AI Content Remover

AI Content Remover — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Line detection

In image processing, line detection is an algorithm that takes a collection of n edge points and finds all the lines on which these edge points lie. The most popular line detectors are the Hough transform and convolution-based techniques. == Hough transform == The Hough transform can be used to detect lines and the output is a parametric description of the lines in an image, for example ρ = r cos(θ) + c sin(θ). If there is a line in a row and column based image space, it can be defined ρ, the distance from the origin to the line along a perpendicular to the line, and θ, the angle of the perpendicular projection from the origin to the line measured in degrees clockwise from the positive row axis. Therefore, a line in the image corresponds to a point in the Hough space. The Hough space for lines has therefore these two dimensions θ and ρ, and a line is represented by a single point corresponding to a unique set of these parameters. The Hough transform can then be implemented by choosing a set of values of ρ and θ to use. For each pixel (r, c) in the image, compute r cos(θ) + c sin(θ) for each values of θ, and place the result in the appropriate position in the (ρ, θ) array. At the end, the values of (ρ, θ) with the highest values in the array will correspond to strongest lines in the image == Convolution-based technique == In a convolution-based technique, the line detector operator consists of a convolution masks tuned to detect the presence of lines of a particular width n and a θ orientation. Here are the four convolution masks to detect horizontal, vertical, oblique (+45 degrees), and oblique (−45 degrees) lines in an image. a) Horizontal mask(R1) (b) Vertical (R3) (C) Oblique (+45 degrees)(R2) (d) Oblique (−45 degrees)(R4) In practice, masks are run over the image and the responses are combined given by the following equation: R(x, y) = max(|R1 (x, y)|, |R2 (x, y)|, |R3 (x, y)|, |R4 (x, y)|) If R(x, y) > T, then discontinuity As can be seen below, if mask is overlay on the image (horizontal line), multiply the coincident values, and sum all these results, the output will be the (convolved image). For example, (−1)(0)+(−1)(0)+(−1)(0) + (2)(1) +(2)(1)+(2)(1) + (−1)(0)+(−1)(0)+(−1)(0) = 6 pixels on the second row, second column in the (convolved image) starting from the upper left corner of the horizontal lines. page 82 == Example == These masks above are tuned for light lines against a dark background, and would give a big negative response to dark lines against a light background. == Code example == The code was used to detect only the vertical lines in an image using Matlab and the result is below. The original image is the one on the top and the result is below it. As can be seen on the picture on the right, only the vertical lines were detected
Read more →
Transparency in Frontier Artificial Intelligence Act

The Transparency in Frontier Artificial Intelligence Act, also referred to as SB-53, is a 2025 California law which mandates increased transparency for companies building artificial intelligence. SB-53 is primarily focused on assessing and reducing potential catastrophic risks from AI, and is the first bill addressing such risks to be passed into law in America. The bill requires companies to create publicly accessible documents assessing potential "catastrophic risk[s]" from their AI models, as well as publishing documentation on how the model incorporates national and international safety standards. SB-53 also sets up whistleblower protections and procedures for alerting the government to a "critical safety incident". == History == SB-53 was preceded in 2024 by the unsuccessful Safe and Secure Innovation for Frontier Artificial Intelligence Models Act ("SB-1047"), a proposed bill authored by Senator Scott Wiener which was vetoed by Governor Gavin Newsom. Afterwords, Newsom created a "Joint California AI Policy Working Group" to provide recommendations for AI regulation, which guided the drafting of SB-53. Senator Scott Wiener introduced the bill on January 7, 2025, and after a series of amendments, SB-53 passed the Senate 29-8 on September 13. Governor Gavin Newsom approved the bill on September 25, passing it into law. == Provisions == SB-53 applies primarily to companies making at least $500 million in yearly gross revenue. It defines a “frontier model” as any AI trained with over 1026 FLOPS (including fine-tuning), including unreleased internal models. Both the financial and computational thresholds must be met before most of the law is applied, although the threshold can be lowered or otherwise updated by the California Department of Technology in an annual review starting in 2027. Most of the bill's provisions are focused on "catastrophic risks" from AI, which are defined as incidents in which a model contributes to more than 50 deaths or serious injuries, or causes more than one billion dollars ($1,000,000,000) in economic damage from AI-assisted acts (such as cyberattacks or the creation of biological weapons). The bill requires companies to provide publicly accessible safety frameworks for frontier AI models, describing how the company tests for catastrophic risk from its AI, and how it implements protections against such risks. This includes addressing the possibility that the AI may attempt to circumvent internal guardrails or oversight mechanisms. (Certain safety incidents, such as dangerously deceptive model behavior, physical injury, or death, must be reported to California Office of Emergency Services (OES) within 15 days, unless the incident poses imminent physical risk, in which case it must be reported immediately.) The company must follow its published framework, and if any changes are made, the framework should be updated within 30 days, and justification for said changes must also be made public. Additionally, all frontier companies are required to publish basic information about newly released frontier models (such as terms of service, supported languages, and intended use), although only large companies (making over $500 million annually) need to publish full safety frameworks. SB-53 also establishes various whistleblower protections for covered employees. Large companies must have anonymous whistleblowing channels in place which protect employees from retaliation from reporting risks to state or federal authorities if they have reasonable cause to believe that their employer is substantially risking public health and safety.
Read more →
Ebert test

The Ebert test gauges whether a computer-based synthesized voice can tell a joke with sufficient skill to cause people to laugh. It was proposed by film critic Roger Ebert at the 2011 TED conference as a challenge to software developers to have a computerized voice master the inflections, delivery, timing, and intonations of human speech. The test is similar to the Turing test proposed by Alan Turing in 1950 as a way to gauge a computer's ability to exhibit intelligent behavior by generating performance indistinguishable from a human being. If the computer can successfully tell a joke, and do the timing and delivery as well as Henny Youngman, then that's the voice I want. Ebert lost his voice in 2006 after undergoing surgery to treat thyroid cancer. He employed a Scottish company called CereProc, which custom-tailors text-to-speech software for voiceless customers who record their voices at length before losing them, and mined tapes and DVD commentaries featuring Ebert to create a voice that sounded more like his own voice. He first publicly used the voice they devised for him in his March 2, 2010, appearance on The Oprah Winfrey Show. The audience of Ebert's 2011 TED talk about joke delivery by synthesized voices erupted with laughter when a synthesized voice delivered the following joke: "A guy goes into a psychiatrist. The psychiatrist says, 'You’re crazy.' The guy says, 'I want a second opinion.' The psychiatrist says, 'All right, you’re ugly, too.'"
Read more →
Knowledge processing for robots

KnowRob (Knowledge processing for robots) is a system which combines knowledge representation and reasoning methods to acquire and ground knowledge. This system is the backbone of openEASE. both under developing at the Institute for Artificial Intelligence at the University of Bremen, Germany. == The framework == KnowRob can serve as a common sense framework for the integration of knowledge. This knowledge can be static encyclopedic knowledge, common sense knowledge, task descriptions, environment models, object information, observed actions, etc., which can come from different sources, like manually axiomatized, derived from observations, or imported from the web. KnowRob has been used by different research groups, as the Rice University using the ontological knowledge base in a robotic platform. As well by the Eindhoven University of Technology research group competing in the RoboCup league, in the "at Home" category, with the RoboEarth project. As well, KnowRob is mentioned in the work of some research groups from the Lucian Blaga University of Sibiu, Middle East Technical University in their combination of different knowledge bases, Keio University as related work because of the ontology service, University of Texas at Austin as related work as well because of the relation with the work presented, Hanyang University as related work as an OWL based knowledge processing framework. == Representations == To represent the knowledge, KnowRob uses the OWL ontology language and an extended first-order logic knowledge representation with computable predicates. To give the order of subactions, KnowRob includes a pair-wise ordering constrain, which gives a partial ordering. KnowRob adopts the closed-world assumption Prolog, and an open-world assumption by the use of computables. To include reasoning rules into Prolog, KnowRob uses an inference procedure beyond the capabilities of OWL to extract information about tasks executions. In its second version, KnowRob provides a logic interface to the hybrid reasoning kernel as a logic based language. This language presents the hybrid reasoning kernel as if everything were entities retrievable by providing partial descriptions for them. This entities descriptions include objects, their parts, and articulation models, environments composed of objects, software components, actions, and events. === Episodic memories === Episodic memory is related to the experience information, which is organized temporally and spatially, alongside combined with context information. In KnowRob, an episodic memory is understood as a recording that the agent makes of the ongoing activity, which includes very detailed information about the actions, motions, their purposes, effects and the behavior they generate, it also includes the images captured during execution, etc. == Usage == The knowledge is computed by external methods using Prolog queries. In the second version of the KnowRob system, is included a better structure of the packages and documentations. Which includes some extensions from the previous version, as well as a logic based language. For example, a cup description from perception can be represented in this language as: entity(Cup,[an, object, [type, cup], [shape, cylinder], [color, orange]]) As well, a controller could represent the same object as: entity(Cup, [an, object, [type, cup], [proper_physical_parts, [an, object, [type, handle], [grasp−pose, G−pose]]]]) The interface language is comparable to other query languages for symbolic knowledge bases. KnowRob's query language integrates reasoning methods, such as the simulation-based reasoning. == Goals == The goal of the KnowRob framework is to make semantic knowledge available for service robots. It is able to answer queries about missing information in vague instructions for tasks. This is possible with the actions hierarchical representation and information about objects which can be included in certain action.
Read more →
Touch 'n Go eWallet

Touch 'n Go eWallet is a Malaysian digital wallet and online payment platform, established in Kuala Lumpur, Malaysia, in July 2017 as a joint venture between Touch 'n Go and Ant Financial. It allows users to make payments at over 280,000 merchant touch points via QR code, as well as perform peer-to-peer (P2P) money transfers. Since then, the e-wallet further diversified for users to pay for tolls via RFID or PayDirect, street parking and various online payment spanning e-hailing, car-sharing apps or taxis, various overhead bills; top-up for mobile prepaid or in-game currencies; purchases on e-commerce websites; food delivery; renewing motor insurance and other insurance/takaful plans; and even movie, bus, trains or airline tickets. == Background == Prior to the launch of the e-wallet service, Touch 'n Go provided stored-value physical all-in-one contactless card (namely Touch 'n Go cards or "TnG cards") that users can use to pay for toll fares, public transportation and parking lots as well as purchases in some retail stores. In 1999, Touch 'n Go also markets SmartTag devices that allow road users to pass through certain toll booths without the need to unwind the car window. The high entry cost of the device (around RM 100 each) also meant that only few can enjoy the seamless experience. In 2009, Touch 'n Go partnered with Maxis to launch FastTap, a new mobile payment service that utilised Near-Field Communication (NFC). Maxis customers can make payments by placing the phone near the card readers (that also supports physical bank cards and Touch ’N Go cards). However, the venture featured only one phone model, Nokia 6212, which greatly limited the public reach. In July 2012, Touch 'n Go announced another collaboration with CIMB and Maxis to create similar NFC-based online transaction service that runs on compatible smartphones. Touch 'n Go Wallet was launched in February 2017 as an QR code-based e-wallet application, to compete with Samsung Pay that utilizes NFC modules. In the controlled pilot test in Taman Tun Dr Ismail, the correspondents can experience basic functionalities (prepaid mobile service reload, bills payment, movie tickets and flight tickets purchase, transfer of money with another user, and payments at participating stores and restaurants). While the deployed version of the app was generally well-received, the existing process to transfer the balance to the physical TnG card stored value from the app garnered unanimous backlash. Test groups felt that the need to head to a self-service terminal named "Pick Up Device" in person within 24 hours for completion, along with the failure to do so (the balance would be credited back to the wallet after 24 hours), was not divulged clearly and also defeated the purpose of convenience, not to mention there were only 2 such terminals. The feature was eventually suspended. On 15 November 2017, Touch 'n Go was granted permission by the Central Bank of Malaysia to form a joint venture with Ant Financial, a Chinese-based financial company that operates Alipay. The partnership allowed the local e-wallet to learn from and build upon the operational model pioneered by Alipay. In June 2018, it was reported that Touch 'n Go was pilot testing the uses of the Touch 'n Go eWallet in Rapid Transit, as the ticketing system was enabled on the Kelana Jaya line in the Klang Valley. Pilot testing only applied to stations in Kelana Jaya, KL Gateway–Universiti, Kerinchi, KL Sentral, Dang Wangi, KLCC, and Ampang Park. The test was reported to be successful in February 2020 and was planned to be fully deployed on the LRT and MRT. Due to unforeseen circumstances, this feature did not come into fruition, the app merely adds in-app purchase of monthly concession cards called "My50". In August 2018, Touch 'n Go announced that selected drivers may experience first-hand a new RFID-based payment (later rebranded as "myRFID") that serves to replace SmartTag devices on closed toll roads with during pilot testing phase commencing on 3 September 2018. On 2 November 2018, participation in the ongoing pilot programme was expanded, allowing more drivers to sign up ahead of the public rollout of the RFID system. During the same period, Touch 'n Go has discontinued the sales of SmartTAG devices in favor of the RFID-based payment system. Initially, the installation of the RFID chip onto the car could only be done by Touch 'n Go staff at the RFID fitment centers, at no cost. As the pilot testing concluded on 15 February 2020, a self-installation kit are being offered to the public on Lazada and Shopee. Support for taxi-hailing mobile apps was added in November 2018 when Touch 'n Go partnered with EzCab and Public Cab, allowing users to make payments via QR code. This was later expanded to support MULA on 7 January 2020, and later MyCar on 4 April 2020. Touch 'n Go eWallet was also the first eWallet to convert Kuala Lumpur's most famous Ramadan bazaar in Kampong Bahru into "Kampong Kashless", a venue that can accept cashless QR payments. It welcomed more than 250,000 Malaysians including local celebrities and government officials. On 1 October 2019, some e-commerce websites owned by the Alibaba Group (TMall and Taobao) began to support Touch 'n Go eWallet payments, Lazada joined the list on 29 October 2019. Touch 'n Go eWallet was one of the three e-wallet services in Malaysia (the other being Boost and GrabPay) that was eligible for its users to receive an RM 30 credit in conjunction of E-Tunai Rakyat program under the Budget 2020 plan, that further normalizes adoption of cashless and mobile payment among Malaysians. Unlike Boost and GrabPay, whose P2P transfers were completely disabled until users have exhausted the RM 30 first, Touch 'n Go eWallet did not impose such measures. in 2020, Touch 'n Go eWallet joined DuitNow, an electronic transaction ecosystem in Malaysia which allows the funds from Touch 'n Go eWallet to be transferred to other competing services and vice versa, by implementing a standard DuitNow QR code deisgn. Japan become the first country outside Malaysia to support Touch 'n Go eWallet payment via Alipay Connect. During the COVID-19 pandemic and the enforcement of the movement control order, use of eWallets (including Touch 'n Go eWallet) increased tremendously among citizens due to its contactless nature of the payment and increased take-out orders at home; which in turn helped small and medium-sized enterprises to thrive. Touch 'n Go eWallet launched its loyalty programme – The Goal Hunter – in October 2020 where on monthly basis, users collect stamps by paying with the app in exchange for rewards that include lucky draws and other vouchers. == Services == Touch 'n Go eWallet app is available for download on both Google Play and Apple Appstore. It utilizes QR code technology for local in-store payments. The Touch 'n Go eWallet app also diversifies payment types, including but not limited to Utility bills Purchase of motor insurance policy Pay Later facility Prepaid reload and Postpaid payment to telecommunications companies loan repayments for courts, MBSJ payments, zakat and PTPTN payment for car parking P2P transfer airline ticket bookings; movie tickets from TGV Cinemas RFID refuelling at Shell stations (defunct after Shell launched its own payment app in 2024) User can reload the eWallet credit by setting up auto-reload, purchasing reload pins from convenience stores (such as 7-Eleven, KK Super Mart, MyNews, Family Mart etc.), reloading by FPX and credit/debit card. The PayDirect feature allows users to link their physical Touch 'n Go cards into the eWallet, where the toll fare can be debited from the eWallet balance when flashing the card near the sensor. In the circumstance of insufficient balance in the app, the toll fare will be deducted from the physical card's balance instead. This also conveniently allows users to view the card's remaining balance. Touch 'n Go eWallet is the first and only eWallet to offer a money-back guarantee when an unauthorised transaction is made on the user’s eWallet account, subject to Terms & Conditions. Payment via QR code scanning, including Touch 'n Go eWallet, becomes a norm in most of the shops/restaurants across Malaysia, including roadside hawkers/stall owners and automatic vending machines. The merchants usually display their owner's individual QR or Business account that they can apply for in-app. The popularity attributes to the low merchant onboarding cost (Unlike NFC payment and debit/credit card that requires purchase or rental of a payment terminal device at a yearly fee.) The app is also one of the few ewallet that supports bidirectional liquidity (alongside MAE developed by Maybank), where funds can be transferred two-way with bank accounts. This is not possible with the other major ewallets (GrabPay, Boost, ShopeePay etc.) where the money that is reloaded to the wallet cannot be transferred to another bank account, unless through manual req
Read more →
General Data Protection Regulation

The General Data Protection Regulation (Regulation (EU) 2016/679), abbreviated GDPR, is a European Union regulation on information privacy in the European Union (EU) and the European Economic Area (EEA). The GDPR is an important component of EU privacy law and human rights law, in particular Article 8(1) of the Charter of Fundamental Rights of the European Union. It also governs the transfer of personal data outside the EU and EEA. The GDPR's goals are to enhance individuals' control and rights over their personal information and to simplify the regulations for international business. It supersedes the Data Protection Directive 95/46/EC and, among other things, simplifies the terminology. The European Parliament and Council of the European Union adopted the GDPR on 14 April 2016, to become effective on 25 May 2018. As an EU regulation (instead of a directive), the GDPR has direct legal effect and does not require transposition into national law. However, it also provides flexibility for individual member states to modify (derogate from) some of its provisions. As an example of the Brussels effect, the regulation became a model for many other laws around the world, including in Brazil, Japan, Singapore, South Africa, South Korea, Sri Lanka, and Thailand. After leaving the European Union, the United Kingdom enacted its "UK GDPR", identical to the GDPR. The California Consumer Privacy Act (CCPA), adopted on 28 June 2018, has many similarities with the GDPR. == Contents == The GDPR 2016 has eleven chapters, concerning general provisions, principles, rights of the data subject, duties of data controllers or processors, transfers of personal data to third-party countries, supervisory authorities, cooperation among member states, remedies, liability or penalties for breach of rights, provisions related to specific processing situations, and miscellaneous final provisions. The GDPR also contains 173 recitals purposed to clarify scope and rationale for the regulatory provisions, as well as its legislative intents – Recital 4, for instance, begins by saying that the processing of personal data should be "designed to serve mankind". === General provisions === The regulation applies if the data controller, or processor, or the data subject (person) is based in the EU. The regulation also applies to organisations based outside the EU if they collect or process personal data of individuals located inside the EU. The regulation does not apply to the processing of data by private persons provided that the purpose has no connection to a professional or commercial activity." (Recital 18). According to the European Commission, "Personal data is information that relates to an identified or identifiable individual. If you cannot directly identify an individual from that information, then you need to consider whether the individual is still identifiable. You should take into account the information you are processing together with all the means reasonably likely to be used by either you or any other person to identify that individual." The precise definitions of terms such as "personal data", "processing", "data subject", "controller", and "processor" are stated in Article 4. The regulation does not purport to apply to the processing of personal data for national security activities or law enforcement of the EU; however, industry groups concerned about facing a potential conflict of laws have questioned whether Article 48 could be invoked to seek to prevent a data controller subject to a third country's laws from complying with a legal order from that country's law enforcement, judicial, or national security authorities to disclose to such authorities the personal data of an EU person, regardless of whether the data resides in or out of the EU. Article 48 states that any judgement of a court or tribunal and any decision of an administrative authority of a third country requiring a controller or processor to transfer or disclose personal data may not be recognised or enforceable in any manner unless based on an international agreement, like a mutual legal assistance treaty in force between the requesting third (non-EU) country and the EU or a member state. The data protection reform package also includes a separate Data Protection Directive for the police and criminal justice sector that provides rules on personal data exchanges at State level, Union level, and international levels. A single set of rules applies to all EU member states. Each member state establishes an independent supervisory authority (SA) to hear and investigate complaints, sanction administrative offences, etc. SAs in each member state co-operate with other SAs, providing mutual assistance and organising joint operations. If a business has multiple establishments in the EU, it must have a single SA as its "lead authority", based on the location of its "main establishment" where the main processing activities take place. The lead authority thus acts as a "one-stop shop" to supervise all the processing activities of that business throughout the EU. A European Data Protection Board (EDPB) co-ordinates the SAs. EDPB thus replaces the Article 29 Data Protection Working Party. There are exceptions for data processed in an employment context or in national security that still might be subject to individual country regulations. === Principles and lawful purposes === Article 5 sets out six principles relating to the lawfulness of processing personal data. The first of these specifies that data must be processed lawfully, fairly and in a transparent manner. Article 6 develops this principle by specifying that personal data may not be processed unless there is at least one legal basis for doing so. The other principles refer to "purpose limitation", "data minimisation", "accuracy", "storage limitation", and "integrity and confidentiality". Article 6 states that the lawful purposes are: (a) If the data subject has given consent to the processing of his or her personal data; (b) To fulfill contractual obligations with a data subject, or for tasks at the request of a data subject who is in the process of entering into a contract; (c) To comply with a data controller's legal obligations; (d) To protect the vital interests of a data subject or another individual; (e) To perform a task in the public interest or in official authority; (f) For the legitimate interests of a data controller or a third party, unless these interests are overridden by interests of the data subject or her or his rights according to the Charter of Fundamental Rights (especially in the case of children). If informed consent is used as the lawful basis for processing, consent must have been explicit for data collected and each purpose data is used for. Consent must be a specific, freely given, plainly worded, and unambiguous affirmation given by the data subject; an online form which has consent options structured as an opt-out selected by default is a violation of the GDPR, as the consent is not unambiguously affirmed by the user. In addition, multiple types of processing may not be "bundled" together into a single affirmation prompt, as this is not specific to each use of data, and the individual permissions are not freely given. (Recital 32). Data subjects must be allowed to withdraw this consent at any time, and the process of doing so must not be harder than it was to opt in. A data controller may not refuse service to users who decline consent to processing that is not strictly necessary in order to use the service. Consent for children, defined in the regulation as being less than 16 years old (although with the option for member states to individually make it as low as 13 years old), must be given by the child's parent or custodian, and verifiable. If consent to processing was already provided under the Data Protection Directive, a data controller does not have to re-obtain consent if the processing is documented and obtained in compliance with the GDPR's requirements (Recital 171). === Rights of the data subject === ==== Transparency and modalities ==== Article 12 requires the data controller to provide information to the "data subject in a concise, transparent, intelligible and easily accessible form, using clear and plain language, in particular for any information addressed specifically to a child." ==== Information and access ==== The right of access (Article 15) is a data subject right. It gives people the right to access their personal data and information about how this personal data is being processed. A data controller must provide, upon request, an overview of the categories of data that are being processed as well as a copy of the actual data; furthermore, the data controller has to inform the data subject on details about the processing, such as the purposes of the processing, with whom the data is shared, and how it acquired the data. A data subject must be able to transfer personal data from one electro
Read more →
Alex Krizhevsky

Alex Krizhevsky is a Canadian computer scientist most noted for his work on artificial neural networks and deep learning. In 2012, Krizhevsky, Ilya Sutskever and their PhD advisor Geoffrey Hinton, at the University of Toronto, developed a powerful visual-recognition network AlexNet using only two GeForce-branded GPU cards. This revolutionized research in neural networks. Previously neural networks were trained on CPUs. The transition to GPUs opened the way to the development of advanced AI models. == AlexNet == Motivated by Sutskever and inspired by Hinton, Krizhevsky developed AlexNet to expand the limits in image recognition and classification. Building on Convolutional Neural Networks and Sutskever’s Deep Neural Network approach of deepening the neural layers far beyond the convention of the time—as well as adding Dropout for training resilience—AlexNet won the ImageNet challenge in 2012. The team presented their paper for AlexNet at NeurIPS (NIPS) 2012. Shortly after AlexNet’s debut, Krizhevsky and Sutskever sold their startup, DNN Research Inc., to Google. Krizhevsky left Google in September 2017 after losing interest in the work, to work at the company Dessa in support of new deep-learning techniques. Many of his numerous papers on machine learning and computer vision are frequently cited by other researchers. He is also the main author of the CIFAR-10 and CIFAR-100 datasets. == Legacy == AlexNet is widely credited with igniting the deep learning revolution. Its success demonstrated the effectiveness of deep neural networks trained on GPUs, leading to rapid progress across multiple domains of artificial intelligence beyond computer vision. The techniques and momentum generated by AlexNet helped shape the development of modern natural language processing models, including large-scale transformer-based models such as BERT and GPT, which power tools like ChatGPT.
Read more →
OpenVX

OpenVX is an open, royalty-free standard for cross-platform acceleration of computer vision applications. It is designed by the Khronos Group to facilitate portable, optimized and power-efficient processing of methods for vision algorithms. This is aimed for embedded and real-time programs within computer vision and related scenarios. It uses a connected graph representation of operations. == Overview == OpenVX specifies a higher level of abstraction for programming computer vision use cases than compute frameworks such as OpenCL. The high level makes the programming easy and the underlying execution will be efficient on different computing architectures. This is done while having a consistent and portable vision acceleration API. OpenVX is based on a connected graph of vision nodes that can execute the preferred chain of operations. It uses an opaque memory model, allowing to move image data between the host (CPU) memory and accelerator, such as GPU memory. As a result, the OpenVX implementation can optimize the execution through various techniques, such as acceleration on various processing units or dedicated hardware. This architecture facilitates applications programmed in OpenVX on different systems with different power and performance, including battery-sensitive, vision-enabled, wearable displays. OpenVX is complementary to the open source vision library OpenCV. OpenVX in some applications offers a better optimized graph management than OpenCV. == History == OpenVX 1.0 specification was released in October 2014. OpenVX sample implementation was released in December 2014. OpenVX 1.1 specification was released on May 2, 2016. OpenVX 1.2 was released on May 1, 2017. Updated OpenVX adopters program and OpenVX 1.2 conformance test suite was released on November 21, 2017. OpenVX 1.2.1 was released on November 27, 2018. OpenVX 1.3 was released on October 22, 2019. == Implementations, frameworks and libraries == AMD MIVisionX Archived 2019-08-05 at the Wayback Machine - for AMD's CPUs and GPUs. Cadence - for Cadence Design Systems's Tensilica Vision DSPs. Imagination - for Imagination Technologies's PowerVR GPUs Synopsys - for Synopsys' DesignWare EV Vision Processors Texas Instruments’ OpenVX (TIOVX) - for Texas Instruments’ Jacinto™ ADAS SoCs. NVIDIA VisionWorks - for CUDA-capable Nvidia GPUs and SoCs. OpenVINO - for Intel's CPUs, GPUs, VPUs, and FPGAs.
Read more →
Smart object

A smart object is an object that enhances the interaction with not only people but also with other smart objects. Also known as smart connected products or smart connected things (SCoT), they are products, assets and other things embedded with processors, sensors, software and connectivity that allow data to be exchanged between the product and its environment, manufacturer, operator/user, and other products and systems. Connectivity also enables some capabilities of the product to exist outside the physical device, in what is known as the product cloud. The data collected from these products can be then analysed to inform decision-making, enable operational efficiencies and continuously improve the performance of the product. It can not only refer to interaction with physical world objects but also to interaction with virtual (computing environment) objects. A smart physical object may be created either as an artifact or manufactured product or by embedding electronic tags such as RFID tags or sensors into non-smart physical objects. Smart virtual objects are created as software objects that are intrinsic when creating and operating a virtual or cyber world simulation or game. The concept of a smart object has several origins and uses, see History. There are also several overlapping terms, see also smart device, tangible object or tangible user interface and Thing as in the Internet of things. == History == In the early 1990s, Mark Weiser, from whom the term ubiquitous computing originated, referred to a vision "When almost every object either contains a computer or can have a tab attached to it, obtaining information will be trivial", Although Weiser did not specifically refer to an object as being smart, his early work did imply that smart physical objects are smart in the sense that they act as digital information sources. Hiroshi Ishii and Brygg Ullmer refer to tangible objects in terms of tangibles bits or tangible user interfaces that enable users to "grasp & manipulate" bits in the center of users' attention by coupling the bits with everyday physical objects and architectural surfaces. The smart object concept was introduced by Marcelo Kallman and Daniel Thalmann as an object that can describe its own possible interactions. The main focus here is to model interactions of smart virtual objects with virtual humans, agents, in virtual worlds. The opposite approach to smart objects is 'plain' objects that do not provide this information. The additional information provided by this concept enables far more general interaction schemes, and can greatly simplify the planner of an artificial intelligence agent. In contrast to smart virtual objects used in virtual worlds, Lev Manovich focuses on physical space filled with electronic and visual information. Here, "smart objects" are described as "objects connected to the Net; objects that can sense their users and display smart behaviour". More recently in the early 2010s, smart objects are being proposed as a key enabler for the vision of the Internet of things. The combination of the Internet and emerging technologies such as near field communications, real-time localization, and embedded sensors enables everyday objects to be transformed into smart objects that can understand and react to their environment. Such objects are building blocks for the Internet of things and enable novel computing applications. In 2018, one of the world's first smart houses was built in Klaukkala, Finland in the form of a five-floor apartment block, using the Kone Residential Flow solution created by KONE, allowing even a smartphone to act as a home key. == Characteristics == Although we can view interaction with physical smart object in the physical world as distinct from interaction with virtual smart objects in a virtual simulated world, these can be related. Poslad considers the progression of: how humans use models of smart objects situated in the physical world to enhance human to physical world interaction; versus how smart physical objects situated in the physical world can model human interaction in order to lessen the need for human to physical world interaction; versus how virtual smart objects by modelling both physical world objects and modelling humans as objects and their subsequent interactions can form a predominantly smart virtual object environment. === Smart physical objects === The concept smart for a smart physical object simply means that it is active, digital, networked, can operate to some extent autonomously, is reconfigurable and has local control of the resources it needs such as energy, data storage, etc. Note, a smart object does not necessarily need to be intelligent as in exhibiting a strong essence of artificial intelligence—although it can be designed to also be intelligent. Physical world smart objects can be described in terms of three properties: Awareness: is a smart object's ability to understand (that is, sense, interpret, and react to) events and human activities occurring in the physical world. Representation: refers to a smart object's application and programming model—in particular, programming abstractions. Interaction: denotes the object's ability to converse with the user in terms of input, output, control, and feedback. Based upon these properties, these have been classified into three types: Activity-Aware Smart Objects: Are objects that can record information about work activities and its own use. Policy-Aware Smart Objects: Are objects that are activity-aware Objects can interpret events and activities with respect to predefined organizational policies. Process-Aware Smart Objects: Processes play a fundamental role in industrial work management and operation. A process is a collection of related activities or tasks that are ordered according to their position in time and space. === Smart virtual objects === For the virtual object in a virtual world case, an object is called smart when it has the ability to describe its possible interactions. This focuses on constructing a virtual world using only virtual objects that contain their own interaction information. There are four basic elements to constructing such a smart virtual object framework. Object properties: physical properties and a text description Interaction information: position of handles, buttons, grips, and the like Object behavior: different behaviors based on state variables Agent behaviors: description of the behavior an agent should follow when using the object Some versions of smart objects also include animation information in the object information, but this is not considered to be an efficient approach, since this can make objects inappropriately oversized. === Categorization === The terms smart, connected product or smart product can be confusing as it is used to cover a broad range of different products, ranging from smart home appliances (e.g., smart bathroom scales or smart light bulbs) to smart cars (e.g., Tesla). While these products share certain similarities, they often differ substantially in their capabilities. Raff et al. developed a conceptual framework that distinguishes different smart products based on their capabilities, which features 4 types of smart product archetypes (in ascending order of "smartness"). Digital Connected Responsive Intelligent == Advantages == Smart, connected products have three primary components: Physical – made up of the product's mechanical and electrical parts. Smart – made up of sensors, microprocessors, data storage, controls, software, and an embedded operating system with enhanced user interface. Connectivity – made up of ports, antennae, and protocols enabling wired/wireless connections that serve two purposes, it allows data to be exchanged with the product and enables some functions of the product to exist outside the physical device. Each component expands the capabilities of one another resulting in "a virtuous cycle of value improvement". First, the smart components of a product amplify the value and capabilities of the physical components. Then, connectivity amplifies the value and capabilities of the smart components. These improvements include: Monitoring of the product's conditions, its external environment, and its operations and usage. Control of various product functions to better respond to changes in its environment, as well as to personalize the user experience. Optimization of the product's overall operations based on actual performance data, and reduction of downtimes through predictive maintenance and remote service. Autonomous product operation, including learning from their environment, adapting to users' preferences and self-diagnosing and service. === The Internet of things (IoT) === The Internet of things is the network of physical objects that contain embedded technology to communicate and sense or interact with their internal states or the external environment. The phrase "Internet of things" reflects the gro
Read more →
Unified Modeling Language

The Unified Modeling Language (UML) is a general-purpose, object-oriented, visual modeling language that provides a way to visualize the architecture and design of a system, similar to the function of a blueprint. UML defines notation for many types of diagrams which focus on aspects such as behavior, interaction, and structure. UML is both a formal metamodel and a collection of graphical templates. The metamodel defines the elements in an object-oriented model such as classes and properties. It is essentially the same thing as the metamodel in object-oriented programming (OOP), however for OOP, the metamodel is primarily used at run time to dynamically inspect and modify an application object model. The UML metamodel provides a mathematical, formal foundation for the graphic views used in the modeling language to describe an emerging system. UML was created in an attempt to define a standard language for object-oriented programming at the OOPSLA '95 Conference. Originally, Grady Booch and James Rumbaugh merged their models into a unified model. This was followed by Booch's company Rational Software purchasing Ivar Jacobson's Objectory company and merging their model into the UML. At the time Rational and Objectory were two of the dominant players in the small world of independent vendors of object-oriented tools and methods. The Object Management Group (OMG) then took ownership of UML. The creation of UML was motivated by the desire to standardize the disparate nature of notational systems and approaches to software design at the time. In 1997, UML was adopted as a standard by the Object Management Group (OMG) and has been managed by this organization ever since. In 2005, UML was also published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) as the ISO/IEC 19501 standard. Since then the standard has been periodically revised to cover the latest revision of UML. Most developers do not use UML per se, but instead produce more informal diagrams, often hand-drawn. These diagrams, however, often include elements from UML. == Use == UML is primarily used for software development (in any industry or domain) but also used outside elsewhere including business processes, system functions, database schemas, workflow in the legal systems, medical electronics, Health care systems, and hardware design.. The UML is used by the OMG itself to define other OMG products such as the Unified Architecture Framework (UAF) and the Systems Modelling Language (SysML) v1. UML is designed for use with many object-oriented software development methods, both today and for the methods when it was first developed – including OMT, Booch method, Objectory, and especially RUP, which it was originally intended to be used with when work began at Rational Software. Although originally intended for object-oriented design documentation, UML has been used effectively in other contexts such as modeling business process. As UML is not inherently linked to a particular programming language, it can be used for modeling a system independent of language. Some UML tools generate source code from a UML model. === Elements === UML diagrams support visualizing system aspects like: Use case diagram for specifying user interactions with systems Class diagram for specifying structures, including data structures Activity diagram for specifying business process workflows Component diagram for specifying how components interface with other components Deployment diagram for specifying how components are deployed and executed on computational nodes In addition to syntactical (notational) elements with well-defined semantics, UML diagrams also allow for free-form comments (notes) that explain aspects such as usage, constraints, and intents. === Sharing === UML models can be exchanged among UML tools via the XML Metadata Interchange (XMI) format. === Cardinality notation === As with database Chen, Bachman, and ISO ER diagrams, class models are specified to use "look-across" cardinalities, even though several authors (Merise, Elmasri & Navathe, amongst others) prefer same-side or "look-here" for roles and both minimum and maximum cardinalities. Recent researchers (Feinerer and Dullea et al.) have shown that the "look-across" technique used by UML and ER diagrams is less effective and less coherent when applied to n-ary relationships of order strictly greater than 2. Feinerer says: "Problems arise if we operate under the look-across semantics as used for UML associations. Hartmann investigates this situation and shows how and why different transformations fail.", and: "As we will see on the next few pages, the look-across interpretation introduces several difficulties which prevent the extension of simple mechanisms from binary to n-ary associations." === Artifacts === An artifact is the "specification of a physical piece of information that is used or produced by a software development process, or by deployment and operation of a system" including models, source code, scripts, executables, tables in database systems, development deliverables, a design documents, and email messages. An artifact is the physical entity that is deployed to a node. Other UML elements such as classes and components are first manifest into artifacts and instances of these artifacts are then deployed. Artifacts can be composed of other artifacts. === Metamodeling === The OMG developed a metamodeling architecture to define UML, called the Meta-Object Facility (MOF). MOF is designed as a four-layered architecture, as shown in the image at right. It provides a meta-meta model at the top, called the M3 layer. This M3-model is the language used by Meta-Object Facility to build metamodels, called M2-models. The most prominent example of a Layer 2 Meta-Object Facility model is the UML metamodel, which describes UML itself. These M2-models describe elements of the M1-layer, and thus M1-models. These would be, for example, models written in UML. The last layer is the M0-layer or data layer. It is used to describe runtime instances of the system. The metamodel can be extended using a mechanism called stereotyping. This has been criticized as being insufficient/untenable by Brian Henderson-Sellers and Cesar Gonzalez-Perez in "Uses and Abuses of the Stereotype Mechanism in UML 1.x and 2.0". == Diagrams == UML 2 defines many types of diagrams – shown as a taxonomy in the image. === Structure diagrams === Structure diagrams emphasize the structure of the system – using objects, classifiers, relationships, attributes and operations. They are used to document software architecture. Class diagram – Describes the structure of a class Component diagram – Describes how a software system is split into components and dependencies between the components Composite structure diagram Deployment diagram Object diagram Package diagram Profile diagram === Behavior diagrams === Behavior diagrams emphasize the behavior of a system by showing collaborations among objects and changes to the internal states of objects. They are used to describe the functionality of a system. Activity diagram – Describes the business and operational activities of components State machine diagram Use case diagram – Depicts of a user's interaction with a system === Interaction diagrams === Interaction diagrams, a subset of behavior diagrams, emphasize the flow of control and data between components of a system. Communication diagram – shows communication between components Interaction overview diagram Sequence diagram – shows interactions arranged in time sequence; can be drawn via tools such as Lucidchart and Draw.io Timing diagram – focuses on timing constraints === Examples === == Adoption == In 2013, UML had been marketed by OMG for many contexts, but aimed primarily at software development with limited success. It has been treated, at times, as a design silver bullet, which leads to problems. UML misuse includes overuse (designing every part of the system with it, which is unnecessary) and assuming that novices can design with it. It is considered a large language, with many constructs. Some people (including Jacobson) feel that UML's size hinders learning and therefore uptake. Visual Studio removed support for UML in 2016 due to lack of use. == History == UML has evolved since the second half of the 1990s and has its roots in the object-oriented programming methods developed in the late 1980s and early 1990s. The image shows a timeline of the history of UML and other object-oriented modeling methods and notation. === Origin === Rational Software hired James Rumbaugh from General Electric in 1994 and after that, the company became the source for two of the most popular object-oriented modeling approaches of the day: Rumbaugh's object-modeling technique (OMT) and Grady Booch's method. They were soon assisted in their efforts by Ivar Jacobson, the creator of the object-oriented software engineeri
Read more →
Writesonic

Writesonic is an AI visibility and generative engine optimization (GEO) platform used by enterprises, digital agencies, direct-to-consumer (D2C) companies, and fast-growing brands to understand and improve how they are represented in AI-generated search and answer systems. The platform analyzes how brands appear in AI answers, compares their visibility and citations against competitors, and provides tools to create and optimize on-site content and secure mentions across third-party sources, discussion forums, and user-generated platforms that influence AI outputs. == History == Writesonic was founded by Samanyou Garg in October 2020 in San Francisco, California. The company initially operated as Magicflow before adopting its current name. In its seed round, the company raised $2.5 million from investors including Y-Combinator, HOF Capital, and Soma Capital. The company began with AI-powered content generation tools. In 2023, it expanded into AI-enhanced search engine optimization. In 2024, the company launched an AI agent specifically designed for SEO tasks, with integrations to platforms including Ahrefs, Google Keyword Planner, Keywords Everywhere, and Google Search Console. This was among the first specialized AI agents developed for SEO automation. Around the same time, Writesonic expanded its product line into Generative engine optimization (GEO), developing tools to analyze and improve how brands are represented in AI-generated search and answer environments. However, it is currently being challenged in the market with competitors such as Profound (known for their dashboards) and Meridian (known for their execution). == Technology and features == In 2024, the company introduced an artificial intelligence agent designed to automate search engine optimization (SEO) tasks. The agent integrates with platforms such as Ahrefs, Google Keyword Planner, Keywords Everywhere, and Google Search Console to conduct technical audits, perform keyword research, carry out competitive analysis, and assist in strategy development. It is capable of identifying content gaps, suggesting optimization measures, and generating SEO strategies using real-time data from the integrated platforms. The platform also includes features for content strategy, optimization, and management. It makes use of large language models such as GPT-5, Claude Opus 4.1, and Claude Sonnet 4.5, in combination with proprietary workflows for fact-checking, internal linking, and content structure optimization.
Read more →
AlphaEvolve

AlphaEvolve is an evolutionary coding agent for designing advanced algorithms based on large language models such as Gemini. It was developed by Google DeepMind and unveiled in May 2025. == Design == AlphaEvolve aims to autonomously discover and refine algorithms through a combination of large language models (LLMs) and evolutionary computation. AlphaEvolve needs an evaluation function with metrics to optimize, and an initial algorithm. At each step, AlphaEvolve uses the LLM to produce variants of the existing algorithms, and then selects the most effective ones. Unlike domain-specific predecessors like AlphaFold or AlphaTensor, AlphaEvolve is designed as a general-purpose system. It can operate across a wide array of scientific and engineering tasks by automatically modifying code and optimizing for multiple objectives. Its architecture allows it to evaluate code programmatically, reducing reliance on human input and mitigating risks such as hallucinations common in standard LLM outputs. == Achievements == According to Google, across a selection of 50 open mathematical problems, the model was able to rediscover state-of-the-art solutions 75% of the time and discovered improved solutions 20% of the time, for example advancing the kissing number problem. AlphaEvolve was also used to optimize Google's computing ecosystem. Improved data center scheduling heuristics, enabled the recovery of 0.7% of stranded resources. It was also used to optimize TPU circuit design and Gemini's training matrix multiplication kernel. == Open source implementations == Following the publication of AlphaEvolve, several open source implementations have been developed by the research community. One such implementation is OpenEvolve, which implements distributed evolutionary algorithms, multi-language support, integration with various large language model providers, and automated discovery of high-performance GPU kernels that outperform expert-engineered baselines.
Read more →
CLAWS (linguistics)

The Constituent Likelihood Automatic Word-tagging System (CLAWS) is a program that performs part-of-speech tagging. It was developed in the 1980s at Lancaster University by the University Centre for Computer Corpus Research on Language. It has an overall accuracy rate of 96–97% with the latest version (CLAWS4) tagging around 100 million words of the British National Corpus. == History == A Part-Of-Speech Tagger (POS Tagger) is a piece of software that reads text in some language and assigns parts of speech to each word (and other token), such as noun, verb, adjective, etc., although generally computational applications use more fine-grained POS tags like 'noun-plural'. Developed in the early 1980s, CLAWS was built to fill the ever-growing gap created by always-changing POS necessities. Originally created to add part-of-speech tags to the LOB corpus of British English, the CLAWS tagset has since been adapted to other languages as well, including Urdu and Arabic. Since its inception, CLAWS has been hailed for its functionality and adaptability. Still, it is not without flaws, and though it boasts an error-rate of only 1.5% when judged in major categories, CLAWS still remains with c.3.3% ambiguities unresolved. Ambiguity arises in cases such as with the word flies, and whether it should be classified as a noun or a verb. It's these ambiguities that will require the various upgrades and tagsets that CLAWS will endure. == Rules and processing == CLAWS uses a Hidden Markov model to determine the likelihood of sequences of words in anticipating each part-of-speech label. === Sample output === This excerpt from Bram Stoker's Dracula (1897) has been tagged using both the CLAWS C5 and C7 tagsets. This is what a CLAWS output will generally look like, with the most likely part-of-speech tag following each word. == Tagsets == === CLAWS1 tagset === The first tagset developed in CLAWS, CLAWS1 tagset, has 132 word tags. In terms of form and application, C1 tagset is similar to Brown Corpus tags. See Table of tags in C1 tagset here. === CLAWS2 tagset === From 1983 to 1986, updated versions leading to CLAWS2 were part of a larger attempt to deal with aspects such as recognizing sentence breaks, in order to avoid the need for manual pre-processing of a text before the tags were applied, moving instead to optional manual post-editing to adjust the output of the automatic annotation, if needed. The CLAWS2 tagset has 166 word tags. See Table of tags in C2 tagset here. === CLAWS4 tagset === The CLAWS4 was used for the 100-million-word British National Corpus (BNC). A general-purpose grammatical tagger, it is a successor of the CLAWS1 tagger. In tagging the BNC, the many rounds of work that went into CLAWS4 focused on making the CLAWS program independent from the tagsets. For example, the BNC project used two tagset versions: "a main tagset (C5) with 62 tags with which the whole of the corpus has been tagged, and a larger (C7) tagset with 152 tags, which has been used to make a selected 'core' sample corpus of two million words." The latest version of CLAWS4 is offered by UCREL, a research center of Lancaster University. === CLAWS5 tagset === The CLAWS5 tagset, which was used for BNC, has over 60 tags. See Table of tags in C5 tagset here. === CLAWS6 tagset === The CLAWS6 tagset was used for the BNC sampler corpus and the COLT corpus. It has over 160 tags, including 13 determiner subtypes. See Table of tags in C6 tagset here. === CLAWS7 tagset === The standard CLAWS7 tagset is used currently. It is only different in the punctuation tags when compared to the CLAWS6 tagset. See Table of tags in C7 tagset here. === CLAWS8 tagset === CLAWS8 tagset was extended from C7 tagset with further distinctions in the determiner and pronoun categories, as well as 37 new auxiliary tags for forms of be, do, and have. See Table of tags in C8 tagset here
Read more →
Yale shooting problem

The Yale shooting problem is a conundrum or scenario in formal situational logic on which early logical solutions to the frame problem fail. The name of this problem comes from a scenario proposed by its inventors, Steve Hanks and Drew McDermott, working at Yale University when they proposed it. In this scenario, Fred (later identified as a turkey) is initially alive and a gun is initially unloaded. Loading the gun, waiting for a moment, and then shooting the gun at Fred is expected to kill Fred. However, if inertia is formalized in logic by minimizing the changes in this situation, then it cannot be uniquely proved that Fred is dead after loading, waiting, and shooting. In one solution, Fred indeed dies; in another (also logically correct) solution, the gun becomes mysteriously unloaded and Fred survives. Technically, this scenario is described by two fluents (a fluent is a condition that can change truth value over time): a l i v e {\displaystyle alive} and l o a d e d {\displaystyle loaded} . Initially, the first condition is true and the second is false. Then, the gun is loaded, some time passes, and the gun is fired. Such problems can be formalized in logic by considering four time points 0 {\displaystyle 0} , 1 {\displaystyle 1} , 2 {\displaystyle 2} , and 3 {\displaystyle 3} , and turning every fluent such as a l i v e {\displaystyle alive} into a predicate a l i v e ( t ) {\displaystyle alive(t)} depending on time. A direct formalization of the statement of the Yale shooting problem in logic is the following one: a l i v e ( 0 ) {\displaystyle alive(0)} ¬ l o a d e d ( 0 ) {\displaystyle \neg loaded(0)} t r u e → l o a d e d ( 1 ) {\displaystyle true\rightarrow loaded(1)} l o a d e d ( 2 ) → ¬ a l i v e ( 3 ) {\displaystyle loaded(2)\rightarrow \neg alive(3)} The first two formulae represent the initial state. The third formula formalizes the effect of loading the gun at time 1 {\displaystyle 1} . The fourth formula formalizes the effect of shooting at Fred at time 2 {\displaystyle 2} . This is a simplified formalization in which action names are neglected and the effects of actions are directly specified for the time points in which the actions are executed. See situation calculus for details. The formulae above, while being direct formalizations of the known facts, do not suffice to correctly characterize the domain. Indeed, ¬ a l i v e ( 1 ) {\displaystyle \neg alive(1)} is consistent with all these formulae, although there is no reason to believe that Fred dies before the gun has been shot. The problem is that the formulae above only include the effects of actions, but do not specify that all fluents not changed by the actions remain the same. In other words, a formula a l i v e ( 0 ) ≡ a l i v e ( 1 ) {\displaystyle alive(0)\equiv alive(1)} must be added to formalize the implicit assumption that loading the gun only changes the value of l o a d e d {\displaystyle loaded} and not the value of a l i v e {\displaystyle alive} . The necessity of a large number of formulae stating the obvious fact that conditions do not change unless an action changes them is known as the frame problem. An early solution to the frame problem was based on minimizing the changes. In other words, the scenario is formalized by the formulae above (that specify only the effects of actions) and by the assumption that the changes in the fluents over time are as minimal as possible. The rationale is that the formulae above enforce all effect of actions to take place, while minimization should restrict the changes to exactly those due to the actions. In the Yale shooting scenario, one possible evaluation of the fluents in which the changes are minimized is the following one. This is the expected solution. It contains two fluent changes: l o a d e d {\displaystyle loaded} becomes true at time 1 and a l i v e {\displaystyle alive} becomes false at time 3. The following evaluation also satisfies all formulae above. In this evaluation, there are still two changes only: l o a d e d {\displaystyle loaded} becomes true at time 1 and false at time 2. As a result, this evaluation is considered a valid description of the evolution of the state, although there is no valid reason to explain l o a d e d {\displaystyle loaded} being false at time 2. The fact that minimization of changes leads to wrong solution is the motivation for the introduction of the Yale shooting problem. While the Yale shooting problem has been considered a severe obstacle to the use of logic for formalizing dynamical scenarios, solutions to it have been known since the late 1980s. One solution involves the use of predicate completion in the specification of actions: in this solution, the fact that shooting causes Fred to die is formalized by the preconditions: alive and loaded, and the effect is that alive changes value (since alive was true before, this corresponds to alive becoming false). By turning this implication into an if and only if statement, the effects of shooting are correctly formalized. (Predicate completion is more complicated when there is more than one implication involved.) A solution proposed by Erik Sandewall was to include a new condition of occlusion, which formalizes the “permission to change” for a fluent. The effect of an action that might change a fluent is therefore that the fluent has the new value, and that the occlusion is made (temporarily) true. What is minimized is not the set of changes, but the set of occlusions being true. Another constraint specifying that no fluent changes unless occlusion is true completes this solution. The Yale shooting scenario is also correctly formalized by the Reiter version of the situation calculus, the fluent calculus, and the action description languages. In 2005, the 1985 paper in which the Yale shooting scenario was first described received the AAAI Classic Paper award. In spite of being a solved problem, that example is still sometimes mentioned in recent research papers, where it is used as an illustrative example (e.g., for explaining the syntax of a new logic for reasoning about actions), rather than being presented as a problem.
Read more →
OpenVX

OpenVX is an open, royalty-free standard for cross-platform acceleration of computer vision applications. It is designed by the Khronos Group to facilitate portable, optimized and power-efficient processing of methods for vision algorithms. This is aimed for embedded and real-time programs within computer vision and related scenarios. It uses a connected graph representation of operations. == Overview == OpenVX specifies a higher level of abstraction for programming computer vision use cases than compute frameworks such as OpenCL. The high level makes the programming easy and the underlying execution will be efficient on different computing architectures. This is done while having a consistent and portable vision acceleration API. OpenVX is based on a connected graph of vision nodes that can execute the preferred chain of operations. It uses an opaque memory model, allowing to move image data between the host (CPU) memory and accelerator, such as GPU memory. As a result, the OpenVX implementation can optimize the execution through various techniques, such as acceleration on various processing units or dedicated hardware. This architecture facilitates applications programmed in OpenVX on different systems with different power and performance, including battery-sensitive, vision-enabled, wearable displays. OpenVX is complementary to the open source vision library OpenCV. OpenVX in some applications offers a better optimized graph management than OpenCV. == History == OpenVX 1.0 specification was released in October 2014. OpenVX sample implementation was released in December 2014. OpenVX 1.1 specification was released on May 2, 2016. OpenVX 1.2 was released on May 1, 2017. Updated OpenVX adopters program and OpenVX 1.2 conformance test suite was released on November 21, 2017. OpenVX 1.2.1 was released on November 27, 2018. OpenVX 1.3 was released on October 22, 2019. == Implementations, frameworks and libraries == AMD MIVisionX Archived 2019-08-05 at the Wayback Machine - for AMD's CPUs and GPUs. Cadence - for Cadence Design Systems's Tensilica Vision DSPs. Imagination - for Imagination Technologies's PowerVR GPUs Synopsys - for Synopsys' DesignWare EV Vision Processors Texas Instruments’ OpenVX (TIOVX) - for Texas Instruments’ Jacinto™ ADAS SoCs. NVIDIA VisionWorks - for CUDA-capable Nvidia GPUs and SoCs. OpenVINO - for Intel's CPUs, GPUs, VPUs, and FPGAs.
Read more →