AI Chat Emochi

AI Chat Emochi — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Distribution management system

  A distribution management system (DMS) is a collection of applications designed to monitor and control the electric power distribution networks efficiently and reliably. It acts as a decision support system to assist the control room and field operating personnel with the monitoring and control of the electric distribution system. Improving the reliability and quality of service in terms of reducing power outages, minimizing outage time, maintaining acceptable frequency and voltage levels are the key deliverables of a DMS. Given the complexity of distribution grids, such systems may involve communication and coordination across multiple components. For example, the control of active loads may require a complex chain of communication through different components as described in US patent 11747849B2 In recent years, utilization of electrical energy increased exponentially and customer requirement and quality definitions of power were changed enormously. As electric energy became an essential part of daily life, its optimal usage and reliability became important. Real-time network view and dynamic decisions have become instrumental for optimizing resources and managing demands, leading to the need for distribution management systems in large-scale electrical networks. == Overview == Most distribution utilities have been comprehensively using IT solutions through their Outage Management System (OMS) that makes use of other systems like Customer Information System (CIS), Geographical Information System (GIS) and Interactive Voice Response System (IVRS). An outage management system has a network component/connectivity model of the distribution system. By combining the locations of outage calls from customers with knowledge of the locations of the protection devices (such as circuit breakers) on the network, a rule engine is used to predict the locations of outages. Based on this, restoration activities are charted out and the crew is dispatched for the same. In parallel with this, distribution utilities began to roll out Supervisory Control and Data Acquisition (SCADA) systems, initially only at their higher voltage substations. Over time, use of SCADA has progressively extended downwards to sites at lower voltage levels. DMSs access real-time data and provide all information on a single console at the control centre in an integrated manner. Their development varied across different geographic territories. In the US, for example, DMSs typically grew by taking Outage Management Systems to the next level, automating the complete sequences and providing an end to end, integrated view of the entire distribution spectrum. In the UK, by contrast, the much denser and more meshed network topologies, combined with stronger Health & Safety regulation, had led to early centralisation of high-voltage switching operations, initially using paper records and schematic diagrams printed onto large wallboards which were 'dressed' with magnetic symbols to show the current running states. There, DMSs grew initially from SCADA systems as these were expanded to allow these centralised control and safety management procedures to be managed electronically. These DMSs required even more detailed component/connectivity models and schematics than those needed by early OMSs as every possible isolation and earthing point on the networks had to be included. In territories such as the UK, therefore, the network component/connectivity models were usually developed in the DMS first, whereas in the USA these were generally built in the GIS. The typical data flow in a DMS has the SCADA system, the Information Storage & Retrieval (ISR) system, Communication (COM) Servers, Front-End Processors (FEPs) & Field Remote Terminal Units (FRTUs). == Why DMS? == Reduce the duration of outages Improve the speed and accuracy of outage predictions. Reduce crew patrol and drive times through improved outage locating. Improve the operational efficiency Determine the crew resources necessary to achieve restoration objectives. Effectively utilize resources between operating regions. Determine when best to schedule mutual aid crews. Increased customer satisfaction A DMS incorporates IVR and other mobile technologies, through which there is an improved outage communications for customer calls. Provide customers with more accurate estimated restoration times. Improve service reliability by tracking all customers affected by an outage, determining electrical configurations of every device on every feeder, and compiling details about each restoration process. == DMS Functions == In order to support proper decision making and O&M activities, DMS solutions should support the following functions: Network visualization & support tools Applications for Analytical & Remedial Action Utility Planning Tools System Protection Schemes The various sub functions of the same, carried out by the DMS are listed below:- === Network Connectivity Analysis (NCA) === Distribution network usually covers over a large area and catering power to different customers at different voltage levels. So locating required sources and loads on a larger GIS/Operator interface is often very difficult. Panning & zooming provided with normal SCADA system GUI does not cover the exact operational requirement. Network connectivity analysis is an operator specific functionality which helps the operator to identify or locate the preferred network or component very easily. NCA does the required analyses and provides display of the feed point of various network loads. Based on the status of all the switching devices such as circuit breaker (CB), Ring Main Unit (RMU) and/or isolators that affect the topology of the network modeled, the prevailing network topology is determined. The NCA further assists the operator to know operating state of the distribution network indicating radial mode, loops and parallels in the network. === Switching Schedule & Safety Management === In territories such as the UK a core function of a DMS has always been to support safe switching and work on the networks. Control engineers prepare switching schedules to isolate and make safe a section of network before work is carried out, and the DMS validates these schedules using its network model. Switching schedules can combine telecontrolled and manual (on-site) switching operations. When the required section has been made safe, the DMS allows a Permit To Work (PTW) document to be issued. After its cancellation when the work has been finished, the switching schedule then facilitates restoration of the normal running arrangements. Switching components can also be tagged to reflect any Operational Restrictions that are in force. The network component/connectivity model, and associated diagrams, must always be kept absolutely up to date. The switching schedule facility therefore also allows 'patches' to the network model to be applied to the live version at the appropriate stage(s) of the jobs. The term 'patch' is derived from the method previously used to maintain the wallboard diagrams. === State Estimation (SE) === The state estimator is an integral part of the overall monitoring and control systems for transmission networks. It is mainly aimed at providing a reliable estimate of the system voltages. This information from the state estimator flows to control centers and database servers across the network. The variables of interest are indicative of parameters like margins to operating limits, health of equipment and required operator action. State estimators allow the calculation of these variables of interest with high confidence despite the facts that the measurements may be corrupted by noise, or could be missing or inaccurate. Even though we may not be able to directly observe the state, it can be inferred from a scan of measurements which are assumed to be synchronized. The algorithms need to allow for the fact that presence of noise might skew the measurements. In a typical power system, the State is quasi-static. The time constants are sufficiently fast so that system dynamics decay away quickly (with respect to measurement frequency). The system appears to be progressing through a sequence of static states that are driven by various parameters like changes in load profile. The inputs of the state estimator can be given to various applications like Load Flow Analysis, Contingency Analysis, and other applications. === Load Flow Applications (LFA) === Load flow study is an important tool involving numerical analysis applied to a power system. The load flow study usually uses simplified notations like a single-line diagram and focuses on various forms of AC power rather than voltage and current. It analyzes the power systems in normal steady-state operation. The goal of a power flow study is to obtain complete voltage angle and magnitude information for each bus in a power system for specified load and generator real power and voltage conditions. Once this

  Read more →
• 

  Datacap

  Datacap (an IBM Company), a privately owned company, manufactures and sells computer software, and services. Datacap's first product, Paper Keyboard, was a "forms processing" product and shipped in 1989. In August 2010, IBM announced that it had acquired Datacap for an undisclosed amount. == Overview == Datacap sells products through a value-added distribution network worldwide. The software is classified as "enterprise software", meaning that it requires trained professionals to install and configure. Although the Company has focused on providing solutions for scanning paper documents, most recently Company materials have emphasized customer requirements to handle electronic documents ("eDocs"), documents being received into an organization electronically (usually email). Datacap claims that its software is unique because of the rules engine ("Rulerunner") used for processing inbound documents, including performing the image processing (deskew, noise removal, etc.), optical character recognition (OCR), intelligent character recognition (ICR), validations, and export-release formatting of extracted data to target ERP and line of business application.

  Read more →
• 

  Is an AI Blog Writer Worth It in 2026?

  Trying to pick the best AI blog writer? An AI blog writer is software that uses machine learning to help you get more done — it scales effortlessly from a single task to thousands. The best picks balance beginner-friendly simplicity with the depth power users need, and they ship updates often. Whether you are a beginner or a pro, the right AI blog writer slots into your workflow and pays for itself fast. This guide breaks down the top picks, their pros and cons, and who each one is best for.

  Read more →
• 

  Optical Character Recognition (Unicode block)

  Optical Character Recognition is a Unicode block containing signal characters for OCR and MICR standards. == Block == == Subheadings == The Optical Character Recognition block has three informal subheadings (groupings) within its character collection: OCR-A, MICR, and OCR. === OCR-A === The OCR-A subheading contains six characters taken from the OCR-A font described in the ISO 1073-1:1976 standard: U+2440 ⑀ OCR HOOK, U+2441 ⑁ OCR CHAIR, U+2442 ⑂ OCR FORK, U+2443 ⑃ OCR INVERTED FORK, U+2444 ⑄ OCR BELT BUCKLE, and U+2445 ⑅ OCR BOW TIE. The OCR bow tie is given the informative alias "unique asterisk". The hook, chair and fork, in addition to a long vertical bar, are included in the most basic "numeric" implementation level of OCR-A, which includes digits but excludes letters and conventional punctuation. By contrast, the most basic implementation level of OCR-B instead includes the digits, plus sign, less-than sign, greater-than sign, long vertical bar and seven of the capital letters; as such, there are no characters specific to OCR-B in the Optical Character Recognition block. === MICR === The MICR subheading contains four punctuation characters for bank cheque identifiers, taken from the magnetic ink character recognition E-13B font (codified in the ISO 1004:1995 standard): U+2446 ⑆ OCR BRANCH BANK IDENTIFICATION, U+2447 ⑇ OCR AMOUNT OF CHECK, U+2448 ⑈ OCR DASH, and U+2449 ⑉ OCR CUSTOMER ACCOUNT NUMBER. The latter two characters are misnamed: their names were inadvertently switched when they were named in the 1993 (first) edition of ISO/IEC 10646, a mistake which had been present since Unicode 1.0.0. Although their formal names remain unchanged due to the Unicode stability policy, they both have corrected normative aliases: U+2448 ⑈ is MICR ON US SYMBOL, and U+2449 ⑉ is MICR DASH SYMBOL (the standard notes that "the Unicode character names include several misnomers"). These symbols had previously been encoded by the ISO-IR-98 encoding defined by ISO 2033:1983, in which they were simply named SYMBOL ONE through SYMBOL FOUR. All four characters have informative aliases in the Unicode charts: "transit", "amount", "on us", and "dash" respectively. === OCR === The OCR subheading consists of a single character: U+244A ⑊ OCR DOUBLE BACKSLASH. == History == The following Unicode-related documents record the purpose and process of defining specific characters in the Optical Character Recognition block:

  Read more →
• 

  EffectsLab Pro

  EffectsLab Pro is a discontinued visual effects software product developed by FXhome. It has since been superseded by the FXhome HitFilm range. The company also produced a limited functionality version, EffectsLab Lite, containing just the Particle engine. A more extensive product, VisionLab Studio, combined the functionality of EffectsLab Pro and the company's CompositeLab Pro product with enhancements to both. == Effects Engines == The effects are generated by the program's effect engines: The Neon Light engine allows light beams to be drawn onto the video, allowing the generation of lightsaber-like weapons, neon lighting, fantasy glow effects and laser blasts. The Particle engine is used for particle effects, such as smoke, fire, explosions, and weather effects. The Muzzle Flash engine is designed for creating and animating muzzle flashes such as machine gun firing, tank blasts, etc. It's possible to rotate the created muzzle flash in 3D, making it the only engine with 3D use. The Optics engine is designed for creating artificial lens flares and light sources. It is useful for enhancing other light-based effects, and mimicking the distinctive flashes of light that accompany Star Wars' lightsaber battles. The Laser engine (introduced in EffectsLab Pro in late 2007) is designed as a simplified method of creating laser weapon effects, including the ability to add simulated perspective to the effect. == Presets == EffectsLab Pro allows the user to save the effects using presets. Since all effects are generated from settings in the different engines, it is fairly easy to generate an XML style description of the effect. It is also possible to share presets on FXhome's website.

  Read more →
• 

  Imitation learning

  Imitation learning is a paradigm in reinforcement learning, where an agent learns to perform a task by supervised learning from expert demonstrations . It is also called learning from demonstration and apprenticeship learning. It has been applied to underactuated robotics, self-driving cars, quadcopter navigation, helicopter aerobatics, and locomotion. == Approaches == Expert demonstrations are recordings of an expert performing the desired task, often collected as state-action pairs ( o t ∗ , a t ∗ ) {\displaystyle (o_{t}^{},a_{t}^{})} . === Behavior Cloning === Behavior Cloning (BC) is the most basic form of imitation learning. Essentially, it uses supervised learning to train a policy π θ {\displaystyle \pi _{\theta }} such that, given an observation o t {\displaystyle o_{t}} , it would output an action distribution π θ ( ⋅ | o t ) {\displaystyle \pi _{\theta }(\cdot |o_{t})} that is approximately the same as the action distribution of the experts. BC is susceptible to distribution shift. Specifically, if the trained policy differs from the expert policy, it might find itself straying from expert trajectory into observations that would have never occurred in expert trajectories. This was already noted by ALVINN, where they trained a neural network to drive a van using human demonstrations. They noticed that because a human driver never strays far from the path, the network would never be trained on what action to take if it ever finds itself straying far from the path. === DAgger === DAgger (Dataset Aggregation) improves on behavior cloning by iteratively training on a dataset of expert demonstrations. In each iteration, the algorithm first collects data by rolling out the learned policy π θ {\displaystyle \pi _{\theta }} . Then, it queries the expert for the optimal action a t ∗ {\displaystyle a_{t}^{}} on each observation o t {\displaystyle o_{t}} encountered during the rollout. Finally, it aggregates the new data into the dataset D ← D ∪ { ( o 1 , a 1 ∗ ) , ( o 2 , a 2 ∗ ) , . . . , ( o T , a T ∗ ) } {\displaystyle D\leftarrow D\cup \{(o_{1},a_{1}^{}),(o_{2},a_{2}^{}),...,(o_{T},a_{T}^{})\}} and trains a new policy on the aggregated dataset. === Decision transformer === The Decision Transformer approach models reinforcement learning as a sequence modelling problem. Similar to Behavior Cloning, it trains a sequence model, such as a Transformer, that models rollout sequences ( R 1 , o 1 , a 1 ) , ( R 2 , o 2 , a 2 ) , … , ( R t , o t , a t ) , {\displaystyle (R_{1},o_{1},a_{1}),(R_{2},o_{2},a_{2}),\dots ,(R_{t},o_{t},a_{t}),} where R t = r t + r t + 1 + ⋯ + r T {\displaystyle R_{t}=r_{t}+r_{t+1}+\dots +r_{T}} is the sum of future reward in the rollout. During training time, the sequence model is trained to predict each action a t {\displaystyle a_{t}} , given the previous rollout as context: ( R 1 , o 1 , a 1 ) , ( R 2 , o 2 , a 2 ) , … , ( R t , o t ) {\displaystyle (R_{1},o_{1},a_{1}),(R_{2},o_{2},a_{2}),\dots ,(R_{t},o_{t})} During inference time, to use the sequence model as an effective controller, it is simply given a very high reward prediction R {\displaystyle R} , and it would generalize by predicting an action that would result in the high reward. This was shown to scale predictably to a Transformer with 1 billion parameters that is superhuman on 41 Atari games. === Other approaches === See for more examples. == Related approaches == Inverse Reinforcement Learning (IRL) learns a reward function that explains the expert's behavior and then uses reinforcement learning to find a policy that maximizes this reward. Recent works have also explored multi-agent extensions of IRL in networked systems. Generative Adversarial Imitation Learning (GAIL) uses generative adversarial networks (GANs) to match the distribution of agent behavior to the distribution of expert demonstrations. It extends a previous approach using game theory.

  Read more →
• 

  Dan Jurafsky

  Daniel Jurafsky is a professor of linguistics and computer science at Stanford University, and also an author. With Daniel Gildea, he is known for developing the first automatic system for semantic role labeling (SRL). He is the author of The Language of Food: A Linguist Reads the Menu (2014) and a textbook on speech and language processing (2000). For the former, Jurafsky was named a finalist for the James Beard Award. Jurafsky was given a MacArthur Fellowship in 2002. == Education == Jurafsky received his B.A in linguistics (1983) and Ph.D. in computer science (1992), both at University of California, Berkeley; and then a postdoc at International Computer Science Institute, Berkeley (1992–1995). == Academic life == He is the author of The Language of Food: A Linguist Reads the Menu (W. W. Norton & Company, 2014). With James H. Martin, he wrote the textbook Speech and Language Processing: An Introduction to Natural Language Processing, Computational Linguistics, and Speech Recognition (Prentice Hall, 2000). The first automatic system for semantic role labeling (SRL, sometimes also referred to as "shallow semantic parsing") was developed by Daniel Gildea and Daniel Jurafsky to automate the FrameNet annotation process in 2002; SRL has since become one of the standard tasks in natural language processing. == Personal life == Jurafsky is Jewish. He is married. They reside in San Francisco, California. == Selected works == 2009. Speech and Language Processing: An Introduction to Natural Language Processing, Computational Linguistics, and Speech Recognition, 2nd Edition. (with James H. Martin) Prentice-Hall. ISBN 978-0131873216 2014. The Language of Food: A Linguist Reads the Menu. W. W. Norton & Company. ISBN 978-0393240832 2026. Speech and Language Processing: An Introduction to Natural Language Processing, Computational Linguistics, and Speech Recognition, 3rd Edition draft. (with James H. Martin) == Honors and awards == 1998. NSF Career Award 2002. MacArthur Fellowship 2019. LSA Fellow 2022. Atkinson Prizes in Psychological and Cognitive Sciences

  Read more →
• 

  Deepset

  deepset is an enterprise software vendor that provides developers with the tools to build production-ready Artificial Intelligence (AI) and natural language processing (NLP) systems, using architectures such as agents, retrieval augmented generation (RAG) and multimodal AI. It was founded in 2018 in Berlin by Milos Rusic, Malte Pietsch, and Timo Möller. deepset authored and maintains the open source software Haystack and its commercial SaaS and self-hosted (VPC, on-prem, air gapped) offering, Haystack Enterprise Platform. (formerly known as deepset Cloud and deepset AI Platform) == History == In June 2018, Milos Rusic, Malte Pietsch, and Timo Möller co-founded deepset in Berlin, Germany. In the same year, the company served first customers who wanted to implement NLP services by tailoring BERT language models to their domain. In July 2019, the company released the initial version of the open source software FARM. In November 2019, the company released the initial version of the open source software Haystack. Throughout 2020 and 2021 deepset published several applied research papers at EMNLP, COLING and ACL, the leading conferences in the area of NLP. In 2020, the research contributions comprised German language models named GBERT and GELECTRA, and a question answering dataset addressing the COVID-19 pandemic called COVID-QA, which was created in collaboration with Intel and has been annotated by biomedical experts. In 2021, the research contributions comprised German models and datasets for question answering and passage retrieval named GermanQuAD and GermanDPR, a semantic answer similarity metric, and an approach for multimodal retrieval of texts and tables to enable question answering on tabular data. Haystack contains implementations of all three contributions, enabling the use of the research through the open source framework. In November 2021, the development of the FARM framework was discontinued and its main features were integrated into the Haystack framework. In April 2022, the company announced its commercial SaaS offering deepset Cloud, which was rebranded in 2025 as Haystack Enterprise Platform supporting SaaS and on-premise deployment options. As of August 2023, the most popular finetuned language model created by deepset was downloaded more than 52 million times. In 2024, deepset was named a Gartner Cool Vendor in AI Engineering. In 2025, deepset was recognized for its growth by WirtschaftsWoche and Sifted and shared partnership integrations and announcements with Meta Llama Stack, MongoDB, NVIDIA, Amazon Web Services (AWS), and PwC. As of September 2025, the Haystack open source AI orchestration framework has more than 24,000 GitHub stars. == Products and applications == Haystack is an open source Python AI Orchestration framework for building custom AI agents and applications with large language models. With its modular building block components, software developers and AI engineers can implement pipelines to build and customize various AI architectures over large document and multimodal data collections, such as agents, retrieval augmented generation (RAG), intelligent document processing (IDP), text-to-SQL as well as document retrieval, semantic search, text generation, question answering, or summarization. Haystack emphasizes context engineering, an approach to AI system design that focuses on explicit control over how contextual information is retrieved, structured, routed to language models, and evaluated after generation. This allows developers to build AI systems with transparent data flow, tool usage, and configurable reasoning processes. Haystack integrates with 90+ model and technology providers including Hugging Face Transformers, Elasticsearch, OpenSearch, OpenAI, Cohere, Anthropic, Mistral and others. Developers can extend these integrations with their own custom components. The framework has an active community on Discord with more than 4k members and GitHub, where so far more than 300 people have contributed to its continuous development, and engage on Meetup. Thousands of organizations use the framework, including public sector leaders like the European Commission and Global 500 enterprises like Airbus, Intel, NVIDIA, Lufthansa, Netflix, Apple, Infineon, Alcatel-Lucent Enterprise, BetterUp, Etalab, Sooth.ai, and Lego. On top of the Haystack open source framework, deepset offers two enterprise offerings to organizations. Haystack Enterprise Starter provides enterprise support on the open source framework from the Haystack engineering team as well as a private GitHub repository with production use case templates and Kubernetes deployment guides. The Haystack Enterprise Platform supports customers at building scalable AI applications by covering the entire process of prototyping, experimentation, deployment, monitoring, and governance. It is built on the Haystack open source framework and is available for hosting in the cloud and self-hosted via VPC, on-premise, or air gapped environments. deepset's enterprise tools are used by organizations including The European Commission, The Economist, Oxford University Press, the German Federal Ministry of Research, Technology, and Space (BMFTR), Manz Verlag, and the German Armed Forces. FARM was an earlier framework for adapting representation models. One of its core concepts was the implementation of adaptive models, which comprised language models and an arbitrary number of prediction heads. FARM supported domain-adaptation and finetuning of these models with advanced options, for example gradient accumulation, cross-validation or automatic mixed-precision training. Its main features were integrated into Haystack in November 2021, and its development was discontinued at that time. == Funding == On August 9, 2023, deepset announced a Series B investment round of $30 million led by Balderton Capital and including participation from existing investors GV, System.One, Lunar Ventures and Harpoon Ventures. On April 28, 2022, deepset announced a Series A investment round of $14 million led by GV, with the participation of Harpoon Ventures, Acequia Capital and a team of experienced commercial open source software and machine learning founders, such as Alex Ratner (Snorkel AI), Mustafa Suleyman (Deepmind), Spencer Kimball (Cockroach Labs), Jeff Hammerbacher (Cloudera) and Emil Eifrem (Neo4j). A previous pre-seed investment round of $1.6 million on March 8, 2021, was led by System.One and Lunar Ventures, who also participated in the subsequent Series A round.

  Read more →
• 

  Cybernetic Serendipity

  Cybernetic Serendipity was an exhibition of cybernetic art curated by Jasia Reichardt, shown at the Institute of Contemporary Arts, London, England, from 2 August to 20 October 1968, and then toured across the United States. Two stops in the United States were the Corcoran Annex (Corcoran Gallery of Art), Washington, D.C., from 16 July to 31 August 1969, and the newly opened Exploratorium in San Francisco, from 1 November to 18 December 1969. == Content == One part of the exhibition was concerned with algorithms and devices for generating music. Some exhibits were pamphlets describing the algorithms, whilst others showed musical notation produced by computers. Devices made musical effects and played tapes of sounds made by computers. Peter Zinovieff lent part of his studio equipment - visitors could sing or whistle a tune into a microphone and his equipment would improvise a piece of music based on the tune. Another part described computer projects such as Gustav Metzger's self-destructive Five Screens With Computer, a design for a new hospital, a computer programmed structure, and dance choreography. The machines and installations were a very noticeable part of the exhibition. Gordon Pask produced a collection of large mobiles (Colloquy of Mobiles (1968)) with interacting parts that let the viewers join in the conversation. Many machines formed kinetic environments or displayed moving images. Bruce Lacey contributed his radio-controlled robots and a light-sensitive owl. Nam June Paik was represented by Robot K-456 and televisions with distorted images. Jean Tinguely provided two of his painting machines. Edward Ihnatowicz's biomorphic hydraulic ear (Sound Activated Mobile (SAM, 1968)) turned toward sounds and John Billingsley's Albert 1967 turned to face light. Wen-Ying Tsai presented his interactive cybernetic sculptures of vibrating stainless-steel rods, stroboscopic light, and audio feedback control. Several artists exhibited machines that drew patterns that the visitor could take away, or involved visitors in games. Cartoonist Rowland Emett designed the mechanical computer Forget-me-not, which was commissioned by Honeywell. Another section explored the computer's ability to produce text - both essays and poetry. Different programs produced Haiku, children's stories, and essays. One of the first computer-generated poems, by Alison Knowles and James Tenney, was included in the exhibition and catalogue. Computer-generated movies were represented by John Whitney's Permutations and a Bell Labs movie on their technology for producing movies. Some samples included images of tesseracts rotating in four dimensions, a satellite orbiting the Earth, and an animated data structure. Computer graphics were also represented, including pictures produced on cathode ray oscilloscopes and digital plotters. There was a variety of posters and graphics demonstrating the power of computers to do complex (and apparently random) calculations. Other graphics showed a simulated Mondrian and the iconic decreasing squares spiral that appeared on the exhibition's poster and book. The Boeing Company exhibited their use of wireframe graphics. The innovative computer-generated sculpture, Quad 1, was displayed at the Cybernetic Serendipity exhibit. Created by the American abstract expressionist sculptor, Robert Mallary, in 1968, Quad 1 is widely believed to be the world's first Computer Aided Design sculpture. Keith Albarn & Partners contributed to the design of the exhibition. Reflecting the prominence of music in the show, a ten-track album Cybernetic Serendipity Music was released by the ICA to accompany the show. Artists featured included Iannis Xenakis, John Cage, and Peter Zinovieff, a detail of whose graphic score for 'Four Sacred April Rounds’ (1968) was used as the cover artwork. == Attendance == Time magazine noted that there had been 40,000 visitors to the London exhibition. Other reports suggested visitor numbers were as high as 44,000 to 60,000. However, the ICA did not accurately count visitors. == After-effects == The exhibition provided the energy for the formation of British Computer Arts Society which continued to explore the interaction between science, technology and art, and put on exhibitions (for example Event One at the Royal College of Art). Several pieces were purchased by the Exploratorium in 1971, some of which are on display to this day. In 2014 the ICA held a retrospective exhibition Cybernetic Serendipity: A Documentation which included documents, installation photographs, press reviews and publications and a series of discussions in one of which Peter Zinovieff took part. To coincide with the exhibition, Cybernetic Serendipity Music was re-released as a limited-edition vinyl LP by The Vinyl Factory. The Victoria and Albert Museum marked the 50th anniversary with an exhibition in 2018 entitled "Chance and Control: Art in the Age of Computers". The V&A exhibition included many works by artists who featured in the original ICA show, plus related ephemera. "Chance and Control" subsequently toured to Chester Visual Arts and Firstsite, Colchester. In 2020, The Centre Pompidou exhibited the replica of Gordon Pask's 1968 Colloquy of Mobiles, reproduced by Paul Pangaro and TJ McLeish in 2018. In 2022 the Australian National University's School of Cybernetics launched the school by presenting an exhibition Australian Cybernetic: a point through time. The exhibition included works from Cybernetic Serendipity (1968), Australia ‘75: Festival of Creative Arts and Science (1975), and contemporary pieces curated by the School of Cybernetics. In describing Reichardt's Cybernetic Serendipity exhibition the school stated that it "represented points of expanding the cybernetic imagination" and was a "ground-breaking" "glimpse of a future in which computers were entangled with people and cultures, and through this she fashioned a blueprint for the future of computing that has since inspired generations".

  Read more →
• 

  Top 10 AI Chatbots Compared (2026)

  Shopping for the best AI chatbot? An AI chatbot is software that uses machine learning to help you get more done — it keeps getting smarter as the underlying models improve. Pricing, accuracy, and the size of the model behind the tool are the three factors that most affect daily usefulness. Whether you are a beginner or a pro, the right AI chatbot slots into your workflow and pays for itself fast. Below we compare features, pricing, and real output so you can choose with confidence.

  Read more →
• 

  Top 10 AI Marketing Tools Compared (2026)

  Comparing the best AI marketing tool? An AI marketing tool is software that uses machine learning to help you get more done — it lowers the barrier so anyone can produce professional output. Privacy matters too: check whether your data trains the model and whether a no-log or enterprise tier is available. Whether you are a beginner or a pro, the right AI marketing tool slots into your workflow and pays for itself fast. We tested the leading options and ranked them by quality, value, and ease of use.

  Read more →
• 

  Internettolken

  Internettolken (or InternetPreter) is a web-based machine translating tool. As the first Swedish online translating service, it was started in 2002 and included the English and Swedish languages. Today, there are 14 languages with more than 120 possible combinations. The service is free up to 150 words per day, and as a 2,000-word free testing account. It is available both on its website, and as a gadget on iGoogle. The interface is either English or Swedish. Being a dictionary-based tool, with its own translation software, it can sometimes offer a more accurate translation than Google Translate and others, although the grammar will be incorrect. == Languages currently available ==

  Read more →
• 

  Purged cross-validation

  Purged cross-validation is a variant of k-fold cross-validation designed to prevent look-ahead bias in time series and other structured data, developed in 2017 by Marcos López de Prado at Guggenheim Partners and Cornell University. It is primarily used in financial machine learning to ensure the independence of training and testing samples when labels depend on future events. It provides an alternative to conventional cross-validation and walk-forward backtesting methods, which often yield overly optimistic performance estimates due to information leakage and overfitting. == Motivation == Standard cross-validation assumes that observations are independently and identically distributed (IID), which often does not hold in time series or financial datasets. If the label of a test sample overlaps in time with the features or labels in the training set, the result may be data leakage and overfitting. Purged cross-validation addresses this issue by removing overlapping observations and, optionally, adding a temporal buffer ("embargo") around the test set to further reduce the risk of leakage. The figure below illustrates standard 5 Fold Cross-Validation == Purging == Purging removes from the training set any observation whose timestamp falls within the time range of formation of a label in the test set. This can be the case for train set observations before and after the test set. Their removal ensures that the algorithm cannot learn during train time information that will be used to assess the performance of the algorithm. See the figure below for an illustration of purging. == Embargoing == Embargoing addresses a more subtle form of leakage: even if an observation does not directly overlap the test set, it may still be affected by test events due to market reaction lag or downstream dependencies. To guard against this, a percentage-based embargo is imposed after each test fold. For example, with a 5% embargo and 1000 observations, the 50 observations following each test fold are excluded from training. Unlike purging, embargoing can only occur after the test set. The figure below illustrates the application of embargo: == Applications == Purged and embargoed cross-validation has been useful in: Backtesting of trading strategies Validation of classifiers on labeled event-driven returns Any machine learning task with overlapping label horizons == Example == To illustrate the effect of purging and embargoing, consider the figures below. Both diagrams show the structure of 5-fold cross-validation over a 20-day period. In each row, blue squares indicate training samples and red squares denote test samples. Each label is defined based on the value of the next two observations, hence creating an overlap. If this overlap is left untreated, test set information leaks into the train set. The second figure applies the Purged CV procedure. Notice how purging removes overlapping observations from the training set and the embargo widens the gap between test and training data. This approach ensures that the evaluation more closely resembles a true out-of-sample test and reduces the risk of backtest overfitting. == Combinatorial Purged Cross-Validation == Walk-forward backtesting analysis, another common cross-validation technique in finance, preserves temporal order but evaluates the model on a single sequence of test sets. This leads to high variance in performance estimation, as results are contingent on a specific historical path. Combinatorial Purged Cross-Validation (CPCV) addresses this limitation by systematically constructing multiple train-test splits, purging overlapping samples, and enforcing an embargo period to prevent information leakage. The result is a distribution of out-of-sample performance estimates, enabling robust statistical inference and more realistic assessment of a model's predictive power. === Methodology === CPCV divides a time-series dataset into N sequential, non-overlapping groups. These groups preserve the temporal order of observations. Then, all combinations of k groups (where k < N) are selected as test sets, with the remaining N − k groups used for training. For each combination, the model is trained and evaluated under strict controls to prevent leakage. To eliminate potential contamination between training and test sets, CPCV introduces two additional mechanisms: Purging: Any training observations whose label horizon overlaps with the test period are excluded. This ensures that future information does not influence model training. Embargoing: After the end of each test period, a fixed number of observations (typically a small percentage) are removed from the training set. This prevents leakage due to delayed market reactions or auto-correlated features. Each data point appears in multiple test sets across different combinations. Because test groups are drawn combinatorially, this process produces multiple backtest "paths," each of which simulates a plausible market scenario. From these paths, practitioners can compute a distribution of performance statistics such as the Sharpe ratio, drawdown, or classification accuracy. === Formal definition === Let N be the number of sequential groups into which the dataset is divided, and let k be the number of groups selected as the test set for each split. Then: The number of unique train-test combinations is given by the binomial coefficient: ( N k ) {\displaystyle {\binom {N}{k}}} Each observation is used in k {\displaystyle k} test sets and contributes to φ [ N , k ] {\displaystyle \varphi [N,k]} unique backtest paths: φ [ N , k ] = k N ( N k ) {\displaystyle \varphi [N,k]={\frac {k}{N}}{\binom {N}{k}}} This yields a distribution of performance metrics rather than a single point estimate, making it possible to apply Monte Carlo-based or probabilistic techniques to assess model robustness. === Illustrative example === Consider the case where N = 6 and k = 2. The number of possible test set combinations is ( 6 2 ) = 15 {\displaystyle {\binom {6}{2}}=15} . Each of the six groups appears in five test splits. Consequently, five distinct backtest paths can be constructed, each incorporating one appearance from every group. ==== Test group assignment matrix ==== This table shows the 15 test combinations. An "x" indicates that the corresponding group is included in the test set for that split. ==== Backtest path assignment ==== Each group contributes to five different backtest paths. The number in each cell indicates the path to which the group's result is assigned for that split. === Advantages === Combinatorial Purged Cross-Validation offers several key benefits over conventional methods: It produces a distribution of performance metrics, enabling more rigorous statistical inference. The method systematically eliminates lookahead bias through purging and embargoing. By simulating multiple historical scenarios, it reduces the dependence on any single market regime or realization. It supports high-confidence comparisons between competing models or strategies. CPCV is commonly used in quantitative strategy research, especially for evaluating predictive models such as classifiers, regressors, and portfolio optimizers. It has been applied to estimate realistic Sharpe ratios, assess the risk of overfitting, and support the use of statistical tools such as the Deflated Sharpe Ratio (DSR). === Limitations === The main limitation of CPCV stems from its high computational cost. However, this cost can be managed by sampling a finite number of splits from the space of all possible combinations.

  Read more →
• 

  Edward Stabler

  Edward Stabler is a Professor of Linguistics at the University of California, Los Angeles. His primary areas of research are (1) Natural Language Processing (NLP), (2) Parsing and formal language theory, and (3) Philosophy of Logic and Language. He was a member of the faculty at UCLA from 1984 to 2016. His work involves the production of software for minimalist grammars (MGs) and related systems. == Early life and education == Stabler received his Ph.D. from the Department of Linguistics and Philosophy at MIT in 1981. == Recent publications == Edward Stabler (2011) Computational perspectives on minimalism. Revised version in C. Boeckx, ed, Oxford Handbook of Linguistic Minimalism, pp. 617–642. Edward Stabler (2010) A defense of this perspective against the Evans&Levinson critique appears here, with revised version in Lingua 120(12): 2680-2685. Edward Stabler (2010) After GB. Revised version in J. van Benthem & A. ter Meulen, eds, Handbook of Logic and Language, pp. 395–414. Edward Stabler (2010) Recursion in grammar and performance. Presented at the 2009 UMass recursion conference. Edward Stabler (2009) Computational models of language universals. Revised version appears in M. H. Christiansen, C. Collins, and S. Edelman, eds., Language Universals, Oxford: Oxford University Press, pages 200-223. Edward Stabler (2008) Tupled pregroup grammars. Revised version appears in P. Casadio and J. Lambek, eds., Computational Algebraic Approaches to Natural Language, Milan: Polimetrica, pages 23–52. Edward Stabler (2006) Sidewards without copying. Proceedings of the 11th Conference on Formal Grammar, edited by P. Monachesi, G. Penn, G. Satta, and S. Wintner. Stanford: CSLI Publications, 2006, pages 133-146.

  Read more →
• 

  Karen Spärck Jones

  Karen Ida Boalth Spärck Jones (26 August 1935 – 4 April 2007) was a self-taught programmer and a pioneering British computer and information scientist responsible for the concept of inverse document frequency (IDF), a technology that underlies most modern search engines. She was an advocate for women in computer science, her slogan being, "Computing is too important to be left to men." In 2019, The New York Times published her belated obituary in its series Overlooked, calling her "a pioneer of computer science for work combining statistics and linguistics, and an advocate for women in the field." From 2008, to recognise her achievements in the fields of information retrieval (IR) and natural language processing (NLP), the Karen Spärck Jones Award is awarded annually to a recipient for outstanding research in one or both of her fields. == Early life and education == Karen Ida Boalth Spärck Jones was born in Huddersfield, Yorkshire, England. Her parents were Alfred Owen Jones, a chemistry lecturer, and Ida Spärck, a Norwegian who worked for the Norwegian government while in exile in London during World War II. Spärck Jones was educated at a grammar school in Huddersfield and then from 1953 to 1956 at Girton College, Cambridge, studying history, with an additional final year in Moral Sciences (philosophy). While at Cambridge, Spärck Jones joined the organisation known as the Cambridge Language Research Unit (CLRU) and met the head of CLRU Margaret Masterman, who would inspire her to go into computer science. While working at the CLRU, Spärck Jones began pursuing her PhD. At the time of submission, her PhD thesis was cast aside as uninspired and lacking original thought, but was later published in its entirety as a book. She briefly became a school teacher before moving into computer science. Spärck Jones married fellow Cambridge computer scientist Roger Needham in 1958. Spärck Jones's mother, Ida Spärck, had fled Norway on one of the last boats out after the German invasion in April 1940, going on to serve the Norwegian government in exile in London throughout the war. This background of displacement and resilience shaped the household in which Spärck Jones grew up. She later kept her mother's Norwegian surname professionally after marrying, stating that "it maintains a permanent existence of your own." Spärck Jones described her entry into computing as almost accidental. She had been working as a schoolteacher when she began visiting the CLRU out of curiosity about her husband's work. It was Margaret Masterman — whom she later described as "a very strange and interesting woman" — who offered her a research position and drew her fully into the field. == Career == Spärck Jones worked at the Cambridge Language Research Unit from the late 1950s, then at Cambridge University Computer Laboratory from 1974 until her retirement in 2002. From 1999, she held the post of Professor of Computers and Information. She had been given a permanent position only in 1993, and earlier in her career had been employed on a series of short-term contracts. She continued to work in the Computer Laboratory until shortly before her death. Her publications include nine books and numerous papers. A full list of her publications is available from the Cambridge Computer Laboratory. Spärck Jones' main research interests, since the late 1950s, were natural language processing and information retrieval. In 1964, Spärck Jones published "Synonymy and Semantic Classification", which is now seen as a foundational paper in the field of natural language processing. One of her most important contributions was the concept of inverse document frequency (IDF) weighting in information retrieval, which she introduced in a 1972 paper. IDF is used in most search engines today, usually as part of the term frequency–inverse document frequency (TF–IDF) weighting scheme. In the 1980s, Spärck Jones began her work on early speech recognition systems. In 1982 she became involved in the Alvey Programme which was an initiative to motivate more computer science research across the country. == Significance of inverse document frequency == At the time Spärck Jones was working, most computer scientists were focused on making people adapt to machines — learning precise codes and commands to retrieve information. Spärck Jones was working in the opposite direction: teaching computers to understand human language as it is actually used. Her 1972 paper introduced the concept of inverse document frequency (IDF) by observing that not all words carry equal informational value. A word like "the" appears in virtually every document and tells a retrieval system almost nothing about what any specific document is about. A rare word like "photosynthesis," by contrast, is highly specific and informative. IDF assigns each word a statistical weight based on how rarely it occurs across a document collection — the rarer the word, the higher its weight. When combined with term frequency (TF), which measures how often a word appears within a single document, the resulting TF–IDF score gives every word a relevance rating that can be used to rank documents in response to a search query. By 2007, Spärck Jones noted that "pretty much every web engine uses those principles." Her colleague John Tait remarked that "a lot of the stuff she was working on until five or ten years ago seemed like mad nonsense, and now we take it for granted." The 1972 paper remains among the most cited works in information retrieval research, with over 4,500 citations recorded in Google Scholar at the time of her death. The conceptual foundation of TF–IDF — that word meaning is statistical and contextual — has also informed later developments in machine learning and natural language processing, including transformer-based language models such as BERT. == Impact on artificial intelligence == Even though Spärck Jones' views on artificial intelligence (AI) were rather pessimistic in regard to the perceived limitations of AI in information retrieval, her work in natural language processing, information retrieval, and introducing the concept of inverse document frequency (IDF) contributed to the future technological development of AI. Her statistical and ranking methods shifted the direction of the development of AI towards being more expandable and led by data. Her work had a more indirect and conceptual impact on AI, compared to the current and direct impact it has had on search engines. == Gender and advocacy == Spärck Jones spent the majority of her career at Cambridge on short-term contracts without permanent employment, a situation she attributed directly to gender. In her 2001 IEEE oral history interview she stated that Cambridge was "in many ways not user-friendly, in the sense of women-friendly." She was frequently the only woman present in professional meetings throughout her career. She channelled this experience into active advocacy. She was a founding member of the women@cl network at Cambridge's Computer Laboratory, worked on outreach programmes aimed at encouraging girls into computing, and became widely known for her slogan: "Computing is too important to be left to men." She was the first woman ever to receive the BCS Lovelace Medal. === Honours and awards === These include: Gerard Salton Award (1988) Elected a Fellow of Association for the Advancement of Artificial Intelligence (AAAI) in 1993 President of the Association for Computational Linguistics (ACL) in 1994 Honorary degree of Doctor of Science from The City University in 1997. Elected a Fellow of the British Academy (FBA), where she also served as Vice-President in 2000–2002 Fellow of European Association for Artificial Intelligence (ECCAI) Association for Information Science and Technology (ASIS&T) Award of Merit (2002) Association for Computational Linguistics (ACL) Lifetime Achievement Award (2004) ACM - AAAI Allen Newell Award (2006) BCS Lovelace Medal (2007) Association for Computing Machinery (ACM) Women's Group Athena Award (2007) == Death and legacy == Spärck Jones died on 4 April 2007, due to cancer at the age of 71. In 2008, the BCS Information Retrieval Specialist Group (BCS IRSG) in conjunction with the British Computer Society established an annual Karen Spärck Jones Award in her honour, to encourage and promote research that advances understanding of Natural Language Processing or Information Retrieval. The Karen Spärck Jones lecture sponsored by BCS recognises the contribution that women have made to computing. In August 2017, the University of Huddersfield renamed one of its campus buildings in her honour. Formerly known as Canalside West, the Spärck Jones building houses the University's School of Computing and Engineering. When Spärck Jones died in 2007, The Times did not publish an obituary for her, despite having published one for her husband Roger Needham in 2003. In 2019, The New York Times included her in its Overlooked series under the title "Ove

  Read more →