approach - Patrick McCormick and James Ahrens Issues and Architectures in Large-Scale Data Visualization - Constantine Pavlakos and Philip D. Heermann Consuming Network Bandwidth with Visapult - Wes Bethel and John Shalf PART IX - Visualization Software and Frameworks The Visualization Toolkit - William J. Schroeder and Kenneth M. Martin Visualization in the SCIRun Problem-Solving Environment - David M. Weinstein, Steven Parker, Jenny Simpson, Kurt Zimmerman, and Greg M. Jones Numerical Algorithms Group IRIS Explorer - Jeremy Walton AVS and AVS/Express - Jean M. Favre and Mario Valle Vis5D, Cave5D, and VisAD - Bill Hibbard Visualization with AVS - W. T. Hewitt, Nigel W. John, Matthew D. Cooper, K. Yien Kwok, George W. Leaver, Joanna M. Leng, Paul G. Lever, Mary J. McDerby, James S. Perrin, Mark Riding, I. Ari Sadarjoen, Tobias M. Schiebeck, and Colin C. Venters ParaView: An End-User Tool for Large-Data Visualization - James Ahrens, Berk Geveci, and Charles Law The Insight Toolkit: An Open-Source Initiative in Data Segmentation and Registration - Terry S. Yoo amira: A Highly Interactive System for Visual Data Analysis - Detlev Stalling, Malte Westerhoff, and Hans-Christian Hege PART X - Perceptual Issues in Visualization Extending Visualization to Perceptualization: The Importance of Perception in Effective Communication of Information - David S. Ebert Art and Science in Visualization - Victoria Interrante Exploiting Human Visual Perception in Visualization - Alan Chalmers and Kirsten Cater PART XI - Selected Topics and Applications Scalable Network Visualization - Stephen G. Eick Visual Data-Mining Techniques - Daniel A. Keim, Mike Sips, and Mihael Ankerst Visualization in Weather and Climate Research - Don Middleton, Tim Scheitlin, and Bob Wilhelmson Painting and Visualization - Robert M. Kirby, Daniel F. Keefe, and David Laidlaw Visualization and Natural Control Systems for Microscopy - Russell M. Taylor II, David Borland, Frederick P. Brooks, Jr., Mike Falvo, Kevin Jeffay, Gail Jones, David Marshburn, Stergios J. Papadakis, Lu-Chang Qin, Adam Seeger, F. Donelson Smith, Dianne Sonnenwald, Richard Superfine, Sean Washburn, Chris Weigle, Mary Whitton, Leandra Vicci, Martin Guthold, Tom Hudson, Philip Williams, and Warren Robinett Visualization for Computational Accelerator Physics - Kwan-Liu Ma, Greg Schussman, and Brett Wilson

    Read more →
  • Space-based data center

    Space-based data center

    Space-based data centers or orbital AI infrastructure are proposed concepts to build AI data centers in the sun-synchronous orbit or other orbits utilizing space-based solar power. Electric power has become the main bottleneck for terrestrial AI infrastructure. Space-based edge computing has historical roots in military architectures designed to bypass the latency of ground-based targeting networks. In the 1980s, the Strategic Defense Initiative's Brilliant Pebbles program first envisioned autonomous on-orbit data processing for missile defense. In 2019, the Space Development Agency (SDA) began to revive this decentralized approach through its Proliferated Warfighter Space Architecture (PWSA). This ambitious "sensor-to-shooter" infrastructure is treated as a prerequisite for the modern Golden Dome program, which would rely on space-based data processing to continuously track targets. == History == Early thinking about space-based computing infrastructure grew out of mid-20th-century visions for large orbital industrial systems, most notably proposals for space-based solar power, which were popularized in both technical literature and science writing by figures such as Isaac Asimov in the 1940s. These ideas emphasized exploiting the vacuum, continuous solar energy, and thermal characteristics of space to support power-intensive activities that would be difficult or inefficient on Earth. In the 21st century, advances in small satellites, reusable launch vehicles, and high-performance computing revived interest in space-based data centers, with governments and private companies exploring orbital or near-space platforms for edge computing, secure data handling, and low-latency processing of Earth-observation data. In September 2024, Y Combinator-backed Starcloud released a white paper detailing plans to build multiple gigawatts of AI compute in orbit. It was the first widely cited proposal to actually start building large orbital data centers. In 2025, Starcloud deployed an NVIDIA H100-class system and became the first company to train an LLM in space and run a version of Google Gemini in space. In March 2025, Lonestar deployed a data backup machine on the surface of the moon. In early January 2026, a team from the University of Pennsylvania presented a tether-based architecture for orbital data centers at the AIAA SciTech conference. The design relied on gravity gradient tension and solar-pressure-based passive attitude stabilization to minimize the mass of MW-scale orbital data centers. In January 2026, SpaceX filed plans with the Federal Communications Commission (FCC) for millions of satellites, leveraging reusable launches and Starlink integration to extend cloud and AI computing into orbit. Around the same time, Blue Origin announced the TeraWave constellation of about 5,400 satellites, designed to provide high‑throughput networking for data centers, enterprise, and government customers. Meanwhile, China announced a 200,000‑satellite constellation, focusing on state coordination, data sovereignty, and in-orbit processing for secure, time-critical applications. In February 2026, Starcloud submitted a proposal to the FCC for a constellation of up to 88,000 satellites for orbital data centers. In March, it announced intentions to be the first to mine Bitcoin in space, flying bitcoin mining ASICs on its second satellite, Starcloud-2. In May 2026, Edge Aerospace was awarded a contract by the European Space Agency under its Space Cloud program to study use cases, architectures and implementation roadmap for orbital data centers. == Feasibility == In October 2025, Nature Electronics published a study led by a research group at Nanyang Technological University on the development of carbon-neutral data centres in space. In November 2025, Google published a feasibility study on space-based data centers. The authors argued that if launch costs to low earth orbit reached US$200/kg, the launch cost for data center satellites could be cost effective relative to current energy costs for ground-based data centers. They project this may occur around 2035 if SpaceX's Starship project scales to 180 launches/year by then. == Advantages == Some sun-synchronous orbit (SSO) planes have constant sunlight in the dawn/dusk which could provide continuous solar energy. SSO is a limited resource and proper management and sharing of it is required. Solar irradiance is 36% higher in Earth orbit than on the surface No Earth weather storms or clouds, however more exposed to Solar storms. No property tax or land-use regulation. Saves space for other land use. Ample space for scalability. Won't strain the power grid. Direct access to power source without additional infrastructure. == Disadvantages == The deployment of space-based data centers raises several technical, economic, and environmental concerns. Existing launch costs are substantial and remains main cost of space infrastructure deployment Cooling is limited to heat dissipation through radiation only, which made in inefficient in comparison to convection in terrestrial data centers Space infrastructure must be designed to survive launch and to work under environment conditions of radiation, wide range of temperatures, in vacuum and in microgravity In-space assembly is on early development stage to enable deployment of mega-structures Megastructures are particularly exposed to orbital debris Solar arrays efficiency decrease 0.5% to 0.8% per year due to exposure of ultraviolet rays, space weather and orbital thermal cycles Hardware is designed for limited lifespan. Maintenance and repair in space (known as On-Orbit Servicing (OOS)) is still on early stage of practical implementation. Disposable data centre: technology obsolescence of AI data centre being a concern and difficult maintenance in space imply the single-use purpose of those space data centres. To extend lifetime, space infrastructure will require either refueling or orbit rasie by the servicer, which is going to increase its operational costs The environmental impact on Earth has its own challenges: The environmental impact of launches need to be addressed. Deployment consumes Earth resources that cannot be recovered or recycled. Computers require lots of resources, some of which are strategic. Recycling e-waste is already a challenge on Earth and extremely unlikely in space. Space debris (orbit pollution) is another sustainability challenge for space: Orbits are, like any resources, a limited physical and electromagnetic resource and available for all mankind. The accumulation of satellites on a particular orbit reduces the use of space for other purposes. A consequence of the increase of satellite in orbit is a higher risk of the runaway of space debris (see Kessler syndrome). This means some orbits could become unusable. Latency and bandwidth are constrained in space, and consumes limited electromagnetic resources. Satellite flares could inhibit ground-based and space-based observational astronomy. == Size and power generated == It would take ~1 square mile solar array in earth orbit to produce 1 gigawatt of power at 30% cell efficiency. == Companies pursuing space-based AI infrastructure == Blue Origin Cowboy Space Corporation (formerly Aetherflux) Edge Aerospace Google – Project Suncatcher Nvidia OpenAI SpaceX Starcloud

    Read more →
  • AI content watermarking

    AI content watermarking

    AI content watermarking is the process of embedding imperceptible yet detectable signals into content generated by artificial intelligence systems, such as text, images, audio, or video. The technique allows the content to be traced and identified as machine-generated without compromising its quality for the end user. AI watermarking has emerged as a key approach to address growing concerns about misinformation, deepfakes, copyright infringement, and the traceability of synthetic content in the context of the rapid development of generative artificial intelligence. Unlike traditional visible watermarks used in photography, AI content watermarks are typically invisible to humans and can only be detected and deciphered algorithmically. The concept is distinct from the watermarking of AI models themselves (to prevent model theft) and from the watermarking of training data (to combat unauthorized data use). Modern AI watermarking schemes are typically formalized as a pair of algorithms, an embedding (or generation) algorithm and a detection algorithm, sharing a secret key, whose performance is evaluated along three competing axes: quality (the watermark must not noticeably degrade outputs), detectability (the watermark must be statistically distinguishable from unwatermarked content), and robustness (the watermark must persist under adversarial or incidental modifications). == Background == Digital watermarking has been used for decades to protect physical and digital media, from paper currency to photographs. Classical schemes typically embedded a fixed bit-string into a fixed cover signal, with robustness criteria defined against a small fixed set of distortions such as JPEG compression or additive Gaussian noise. The rapid advancement of generative AI in the early 2020s, however, created a new and qualitatively different demand: rather than protecting a single artifact, watermarks for AI content must be embedded automatically across an open-ended distribution of generated outputs while remaining robust to a much wider class of adversarial transformations, including paraphrasing, image regeneration via diffusion models, and re-recording. Large image generation models such as DALL-E, Stable Diffusion, and Midjourney, along with large language models like ChatGPT, made it possible to produce highly realistic synthetic text, images, audio, and video at scale, raising significant ethical and security concerns. In July 2023, the Biden administration secured voluntary commitments from leading AI companies, including OpenAI, Alphabet, Meta, and Amazon, to develop watermarking and other provenance technologies to help users identify AI-generated content. == Formal definitions and design goals == Most modern AI watermarking schemes can be formalized as a pair of algorithms ( W m , D e t e c t ) {\displaystyle ({\mathsf {Wm}},{\mathsf {Detect}})} parameterized by a secret key k {\displaystyle k} . The embedding algorithm W m {\displaystyle {\mathsf {Wm}}} takes a generative model M {\displaystyle M} (and optionally a prompt) and returns a watermarked output x {\displaystyle x} ; the detection algorithm D e t e c t ( x , k ) {\displaystyle {\mathsf {Detect}}(x,k)} outputs a real-valued score (typically a p-value or log-likelihood ratio) used to decide whether x {\displaystyle x} was produced by the watermarked generator. The literature evaluates such schemes along several largely conflicting criteria: Criteria for evaluation include imperceptibility or quality preservation, measured for text via perplexity and human preference judgments, and for images and audio via metrics such as PSNR, SSIM, LPIPS, or PESQ. Detectability is typically expressed as the true positive rate at a fixed false positive rate (e.g. 1% or 10^-6), or as the number of tokens or pixels needed to reach a given confidence level. Robustness refers to the requirement that the watermark should survive expected modifications like JPEG or MP3 compression, cropping, noise, paraphrasing, or machine translation. Distortion-freeness is a stronger property requiring that the marginal distribution of any single watermarked output be statistically identical to the unwatermarked model's distribution. Schemes due to Aaronson, Christ et al., and Kuditipudi et al. are distortion-free in this sense, while the original Kirchenbauer et al. scheme is not. Forgery resistance or unforgeability means an adversary without the secret key should be unable to produce content that passes detection. == Techniques == AI watermarking techniques vary significantly depending on the type of content being watermarked. At its core, the process involves two main stages: embedding (or encoding) the watermark, and detection. There are two primary methods for embedding: watermarking during content generation, which requires access to the AI model itself but is generally more robust, and post-generation watermarking, which can be applied to content from any source, including closed-source models. Watermarks can be broadly classified as visible, including overt marks such as logos or text overlays, or imperceptible, which are detectable only by algorithms. They can also be classified by durability: robust watermarks are designed to withstand common transformations such as compression, cropping, and re-encoding, while fragile watermarks are easily destroyed by any alteration, making them useful for tamper detection. A further axis distinguishes zero-bit watermarks, which only signal "this content was generated by model M," from multi-bit watermarks, which embed an arbitrary payload (such as a user identifier) that can be recovered at detection time. === Text === Text watermarking is considered one of the most challenging modalities because natural language offers relatively limited redundancy compared to images or audio. Modern approaches for large language models alter the autoregressive sampling process so that some statistical signature is left in the choice of tokens, while leaving the surface form of the text unchanged. The literature distinguishes three main families of generation-time text watermarks. Logit-biasing schemes (e.g. KGW) add a fixed bias δ {\displaystyle \delta } to a pseudorandomly selected subset of vocabulary logits before softmax sampling. Reweighting or sampling-based schemes (e.g. SynthID-Text) compose multiple pseudorandom tournaments over the model's full distribution. Distortion-free schemes based on the Gumbel-max trick or inverse transform sampling (Aaronson 2022; Kuditipudi et al. 2023; Christ et al. 2024) preserve the marginal output distribution of the model. ==== KGW: token-probability shifting ==== The pioneering "green list / red list" scheme of Kirchenbauer et al. (KGW), introduced at ICML 2023, is the foundation for most subsequent text watermarks. At each decoding step t {\displaystyle t} , a pseudorandom function (PRF) keyed by a secret k {\displaystyle k} is applied to a context window of h {\displaystyle h} previous tokens to deterministically partition the vocabulary V {\displaystyle V} of size N {\displaystyle N} into a "green list" G ⊂ V {\displaystyle G\subset V} of size γ N {\displaystyle \gamma N} and its complement, the "red list" R = V ∖ G {\displaystyle R=V\setminus G} , where γ ∈ ( 0 , 1 ) {\displaystyle \gamma \in (0,1)} (typically γ = 1 / 2 {\displaystyle \gamma =1/2} ) is the green fraction. A logits processor then increments every green-list logit by a fixed bias δ > 0 {\displaystyle \delta >0} before softmax: ℓ v ′ = ℓ v + δ ⋅ 1 [ v ∈ G ] {\displaystyle \ell '_{v}=\ell _{v}+\delta \cdot \mathbf {1} [v\in G]} so that, after sampling, green tokens are over-represented but generation is not constrained to green tokens alone; high-entropy positions tolerate the bias gracefully, while low-entropy positions (where one token dominates the logits) override the watermark and preserve correctness on factual content. Detection requires only the secret key and the candidate text, not the language model itself. The detector recomputes the partition g ( ⋅ ) {\displaystyle g(\cdot )} for each token, counts the number of green hits | G | hits {\displaystyle |G|_{\text{hits}}} in a sequence of length T {\displaystyle T} , and computes a one-proportion z-test statistic: z = | G | hits − γ T T γ ( 1 − γ ) {\displaystyle z={\frac {|G|_{\text{hits}}-\gamma T}{\sqrt {T\gamma (1-\gamma )}}}} Under the null hypothesis that the text was written by an unwatermarked source (human or another model), the green-hit count is approximately binomially distributed with mean γ T {\displaystyle \gamma T} ; a large positive z {\displaystyle z} rejects the null hypothesis. The original paper reports that fewer than 25 watermarked tokens are sufficient to detect a watermark with a false positive rate below 10^-5 on the OPT-1.3B model. A follow-up study by the same group documented robustness under temperature sampling, top-p (nucleus) sampling, and human paraphrasing, and proposed sliding-window

    Read more →
  • Nobody (username)

    Nobody (username)

    In many Unix variants, "nobody" is the conventional name of a user identifier which owns no files, is in no privileged groups, and has no abilities except those which every other user has. It is normally not enabled as a user account, i.e. has no home directory or login credentials assigned. Some systems also define an equivalent group "nogroup". == Uses == The pseudo-user "nobody" and group "nogroup" are used, for example, in the NFSv4 implementation of Linux by idmapd, if a user or group name in an incoming packet does not match any known username on the system. It was once common to run daemons as nobody, especially on servers, in order to limit the damage that could be done by a malicious user who gained control of them. However, the usefulness of this technique is reduced if more than one daemon is run like this, because then gaining control of one daemon would provide control of them all. The reason is that processes owned by the same user have the ability to send signals to each other and use debugging facilities to read or even modify each other's memory. Modern practice, as recommended by the Linux Standard Base, is to create a separate user account for each daemon.

    Read more →
  • Frame grabber

    Frame grabber

    A frame grabber is an electronic device that captures (i.e., "grabs") individual, digital still frames from an analog video signal or a digital video stream. It is usually employed as a component of a computer vision system, in which video frames are captured in digital form and then displayed, stored, transmitted, analyzed, or combinations of these. Historically, frame grabber expansion cards were the predominant way to interface cameras to PCs. Other interface methods have emerged since then, with frame grabbers (and in some cases, cameras with built-in frame grabbers) connecting to computers via interfaces such as USB, Ethernet and IEEE 1394 ("FireWire"). Early frame grabbers typically had only enough memory to store a single digitized video frame, whereas many modern frame grabbers can store multiple frames. Modern frame grabbers often are able to perform functions beyond capturing a single video input. For example, some devices capture audio in addition to video, and some devices provide, and concurrently capture frames from multiple video inputs. Other operations may be performed as well, such as deinterlacing, text or graphics overlay, image transformations (e.g., resizing, rotation, mirroring), and conversion to JPEG or other compressed image formats. To satisfy the technological demands of applications such as radar acquisition, manufacturing and remote guidance, some frame grabbers can capture images at high frame rates, high resolutions, or both. == Circuitry == Analog frame grabbers, which accept and process analog video signals, include these circuits: Input signal conditioner that buffers the analog video input signal to protect downstream circuitry Video decoder that converts SD analog video (e.g., NTSC, SECAM, PAL) or HD analog video (e.g., AHD, HD-TVI, HD-CVI) to a digital format Digital frame grabbers, which accept and process digital video streams, include these circuits: Digital video decoder that interfaces to and converts a specific type of digital video source, such as Camera Link, CoaXPress, DVI, GigE Vision, LVDS, or SDI Circuitry common to both analog and digital frame grabbers: Memory for storing the acquired image (i.e., a frame buffer) A bus interface through which a processor can control the acquisition and access the data General purpose I/O for triggering image acquisition or controlling external equipment == Applications == === Healthcare === Frame grabbers are used in medicine for many applications, including telenursing and remote guidance. In situations where an expert at another location needs to be consulted, frame grabbers capture the image or video from the appropriate medical equipment, so it can be sent digitally to the distant expert. === Manufacturing === "Pick and place" machines are often used to mount electronic components on circuit boards during the circuit board assembly process. Such machines use one or more cameras to monitor the robotics that places the components. Each camera is paired with a frame grabber that digitizes the analog video, thus converting the video to a form that can be processed by the machine software. === Network security === Frame grabbers may be used in security applications. For example, when a potential breach of security is detected, a frame grabber captures an image or a sequence of images, and then the images are transmitted across a digital network where they are recorded and viewed by security personnel. === Personal use === In recent years with the rise of personal video recorders like camcorders, mobile phones, etc. video and photo applications have gained ascending prominence. Frame grabbing is becoming very popular on these devices. === Astronomy & astrophotography === Amateur astronomers and astrophotographers use frame grabbers when using analog "low light" cameras for live image display and internet video broadcasting of celestial objects. Frame grabbers are essential to connect the analog cameras used in this application to the computers that store or process the images.

    Read more →
  • Neural network Gaussian process

    Neural network Gaussian process

    A Neural Network Gaussian Process (NNGP) is a Gaussian process (GP) obtained as the limit of a certain type of sequence of neural networks. Specifically, a wide variety of network architectures converges to a GP in the infinitely wide limit, in the sense of distribution. The concept constitutes an intensional definition, i.e., a NNGP is just a GP, but distinguished by how it is obtained. == Motivation == Bayesian networks are a modeling tool for assigning probabilities to events, and thereby characterizing the uncertainty in a model's predictions. Deep learning and artificial neural networks are approaches used in machine learning to build computational models which learn from training examples. Bayesian neural networks merge these fields. They are a type of neural network whose parameters and predictions are both probabilistic. While standard neural networks often assign high confidence even to incorrect predictions, Bayesian neural networks can more accurately evaluate how likely their predictions are to be correct. Computation in artificial neural networks is usually organized into sequential layers of artificial neurons. The number of neurons in a layer is called the layer width. When we consider a sequence of Bayesian neural networks with increasingly wide layers (see figure), they converge in distribution to a NNGP. This large width limit is of practical interest, since the networks often improve as layers get wider. And the process may give a closed form way to evaluate networks. NNGPs also appears in several other contexts: It describes the distribution over predictions made by wide non-Bayesian artificial neural networks after random initialization of their parameters, but before training; it appears as a term in neural tangent kernel prediction equations; it is used in deep information propagation to characterize whether hyperparameters and architectures will be trainable. It is related to other large width limits of neural networks. === Scope === The first correspondence result had been established in the 1995 PhD thesis of Radford M. Neal, then supervised by Geoffrey Hinton at University of Toronto. Neal cites David J. C. MacKay as inspiration, who worked in Bayesian learning. Today the correspondence is proven for: Single hidden layer Bayesian neural networks; deep fully connected networks as the number of units per layer is taken to infinity; convolutional neural networks as the number of channels is taken to infinity; transformer networks as the number of attention heads is taken to infinity; recurrent networks as the number of units is taken to infinity. In fact, this NNGP correspondence holds for almost any architecture: Generally, if an architecture can be expressed solely via matrix multiplication and coordinatewise nonlinearities (i.e., a tensor program), then it has an infinite-width GP. This in particular includes all feedforward or recurrent neural networks composed of multilayer perceptron, recurrent neural networks (e.g., LSTMs, GRUs), (nD or graph) convolution, pooling, skip connection, attention, batch normalization, and/or layer normalization. === Illustration === Every setting of a neural network's parameters θ {\displaystyle \theta } corresponds to a specific function computed by the neural network. A prior distribution p ( θ ) {\displaystyle p(\theta )} over neural network parameters therefore corresponds to a prior distribution over functions computed by the network. As neural networks are made infinitely wide, this distribution over functions converges to a Gaussian process for many architectures. The notation used in this section is the same as the notation used below to derive the correspondence between NNGPs and fully connected networks, and more details can be found there. The figure to the right plots the one-dimensional outputs z L ( ⋅ ; θ ) {\displaystyle z^{L}(\cdot ;\theta )} of a neural network for two inputs x {\displaystyle x} and x ∗ {\displaystyle x^{}} against each other. The black dots show the function computed by the neural network on these inputs for random draws of the parameters from p ( θ ) {\displaystyle p(\theta )} . The red lines are iso-probability contours for the joint distribution over network outputs z L ( x ; θ ) {\displaystyle z^{L}(x;\theta )} and z L ( x ∗ ; θ ) {\displaystyle z^{L}(x^{};\theta )} induced by p ( θ ) {\displaystyle p(\theta )} . This is the distribution in function space corresponding to the distribution p ( θ ) {\displaystyle p(\theta )} in parameter space, and the black dots are samples from this distribution. For infinitely wide neural networks, since the distribution over functions computed by the neural network is a Gaussian process, the joint distribution over network outputs is a multivariate Gaussian for any finite set of network inputs. == Discussion == === Infinitely wide fully connected network === This section expands on the correspondence between infinitely wide neural networks and Gaussian processes for the specific case of a fully connected architecture. It provides a proof sketch outlining why the correspondence holds, and introduces the specific functional form of the NNGP for fully connected networks. The proof sketch closely follows the approach by Novak and coauthors. ==== Network architecture specification ==== Consider a fully connected artificial neural network with inputs x {\displaystyle x} , parameters θ {\displaystyle \theta } consisting of weights W l {\displaystyle W^{l}} and biases b l {\displaystyle b^{l}} for each layer l {\displaystyle l} in the network, pre-activations (pre-nonlinearity) z l {\displaystyle z^{l}} , activations (post-nonlinearity) y l {\displaystyle y^{l}} , pointwise nonlinearity ϕ ( ⋅ ) {\displaystyle \phi (\cdot )} , and layer widths n l {\displaystyle n^{l}} . For simplicity, the width n L + 1 {\displaystyle n^{L+1}} of the readout vector z L {\displaystyle z^{L}} is taken to be 1. The parameters of this network have a prior distribution p ( θ ) {\displaystyle p(\theta )} , which consists of an isotropic Gaussian for each weight and bias, with the variance of the weights scaled inversely with layer width. This network is illustrated in the figure to the right, and described by the following set of equations: x ≡ input y l ( x ) = { x l = 0 ϕ ( z l − 1 ( x ) ) l > 0 z i l ( x ) = ∑ j W i j l y j l ( x ) + b i l W i j l ∼ N ( 0 , σ w 2 n l ) b i l ∼ N ( 0 , σ b 2 ) ϕ ( ⋅ ) ≡ nonlinearity y l ( x ) , z l − 1 ( x ) ∈ R n l × 1 n L + 1 = 1 θ = { W 0 , b 0 , … , W L , b L } {\displaystyle {\begin{aligned}x&\equiv {\text{input}}\\y^{l}(x)&=\left\{{\begin{array}{lcl}x&&l=0\\\phi \left(z^{l-1}(x)\right)&&l>0\end{array}}\right.\\z_{i}^{l}(x)&=\sum _{j}W_{ij}^{l}y_{j}^{l}(x)+b_{i}^{l}\\W_{ij}^{l}&\sim {\mathcal {N}}\left(0,{\frac {\sigma _{w}^{2}}{n^{l}}}\right)\\b_{i}^{l}&\sim {\mathcal {N}}\left(0,\sigma _{b}^{2}\right)\\\phi (\cdot )&\equiv {\text{nonlinearity}}\\y^{l}(x),z^{l-1}(x)&\in \mathbb {R} ^{n^{l}\times 1}\\n^{L+1}&=1\\\theta &=\left\{W^{0},b^{0},\dots ,W^{L},b^{L}\right\}\end{aligned}}} ==== ==== z l | y l {\displaystyle z^{l}|y^{l}} is a Gaussian process We first observe that the pre-activations z l {\displaystyle z^{l}} are described by a Gaussian process conditioned on the preceding activations y l {\displaystyle y^{l}} . This result holds even at finite width. Each pre-activation z i l {\displaystyle z_{i}^{l}} is a weighted sum of Gaussian random variables, corresponding to the weights W i j l {\displaystyle W_{ij}^{l}} and biases b i l {\displaystyle b_{i}^{l}} , where the coefficients for each of those Gaussian variables are the preceding activations y j l {\displaystyle y_{j}^{l}} . Because they are a weighted sum of zero-mean Gaussians, the z i l {\displaystyle z_{i}^{l}} are themselves zero-mean Gaussians (conditioned on the coefficients y j l {\displaystyle y_{j}^{l}} ). Since the z l {\displaystyle z^{l}} are jointly Gaussian for any set of y l {\displaystyle y^{l}} , they are described by a Gaussian process conditioned on the preceding activations y l {\displaystyle y^{l}} . The covariance or kernel of this Gaussian process depends on the weight and bias variances σ w 2 {\displaystyle \sigma _{w}^{2}} and σ b 2 {\displaystyle \sigma _{b}^{2}} , as well as the second moment matrix K l {\displaystyle K^{l}} of the preceding activations y l {\displaystyle y^{l}} , z i l ∣ y l ∼ G P ( 0 , σ w 2 K l + σ b 2 ) K l ( x , x ′ ) = 1 n l ∑ i y i l ( x ) y i l ( x ′ ) {\displaystyle {\begin{aligned}z_{i}^{l}\mid y^{l}&\sim {\mathcal {GP}}\left(0,\sigma _{w}^{2}K^{l}+\sigma _{b}^{2}\right)\\K^{l}(x,x')&={\frac {1}{n^{l}}}\sum _{i}y_{i}^{l}(x)y_{i}^{l}(x')\end{aligned}}} The effect of the weight scale σ w 2 {\displaystyle \sigma _{w}^{2}} is to rescale the contribution to the covariance matrix from K l {\displaystyle K^{l}} , while the bias is shared for all inputs, and so σ b 2 {\displaystyle \sigma _{b}^{2}} makes the z i l {\displaystyle z_{i}^{l}} for different datapoints more similar and

    Read more →
  • Gooch shading

    Gooch shading

    Gooch shading is a non-photorealistic rendering technique for shading objects. It is also known as "cool to warm" shading, and is widely used in technical illustration. == History == Gooch shading was developed by Amy Gooch et al. at the University of Utah School of Computing and first presented at the 1998 SIGGRAPH conference. It has since been implemented in shader libraries, software, and games released by Autodesk, Nvidia, and Valve. == Process == Gooch shading defines an additional two colors in conjunction with the original model color: a warm color (such as yellow) and a cool color (such as blue). The warm color indicates surfaces that are facing toward the light source while the cool color indicates surfaces facing away. This allows shading to occur only in mid-tones so that edge lines and highlights remain visually prominent. The Gooch shader is typically implemented in two passes: all objects in the scene are first drawn with the "cool to warm" shading, and in the second pass the object's edges are rendered in black.

    Read more →
  • Multi-model database

    Multi-model database

    In the field of database design, a multi-model database is a database management system designed to support multiple data models against a single, integrated backend. In contrast, most database management systems are organized around a single data model that determines how data can be organized, stored, and manipulated. Document, graph, relational, and key–value models are examples of data models that may be supported by a multi-model database. == Background == The relational data model became popular after its publication by Edgar F. Codd in 1970. Due to increasing requirements for horizontal scalability and fault tolerance, NoSQL databases became prominent after 2009. NoSQL databases use a variety of data models, with document, graph, and key–value models being popular. A multi-model database is a database that can store, index and query data in more than one model. For some time, databases have primarily supported only one model, such as: relational database, document-oriented database, graph database or triplestore. A database that combines many of these is multi-model. This should not be confused with multimodal database systems such as Pixeltable or ApertureDB, which focus on unified management of different media types (images, video, audio, text) rather than different data models. For some time, it was all but forgotten (or considered irrelevant) that there were any other database models besides relational. The relational model and notion of third normal form were the default standard for all data storage. However, prior to the dominance of relational data modeling, from about 1980 to 2005, the hierarchical database model was commonly used. Since 2000 or 2010, many NoSQL models that are non-relational, including documents, triples, key–value stores and graphs are popular. Arguably, geospatial data, temporal data, and text data are also separate models, though indexed, queryable text data is generally termed a "search engine" rather than a database. The first time the word "multi-model" has been associated to the databases was on May 30, 2012 in Cologne, Germany, during the Luca Garulli's key note "NoSQL Adoption – What’s the Next Step?". Luca Garulli envisioned the evolution of the 1st generation NoSQL products into new products with more features able to be used by multiple use cases. The idea of multi-model databases can be traced back to Object–Relational Data Management Systems (ORDBMS) in the early 1990s and in a more broader scope even to federated and integrated DBMSs in the early 1980s. An ORDBMS system manages different types of data such as relational, object, text and spatial by plugging domain specific data types, functions and index implementations into the DBMS kernels. A multi-model database is most directly a response to the "polyglot persistence" approach of knitting together multiple database products, each handing a different model, to achieve a multi-model capability as described by Martin Fowler. This strategy has two major disadvantages: it leads to a significant increase in operational complexity, and there is no support for maintaining data consistency across the separate data stores, so multi-model databases have begun to fill in this gap. Multi-model databases are intended to offer the data modeling advantages of polyglot persistence, without its disadvantages. Operational complexity, in particular, is reduced through the use of a single data store. == Benchmarking multi-model databases == As more and more platforms are proposed to deal with multi-model data, there are a few works on benchmarking multi-model databases. For instance, Pluciennik, Oliveira, and UniBench reviewed existing multi-model databases and made an evaluation effort towards comparing multi-model databases and other SQL and NoSQL databases respectively. They pointed out that the advantages of multi-model databases over single-model databases are as follows : == Architecture == The main difference between the available multi-model databases is related to their architectures. Multi-model databases can support different models either within the engine or via different layers on top of the engine. Some products may provide an engine which supports documents and graphs while others provide layers on top of a key-key store. With a layered architecture, each data model is provided via its own component. == User-defined data models == In addition to offering multiple data models in a single data store, some databases allow developers to easily define custom data models. This capability is enabled by ACID transactions with high performance and scalability. In order for a custom data model to support concurrent updates, the database must be able to synchronize updates across multiple keys. ACID transactions, if they are sufficiently performant, allow such synchronization. JSON documents, graphs, and relational tables can all be implemented in a manner that inherits the horizontal scalability and fault-tolerance of the underlying data store. == Theoretical Foundation for Multi-Model Databases == The traditional theory of relations is not enough to accurately describe multi-model database systems. Recent research is focused on developing a new theoretical foundation for these systems. Category theory can provide a unified, rigorous language for modeling, integrating, and transforming different data models. By representing multi-model data as sets and their relationships as functions or relations within the Set category, we can create a formal framework to describe, manipulate, and understand various data models and how they interact.

    Read more →