AI Detector Zero Chatgpt

AI Detector Zero Chatgpt — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Robinson compass mask

    Robinson compass mask

    In image processing, a Robinson compass mask is a type of compass mask used for edge detection. It has eight major compass orientations, each will extract the edges in respect to its direction. A combined use of compass masks of different directions could detect the edges from different angles. == Technical explanation == The Robinson compass mask is defined by taking a single mask and rotating it to form eight orientations: North: [ − 1 0 1 − 2 0 2 − 1 0 1 ] {\displaystyle {\text{North:}}{\begin{bmatrix}-1&0&1\\-2&0&2\\-1&0&1\end{bmatrix}}} North West: [ 0 1 2 − 1 0 1 − 2 − 1 0 ] {\displaystyle {\text{North West:}}{\begin{bmatrix}0&1&2\\-1&0&1\\-2&-1&0\end{bmatrix}}} West: [ 1 2 1 0 0 0 − 1 − 2 − 1 ] {\displaystyle {\text{West:}}{\begin{bmatrix}1&2&1\\0&0&0\\-1&-2&-1\end{bmatrix}}} South West: [ 2 1 0 1 0 − 1 0 − 1 − 2 ] {\displaystyle {\text{South West:}}{\begin{bmatrix}2&1&0\\1&0&-1\\0&-1&-2\end{bmatrix}}} South: [ 1 0 − 1 2 0 − 2 1 0 − 1 ] {\displaystyle {\text{South:}}{\begin{bmatrix}1&0&-1\\2&0&-2\\1&0&-1\end{bmatrix}}} South East: [ 0 − 1 − 2 1 0 − 1 2 1 0 ] {\displaystyle {\text{South East:}}{\begin{bmatrix}0&-1&-2\\1&0&-1\\2&1&0\end{bmatrix}}} East: [ − 1 − 2 − 1 0 0 0 1 2 1 ] {\displaystyle {\text{East:}}{\begin{bmatrix}-1&-2&-1\\0&0&0\\1&2&1\end{bmatrix}}} North East: [ − 2 − 1 0 − 1 0 1 0 1 2 ] {\displaystyle {\text{North East:}}{\begin{bmatrix}-2&-1&0\\-1&0&1\\0&1&2\end{bmatrix}}} The direction axis is the line of zeros in the matrix. Robinson compass mask is similar to kirsch compass masks, but is simpler to implement. Since the matrix coefficients only contains 0, 1, 2, and are symmetrical, only the results of four masks need to be calculated, the other four results are the negation of the first four results. An edge, or contour is an tiny area with neighboring distinct pixel values. The convolution of each mask with the image would create a high value output where there is a rapid change of pixel value, thus an edge point is found. All the detected edge points would line up as edges. == Example == An example of Robinson compass masks applied to the original image. Obviously, the edges in the direction of the mask is enhanced.

    Read more →
  • CN2 algorithm

    CN2 algorithm

    The CN2 induction algorithm is a learning algorithm for rule induction. It is designed to work even when the training data is imperfect. It is based on ideas from the AQ algorithm and the ID3 algorithm. As a consequence it creates a rule set like that created by AQ but is able to handle noisy data like ID3. == Description of algorithm == The algorithm must be given a set of examples, TrainingSet, which have already been classified in order to generate a list of classification rules. A set of conditions, SimpleConditionSet, which can be applied, alone or in combination, to any set of examples is predefined to be used for the classification. routine CN2(TrainingSet) let the ClassificationRuleList be empty repeat let the BestConditionExpression be Find_BestConditionExpression(TrainingSet) if the BestConditionExpression is not nil then let the TrainingSubset be the examples covered by the BestConditionExpression remove from the TrainingSet the examples in the TrainingSubset let the MostCommonClass be the most common class of examples in the TrainingSubset append to the ClassificationRuleList the rule 'if ' the BestConditionExpression ' then the class is ' the MostCommonClass until the TrainingSet is empty or the BestConditionExpression is nil return the ClassificationRuleList routine Find_BestConditionExpression(TrainingSet) let the ConditionalExpressionSet be empty let the BestConditionExpression be nil repeat let the TrialConditionalExpressionSet be the set of conditional expressions, {x and y where x belongs to the ConditionalExpressionSet and y belongs to the SimpleConditionSet}. remove all formulae in the TrialConditionalExpressionSet that are either in the ConditionalExpressionSet (i.e., the unspecialized ones) or null (e.g., big = y and big = n) for every expression, F, in the TrialConditionalExpressionSet if F is statistically significant and F is better than the BestConditionExpression by user-defined criteria when tested on the TrainingSet then replace the current value of the BestConditionExpression by F while the number of expressions in the TrialConditionalExpressionSet > user-defined maximum remove the worst expression from the TrialConditionalExpressionSet let the ConditionalExpressionSet be the TrialConditionalExpressionSet until the ConditionalExpressionSet is empty return the BestConditionExpression

    Read more →
  • Junction tree algorithm

    Junction tree algorithm

    The junction tree algorithm (also known as 'Clique Tree') is a method used in machine learning to extract marginalization in general graphs. In essence, it entails performing belief propagation on a modified graph called a junction tree. The graph is called a tree because it branches into different sections of data; nodes of variables are the branches. The basic premise is to eliminate cycles by clustering them into single nodes. Multiple extensive classes of queries can be compiled at the same time into larger structures of data. There are different algorithms to meet specific needs and for what needs to be calculated. Inference algorithms gather new developments in the data and calculate it based on the new information provided. == Junction tree algorithm == === Hugin algorithm === If the graph is directed then moralize it to make it un-directed. Introduce the evidence. Triangulate the graph to make it chordal. Construct a junction tree from the triangulated graph (we will call the vertices of the junction tree "supernodes"). Propagate the probabilities along the junction tree (via belief propagation) Note that this last step is inefficient for graphs of large treewidth. Computing the messages to pass between supernodes involves doing exact marginalization over the variables in both supernodes. Performing this algorithm for a graph with treewidth k will thus have at least one computation which takes time exponential in k. It is a message passing algorithm. The Hugin algorithm takes fewer computations to find a solution compared to Shafer-Shenoy. === Shafer-Shenoy algorithm === Computed recursively Multiple recursions of the Shafer-Shenoy algorithm results in Hugin algorithm Found by the message passing equation Separator potentials are not stored The Shafer-Shenoy algorithm is the sum product of a junction tree. It is used because it runs programs and queries more efficiently than the Hugin algorithm. The algorithm makes calculations for conditionals for belief functions possible. Joint distributions are needed to make local computations happen. === Underlying theory === The first step concerns only Bayesian networks, and is a procedure to turn a directed graph into an undirected one. We do this because it allows for the universal applicability of the algorithm, regardless of direction. The second step is setting variables to their observed value. This is usually needed when we want to calculate conditional probabilities, so we fix the value of the random variables we condition on. Those variables are also said to be clamped to their particular value. The third step is to ensure that graphs are made chordal if they aren't already chordal. This is the first essential step of the algorithm. It makes use of the following theorem: Theorem: For an undirected graph, G, the following properties are equivalent: Graph G is triangulated. The clique graph of G has a junction tree. There is an elimination ordering for G that does not lead to any added edges. Thus, by triangulating a graph, we make sure that the corresponding junction tree exists. A usual way to do this, is to decide an elimination order for its nodes, and then run the Variable elimination algorithm. The variable elimination algorithm states that the algorithm must be run each time there is a different query. This will result to adding more edges to the initial graph, in such a way that the output will be a chordal graph. All chordal graphs have a junction tree. The next step is to construct the junction tree. To do so, we use the graph from the previous step, and form its corresponding clique graph. Now the next theorem gives us a way to find a junction tree: Theorem: Given a triangulated graph, weight the edges of the clique graph by their cardinality, |A∩B|, of the intersection of the adjacent cliques A and B. Then any maximum-weight spanning tree of the clique graph is a junction tree. So, to construct a junction tree we just have to extract a maximum weight spanning tree out of the clique graph. This can be efficiently done by, for example, modifying Kruskal's algorithm. The last step is to apply belief propagation to the obtained junction tree. Usage: A junction tree graph is used to visualize the probabilities of the problem. The tree can become a binary tree to form the actual building of the tree. A specific use could be found in auto encoders, which combine the graph and a passing network on a large scale automatically. === Inference Algorithms === Loopy belief propagation: A different method of interpreting complex graphs. The loopy belief propagation is used when an approximate solution is needed instead of the exact solution. It is an approximate inference. Cutset conditioning: Used with smaller sets of variables. Cutset conditioning allows for simpler graphs that are easier to read but are not exact.

    Read more →
  • Operational taxonomic unit

    Operational taxonomic unit

    An operational taxonomic unit (OTU) is an operational definition used to classify groups of closely related individuals. The term was originally introduced in 1963 by Robert R. Sokal and Peter H. A. Sneath in the context of numerical taxonomy, where an "operational taxonomic unit" is simply the group of organisms currently being studied. In this sense, an OTU is a pragmatic definition to group individuals by similarity, equivalent to but not necessarily in line with classical Linnaean taxonomy or modern evolutionary taxonomy. Nowadays, however, the term is commonly used in a different context and refers to clusters of (uncultivated or unknown) organisms, grouped by DNA sequence similarity of a specific taxonomic marker gene (originally coined as mOTU; molecular OTU). In other words, OTUs are pragmatic proxies for "species" at different taxonomic levels, in the absence of traditional systems of biological classification as are available for macroscopic organisms. For several years, OTUs have been the most commonly used units of diversity, especially when analysing small subunit 16S (for prokaryotes) or 18S rRNA (for eukaryotes) marker gene sequence datasets. == Molecular OTU by clustering of marker gene sequences == In the approach represented by DNA barcoding, a particular locus is chosen to be used as the marker gene for classification. This locus should be universally present in the scope selected, variable enough to be different among close-related species, and be flanked by conservative sequences that allow for easy amplification and detection. There are databases containing sequences for such marker genes from many different species, allowing for comparison. (Sometimes only using one locus does not provide sufficient resolution, so multiple marker genes are used. This is the case for plants, where rbcL+matK is common.) Sequences obtained this way can be clustered according to their similarity to one another, and operational taxonomic units are defined based on the similarity threshold set by the researcher. The exact threshold depends on the taxa in question and the mutational rates of the selected locus in the taxon. 97–99% are commonly used, but "it is now recognized to be somewhat arbitrary as sequence variation within and among species varies across taxa". 100% similarity (fully identical) is also common, also known as single variants. It remains debatable how well this commonly used method recapitulates true microbial species phylogeny or ecology. Although OTUs can be calculated differently when using different algorithms or thresholds, research by Schmidt et al. (2014) demonstrated that 16S-derived microbial OTUs were generally ecologically consistent across habitats and several clustering approaches. The number of OTUs defined may be inflated due to errors in DNA sequencing. === OTU clustering approaches === There are three main approaches to clustering OTUs: De novo, for which the clustering is based on similarities between sequencing reads. Closed-reference, for which the clustering is performed against a reference database of sequences. Open-reference, where clustering is first performed against a reference database of sequences, then any remaining sequences that could not be mapped to the reference are clustered de novo. Using a reference provides taxonomic context for the OTUs found. Alternatively, taxonomic context can be found after the construction of clusters by comparing representative sequences from clusters against a reference database. There are also specialized classifiers for this purpose which are much faster than naive comparison using BLAST. === OTU clustering algorithms === Hierarchical clustering algorithms (HCA): uclust & cd-hit & ESPRIT Bayesian clustering: CROP == Molecular OTU by other methods == In addition to similarity-based grouping, marker gene sequences can be sorted into OTUs using molecular phylogeny, k-mer composition, or hybrid methods combining these methods with similarity. There are also Bayesian tree-less methods and machine learning approaches. Using phylogeny often involves manually assigning terminal clades or single nodes to an OTU, so this is usually only done for refinement. Genome skimming can be used to obtain high-copy DNA without the need to choose marker genes or to design PCR primers for the chosen genes. It can provide fairly good coverage of organelle DNA and repetitive elements such as ribosomal DNA, both of which can be used like marker genes in OTU analysis. Whole-genome sequencing is more expensive and involves the production and processing of more data. By considering the entire genome, many (sometimes over 100) marker genes can be used at the same time, producing highly resolved phylogenies that correctly identify problematic taxa. It is also possible to use entire genomes for OTU assignment. For example, genomes from different bacterial species almost always have an average nucleotide identity lower than 95%, a fact that can be used to define new OTUs (and likely new species).

    Read more →
  • Lingua Libre

    Lingua Libre

    Lingua Libre is an online collaborative project and tool by the Wikimédia France association, which aims to build a collaborative, multilingual, audiovisual speech corpus under a free license. It mostly consists of a rapid recording online service which allows the user to chain hundreds of recordings. Contributors have produced content in 310+ languages. == Description == Lingua Libre enables the recording of words, phrases or sentences of any language, oral (audio recording) or signed (video recording). Words are presented to the speaker in the form of a list, created on the spot, in advance, or by reusing an existing Wikimedia category. The speaker simply reads the word displayed on the screen, and the software moves on to the next word when it detects a silence after the read word. This principle, borrowed from the open source software Shtooka recorder with the help of its creator, Nicolas Vion, makes it possible to record several hundreds of words per hour. The recordings are then uploaded automatically from the web client to the Wikimedia Commons media library. In spring 2021, Lingua Libre was offline due to a fire in Strasbourg, but no audio recordings were lost. === Use of the recordings === The recordings can be consulted either on Lingua Libre or on Commons. They are mainly used on other Wikimedia projects, for example to illustrate entries on Wiktionaries or proper nouns in Wikipedia articles. The re-use of the recordings in a language teaching context is envisaged. Language learners can freely download pronunciations and use them on GoldenDict, a popular dictionary software. Thus, audio recordings can be used as “Pronunciation Dictionaries” on GoldenDict without needing internet connection. The recordings are also reused in Natural Language Processing projects, for example to drive Mozilla's DeepSpeech speech recognition engines. == Versions == Lingua Libre was initiated on January 23, 2015 and has had three successive versions: === Lingua Libre v.1 (2016) === As part of the Languages of France project, which aims to document and promote the regional languages of France on Wikimedia and Internet projects in general, the conception of Lingua Libre started in November 2015, partly funded by the DGLFLF (General Delegation for the French language and the languages of France). The first version of the project was launched in August 2016. Only suitable for audio recording, Lingua Libre was shown during a workshop on Occitan language in December 2016, and then presented to the online Wikimedia community and at international events in 2017. === Lingua Libre v.2 (2018) === A complete rebuilding was launched at the end of 2017. The new version of Lingua Libre is based on MediaWiki, uses Wikibase and OAuth to better integrate into the Wikimedia environment. The interface is translated via Translatewiki.net so that the project can be used by a large number of communities. The new version of the site was ready in June 2018 and opened to the public in August 2018. === Lingua Libre v.2.2 (2020) === In 2020, important changes were made to the platform; a new look was developed especially for the site, the .org domain replaced the .fr domain used until then, and added support for sign languages through video recording. == Statistics == In the first two years of the project's launch, approximately 10,000 recordings were made. The transition to v.2 was accompanied by a sharp increase in the contributions. The number of recordings multiplied by 10 in less than a year, exceeding the 100,000 threshold in May 2019. These recordings were made by 127 speakers in almost 50 languages. By September 2020, the platform had more than 300,000 recordings in 90 languages with more than 350 speakers. The 500,000 recordings milestone was reached in June 2021, thanks to 540 speakers of 120 languages.

    Read more →
  • Sample exclusion dimension

    Sample exclusion dimension

    In computational learning theory, sample exclusion dimensions arise in the study of exact concept learning with queries. In algorithmic learning theory, a concept over a domain X is a Boolean function over X. Here we only consider finite domains. A partial approximation S of a concept c is a Boolean function over Y ⊆ X {\displaystyle Y\subseteq X} such that c is an extension to S. Let C be a class of concepts and c be a concept (not necessarily in C). Then a specifying set for c w.r.t. C, denoted by S is a partial approximation S of c such that C contains at most one extension to S. If we have observed a specifying set for some concept w.r.t. C, then we have enough information to verify a concept in C with at most one more mind change. The exclusion dimension, denoted by XD(C), of a concept class is the maximum of the size of the minimum specifying set of c' with respect to C, where c' is a concept not in C.

    Read more →
  • Correlation clustering

    Correlation clustering

    Clustering is the problem of partitioning data points into groups based on similarity or dissimilarity. Correlation clustering is a clustering framework in which a set of objects is partitioned into clusters based on pairwise similarity and dissimilarity information, without requiring the number of clusters to be specified in advance. == Description of the problem == In machine learning, correlation clustering (also known as cluster editing) considers settings in which pairwise similarity or dissimilarity relationships between objects are known. A standard formulation models the input as an unweighted complete graph G = ( V , E ) {\displaystyle G=(V,E)} , where each edge is labeled either + {\displaystyle +} or − {\displaystyle -} (that is, the graph is a signed graph), indicating whether the corresponding endpoints are similar or dissimilar. The goal is to find a clustering (that is, a partition of V {\displaystyle V} ) that either maximizes the number of agreements—the sum of positive edges whose endpoints lie in the same cluster and negative edges whose endpoints lie in different clusters—or minimizes the number of disagreements—the sum of positive edges whose endpoints are separated and negative edges whose endpoints lie in the same cluster. Unlike other clustering methods such as k-means, correlation clustering does not require choosing the number of clusters k {\displaystyle k} in advance. It is not always possible to find a clustering with zero disagreements. For example, consider a triangle graph containing two positive edges and one negative edge. In this case, every clustering incurs at least one disagreement. Such configurations are referred to in the literature as bad triangles. From a computational perspective, optimizing the correlation clustering objective is challenging. The (decision version of the) problem is NP-complete. A large body of subsequent work has developed approximation algorithms for correlation clustering under various assumptions, including complete or general graphs and unweighted or weighted graphs, for both minimization and maximization objectives. This problem is considered one of the fundamental combinatorial optimization problems, and many algorithmic techniques have been developed to address it. The problem has also been studied extensively across multiple disciplines. A comprehensive literature review of early correlation clustering research is provided by Wahid and Hassini. == Formal Definitions == Let G = ( V , E ) {\displaystyle G=(V,E)} be a graph with nodes V {\displaystyle V} and edges E {\displaystyle E} . A clustering of G {\displaystyle G} is a partition of its node set Π = { π 1 , … , π k } {\displaystyle \Pi =\{\pi _{1},\dots ,\pi _{k}\}} with V = π 1 ∪ ⋯ ∪ π k {\displaystyle V=\pi _{1}\cup \dots \cup \pi _{k}} and π i ∩ π j = ∅ {\displaystyle \pi _{i}\cap \pi _{j}=\emptyset } for i ≠ j {\displaystyle i\neq j} . For a given clustering Π {\displaystyle \Pi } , let δ ( Π ) = { { u , v } ∈ E ∣ { u , v } ⊈ π ∀ π ∈ Π } {\displaystyle \delta (\Pi )=\{\{u,v\}\in E\mid \{u,v\}\not \subseteq \pi \;\forall \pi \in \Pi \}} denote the subset of edges of G {\displaystyle G} whose endpoints are in different subsets of the clustering Π {\displaystyle \Pi } . Now, let w : E → R ≥ 0 {\displaystyle w\colon E\to \mathbb {R} _{\geq 0}} be a function that assigns a non-negative weight to each edge of the graph and let E = E + ∪ E − {\displaystyle E=E^{+}\cup E^{-}} be a partition of the edges into attractive ( E + {\displaystyle E^{+}} ) and repulsive ( E − {\displaystyle E^{-}} ) edges; that is, the edges are signed. The minimum disagreement correlation clustering problem is the following optimization problem: minimize Π ∑ e ∈ E + ∩ δ ( Π ) w e + ∑ e ∈ E − ∖ δ ( Π ) w e . {\displaystyle {\begin{aligned}&{\underset {\Pi }{\operatorname {minimize} }}&&\sum _{e\in E^{+}\cap \delta (\Pi )}w_{e}+\sum _{e\in E^{-}\setminus \delta (\Pi )}w_{e}\;.\end{aligned}}} Here, the set E + ∩ δ ( Π ) {\displaystyle E^{+}\cap \delta (\Pi )} contains the attractive edges whose endpoints are in different components with respect to the clustering Π {\displaystyle \Pi } and the set E − ∖ δ ( Π ) {\displaystyle E^{-}\setminus \delta (\Pi )} contains the repulsive edges whose endpoints are in the same component with respect to the clustering Π {\displaystyle \Pi } . Together these two sets contain all edges that disagree with the clustering Π {\displaystyle \Pi } . Similarly to the minimum disagreement correlation clustering problem, the maximum agreement correlation clustering problem is defined as maximize Π ∑ e ∈ E + ∖ δ ( Π ) w e + ∑ e ∈ E − ∩ δ ( Π ) w e . {\displaystyle {\begin{aligned}&{\underset {\Pi }{\operatorname {maximize} }}&&\sum _{e\in E^{+}\setminus \delta (\Pi )}w_{e}+\sum _{e\in E^{-}\cap \delta (\Pi )}w_{e}\;.\end{aligned}}} Here, the set E + ∖ δ ( Π ) {\displaystyle E^{+}\setminus \delta (\Pi )} contains the attractive edges whose endpoints are in the same component with respect to the clustering Π {\displaystyle \Pi } and the set E − ∩ δ ( Π ) {\displaystyle E^{-}\cap \delta (\Pi )} contains the repulsive edges whose endpoints are in different components with respect to the clustering Π {\displaystyle \Pi } . Together these two sets contain all edges that agree with the clustering Π {\displaystyle \Pi } . Instead of formulating the correlation clustering problem in terms of non-negative edge weights and a partition of the edges into attractive and repulsive edges the problem is also formulated in terms of positive and negative edge costs without partitioning the set of edges explicitly. For given weights w : E → R ≥ 0 {\displaystyle w\colon E\to \mathbb {R} _{\geq 0}} and a given partition E = E + ∪ E − {\displaystyle E=E^{+}\cup E^{-}} of the edges into attractive and repulsive edges, the edge costs can be defined by c e = { w e if e ∈ E + − w e if e ∈ E − {\displaystyle {\begin{aligned}c_{e}={\begin{cases}\;\;w_{e}&{\text{if }}e\in E^{+}\\-w_{e}&{\text{if }}e\in E^{-}\end{cases}}\end{aligned}}} for all e ∈ E {\displaystyle e\in E} . An edge whose endpoints are in different clusters is said to be cut. The set δ ( Π ) {\displaystyle \delta (\Pi )} of all edges that are cut is often called a multicut of G {\displaystyle G} . The minimum cost multicut problem is the problem of finding a clustering Π {\displaystyle \Pi } of G {\displaystyle G} such that the sum of the costs of the edges whose endpoints are in different clusters is minimal: minimize Π ∑ e ∈ δ ( Π ) c e . {\displaystyle {\begin{aligned}&{\underset {\Pi }{\operatorname {minimize} }}&&\sum _{e\in \delta (\Pi )}c_{e}\;.\end{aligned}}} Similar to the minimum cost multicut problem, coalition structure generation in weighted graph games is the problem of finding a clustering such that the sum of the costs of the edges that are not cut is maximal: maximize Π ∑ e ∈ E ∖ δ ( Π ) c e . {\displaystyle {\begin{aligned}&{\underset {\Pi }{\operatorname {maximize} }}&&\sum _{e\in E\setminus \delta (\Pi )}c_{e}\;.\end{aligned}}} This formulation is also known as the clique partitioning problem. It can be shown that all four problems that are formulated above are equivalent. This means that a clustering that is optimal with respect to any of the four objectives is optimal for all of the four objectives. == Algorithms == If the graph admits a clustering with zero disagreements, then deleting all negative edges and computing the connected components of the remaining graph yields an optimal clustering. A necessary and sufficient condition for the existence of such a clustering was given by Davis: no cycle in the graph may contain exactly one negative edge. Bansal et al. discuss the NP-completeness proof and also present both a constant factor approximation algorithm and polynomial-time approximation scheme to find the clusters in this setting. Ailon et al. propose a randomized 3-approximation algorithm for the same problem. CC-Pivot(G=(V,E+,E−)) Pick random pivot i ∈ V Set C = { i } {\displaystyle C=\{i\}} , V'=Ø For all j ∈ V, j ≠ i; If (i,j) ∈ E+ then Add j to C Else (If (i,j) ∈ E−) Add j to V' Let G' be the subgraph induced by V' Return clustering C,CC-Pivot(G') The authors show that the above algorithm is a 3-approximation algorithm for correlation clustering. The best polynomial-time approximation algorithm known at the moment for this problem achieves a ~2.06 approximation by rounding a linear program, as shown by Chawla, Makarychev, Schramm, and Yaroslavtsev. Karpinski and Schudy proved existence of a polynomial time approximation scheme (PTAS) for that problem on complete graphs and fixed number of clusters. == Optimal number of clusters == In 2011, it was shown by Bagon and Galun that the optimization of the correlation clustering functional is closely related to well known discrete optimization methods. In their work they proposed a probabilistic analysis of the underlying implicit model that allows the correlation clustering functional to estimate the

    Read more →
  • Rule-based machine learning

    Rule-based machine learning

    Rule-based machine learning (RBML) is a term in computer science intended to encompass any machine learning method that identifies, learns, or evolves 'rules' to store, manipulate or apply. The defining characteristic of a rule-based machine learner is the identification and utilization of a set of relational rules that collectively represent the knowledge captured by the system. Rule-based machine learning approaches include learning classifier systems, association rule learning, artificial immune systems, and any other method that relies on a set of rules, each covering contextual knowledge. While rule-based machine learning is conceptually a type of rule-based system, it is distinct from traditional rule-based systems, which are often hand-crafted, and other rule-based decision makers. This is because rule-based machine learning applies some form of learning algorithm such as Rough sets theory to identify and minimise the set of features and to automatically identify useful rules, rather than a human needing to apply prior domain knowledge to manually construct rules and curate a rule set. == Rules == Rules typically take the form of an '{IF:THEN} expression', (e.g. {IF 'condition' THEN 'result'}, or as a more specific example, {IF 'red' AND 'octagon' THEN 'stop-sign}). An individual rule is not in itself a model, since the rule is only applicable when its condition is satisfied. Therefore rule-based machine learning methods typically comprise a set of rules, or knowledge base, that collectively make up the prediction model usually known as decision algorithm. Rules can also be interpreted in various ways depending on the domain knowledge, data types(discrete or continuous) and in combinations. == RIPPER == Repeated incremental pruning to produce error reduction (RIPPER) is a propositional rule learner proposed by William W. Cohen as an optimized version of IREP.

    Read more →
  • Data-driven model

    Data-driven model

    Data-driven models are a class of computational models that primarily rely on historical data collected throughout a system's or process' lifetime to establish relationships between input, internal, and output variables. Commonly found in numerous articles and publications, data-driven models have evolved from earlier statistical models, overcoming limitations posed by strict assumptions about probability distributions. These models have gained prominence across various fields, particularly in the era of big data, artificial intelligence, and machine learning, where they offer valuable insights and predictions based on the available data. == Background == These models have evolved from earlier statistical models, which were based on certain assumptions about probability distributions that often proved to be overly restrictive. The emergence of data-driven models in the 1950s and 1960s coincided with the development of digital computers, advancements in artificial intelligence research, and the introduction of new approaches in non-behavioural modelling, such as pattern recognition and automatic classification. == Key Concepts == Data-driven models encompass a wide range of techniques and methodologies that aim to intelligently process and analyse large datasets. Examples include fuzzy logic, fuzzy and rough sets for handling uncertainty, neural networks for approximating functions, global optimization and evolutionary computing, statistical learning theory, and Bayesian methods. These models have found applications in various fields, including economics, customer relations management, financial services, medicine, and the military, among others. Machine learning, a subfield of artificial intelligence, is closely related to data-driven modelling as it also focuses on using historical data to create models that can make predictions and identify patterns. In fact, many data-driven models incorporate machine learning techniques, such as regression, classification, and clustering algorithms, to process and analyse data. In recent years, the concept of data-driven models has gained considerable attention in the field of water resources, with numerous applications, academic courses, and scientific publications using the term as a generalization for models that rely on data rather than physics. This classification has been featured in various publications and has even spurred the development of hybrid models in the past decade. Hybrid models attempt to quantify the degree of physically based information used in hydrological models and determine whether the process of building the model is primarily driven by physics or purely data-based. As a result, data-driven models have become an essential topic of discussion and exploration within water resources management and research. The term "data-driven modelling" (DDM) refers to the overarching paradigm of using historical data in conjunction with advanced computational techniques, including machine learning and artificial intelligence, to create models that can reveal underlying trends, patterns, and, in some cases, make predictions Data-driven models can be built with or without detailed knowledge of the underlying processes governing the system behavior, which makes them particularly useful when such knowledge is missing or fragmented.

    Read more →
  • NOMINATE (scaling method)

    NOMINATE (scaling method)

    NOMINATE (an acronym for nominal three-step estimation) is a multidimensional scaling application developed by US political scientists Keith T. Poole and Howard Rosenthal in the early 1980s to analyze preferential and choice data, such as legislative roll-call voting behavior. In its most well-known application, members of the US Congress are placed on a two-dimensional map, with politicians who are ideologically similar (i.e. who often vote the same) being close together. One of these two dimensions corresponds to the familiar left–right political spectrum (liberal–conservative in the United States). As computing capabilities grew, Poole and Rosenthal developed multiple iterations of their NOMINATE procedure: the original D-NOMINATE method, W-NOMINATE, and most recently DW-NOMINATE (for dynamic, weighted NOMINATE). In 2009, Poole and Rosenthal were the first recipients of the Society for Political Methodology's Best Statistical Software Award for their development of NOMINATE. In 2016, the society awarded Poole its Career Achievement Award, stating that "the modern study of the U.S. Congress would be simply unthinkable without NOMINATE legislative roll call voting scores." == Procedure == The main procedure is an application of multidimensional scaling techniques to political choice data. Though there are important technical differences between these types of NOMINATE scaling procedures, all operate under the same fundamental assumptions. First, that alternative choices can be projected on a basic, low-dimensional (often two-dimensional) Euclidean space. Second, within that space, individuals have utility functions which are bell-shaped (normally distributed), and maximized at their ideal point. Because individuals also have symmetric, single-peaked utility functions which center on their ideal point, ideal points represent individuals' most preferred outcomes. That is, individuals most desire outcomes closest their ideal point, and will choose/vote probabilistically for the closest outcome. Ideal points can be recovered from observing choices, with individuals exhibiting similar preferences placed more closely than those behaving dissimilarly. It is helpful to compare this procedure to producing maps based on driving distances between cities. For example, Los Angeles is about 1,800 miles from St. Louis; St. Louis is about 1,200 miles from Miami; and Miami is about 2,700 miles from Los Angeles. From this (dis)similarities data, any map of these three cities should place Miami far from Los Angeles, with St. Louis somewhere in between (though a bit closer to Miami than Los Angeles). Just as cities like Los Angeles and San Francisco would be clustered on a map, NOMINATE places ideologically similar legislators (e.g., liberal Senators Barbara Boxer (D-Calif.) and Al Franken (D-Minn.)) closer to each other, and farther from dissimilar legislators (e.g., conservative Senator Tom Coburn (R-Okla.)) based on the degree of agreement between their roll call voting records. At the heart of the NOMINATE procedures (and other multidimensional scaling methods, such as Poole's Optimal Classification method) are algorithms they utilize to arrange individuals and choices in low dimensional (usually two-dimensional) space. Thus, NOMINATE scores provide "maps" of legislatures. Using NOMINATE procedures to study congressional roll call voting behavior from the First Congress to the present-day, Poole and Rosenthal published Congress: A Political-Economic History of Roll Call Voting in 1997 and the revised edition Ideology and Congress in 2007. In 2009, Poole and Rosenthal were named the first recipients of the Society for Political Methodology's Best Statistical Software Award for their development of NOMINATE, a recognition conferred to "individual(s) for developing statistical software that makes a significant research contribution". In 2016, Keith T. Poole was awarded the Society for Political Methodology's Career Achievement Award. The citation for this award reads, in part, "One can say perfectly correctly, and without any hyperbole: the modern study of the U.S. Congress would be simply unthinkable without NOMINATE legislative roll call voting scores. NOMINATE has produced data that entire bodies of our discipline—and many in the press—have relied on to understand the U.S. Congress." == Dimensions == Poole and Rosenthal demonstrate that—despite the many complexities of congressional representation and politics—roll call voting in both the House and the Senate can be organized and explained by no more than two dimensions throughout the sweep of American history. The first dimension (horizontal or x-axis) is the familiar left-right (or liberal-conservative) spectrum on economic matters. The second dimension (vertical or y-axis) picks up attitudes on cross-cutting, salient issues of the day (which include or have included slavery, bimetallism, civil rights, regional, and social/lifestyle issues). Rosenthal and Poole have initially argued that the first dimension refers to socio-economic matters and the second dimension to race-relations. However, the often confusing and residual nature of the second dimension has led to the second dimension being largely ignored by other researchers. For the most part, congressional voting is uni-dimensional, with most of the variation in voting patterns explained by placement along the liberal-conservative first dimension. While the first dimension of the DW-NOMINATE score is able to predict results at 83% accuracy, the addition of the second dimension only increases accuracy to 85%. Furthermore, the second dimension only provided a significant increase in accuracy for Congresses 1-99. As late as the 1990s, the second dimension was able to measure partisan splits in abortion and gun rights issues. However, a 2017 analysis found that since 1987, the votes of the US Congress had best fit a one-dimensional model, suggesting increasing party polarization after 1987. == Interpretation of nominate scores == For illustrative purposes, consider the following plots which use W-NOMINATE scores to scale members of Congress and uses the probabilistic voting model (in which legislators farther from the "cutting line" between "yea" and "nay" outcomes become more likely to vote in the predicted manner) to illustrate some major Congressional votes in the 1990s. Some of these votes, like the House's vote on President Clinton's welfare reform package (the Personal Responsibility and Work Opportunity Act of 1996) are best modeled through the use of the first (economic liberal-conservative) dimension. On the welfare reform vote, nearly all Republicans joined the moderate-conservative bloc of House Democrats in voting for the bill, while opposition was virtually confined to the most liberal Democrats in the House. The errors (those representatives on the "wrong" side of the cutting line which separates predicted "yeas" and predicted "nays") are generally close to the cutting line, which is what we would expect. A legislator directly on the cutting line is indifferent between voting "yea" and "nay" on the measure. All members are shown on the left panel of the plot, while only errors are shown on the right panel: Economic ideology also dominates the Senate vote on the Balanced Budget Amendment of 1995: On other votes, however, a second dimension (which has recently come to represent attitudes on cultural and lifestyle issues) is important. For example, roll call votes on gun control routinely split party coalitions, with socially conservative "blue dog" Democrats joining most Republicans in opposing additional regulation and socially liberal Republicans joining most Democrats in supporting gun control. The addition of the second dimension accounts for these inter-party differences, and the cutting line is more horizontal than vertical (meaning the cleavage is found on the second dimension rather than the first dimension on these votes) This pattern was evident in the 1991 House vote to require waiting periods on handguns: == Political ideology == DW-NOMINATE scores have been used widely to describe the political ideology of political actors, political parties and political institutions. For instance, a score in the first dimension that is close to either pole means that such score is located at one of the extremes in the liberal-conservative scale. So, a score closer to 1 is described as conservative whereas a score closer to −1 can be described as liberal. Finally, a score at zero or close to zero is described as moderate. == Political polarization == Poole and Rosenthal (beginning with their 1984 article "The Polarization of American Politics") have also used NOMINATE data to show that, since the 1970s, party delegations in Congress have become ideologically homogeneous and distant from one another (a phenomenon known as "polarization"). Using DW-NOMINATE scores (which permit direct comparisons between members of different Congress

    Read more →
  • NOMINATE (scaling method)

    NOMINATE (scaling method)

    NOMINATE (an acronym for nominal three-step estimation) is a multidimensional scaling application developed by US political scientists Keith T. Poole and Howard Rosenthal in the early 1980s to analyze preferential and choice data, such as legislative roll-call voting behavior. In its most well-known application, members of the US Congress are placed on a two-dimensional map, with politicians who are ideologically similar (i.e. who often vote the same) being close together. One of these two dimensions corresponds to the familiar left–right political spectrum (liberal–conservative in the United States). As computing capabilities grew, Poole and Rosenthal developed multiple iterations of their NOMINATE procedure: the original D-NOMINATE method, W-NOMINATE, and most recently DW-NOMINATE (for dynamic, weighted NOMINATE). In 2009, Poole and Rosenthal were the first recipients of the Society for Political Methodology's Best Statistical Software Award for their development of NOMINATE. In 2016, the society awarded Poole its Career Achievement Award, stating that "the modern study of the U.S. Congress would be simply unthinkable without NOMINATE legislative roll call voting scores." == Procedure == The main procedure is an application of multidimensional scaling techniques to political choice data. Though there are important technical differences between these types of NOMINATE scaling procedures, all operate under the same fundamental assumptions. First, that alternative choices can be projected on a basic, low-dimensional (often two-dimensional) Euclidean space. Second, within that space, individuals have utility functions which are bell-shaped (normally distributed), and maximized at their ideal point. Because individuals also have symmetric, single-peaked utility functions which center on their ideal point, ideal points represent individuals' most preferred outcomes. That is, individuals most desire outcomes closest their ideal point, and will choose/vote probabilistically for the closest outcome. Ideal points can be recovered from observing choices, with individuals exhibiting similar preferences placed more closely than those behaving dissimilarly. It is helpful to compare this procedure to producing maps based on driving distances between cities. For example, Los Angeles is about 1,800 miles from St. Louis; St. Louis is about 1,200 miles from Miami; and Miami is about 2,700 miles from Los Angeles. From this (dis)similarities data, any map of these three cities should place Miami far from Los Angeles, with St. Louis somewhere in between (though a bit closer to Miami than Los Angeles). Just as cities like Los Angeles and San Francisco would be clustered on a map, NOMINATE places ideologically similar legislators (e.g., liberal Senators Barbara Boxer (D-Calif.) and Al Franken (D-Minn.)) closer to each other, and farther from dissimilar legislators (e.g., conservative Senator Tom Coburn (R-Okla.)) based on the degree of agreement between their roll call voting records. At the heart of the NOMINATE procedures (and other multidimensional scaling methods, such as Poole's Optimal Classification method) are algorithms they utilize to arrange individuals and choices in low dimensional (usually two-dimensional) space. Thus, NOMINATE scores provide "maps" of legislatures. Using NOMINATE procedures to study congressional roll call voting behavior from the First Congress to the present-day, Poole and Rosenthal published Congress: A Political-Economic History of Roll Call Voting in 1997 and the revised edition Ideology and Congress in 2007. In 2009, Poole and Rosenthal were named the first recipients of the Society for Political Methodology's Best Statistical Software Award for their development of NOMINATE, a recognition conferred to "individual(s) for developing statistical software that makes a significant research contribution". In 2016, Keith T. Poole was awarded the Society for Political Methodology's Career Achievement Award. The citation for this award reads, in part, "One can say perfectly correctly, and without any hyperbole: the modern study of the U.S. Congress would be simply unthinkable without NOMINATE legislative roll call voting scores. NOMINATE has produced data that entire bodies of our discipline—and many in the press—have relied on to understand the U.S. Congress." == Dimensions == Poole and Rosenthal demonstrate that—despite the many complexities of congressional representation and politics—roll call voting in both the House and the Senate can be organized and explained by no more than two dimensions throughout the sweep of American history. The first dimension (horizontal or x-axis) is the familiar left-right (or liberal-conservative) spectrum on economic matters. The second dimension (vertical or y-axis) picks up attitudes on cross-cutting, salient issues of the day (which include or have included slavery, bimetallism, civil rights, regional, and social/lifestyle issues). Rosenthal and Poole have initially argued that the first dimension refers to socio-economic matters and the second dimension to race-relations. However, the often confusing and residual nature of the second dimension has led to the second dimension being largely ignored by other researchers. For the most part, congressional voting is uni-dimensional, with most of the variation in voting patterns explained by placement along the liberal-conservative first dimension. While the first dimension of the DW-NOMINATE score is able to predict results at 83% accuracy, the addition of the second dimension only increases accuracy to 85%. Furthermore, the second dimension only provided a significant increase in accuracy for Congresses 1-99. As late as the 1990s, the second dimension was able to measure partisan splits in abortion and gun rights issues. However, a 2017 analysis found that since 1987, the votes of the US Congress had best fit a one-dimensional model, suggesting increasing party polarization after 1987. == Interpretation of nominate scores == For illustrative purposes, consider the following plots which use W-NOMINATE scores to scale members of Congress and uses the probabilistic voting model (in which legislators farther from the "cutting line" between "yea" and "nay" outcomes become more likely to vote in the predicted manner) to illustrate some major Congressional votes in the 1990s. Some of these votes, like the House's vote on President Clinton's welfare reform package (the Personal Responsibility and Work Opportunity Act of 1996) are best modeled through the use of the first (economic liberal-conservative) dimension. On the welfare reform vote, nearly all Republicans joined the moderate-conservative bloc of House Democrats in voting for the bill, while opposition was virtually confined to the most liberal Democrats in the House. The errors (those representatives on the "wrong" side of the cutting line which separates predicted "yeas" and predicted "nays") are generally close to the cutting line, which is what we would expect. A legislator directly on the cutting line is indifferent between voting "yea" and "nay" on the measure. All members are shown on the left panel of the plot, while only errors are shown on the right panel: Economic ideology also dominates the Senate vote on the Balanced Budget Amendment of 1995: On other votes, however, a second dimension (which has recently come to represent attitudes on cultural and lifestyle issues) is important. For example, roll call votes on gun control routinely split party coalitions, with socially conservative "blue dog" Democrats joining most Republicans in opposing additional regulation and socially liberal Republicans joining most Democrats in supporting gun control. The addition of the second dimension accounts for these inter-party differences, and the cutting line is more horizontal than vertical (meaning the cleavage is found on the second dimension rather than the first dimension on these votes) This pattern was evident in the 1991 House vote to require waiting periods on handguns: == Political ideology == DW-NOMINATE scores have been used widely to describe the political ideology of political actors, political parties and political institutions. For instance, a score in the first dimension that is close to either pole means that such score is located at one of the extremes in the liberal-conservative scale. So, a score closer to 1 is described as conservative whereas a score closer to −1 can be described as liberal. Finally, a score at zero or close to zero is described as moderate. == Political polarization == Poole and Rosenthal (beginning with their 1984 article "The Polarization of American Politics") have also used NOMINATE data to show that, since the 1970s, party delegations in Congress have become ideologically homogeneous and distant from one another (a phenomenon known as "polarization"). Using DW-NOMINATE scores (which permit direct comparisons between members of different Congress

    Read more →
  • Spiking neural network

    Spiking neural network

    Spiking neural networks (SNNs) are artificial neural networks (ANN) that mimic natural neural networks. These models leverage timing of discrete spikes as the main information carrier. In addition to neuronal and synaptic state, SNNs incorporate the concept of time into their operating model. The idea is that neurons in the SNN do not transmit information at each propagation cycle (as it happens with typical multi-layer perceptron networks), but rather transmit information only when a membrane potential—an intrinsic quality of the neuron related to its membrane electrical charge—reaches a specific value, called the threshold. When the membrane potential reaches the threshold, the neuron fires, and generates a signal that travels to other neurons which, in turn, increase or decrease their potentials in response to this signal. A neuron model that fires at the moment of threshold crossing is also called a spiking neuron model. While spike rates can be considered the analogue of the variable output of a traditional ANN, neurobiology research indicated that high speed processing cannot be performed solely through a rate-based scheme. For example humans can perform an image recognition task requiring no more than 10ms of processing time per neuron through the successive layers (going from the retina to the temporal lobe). This time window is too short for rate-based encoding. The precise spike timings in a small set of spiking neurons also has a higher information coding capacity compared with a rate-based approach. The most prominent spiking neuron model is the leaky integrate-and-fire model. In that model, the momentary activation level (modeled as a differential equation) is normally considered to be the neuron's state, with incoming spikes pushing this value higher or lower, until the state eventually either decays or—if the firing threshold is reached—the neuron fires. After firing, the state variable is reset to a lower value. Various decoding methods exist for interpreting the outgoing spike train as a real-value number, relying on either the frequency of spikes (rate-code), the time-to-first-spike after stimulation, or the interval between spikes. == History == Many multi-layer artificial neural networks are fully connected, receiving input from every neuron in the previous layer and signalling every neuron in the subsequent layer. Although these networks have achieved breakthroughs, they do not match biological networks and do not mimic neurons. The biology-inspired Hodgkin–Huxley model of a spiking neuron was proposed in 1952. This model described how action potentials are initiated and propagated. Communication between neurons, which requires the exchange of chemical neurotransmitters in the synaptic gap, is described in models such as the integrate-and-fire model, FitzHugh–Nagumo model (1961–1962), and Hindmarsh–Rose model (1984). The leaky integrate-and-fire model (or a derivative) is commonly used as it is easier to compute than Hodgkin–Huxley. While the notion of an artificial spiking neural network became popular only in the twenty-first century, studies between 1980 and 1995 supported the concept. The first models of this type of ANN appeared to simulate non-algorithmic intelligent information processing systems. However, the notion of the spiking neural network as a mathematical model was first worked on in the early 1970s. As of 2019 SNNs lagged behind ANNs in accuracy, but the gap is decreasing, and has vanished on some tasks. == Underpinnings == Information in the brain is represented as action potentials (neuron spikes), which may group into spike trains or coordinated waves. A fundamental question of neuroscience is to determine whether neurons communicate by a rate or temporal code. Temporal coding implies that a single spiking neuron can replace hundreds of hidden units on a conventional neural net. SNNs define a neuron's current state as its potential (possibly modeled as a differential equation). An input pulse causes the potential to rise and then gradually decline. Encoding schemes can interpret these pulse sequences as a number, considering pulse frequency and pulse interval. Using the precise time of pulse occurrence, a neural network can consider more information and offer better computing properties. SNNs compute in the continuous domain. Such neurons test for activation only when their potentials reach a certain value. When a neuron is activated, it produces a signal that is passed to connected neurons, accordingly raising or lowering their potentials. The SNN approach produces a continuous output instead of the binary output of traditional ANNs. Pulse trains are not easily interpretable, hence the need for encoding schemes. However, a pulse train representation may be more suited for processing spatiotemporal data (or real-world sensory data classification). SNNs connect neurons only to nearby neurons so that they process input blocks separately (similar to CNN using filters). They consider time by encoding information as pulse trains so as not to lose information. This avoids the complexity of a recurrent neural network (RNN). Impulse neurons are more powerful computational units than traditional artificial neurons. SNNs are theoretically more powerful than so called "second-generation networks" defined as ANNs "based on computational units that apply activation function with a continuous set of possible output values to a weighted sum (or polynomial) of the inputs"; however, SNN training issues and hardware requirements limit their use. Although unsupervised biologically inspired learning methods are available such as Hebbian learning and STDP, no effective supervised training method is suitable for SNNs that can provide better performance than second-generation networks. Spike-based activation of SNNs is not differentiable, thus gradient descent-based backpropagation (BP) is not available. SNNs have much larger computational costs for simulating realistic neural models than traditional ANNs. Pulse-coupled neural networks (PCNN) are often confused with SNNs. A PCNN can be seen as a kind of SNN. Researchers are actively working on various topics. The first concerns differentiability. The expressions for both the forward- and backward-learning methods contain the derivative of the neural activation function which is not differentiable because a neuron's output is either 1 when it spikes, and 0 otherwise. This all-or-nothing behavior disrupts gradients and makes these neurons unsuitable for gradient-based optimization. Approaches to resolving it include: resorting to entirely biologically inspired local learning rules for the hidden units translating conventionally trained "rate-based" NNs to SNNs smoothing the network model to be continuously differentiable defining an SG (Surrogate Gradient) as a continuous relaxation of the real gradients The second concerns the optimization algorithm. Standard BP can be expensive in terms of computation, memory, and communication and may be poorly suited to the hardware that implements it (e.g., a computer, brain, or neuromorphic device). Incorporating additional neuron dynamics such as Spike Frequency Adaptation (SFA) is a notable advance, enhancing efficiency and computational power. These neurons sit between biological complexity and computational complexity. Originating from biological insights, SFA offers significant computational benefits by reducing power usage, especially in cases of repetitive or intense stimuli. This adaptation improves signal/noise clarity and introduces an elementary short-term memory at the neuron level, which in turn, improves accuracy and efficiency. This was mostly achieved using compartmental neuron models. The simpler versions are of neuron models with adaptive thresholds, are an indirect way of achieving SFA. It equips SNNs with improved learning capabilities, even with constrained synaptic plasticity, and elevates computational efficiency. This feature lessens the demand on network layers by decreasing the need for spike processing, thus lowering computational load and memory access time—essential aspects of neural computation. Moreover, SNNs utilizing neurons capable of SFA achieve levels of accuracy that rival those of conventional ANNs, while also requiring fewer neurons for comparable tasks. This efficiency streamlines the computational workflow and conserves space and energy, while maintaining technical integrity. High-performance deep spiking neural networks can operate with 0.3 spikes per neuron. == Applications == SNNs can in principle be applied to the same applications as traditional ANNs. In addition, SNNs can model the central nervous system of biological organisms, such as an insect seeking food without prior knowledge of the environment. Due to their relative realism, they can be used to study biological neural circuits. Starting with a hypothesis about the topology of a biological neuronal circuit and its functi

    Read more →
  • Open-source robotics

    Open-source robotics

    Open-source robotics is a branch of robotics where robots are developed with open-source hardware and free and open-source software, publicly sharing blueprints, schematics, and source code. It is thus closely related to the open design movement, the maker movement and open science. == Requirements == Open source robotics means that information about the hardware is easily discerned, so that others can easily rebuild it. In turn, this requires design to use only easily available standard subcomponents and tools, and for the build process to be documented in detail including a bill of materials and detailed ('Ikea style') step-by-step building and testing instructions. (A CAD file alone is not sufficient, as it does not show the steps for performing or testing the build). These requirements are standard to open source hardware in general, and are formalised by various licences, certifications, especially those defined by the peer-reviewed journals Journal of Open Hardware and HardwareX. Licensing requirements for software are the same as for any open source software. But in addition, for software components to be of practical use in real robot systems, they need to be compatible with other software, usually as defined by some robotics middleware community standard. == Hardware systems == Applications to date include: Robot arms, e.g. PARA or Thor Wheeled mobile robots. e.g. OpenScout Four-legged robots such as the Open Dynamic Robot Initiative UAV quadcopters (drones) such as Agilicious Humanoid robots, e.g. iCub, Berkeley Humanoid Lite Self-driving cars, e.g. OpenPodcar (→ Personal rapid transit) Submersible robots, eg. OpenFish Laboratory robotics such as chemical liquid handling Vertical farming Swarm robots, e.g. HeRoSwarm Domestic tasks: vacuum cleaning, floor washing and grass mowing Robot sports including robot combat and autonomous racing Education == Hardware subcomponents == Most open source hardware definitions allow non-open subcomponents to be used in modular design, as long as they are easily available. However many designs try to push openness down into as many subcomponents as possible, with the aim of ultimately reaching fully open designs. Open hardware manual-drive vehicles and their subcomponents, such as from Open Source Ecology, are often used as starting points and extended with automation systems. Open subcomponents can include open-source computing hardware as subcomponents, such as Arduino and RISC-V, as well as open source motors and drivers such as the Open Source Motor Controller and ODrive. Open hardware robotics interface boards can simplify interfacing between middleware software and physical hardware. == Software subcomponents == === Middleware === Robotics middleware is software which links multiple other software components together. In robotics, this specifically means real-time communication systems with standardized message passing protocols. The predominant open source middleware is ROS2, the robot operating system, now as version 2. Other alternatives include ROS1, YARP — used in the iCub, URBI, and Orca. Open source middleware is usually run on an open source operating system, especially the Ubuntu distribution of Linux. === Driver software === Most robot sensors and actuators require software drivers. There is little standardization of open source software at this level, because each hardware device is different. Creating open drivers for closed hardware is difficult as it requires both low level programming and reverse engineering. === Simulation software === Open source robotics simulators include Gazebo, MuJoCo and Webots. Open source 3D game engines such as Godot are also sometimes used as simulators, when equipped with suitable middleware interfaces. === Automation software === At the level of AI, many standard algorithms have open source software implementations, mostly in ROS2. Major components include: Machine vision systems such as the YOLO object detector. 3D photogrammetry Navigation including SLAM and planning such as nav2 Arm inverse kinematics such as moveIt2 == Community == The first signs of the increasing popularity of building and sharing robot designs were found with the maker culture community. What began with small competitions for remote operated vehicles (e.g. Robot combat), soon developed to the building of autonomous telepresence robots such as Sparky and then true robots (being able to take decisions themselves) as the Open Automaton Project. Several commercial companies now also produce kits for making simple robots. The community has adopted open source hardware licenses, certifications, and peer-reviewed publications, which check that source has been made correctly and permanently available under community definitions, and which validate that this has been done. These processes have become critically important due to many historical projects claiming to be open source but them reverting on the promise due to commercialisation or other pressures. As with other forms of open source hardware, the community continues to debate precise criteria for 'ease of build'. A common standard is that designs should be buildable by a technical university student, in a few days, using typical fablab tools, but definitions of all of these subterms can also be debated. Compared to other forms of open source hardware, open source robotics typically includes a large software element, so involves software as well as hardware engineers. Open source concepts are more established in open source software than hardware, so robotics is a field in which those concepts can be shared and transferred from software to hardware. While the community in open source robotics is multi-faceted with a wide range of backgrounds, a sizable sub-community uses the ROS middleware and meets at the ROSCon conferences to discuss development of ROS itself and automation components built on it.

    Read more →
  • Cross-entropy

    Cross-entropy

    In information theory, the cross-entropy between two probability distributions p {\displaystyle p} and q {\displaystyle q} , over the same underlying set of events, measures the average number of bits needed to identify an event drawn from the set when the coding scheme used for the set is optimized for an estimated probability distribution q {\displaystyle q} , rather than the true distribution p {\displaystyle p} . == Definition == The cross-entropy of the distribution q {\displaystyle q} relative to a distribution p {\displaystyle p} over a given set is defined as follows: H ( p , q ) = − E p ⁡ [ log ⁡ q ] , {\displaystyle H(p,q)=-\operatorname {E} _{p}[\log q],} where E p ⁡ [ ⋅ ] {\displaystyle \operatorname {E} _{p}[\cdot ]} is the expected value operator with respect to the distribution p {\displaystyle p} . The definition may be formulated using the Kullback–Leibler divergence D K L ( p ∥ q ) {\displaystyle D_{\mathrm {KL} }(p\parallel q)} , divergence of p {\displaystyle p} from q {\displaystyle q} (also known as the relative entropy of p {\displaystyle p} with respect to q {\displaystyle q} ). H ( p , q ) = H ( p ) + D K L ( p ∥ q ) , {\displaystyle H(p,q)=H(p)+D_{\mathrm {KL} }(p\parallel q),} where H ( p ) {\displaystyle H(p)} is the entropy of p {\displaystyle p} . For discrete probability distributions p {\displaystyle p} and q {\displaystyle q} with the same support X {\displaystyle {\mathcal {X}}} , this means The situation for continuous distributions is analogous. We have to assume that p {\displaystyle p} and q {\displaystyle q} are absolutely continuous with respect to some reference measure r {\displaystyle r} (usually r {\displaystyle r} is a Lebesgue measure on a Borel σ-algebra). Let P {\displaystyle P} and Q {\displaystyle Q} be probability density functions of p {\displaystyle p} and q {\displaystyle q} with respect to r {\displaystyle r} . Then − ∫ X P ( x ) log ⁡ Q ( x ) d x = E p ⁡ [ − log ⁡ Q ] , {\displaystyle -\int _{\mathcal {X}}P(x)\,\log Q(x)\,\mathrm {d} x=\operatorname {E} _{p}[-\log Q],} and therefore NB: The notation H ( p , q ) {\displaystyle H(p,q)} is also used for a different concept, the joint entropy of p {\displaystyle p} and q {\displaystyle q} . == Motivation == In information theory, the Kraft–McMillan theorem establishes that any directly decodable coding scheme for coding a message to identify one value x i {\displaystyle x_{i}} out of a set of possibilities { x 1 , … , x n } {\displaystyle \{x_{1},\ldots ,x_{n}\}} can be seen as representing an implicit probability distribution q ( x i ) = ( 1 2 ) ℓ i {\displaystyle q(x_{i})=\left({\frac {1}{2}}\right)^{\ell _{i}}} over { x 1 , … , x n } {\displaystyle \{x_{1},\ldots ,x_{n}\}} , where ℓ i {\displaystyle \ell _{i}} is the length of the code for x i {\displaystyle x_{i}} in bits. Therefore, cross-entropy can be interpreted as the expected message-length per datum when a wrong distribution q {\displaystyle q} is assumed while the data actually follows a distribution p {\displaystyle p} . That is why the expectation is taken over the true probability distribution p {\displaystyle p} and not q . {\displaystyle q.} Indeed the expected message-length under the true distribution p {\displaystyle p} is E p ⁡ [ ℓ ] = − E p ⁡ [ ln ⁡ q ( x ) ln ⁡ ( 2 ) ] = − E p ⁡ [ log 2 ⁡ q ( x ) ] = − ∑ x i p ( x i ) log 2 ⁡ q ( x i ) = − ∑ x p ( x ) log 2 ⁡ q ( x ) = H ( p , q ) . {\displaystyle {\begin{aligned}\operatorname {E} _{p}[\ell ]&=-\operatorname {E} _{p}\left[{\frac {\ln {q(x)}}{\ln(2)}}\right]\\[1ex]&=-\operatorname {E} _{p}\left[\log _{2}{q(x)}\right]\\[1ex]&=-\sum _{x_{i}}p(x_{i})\,\log _{2}q(x_{i})\\[1ex]&=-\sum _{x}p(x)\,\log _{2}q(x)=H(p,q).\end{aligned}}} == Estimation == There are many situations where cross-entropy needs to be measured but the distribution of p {\displaystyle p} is unknown. An example is language modeling, where a model is created based on a training set T {\displaystyle T} , and then its cross-entropy is measured on a test set to assess how accurate the model is in predicting the test data. In this example, p {\displaystyle p} is the true distribution of words in any corpus, and q {\displaystyle q} is the distribution of words as predicted by the model. Since the true distribution is unknown, cross-entropy cannot be directly calculated. In these cases, an estimate of cross-entropy is calculated using the following formula: H ( T , q ) = − ∑ i = 1 N 1 N log 2 ⁡ q ( x i ) {\displaystyle H(T,q)=-\sum _{i=1}^{N}{\frac {1}{N}}\log _{2}q(x_{i})} where N {\displaystyle N} is the size of the test set, and q ( x ) {\displaystyle q(x)} is the probability of event x {\displaystyle x} estimated from the training set. In other words, q ( x i ) {\displaystyle q(x_{i})} is the probability estimate of the model that the i-th word of the text is x i {\displaystyle x_{i}} . The sum is averaged over the N {\displaystyle N} words of the test. This is a Monte Carlo estimate of the true cross-entropy, where the test set is treated as samples from p ( x ) {\displaystyle p(x)} . == Relation to maximum likelihood == The cross entropy arises in classification problems when introducing a logarithm in the guise of the log-likelihood function. This section concerns the estimation of the probabilities of different discrete outcomes. To this end, denote a parametrized family of distributions by q θ {\displaystyle q_{\theta }} , with θ {\displaystyle \theta } subject to the optimization effort. Consider a given finite sequence of N {\displaystyle N} values x i {\displaystyle x_{i}} from a training set, obtained from conditionally independent sampling. The likelihood assigned to any considered parameter θ {\displaystyle \theta } of the model is then given by the product over all probabilities q θ ( X = x i ) {\displaystyle q_{\theta }(X=x_{i})} . Repeated occurrences are possible, leading to equal factors in the product. If the count of occurrences of the value equal to x {\displaystyle x} is denoted by # x {\displaystyle \#x} , then the frequency of that value equals # x / N {\displaystyle \#x/N} . If p ( X = x ) {\displaystyle p(X=x)} is the underlying probability distribution, for large N {\displaystyle N} we expect p ( X = x ) ≈ # x / N {\displaystyle p(X=x)\approx \#x/N} , by the law of large numbers. Writing our likelihood function as the product of observations from the distribution q θ {\displaystyle q_{\theta }} : L ( θ ; x ) = ∏ i q θ ( X = x i ) = ∏ x q θ ( X = x ) # x ≈ ∏ x q θ ( X = x ) N ⋅ p ( X = x ) = exp ⁡ log ⁡ [ ∏ x q θ ( X = x ) N ⋅ p ( X = x ) ] = exp ⁡ ( ∑ x N ⋅ p ( X = x ) log ⁡ q θ ( X = x ) ) , {\displaystyle {\begin{aligned}{\mathcal {L}}(\theta ;{\mathbf {x} })&=\prod _{i}q_{\theta }(X=x_{i})=\prod _{x}q_{\theta }(X=x)^{\#x}\\&\approx \prod _{x}q_{\theta }(X=x)^{N\cdot p(X=x)}=\exp \log \left[\prod _{x}q_{\theta }(X=x)^{N\cdot p(X=x)}\right]\\&=\exp \left(\sum _{x}N\cdot p(X=x)\log q_{\theta }(X=x)^{}\right),\end{aligned}}} where we have used the calculation rules for the logarithm in the final line. Notice how the exponent contains a − H ( p , q θ ) {\displaystyle -H(p,q_{\theta })} term. Taking the logarithm of both sides gives: log ⁡ L ( θ ; x ) = − N ⋅ H ( p , q θ ) . {\displaystyle \log {\mathcal {L}}(\theta ;{\mathbf {x} })=-N\cdot H(p,q_{\theta }).} Since the logarithm is a monotonically increasing function, the maximizing value of θ {\displaystyle \theta } is unaffected by this final step. Similarly, the maximizing value of θ {\displaystyle \theta } is unaffected by the factor of N {\displaystyle N} . So we observe that the likelihood maximization amounts to minimization of the cross-entropy. == Cross-entropy minimization == Cross-entropy minimization is frequently used in optimization and rare-event probability estimation. When comparing a distribution q {\displaystyle q} against a fixed reference distribution p {\displaystyle p} , cross-entropy and KL divergence are identical up to an additive constant (since p {\displaystyle p} is fixed): According to the Gibbs' inequality, both take on their minimal values when p = q {\displaystyle p=q} , which is 0 {\displaystyle 0} for KL divergence, and H ( p ) {\displaystyle \mathrm {H} (p)} for cross-entropy. In the engineering literature, the principle of minimizing KL divergence (Kullback's "Principle of Minimum Discrimination Information") is often called the Principle of Minimum Cross-Entropy (MCE), or Minxent. However, as discussed in the article Kullback–Leibler divergence, sometimes the distribution q {\displaystyle q} is the fixed prior reference distribution, and the distribution p {\displaystyle p} is optimized to be as close to q {\displaystyle q} as possible, subject to some constraint. In this case the two minimizations are not equivalent. This has led to some ambiguity in the literature, with some authors attempting to resolve the inconsistency by restating cross-entropy to be D K L ( p ∥ q ) {\displaystyle D_{\mathrm {KL} }(p\parallel q)} , rather than H (

    Read more →
  • Multiple discriminant analysis

    Multiple discriminant analysis

    Multiple Discriminant Analysis (MDA) is a multivariate dimensionality reduction technique. It has been used to predict signals as diverse as neural memory traces and corporate failure. MDA is not directly used to perform classification. It merely supports classification by yielding a compressed signal amenable to classification. The method described in Duda et al. (2001) §3.8.3 projects the multivariate signal down to an M−1 dimensional space where M is the number of categories. MDA is useful because most classifiers are strongly affected by the curse of dimensionality. In other words, when signals are represented in very-high-dimensional spaces, the classifier's performance is catastrophically impaired by the overfitting problem. This problem is reduced by compressing the signal down to a lower-dimensional space as MDA does. MDA has been used to reveal neural codes.

    Read more →